- 01 Sep, 2023 14 commits
-
-
Edward Cree authored
When EF10 RXDP firmware is operating in cut-through mode, packet length is not known at the time the RX prefix is generated, so it is left as zero and RX event merging is inhibited to ensure that the length is available in the RX event. However, it has been found that in certain circumstances the RX events for these packets still get merged, meaning the driver cannot read the length from the RX event, and tries to use the length from the prefix. The resulting zero-length SKBs cause crashes in GRO since commit 1d11fa69 ("net-gro: remove GRO_DROP"), so add a check to the driver to detect these zero-length RX events and discard the packet. Signed-off-by:
Edward Cree <ecree.xilinx@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Sriram Yagnaraman says: ==================== Avoid TCP resets when using ECMP for load-balancing between multiple servers. All packets in the same flow (L3/L4 depending on multipath hash policy) should be directed to the same target, but after [0]/[1] we see stray packets directed towards other targets. This, for instance, causes RST to be sent on TCP connections. The first two patches solve the problem by ignoring route hints for destinations that are part of multipath group, by using new SKB flags for IPv4 and IPv6. The third patch is a selftest that tests the scenario. Thanks to Ido, for reviewing and suggesting a way forward in [2] and also suggesting how to write a selftest for this. v4->v5: - Fixed review comments from Ido v3->v4: - Remove single path test - Rebase to latest v2->v3: - Add NULL check for skb in fib6_select_path (Ido Schimmel) - Use fib_tests.sh for selftest instead of the forwarding suite (Ido Schimmel) v1->v2: - Update to commit messages describing the solution (Ido Schimmel) - Use perf stat to count fib table lookups in selftest (Ido Schimmel) ==================== Signed-off-by: -
Sriram Yagnaraman authored
The test uses perf stat to count the number of fib:fib_table_lookup tracepoint hits for IPv4 and the number of fib6:fib6_table_lookup for IPv6. The measured count is checked to be within 5% of the total number of packets sent via veth1. Signed-off-by:
Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by:
-
Sriram Yagnaraman authored
Route hints when the nexthop is part of a multipath group causes packets in the same receive batch to be sent to the same nexthop irrespective of the multipath hash of the packet. So, do not extract route hint for packets whose destination is part of a multipath group. A new SKB flag IP6SKB_MULTIPATH is introduced for this purpose, set the flag when route is looked up in fib6_select_path() and use it in ip6_can_use_hint() to check for the existence of the flag. Fixes: 197dbf24 ("ipv6: introduce and uses route look hints for list input.") Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Sriram Yagnaraman authored
Route hints when the nexthop is part of a multipath group causes packets in the same receive batch to be sent to the same nexthop irrespective of the multipath hash of the packet. So, do not extract route hint for packets whose destination is part of a multipath group. A new SKB flag IPSKB_MULTIPATH is introduced for this purpose, set the flag when route is looked up in ip_mkroute_input() and use it in ip_extract_route_hint() to check for the existence of the flag. Fixes: 02b24941 ("ipv4: use dst hint for ipv4 list receive") Signed-off-by:
-
Mohamed Khalfella authored
Commit bf5c25d6 ("skbuff: in skb_segment, call zerocopy functions once per nskb") added the call to zero copy functions in skb_segment(). The change introduced a bug in skb_segment() because skb_orphan_frags() may possibly change the number of fragments or allocate new fragments altogether leaving nrfrags and frag to point to the old values. This can cause a panic with stacktrace like the one below. [ 193.894380] BUG: kernel NULL pointer dereference, address: 00000000000000bc [ 193.895273] CPU: 13 PID: 18164 Comm: vh-net-17428 Kdump: loaded Tainted: G O 5.15.123+ #26 [ 193.903919] RIP: 0010:skb_segment+0xb0e/0x12f0 [ 194.021892] Call Trace: [ 194.027422] <TASK> [ 194.072861] tcp_gso_segment+0x107/0x540 [ 194.082031] inet_gso_segment+0x15c/0x3d0 [ 194.090783] skb_mac_gso_segment+0x9f/0x110 [ 194.095016] __skb_gso_segment+0xc1/0x190 [ 194.103131] netem_enqueue+0x290/0xb10 [sch_netem] [ 194.107071] dev_qdisc_enqueue+0x16/0x70 [ 194.110884] __dev_queue_xmit+0x63b/0xb30 [ 194.121670] bond_start_xmit+0x159/0x380 [bonding] [ 194.128506] dev_hard_start_xmit+0xc3/0x1e0 [ 194.131787] __dev_queue_xmit+0x8a0/0xb30 [ 194.138225] macvlan_start_xmit+0x4f/0x100 [macvlan] [ 194.141477] dev_hard_start_xmit+0xc3/0x1e0 [ 194.144622] sch_direct_xmit+0xe3/0x280 [ 194.147748] __dev_queue_xmit+0x54a/0xb30 [ 194.154131] tap_get_user+0x2a8/0x9c0 [tap] [ 194.157358] tap_sendmsg+0x52/0x8e0 [tap] [ 194.167049] handle_tx_zerocopy+0x14e/0x4c0 [vhost_net] [ 194.173631] handle_tx+0xcd/0xe0 [vhost_net] [ 194.176959] vhost_worker+0x76/0xb0 [vhost] [ 194.183667] kthread+0x118/0x140 [ 194.190358] ret_from_fork+0x1f/0x30 [ 194.193670] </TASK> In this case calling skb_orphan_frags() updated nr_frags leaving nrfrags local variable in skb_segment() stale. This resulted in the code hitting i >= nrfrags prematurely and trying to move to next frag_skb using list_skb pointer, which was NULL, and caused kernel panic. Move the call to zero copy functions before using frags and nr_frags. Fixes: bf5c25d6 ("skbuff: in skb_segment, call zerocopy functions once per nskb") Signed-off-by:
Mohamed Khalfella <mkhalfella@purestorage.com> Reported-by:
Amit Goyal <agoyal@purestorage.com> Cc: stable@vger.kernel.org Reviewed-by:
-
David S. Miller authored
Eric Dumazet says: ==================== net: another round of data-race annotations Series inspired by some syzbot reports, taking care of 4 socket fields that can be read locklessly. ==================== Signed-off-by: -
Eric Dumazet authored
sk->sk_bind_phc is read locklessly. Add corresponding annotations. Fixes: d463126e ("net: sock: extend SO_TIMESTAMPING for PHC binding") Signed-off-by:
-
Eric Dumazet authored
sk->sk_tsflags can be read locklessly, add corresponding annotations. Fixes: b9f40e21 ("net-timestamp: move timestamp flags out of sk_flags") Signed-off-by:
-
Eric Dumazet authored
msk->rmem_fwd_alloc can be read locklessly. Add mptcp_rmem_fwd_alloc_add(), similar to sk_forward_alloc_add(), and appropriate READ_ONCE()/WRITE_ONCE() annotations. Fixes: 6511882c ("mptcp: allocate fwd memory separately on the rx and tx path") Signed-off-by:
-
Eric Dumazet authored
Every time sk->sk_forward_alloc is read locklessly, add a READ_ONCE(). Add sk_forward_alloc_add() helper to centralize updates, to reduce number of WRITE_ONCE(). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Eric Dumazet authored
inet_sk_diag_fill() has been changed to use sk_forward_alloc_get(), but sk_get_meminfo() was forgotten. Fixes: 292e6077 ("net: introduce sk_forward_alloc_get()") Signed-off-by:
-
Eric Dumazet authored
We should not call trace_handshake_cmd_done_err() if socket lookup has failed. Also we should call trace_handshake_cmd_done_err() before releasing the file, otherwise dereferencing sock->sk can return garbage. This also reverts 7afc6d0a ("net/handshake: Fix uninitialized local variable") Unable to handle kernel paging request at virtual address dfff800000000003 KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [dfff800000000003] address between user and kernel address ranges Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 5986 Comm: syz-executor292 Not tainted 6.5.0-rc7-syzkaller-gfe4469582053 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : handshake_nl_done_doit+0x198/0x9c8 net/handshake/netlink.c:193 lr : handshake_nl_done_doit+0x180/0x9c8 sp : ffff800096e37180 x29: ffff800096e37200 x28: 1ffff00012dc6e34 x27: dfff800000000000 x26: ffff800096e373d0 x25: 0000000000000000 x24: 00000000ffffffa8 x23: ffff800096e373f0 x22: 1ffff00012dc6e38 x21: 0000000000000000 x20: ffff800096e371c0 x19: 0000000000000018 x18: 0000000000000000 x17: 0000000000000000 x16: ffff800080516cc4 x15: 0000000000000001 x14: 1fffe0001b14aa3b x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000003 x8 : 0000000000000003 x7 : ffff800080afe47c x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff800080a88078 x2 : 0000000000000001 x1 : 00000000ffffffa8 x0 : 0000000000000000 Call trace: handshake_nl_done_doit+0x198/0x9c8 net/handshake/netlink.c:193 genl_family_rcv_msg_doit net/netlink/genetlink.c:970 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1050 [inline] genl_rcv_msg+0x96c/0xc50 net/netlink/genetlink.c:1067 netlink_rcv_skb+0x214/0x3c4 net/netlink/af_netlink.c:2549 genl_rcv+0x38/0x50 net/netlink/genetlink.c:1078 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x660/0x8d4 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x834/0xb18 net/netlink/af_netlink.c:1914 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg net/socket.c:748 [inline] ____sys_sendmsg+0x56c/0x840 net/socket.c:2494 ___sys_sendmsg net/socket.c:2548 [inline] __sys_sendmsg+0x26c/0x33c net/socket.c:2577 __do_sys_sendmsg net/socket.c:2586 [inline] __se_sys_sendmsg net/socket.c:2584 [inline] __arm64_sys_sendmsg+0x80/0x94 net/socket.c:2584 __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155 el0_svc+0x58/0x16c arch/arm64/kernel/entry-common.c:678 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Code: 12800108 b90043e8 910062b3 d343fe68 (387b6908) Fixes: 3b3009ea ("net/handshake: Create a NETLINK service for handling handshake requests") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Michal Kubiak <michal.kubiak@intel.com> Signed-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2023-08-31 We've added 15 non-merge commits during the last 3 day(s) which contain a total of 17 files changed, 468 insertions(+), 97 deletions(-). The main changes are: 1) BPF selftest fixes: one flake and one related to clang18 testing, from Yonghong Song. 2) Fix a d_path BPF selftest failure after fast-forward from Linus' tree, from Jiri Olsa. 3) Fix a preempt_rt splat in sockmap when using raw_spin_lock_t, from John Fastabend. 4) Fix a xsk_diag_fill use-after-free race during socket cleanup, from Magnus Karlsson. 5) Fix xsk_build_skb to address a buggy dereference of an ERR_PTR(), from Tirthendu Sarkar. 6) Fix a bpftool build warning when compiled with -Wtype-limits, from Yafang Shao. 7) Several misc fixes and cleanups in standardization docs, from David Vernet. 8) Fix BPF selftest install to consider no_alu32/cpuv4/bpf-gcc flavors, from Björn Töpel. 9) Annotate a data race in bpf_long_memcpy for KCSAN, from Daniel Borkmann. 10) Extend documentation with a description for CO-RE relocations, from Eduard Zingerman. 11) Fix several invalid escape sequence warnings in bpf_doc.py script, from Vishal Chourasia. 12) Fix the instruction set doc wrt offset of BPF-to-BPF call, from Will Hawkins. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: Include build flavors for install target bpf: Annotate bpf_long_memcpy with data_race selftests/bpf: Fix d_path test bpf, docs: Fix invalid escape sequence warnings in bpf_doc.py xsk: Fix xsk_diag use-after-free error during socket cleanup bpf, docs: s/eBPF/BPF in standards documents bpf, docs: Add abi.rst document to standardization subdirectory bpf, docs: Move linux-notes.rst to root bpf docs tree bpf, sockmap: Fix preempt_rt splat when using raw_spin_lock_t docs/bpf: Add description for CO-RE relocations bpf, docs: Correct source of offset for program-local call selftests/bpf: Fix flaky cgroup_iter_sleepable subtest xsk: Fix xsk_build_skb() error: 'skb' dereferencing possible ERR_PTR() bpftool: Fix build warnings with -Wtype-limits bpf: Prevent inlining of bpf_fentry_test7() ==================== Link: https://lore.kernel.org/r/20230831210019.14417-1-daniel@iogearbox.netSigned-off-by:Jakub Kicinski <kuba@kernel.org>
-
- 31 Aug, 2023 14 commits
-
-
Björn Töpel authored
When using the "install" or targets depending on install, e.g. "gen_tar", the BPF machine flavors weren't included. A command like: | make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- O=/workspace/kbuild \ | HOSTCC=gcc FORMAT= SKIP_TARGETS="arm64 ia64 powerpc sparc64 x86 sgx" \ | -C tools/testing/selftests gen_tar would not include bpf/no_alu32, bpf/cpuv4, or bpf/bpf-gcc. Include the BPF machine flavors for "install" make target. Signed-off-by:
Björn Töpel <bjorn@rivosinc.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230831162954.111485-1-bjorn@kernel.org
-
Daniel Borkmann authored
syzbot reported a data race splat between two processes trying to update the same BPF map value via syscall on different CPUs: BUG: KCSAN: data-race in bpf_percpu_array_update / bpf_percpu_array_update write to 0xffffe8fffe7425d8 of 8 bytes by task 8257 on cpu 1: bpf_long_memcpy include/linux/bpf.h:428 [inline] bpf_obj_memcpy include/linux/bpf.h:441 [inline] copy_map_value_long include/linux/bpf.h:464 [inline] bpf_percpu_array_update+0x3bb/0x500 kernel/bpf/arraymap.c:380 bpf_map_update_value+0x190/0x370 kernel/bpf/syscall.c:175 generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1749 bpf_map_do_batch+0x2df/0x3d0 kernel/bpf/syscall.c:4648 __sys_bpf+0x28a/0x780 __do_sys_bpf kernel/bpf/syscall.c:5241 [inline] __se_sys_bpf kernel/bpf/syscall.c:5239 [inline] __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5239 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd write to 0xffffe8fffe7425d8 of 8 bytes by task 8268 on cpu 0: bpf_long_memcpy include/linux/bpf.h:428 [inline] bpf_obj_memcpy include/linux/bpf.h:441 [inline] copy_map_value_long include/linux/bpf.h:464 [inline] bpf_percpu_array_update+0x3bb/0x500 kernel/bpf/arraymap.c:380 bpf_map_update_value+0x190/0x370 kernel/bpf/syscall.c:175 generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1749 bpf_map_do_batch+0x2df/0x3d0 kernel/bpf/syscall.c:4648 __sys_bpf+0x28a/0x780 __do_sys_bpf kernel/bpf/syscall.c:5241 [inline] __se_sys_bpf kernel/bpf/syscall.c:5239 [inline] __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5239 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x0000000000000000 -> 0xfffffff000002788 The bpf_long_memcpy is used with 8-byte aligned pointers, power-of-8 size and forced to use long read/writes to try to atomically copy long counters. It is best-effort only and no barriers are here since it _will_ race with concurrent updates from BPF programs. The bpf_long_memcpy() is called from bpf(2) syscall. Marco suggested that the best way to make this known to KCSAN would be to use data_race() annotation. Reported-by: syzbot+97522333291430dd277f@syzkaller.appspotmail.com Suggested-by:
Marco Elver <elver@google.com> Signed-off-by:
-
Jiri Olsa authored
Recent commit [1] broke d_path test, because now filp_close is not called directly from sys_close, but eventually later when the file is finally released. As suggested by Hou Tao we don't need to re-hook the bpf program, but just instead we can use sys_close_range to trigger filp_close synchronously. [1] 021a160a ("fs: use __fput_sync in close(2)") Suggested-by:
Hou Tao <houtao@huaweicloud.com> Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Signed-off-by:
-
Vishal Chourasia authored
The script bpf_doc.py generates multiple SyntaxWarnings related to invalid escape sequences when executed with Python 3.12. These warnings do not appear in Python 3.10 and 3.11 and do not affect the kernel build, which completes successfully. This patch resolves these SyntaxWarnings by converting the relevant string literals to raw strings or by escaping backslashes. This ensures that backslashes are interpreted as literal characters, eliminating the warnings. Reported-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by:
Vishal Chourasia <vishalc@linux.ibm.com> Signed-off-by:
Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20230829074931.2511204-1-vishalc@linux.ibm.com
-
Magnus Karlsson authored
Fix a use-after-free error that is possible if the xsk_diag interface is used after the socket has been unbound from the device. This can happen either due to the socket being closed or the device disappearing. In the early days of AF_XDP, the way we tested that a socket was not bound to a device was to simply check if the netdevice pointer in the xsk socket structure was NULL. Later, a better system was introduced by having an explicit state variable in the xsk socket struct. For example, the state of a socket that is on the way to being closed and has been unbound from the device is XSK_UNBOUND. The commit in the Fixes tag below deleted the old way of signalling that a socket is unbound, setting dev to NULL. This in the belief that all code using the old way had been exterminated. That was unfortunately not true as the xsk diagnostics code was still using the old way and thus does not work as intended when a socket is going down. Fix this by introducing a test against the state variable. If the socket is in the state XSK_UNBOUND, simply abort the diagnostic's netlink operation. Fixes: 18b1ab7a ("xsk: Fix race at socket teardown") Reported-by: syzbot+822d1359297e2694f873@syzkaller.appspotmail.com Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by:
-
Florian Westphal authored
New skbs allocated via nf_send_reset() have skb->dev == NULL. fib*_rules_early_flow_dissect helpers already have a 'struct net' argument but its not passed down to the flow dissector core, which will then WARN as it can't derive a net namespace to use: WARNING: CPU: 0 PID: 0 at net/core/flow_dissector.c:1016 __skb_flow_dissect+0xa91/0x1cd0 [..] ip_route_me_harder+0x143/0x330 nf_send_reset+0x17c/0x2d0 [nf_reject_ipv4] nft_reject_inet_eval+0xa9/0xf2 [nft_reject_inet] nft_do_chain+0x198/0x5d0 [nf_tables] nft_do_chain_inet+0xa4/0x110 [nf_tables] nf_hook_slow+0x41/0xc0 ip_local_deliver+0xce/0x110 .. Cc: Stanislav Fomichev <sdf@google.com> Cc: David Ahern <dsahern@kernel.org> Cc: Ido Schimmel <idosch@nvidia.com> Fixes: 812fa71f ("netfilter: Dissect flow after packet mangling") Link: https://bugzilla.kernel.org/show_bug.cgi?id=217826Signed-off-by:
Florian Westphal <fw@strlen.de> Reviewed-by:
Paolo Abeni <pabeni@redhat.com>
-
Eric Dumazet authored
syzbot is playing with IPV6_ADDRFORM quite a lot these days, and managed to hit the WARN_ON_ONCE(1) in sk_mc_loop() We have many more similar issues to fix. WARNING: CPU: 1 PID: 1593 at net/core/sock.c:782 sk_mc_loop+0x165/0x260 Modules linked in: CPU: 1 PID: 1593 Comm: kworker/1:3 Not tainted 6.1.40-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 Workqueue: events_power_efficient gc_worker RIP: 0010:sk_mc_loop+0x165/0x260 net/core/sock.c:782 Code: 34 1b fd 49 81 c7 18 05 00 00 4c 89 f8 48 c1 e8 03 42 80 3c 20 00 74 08 4c 89 ff e8 25 36 6d fd 4d 8b 37 eb 13 e8 db 33 1b fd <0f> 0b b3 01 eb 34 e8 d0 33 1b fd 45 31 f6 49 83 c6 38 4c 89 f0 48 RSP: 0018:ffffc90000388530 EFLAGS: 00010246 RAX: ffffffff846d9b55 RBX: 0000000000000011 RCX: ffff88814f884980 RDX: 0000000000000102 RSI: ffffffff87ae5160 RDI: 0000000000000011 RBP: ffffc90000388550 R08: 0000000000000003 R09: ffffffff846d9a65 R10: 0000000000000002 R11: ffff88814f884980 R12: dffffc0000000000 R13: ffff88810dbee000 R14: 0000000000000010 R15: ffff888150084000 FS: 0000000000000000(0000) GS:ffff8881f6b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000180 CR3: 000000014ee5b000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> [<ffffffff8507734f>] ip6_finish_output2+0x33f/0x1ae0 net/ipv6/ip6_output.c:83 [<ffffffff85062766>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline] [<ffffffff85062766>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211 [<ffffffff85061f8c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [<ffffffff85061f8c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232 [<ffffffff852071cf>] dst_output include/net/dst.h:444 [inline] [<ffffffff852071cf>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161 [<ffffffff83618fb4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline] [<ffffffff83618fb4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff83618fb4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff83618fb4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff8361ddd9>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84763fc0>] netdev_start_xmit include/linux/netdevice.h:4925 [inline] [<ffffffff84763fc0>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84763fc0>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff8494c650>] sch_direct_xmit+0x2a0/0x9c0 net/sched/sch_generic.c:342 [<ffffffff8494d883>] qdisc_restart net/sched/sch_generic.c:407 [inline] [<ffffffff8494d883>] __qdisc_run+0xb13/0x1e70 net/sched/sch_generic.c:415 [<ffffffff8478c426>] qdisc_run+0xd6/0x260 include/net/pkt_sched.h:125 [<ffffffff84796eac>] net_tx_action+0x7ac/0x940 net/core/dev.c:5247 [<ffffffff858002bd>] __do_softirq+0x2bd/0x9bd kernel/softirq.c:599 [<ffffffff814c3fe8>] invoke_softirq kernel/softirq.c:430 [inline] [<ffffffff814c3fe8>] __irq_exit_rcu+0xc8/0x170 kernel/softirq.c:683 [<ffffffff814c3f09>] irq_exit_rcu+0x9/0x20 kernel/softirq.c:695 Fixes: 7ad6848c ("ip: fix mc_loop checks for tunnels with multicast outer addresses") Reported-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230830101244.1146934-1-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
syzbot complained about a data-race in fib_table_lookup() [1] Add appropriate annotations to document it. [1] BUG: KCSAN: data-race in fib_release_info / fib_table_lookup write to 0xffff888150f31744 of 1 bytes by task 1189 on cpu 0: fib_release_info+0x3a0/0x460 net/ipv4/fib_semantics.c:281 fib_table_delete+0x8d2/0x900 net/ipv4/fib_trie.c:1777 fib_magic+0x1c1/0x1f0 net/ipv4/fib_frontend.c:1106 fib_del_ifaddr+0x8cf/0xa60 net/ipv4/fib_frontend.c:1317 fib_inetaddr_event+0x77/0x200 net/ipv4/fib_frontend.c:1448 notifier_call_chain kernel/notifier.c:93 [inline] blocking_notifier_call_chain+0x90/0x200 kernel/notifier.c:388 __inet_del_ifa+0x4df/0x800 net/ipv4/devinet.c:432 inet_del_ifa net/ipv4/devinet.c:469 [inline] inetdev_destroy net/ipv4/devinet.c:322 [inline] inetdev_event+0x553/0xaf0 net/ipv4/devinet.c:1606 notifier_call_chain kernel/notifier.c:93 [inline] raw_notifier_call_chain+0x6b/0x1c0 kernel/notifier.c:461 call_netdevice_notifiers_info net/core/dev.c:1962 [inline] call_netdevice_notifiers_mtu+0xd2/0x130 net/core/dev.c:2037 dev_set_mtu_ext+0x30b/0x3e0 net/core/dev.c:8673 do_setlink+0x5be/0x2430 net/core/rtnetlink.c:2837 rtnl_setlink+0x255/0x300 net/core/rtnetlink.c:3177 rtnetlink_rcv_msg+0x807/0x8c0 net/core/rtnetlink.c:6445 netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2549 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6463 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x56f/0x640 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x665/0x770 net/netlink/af_netlink.c:1914 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg net/socket.c:748 [inline] sock_write_iter+0x1aa/0x230 net/socket.c:1129 do_iter_write+0x4b4/0x7b0 fs/read_write.c:860 vfs_writev+0x1a8/0x320 fs/read_write.c:933 do_writev+0xf8/0x220 fs/read_write.c:976 __do_sys_writev fs/read_write.c:1049 [inline] __se_sys_writev fs/read_write.c:1046 [inline] __x64_sys_writev+0x45/0x50 fs/read_write.c:1046 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffff888150f31744 of 1 bytes by task 21839 on cpu 1: fib_table_lookup+0x2bf/0xd50 net/ipv4/fib_trie.c:1585 fib_lookup include/net/ip_fib.h:383 [inline] ip_route_output_key_hash_rcu+0x38c/0x12c0 net/ipv4/route.c:2751 ip_route_output_key_hash net/ipv4/route.c:2641 [inline] __ip_route_output_key include/net/route.h:134 [inline] ip_route_output_flow+0xa6/0x150 net/ipv4/route.c:2869 send4+0x1e7/0x500 drivers/net/wireguard/socket.c:61 wg_socket_send_skb_to_peer+0x94/0x130 drivers/net/wireguard/socket.c:175 wg_socket_send_buffer_to_peer+0xd6/0x100 drivers/net/wireguard/socket.c:200 wg_packet_send_handshake_initiation drivers/net/wireguard/send.c:40 [inline] wg_packet_handshake_send_worker+0x10c/0x150 drivers/net/wireguard/send.c:51 process_one_work+0x434/0x860 kernel/workqueue.c:2600 worker_thread+0x5f2/0xa10 kernel/workqueue.c:2751 kthread+0x1d7/0x210 kernel/kthread.c:389 ret_from_fork+0x2e/0x40 arch/x86/kernel/process.c:145 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 value changed: 0x00 -> 0x01 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 21839 Comm: kworker/u4:18 Tainted: G W 6.5.0-syzkaller #0 Fixes: dccd9ecc ("ipv4: Do not use dead fib_info entries.") Reported-by:
-
Eric Dumazet authored
sk->sk_wmem_queued can be read locklessly from sctp_poll() Use sk_wmem_queued_add() when the field is changed, and add READ_ONCE() annotations in sctp_writeable() and sctp_assocs_seq_show() syzbot reported: BUG: KCSAN: data-race in sctp_poll / sctp_wfree read-write to 0xffff888149d77810 of 4 bytes by interrupt on cpu 0: sctp_wfree+0x170/0x4a0 net/sctp/socket.c:9147 skb_release_head_state+0xb7/0x1a0 net/core/skbuff.c:988 skb_release_all net/core/skbuff.c:1000 [inline] __kfree_skb+0x16/0x140 net/core/skbuff.c:1016 consume_skb+0x57/0x180 net/core/skbuff.c:1232 sctp_chunk_destroy net/sctp/sm_make_chunk.c:1503 [inline] sctp_chunk_put+0xcd/0x130 net/sctp/sm_make_chunk.c:1530 sctp_datamsg_put+0x29a/0x300 net/sctp/chunk.c:128 sctp_chunk_free+0x34/0x50 net/sctp/sm_make_chunk.c:1515 sctp_outq_sack+0xafa/0xd70 net/sctp/outqueue.c:1381 sctp_cmd_process_sack net/sctp/sm_sideeffect.c:834 [inline] sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1366 [inline] sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline] sctp_do_sm+0x12c7/0x31b0 net/sctp/sm_sideeffect.c:1169 sctp_assoc_bh_rcv+0x2b2/0x430 net/sctp/associola.c:1051 sctp_inq_push+0x108/0x120 net/sctp/inqueue.c:80 sctp_rcv+0x116e/0x1340 net/sctp/input.c:243 sctp6_rcv+0x25/0x40 net/sctp/ipv6.c:1120 ip6_protocol_deliver_rcu+0x92f/0xf30 net/ipv6/ip6_input.c:437 ip6_input_finish net/ipv6/ip6_input.c:482 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] ip6_input+0xbd/0x1b0 net/ipv6/ip6_input.c:491 dst_input include/net/dst.h:468 [inline] ip6_rcv_finish+0x1e2/0x2e0 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:303 [inline] ipv6_rcv+0x74/0x150 net/ipv6/ip6_input.c:309 __netif_receive_skb_one_core net/core/dev.c:5452 [inline] __netif_receive_skb+0x90/0x1b0 net/core/dev.c:5566 process_backlog+0x21f/0x380 net/core/dev.c:5894 __napi_poll+0x60/0x3b0 net/core/dev.c:6460 napi_poll net/core/dev.c:6527 [inline] net_rx_action+0x32b/0x750 net/core/dev.c:6660 __do_softirq+0xc1/0x265 kernel/softirq.c:553 run_ksoftirqd+0x17/0x20 kernel/softirq.c:921 smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164 kthread+0x1d7/0x210 kernel/kthread.c:389 ret_from_fork+0x2e/0x40 arch/x86/kernel/process.c:145 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 read to 0xffff888149d77810 of 4 bytes by task 17828 on cpu 1: sctp_writeable net/sctp/socket.c:9304 [inline] sctp_poll+0x265/0x410 net/sctp/socket.c:8671 sock_poll+0x253/0x270 net/socket.c:1374 vfs_poll include/linux/poll.h:88 [inline] do_pollfd fs/select.c:873 [inline] do_poll fs/select.c:921 [inline] do_sys_poll+0x636/0xc00 fs/select.c:1015 __do_sys_ppoll fs/select.c:1121 [inline] __se_sys_ppoll+0x1af/0x1f0 fs/select.c:1101 __x64_sys_ppoll+0x67/0x80 fs/select.c:1101 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x00019e80 -> 0x0000cc80 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 17828 Comm: syz-executor.1 Not tainted 6.5.0-rc7-syzkaller-00185-g28f20a19 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/20230830094519.950007-1-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
When setting a high number of flows (limit being 65536), fq_pie_timer() is currently using too much time as syzbot reported. Add logic to yield the cpu every 2048 flows (less than 150 usec on debug kernels). It should also help by not blocking qdisc fast paths for too long. Worst case (65536 flows) would need 31 jiffies for a complete scan. Relevant extract from syzbot report: rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 0-.... } 2663 jiffies s: 873 root: 0x1/. rcu: blocking rcu_node structures (internal RCU debug): Sending NMI from CPU 1 to CPUs 0: NMI backtrace for cpu 0 CPU: 0 PID: 5177 Comm: syz-executor273 Not tainted 6.5.0-syzkaller-00453-g727dbda1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 RIP: 0010:check_kcov_mode kernel/kcov.c:173 [inline] RIP: 0010:write_comp_data+0x21/0x90 kernel/kcov.c:236 Code: 2e 0f 1f 84 00 00 00 00 00 65 8b 05 01 b2 7d 7e 49 89 f1 89 c6 49 89 d2 81 e6 00 01 00 00 49 89 f8 65 48 8b 14 25 80 b9 03 00 <a9> 00 01 ff 00 74 0e 85 f6 74 59 8b 82 04 16 00 00 85 c0 74 4f 8b RSP: 0018:ffffc90000007bb8 EFLAGS: 00000206 RAX: 0000000000000101 RBX: ffffc9000dc0d140 RCX: ffffffff885893b0 RDX: ffff88807c075940 RSI: 0000000000000100 RDI: 0000000000000001 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffc9000dc0d178 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000555555d54380(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6b442f6130 CR3: 000000006fe1c000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <NMI> </NMI> <IRQ> pie_calculate_probability+0x480/0x850 net/sched/sch_pie.c:415 fq_pie_timer+0x1da/0x4f0 net/sched/sch_fq_pie.c:387 call_timer_fn+0x1a0/0x580 kernel/time/timer.c:1700 Fixes: ec97ecf1 ("net: sched: add Flow Queue PIE packet scheduler") Link: https://lore.kernel.org/lkml/00000000000017ad3f06040bf394@google.com/ Reported-by: syzbot+e46fbd5289363464bc13@syzkaller.appspotmail.com Signed-off-by:Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20230829123541.3745013-1-edumazet@google.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix mangling of TCP options with non-linear skbuff, from Xiao Liang. 2) OOB read in xt_sctp due to missing sanitization of array length field. From Wander Lairson Costa. 3) OOB read in xt_u32 due to missing sanitization of array length field. Also from Wander Lairson Costa. All of them above, always broken for several releases. 4) Missing audit log for set element reset command, from Phil Sutter. 5) Missing audit log for rule reset command, also from Phil. These audit log support are missing in 6.5. * tag 'nf-23-08-31' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: Audit log rule reset netfilter: nf_tables: Audit log setelem reset netfilter: xt_u32: validate user space input netfilter: xt_sctp: validate the flag_info count netfilter: nft_exthdr: Fix non-linear header modification ==================== Link: https://lore.kernel.org/r/20230830235935.465690-1-pablo@netfilter.orgSigned-off-by:
-
Donald Hunter authored
Add missing cross-reference label for classic_netlink. Fixes: 2db8abf0 ("doc/netlink: Document the netlink-raw schema extensions") Signed-off-by:
Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20230829085539.36354-1-donald.hunter@gmail.comSigned-off-by:
-
Oliver Neukum authored
It is backwards compatible Signed-off-by:
Oliver Neukum <oneukum@suse.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230829084717.961-1-oneukum@suse.comSigned-off-by:
-
Russell King (Oracle) authored
Alexander Stein reports that commit a014c355 ("net: stmmac: clarify difference between "interface" and "phy_interface"") caused breakage, because plat->mac_interface will never be negative. Fix this by using the "rc" temporary variable in stmmac_probe_config_dt(). Reported-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Tested-by:
-
- 30 Aug, 2023 12 commits
-
-
Phil Sutter authored
Resetting rules' stateful data happens outside of the transaction logic, so 'get' and 'dump' handlers have to emit audit log entries themselves. Fixes: 8daa8fde ("netfilter: nf_tables: Introduce NFT_MSG_GETRULE_RESET") Signed-off-by:
Phil Sutter <phil@nwl.cc> Reviewed-by:
Richard Guy Briggs <rgb@redhat.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Phil Sutter authored
Since set element reset is not integrated into nf_tables' transaction logic, an explicit log call is needed, similar to NFT_MSG_GETOBJ_RESET handling. For the sake of simplicity, catchall element reset will always generate a dedicated log entry. This relieves nf_tables_dump_set() from having to adjust the logged element count depending on whether a catchall element was found or not. Fixes: 079cd633 ("netfilter: nf_tables: Introduce NFT_MSG_GETSETELEM_RESET") Signed-off-by:
-
Wander Lairson Costa authored
The xt_u32 module doesn't validate the fields in the xt_u32 structure. An attacker may take advantage of this to trigger an OOB read by setting the size fields with a value beyond the arrays boundaries. Add a checkentry function to validate the structure. This was originally reported by the ZDI project (ZDI-CAN-18408). Fixes: 1b50b8a3 ("[NETFILTER]: Add u32 match") Cc: stable@vger.kernel.org Signed-off-by:
Wander Lairson Costa <wander@redhat.com> Signed-off-by:
-
Wander Lairson Costa authored
sctp_mt_check doesn't validate the flag_count field. An attacker can take advantage of that to trigger a OOB read and leak memory information. Add the field validation in the checkentry function. Fixes: 2e4e6a17 ("[NETFILTER] x_tables: Abstraction layer for {ip,ip6,arp}_tables") Cc: stable@vger.kernel.org Reported-by:
Lucas Leong <wmliang@infosec.exchange> Signed-off-by:
-
Xiao Liang authored
Fix skb_ensure_writable() size. Don't use nft_tcp_header_pointer() to make it explicit that pointers point to the packet (not local buffer). Fixes: 99d1712b ("netfilter: exthdr: tcp option set support") Fixes: 7890cbea ("netfilter: exthdr: add support for tcp option removal") Cc: stable@vger.kernel.org Signed-off-by:
Xiao Liang <shaw.leon@gmail.com> Signed-off-by:
-
David Vernet authored
There isn't really anything other than just "BPF" at this point, so referring to it as "eBPF" in our standards document just causes unnecessary confusion. Let's just be consistent and use "BPF". Suggested-by:
Will Hawkins <hawkinsw@obs.cr> Signed-off-by:
David Vernet <void@manifault.com> Signed-off-by:
-
David Vernet authored
As specified in the IETF BPF charter, the BPF working group has plans to add one or more informational documents that recommend conventions and guidelines for producing portable BPF program binaries. The instruction-set.rst document currently contains a "Registers and calling convention" subsection which dictates a calling convention that belongs in an ABI document, rather than an instruction set document. Let's move it to a new abi.rst document so we can clean it up. The abi.rst document will of course be significantly changed and expanded upon over time. For now, it's really just a placeholder which will contain ABI-specific language that doesn't belong in other documents. Signed-off-by:
-
David Vernet authored
In commit 4d496be9 ("bpf,docs: Create new standardization subdirectory"), I added a standardization/ directory to the BPF documentation, which will contain the docs that will be standardized as part of the effort with the IETF. I included linux-notes.rst in that directory, but I shouldn't have. It doesn't contain anything that will be standardized. Let's move it back to Documentation/bpf. Signed-off-by:
-
Heng Guo authored
commit edf391ff ("snmp: add missing counters for RFC 4293") had already added OutOctets for RFC 4293. In commit 2d8dbb04 ("snmp: fix OutOctets counter to include forwarded datagrams"), OutOctets was counted again, but not removed from ip_output(). According to RFC 4293 "3.2.3. IP Statistics Tables", ipipIfStatsOutTransmits is not equal to ipIfStatsOutForwDatagrams. So "IPSTATS_MIB_OUTOCTETS must be incremented when incrementing" is not accurate. And IPSTATS_MIB_OUTOCTETS should be counted after fragment. This patch reverts commit 2d8dbb04 ("snmp: fix OutOctets counter to include forwarded datagrams") and move IPSTATS_MIB_OUTOCTETS to ip_finish_output2 for ipv4. Reviewed-by:
Filip Pudak <filip.pudak@windriver.com> Signed-off-by:
Heng Guo <heng.guo@windriver.com> Signed-off-by:
-
John Fastabend authored
Sockmap and sockhash maps are a collection of psocks that are objects representing a socket plus a set of metadata needed to manage the BPF programs associated with the socket. These maps use the stab->lock to protect from concurrent operations on the maps, e.g. trying to insert to objects into the array at the same time in the same slot. Additionally, a sockhash map has a bucket lock to protect iteration and insert/delete into the hash entry. Each psock has a psock->link which is a linked list of all the maps that a psock is attached to. This allows a psock (socket) to be included in multiple sockmap and sockhash maps. This linked list is protected the psock->link_lock. They _must_ be nested correctly to avoid deadlock: lock(stab->lock) : do BPF map operations and psock insert/delete lock(psock->link_lock) : add map to psock linked list of maps unlock(psock->link_lock) unlock(stab->lock) For non PREEMPT_RT kernels both raw_spin_lock_t and spin_lock_t are guaranteed to not sleep. But, with PREEMPT_RT kernels the spin_lock_t variants may sleep. In the current code we have many patterns like this: rcu_critical_section: raw_spin_lock(stab->lock) spin_lock(psock->link_lock) <- may sleep ouch spin_unlock(psock->link_lock) raw_spin_unlock(stab->lock) rcu_critical_section Nesting spin_lock() inside a raw_spin_lock() violates locking rules for PREEMPT_RT kernels. And additionally we do alloc(GFP_ATOMICS) inside the stab->lock, but those might sleep on PREEMPT_RT kernels. The result is splats like this: ./test_progs -t sockmap_basic [ 33.344330] bpf_testmod: loading out-of-tree module taints kernel. [ 33.441933] [ 33.442089] ============================= [ 33.442421] [ BUG: Invalid wait context ] [ 33.442763] 6.5.0-rc5-01731-gec0ded2e #4958 Tainted: G O [ 33.443320] ----------------------------- [ 33.443624] test_progs/2073 is trying to lock: [ 33.443960] ffff888102a1c290 (&psock->link_lock){....}-{3:3}, at: sock_map_update_common+0x2c2/0x3d0 [ 33.444636] other info that might help us debug this: [ 33.444991] context-{5:5} [ 33.445183] 3 locks held by test_progs/2073: [ 33.445498] #0: ffff88811a208d30 (sk_lock-AF_INET){+.+.}-{0:0}, at: sock_map_update_elem_sys+0xff/0x330 [ 33.446159] #1: ffffffff842539e0 (rcu_read_lock){....}-{1:3}, at: sock_map_update_elem_sys+0xf5/0x330 [ 33.446809] #2: ffff88810d687240 (&stab->lock){+...}-{2:2}, at: sock_map_update_common+0x177/0x3d0 [ 33.447445] stack backtrace: [ 33.447655] CPU: 10 PID To fix observe we can't readily remove the allocations (for that we would need to use/create something similar to bpf_map_alloc). So convert raw_spin_lock_t to spin_lock_t. We note that sock_map_update that would trigger the allocate and potential sleep is only allowed through sys_bpf ops and via sock_ops which precludes hw interrupts and low level atomic sections in RT preempt kernel. On non RT preempt kernel there are no changes here and spin locks sections and alloc(GFP_ATOMIC) are still not sleepable. Signed-off-by:John Fastabend <john.fastabend@gmail.com> Signed-off-by:
-
Eduard Zingerman authored
Add a section on CO-RE relocations to llvm_relo.rst. Describe relevant .BTF.ext structure, `enum bpf_core_relo_kind` and `struct bpf_core_relo` in some detail. Description is based on doc-strings from: - include/uapi/linux/bpf.h:struct bpf_core_relo - tools/lib/bpf/relo_core.c:__bpf_core_types_match() Signed-off-by:
Eduard Zingerman <eddyz87@gmail.com> Signed-off-by:
Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/bpf/20230826222912.2560865-2-eddyz87@gmail.com
-
Will Hawkins authored
The offset to use when calculating the target of a program-local call is in the instruction's imm field, not its offset field. Signed-off-by:
-
