- 15 Aug, 2018 7 commits
-
-
Juergen Gross authored
commit d472b3a6 upstream. skb_shinfo() can change when calling __pskb_pull_tail(): Don't cache its return value. Cc: stable@vger.kernel.org Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Linus Torvalds authored
commit 3c53776e upstream. Way back in 4.9, we committed 4cd13c21 ("softirq: Let ksoftirqd do its job"), and ever since we've had small nagging issues with it. For example, we've had: 1ff68820 ("watchdog: core: make sure the watchdog_worker is not deferred") 8d5755b3 ("watchdog: softdog: fire watchdog even if softirqs do not get to run") 217f6974 ("net: busy-poll: allow preemption in sk_busy_loop()") all of which worked around some of the effects of that commit. The DVB people have also complained that the commit causes excessive USB URB latencies, which seems to be due to the USB code using tasklets to schedule USB traffic. This seems to be an issue mainly when already living on the edge, but waiting for ksoftirqd to handle it really does seem to cause excessive latencies. Now Hanna Hawa reports that this issue isn't just limited to USB URB and DVB, but also causes timeout problems for the Marvell SoC team: "I'm facing kernel panic issue while running raid 5 on sata disks connected to Macchiatobin (Marvell community board with Armada-8040 SoC with 4 ARMv8 cores of CA72) Raid 5 built with Marvell DMA engine and async_tx mechanism (ASYNC_TX_DMA [=y]); the DMA driver (mv_xor_v2) uses a tasklet to clean the done descriptors from the queue" The latency problem causes a panic: mv_xor_v2 f0400000.xor: dma_sync_wait: timeout! Kernel panic - not syncing: async_tx_quiesce: DMA error waiting for transaction We've discussed simply just reverting the original commit entirely, and also much more involved solutions (with per-softirq threads etc). This patch is intentionally stupid and fairly limited, because the issue still remains, and the other solutions either got sidetracked or had other issues. We should probably also consider the timer softirqs to be synchronous and not be delayed to ksoftirqd (since they were the issue with the earlier watchdog problems), but that should be done as a separate patch. This does only the tasklet cases. Reported-and-tested-by:
Hanna Hawa <hannah@marvell.com> Reported-and-tested-by:
Josef Griebichler <griebichler.josef@gmx.at> Reported-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Andrey Konovalov authored
commit 12c8f25a upstream. KASAN uses the __no_sanitize_address macro to disable instrumentation of particular functions. Right now it's defined only for GCC build, which causes false positives when clang is used. This patch adds a definition for clang. Note, that clang's revision 329612 or higher is required. [andreyknvl@google.com: remove redundant #ifdef CONFIG_KASAN check] Link: http://lkml.kernel.org/r/c79aa31a2a2790f6131ed607c58b0dd45dd62a6c.1523967959.git.andreyknvl@google.com Link: http://lkml.kernel.org/r/4ad725cc903f8534f8c8a60f0daade5e3d674f8d.1523554166.git.andreyknvl@google.comSigned-off-by:
Andrey Konovalov <andreyknvl@google.com> Acked-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Paul Lawrence <paullawrence@google.com> Cc: Sandipan Das <sandipan@linux.vnet.ibm.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
John David Anglin authored
commit fedb8da9 upstream. For years I thought all parisc machines executed loads and stores in order. However, Jeff Law recently indicated on gcc-patches that this is not correct. There are various degrees of out-of-order execution all the way back to the PA7xxx processor series (hit-under-miss). The PA8xxx series has full out-of-order execution for both integer operations, and loads and stores. This is described in the following article: http://web.archive.org/web/20040214092531/http://www.cpus.hp.com/technical_references/advperf.shtml For this reason, we need to define mb() and to insert a memory barrier before the store unlocking spinlocks. This ensures that all memory accesses are complete prior to unlocking. The ldcw instruction performs the same function on entry. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.0+ Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Helge Deller authored
commit 66509a27 upstream. Enable the -mlong-calls compiler option by default, because otherwise in most cases linking the vmlinux binary fails due to truncations of R_PARISC_PCREL22F relocations. This fixes building the 64-bit defconfig. Cc: stable@vger.kernel.org # 4.0+ Signed-off-by:
-
Tadeusz Struk authored
commit 3ab2011e upstream. There is a race condition in tpm_common_write function allowing two threads on the same /dev/tpm<N>, or two different applications on the same /dev/tpmrm<N> to overwrite each other commands/responses. Fixed this by taking the priv->buffer_mutex early in the function. Also converted the priv->data_pending from atomic to a regular size_t type. There is no need for it to be atomic since it is only touched under the protection of the priv->buffer_mutex. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by:
Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
Theodore Ts'o authored
commit 50122847 upstream. Commit 8844618d: "ext4: only look at the bg_flags field if it is valid" will complain if block group zero does not have the EXT4_BG_INODE_ZEROED flag set. Unfortunately, this is not correct, since a freshly created file system has this flag cleared. It gets almost immediately after the file system is mounted read-write --- but the following somewhat unlikely sequence will end up triggering a false positive report of a corrupted file system: mkfs.ext4 /dev/vdc mount -o ro /dev/vdc /vdc mount -o remount,rw /dev/vdc Instead, when initializing the inode table for block group zero, test to make sure that itable_unused count is not too large, since that is the case that will result in some or all of the reserved inodes getting cleared. This fixes the failures reported by Eric Whiteney when running generic/230 and generic/231 in the the nojournal test case. Fixes: 8844618d ("ext4: only look at the bg_flags field if it is valid") Reported-by:
Eric Whitney <enwlinux@gmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
- 09 Aug, 2018 18 commits
-
-
Greg Kroah-Hartman authored
-
Shankara Pailoor authored
commit 92d34134 upstream. The code is assuming the buffer is max_size length, but we weren't allocating enough space for it. Signed-off-by:
Shankara Pailoor <shankarapailoor@gmail.com> Signed-off-by:
Dave Kleikamp <dave.kleikamp@oracle.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Michael J. Ruhl authored
commit b697d7d8 upstream. The __get_txreq() function can return a pointer, ERR_PTR(-EBUSY), or NULL. All of the relevant call sites look for IS_ERR, so the NULL return would lead to a NULL pointer exception. Do not use the ERR_PTR mechanism for this function. Update all call sites to handle the return value correctly. Clean up error paths to reflect return value. Fixes: 45842abb ("staging/rdma/hfi1: move txreq header code") Cc: <stable@vger.kernel.org> # 4.9.x+ Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by:
Kamenee Arumugam <kamenee.arumugam@intel.com> Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Kees Cook authored
commit e01e8063 upstream. One of the classes of kernel stack content leaks[1] is exposing the contents of prior heap or stack contents when a new process stack is allocated. Normally, those stacks are not zeroed, and the old contents remain in place. In the face of stack content exposure flaws, those contents can leak to userspace. Fixing this will make the kernel no longer vulnerable to these flaws, as the stack will be wiped each time a stack is assigned to a new process. There's not a meaningful change in runtime performance; it almost looks like it provides a benefit. Performing back-to-back kernel builds before: Run times: 157.86 157.09 158.90 160.94 160.80 Mean: 159.12 Std Dev: 1.54 and after: Run times: 159.31 157.34 156.71 158.15 160.81 Mean: 158.46 Std Dev: 1.46 Instead of making this a build or runtime config, Andy Lutomirski recommended this just be enabled by default. [1] A noisy search for many kinds of stack content leaks can be seen here: https://cve.mitre.org/cgi-bin/cvekey.cgi?keyword=linux+kernel+stack+leak I did some more with perf and cycle counts on running 100,000 execs of /bin/true. before: Cycles: 218858861551 218853036130 214727610969 227656844122 224980542841 Mean: 221015379122.60 Std Dev: 4662486552.47 after: Cycles: 213868945060 213119275204 211820169456 224426673259 225489986348 Mean: 217745009865.40 Std Dev: 5935559279.99 It continues to look like it's faster, though the deviation is rather wide, but I'm not sure what I could do that would be less noisy. I'm open to ideas! Link: http://lkml.kernel.org/r/20180221021659.GA37073@beastSigned-off-by:
Kees Cook <keescook@chromium.org> Acked-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Srivatsa S. Bhat <srivatsa@csail.mit.edu> Reviewed-by:
Srinidhi Rao <srinidhir@vmware.com> Signed-off-by:
-
Konstantin Khlebnikov authored
commit ca182551 upstream. Kmemleak considers any pointers on task stacks as references. This patch clears newly allocated and reused vmap stacks. Link: http://lkml.kernel.org/r/150728990124.744199.8403409836394318684.stgit@buzzSigned-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Eric Dumazet authored
commit 58152ecb upstream. In case skb in out_or_order_queue is the result of multiple skbs coalescing, we would like to get a proper gso_segs counter tracking, so that future tcp_drop() can report an accurate number. I chose to not implement this tracking for skbs in receive queue, since they are not dropped, unless socket is disconnected. Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Signed-off-by:
-
Filipe Manana authored
commit bd3599a0 upstream. When we clone a range into a file we can end up dropping existing extent maps (or trimming them) and replacing them with new ones if the range to be cloned overlaps with a range in the destination inode. When that happens we add the new extent maps to the list of modified extents in the inode's extent map tree, so that a "fast" fsync (the flag BTRFS_INODE_NEEDS_FULL_SYNC not set in the inode) will see the extent maps and log corresponding extent items. However, at the end of range cloning operation we do truncate all the pages in the affected range (in order to ensure future reads will not get stale data). Sometimes this truncation will release the corresponding extent maps besides the pages from the page cache. If this happens, then a "fast" fsync operation will miss logging some extent items, because it relies exclusively on the extent maps being present in the inode's extent tree, leading to data loss/corruption if the fsync ends up using the same transaction used by the clone operation (that transaction was not committed in the meanwhile). An extent map is released through the callback btrfs_invalidatepage(), which gets called by truncate_inode_pages_range(), and it calls __btrfs_releasepage(). The later ends up calling try_release_extent_mapping() which will release the extent map if some conditions are met, like the file size being greater than 16Mb, gfp flags allow blocking and the range not being locked (which is the case during the clone operation) nor being the extent map flagged as pinned (also the case for cloning). The following example, turned into a test for fstests, reproduces the issue: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ xfs_io -f -c "pwrite -S 0x18 9000K 6908K" /mnt/foo $ xfs_io -f -c "pwrite -S 0x20 2572K 156K" /mnt/bar $ xfs_io -c "fsync" /mnt/bar # reflink destination offset corresponds to the size of file bar, # 2728Kb minus 4Kb. $ xfs_io -c ""reflink ${SCRATCH_MNT}/foo 0 2724K 15908K" /mnt/bar $ xfs_io -c "fsync" /mnt/bar $ md5sum /mnt/bar 95a95813a8c2abc9aa75a6c2914a077e /mnt/bar <power fail> $ mount /dev/sdb /mnt $ md5sum /mnt/bar 207fd8d0b161be8a84b945f0df8d5f8d /mnt/bar # digest should be 95a95813a8c2abc9aa75a6c2914a077e like before the # power failure In the above example, the destination offset of the clone operation corresponds to the size of the "bar" file minus 4Kb. So during the clone operation, the extent map covering the range from 2572Kb to 2728Kb gets trimmed so that it ends at offset 2724Kb, and a new extent map covering the range from 2724Kb to 11724Kb is created. So at the end of the clone operation when we ask to truncate the pages in the range from 2724Kb to 2724Kb + 15908Kb, the page invalidation callback ends up removing the new extent map (through try_release_extent_mapping()) when the page at offset 2724Kb is passed to that callback. Fix this by setting the bit BTRFS_INODE_NEEDS_FULL_SYNC whenever an extent map is removed at try_release_extent_mapping(), forcing the next fsync to search for modified extents in the fs/subvolume tree instead of relying on the presence of extent maps in memory. This way we can continue doing a "fast" fsync if the destination range of a clone operation does not overlap with an existing range or if any of the criteria necessary to remove an extent map at try_release_extent_mapping() is not met (file size not bigger then 16Mb or gfp flags do not allow blocking). CC: stable@vger.kernel.org # 3.16+ Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Esben Haabendal authored
commit 9f9e3e0d upstream. Make sure to call reinit_completion() before dma is started to avoid race condition where reinit_completion() is called after complete() and before wait_for_completion_timeout(). Signed-off-by:
Esben Haabendal <eha@deif.com> Fixes: ce1a7884 ("i2c: imx: add DMA support for freescale i2c driver") Reviewed-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org Signed-off-by:
-
Masami Hiramatsu authored
commit 73c8d894 upstream. Maintain the tracing on/off setting of the ring_buffer when switching to the trace buffer snapshot. Taking a snapshot is done by swapping the backup ring buffer (max_tr_buffer). But since the tracing on/off setting is defined by the ring buffer, when swapping it, the tracing on/off setting can also be changed. This causes a strange result like below: /sys/kernel/debug/tracing # cat tracing_on 1 /sys/kernel/debug/tracing # echo 0 > tracing_on /sys/kernel/debug/tracing # cat tracing_on 0 /sys/kernel/debug/tracing # echo 1 > snapshot /sys/kernel/debug/tracing # cat tracing_on 1 /sys/kernel/debug/tracing # echo 1 > snapshot /sys/kernel/debug/tracing # cat tracing_on 0 We don't touch tracing_on, but snapshot changes tracing_on setting each time. This is an anomaly, because user doesn't know that each "ring_buffer" stores its own tracing-enable state and the snapshot is done by swapping ring buffers. Link: http://lkml.kernel.org/r/153149929558.11274.11730609978254724394.stgit@devbox Cc: Ingo Molnar <mingo@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Hiraku Toyooka <hiraku.toyooka@cybertrust.co.jp> Cc: stable@vger.kernel.org Fixes: debdd57f ("tracing: Make a snapshot feature available from userspace") Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> [ Updated commit log and comment in the code ] Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Vitaly Kuznetsov authored
commit a0040c01 upstream. Hyper-V instances support PCI pass-through which is implemented through PV pci-hyperv driver. When a device is passed through, a new root PCI bus is created in the guest. The bus sits on top of VMBus and has no associated information in ACPI. acpi_pci_add_bus() in this case proceeds all the way to acpi_evaluate_dsm(), which reports ACPI: \: failed to evaluate _DSM (0x1001) While acpi_pci_slot_enumerate() and acpiphp_enumerate_slots() are protected against ACPI_HANDLE() being NULL and do nothing, acpi_evaluate_dsm() is not and gives us the error. It seems the correct fix is to not do anything in acpi_pci_add_bus() in such cases. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: Sinan Kaya <okaya@kernel.org> Signed-off-by:
-
Theodore Ts'o authored
commit 44de022c upstream. Ext4_check_descriptors() was getting called before s_gdb_count was initialized. So for file systems w/o the meta_bg feature, allocation bitmaps could overlap the block group descriptors and ext4 wouldn't notice. For file systems with the meta_bg feature enabled, there was a fencepost error which would cause the ext4_check_descriptors() to incorrectly believe that the block allocation bitmap overlaps with the block group descriptor blocks, and it would reject the mount. Fix both of these problems. Signed-off-by:
Benjamin Gilbert <bgilbert@redhat.com> Signed-off-by:
-
Dmitry Safonov authored
commit 91874ecf upstream. It's legal to have 64 groups for netlink_sock. As user-supplied nladdr->nl_groups is __u32, it's possible to subscribe only to first 32 groups. The check for correctness of .bind() userspace supplied parameter is done by applying mask made from ngroups shift. Which broke Android as they have 64 groups and the shift for mask resulted in an overflow. Fixes: 61f4b237 ("netlink: Don't shift with UB on nlk->ngroups") Cc: "David S. Miller" <davem@davemloft.net> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Reported-and-Tested-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Dmitry Safonov <dima@arista.com> Signed-off-by:
-
Dmitry Safonov authored
[ Upstream commit 61f4b237 ] On i386 nlk->ngroups might be 32 or 0. Which leads to UB, resulting in hang during boot. Check for 0 ngroups and use (unsigned long long) as a type to shift. Fixes: 7acf9d42 ("netlink: Do not subscribe to non-existent groups"). Reported-by:
kernel test robot <rong.a.chen@intel.com> Signed-off-by:
-
Dmitry Safonov authored
[ Upstream commit 7acf9d42 ] Make ABI more strict about subscribing to group > ngroups. Code doesn't check for that and it looks bogus. (one can subscribe to non-existing group) Still, it's possible to bind() to all possible groups with (-1) Cc: "David S. Miller" <davem@davemloft.net> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: netdev@vger.kernel.org Signed-off-by:
-
Anna-Maria Gleixner authored
commit 80d20d35 upstream. local_timer_softirq_pending() checks whether the timer softirq is pending with: local_softirq_pending() & TIMER_SOFTIRQ. This is wrong because TIMER_SOFTIRQ is the softirq number and not a bitmask. So the test checks for the wrong bit. Use BIT(TIMER_SOFTIRQ) instead. Fixes: 5d62c183 ("nohz: Prevent a timer interrupt storm in tick_nohz_stop_sched_tick()") Signed-off-by:
Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by:
Daniel Bristot de Oliveira <bristot@redhat.com> Acked-by:
Frederic Weisbecker <frederic@kernel.org> Cc: bigeasy@linutronix.de Cc: peterz@infradead.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180731161358.29472-1-anna-maria@linutronix.deSigned-off-by:
-
Thomas Gleixner authored
commit d1f0301b upstream. The support of force threading interrupts which are set up with both a primary and a threaded handler wreckaged the setup of regular requested threaded interrupts (primary handler == NULL). The reason is that it does not check whether the primary handler is set to the default handler which wakes the handler thread. Instead it replaces the thread handler with the primary handler as it would do with force threaded interrupts which have been requested via request_irq(). So both the primary and the thread handler become the same which then triggers the warnon that the thread handler tries to wakeup a not configured secondary thread. Fortunately this only happens when the driver omits the IRQF_ONESHOT flag when requesting the threaded interrupt, which is normaly caught by the sanity checks when force irq threading is disabled. Fix it by skipping the force threading setup when a regular threaded interrupt is requested. As a consequence the interrupt request which lacks the IRQ_ONESHOT flag is rejected correctly instead of silently wreckaging it. Fixes: 2a1d3ab8 ("genirq: Handle force threading of irqs with primary and thread handler") Reported-by:
Kurt Kanzenbach <kurt.kanzenbach@linutronix.de> Signed-off-by:
-
Anil Gurumurthy authored
commit b4146c49 upstream. Propagate the task management completion status properly to avoid unnecessary waits for commands to complete. Fixes: faef62d1 ("[SCSI] qla2xxx: Fix Task Management command asynchronous handling") Cc: <stable@vger.kernel.org> Signed-off-by:
Anil Gurumurthy <anil.gurumurthy@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Quinn Tran authored
commit b08abbd9 upstream. During unload process, the chip can encounter problem where a FW dump would be captured. For this case, the full reset sequence will be skip to bring the chip back to full operational state. Fixes: e315cd28 ("[SCSI] qla2xxx: Code changes for qla data structure refactoring") Cc: <stable@vger.kernel.org> Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
-
- 06 Aug, 2018 15 commits
-
-
Greg Kroah-Hartman authored
-
Tony Battersby authored
commit c170e5a8 upstream. Fix a minor memory leak when there is an error opening a /dev/sg device. Fixes: cc833acb ("sg: O_EXCL and other lock handling") Cc: <stable@vger.kernel.org> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
Tony Battersby <tonyb@cybernetics.com> Reviewed-by:
Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by:
-
Boris Brezillon authored
commit a6a00918 upstream. This is needed to ensure ->is_unity is correct when the plane was previously configured to output a multi-planar format with scaling enabled, and is then being reconfigured to output a uniplanar format. Fixes: fc04023f ("drm/vc4: Add support for YUV planes.") Cc: <stable@vger.kernel.org> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180724133601.32114-1-boris.brezillon@bootlin.comSigned-off-by:
-
Herbert Xu authored
commit 46d8c4b2 upstream. This was detected by the self-test thanks to Ard's chunking patch. I finally got around to testing this out on my ancient Via box. It turns out that the workaround got the assembly wrong and we end up doing count + initial cycles of the loop instead of just count. This obviously causes corruption, either by overwriting the source that is yet to be processed, or writing over the end of the buffer. On CPUs that don't require the workaround only ECB is affected. On Nano CPUs both ECB and CBC are affected. This patch fixes it by doing the subtraction prior to the assembly. Fixes: a76c1c23 ("crypto: padlock-aes - work around Nano CPU...") Cc: <stable@vger.kernel.org> Reported-by:
Jamie Heilman <jamie@audible.transient.net> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Roman Kagan authored
commit 63aff655 upstream. VPID for the nested vcpu is allocated at vmx_create_vcpu whenever nested vmx is turned on with the module parameter. However, it's only freed if the L1 guest has executed VMXON which is not a given. As a result, on a system with nested==on every creation+deletion of an L1 vcpu without running an L2 guest results in leaking one vpid. Since the total number of vpids is limited to 64k, they can eventually get exhausted, preventing L2 from starting. Delay allocation of the L2 vpid until VMXON emulation, thus matching its freeing. Fixes: 5c614b35 Cc: stable@vger.kernel.org Signed-off-by:
Roman Kagan <rkagan@virtuozzo.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Jiang Biao authored
commit 89da619b upstream. Kernel panic when with high memory pressure, calltrace looks like, PID: 21439 TASK: ffff881be3afedd0 CPU: 16 COMMAND: "java" #0 [ffff881ec7ed7630] machine_kexec at ffffffff81059beb #1 [ffff881ec7ed7690] __crash_kexec at ffffffff81105942 #2 [ffff881ec7ed7760] crash_kexec at ffffffff81105a30 #3 [ffff881ec7ed7778] oops_end at ffffffff816902c8 #4 [ffff881ec7ed77a0] no_context at ffffffff8167ff46 #5 [ffff881ec7ed77f0] __bad_area_nosemaphore at ffffffff8167ffdc #6 [ffff881ec7ed7838] __node_set at ffffffff81680300 #7 [ffff881ec7ed7860] __do_page_fault at ffffffff8169320f #8 [ffff881ec7ed78c0] do_page_fault at ffffffff816932b5 #9 [ffff881ec7ed78f0] page_fault at ffffffff8168f4c8 [exception RIP: _raw_spin_lock_irqsave+47] RIP: ffffffff8168edef RSP: ffff881ec7ed79a8 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffffea0019740d00 RCX: ffff881ec7ed7fd8 RDX: 0000000000020000 RSI: 0000000000000016 RDI: 0000000000000008 RBP: ffff881ec7ed79a8 R8: 0000000000000246 R9: 000000000001a098 R10: ffff88107ffda000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000008 R14: ffff881ec7ed7a80 R15: ffff881be3afedd0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 It happens in the pagefault and results in double pagefault during compacting pages when memory allocation fails. Analysed the vmcore, the page leads to second pagefault is corrupted with _mapcount=-256, but private=0. It's caused by the race between migration and ballooning, and lock missing in virtballoon_migratepage() of virtio_balloon driver. This patch fix the bug. Fixes: e2250429 ("virtio_balloon: introduce migration primitives to balloon pages") Cc: stable@vger.kernel.org Signed-off-by:
Jiang Biao <jiang.biao2@zte.com.cn> Signed-off-by:
Huang Chong <huang.chong@zte.com.cn> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Jeremy Cline authored
commit c8e8cd57 upstream. 'call' is a user-controlled value, so sanitize the array index after the bounds check to avoid speculating past the bounds of the 'nargs' array. Found with the help of Smatch: net/socket.c:2508 __do_sys_socketcall() warn: potential spectre issue 'nargs' [r] (local cap) Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Jeremy Cline <jcline@redhat.com> Signed-off-by:
-
Anton Vasilyev authored
commit 72c05f32 upstream. ems_usb_probe() allocates memory for dev->tx_msg_buffer, but there is no its deallocation in ems_usb_disconnect(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Anton Vasilyev <vasilyev@ispras.ru> Cc: <stable@vger.kernel.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Linus Torvalds authored
commit 71755ee5 upstream. The squashfs fragment reading code doesn't actually verify that the fragment is inside the fragment table. The end result _is_ verified to be inside the image when actually reading the fragment data, but before that is done, we may end up taking a page fault because the fragment table itself might not even exist. Another report from Anatoly and his endless squashfs image fuzzing. Reported-by:
Анатолий Тросиненко <anatoly.trosinenko@gmail.com> Acked-by:: Phillip Lougher <phillip.lougher@gmail.com>, Cc: Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Linus Torvalds authored
commit d5125847 upstream. Anatoly reports another squashfs fuzzing issue, where the decompression parameters themselves are in a compressed block. This causes squashfs_read_data() to be called in order to read the decompression options before the decompression stream having been set up, making squashfs go sideways. Reported-by:
Phillip Lougher <phillip.lougher@gmail.com> Cc: stable@kernel.org Signed-off-by:
-
Jose Abreu authored
[ Upstream commit b7d0f08e ] WoL won't work in PCI-based setups because we are not saving the PCI EP state before entering suspend state and not allowing D3 wake. Fix this by using a wrapper around stmmac_{suspend/resume} which correctly sets the PCI EP state. Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by:
-
Jeremy Cline authored
[ Upstream commit bc5b6c0b ] 'protocol' is a user-controlled value, so sanitize it after the bounds check to avoid using it for speculative out-of-bounds access to arrays indexed by it. This addresses the following accesses detected with the help of smatch: * net/netlink/af_netlink.c:654 __netlink_create() warn: potential spectre issue 'nlk_cb_mutex_keys' [w] * net/netlink/af_netlink.c:654 __netlink_create() warn: potential spectre issue 'nlk_cb_mutex_key_strings' [w] * net/netlink/af_netlink.c:685 netlink_create() warn: potential spectre issue 'nl_table' [w] (local cap) Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit a94c689e ] If a DSA slave network device was previously disabled, there is no need to suspend or resume it. Fixes: 24462549 ("net: dsa: allow switch drivers to implement suspend/resume hooks") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 4672694b ] ip_frag_queue() might call pskb_pull() on one skb that is already in the fragment queue. We need to take care of possible truesize change, or we might have an imbalance of the netns frags memory usage. IPv6 is immune to this bug, because RFC5722, Section 4, amended by Errata ID 3089 states : When reassembling an IPv6 datagram, if one or more its constituent fragments is determined to be an overlapping fragment, the entire datagram (and any constituent fragments) MUST be silently discarded. Fixes: 158f323b ("net: adjust skb->truesize in pskb_expand_head()") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 56e2c94f ] We currently check current frags memory usage only when a new frag queue is created. This allows attackers to first consume the memory budget (default : 4 MB) creating thousands of frag queues, then sending tiny skbs to exceed high_thresh limit by 2 to 3 order of magnitude. Note that before commit 648700f7 ("inet: frags: use rhashtables for reassembly units"), work queue could be starved under DOS, getting no cpu cycles. After commit 648700f7, only the per frag queue timer can eventually remove an incomplete frag queue and its skbs. Fixes: b13d3cbf ("inet: frag: move eviction of queues to work queue") Signed-off-by:
Jann Horn <jannh@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: Peter Oskolkov <posk@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
