- 16 May, 2020 3 commits
-
-
Jonathan Bakker authored
The bma023, bma150, and smb380 are in the same family as the bma180 and support is being added to the bma180 IIO driver for them. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Jonathan Bakker <xc-racer2@live.ca> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Jonathan Bakker authored
The bma180 IIO driver is being extended for support for the chips support by input's bma150 driver (bma023, bma150, smb380). Don't allow both drivers to be enabled simultaneously as they're for the same hardware. Signed-off-by:
-
Jonathan Bakker authored
Some variants of the bma180 (eg bma023) have different reset values. In preparation for adding support for them, factor out the reset value into the chip specific data. Reviewed-by:
-
- 15 May, 2020 31 commits
-
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-5.8b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of new device support, cleanups and features for IIO in the 5.8 cycle Usual mixed back but with a few subsystem wide or device type wide cleanups. New device support * adis16475 - New driver supporting adis16470, adis16475, adis16477, adis16465, adis16467, adis16500, adis16505 and adis16507. Includes some rework of the adis library to simplify using it for this new driver. * ak8974 - Add support for Alps hscdt008a. ID only. Related patches add support for scale. * atlas-sensor - Add support for RTD-SM OEM temperature sensor. * cm32181 - Add support for CM3218 including support for SMBUS alert via ACPI resources. * ltc2632 - Add support for ltc2634-12/10/8 DACS including handling per device type numbers of channels. Major Features * cm32181 - ACPI bindings including parsing CPM0 and CPM1 custom ACPI tables. Includes minor tidy ups and fixes. * vcnl4000 - Add event support - Add buffered data capture support - Add control of sampling frequency Cleanups and minor fixes. * core - Trivial rework of iio_device_alloc to use an early return and improve readability. - Precursors to addition of multiple buffer support. So far minor refactoring. * subsystem wide - Use get_unaligned_be24 slightly improve readability over open coding it. * adis drivers - Use iio_get_debugfs_dentry access function. * bh1780, cm32181, cm3232, gp2ap02a00f, opt3001, st_uvis25, vl6180, dmard06, kxsd9 - Drop use of of_match_ptr to allow ACPI based probing via PRP0001. Part of clear out of this to avoid cut and paste into new drivers. * ad5592r, ad5593r - Fix typos * ad5933 - Use managed interfaces to automate error handling and remove. * ak8974 - Fix wrong number of 'real bits' for buffered data. - Refactor to pull measurement code out as separate function. bmp280 - Fix lack of clamp on range during data capture. * at91-sama5d2_adc - Handle unfinished conversions correctly. - Allow use of triggers other than it's own. - Reorganize buffer setup and tear down as part of long running subsystem wide rework. * ccs811 - Add DT binding docs and match table. - Support external reset and wakeup pins. * hid-sensors - Reorganize buffer setup and tear down as part of long running subsystem wide rework. * ltr501 - Constify some structs. * vcnl4000 - Fix an endian issue by using explicit byte swapped i2c accessors. * tag 'iio-for-5.8b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (74 commits) iio: light: ltr501: Constify structs staging: iio: ad5933: attach life-cycle of kfifo buffer to parent device and use managed calls throughout iio: bmp280: fix compensation of humidity iio: light: cm32181: Fix integartion time typo iio: light: cm32181: Add support for parsing CPM0 and CPM1 ACPI tables iio: light: cm32181: Make lux_per_bit and lux_per_bit_base_it runtime settings iio: light: cm32181: Use units of 1/100000th for calibscale and lux_per_bit iio: light: cm32181: Change reg_init to use a bitmap of which registers to init iio: light: cm32181: Handle CM3218 ACPI devices with 2 I2C resources iio: light: cm32181: Clean up the probe function a bit iio: light: cm32181: Add support for the CM3218 iio: light: cm32181: Add some extra register defines iio: light: cm32181: Add support for ACPI enumeration iio: light: cm32181: Switch to new style i2c-driver probe function iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger iio: vcnl4000: Add buffer support for VCNL4010/20. iio: vcnl4000: Add sampling frequency support for VCNL4010/20. iio: vcnl4000: Add event support for VCNL4010/20. iio: vcnl4000: Factorize data reading and writing. iio: vcnl4000: Fix i2c swapped word reading. ...
-
Jérôme Pouiller authored
When a station is removed, the driver check that all the Tx frames were correctly sent. However, the station can be removed before all the Tx frames were acknowledged and a false positive warning can be emitted. The previous commit has added a trace when driver received an acknowledge for a non-existent station. It appear that these events are perfectly correlated and there is no leak. Now, the subject is perfectly understood. Remove the warning. Just keep a debug trace in case we have any doubt in the future. In the past, the subject has already been discussed here: https://lore.kernel.org/driverdev-devel/6287924.ghGFUMk3OD@pc-42/ Fixes: 4bbc6a3e ("staging: wfx: make warning about pending frame less scary") Signed-off-by:
Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200515083325.378539-20-Jerome.Pouiller@silabs.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jérôme Pouiller authored
Some resources are associated to the outgoing of the stations. To avoid any resource leaks. It is important to understand why an acknowledge is not associated to any station. Add a trace for that purpose. Signed-off-by:
-
Jérôme Pouiller authored
The function wfx_tx_flush() wait for there is no more queued frames in hardware queue. Then, for the sanity, it checks that there is no more pending frame on any AC queue. However, there is a race here. It may happens that hardware queues are empty, but the counters of the AC queues are not yet updated. So, it may produce false-positive warning. The easiest way to solve the problem is just to remove the sanity check. Signed-off-by:
-
Jérôme Pouiller authored
If AP did not start, the error was not reported to mac80211. Signed-off-by:
-
Jérôme Pouiller authored
Currently, when mac80211 want to disable beacon filtering, the driver reset the filter table and disable the beacon filtering. Only the latter action is required. Signed-off-by:
-
Jérôme Pouiller authored
When multiple vif are in use (= one access point and one station), and when the channels are different, it is necessary to enable power save on station. The firmware check that steps are done in the correct order: - AP can't start if PS is not enable on the station - PS can't set on the station before the association has finished (= before the call set_bss_params) Obviously, in add, when one of the interface disappears, it is necessary to restore the power save status. wfx_update_pm() is able to set the correct PS configuration. But it has to be called at the right time: 1. before hif_start(), but after the channel configuration is known 2. after hif_set_bss_params() 3. after hif_reset() Therefore, the call to wfx_update_pm() from wfx_add_interface() is too early to address 1. The call after hif_set_bss_params() already exists. For the symmetry, the call from wfx_remove_interface() (that handle 3.) is also relocated. Signed-off-by: -
Jérôme Pouiller authored
The device disallows to start a scan request between hif_join() and hif_set_bss_params(). The driver is not protected against that. The worst case happens when association is aborted and hif_set_bss_params() never happens. mac80211 would never ask for scan during the association process. So, this patch just aborts the association in progress when scan is requested. Signed-off-by:
-
Jérôme Pouiller authored
wfx_stop_ap() and wfx_reset() do the same thing. Merge them. Signed-off-by:
-
Jérôme Pouiller authored
In fact, wfx_do_unjoin() resets the interface. This mechanism can be used in more cases than just disassociating from a BSS. So, rename it to reflect that fact. Signed-off-by:
-
Jérôme Pouiller authored
wfx_tx_policy_put() use data from the skb. However, the call to skb_pull() has just discarded them (even if the memory is in fact not really discarded). Signed-off-by:
-
Jérôme Pouiller authored
The function wfx_notify_buffered_tx() need to know if the frame was associated to a station. This information is available in the Control Buffer (CB) of the skb. However, when wfx_notify_buffered_tx() is called, the CB is no more available. Thus, the caller has to take care of this information. wfx_notify_buffered_tx() is a specific case. All the other function are called before the destruction of the CB. So, this patch align the API of wfx_notify_buffered_tx() with the other functions. Call it before the CB was destroyed and drop the extra argument 'has_sta'. It is also the right time to rename it into wfx_tx_update_sta() (which is closer to the behavior of the function). Signed-off-by:
-
Jérôme Pouiller authored
wfx_tx_confirm_cb() is a big function. A big part of its body aims to fill the rates list. So, create a new function wfx_tx_fill_rates() and make wfx_tx_confirm_cb() smaller. Signed-off-by:
-
Jérôme Pouiller authored
When wfx_flush() is called, the status of pending frames are reported to mac80211 with random status. mac80211 probably won't interpret this status in this case, but it is cleaner to return a correctly initialized status. Signed-off-by:
-
Jérôme Pouiller authored
Fix indention of wfx_skb_dtor(). Signed-off-by:
-
Jérôme Pouiller authored
Before to start the scan request, the firmware signals (with a null frame) to the AP it won't be able to receive data. This frame can be long to send: up to 512TU. The current calculus of the scan timeout does not take into account this delay. Signed-off-by:
-
Jérôme Pouiller authored
Until now, the driver did not always check if the allocations success. The issue was discussed here: https://lore.kernel.org/netdev/2026476.QLiXXEGFCf@pc-42/Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Jérôme Pouiller authored
Strings are allowed to exceed 80 columns but, in this case, the format arguments should be placed on a new line. Apply this rule to the whole code of the driver. Signed-off-by:
-
Jérôme Pouiller authored
The device does not answer to the command hif_shutdown. Therefore, hif_shutdown() is a bit special. It bypasses some of work normally made by wfx_cmd_send(). In particularly, it unlock hif_cmd.lock and hif_cmd.key_renew_lock. However, if the driver notice that the device is frozen, wfx_cmd_send() stops to send data and doesn't lock the mutexes. Then, it produced a warning when hif_shutdown() tried to unlock these mutexes. Signed-off-by:
-
Matej Dujava authored
This patch is removing definition of CFLAGS in Makefile of vt6656 and vt6655, as those are defining macros that are not used. This will remove undef of one macro from vt6655/device_main.c, as it is only undef and it is not used anywhere else, so it is safe to remove it. Macros are removed from vt665x/Makefile and vt6655/device_main.c. Signed-off-by:
Matej Dujava <mdujava@kocurkovo.cz> Link: https://lore.kernel.org/r/1589397351-24655-2-git-send-email-mdujava@kocurkovo.czSigned-off-by:
-
Oliver Graute authored
Set Gamma Values and Register Values for the HSD20_IPS Panel Signed-off-by:
Oliver Graute <oliver.graute@kococonnector.com> Link: https://lore.kernel.org/r/1589380299-21871-1-git-send-email-oliver.graute@gmail.comSigned-off-by:
-
Xiangyang Zhang authored
Fix checkpatch.pl check: CHECK: No space is necessary after a cast Signed-off-by:
Xiangyang Zhang <xyz.sun.ok@gmail.com> Link: https://lore.kernel.org/r/20200513130042.13185-1-xyz.sun.ok@gmail.comSigned-off-by:
-
John Oldman authored
Coding style issue reported by checkpatch.pl This patch clears the checkpatch.pl "Block comments should align the * on each line" warning. Also cleared /****** and blank line. Signed-off-by:
John Oldman <john.oldman@polehill.co.uk> Link: https://lore.kernel.org/r/20200513125405.28242-1-john.oldman@polehill.co.ukSigned-off-by:
-
Johan Hovold authored
Drop the driver version of the line-coding request and use the protocol definition directly as was originally intended instead. This specifically avoids having the two versions of what is supposed to be the same struct ever getting out of sync. Note that this has in fact already happened once when the protocol definition had its implicit padding removed while the driver struct wasn't updated. The fact that we used the size of the then larger driver struct when memcpying its content to the stack didn't exactly make things better. A later addition of a flow-control field incidentally made the structures match again. Signed-off-by:
Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20200514070548.4423-1-johan@kernel.orgSigned-off-by:
-
Christian Gromm authored
This patch fixes the ABI description file sysfs-bus-most. Signed-off-by:
Christian Gromm <christian.gromm@microchip.com> Link: https://lore.kernel.org/r/1589534465-7423-8-git-send-email-christian.gromm@microchip.comSigned-off-by:
-
Christian Gromm authored
This patch makes use of the macro ATTRIBUTE_GROUPS to create the groups instead of defining them manually. Signed-off-by:
-
Christian Gromm authored
This patch corrects the typo in the Kconfig file where it says tranceiver instead of transceiver. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/1589534465-7423-6-git-send-email-christian.gromm@microchip.comSigned-off-by:
-
Christian Gromm authored
This patch replaces the functions dev_notice with dev_dbg to silence the driver during normal operation. Signed-off-by:
-
Christian Gromm authored
This patch checks the number of endpoints reported by the USB interface descriptor and throws an error if the number exceeds MAX_NUM_ENDPOINTS. Signed-off-by:
-
Christian Gromm authored
This patch removes the reference to the driver API file for USB error codes. Signed-off-by:
-
Christian Gromm authored
This patch removes the pr_*() functions and uses dev_*() instead. Signed-off-by:
-
- 13 May, 2020 6 commits
-
-
Oscar Carter authored
In the start of the "vnt_rf_set_txpower" function the "power" variable is set at most to VNT_RF_MAX_POWER (hex = 0x3f, dec = 63). Then, in the switch statement there are four comparisons with the "power" variable against AL7230_PWR_IDX_LEN (dec = 64), VT3226_PWR_IDX_LEN (dec = 64), VT3342_PWR_IDX_LEN (dec = 64). Due to all the commented comparisons are to check if the "power" variable is "greater than or equal" to 64, this never happens. So, remove the logically dead code. Also, remove all the defines that are no longer required. Addresses-Coverity-ID: 1230228 ("Logically dead code") Fixes: f53d9f12 ("staging: vt6656: rf.c additional power.") Signed-off-by:Oscar Carter <oscar.carter@gmx.com> Link: https://lore.kernel.org/r/20200510090950.7633-1-oscar.carter@gmx.comSigned-off-by:
-
Houssem KADI authored
Missing empty line after variable declaration Signed-off-by:
Houssem KADI <kadi.houssem.eddine@gmail.com> Link: https://lore.kernel.org/r/20200509180849.GA30426@houssem-MS-7808Signed-off-by:
-
Malcolm Priestley authored
Now mac89211 is doing frame timing in rxtx these vendor adjustments need to be removed. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/034e445c-b245-52c4-c855-431b9783bcff@gmail.comSigned-off-by:
-
Malcolm Priestley authored
rsvtime is the time needed in firmware to process the received frame time in firmware so they can be the same as vnt_get_rts_duration or vnt_get_cts_duration where appropriate. The rts_rrv_time are now all the same timing in vnt_rxtx_rts. So vnt_get_rtscts_rsvtime_le and and vnt_get_frame_time are no longer required. Signed-off-by:
-
Malcolm Priestley authored
split vnt_get_rtscts_duration_le into vnt_get_rts_duration and vnt_get_cts_duration. The duration's are all the same in vnt_rxtx_rts_g_head. Signed-off-by:
-
Malcolm Priestley authored
use the mac80211 ieee80211_ctstoself_duration for CTS to self frames. Signed-off-by:
-
