- 11 Apr, 2023 25 commits
-
-
Shane Xiao authored
For SG BO to DMA-map userptrs on other GPUs, the SG BO need inherit MTYPEs in PTEs from original BO. If we set the flags, the device can be coherent with the CPUs and other GPUs. v2: 1. Drop unnecessary flags check 2. Remove local variable align Signed-off-by:
Shane Xiao <shane.xiao@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Guilherme G. Piccoli authored
The comment mentions that power1 cap attributes are not supported on Vangogh, but the opposite is indeed valid: for APUs, only Vangogh is supported. While at it, also fixed the Renoir comment below (thanks Melissa for noticing that!). Cc: Lijo Lazar <lijo.lazar@amd.com> Cc: Melissa Wen <mwen@igalia.com> Signed-off-by:
Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by:
-
Shane Xiao authored
For userptr bo with iommu on, multiple GPUs use same system memory dma mapping address when both adev and bo_adev are in identity mode or in the same iommu group. If RAM direct map to one GPU, other GPUs can share the original BO in order to reduce dma address array usage when RAM can direct map to these GPUs. However, we should explicit check whether RAM can direct map to all these GPUs. This patch fixes a potential issue that where RAM is direct mapped on some but not all GPUs. v2: 1. Update comment 2. Add helper function reuse_dmamap Signed-off-by:
-
Srinivasan Shanmugam authored
The driver doesn't resubmit jobs on hangs any more, hence drop the hang limit parameter - amdgpu_job_hang_limit, wherever it is used. Suggested-by:
Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Kent Russell <kent.russell@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
-
Igor Artemiev authored
The adev->dm.dc pointer can be NULL and dereferenced in amdgpu_dm_fini() without checking. Add a NULL pointer check before calling dc_dmub_srv_destroy(). Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 9a71c7d3 ("drm/amd/display: Register DMUB service with DC") Signed-off-by:
Igor Artemiev <Igor.A.Artemiev@mcst.ru> Signed-off-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Aric Cyr authored
This DC version brings along: - FW Release 0.0.161.0 - Improvements on FPO/FAMS - Correction to DML calculation - Fix to multiple clock related issues Acked-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Mario Limonciello authored
The array is hardcoded to 8 in atomfirmware.h, but firmware provides a bigger one sometimes. Deferencing the larger array causes an out of bounds error. commit 4fc1ba4a ("drm/amd/display: fix array index out of bound error in bios parser") fixed some of this, but there are two other cases not covered by it. Fix those as well. Reported-by: erhard_f@mailbox.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=214853 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2473Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Anthony Koo authored
- Add command to idle opt. - Rename d3 entry event and add idle trigger param on notify event. - Add bit to fw boot status to notify status when hardware is powered up. Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Tested-by:
-
Michael Strauss authored
[WHY] New sequence for transparent mode DP1.x link training was provided by LTTPR vendor [HOW] Implement new FIXED_VS sequence, increase LT retry count to minimize any potential intermittent lightup failures Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Michael Strauss <michael.strauss@amd.com> Tested-by:
-
Yifan Zha authored
[Why] As MES KIQ is dequeued, tell RLC that KIQ is inactive [How] Clear the RLC_CP_SCHEDULERS Active bit which RLC checks KIQ status In addition, driver can halt MES under SRIOV when unloading driver v2: Use scheduler0 mask to clear KIQ portion of RLC_CP_SCHEDULERS Signed-off-by:
Yifan Zha <Yifan.Zha@amd.com> Reviewed-by:
Horace Chen <horace.chen@amd.com> Signed-off-by:
-
Charlene Liu authored
[why] based on dscclk instance offset check conditiona program dscclk Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
Charlene Liu <Charlene.Liu@amd.com> Tested-by:
-
Alvin Lee authored
[Description] - On init if a display is connected, we need to maintain the DISPCLK frequency - Even though DPG_EN=1, the display still requires the correct timing or it could cause audio corruption (if DISPCLK freq is reduced) - Read the current DISPCLK freq and request the same value to ensure the timing is valid and unchanged - However, add option to do a full pipe power down (including link) which will also avoid audio related issues - Disabled for the time being on dcn32 Reviewed-by:
Alvin Lee <Alvin.Lee2@amd.com> Tested-by:
-
Alvin Lee authored
[Description] - When determining FPO support, include FPO + VActive support - Support FPO + VActive if one display meets regular requirements for FPO and the second display is able to switch in VACTIVE with a given amount of margin Reviewed-by:
-
Paul Hsieh authored
[Why] In 2560x1600@240p eDP panel, driver use lowest voltage level to play 1080p video cause underflow. According to HW SPEC, the senario should use high voltage level. [How] ChromaPre value is zero when bandwidth validation. Correct ChromaPre calculation. Reviewed-by:
Paul Hsieh <Paul.Hsieh@amd.com> Tested-by:
-
Hamza Mahfooz authored
To enable root clock optimizations, we need a number of register writes and need to account for the difference in DPSTREAMCLK between DCN31 and DCN314. To prevent issues, add a number of register writes to DCCG_MASK_SH_LIST_DCN314_COMMON(), and define dccg314_init() which is mostly in alignment with dccg31_init() but accounts for the new DPSTREAMCLK sequence. Reviewed-by:
-
Zhikai Zhai authored
[WHY] It will introduce the extra warnning log on some asic that doesn't register [HOW] Add the register on dcn32 Reviewed-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by:
Zhikai Zhai <zhikai.zhai@amd.com> Tested-by:
-
Alvin Lee authored
[Description] - If we find that applying FAMS doesn't reduce the voltage level, we will not use it - Ensure to clear the stream flags indicating FAMS if we hit this case Reviewed-by:
-
Yifan Zha authored
[Why] Need dequeue MES KIQ under SRIOV when unloading driver [How] Modify mes_v11_0_kiq_dequeue_sched which was used to dequeue MES SCHED to support veriable pipe. Add MES KIQ dequeue in hw fini Signed-off-by:
-
Tom Rix authored
clang with W=1 reports drivers/gpu/drm/amd/amdgpu/../display/modules/freesync/freesync.c:1132:15: error: variable 'average_render_time_in_us' set but not used [-Werror,-Wunused-but-set-variable] unsigned int average_render_time_in_us = 0; ^ This variable is not used so remove it, which caused i to be unused so remove that as well. Signed-off-by:Tom Rix <trix@redhat.com> Signed-off-by:
-
Arvind Yadav authored
Added some new parameters defined for the gfx usermode queues use cases in the v11_mqd_struct. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian Koenig <christian.koenig@amd.com> Reviewed-by:
Shashank Sharma <shashank.sharma@amd.com> Signed-off-by:
Arvind Yadav <Arvind.Yadav@amd.com> Signed-off-by:
-
Jack Xiao authored
To avoid new mes fw running with old driver, rename mes schq fw to gc_*_mes_2.bin. v2: add MODULE_FIRMWARE declaration v3: squash in fixup patch Signed-off-by:
Jack Xiao <Jack.Xiao@amd.com> Reviewed-by:
-
Tim Huang authored
Skip mode2 reset only for IMU enabled APUs when do S4. This patch is to fix the regression issue https://gitlab.freedesktop.org/drm/amd/-/issues/2483 It is generated by commit b5896266 ("drm/amdgpu: skip ASIC reset for APUs when go to S4"). Fixes: b5896266 ("drm/amdgpu: skip ASIC reset for APUs when go to S4") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2483Tested-by:
Yuan Perry <Perry.Yuan@amd.com> Signed-off-by:
Tim Huang <tim.huang@amd.com> Signed-off-by:
-
Daniel Vetter authored
Merge tag 'mediatek-drm-next-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next Mediatek DRM Next for Linux 6.4 1. Add support for 10-bit overlays 2. Add MediaTek SoC DRM (vdosys1) support for mt8195 3. Change mmsys compatible for mt8195 mediatek-drm 4. Only trigger DRM HPD events if bridge is attached 5. Change the aux retries times when receiving AUX_DEFER Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230410233005.2572-1-chunkuang.hu@kernel.org
-
https://gitlab.freedesktop.org/drm/msmDaniel Vetter authored
main pull request for v6.4 Core Display: ============ * Bugfixes for error handling during probe * rework UBWC decoder programming * prepare_commit cleanup * bindings for SM8550 (MDSS, DPU), SM8450 (DP) * timeout calculation fixup * atomic: use drm_crtc_next_vblank_start() instead of our own custom thing to calculate the start of next vblank DP: == * interrupts cleanup DPU: === * DSPP sub-block flush on sc7280 * support AR30 in addition to XR30 format * Allow using REC_0 and REC_1 to handle wide (4k) RGB planes * Split the HW catalog into individual per-SoC files DSI: === * rework DSI instance ID detection on obscure platforms GPU: === * uapi C++ compatibility fix * a6xx: More robust gdsc reset * a3xx and a4xx devfreq support * update generated headers * various cleanups and fixes * GPU and GEM updates to avoid allocations which could trigger reclaim (shrinker) in fence signaling path * dma-fence deadline hint support and wait-boost * a640 speedbin support * a650 speedbin support Conflicts in drivers/gpu/drm/msm/adreno/adreno_gpu.c: Conflict between the 7fa5047a ("drm: Use of_property_present() for testing DT property presence") and 9f251f93 ("drm/msm/adreno: Use OPP for every GPU generation"). The latter removed the of_ function call outright, so I went with what's in the PR unchanged. From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvwuj5tabyW910+N-B=5kFNAC7QNYoQ=0xi3roBjQvFFQ@mail.gmail.comSigned-off-by:
Daniel Vetter <daniel.vetter@intel.com>
-
Daniel Vetter authored
Merge tag 'drm-habanalabs-next-2023-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next This tag contains additional habanalabs driver changes for v6.4: - uAPI changes: - Add a definition of a new Gaudi2 server type. This is used by userspace to know what is the connectivity between the accelerators inside the server - New features and improvements: - speedup h/w queues test in Gaudi2 to reduce device initialization times. - Firmware related fixes: - Fixes to the handshake protocol during f/w initialization. - Sync f/w events interrupt in hard reset to avoid warning message. - Improvements to extraction of the firmware version. - Misc bug fixes and code cleanups. Notable fixes are: - Multiple fixes for interrupt handling in Gaudi2. - Unmap mapped memory in case TLB invalidation fails. Signed-off-by:
-
- 08 Apr, 2023 15 commits
-
-
Tomer Tayar authored
hl_sysfs_fini() is called only if hl_sysfs_init() completes successfully. Therefore if hl_sysfs_init() fails, need to remove any sysfs group that was added until that point. Signed-off-by:
Tomer Tayar <ttayar@habana.ai> Reviewed-by:
Oded Gabbay <ogabbay@kernel.org> Signed-off-by:
-
Moti Haimovski authored
HW queues testing at driver load and after reset takes a substantial amount of time. This commit reduces the queues test time in Gaudi2 devices by running all the tests in parallel instead of one after the other. Time measurements on tests duration shows that the new method is almost x100 faster than the serial approach. Signed-off-by:
Moti Haimovski <mhaimovski@habana.ai> Reviewed-by:
-
Dani Liberman authored
There is only single eq entry for arc farm sei event which aggregates events from the four arc farms. Fix the code to handle this event according to this behavior. Signed-off-by:
Dani Liberman <dliberman@habana.ai> Reviewed-by:
-
Ofir Bitton authored
Multi MSI interrupts aren't working in Gaudi1 and because of that, we are only using a single MSI interrupt. Therefore, let's remove this dead code in order to avoid confusion. Signed-off-by:
Ofir Bitton <obitton@habana.ai> Reviewed-by:
-
Oded Gabbay authored
Add definition of a new Gaudi2 server type. This represents the connectivity between the cards in that server type. Signed-off-by:
Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
-
Ofir Bitton authored
Removing redundant asic prop variable as we don't need to expose this to common code. In addition, fix some typos. Signed-off-by:
-
Koby Elbaz authored
Sending COMMS_GOTO_WFE instructs the FW's CPU to halt (WFE state). Once sent, FW's CPU isn't expected to continue communicating with LKD. Therefore, the stage of waiting for COMMS_STS_OK should be skipped or else waiting for COMMS_STS_OK will simply timeout, which will trigger unexpected behavior. Signed-off-by:
Koby Elbaz <kelbaz@habana.ai> Reviewed-by:
-
Tal Cohen authored
Receiving events from FW, while the device is in hard reset, causes a warning message in Driver log. The message may point to a problem in the Driver or FW. But It also can appear as a result of events that have been sent from FW just before the hard reset. In order to avoid receiving events from FW while the device is in reset and is already in 'disabled' mode, sync the f/w events interrupt right before setting the device to 'disabled'. Signed-off-by:
Tal Cohen <talcohen@habana.ai> Reviewed-by:
-
Ofir Bitton authored
During event handling, driver sets relevant reset and user event notifier flags. Fix few wrong flags settings. Signed-off-by:
-
Tomer Tayar authored
The decoder IRQ status register may have several set bits upon an abnormal interrupt. Therefore, when setting the events mask, need to check all bits and not using if-else. Signed-off-by:
-
Tomer Tayar authored
Decoder abnormal interrupts are for errors and not for completion, so rename the relevant work and work function to not include 'completion'. Signed-off-by:
-
Ofir Bitton authored
There are rare cases of failures when cards are initialized due to wrong values in efuse mappings that are parsed by firmware. To help debug those cases, print (in debug level) the raw binning masks as fetched from the firmware during device initialization. Signed-off-by:
-
Ofir Bitton authored
Current mapping between HMMU event and HMMU block is wrong. In addition the captured address in case of a page fault or an access error is scrambled, Hence we must call the descramble function. Signed-off-by:
-
Dafna Hirschfeld authored
1. Rename the func to hl_get_preboot_major_minor because we also set the extracted values in hdev fields. 2. Free the allocated string in the calling function which makes more sense Signed-off-by:
Dafna Hirschfeld <dhirschfeld@habana.ai> Reviewed-by:
-
Dani Liberman authored
The register which needs to be cleared is the valid register instead of the address. Signed-off-by:
-
