- 09 Jan, 2023 27 commits
-
-
Sven Schnelle authored
There are lots of places adding attributes or orders to the datastream. Add a few helpers to make that code shorter and easier to read. Signed-off-by:
Sven Schnelle <svens@linux.ibm.com> Acked-by:
Heiko Carstens <hca@linux.ibm.com> Tested-by:
Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by:
-
Sven Schnelle authored
Instead of always converting the character set, only convert them when the line is really displayed. Signed-off-by:
-
Sven Schnelle authored
To make the upcoming patches easier to read, move tty3270_convert_line() before changing code. No functional change. Signed-off-by:
-
Sven Schnelle authored
All callers of raw3270_buffer_address() are calculating the offset from some x/y coordinates. Move that calculation inside of the function, so user can pass the x/y values directly. Note that negative values are relative to the end-of-line or end-of-screen. Signed-off-by:
-
Sven Schnelle authored
No functional change (except more memory consumption), in preparation for the line buffer rework. Signed-off-by:
-
Sven Schnelle authored
There a quite a few places using 'tp->view.rows - 2'. Add a helper function for this. This will also be used when a function key help line will be added. Signed-off-by:
-
Sven Schnelle authored
To make the code easier to read, split up tty3270_convertline() into several subfunctions: - tty3270_resize_line() to realloc the line if it doesn't have enough space left - tty3270_required_length() to calculate how much space we need - tty3270_add_attributes() to add the color and highlight attributes - tty3270_add_reset_attributes() to reset the attributes at the end of the line Signed-off-by:
-
Sven Schnelle authored
There's no easy way to figure out whether the user has re-connected to the z/VM session. When the user re-connected with a different geometry to z/VM, the screen layout is broken. Allow the user to force a resizing by pressing the Clear Key. Signed-off-by:
-
Sven Schnelle authored
This change was initially made to reduce code duplication when the con3270 and tty3270 shared the same resize code. It still makes sense to move the resize workqueue to raw3270 in case we add some other view later. Signed-off-by:
-
Sven Schnelle authored
There are a few places (and there would be more with the following commits) like this: raw3270_request_reset(cp->kreset); raw3270_request_set_cmd(cp->kreset, TC_WRITE); raw3270_request_add_data(cp->kreset, &kreset_data, 1); raw3270_start(&cp->view, cp->kreset); i.e reset a request, setting the command, adding payload, and starting the request. Add a helper raw3270_start_request() which takes a command and the payload as argument and calls the approppriate functions. Signed-off-by:
-
Sven Schnelle authored
Use AID_* instead of hex numbers to make the code a bit easier to read. also convert the if/else blocks to a switch statement in tty3270_read_tasklet(). Signed-off-by:
-
Sven Schnelle authored
With 'TERM=vt220' zsh is sending several NUL characters with the prompt to the tty. Both xterm and the linux drm console seem to ignore them. Ignore them in tty3270 as well. Signed-off-by:
-
Sven Schnelle authored
Add support for ESC(B and ESC(0 to switch between character charset and graphics charset. Used in vt100 and later terminal generations. Signed-off-by:
-
Sven Schnelle authored
Add support for ASCII S0/S1 to switch between character charset and graphic charset. Signed-off-by:
-
Sven Schnelle authored
3270 terminals support 8 background colors. Add the code to utilize them. Unfortunately the line erase code need to be adjusted: Without background colors, it was sufficient to just set the line length to zero. With background colors, we need to put spaces with the correct background color. Signed-off-by:
-
Sven Schnelle authored
In preparation of background color and graphic escape support add a structure for attributes can be copied at once. Signed-off-by:
-
Sven Schnelle authored
Signed-off-by:
-
Sven Schnelle authored
This makes the code easier to read. Signed-off-by:
-
Sven Schnelle authored
This makes the code easier to read. Signed-off-by:
-
Sven Schnelle authored
fix function prototypes split over two lines like: static void foobar(void) and fix superfluous spaces in declarations like foo * bar Signed-off-by:
-
Sven Schnelle authored
fix function prototypes split over two lines like: static void foobar(void) and fix superfluous spaces in declarations like foo * bar Signed-off-by:
-
Sven Schnelle authored
The current code uses diag210 to infer the 3270 geometry from the model number when running on z/VM. This doesn't work well as almost all 3270 software clients report as 3279-2 with a custom resolution. tty3270 assumes it has a 80x24 terminal connected because of the -2 suffix. Use diag 8c to fetch the realy geometry from z/VM. Note that this doesn't allow dynamic resizing, i.e. reconnecting to a z/VM session with a different geometry. Signed-off-by:
-
Sven Schnelle authored
Rename the driver file to con3270 to be in sync with con3215.c. This removes CONFIG_TN3270_TTY, it is now always build if CONFIG_TN3270 is enabled. Signed-off-by:
-
Sven Schnelle authored
There were two flavours of 3270 drivers: con3270, which provides a console driver, and tty3270 providing a tty driver. A user could switch with PF3 between the two views. While this sounds nice, it's a bit annoying: If the user enters a command which triggers a kernel message, he always has to switch back and forth to see the message. Unify both views to have kernel messages and tty in one screen, like it is on almost all other platforms. This also has the nice side effect of removing a lot of duplicate code. Signed-off-by:
-
Sven Schnelle authored
Will be used later for the console driver. Signed-off-by:
-
Nicholas Piggin authored
cputime_t was a core kernel type, removed by commits ed5c8c85..b672592f. As explained in commit b672592f ("sched/cputime: Remove generic asm headers"), the final cleanup is for the arch to provide cputime_to_nsec[s](). Commit e53051e7 ("s390/cputime: provide archicture specific cputime_to_nsecs") did that, but just didn't remove the then-unused cputime_to_usecs() and associated remnants. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Reviewed-by:
Alexander Gordeev <agordeev@linux.ibm.com> Link: https://lore.kernel.org/r/20221006105635.115775-1-npiggin@gmail.comSigned-off-by:
-
Thomas Richter authored
CPU Measurement counting facility events PROBLEM_STATE_CPU_CYCLES(32) and PROBLEM_STATE_INSTRUCTIONS(33) are valid events. However the device driver returns error -EOPNOTSUPP when these event are to be installed. Fix this and allow installation of events PROBLEM_STATE_CPU_CYCLES, PROBLEM_STATE_CPU_CYCLES:u, PROBLEM_STATE_INSTRUCTIONS and PROBLEM_STATE_INSTRUCTIONS:u. Kernel space counting only is still not supported by s390. Signed-off-by:
Thomas Richter <tmricht@linux.ibm.com> Acked-by:
Sumanth Korikkar <sumanthk@linux.ibm.com> Signed-off-by:
-
- 08 Jan, 2023 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Three fixes for various bogosity in our linker script, revealed by the recent commit which changed discard behaviour with some toolchains. * tag 'powerpc-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/vmlinux.lds: Don't discard .comment powerpc/vmlinux.lds: Don't discard .rela* for relocatable builds powerpc/vmlinux.lds: Define RUNTIME_DISCARD_EXIT
-
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblockLinus Torvalds authored
Pull memblock fixes from Mike Rapoport: "Small fixes in kernel-doc and tests: - Fix kernel-doc for memblock_phys_free() to use correct names for the counterpart allocation methods - Fix compilation error in memblock tests" * tag 'fixes-2023-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: memblock: Fix doc for memblock_phys_free memblock tests: Fix compilation error.
-
- 07 Jan, 2023 6 commits
-
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client fixes from Trond Myklebust: - Fix a race in the RPCSEC_GSS upcall code that causes hung RPC calls - Fix a broken coalescing test in the pNFS file layout driver - Ensure that the access cache rcu path also applies the login test - Fix up for a sparse warning * tag 'nfs-for-6.2-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Fix up a sparse warning NFS: Judge the file access cache's timestamp in rcu path pNFS/filelayout: Fix coalescing test for single DS SUNRPC: ensure the matching upcall is in-flight upon downcall
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "cifs/smb3 client fixes: - two multichannel fixes - three reconnect fixes - unmap fix" * tag '6.2-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix interface count calculation during refresh cifs: refcount only the selected iface during interface update cifs: protect access of TCP_Server_Info::{dstaddr,hostname} cifs: fix race in assemble_neg_contexts() cifs: ignore ipc reconnect failures during dfs failover cifs: Fix kmap_local_page() unmapping
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree fixes from Rob Herring: - Fix DT memory scanning for some MIPS boards when memory is not specified in DT - Redo CONFIG_CMDLINE* handling for missing /chosen node. The first attempt broke PS3 (and possibly other PPC platforms). - Fix constraints in QCom Soundwire schema * tag 'devicetree-fixes-for-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: fdt: Honor CONFIG_CMDLINE* even without /chosen node, take 2 Revert "of: fdt: Honor CONFIG_CMDLINE* even without /chosen node" dt-bindings: soundwire: qcom,soundwire: correct sizes related to number of ports of/fdt: run soc memory setup when early_init_dt_scan_memory fails
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some small USB driver fixes for 6.2-rc3 that resolve some reported issues. They include: - of-reported ulpi problem, so the offending commit is reverted - dwc3 driver bugfixes for recent changes - fotg210 fixes Most of these have been in linux-next for a while, the last few were on the mailing list for a long time and passed all the 0-day bot testing so all should be fine with them as well" * tag 'usb-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: dwc3: gadget: Ignore End Transfer delay on teardown usb: dwc3: xilinx: include linux/gpio/consumer.h usb: fotg210-udc: fix error return code in fotg210_udc_probe() usb: fotg210: fix OTG-only build Revert "usb: ulpi: defer ulpi_register on ulpi_read_id timeout"
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "Most noticeable is that Yishai found a big data corruption regression due to a change in the scatterlist: - Do not wrongly combine non-contiguous pages in scatterlist - Fix compilation warnings on gcc 13 - Oops when using some mlx5 stats - Bad enforcement of atomic responder resources in mlx5" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: lib/scatterlist: Fix to merge contiguous pages into the last SG properly RDMA/mlx5: Fix validation of max_rd_atomic caps for DC RDMA/mlx5: Fix mlx5_ib_get_hw_stats when used for device RDMA/srp: Move large values to a new enum for gcc13
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix single *.ko build - Fix module builds when vmlinux.o or Module.symver is missing * tag 'kbuild-fixes-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: readd -w option when vmlinux.o or Module.symver is missing kbuild: fix single *.ko build
-
- 06 Jan, 2023 4 commits
-
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Daniel Vetter: "Still not much, but more than last week. Dave should be back next week from the beaching. drivers: - i915-gvt fixes - amdgpu/kfd fixes - panfrost bo refcounting fix - meson afbc corruption fix - imx plane width fix core: - drm/sched fixes - drm/mm kunit test fix - dma-buf export error handling fixes" * tag 'drm-fixes-2023-01-06' of git://anongit.freedesktop.org/drm/drm: Revert "drm/amd/display: Enable Freesync Video Mode by default" drm/i915/gvt: fix double free bug in split_2MB_gtt_entry drm/i915/gvt: use atomic operations to change the vGPU status drm/i915/gvt: fix vgpu debugfs clean in remove drm/i915/gvt: fix gvt debugfs destroy drm/i915: unpin on error in intel_vgpu_shadow_mm_pin() drm/amd/display: Uninitialized variables causing 4k60 UCLK to stay at DPM1 and not DPM0 drm/amdkfd: Fix kernel warning during topology setup drm/scheduler: Fix lockup in drm_sched_entity_kill() drm/imx: ipuv3-plane: Fix overlay plane width drm/scheduler: Fix lockup in drm_sched_entity_kill() drm/virtio: Fix memory leak in virtio_gpu_object_create() drm/meson: Reduce the FIFO lines held when AFBC is not used drm/tests: reduce drm_mm_test stack usage drm/panfrost: Fix GEM handle creation ref-counting drm/plane-helper: Add the missing declaration of drm_atomic_state dma-buf: fix dma_buf_export init order v2
-
Jason A. Donenfeld authored
TPM 1 is sometimes broken across system suspends, due to races or locking issues or something else that haven't been diagnosed or fixed yet, most likely having to do with concurrent reads from the TPM's hardware random number generator driver. These issues prevent the system from actually suspending, with errors like: tpm tpm0: A TPM error (28) occurred continue selftest ... tpm tpm0: A TPM error (28) occurred attempting get random ... tpm tpm0: Error (28) sending savestate before suspend tpm_tis 00:08: PM: __pnp_bus_suspend(): tpm_pm_suspend+0x0/0x80 returns 28 tpm_tis 00:08: PM: dpm_run_callback(): pnp_bus_suspend+0x0/0x10 returns 28 tpm_tis 00:08: PM: failed to suspend: error 28 PM: Some devices failed to suspend, or early wake event detected This issue was partially fixed by 23393c64 ("char: tpm: Protect tpm_pm_suspend with locks"), in a last minute 6.1 commit that Linus took directly because the TPM maintainers weren't available. However, it seems like this just addresses the most common cases of the bug, rather than addressing it entirely. So there are more things to fix still, apparently. In lieu of actually fixing the underlying bug, just allow system suspend to continue, so that laptops still go to sleep fine. Later, this can be reverted when the real bug is fixed. Link: https://lore.kernel.org/lkml/7cbe96cf-e0b5-ba63-d1b4-f63d2e826efa@suse.cz/ Cc: stable@vger.kernel.org # 6.1+ Reported-by:
Vlastimil Babka <vbabka@suse.cz> Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Acked-by:
Luigi Semenzato <semenzato@chromium.org> Cc: Peter Huewe <peterhuewe@gmx.de> Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Johannes Altmanninger <aclopte@gmail.com> Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Linus Torvalds authored
Commit 55d1cbbb ("hfs/hfsplus: use WARN_ON for sanity check") fixed a build warning by turning a comment into a WARN_ON(), but it turns out that syzbot then complains because it can trigger said warning with a corrupted hfs image. The warning actually does warn about a bad situation, but we are much better off just handling it as the error it is. So rather than warn about us doing bad things, stop doing the bad things and return -EIO. While at it, also fix a memory leak that was introduced by an earlier fix for a similar syzbot warning situation, and add a check for one case that historically wasn't handled at all (ie neither comment nor subsequent WARN_ON). Reported-by: syzbot+7bb7cd3595533513a9e7@syzkaller.appspotmail.com Fixes: 55d1cbbb ("hfs/hfsplus: use WARN_ON for sanity check") Fixes: 8d824e69 ("hfs: fix OOB Read in __hfs_brec_find") Link: https://lore.kernel.org/lkml/000000000000dbce4e05f170f289@google.com/Tested-by:
Michael Schmitz <schmitzmic@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Viacheslav Dubeyko <slava@dubeyko.com> Signed-off-by:
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull block fixes from Jens Axboe: "The big change here is obviously the revert of the pktcdvd driver removal. Outside of that, just minor tweaks. In detail: - Re-instate the pktcdvd driver, which necessitates adding back bio_copy_data_iter() and the fops->devnode() hook for now (me) - Fix for splitting of a bio marked as NOWAIT, causing either nowait reads or writes to error with EAGAIN even if parts of the IO completed (me) - Fix for ublk, punting management commands to io-wq as they can all easily block for extended periods of time (Ming) - Removal of SRCU dependency for the block layer (Paul)" * tag 'block-2023-01-06' of git://git.kernel.dk/linux: block: Remove "select SRCU" Revert "pktcdvd: remove driver." Revert "block: remove devnode callback from struct block_device_operations" Revert "block: bio_copy_data_iter" ublk: honor IO_URING_F_NONBLOCK for handling control command block: don't allow splitting of a REQ_NOWAIT bio block: handle bio_split_to_limits() NULL return
-
