- 04 Jul, 2024 10 commits
-
-
Zijian Zhang authored
In selftests/net/msg_zerocopy.c, it has a while loop keeps calling sendmsg on a socket with MSG_ZEROCOPY flag, and it will recv the notifications until the socket is not writable. Typically, it will start the receiving process after around 30+ sendmsgs. However, as the introduction of commit dfa2f048 ("tcp: get rid of sysctl_tcp_adv_win_scale"), the sender is always writable and does not get any chance to run recv notifications. The selftest always exits with OUT_OF_MEMORY because the memory used by opt_skb exceeds the net.core.optmem_max. Meanwhile, it could be set to a different value to trigger OOM on older kernels too. Thus, we introduce "cfg_notification_limit" to force sender to receive notifications after some number of sendmsgs. Fixes: 07b65c5b ("test: add msg_zerocopy test") Signed-off-by:
Zijian Zhang <zijianzhang@bytedance.com> Signed-off-by:
Xiaochun Lu <xiaochun.lu@bytedance.com> Reviewed-by:
Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240701225349.3395580-2-zijianzhang@bytedance.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-06-25 (ice) This series contains updates to ice driver only. Milena adds disabling of extts events when PTP is disabled. Jake prevents possible NULL pointer by checking that timestamps are ready before processing extts events and adds checks for unsupported PTP pin configuration. Petr Oros replaces _test_bit() with the correct test_bit() macro. v1: https://lore.kernel.org/netdev/20240625170248.199162-1-anthony.l.nguyen@intel.com/ ==================== Link: https://patch.msgid.link/20240702171459.2606611-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Petr Oros authored
Do not use _test_bit() macro for testing bit. The proper macro for this is one without underline. _test_bit() is what test_bit() was prior to const-optimization. It directly calls arch_test_bit(), i.e. the arch-specific implementation (or the generic one). It's strictly _internal_ and shouldn't be used anywhere outside the actual test_bit() macro. test_bit() is a wrapper which checks whether the bitmap and the bit number are compile-time constants and if so, it calls the optimized function which evaluates this call to a compile-time constant as well. If either of them is not a compile-time constant, it just calls _test_bit(). test_bit() is the actual function to use anywhere in the kernel. IOW, calling _test_bit() avoids potential compile-time optimizations. The sensors is not a compile-time constant, thus most probably there are no object code changes before and after the patch. But anyway, we shouldn't call internal wrappers instead of the actual API. Fixes: 4da71a77 ("ice: read internal temperature sensor") Acked-by:
Ivan Vecera <ivecera@redhat.com> Reviewed-by:
Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by:
Petr Oros <poros@redhat.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240702171459.2606611-5-anthony.l.nguyen@intel.comSigned-off-by:
-
Jacob Keller authored
The driver receives requests for configuring pins via the .enable callback of the PTP clock object. These requests come into the driver with flags which modify the requested behavior from userspace. Current implementation in ice does not reject flags that it doesn't support. This causes the driver to incorrectly apply requests with such flags as PTP_PEROUT_DUTY_CYCLE, or any future flags added by the kernel which it is not yet aware of. Fix this by properly validating flags in both ice_ptp_cfg_perout and ice_ptp_cfg_extts. Ensure that we check by bit-wise negating supported flags rather than just checking and rejecting known un-supported flags. This is preferable, as it ensures better compatibility with future kernels. Fixes: 172db5f9 ("ice: add support for auxiliary input/output pins") Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
Karol Kolacinski <karol.kolacinski@intel.com> Reviewed-by:
Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by:
-
Jacob Keller authored
The ice_ptp_extts_event() function can race with ice_ptp_release() and result in a NULL pointer dereference which leads to a kernel panic. Panic occurs because the ice_ptp_extts_event() function calls ptp_clock_event() with a NULL pointer. The ice driver has already released the PTP clock by the time the interrupt for the next external timestamp event occurs. To fix this, modify the ice_ptp_extts_event() function to check the PTP state and bail early if PTP is not ready. Fixes: 172db5f9 ("ice: add support for auxiliary input/output pins") Reviewed-by:
-
Milena Olech authored
Extts events are disabled and enabled by the application ts2phc. However, in case where the driver is removed when the application is running, a specific extts event remains enabled and can cause a kernel crash. As a side effect, when the driver is reloaded and application is started again, remaining extts event for the channel from a previous run will keep firing and the message "extts on unexpected channel" might be printed to the user. To avoid that, extts events shall be disabled when PTP is released. Fixes: 172db5f9 ("ice: add support for auxiliary input/output pins") Reviewed-by:
Milena Olech <milena.olech@intel.com> Signed-off-by:
-
Kuniyuki Iwashima authored
syzkaller reported a KMSAN splat in __unix_walk_scc() while backtracking edge_stack after finalising SCC. Let's add a test case exercising the path. Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
Shigeru Yoshida <syoshida@redhat.com> Link: https://patch.msgid.link/20240702160428.10153-2-syoshida@redhat.comSigned-off-by:
-
Shigeru Yoshida authored
KMSAN reported uninit-value access in __unix_walk_scc() [1]. In the list_for_each_entry_reverse() loop, when the vertex's index equals it's scc_index, the loop uses the variable vertex as a temporary variable that points to a vertex in scc. And when the loop is finished, the variable vertex points to the list head, in this case scc, which is a local variable on the stack (more precisely, it's not even scc and might underflow the call stack of __unix_walk_scc(): container_of(&scc, struct unix_vertex, scc_entry)). However, the variable vertex is used under the label prev_vertex. So if the edge_stack is not empty and the function jumps to the prev_vertex label, the function will access invalid data on the stack. This causes the uninit-value access issue. Fix this by introducing a new temporary variable for the loop. [1] BUG: KMSAN: uninit-value in __unix_walk_scc net/unix/garbage.c:478 [inline] BUG: KMSAN: uninit-value in unix_walk_scc net/unix/garbage.c:526 [inline] BUG: KMSAN: uninit-value in __unix_gc+0x2589/0x3c20 net/unix/garbage.c:584 __unix_walk_scc net/unix/garbage.c:478 [inline] unix_walk_scc net/unix/garbage.c:526 [inline] __unix_gc+0x2589/0x3c20 net/unix/garbage.c:584 process_one_work kernel/workqueue.c:3231 [inline] process_scheduled_works+0xade/0x1bf0 kernel/workqueue.c:3312 worker_thread+0xeb6/0x15b0 kernel/workqueue.c:3393 kthread+0x3c4/0x530 kernel/kthread.c:389 ret_from_fork+0x6e/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Uninit was stored to memory at: unix_walk_scc net/unix/garbage.c:526 [inline] __unix_gc+0x2adf/0x3c20 net/unix/garbage.c:584 process_one_work kernel/workqueue.c:3231 [inline] process_scheduled_works+0xade/0x1bf0 kernel/workqueue.c:3312 worker_thread+0xeb6/0x15b0 kernel/workqueue.c:3393 kthread+0x3c4/0x530 kernel/kthread.c:389 ret_from_fork+0x6e/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Local variable entries created at: ref_tracker_free+0x48/0xf30 lib/ref_tracker.c:222 netdev_tracker_free include/linux/netdevice.h:4058 [inline] netdev_put include/linux/netdevice.h:4075 [inline] dev_put include/linux/netdevice.h:4101 [inline] update_gid_event_work_handler+0xaa/0x1b0 drivers/infiniband/core/roce_gid_mgmt.c:813 CPU: 1 PID: 12763 Comm: kworker/u8:31 Not tainted 6.10.0-rc4-00217-g35bb670d #32 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 Workqueue: events_unbound __unix_gc Fixes: 3484f063 ("af_unix: Detect Strongly Connected Components.") Reported-by:
syzkaller <syzkaller@googlegroups.com> Signed-off-by:
-
Sam Sun authored
In function bond_option_arp_ip_targets_set(), if newval->string is an empty string, newval->string+1 will point to the byte after the string, causing an out-of-bound read. BUG: KASAN: slab-out-of-bounds in strlen+0x7d/0xa0 lib/string.c:418 Read of size 1 at addr ffff8881119c4781 by task syz-executor665/8107 CPU: 1 PID: 8107 Comm: syz-executor665 Not tainted 6.7.0-rc7 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0xc1/0x5e0 mm/kasan/report.c:475 kasan_report+0xbe/0xf0 mm/kasan/report.c:588 strlen+0x7d/0xa0 lib/string.c:418 __fortify_strlen include/linux/fortify-string.h:210 [inline] in4_pton+0xa3/0x3f0 net/core/utils.c:130 bond_option_arp_ip_targets_set+0xc2/0x910 drivers/net/bonding/bond_options.c:1201 __bond_opt_set+0x2a4/0x1030 drivers/net/bonding/bond_options.c:767 __bond_opt_set_notify+0x48/0x150 drivers/net/bonding/bond_options.c:792 bond_opt_tryset_rtnl+0xda/0x160 drivers/net/bonding/bond_options.c:817 bonding_sysfs_store_option+0xa1/0x120 drivers/net/bonding/bond_sysfs.c:156 dev_attr_store+0x54/0x80 drivers/base/core.c:2366 sysfs_kf_write+0x114/0x170 fs/sysfs/file.c:136 kernfs_fop_write_iter+0x337/0x500 fs/kernfs/file.c:334 call_write_iter include/linux/fs.h:2020 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x96a/0xd80 fs/read_write.c:584 ksys_write+0x122/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b ---[ end trace ]--- Fix it by adding a check of string length before using it. Fixes: f9de11a1 ("bonding: add ip checks when store ip target") Signed-off-by:
Yue Sun <samsun1006219@gmail.com> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Reviewed-by:
Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20240702-bond-oob-v6-1-2dfdba195c19@kernel.orgSigned-off-by:
-
Radu Rendec authored
The use-after-free is actually in rswitch_tx_free(), which is inlined in rswitch_poll(). Since `skb` and `gq->skbs[gq->dirty]` are in fact the same pointer, the skb is first freed using dev_kfree_skb_any(), then the value in skb->len is used to update the interface statistics. Let's move around the instructions to use skb->len before the skb is freed. This bug is trivial to reproduce using KFENCE. It will trigger a splat every few packets. A simple ARP request or ICMP echo request is enough. Fixes: 271e015b ("net: rswitch: Add unmap_addrs instead of dma address in each desc") Signed-off-by:
Radu Rendec <rrendec@redhat.com> Reviewed-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://patch.msgid.link/20240702210838.2703228-1-rrendec@redhat.comSigned-off-by:
-
- 03 Jul, 2024 3 commits
-
-
Furong Xu authored
Commit 750011e2 ("net: stmmac: Add support for HW-accelerated VLAN stripping") enables MAC level VLAN tag stripping for all MAC cores, but leaves set_hw_vlan_mode() and rx_hw_vlan() un-implemented for both gmac and xgmac. On gmac and xgmac, ethtool reports rx-vlan-offload is on, both MAC and driver do nothing about VLAN packets actually, although VLAN works well. Driver level stripping should be used on gmac and xgmac for now. Fixes: 750011e2 ("net: stmmac: Add support for HW-accelerated VLAN stripping") Signed-off-by:
Furong Xu <0x1207@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dave Jiang authored
The following is emitted when using idxd (DSA) dmanegine as the data mover for ntb_transport that ntb_netdev uses. [74412.546922] BUG: using smp_processor_id() in preemptible [00000000] code: irq/52-idxd-por/14526 [74412.556784] caller is netif_rx_internal+0x42/0x130 [74412.562282] CPU: 6 PID: 14526 Comm: irq/52-idxd-por Not tainted 6.9.5 #5 [74412.569870] Hardware name: Intel Corporation ArcherCity/ArcherCity, BIOS EGSDCRB1.E9I.1752.P05.2402080856 02/08/2024 [74412.581699] Call Trace: [74412.584514] <TASK> [74412.586933] dump_stack_lvl+0x55/0x70 [74412.591129] check_preemption_disabled+0xc8/0xf0 [74412.596374] netif_rx_internal+0x42/0x130 [74412.600957] __netif_rx+0x20/0xd0 [74412.604743] ntb_netdev_rx_handler+0x66/0x150 [ntb_netdev] [74412.610985] ntb_complete_rxc+0xed/0x140 [ntb_transport] [74412.617010] ntb_rx_copy_callback+0x53/0x80 [ntb_transport] [74412.623332] idxd_dma_complete_txd+0xe3/0x160 [idxd] [74412.628963] idxd_wq_thread+0x1a6/0x2b0 [idxd] [74412.634046] irq_thread_fn+0x21/0x60 [74412.638134] ? irq_thread+0xa8/0x290 [74412.642218] irq_thread+0x1a0/0x290 [74412.646212] ? __pfx_irq_thread_fn+0x10/0x10 [74412.651071] ? __pfx_irq_thread_dtor+0x10/0x10 [74412.656117] ? __pfx_irq_thread+0x10/0x10 [74412.660686] kthread+0x100/0x130 [74412.664384] ? __pfx_kthread+0x10/0x10 [74412.668639] ret_from_fork+0x31/0x50 [74412.672716] ? __pfx_kthread+0x10/0x10 [74412.676978] ret_from_fork_asm+0x1a/0x30 [74412.681457] </TASK> The cause is due to the idxd driver interrupt completion handler uses threaded interrupt and the threaded handler is not hard or soft interrupt context. However __netif_rx() can only be called from interrupt context. Change the call to netif_rx() in order to allow completion via normal context for dmaengine drivers that utilize threaded irq handling. While the following commit changed from netif_rx() to __netif_rx(), baebdf48 ("net: dev: Makes sure netif_rx() can be invoked in any context."), the change should've been a noop instead. However, the code precedes this fix should've been using netif_rx_ni() or netif_rx_any_context(). Fixes: 548c237c ("net: Add support for NTB virtual ethernet device") Reported-by:
Jerry Dai <jerry.dai@intel.com> Tested-by:
Dave Jiang <dave.jiang@intel.com> Link: https://patch.msgid.link/20240701181538.3799546-1-dave.jiang@intel.comSigned-off-by:
-
Bartosz Golaszewski authored
The header is missing the include guards so add them. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Fixes: fb470f70 ("net: phy: aquantia: add hwmon support") Signed-off-by:
Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://patch.msgid.link/20240701080322.9569-1-brgl@bgdev.plSigned-off-by:
-
- 02 Jul, 2024 9 commits
-
-
Paolo Abeni authored
Jiawen Wu says: ==================== net: txgbe: fix MSI and INTx interrupts Fix MSI and INTx interrupts for txgbe driver. changes in v3: - Add flag wx->misc_irq_domain. - Separate commits. - Detail null-defer events. changes in v2: https://lore.kernel.org/all/20240626060703.31652-1-jiawenwu@trustnetic.com - Split into two commits. - Detail commit description. v1: https://lore.kernel.org/all/20240621080951.14368-1-jiawenwu@trustnetic.com ==================== Link: https://patch.msgid.link/20240701071416.8468-1-jiawenwu@trustnetic.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jiawen Wu authored
When using MSI/INTx interrupt, the shared interrupts are still being handled in the device remove routine, before free IRQs. So isb memory is still read after it is freed. Thus move wx_free_isb_resources() from txgbe_close() to txgbe_remove(). And fix the improper isb free action in txgbe_open() error handling path. Fixes: aefd0136 ("net: txgbe: use irq_domain for interrupt controller") Signed-off-by:
Jiawen Wu <jiawenwu@trustnetic.com> Signed-off-by:
-
Jiawen Wu authored
Rename original txgbe_misc_irq_handle() to txgbe_misc_irq_thread_fn() since it is the handle thread to wake up. And add the primary handler to deal the case of MSI/INTx, because there is a schedule NAPI poll. Fixes: aefd0136 ("net: txgbe: use irq_domain for interrupt controller") Signed-off-by:
-
Jiawen Wu authored
When using MSI or INTx interrupts, request_irq() for pdev->irq will conflict with request_threaded_irq() for txgbe->misc.irq, to cause system crash. So remove txgbe_request_irq() for MSI/INTx case, and rename txgbe_request_msix_irqs() since it only request for queue irqs. Add wx->misc_irq_domain to determine whether the driver creates an IRQ domain and threaded request the IRQs. Fixes: aefd0136 ("net: txgbe: use irq_domain for interrupt controller") Signed-off-by:
-
Jiawen Wu authored
When using MSI/INTx interrupts, wx->num_q_vectors is uninitialized. Thus there will be kernel panic in wx_alloc_q_vectors() to allocate queue vectors. Fixes: 3f703186 ("net: libwx: Add irq flow functions") Signed-off-by:
-
Yijie Yang authored
Correct member @num_por with size of right array @emac_v4_0_0_por for struct ethqos_emac_driver_data @emac_v4_0_0_data. Cc: stable@vger.kernel.org Fixes: 8c4d92e8 ("net: stmmac: dwmac-qcom-ethqos: add support for emac4 on sa8775p platforms") Signed-off-by:
Yijie Yang <quic_yijiyang@quicinc.com> Reviewed-by:
-
Sagi Grimberg authored
We only use the mapping in a single context, so kmap_local is sufficient and cheaper. Make sure to use skb_frag_foreach_page as skb frags may contain compound pages and we need to map page by page. Reported-by:
kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202406161539.b5ff7b20-oliver.sang@intel.com Fixes: 950fcaec ("datagram: consolidate datagram copy to iter helpers") Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Link: https://patch.msgid.link/20240626100008.831849-1-sagi@grimberg.meSigned-off-by:
-
Dima Ruinskiy authored
On vPro systems, the configuration of the I219-LM to achieve power gating and S0ix residency is split between the driver and the CSME FW. It was discovered that in some scenarios, where the network cable is connected and then disconnected, S0ix residency is not always reached. This was root-caused to a subset of I219-LM register writes that are not performed by the CSME FW. Therefore, the driver should perform these register writes on corporate setups, regardless of the CSME FW state. This was discovered on Meteor Lake systems; however it is likely to appear on other platforms as well. Fixes: cc23f4f0 ("e1000e: Add support for Meteor Lake") Link: https://bugzilla.kernel.org/show_bug.cgi?id=218589Signed-off-by:
Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by:
Vitaly Lifshits <vitaly.lifshits@intel.com> Signed-off-by:
-
Jakub Kicinski authored
Merge tag 'linux-can-fixes-for-6.10-20240701' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2024-07-01 Jimmy Assarsson's patch for the kvaser_usb adds a missing explicit initialization of the struct kvaser_usb_driver_info::family for the kvaser_usb_driver_info_leafimx. * tag 'linux-can-fixes-for-6.10-20240701' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: kvaser_usb: Explicitly initialize family in leafimx driver_info struct ==================== Link: https://patch.msgid.link/20240701080643.1354022-1-mkl@pengutronix.deSigned-off-by:
-
- 01 Jul, 2024 3 commits
-
-
David S. Miller authored
Merge tag 'for-net-2024-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth into main bluetooth pull request for net: - Ignore too large handle values in BIG - L2CAP: sync sock recv cb and release - hci_bcm4377: Fix msgid release - ISO: Check socket flag instead of hcon - hci_event: Fix setting of unicast qos interval - hci: disallow setting handle bigger than HCI_CONN_HANDLE_MAX - Add quirk to ignore reserved PHY bits in LE Extended Adv Report - hci_core: cancel all works upon hci_unregister_dev - btintel_pcie: Fix REVERSE_INULL issue reported by coverity - qca: Fix BT enable failure again for QCA6390 after warm reboot Signed-off-by:
-
Jakub Kicinski authored
I don't see anything checking that TCP_METRICS_ATTR_SADDR_IPV4 is at least 4 bytes long, and the policy doesn't have an entry for this attribute at all (neither does it for IPv6 but v6 is manually validated). Reviewed-by:
Eric Dumazet <edumazet@google.com> Fixes: 3e7013dd ("tcp: metrics: Allow selective get/del of tcp-metrics based on src IP") Signed-off-by:
-
Jimmy Assarsson authored
Explicitly set the 'family' driver_info struct member for leafimx. Previously, the correct operation relied on KVASER_LEAF being the first defined value in enum kvaser_usb_leaf_family. Fixes: e6c80e60 ("can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regression") Signed-off-by:
Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20240628194529.312968-1-extja@kvaser.com Cc: stable@vger.kernel.org Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
- 29 Jun, 2024 1 commit
-
-
Ghadi Elie Rahme authored
Fix UBSAN warnings that occur when using a system with 32 physical cpu cores or more, or when the user defines a number of Ethernet queues greater than or equal to FP_SB_MAX_E1x using the num_queues module parameter. Currently there is a read/write out of bounds that occurs on the array "struct stats_query_entry query" present inside the "bnx2x_fw_stats_req" struct in "drivers/net/ethernet/broadcom/bnx2x/bnx2x.h". Looking at the definition of the "struct stats_query_entry query" array: struct stats_query_entry query[FP_SB_MAX_E1x+ BNX2X_FIRST_QUEUE_QUERY_IDX]; FP_SB_MAX_E1x is defined as the maximum number of fast path interrupts and has a value of 16, while BNX2X_FIRST_QUEUE_QUERY_IDX has a value of 3 meaning the array has a total size of 19. Since accesses to "struct stats_query_entry query" are offset-ted by BNX2X_FIRST_QUEUE_QUERY_IDX, that means that the total number of Ethernet queues should not exceed FP_SB_MAX_E1x (16). However one of these queues is reserved for FCOE and thus the number of Ethernet queues should be set to [FP_SB_MAX_E1x -1] (15) if FCOE is enabled or [FP_SB_MAX_E1x] (16) if it is not. This is also described in a comment in the source code in drivers/net/ethernet/broadcom/bnx2x/bnx2x.h just above the Macro definition of FP_SB_MAX_E1x. Below is the part of this explanation that it important for this patch /* * The total number of L2 queues, MSIX vectors and HW contexts (CIDs) is * control by the number of fast-path status blocks supported by the * device (HW/FW). Each fast-path status block (FP-SB) aka non-default * status block represents an independent interrupts context that can * serve a regular L2 networking queue. However special L2 queues such * as the FCoE queue do not require a FP-SB and other components like * the CNIC may consume FP-SB reducing the number of possible L2 queues * * If the maximum number of FP-SB available is X then: * a. If CNIC is supported it consumes 1 FP-SB thus the max number of * regular L2 queues is Y=X-1 * b. In MF mode the actual number of L2 queues is Y= (X-1/MF_factor) * c. If the FCoE L2 queue is supported the actual number of L2 queues * is Y+1 * d. The number of irqs (MSIX vectors) is either Y+1 (one extra for * slow-path interrupts) or Y+2 if CNIC is supported (one additional * FP interrupt context for the CNIC). * e. The number of HW context (CID count) is always X or X+1 if FCoE * L2 queue is supported. The cid for the FCoE L2 queue is always X. */ However this driver also supports NICs that use the E2 controller which can handle more queues due to having more FP-SB represented by FP_SB_MAX_E2. Looking at the commits when the E2 support was added, it was originally using the E1x parameters: commit f2e0899f ("bnx2x: Add 57712 support"). Back then FP_SB_MAX_E2 was set to 16 the same as E1x. However the driver was later updated to take full advantage of the E2 instead of having it be limited to the capabilities of the E1x. But as far as we can tell, the array "stats_query_entry query" was still limited to using the FP-SB available to the E1x cards as part of an oversignt when the driver was updated to take full advantage of the E2, and now with the driver being aware of the greater queue size supported by E2 NICs, it causes the UBSAN warnings seen in the stack traces below. This patch increases the size of the "stats_query_entry query" array by replacing FP_SB_MAX_E1x with FP_SB_MAX_E2 to be large enough to handle both types of NICs. Stack traces: UBSAN: array-index-out-of-bounds in drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c:1529:11 index 20 is out of range for type 'stats_query_entry [19]' CPU: 12 PID: 858 Comm: systemd-network Not tainted 6.9.0-060900rc7-generic #202405052133 Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 10/21/2019 Call Trace: <TASK> dump_stack_lvl+0x76/0xa0 dump_stack+0x10/0x20 __ubsan_handle_out_of_bounds+0xcb/0x110 bnx2x_prep_fw_stats_req+0x2e1/0x310 [bnx2x] bnx2x_stats_init+0x156/0x320 [bnx2x] bnx2x_post_irq_nic_init+0x81/0x1a0 [bnx2x] bnx2x_nic_load+0x8e8/0x19e0 [bnx2x] bnx2x_open+0x16b/0x290 [bnx2x] __dev_open+0x10e/0x1d0 RIP: 0033:0x736223927a0a Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007ffc0bb2ada8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000583df50f9c78 RCX: 0000736223927a0a RDX: 0000000000000020 RSI: 0000583df50ee510 RDI: 0000000000000003 RBP: 0000583df50d4940 R08: 00007ffc0bb2adb0 R09: 0000000000000080 R10: 0000000000000000 R11: 0000000000000246 R12: 0000583df5103ae0 R13: 000000000000035a R14: 0000583df50f9c30 R15: 0000583ddddddf00 </TASK> ---[ end trace ]--- ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c:1546:11 index 28 is out of range for type 'stats_query_entry [19]' CPU: 12 PID: 858 Comm: systemd-network Not tainted 6.9.0-060900rc7-generic #202405052133 Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 10/21/2019 Call Trace: <TASK> dump_stack_lvl+0x76/0xa0 dump_stack+0x10/0x20 __ubsan_handle_out_of_bounds+0xcb/0x110 bnx2x_prep_fw_stats_req+0x2fd/0x310 [bnx2x] bnx2x_stats_init+0x156/0x320 [bnx2x] bnx2x_post_irq_nic_init+0x81/0x1a0 [bnx2x] bnx2x_nic_load+0x8e8/0x19e0 [bnx2x] bnx2x_open+0x16b/0x290 [bnx2x] __dev_open+0x10e/0x1d0 RIP: 0033:0x736223927a0a Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007ffc0bb2ada8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000583df50f9c78 RCX: 0000736223927a0a RDX: 0000000000000020 RSI: 0000583df50ee510 RDI: 0000000000000003 RBP: 0000583df50d4940 R08: 00007ffc0bb2adb0 R09: 0000000000000080 R10: 0000000000000000 R11: 0000000000000246 R12: 0000583df5103ae0 R13: 000000000000035a R14: 0000583df50f9c30 R15: 0000583ddddddf00 </TASK> ---[ end trace ]--- ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1895:8 index 29 is out of range for type 'stats_query_entry [19]' CPU: 13 PID: 163 Comm: kworker/u96:1 Not tainted 6.9.0-060900rc7-generic #202405052133 Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 10/21/2019 Workqueue: bnx2x bnx2x_sp_task [bnx2x] Call Trace: <TASK> dump_stack_lvl+0x76/0xa0 dump_stack+0x10/0x20 __ubsan_handle_out_of_bounds+0xcb/0x110 bnx2x_iov_adjust_stats_req+0x3c4/0x3d0 [bnx2x] bnx2x_storm_stats_post.part.0+0x4a/0x330 [bnx2x] ? bnx2x_hw_stats_post+0x231/0x250 [bnx2x] bnx2x_stats_start+0x44/0x70 [bnx2x] bnx2x_stats_handle+0x149/0x350 [bnx2x] bnx2x_attn_int_asserted+0x998/0x9b0 [bnx2x] bnx2x_sp_task+0x491/0x5c0 [bnx2x] process_one_work+0x18d/0x3f0 </TASK> ---[ end trace ]--- Fixes: 50f0a562 ("bnx2x: add fcoe statistics") Signed-off-by:Ghadi Elie Rahme <ghadi.rahme@canonical.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20240627111405.1037812-1-ghadi.rahme@canonical.comSigned-off-by:
-
- 28 Jun, 2024 14 commits
-
-
Luiz Augusto von Dentz authored
This fixes the following deadlock introduced by 39a92a55be13 ("bluetooth/l2cap: sync sock recv cb and release") ============================================ WARNING: possible recursive locking detected 6.10.0-rc3-g4029dba6b6f1 #6823 Not tainted -------------------------------------------- kworker/u5:0/35 is trying to acquire lock: ffff888002ec2510 (&chan->lock#2/1){+.+.}-{3:3}, at: l2cap_sock_recv_cb+0x44/0x1e0 but task is already holding lock: ffff888002ec2510 (&chan->lock#2/1){+.+.}-{3:3}, at: l2cap_get_chan_by_scid+0xaf/0xd0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&chan->lock#2/1); lock(&chan->lock#2/1); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/u5:0/35: #0: ffff888002b8a940 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work+0x750/0x930 #1: ffff888002c67dd0 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_one_work+0x44e/0x930 #2: ffff888002ec2510 (&chan->lock#2/1){+.+.}-{3:3}, at: l2cap_get_chan_by_scid+0xaf/0xd0 To fix the original problem this introduces l2cap_chan_lock at l2cap_conless_channel to ensure that l2cap_sock_recv_cb is called with chan->lock held. Fixes: 89e856e1 ("bluetooth/l2cap: sync sock recv cb and release") Signed-off-by:Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Pavel Skripkin authored
Syzbot hit warning in hci_conn_del() caused by freeing handle that was not allocated using ida allocator. This is caused by handle bigger than HCI_CONN_HANDLE_MAX passed by hci_le_big_sync_established_evt(), which makes code think it's unset connection. Add same check for handle upper bound as in hci_conn_set_handle() to prevent warning. Link: https://syzkaller.appspot.com/bug?extid=b2545b087a01a7319474 Reported-by: syzbot+b2545b087a01a7319474@syzkaller.appspotmail.com Fixes: 181a42ed ("Bluetooth: Make handle of hci_conn be unique") Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Signed-off-by:
-
Iulia Tanasescu authored
This fixes the following Smatch static checker warning: net/bluetooth/iso.c:1364 iso_sock_recvmsg() error: we previously assumed 'pi->conn->hcon' could be null (line 1359) net/bluetooth/iso.c 1347 static int iso_sock_recvmsg(struct socket *sock, struct msghdr *msg, 1348 size_t len, int flags) 1349 { 1350 struct sock *sk = sock->sk; 1351 struct iso_pinfo *pi = iso_pi(sk); 1352 1353 BT_DBG("sk %p", sk); 1354 1355 if (test_and_clear_bit(BT_SK_DEFER_SETUP, &bt_sk(sk)->flags)) { 1356 lock_sock(sk); 1357 switch (sk->sk_state) { 1358 case BT_CONNECT2: 1359 if (pi->conn->hcon && ^^^^^^^^^^^^^^ If ->hcon is NULL 1360 test_bit(HCI_CONN_PA_SYNC, &pi->conn->hcon->flags)) { 1361 iso_conn_big_sync(sk); 1362 sk->sk_state = BT_LISTEN; 1363 } else { --> 1364 iso_conn_defer_accept(pi->conn->hcon); ^^^^^^^^^^^^^^ then we're toast 1365 sk->sk_state = BT_CONFIG; 1366 } 1367 release_sock(sk); 1368 return 0; 1369 case BT_CONNECTED: 1370 if (test_bit(BT_SK_PA_SYNC, Fixes: fbdc4bc4 ("Bluetooth: ISO: Use defer setup to separate PA sync and BIG sync") Signed-off-by:Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by:
-
Edward Adam Davis authored
The problem occurs between the system call to close the sock and hci_rx_work, where the former releases the sock and the latter accesses it without lock protection. CPU0 CPU1 ---- ---- sock_close hci_rx_work l2cap_sock_release hci_acldata_packet l2cap_sock_kill l2cap_recv_frame sk_free l2cap_conless_channel l2cap_sock_recv_cb If hci_rx_work processes the data that needs to be received before the sock is closed, then everything is normal; Otherwise, the work thread may access the released sock when receiving data. Add a chan mutex in the rx callback of the sock to achieve synchronization between the sock release and recv cb. Sock is dead, so set chan data to NULL, avoid others use invalid sock pointer. Reported-and-tested-by: syzbot+b7f6f8c9303466e16c8a@syzkaller.appspotmail.com Signed-off-by:Edward Adam Davis <eadavis@qq.com> Signed-off-by:
-
Edward Adam Davis authored
hci_le_big_sync_established_evt is necessary to filter out cases where the handle value is belonging to ida id range, otherwise ida will be erroneously released in hci_conn_cleanup. Fixes: 181a42ed ("Bluetooth: Make handle of hci_conn be unique") Reported-by: syzbot+b2545b087a01a7319474@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=b2545b087a01a7319474Signed-off-by:
-
Neeraj Sanjay Kale authored
This sets the default power save mode setting to enabled. The power save feature is now stable and stress test issues, such as the TX timeout error, have been resolved. commit c7ee0bc8db32 ("Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test") With this setting, the driver will send the vendor command to FW at startup, to enable power save feature. User can disable this feature using the following vendor command: hcitool cmd 3f 23 03 00 00 (HCI_NXP_AUTO_SLEEP_MODE) Signed-off-by:Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Reviewed-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
-
Tetsuo Handa authored
syzbot is reporting that calling hci_release_dev() from hci_error_reset() due to hci_dev_put() from hci_error_reset() can cause deadlock at destroy_workqueue(), for hci_error_reset() is called from hdev->req_workqueue which destroy_workqueue() needs to flush. We need to make sure that hdev->{rx_work,cmd_work,tx_work} which are queued into hdev->workqueue and hdev->{power_on,error_reset} which are queued into hdev->req_workqueue are no longer running by the moment destroy_workqueue(hdev->workqueue); destroy_workqueue(hdev->req_workqueue); are called from hci_release_dev(). Call cancel_work_sync() on these work items from hci_unregister_dev() as soon as hdev->list is removed from hci_dev_list. Reported-by:syzbot <syzbot+da0a9c9721e36db712e8@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=da0a9c9721e36db712e8Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
-
Zijun Hu authored
Commit 272970be ("Bluetooth: hci_qca: Fix driver shutdown on closed serdev") will cause below regression issue: BT can't be enabled after below steps: cold boot -> enable BT -> disable BT -> warm reboot -> BT enable failure if property enable-gpios is not configured within DT|ACPI for QCA6390. The commit is to fix a use-after-free issue within qca_serdev_shutdown() by adding condition to avoid the serdev is flushed or wrote after closed but also introduces this regression issue regarding above steps since the VSC is not sent to reset controller during warm reboot. Fixed by sending the VSC to reset controller within qca_serdev_shutdown() once BT was ever enabled, and the use-after-free issue is also fixed by this change since the serdev is still opened before it is flushed or wrote. Verified by the reported machine Dell XPS 13 9310 laptop over below two kernel commits: commit e00fc2700a3f ("Bluetooth: btusb: Fix triggering coredump implementation for QCA") of bluetooth-next tree. commit b23d98d4 ("Bluetooth: btusb: Fix triggering coredump implementation for QCA") of linus mainline tree. Fixes: 272970be ("Bluetooth: hci_qca: Fix driver shutdown on closed serdev") Cc: stable@vger.kernel.org Reported-by:
Wren Turkal <wt@penguintechs.org> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218726Signed-off-by:
Zijun Hu <quic_zijuhu@quicinc.com> Tested-by:
-
Luiz Augusto von Dentz authored
qos->ucast interval reffers to the SDU interval, and should not be set to the interval value reported by the LE CIS Established event since the latter reffers to the ISO interval. These two interval are not the same thing: BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 6, Part G Isochronous interval: The time between two consecutive BIS or CIS events (designated ISO_Interval in the Link Layer) SDU interval: The nominal time between two consecutive SDUs that are sent or received by the upper layer. So this instead uses the following formula from the spec to calculate the resulting SDU interface: BLUETOOTH CORE SPECIFICATION Version 5.4 | Vol 6, Part G page 3075: Transport_Latency_C_To_P = CIG_Sync_Delay + (FT_C_To_P) × ISO_Interval + SDU_Interval_C_To_P Transport_Latency_P_To_C = CIG_Sync_Delay + (FT_P_To_C) × ISO_Interval + SDU_Interval_P_To_C Link: https://github.com/bluez/bluez/issues/823 Fixes: 2be22f19 ("Bluetooth: hci_event: Fix parsing of CIS Established Event") Signed-off-by:
-
Vijay Satija authored
check pdata return of skb_pull_data, instead of data. Fixes: c2b636b3 ("Bluetooth: btintel_pcie: Add support for PCIe transport") Signed-off-by:
Vijay Satija <vijay.satija@intel.com> Signed-off-by:
Kiran K <kiran.k@intel.com> Signed-off-by:
-
Hector Martin authored
We are releasing a single msgid, so the order argument to bitmap_release_region must be zero. Fixes: 8a061276 ("Bluetooth: hci_bcm4377: Add new driver for BCM4377 PCIe boards") Cc: stable@vger.kernel.org Signed-off-by:
Hector Martin <marcan@marcan.st> Reviewed-by:
Sven Peter <sven@svenpeter.dev> Reviewed-by:
Neal Gompa <neal@gompa.dev> Signed-off-by:
-
Sven Peter authored
Some Broadcom controllers found on Apple Silicon machines abuse the reserved bits inside the PHY fields of LE Extended Advertising Report events for additional flags. Add a quirk to drop these and correctly extract the Primary/Secondary_PHY field. The following excerpt from a btmon trace shows a report received with "Reserved" for "Primary PHY" on a 4388 controller: > HCI Event: LE Meta Event (0x3e) plen 26 LE Extended Advertising Report (0x0d) Num reports: 1 Entry 0 Event type: 0x2515 Props: 0x0015 Connectable Directed Use legacy advertising PDUs Data status: Complete Reserved (0x2500) Legacy PDU Type: Reserved (0x2515) Address type: Random (0x01) Address: 00:00:00:00:00:00 (Static) Primary PHY: Reserved Secondary PHY: No packets SID: no ADI field (0xff) TX power: 127 dBm RSSI: -60 dBm (0xc4) Periodic advertising interval: 0.00 msec (0x0000) Direct address type: Public (0x00) Direct address: 00:00:00:00:00:00 (Apple, Inc.) Data length: 0x00 Cc: stable@vger.kernel.org Fixes: 2e7ed5f5 ("Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync") Reported-by:Janne Grunau <j@jannau.net> Closes: https://lore.kernel.org/all/Zjz0atzRhFykROM9@robinTested-by:
-
David S. Miller authored
Merge tag 'ieee802154-for-net-2024-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan into main
-
David S. Miller authored
Tariq Toukan says: ==================== mlx5 fixes 2024-06-27 This patchset provides fixes from the team to the mlx5 core and EN drivers. The first 3 patches by Daniel replace a buggy cap field with a newly introduced one. Patch 4 by Chris de-couples ingress ACL creation from a specific flow, so it's invoked by other flows if needed. Patch 5 by Jianbo fixes a possible missing cleanup of QoS objects. Patches 6 and 7 by Leon fixes IPsec stats logic to better reflect the traffic. Series generated against: commit 02ea3120 ("octeontx2-pf: Fix coverity and klockwork issues in octeon PF driver") V2: Fixed wrong cited SHA in patch 6. ==================== Signed-off-by:
-
