- 31 May, 2019 40 commits
-
-
Dan Carpenter authored
[ Upstream commit b4c35c17 ] The "rate_index" is only used as an index into the phist_data->rx_rate[] array in the mwifiex_hist_data_set() function. That array has MWIFIEX_MAX_AC_RX_RATES (74) elements and it's used to generate some debugfs information. The "rate_index" variable comes from the network skb->data[] and it is a u8 so it's in the 0-255 range. We need to cap it to prevent an array overflow. Fixes: cbf6e055 ("mwifiex: add rx histogram statistics support") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Xiaoli Feng authored
[ Upstream commit ce96e888 ] dedupe_file_range operations is combiled into remap_file_range. But in nfs42_remap_file_range, it's skiped for dedupe operations. Before this patch: # dd if=/dev/zero of=nfs/file bs=1M count=1 # xfs_io -c "dedupe nfs/file 4k 64k 4k" nfs/file XFS_IOC_FILE_EXTENT_SAME: Invalid argument After this patch: # dd if=/dev/zero of=nfs/file bs=1M count=1 # xfs_io -c "dedupe nfs/file 4k 64k 4k" nfs/file deduped 4096/4096 bytes at offset 65536 4 KiB, 1 ops; 0.0046 sec (865.988 KiB/sec and 216.4971 ops/sec) Signed-off-by:
Xiaoli Feng <fengxiaoli0714@gmail.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Daniel Baluta authored
[ Upstream commit ddb35114 ] is_slave_mode defaults to false because sai structure that contains it is kzalloc'ed. Anyhow, if we decide to set the following configuration SAI slave -> SAI master, is_slave_mode will remain set on true although SAI being master it should be set to false. Fix this by updating is_slave_mode for each call of fsl_sai_set_dai_fmt. Signed-off-by:
Daniel Baluta <daniel.baluta@nxp.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Linus Walleij authored
[ Upstream commit 78927aa4 ] I went to great lengths to hand over the management of the GPIO descriptors to the regulator core, and some stray rebased oneliner in the old patch must have been assuming the devices were still doing devres management of it. We handed the management over to the regulator core, so of course the regulator core shall issue gpiod_put() when done. Sorry for the descriptor leak. Fixes: 541d052d ("regulator: core: Only support passing enable GPIO descriptors") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 06d5d6b7 ] In case platform_device_alloc fails, the fix returns an error code to avoid the NULL pointer dereference. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Daniel T. Lee authored
[ Upstream commit 32e621e5 ] Currently, building bpf samples will cause the following error. ./tools/lib/bpf/bpf.h:132:27: error: 'UINT32_MAX' undeclared here (not in a function) .. #define BPF_LOG_BUF_SIZE (UINT32_MAX >> 8) /* verifier maximum in kernels <= 5.1 */ ^ ./samples/bpf/bpf_load.h:31:25: note: in expansion of macro 'BPF_LOG_BUF_SIZE' extern char bpf_log_buf[BPF_LOG_BUF_SIZE]; ^~~~~~~~~~~~~~~~ Due to commit 4519efa6 ("libbpf: fix BPF_LOG_BUF_SIZE off-by-one error") hard-coded size of BPF_LOG_BUF_SIZE has been replaced with UINT32_MAX which is defined in <stdint.h> header. Even with this change, bpf selftests are running fine since these are built with clang and it includes header(-idirafter) from clang/6.0.0/include. (it has <stdint.h>) clang -I. -I./include/uapi -I../../../include/uapi -idirafter /usr/local/include -idirafter /usr/include \ -idirafter /usr/lib/llvm-6.0/lib/clang/6.0.0/include -idirafter /usr/include/x86_64-linux-gnu \ -Wno-compare-distinct-pointer-types -O2 -target bpf -emit-llvm -c progs/test_sysctl_prog.c -o - | \ llc -march=bpf -mcpu=generic -filetype=obj -o /linux/tools/testing/selftests/bpf/test_sysctl_prog.o But bpf samples are compiled with GCC, and it only searches and includes headers declared at the target file. As '#include <stdint.h>' hasn't been declared in tools/lib/bpf/bpf.h, it causes build failure of bpf samples. gcc -Wp,-MD,./samples/bpf/.sockex3_user.o.d -Wall -Wmissing-prototypes -Wstrict-prototypes \ -O2 -fomit-frame-pointer -std=gnu89 -I./usr/include -I./tools/lib/ -I./tools/testing/selftests/bpf/ \ -I./tools/ lib/ -I./tools/include -I./tools/perf -c -o ./samples/bpf/sockex3_user.o ./samples/bpf/sockex3_user.c; This commit add declaration of '#include <stdint.h>' to tools/lib/bpf/bpf.h to fix this problem. Signed-off-by:
Daniel T. Lee <danieltimlee@gmail.com> Acked-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit 43068cb7 ] Currently, the Kbuild core manipulates header search paths in a crazy way [1]. To fix this mess, I want all Makefiles to add explicit $(srctree)/ to the search paths in the srctree. Some Makefiles are already written in that way, but not all. The goal of this work is to make the notation consistent, and finally get rid of the gross hacks. Having whitespaces after -I does not matter since commit 48f6e3cf ("kbuild: do not drop -I without parameter"). [1]: https://patchwork.kernel.org/patch/9632347/Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Acked-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1553859161-2628-1-git-send-email-yamada.masahiro@socionext.comSigned-off-by:
-
Sergey Matyukevich authored
[ Upstream commit 5dc8cdce ] FullMAC STAs have no way to update bss channel after CSA channel switch completion. As a result, user-space tools may provide inconsistent channel info. For instance, consider the following two commands: $ sudo iw dev wlan0 link $ sudo iw dev wlan0 info The latter command gets channel info from the hardware, so most probably its output will be correct. However the former command gets channel info from scan cache, so its output will contain outdated channel info. In fact, current bss channel info will not be updated until the next [re-]connect. Note that mac80211 STAs have a workaround for this, but it requires access to internal cfg80211 data, see ieee80211_chswitch_work: /* XXX: shouldn't really modify cfg80211-owned data! */ ifmgd->associated->channel = sdata->csa_chandef.chan; This patch suggests to convert mac80211 workaround into cfg80211 behavior and to update current bss channel in cfg80211_ch_switch_notify. Signed-off-by:
Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Sugar Zhang authored
[ Upstream commit 2da254cc ] This patch kill instructs the DMAC to immediately terminate execution of a thread. and then clear the interrupt status, at last, stop generating interrupts for DMA_SEV. to guarantee the next dma start is clean. otherwise, one interrupt maybe leave to next start and make some mistake. we can reporduce the problem as follows: DMASEV: modify the event-interrupt resource, and if the INTEN sets function as interrupt, the DMAC will set irq<event_num> HIGH to generate interrupt. write INTCLR to clear interrupt. DMA EXECUTING INSTRUCTS DMA TERMINATE | | | | ... _stop | | | spin_lock_irqsave DMASEV | | | | mask INTEN | | | DMAKILL | | | spin_unlock_irqrestore in above case, a interrupt was left, and if we unmask INTEN, the DMAC will set irq<event_num> HIGH to generate interrupt. to fix this, do as follows: DMA EXECUTING INSTRUCTS DMA TERMINATE | | | | ... _stop | | | spin_lock_irqsave DMASEV | | | | DMAKILL | | | clear INTCLR | mask INTEN | | | spin_unlock_irqrestore Signed-off-by:
Sugar Zhang <sugar.zhang@rock-chips.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Huazhong Tan authored
[ Upstream commit 30780a8b ] Since irq handler and mailbox task will both update arq's count, so arq's count should use atomic_t instead of u32, otherwise its value may go wrong finally. Fixes: 07a0556a ("net: hns3: Changes to support ARQ(Asynchronous Receive Queue)") Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Will Deacon authored
[ Upstream commit 84ff7a09 ] Rather embarrassingly, our futex() FUTEX_WAKE_OP implementation doesn't explicitly set the return value on the non-faulting path and instead leaves it holding the result of the underlying atomic operation. This means that any FUTEX_WAKE_OP atomic operation which computes a non-zero value will be reported as having failed. Regrettably, I wrote the buggy code back in 2011 and it was upstreamed as part of the initial arm64 support in 2012. The reasons we appear to get away with this are: 1. FUTEX_WAKE_OP is rarely used and therefore doesn't appear to get exercised by futex() test applications 2. If the result of the atomic operation is zero, the system call behaves correctly 3. Prior to version 2.25, the only operation used by GLIBC set the futex to zero, and therefore worked as expected. From 2.25 onwards, FUTEX_WAKE_OP is not used by GLIBC at all. Fix the implementation by ensuring that the return value is either 0 to indicate that the atomic operation completed successfully, or -EFAULT if we encountered a fault when accessing the user mapping. Cc: <stable@kernel.org> Fixes: 6170a974 ("arm64: Atomic operations") Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 46b83629 ] clang produces a harmless warning for each use for the qeth_adp_supported macro: drivers/s390/net/qeth_l2_main.c:559:31: warning: implicit conversion from enumeration type 'enum qeth_ipa_setadp_cmd' to different enumeration type 'enum qeth_ipa_funcs' [-Wenum-conversion] if (qeth_adp_supported(card, IPA_SETADP_SET_PROMISC_MODE)) ~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/s390/net/qeth_core.h:179:41: note: expanded from macro 'qeth_adp_supported' qeth_is_ipa_supported(&c->options.adp, f) ~~~~~~~~~~~~~~~~~~~~~ ^ Add a version of this macro that uses the correct types, and remove the unused qeth_adp_enabled() macro that has the same problem. Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Heiner Kallweit authored
[ Upstream commit 8c90b795 ] PHY's behave differently when being reset. Some reset registers to defaults, some don't. Some trigger an autoneg restart, some don't. So let's also set the autoneg restart bit when resetting. Then PHY behavior should be more consistent. Clearing BMCR_ISOLATE serves the same purpose and is borrowed from genphy_restart_aneg. BMCR holds the speed / duplex settings in fixed mode. Therefore we may have an issue if a soft reset resets BMCR to its default. So better call genphy_setup_forced() afterwards in fixed mode. We've seen no related complaint in the last >10 yrs, so let's treat it as an improvement. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Yunsheng Lin authored
[ Upstream commit 63380a1a ] hns3_desc_unused() returns how many BD have been cleaned, but new buffer has not been attached to them. The register of HNS3_RING_RX_RING_FBDNUM_REG returns how many BD need allocating new buffer to or need to cleaned. So the remaining BD need to be clean is HNS3_RING_RX_RING_FBDNUM_REG - hns3_desc_unused(). Also, new buffer can not attach to the pending BD when the last BD is not handled, because memcpy has not been done on the first pending BD. This patch fixes by subtracting the pending BD num from unused_count after 'HNS3_RING_RX_RING_FBDNUM_REG - unused_count' is used to calculate the BD bum need to be clean. Fixes: e5597095 ("net: hns3: Add handling of GRO Pkts not fully RX'ed in NAPI poll") Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
-
Huazhong Tan authored
[ Upstream commit fba2efda ] When configure pause, current implementation returns directly after setup PFC without setup BP, which is not sufficient. So this patch fixes it, only return while setting PFC failed. Fixes: 44e59e37 ("net: hns3: do not return GE PFC setting err when initializing") Signed-off-by:
-
Mariusz Bialonczyk authored
[ Upstream commit 62909da8 ] >From the DS2408 datasheet [1]: "Resume Command function checks the status of the RC flag and, if it is set, directly transfers control to the control functions, similar to a Skip ROM command. The only way to set the RC flag is through successfully executing the Match ROM, Search ROM, Conditional Search ROM, or Overdrive-Match ROM command" The function currently works perfectly fine in a multidrop bus, but when we have only a single slave connected, then only a Skip ROM is used and Match ROM is not called at all. This is leading to problems e.g. with single one DS2408 connected, as the Resume Command is not working properly and the device is responding with failing results after the Resume Command. This commit is fixing this by using a Skip ROM instead in those cases. The bandwidth / performance advantage is exactly the same. Refs: [1] https://datasheets.maximintegrated.com/en/ds/DS2408.pdfSigned-off-by:
Mariusz Bialonczyk <manio@skyboo.net> Reviewed-by:
Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by:
-
Grygorii Strashko authored
[ Upstream commit 06095f34 ] Now CPSW ALE will set/clean Host port bit in Unregistered Multicast Flood Mask (UNREG_MCAST_FLOOD_MASK) for every VLAN without checking if this port belongs to VLAN or not when ALLMULTI mode flag is set for nedev. This is working in non dual_mac mode, but in dual_mac - it causes enabling/disabling ALLMULTI flag for both ports. Hence fix it by adding additional parameter to cpsw_ale_set_allmulti() to specify ALE port number for which ALLMULTI has to be enabled and check if port belongs to VLAN before modifying UNREG_MCAST_FLOOD_MASK. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Nicholas Piggin authored
[ Upstream commit 9b019acb ] The NOHZ idle balancer runs on the lowest idle CPU. This can interfere with isolated CPUs, so confine it to HK_FLAG_MISC housekeeping CPUs. HK_FLAG_SCHED is not used for this because it is not set anywhere at the moment. This could be folded into HK_FLAG_SCHED once that option is fixed. The problem was observed with increased jitter on an application running on CPU0, caused by NOHZ idle load balancing being run on CPU1 (an SMT sibling). Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190412042613.28930-1-npiggin@gmail.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Bard liao authored
[ Upstream commit 4d95c517 ] snd_hda_codec_device_new() is used by both legacy HDA and ASoC driver. However, we will call snd_hdac_device_unregister() in snd_hdac_ext_bus_device_remove() for ASoC device. This patch uses the type flag in hdac_device struct to determine is it a ASoC device or legacy HDA device and call snd_hdac_device_unregister() in snd_hda_codec_dev_free() only if it is a legacy HDA device. Signed-off-by:
Bard liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Philipp Rudo authored
[ Upstream commit 729829d7 ] To register data for the next kernel (command line, oldmem_base, etc.) the current kernel needs to find the ELF segment that contains head.S. This is currently done by checking ifor 'phdr->p_paddr == 0'. This works fine for the current kernel build but in theory the first few pages could be skipped. Make the detection more robust by checking if the entry point lies within the segment. Signed-off-by:
Philipp Rudo <prudo@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Manish Rangankar authored
[ Upstream commit f848bfd8 ] Sometimes during connection recovery when there is a failure to resolve ARP, and offload connection was not issued, driver tries to flush pending offload connection work which was not queued up. kernel: WARNING: CPU: 19 PID: 10110 at kernel/workqueue.c:3030 __flush_work.isra.34+0x19c/0x1b0 kernel: CPU: 19 PID: 10110 Comm: iscsid Tainted: G W 5.1.0-rc4 #11 kernel: Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 2.9.1 12/04/2018 kernel: RIP: 0010:__flush_work.isra.34+0x19c/0x1b0 kernel: Code: 8b fb 66 0f 1f 44 00 00 31 c0 eb ab 48 89 ef c6 07 00 0f 1f 40 00 fb 66 0f 1f 44 00 00 31 c0 eb 96 e8 08 16 fe ff 0f 0b eb 8d <0f> 0b 31 c0 eb 87 0f 1f 40 00 66 2e 0f 1 f 84 00 00 00 00 00 0f 1f kernel: RSP: 0018:ffffa6b4054dba68 EFLAGS: 00010246 kernel: RAX: 0000000000000000 RBX: ffff91df21c36fc0 RCX: 0000000000000000 kernel: RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff91df21c36fc0 kernel: RBP: ffff91df21c36ef0 R08: 0000000000000000 R09: 0000000000000000 kernel: R10: 0000000000000038 R11: ffffa6b4054dbd60 R12: ffffffffc05e72c0 kernel: R13: ffff91db10280820 R14: 0000000000000048 R15: 0000000000000000 kernel: FS: 00007f5d83cc1740(0000) GS:ffff91df2f840000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000001cc5000 CR3: 0000000465450002 CR4: 00000000001606e0 kernel: Call Trace: kernel: ? try_to_del_timer_sync+0x4d/0x80 kernel: qedi_ep_disconnect+0x3b/0x410 [qedi] kernel: ? 0xffffffffc083c000 kernel: ? klist_iter_exit+0x14/0x20 kernel: ? class_find_device+0x93/0xf0 kernel: iscsi_if_ep_disconnect.isra.18+0x58/0x70 [scsi_transport_iscsi] kernel: iscsi_if_recv_msg+0x10e2/0x1510 [scsi_transport_iscsi] kernel: ? copyout+0x22/0x30 kernel: ? _copy_to_iter+0xa0/0x430 kernel: ? _cond_resched+0x15/0x30 kernel: ? __kmalloc_node_track_caller+0x1f9/0x270 kernel: iscsi_if_rx+0xa5/0x1e0 [scsi_transport_iscsi] kernel: netlink_unicast+0x17f/0x230 kernel: netlink_sendmsg+0x2d2/0x3d0 kernel: sock_sendmsg+0x36/0x50 kernel: ___sys_sendmsg+0x280/0x2a0 kernel: ? timerqueue_add+0x54/0x80 kernel: ? enqueue_hrtimer+0x38/0x90 kernel: ? hrtimer_start_range_ns+0x19f/0x2c0 kernel: __sys_sendmsg+0x58/0xa0 kernel: do_syscall_64+0x5b/0x180 kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by:
Manish Rangankar <mrangankar@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Fabien Dessenne authored
[ Upstream commit cf612c59 ] Manage the -EPROBE_DEFER error case for the wake IRQ. Signed-off-by:
Fabien Dessenne <fabien.dessenne@st.com> Acked-by:
Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Sven Van Asbroeck authored
[ Upstream commit f22b1ba1 ] The device's remove() attempts to shut down the delayed_work scheduled on the kernel-global workqueue by calling flush_scheduled_work(). Unfortunately, flush_scheduled_work() does not prevent the delayed_work from re-scheduling itself. The delayed_work might run after the device has been removed, and touch the already de-allocated info structure. This is a potential use-after-free. Fix by calling cancel_delayed_work_sync() during remove(): this ensures that the delayed work is properly cancelled, is no longer running, and is not able to re-schedule itself. This issue was detected with the help of Coccinelle. Signed-off-by:
Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by:
-
Johannes Berg authored
[ Upstream commit 30f24eab ] If for some reason the device gives us an RX interrupt before we're ready for it, perhaps during device power-on with misconfigured IRQ causes mapping or so, we can crash trying to access the queues. Prevent that by checking that we actually have RXQs and that they were properly allocated. Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Qu Wenruo authored
[ Upstream commit 7ac1e464 ] When we failed to find a root key in btrfs_update_root(), we just panic. That's definitely not cool, fix it by outputting an unique error message, aborting current transaction and return -EUCLEAN. This should not normally happen as the root has been used by the callers in some way. Reviewed-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Josef Bacik authored
[ Upstream commit ff612ba7 ] We've been seeing the following sporadically throughout our fleet panic: kernel BUG at fs/btrfs/relocation.c:4584! netversion: 5.0-0 Backtrace: #0 [ffffc90003adb880] machine_kexec at ffffffff81041da8 #1 [ffffc90003adb8c8] __crash_kexec at ffffffff8110396c #2 [ffffc90003adb988] crash_kexec at ffffffff811048ad #3 [ffffc90003adb9a0] oops_end at ffffffff8101c19a #4 [ffffc90003adb9c0] do_trap at ffffffff81019114 #5 [ffffc90003adba00] do_error_trap at ffffffff810195d0 #6 [ffffc90003adbab0] invalid_op at ffffffff81a00a9b [exception RIP: btrfs_reloc_cow_block+692] RIP: ffffffff8143b614 RSP: ffffc90003adbb68 RFLAGS: 00010246 RAX: fffffffffffffff7 RBX: ffff8806b9c32000 RCX: ffff8806aad00690 RDX: ffff880850b295e0 RSI: ffff8806b9c32000 RDI: ffff88084f205bd0 RBP: ffff880849415000 R8: ffffc90003adbbe0 R9: ffff88085ac90000 R10: ffff8805f7369140 R11: 0000000000000000 R12: ffff880850b295e0 R13: ffff88084f205bd0 R14: 0000000000000000 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffc90003adbbb0] __btrfs_cow_block at ffffffff813bf1cd #8 [ffffc90003adbc28] btrfs_cow_block at ffffffff813bf4b3 #9 [ffffc90003adbc78] btrfs_search_slot at ffffffff813c2e6c The way relocation moves data extents is by creating a reloc inode and preallocating extents in this inode and then copying the data into these preallocated extents. Once we've done this for all of our extents, we'll write out these dirty pages, which marks the extent written, and goes into btrfs_reloc_cow_block(). From here we get our current reloc_control, which _should_ match the reloc_control for the current block group we're relocating. However if we get an ENOSPC in this path at some point we'll bail out, never initiating writeback on this inode. Not a huge deal, unless we happen to be doing relocation on a different block group, and this block group is now rc->stage == UPDATE_DATA_PTRS. This trips the BUG_ON() in btrfs_reloc_cow_block(), because we expect to be done modifying the data inode. We are in fact done modifying the metadata for the data inode we're currently using, but not the one from the failed block group, and thus we BUG_ON(). (This happens when writeback finishes for extents from the previous group, when we are at btrfs_finish_ordered_io() which updates the data reloc tree (inode item, drops/adds extent items, etc).) Fix this by writing out the reloc data inode always, and then breaking out of the loop after that point to keep from tripping this BUG_ON() later. Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
-
Robbie Ko authored
[ Upstream commit 39ad3173 ] When doing fallocate, we first add the range to the reserve_list and then reserve the quota. If quota reservation fails, we'll release all reserved parts of reserve_list. However, cur_offset is not updated to indicate that this range is already been inserted into the list. Therefore, the same range is freed twice. Once at list_for_each_entry loop, and once at the end of the function. This will result in WARN_ON on bytes_may_use when we free the remaining space. At the end, under the 'out' label we have a call to: btrfs_free_reserved_data_space(inode, data_reserved, alloc_start, alloc_end - cur_offset); The start offset, third argument, should be cur_offset. Everything from alloc_start to cur_offset was freed by the list_for_each_entry_safe_loop. Fixes: 18513091 ("btrfs: update btrfs_space_info's bytes_may_use timely") Reviewed-by:
Robbie Ko <robbieko@synology.com> Signed-off-by:
-
Nadav Amit authored
[ Upstream commit f2c65fb3 ] When modules and BPF filters are loaded, there is a time window in which some memory is both writable and executable. An attacker that has already found another vulnerability (e.g., a dangling pointer) might be able to exploit this behavior to overwrite kernel code. Prevent having writable executable PTEs in this stage. In addition, avoiding having W+X mappings can also slightly simplify the patching of modules code on initialization (e.g., by alternatives and static-key), as would be done in the next patch. This was actually the main motivation for this patch. To avoid having W+X mappings, set them initially as RW (NX) and after they are set as RO set them as X as well. Setting them as executable is done as a separate step to avoid one core in which the old PTE is cached (hence writable), and another which sees the updated PTE (executable), which would break the W^X protection. Suggested-by:
Thomas Gleixner <tglx@linutronix.de> Suggested-by:
Andy Lutomirski <luto@amacapital.net> Signed-off-by:
Nadav Amit <namit@vmware.com> Signed-off-by:
Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit 300ec741 ] Since fc_remote_port_delete() must be called with interrupts enabled, do not disable interrupts when calling that function. Remove the lockin calls from around the put_sess() call. This is safe because the function that is called when the final reference is dropped, qlt_unreg_sess(), grabs the proper locks. This patch avoids that lockdep reports the following: WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected kworker/2:1/62 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: 0000000009e679b3 (&(&k->k_lock)->rlock){+.+.}, at: klist_next+0x43/0x1d0 and this task is already holding: 00000000a033b71c (&(&ha->tgt.sess_lock)->rlock){-...}, at: qla24xx_delete_sess_fn+0x55/0xf0 [qla2xxx_scst] which would create a new lock dependency: (&(&ha->tgt.sess_lock)->rlock){-...} -> (&(&k->k_lock)->rlock){+.+.} but this new dependency connects a HARDIRQ-irq-safe lock: (&(&ha->tgt.sess_lock)->rlock){-...} ... which became HARDIRQ-irq-safe at: lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 qla24xx_report_id_acquisition+0xa69/0xe30 [qla2xxx_scst] qla24xx_process_response_queue+0x69e/0x1270 [qla2xxx_scst] qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx_scst] __handle_irq_event_percpu+0x79/0x3c0 handle_irq_event_percpu+0x70/0xf0 handle_irq_event+0x5a/0x8b handle_edge_irq+0x12c/0x310 handle_irq+0x192/0x20a do_IRQ+0x73/0x160 ret_from_intr+0x0/0x1d default_idle+0x23/0x1f0 arch_cpu_idle+0x15/0x20 default_idle_call+0x35/0x40 do_idle+0x2bb/0x2e0 cpu_startup_entry+0x1d/0x20 start_secondary+0x2a8/0x320 secondary_startup_64+0xa4/0xb0 to a HARDIRQ-irq-unsafe lock: (&(&k->k_lock)->rlock){+.+.} ... which became HARDIRQ-irq-unsafe at: ... lock_acquire+0xe3/0x200 _raw_spin_lock+0x32/0x50 klist_add_tail+0x33/0xb0 device_add+0x7e1/0xb50 device_create_groups_vargs+0x11c/0x150 device_create_with_groups+0x89/0xb0 vtconsole_class_init+0xb2/0x124 do_one_initcall+0xc5/0x3ce kernel_init_freeable+0x295/0x32e kernel_init+0x11/0x11b ret_from_fork+0x3a/0x50 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&k->k_lock)->rlock); local_irq_disable(); lock(&(&ha->tgt.sess_lock)->rlock); lock(&(&k->k_lock)->rlock); <Interrupt> lock(&(&ha->tgt.sess_lock)->rlock); *** DEADLOCK *** 3 locks held by kworker/2:1/62: #0: 00000000a4319c16 ((wq_completion)"qla2xxx_wq"){+.+.}, at: process_one_work+0x437/0xa80 #1: 00000000ffa34c42 ((work_completion)(&sess->del_work)){+.+.}, at: process_one_work+0x437/0xa80 #2: 00000000a033b71c (&(&ha->tgt.sess_lock)->rlock){-...}, at: qla24xx_delete_sess_fn+0x55/0xf0 [qla2xxx_scst] the dependencies between HARDIRQ-irq-safe lock and the holding lock: -> (&(&ha->tgt.sess_lock)->rlock){-...} ops: 8 { IN-HARDIRQ-W at: lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 qla24xx_report_id_acquisition+0xa69/0xe30 [qla2xxx_scst] qla24xx_process_response_queue+0x69e/0x1270 [qla2xxx_scst] qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx_scst] __handle_irq_event_percpu+0x79/0x3c0 handle_irq_event_percpu+0x70/0xf0 handle_irq_event+0x5a/0x8b handle_edge_irq+0x12c/0x310 handle_irq+0x192/0x20a do_IRQ+0x73/0x160 ret_from_intr+0x0/0x1d default_idle+0x23/0x1f0 arch_cpu_idle+0x15/0x20 default_idle_call+0x35/0x40 do_idle+0x2bb/0x2e0 cpu_startup_entry+0x1d/0x20 start_secondary+0x2a8/0x320 secondary_startup_64+0xa4/0xb0 INITIAL USE at: lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 qla24xx_report_id_acquisition+0xa69/0xe30 [qla2xxx_scst] qla24xx_process_response_queue+0x69e/0x1270 [qla2xxx_scst] qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx_scst] __handle_irq_event_percpu+0x79/0x3c0 handle_irq_event_percpu+0x70/0xf0 handle_irq_event+0x5a/0x8b handle_edge_irq+0x12c/0x310 handle_irq+0x192/0x20a do_IRQ+0x73/0x160 ret_from_intr+0x0/0x1d default_idle+0x23/0x1f0 arch_cpu_idle+0x15/0x20 default_idle_call+0x35/0x40 do_idle+0x2bb/0x2e0 cpu_startup_entry+0x1d/0x20 start_secondary+0x2a8/0x320 secondary_startup_64+0xa4/0xb0 } ... key at: [<ffffffffa0c0d080>] __key.85462+0x0/0xfffffffffff7df80 [qla2xxx_scst] ... acquired at: lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 klist_next+0x43/0x1d0 device_for_each_child+0x96/0x110 scsi_target_block+0x3c/0x40 [scsi_mod] fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc] qla2x00_mark_device_lost+0xa0b/0xa30 [qla2xxx_scst] qlt_unreg_sess+0x1c6/0x380 [qla2xxx_scst] qla24xx_delete_sess_fn+0xe6/0xf0 [qla2xxx_scst] process_one_work+0x511/0xa80 worker_thread+0x67/0x5b0 kthread+0x1d2/0x1f0 ret_from_fork+0x3a/0x50 the dependencies between the lock to be acquired and HARDIRQ-irq-unsafe lock: -> (&(&k->k_lock)->rlock){+.+.} ops: 13831 { HARDIRQ-ON-W at: lock_acquire+0xe3/0x200 _raw_spin_lock+0x32/0x50 klist_add_tail+0x33/0xb0 device_add+0x7e1/0xb50 device_create_groups_vargs+0x11c/0x150 device_create_with_groups+0x89/0xb0 vtconsole_class_init+0xb2/0x124 do_one_initcall+0xc5/0x3ce kernel_init_freeable+0x295/0x32e kernel_init+0x11/0x11b ret_from_fork+0x3a/0x50 SOFTIRQ-ON-W at: lock_acquire+0xe3/0x200 _raw_spin_lock+0x32/0x50 klist_add_tail+0x33/0xb0 device_add+0x7e1/0xb50 device_create_groups_vargs+0x11c/0x150 device_create_with_groups+0x89/0xb0 vtconsole_class_init+0xb2/0x124 do_one_initcall+0xc5/0x3ce kernel_init_freeable+0x295/0x32e kernel_init+0x11/0x11b ret_from_fork+0x3a/0x50 INITIAL USE at: lock_acquire+0xe3/0x200 _raw_spin_lock+0x32/0x50 klist_add_tail+0x33/0xb0 device_add+0x7e1/0xb50 device_create_groups_vargs+0x11c/0x150 device_create_with_groups+0x89/0xb0 vtconsole_class_init+0xb2/0x124 do_one_initcall+0xc5/0x3ce kernel_init_freeable+0x295/0x32e kernel_init+0x11/0x11b ret_from_fork+0x3a/0x50 } ... key at: [<ffffffff83ed8780>] __key.15491+0x0/0x40 ... acquired at: lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 klist_next+0x43/0x1d0 device_for_each_child+0x96/0x110 scsi_target_block+0x3c/0x40 [scsi_mod] fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc] qla2x00_mark_device_lost+0xa0b/0xa30 [qla2xxx_scst] qlt_unreg_sess+0x1c6/0x380 [qla2xxx_scst] qla24xx_delete_sess_fn+0xe6/0xf0 [qla2xxx_scst] process_one_work+0x511/0xa80 worker_thread+0x67/0x5b0 kthread+0x1d2/0x1f0 ret_from_fork+0x3a/0x50 stack backtrace: CPU: 2 PID: 62 Comm: kworker/2:1 Tainted: G O 5.0.7-dbg+ #8 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: qla2xxx_wq qla24xx_delete_sess_fn [qla2xxx_scst] Call Trace: dump_stack+0x86/0xca check_usage.cold.52+0x473/0x563 __lock_acquire+0x11c0/0x23e0 lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 klist_next+0x43/0x1d0 device_for_each_child+0x96/0x110 scsi_target_block+0x3c/0x40 [scsi_mod] fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc] qla2x00_mark_device_lost+0xa0b/0xa30 [qla2xxx_scst] qlt_unreg_sess+0x1c6/0x380 [qla2xxx_scst] qla24xx_delete_sess_fn+0xe6/0xf0 [qla2xxx_scst] process_one_work+0x511/0xa80 worker_thread+0x67/0x5b0 kthread+0x1d2/0x1f0 ret_from_fork+0x3a/0x50 Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Acked-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit d4023db7 ] This patch avoids that lockdep reports the following warning: ===================================================== WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected 5.1.0-rc1-dbg+ #11 Tainted: G W ----------------------------------------------------- rmdir/1478 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: 00000000e7ac4607 (&(&k->k_lock)->rlock){+.+.}, at: klist_next+0x43/0x1d0 and this task is already holding: 00000000cf0baf5e (&(&ha->tgt.sess_lock)->rlock){-...}, at: tcm_qla2xxx_close_session+0x57/0xb0 [tcm_qla2xxx] which would create a new lock dependency: (&(&ha->tgt.sess_lock)->rlock){-...} -> (&(&k->k_lock)->rlock){+.+.} but this new dependency connects a HARDIRQ-irq-safe lock: (&(&ha->tgt.sess_lock)->rlock){-...} ... which became HARDIRQ-irq-safe at: lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 qla2x00_fcport_event_handler+0x1f3d/0x22b0 [qla2xxx] qla2x00_async_login_sp_done+0x1dc/0x1f0 [qla2xxx] qla24xx_process_response_queue+0xa37/0x10e0 [qla2xxx] qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx] __handle_irq_event_percpu+0x79/0x3c0 handle_irq_event_percpu+0x70/0xf0 handle_irq_event+0x5a/0x8b handle_edge_irq+0x12c/0x310 handle_irq+0x192/0x20a do_IRQ+0x73/0x160 ret_from_intr+0x0/0x1d default_idle+0x23/0x1f0 arch_cpu_idle+0x15/0x20 default_idle_call+0x35/0x40 do_idle+0x2bb/0x2e0 cpu_startup_entry+0x1d/0x20 start_secondary+0x24d/0x2d0 secondary_startup_64+0xa4/0xb0 to a HARDIRQ-irq-unsafe lock: (&(&k->k_lock)->rlock){+.+.} ... which became HARDIRQ-irq-unsafe at: ... lock_acquire+0xe3/0x200 _raw_spin_lock+0x32/0x50 klist_add_tail+0x33/0xb0 device_add+0x7f4/0xb60 device_create_groups_vargs+0x11c/0x150 device_create_with_groups+0x89/0xb0 vtconsole_class_init+0xb2/0x124 do_one_initcall+0xc5/0x3ce kernel_init_freeable+0x295/0x32e kernel_init+0x11/0x11b ret_from_fork+0x3a/0x50 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&k->k_lock)->rlock); local_irq_disable(); lock(&(&ha->tgt.sess_lock)->rlock); lock(&(&k->k_lock)->rlock); <Interrupt> lock(&(&ha->tgt.sess_lock)->rlock); *** DEADLOCK *** 4 locks held by rmdir/1478: #0: 000000002c7f1ba4 (sb_writers#10){.+.+}, at: mnt_want_write+0x32/0x70 #1: 00000000c85eb147 (&default_group_class[depth - 1]#2/1){+.+.}, at: do_rmdir+0x217/0x2d0 #2: 000000002b164d6f (&sb->s_type->i_mutex_key#13){++++}, at: vfs_rmdir+0x7e/0x1d0 #3: 00000000cf0baf5e (&(&ha->tgt.sess_lock)->rlock){-...}, at: tcm_qla2xxx_close_session+0x57/0xb0 [tcm_qla2xxx] the dependencies between HARDIRQ-irq-safe lock and the holding lock: -> (&(&ha->tgt.sess_lock)->rlock){-...} ops: 127 { IN-HARDIRQ-W at: lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 qla2x00_fcport_event_handler+0x1f3d/0x22b0 [qla2xxx] qla2x00_async_login_sp_done+0x1dc/0x1f0 [qla2xxx] qla24xx_process_response_queue+0xa37/0x10e0 [qla2xxx] qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx] __handle_irq_event_percpu+0x79/0x3c0 handle_irq_event_percpu+0x70/0xf0 handle_irq_event+0x5a/0x8b handle_edge_irq+0x12c/0x310 handle_irq+0x192/0x20a do_IRQ+0x73/0x160 ret_from_intr+0x0/0x1d default_idle+0x23/0x1f0 arch_cpu_idle+0x15/0x20 default_idle_call+0x35/0x40 do_idle+0x2bb/0x2e0 cpu_startup_entry+0x1d/0x20 start_secondary+0x24d/0x2d0 secondary_startup_64+0xa4/0xb0 INITIAL USE at: lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 qla2x00_loop_resync+0xb3d/0x2690 [qla2xxx] qla2x00_do_dpc+0xcee/0xf30 [qla2xxx] kthread+0x1d2/0x1f0 ret_from_fork+0x3a/0x50 } ... key at: [<ffffffffa125f700>] __key.62804+0x0/0xfffffffffff7e900 [qla2xxx] ... acquired at: __lock_acquire+0x11ed/0x1b60 lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 klist_next+0x43/0x1d0 device_for_each_child+0x96/0x110 scsi_target_block+0x3c/0x40 [scsi_mod] fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc] qla2x00_mark_device_lost+0x4d3/0x500 [qla2xxx] qlt_unreg_sess+0x104/0x2c0 [qla2xxx] tcm_qla2xxx_close_session+0xa2/0xb0 [tcm_qla2xxx] target_shutdown_sessions+0x17b/0x190 [target_core_mod] core_tpg_del_initiator_node_acl+0xf3/0x1f0 [target_core_mod] target_fabric_nacl_base_release+0x25/0x30 [target_core_mod] config_item_release+0x9f/0x120 [configfs] config_item_put+0x29/0x2b [configfs] configfs_rmdir+0x3d2/0x520 [configfs] vfs_rmdir+0xb3/0x1d0 do_rmdir+0x25c/0x2d0 __x64_sys_rmdir+0x24/0x30 do_syscall_64+0x77/0x220 entry_SYSCALL_64_after_hwframe+0x49/0xbe the dependencies between the lock to be acquired and HARDIRQ-irq-unsafe lock: -> (&(&k->k_lock)->rlock){+.+.} ops: 14568 { HARDIRQ-ON-W at: lock_acquire+0xe3/0x200 _raw_spin_lock+0x32/0x50 klist_add_tail+0x33/0xb0 device_add+0x7f4/0xb60 device_create_groups_vargs+0x11c/0x150 device_create_with_groups+0x89/0xb0 vtconsole_class_init+0xb2/0x124 do_one_initcall+0xc5/0x3ce kernel_init_freeable+0x295/0x32e kernel_init+0x11/0x11b ret_from_fork+0x3a/0x50 SOFTIRQ-ON-W at: lock_acquire+0xe3/0x200 _raw_spin_lock+0x32/0x50 klist_add_tail+0x33/0xb0 device_add+0x7f4/0xb60 device_create_groups_vargs+0x11c/0x150 device_create_with_groups+0x89/0xb0 vtconsole_class_init+0xb2/0x124 do_one_initcall+0xc5/0x3ce kernel_init_freeable+0x295/0x32e kernel_init+0x11/0x11b ret_from_fork+0x3a/0x50 INITIAL USE at: lock_acquire+0xe3/0x200 _raw_spin_lock+0x32/0x50 klist_add_tail+0x33/0xb0 device_add+0x7f4/0xb60 device_create_groups_vargs+0x11c/0x150 device_create_with_groups+0x89/0xb0 vtconsole_class_init+0xb2/0x124 do_one_initcall+0xc5/0x3ce kernel_init_freeable+0x295/0x32e kernel_init+0x11/0x11b ret_from_fork+0x3a/0x50 } ... key at: [<ffffffff83f3d900>] __key.15805+0x0/0x40 ... acquired at: __lock_acquire+0x11ed/0x1b60 lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 klist_next+0x43/0x1d0 device_for_each_child+0x96/0x110 scsi_target_block+0x3c/0x40 [scsi_mod] fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc] qla2x00_mark_device_lost+0x4d3/0x500 [qla2xxx] qlt_unreg_sess+0x104/0x2c0 [qla2xxx] tcm_qla2xxx_close_session+0xa2/0xb0 [tcm_qla2xxx] target_shutdown_sessions+0x17b/0x190 [target_core_mod] core_tpg_del_initiator_node_acl+0xf3/0x1f0 [target_core_mod] target_fabric_nacl_base_release+0x25/0x30 [target_core_mod] config_item_release+0x9f/0x120 [configfs] config_item_put+0x29/0x2b [configfs] configfs_rmdir+0x3d2/0x520 [configfs] vfs_rmdir+0xb3/0x1d0 do_rmdir+0x25c/0x2d0 __x64_sys_rmdir+0x24/0x30 do_syscall_64+0x77/0x220 entry_SYSCALL_64_after_hwframe+0x49/0xbe stack backtrace: CPU: 7 PID: 1478 Comm: rmdir Tainted: G W 5.1.0-rc1-dbg+ #11 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x86/0xca check_usage.cold.59+0x473/0x563 check_prev_add.constprop.43+0x1f1/0x1170 __lock_acquire+0x11ed/0x1b60 lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 klist_next+0x43/0x1d0 device_for_each_child+0x96/0x110 scsi_target_block+0x3c/0x40 [scsi_mod] fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc] qla2x00_mark_device_lost+0x4d3/0x500 [qla2xxx] qlt_unreg_sess+0x104/0x2c0 [qla2xxx] tcm_qla2xxx_close_session+0xa2/0xb0 [tcm_qla2xxx] target_shutdown_sessions+0x17b/0x190 [target_core_mod] core_tpg_del_initiator_node_acl+0xf3/0x1f0 [target_core_mod] target_fabric_nacl_base_release+0x25/0x30 [target_core_mod] config_item_release+0x9f/0x120 [configfs] config_item_put+0x29/0x2b [configfs] configfs_rmdir+0x3d2/0x520 [configfs] vfs_rmdir+0xb3/0x1d0 do_rmdir+0x25c/0x2d0 __x64_sys_rmdir+0x24/0x30 do_syscall_64+0x77/0x220 entry_SYSCALL_64_after_hwframe+0x49/0xbe Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit e209783d ] Implementations of the .write_pending() callback functions must guarantee that an appropriate LIO core callback function will be called immediately or at a later time. Make sure that this guarantee is met for aborted SCSI commands. [mkp: typo] Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Fixes: 694833ee ("scsi: tcm_qla2xxx: Do not allow aborted cmd to advance.") # v4.13. Fixes: a07100e0 ("qla2xxx: Fix TMR ABORT interaction issue between qla2xxx and TCM") # v4.5. Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit 24afabdb ] Make sure that the allocated interrupts are freed if allocating memory for the msix_entries array fails. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
-
Viresh Kumar authored
[ Upstream commit 4ebe36c9 ] Currently the error return path from kobject_init_and_add() is not followed by a call to kobject_put() - which means we are leaking the kobject. Fix it by adding a call to kobject_put() in the error path of kobject_init_and_add(). Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by:
Tobin C. Harding <tobin@kernel.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Nicholas Piggin authored
[ Upstream commit 7ae3f6e1 ] Using a jiffies timer creates a dependency on the tick_do_timer_cpu incrementing jiffies. If that CPU has locked up and jiffies is not incrementing, the watchdog heartbeat timer for all CPUs stops and creates false positives and confusing warnings on local CPUs, and also causes the SMP detector to stop, so the root cause is never detected. Fix this by using hrtimer based timers for the watchdog heartbeat, like the generic kernel hardlockup detector. Cc: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Reported-by:
Ravikumar Bangoria <ravi.bangoria@in.ibm.com> Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reported-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Nadav Amit authored
[ Upstream commit 3c0dab44 ] Since alloc_module() will not set the pages as executable soon, set ftrace trampoline pages as executable after they are allocated. For the time being, do not change ftrace to use the text_poke() interface. As a result, ftrace still breaks W^X. Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: <akpm@linux-foundation.org> Cc: <ard.biesheuvel@linaro.org> Cc: <deneen.t.dock@intel.com> Cc: <kernel-hardening@lists.openwall.com> Cc: <kristen@linux.intel.com> Cc: <linux_dti@icloud.com> Cc: <will.deacon@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190426001143.4983-10-namit@vmware.comSigned-off-by:
-
Lorenzo Bianconi authored
[ Upstream commit 89a37842 ] Remove mt76_queue dependency from tx_queue_skb function pointer and rely on mt76_tx_qid instead. This is a preliminary patch to introduce mt76_sw_queue support Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
-
Qian Cai authored
[ Upstream commit 74dd022f ] When building with -Wunused-but-set-variable, the compiler shouts about a number of pte_unmap() users, since this expands to an empty macro on arm64: | mm/gup.c: In function 'gup_pte_range': | mm/gup.c:1727:16: warning: variable 'ptem' set but not used | [-Wunused-but-set-variable] | mm/gup.c: At top level: | mm/memory.c: In function 'copy_pte_range': | mm/memory.c:821:24: warning: variable 'orig_dst_pte' set but not used | [-Wunused-but-set-variable] | mm/memory.c:821:9: warning: variable 'orig_src_pte' set but not used | [-Wunused-but-set-variable] | mm/swap_state.c: In function 'swap_ra_info': | mm/swap_state.c:641:15: warning: variable 'orig_pte' set but not used | [-Wunused-but-set-variable] | mm/madvise.c: In function 'madvise_free_pte_range': | mm/madvise.c:318:9: warning: variable 'orig_pte' set but not used | [-Wunused-but-set-variable] Rewrite pte_unmap() as a static inline function, which silences the warnings. Signed-off-by:
Qian Cai <cai@lca.pw> Signed-off-by:
-
Marc Zyngier authored
[ Upstream commit 1f5b62f0 ] The VDSO code uses the kernel helper that was originally designed to abstract the access between 32 and 64bit systems. It worked so far because this function is declared as 'inline'. As we're about to revamp that part of the code, the VDSO would break. Let's fix it by doing what should have been done from the start, a proper system register access. Reviewed-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Fabien Dessenne authored
[ Upstream commit b5b5a27b ] During probe, return the provided errors value instead of -ENODEV. This allows the driver to be deferred probed if needed. Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Jon Derrick authored
[ Upstream commit f10b83de ] If the BAR is zero size, it indicates it was never successfully mapped. Ensure that the BAR is valid during initialization before attempting to use it. Signed-off-by:
Jon Derrick <jonathan.derrick@intel.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
