Now that CQ-completion based jobs do not trigger a reset upon failure,
failure of such jobs (e.g., MMU cache invalidation) should be handled
by the caller itself depending on the error code returned to it.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Don't use padX for actual reservedX fields.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>

Since the err_cause register is unprivileged, we should read it from
the driver instead of using the param that came from the FW.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

- remove reset_sleep_ms arg from functions that don't use it.
- move the call msleep(reset_sleep_ms) from btm poll to gaudi2_hw_fini
as it is called from there already for other flow.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

In hw_fini callback, we use either the cpucp packet method or polling a
register. Currently we return error only in the case of cpucp packet
failure. In this patch we also return error if polling timed out.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Due to a firmware bug we need to increase reset poll timeout
or else we will timeout in secured environments.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Engines idle state can't always be verified between changes of
engine modes (e.g., stall/halt).
For example, if a CS is inflight when altering engine's mode,
idle state will return NOT idle, always.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Copy the most up-to-date interface files to the firmware.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>

There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

This function is only called inside gaudi2.c file.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202303071320.X5ouBlNY-lkp@intel.com/Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>

pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since
commit f26e58bf ("PCI/AER: Enable error reporting when AER is native"),
the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.

Remove the redundant pci_enable_pcie_error_reporting() call from the
driver.  Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.

Note that this only controls ERR_* Messages from the device.  An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The memory manager IDR is currently destroyed when user releases the
file descriptor.
However, at this point the user context might be still held, and memory
buffers might be still in use.
Later on, calls to release those buffers will fail due to not finding
their handles in the IDR, leading to a memory leak.
To avoid this leak, split the IDR destruction from the memory manager
fini, and postpone it to hpriv_release() when there is no user context
and no buffers are used.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

We plan to do soft-reset either by mmio or by using cpucp packet
depending on the FW version. We don't want to check FW version in two
different places for that (execute soft-reset and wait to soft-reset)
so move the waiting to gaudi2_execute_soft_reset. This also makes sense
because the cpucp also does the waiting.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The user might want to stall/resume engines to perform power testing
for various scenarios. Because our current
HL_CS_FLAGS_ENGINE_CORE_COMMAND command only handles the engines' cores,
we need to add another opcode for handling entire engine and not just
its core.

The user supplies an array, where each entry holds the engine's ID and
the command to send to the engine. The size of the array is limited
by the number of engines in the ASIC (only Gaudi2 is currently
supported).
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

compose_device_in_use_info() was added to handle the snprintf() return
value in a single place.
However, the buffer size in print_device_in_use_info() is set such that
it would be enough for the max possible print, so
compose_device_in_use_info() is not really needed.
Moreover, scnprintf() can be used instead of snprintf(), to save the
check if the return value larger than the given size.

Cc: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

print more informative message when failing in dirty state
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

There are two reasons why mutex is better here:
1. There's a critical section relatively long, where in
certain scenarios (e.g., multiple VM allocations) taking a spinlock
might cause noticeable performance degradation.
2. It will remove the incorrect usage of mutex under
spin_lock (where preemption is disabled).
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

We can allow userspace to query the dram usage during soft-reset.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The PDMA/EDMA is_idle routines didn't check the correct CORE register
in order to get the accurate idle state.
Moreover, it's better to make the is_idle routine more robust by adding
additional checks (IS_HALTED) before announcing that the core is idle.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Is appears that the flag -
DCORE0_TPC0_CFG_STATUS_VECTOR_PIPE_EMPTY_MASK, has no actual use when
it comes to querying TPC idleness, since this flag's corresponding bit
turns-off after stalling the engine, and turns back on after resuming
it.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Run spell checker on the code and fix accordingly.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

In case the KDMA fails scrubbing the DCCMs (following a soft-reset
upon device release), the driver will only print failure until reset
flow ends, rather than escalating it into a hard-reset.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Add notifications to user in case of decoder abnormal interrupts, and
use the graceful reset mechanism if reset is required.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Since hw_fini return error code for failure indication, we should
check its return value. Currently it might only fail upon soft-reset
from hl_device_reset. Later patch will add hw_fini failure in case of
polling timeout in hard-reset.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

is_idle() was too long, so break it up for readability.
In addition, we can now use the new sub-routines from other places.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Compute driver threads names will start with hlX-*, when X is the
device id.
This will help distinguish them from the NIC thread names.
Signed-off-by: Sagiv Ozeri <sozeri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Add a helper function to search the vm hash for a node with a given
virtual address.
As opposed to the current code, this function explicitly returns NULL
when no node is found, instead of basing on the loop cursor object's
value.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

'irq_handler' in gaudi2_enable_msix(), is just assigned with a function
name and then used when calling request_threaded_irq().
Remove the variable and use the function name directly as an argument.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

We later use cpucp packet for soft reset which might fail
so we should be able propagate the failure case.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

Remove leading zeroes when printing the idle mask to make it clearer.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

Make the comments align with the order of the fields in the structure
Signed-off-by: Sagiv Ozeri <sozeri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

smatch reports
drivers/accel/habanalabs/common/device.c:2619:6: warning:
  symbol 'hl_capture_hw_err' was not declared. Should it be static?
drivers/accel/habanalabs/common/device.c:2641:6: warning:
  symbol 'hl_capture_fw_err' was not declared. Should it be static?

both are only used in device.c, so they should be static
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Building with clang W=2 has several similar warnings
drivers/accel/habanalabs/common/decoder.c:46:51: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
static void
dec_error_intr_work(struct hl_device *hdev, u32 base_addr, u32 core_id)
                                                  ^
drivers/accel/habanalabs/common/security.h:13:26: note: previous declaration is here
extern struct hl_device *hdev;
                         ^

There is no global definition of hdev, so the extern is not needed.
Searched with
grep -r '^struct' . | grep hl_dev

Change to an forward decl to resolve these issues
drivers/accel/habanalabs/common/mmu/../security.h:133:40: error: ‘struct hl_device’ declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
  133 |         bool (*skip_block_hook)(struct hl_device *hdev,
      |                                        ^~~~~~~~~
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The cpu accessible dma allocations use the gen_pool api which actually
does not allocate new memory from the system but manages memory already
allocated before. When tracing this together with real dma
allocation/free it cause confusing logs like a '0' dma address and
a cpu address appearing twice etc.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

in the out_err flow, combine the two cases of soft-reset since
they have mostly common code. In addition unlock reset_info.lock
after touching reset count.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

Because this field is only used for debug print,
we can do more precise debug directly instead.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

To match their description above the function
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

Align assignment of reset_upon_device_release to the convention used
in this function.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

hl_irq_handler_default() is not used and can be removed.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

"eq_base[eq->ci].hdr.ctl" is used directly in a print without a
le32_to_cpu() conversion.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>