- 30 May, 2018 40 commits
-
-
Andrea Parri authored
[ Upstream commit 472e8c55 ] Successful RMW operations are supposed to be fully ordered, but Alpha's xchg() and cmpxchg() do not meet this requirement. Will Deacon noticed the bug: > So MP using xchg: > > WRITE_ONCE(x, 1) > xchg(y, 1) > > smp_load_acquire(y) == 1 > READ_ONCE(x) == 0 > > would be allowed. ... which thus violates the above requirement. Fix it by adding a leading smp_mb() to the xchg() and cmpxchg() implementations. Reported-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Andrea Parri <parri.andrea@gmail.com> Acked-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-alpha@vger.kernel.org Link: http://lkml.kernel.org/r/1519291488-5752-1-git-send-email-parri.andrea@gmail.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Randy Dunlap authored
[ Upstream commit 120f3b11 ] security/integrity/digsig.c has build errors on some $ARCH due to a missing header file, so add it. security/integrity/digsig.c:146:2: error: implicit declaration of function 'vfree' [-Werror=implicit-function-declaration] Reported-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: linux-integrity@vger.kernel.org Link: http://kisskb.ellerman.id.au/kisskb/head/13396/Signed-off-by:
James Morris <james.morris@microsoft.com> Signed-off-by:
-
Johannes Berg authored
[ Upstream commit 657308f7 ] Similar to the ancient commit a5fe8e76 ("regulatory: add NUL to alpha2"), add another byte to alpha2 in the request struct so that when we use nla_put_string(), we don't overrun anything. Fixes: 73d54c9e ("cfg80211: add regulatory netlink multicast group") Reported-by:
Kees Cook <keescook@google.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 88e80c62 ] If an attempt is made to disable RX checksums, USB adapter is changed but netdev->features is not, because smsc75xx_set_features() returns a non zero value. This throws errors from netdev_rx_csum_fault() : <devname>: hw csum failure Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit ba688783 ] We need to enable PM runtime on omap1 also as otherwise we will get errors: omap_timer omap_timer.1: omap_dm_timer_probe: pm_runtime_get_sync failed! omap_timer: probe of omap_timer.1 failed with error -13 ... We are checking for OMAP_TIMER_NEEDS_RESET flag elsewhere so this is safe to do. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Keerthy <j-keerthy@ti.com> Cc: Ladislav Michl <ladis@linux-mips.org> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Eric Biggers authored
[ Upstream commit 6459ae38 ] If none of the certificates in a SignerInfo's certificate chain match a trusted key, nor is the last certificate signed by a trusted key, then pkcs7_validate_trust_one() tries to check whether the SignerInfo's signature was made directly by a trusted key. But, it actually fails to set the 'sig' variable correctly, so it actually verifies the last signature seen. That will only be the SignerInfo's signature if the certificate chain is empty; otherwise it will actually be the last certificate's signature. This is not by itself a security problem, since verifying any of the certificates in the chain should be sufficient to verify the SignerInfo. Still, it's not working as intended so it should be fixed. Fix it by setting 'sig' correctly for the direct verification case. Fixes: 757932e6 ("PKCS#7: Handle PKCS#7 messages that contain no X.509 certs") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Sebastian Ott authored
[ Upstream commit 410d5e13 ] When we terminate driver I/O (because we need to stop using a certain channel path) we also need to ensure that a timer (which may have been set up using ccw_device_start_timeout) is cleared. Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Sebastian Ott authored
[ Upstream commit 770b55c9 ] When a timeout occurs for users of ccw_device_start_timeout we will stop the IO and call the drivers int handler with the irb pointer set to ERR_PTR(-ETIMEDOUT). Sometimes however we'd set the irb pointer to ERR_PTR(-EIO) which is not intended. Just set the correct value in all codepaths. Reported-by:
Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by:
-
Sebastian Ott authored
[ Upstream commit f97a6b6c ] There are cases a device driver can't start IO because the device is currently in use by cio. In this case the device driver is notified when the device is usable again. Using ccw_device_start_timeout we would set the timeout (and change an existing timeout) before we test for internal usage. Worst case this could lead to an unexpected timer deletion. Fix this by setting the timeout after we test for internal usage. Signed-off-by:
-
Mark Lord authored
[ Upstream commit 083b2090 ] I am using SECCOMP to filter syscalls on a ppc32 platform, and noticed that the JIT compiler was failing on the BPF even though the interpreter was working fine. The issue was that the compiler was missing one of the instructions used by SECCOMP, so here is a patch to enable JIT for that instruction. Fixes: eb84bab0 ("ppc: Kconfig: Enable BPF JIT on ppc32") Signed-off-by:
Mark Lord <mlord@pobox.com> Acked-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
-
David Rientjes authored
[ Upstream commit 88913bd8 ] chan->n_subbufs is set by the user and relay_create_buf() does a kmalloc() of chan->n_subbufs * sizeof(size_t *). kmalloc_slab() will generate a warning when this fails if chan->subbufs * sizeof(size_t *) > KMALLOC_MAX_SIZE. Limit chan->n_subbufs to the maximum allowed kmalloc() size. Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1802061216100.122576@chino.kir.corp.google.com Fixes: f6302f1b ("relay: prevent integer overflow in relay_open()") Signed-off-by:
David Rientjes <rientjes@google.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 53b8d89d ] gcc warns about a possible overflow of the kmem_cache string, when adding four characters to a string of the same length: drivers/md/raid5.c: In function 'setup_conf': drivers/md/raid5.c:2207:34: error: '-alt' directive writing 4 bytes into a region of size between 1 and 32 [-Werror=format-overflow=] sprintf(conf->cache_name[1], "%s-alt", conf->cache_name[0]); ^~~~ drivers/md/raid5.c:2207:2: note: 'sprintf' output between 5 and 36 bytes into a destination of size 32 sprintf(conf->cache_name[1], "%s-alt", conf->cache_name[0]); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ If I'm counting correctly, we need 11 characters for the fixed part of the string and 18 characters for a 64-bit pointer (when no gendisk is used), so that leaves three characters for conf->level, which should always be sufficient. This makes the code use snprintf() with the correct length, to make the code more robust against changes, and to get the compiler to shut up. In commit f4be6b43 ("md/raid5: ensure we create a unique name for kmem_cache when mddev has no gendisk") from 2010, Neil said that the pointer could be removed "shortly" once devices without gendisk are disallowed. I have no idea if that happened, but if it did, that should probably be changed as well. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Shaohua Li <sh.li@alibaba-inc.com> Signed-off-by:
-
Andrea Parri authored
[ Upstream commit cb13b424 ] Continuing along with the fight against smp_read_barrier_depends() [1] (or rather, against its improper use), add an unconditional barrier to cmpxchg. This guarantees that dependency ordering is preserved when a dependency is headed by an unsuccessful cmpxchg. As it turns out, the change could enable further simplification of LKMM as proposed in [2]. [1] https://marc.info/?l=linux-kernel&m=150884953419377&w=2 https://marc.info/?l=linux-kernel&m=150884946319353&w=2 https://marc.info/?l=linux-kernel&m=151215810824468&w=2 https://marc.info/?l=linux-kernel&m=151215816324484&w=2 [2] https://marc.info/?l=linux-kernel&m=151881978314872&w=2Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Acked-by:
-
Wolfram Sang authored
[ Upstream commit 1293b619 ] Due to a typo, the mask was destroyed by a comparison instead of a bit shift. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit a588a8bb ] The exynos DRM driver uses real-time 'struct timeval' values for exporting its timestamps to user space. This has multiple problems: 1. signed seconds overflow in y2038 2. the 'struct timeval' definition is deprecated in the kernel 3. time may jump or go backwards after a 'settimeofday()' syscall 4. other DRM timestamps are in CLOCK_MONOTONIC domain, so they can't be compared 5. exporting microseconds requires a division by 1000, which may be slow on some architectures. The code existed in two places before, but the IPP portion was removed in 8ded5941 ("drm/exynos: ipp: Remove Exynos DRM IPP subsystem"), so we no longer need to worry about it. Ideally timestamps should just use 64-bit nanoseconds instead, but of course we can't change that now. Instead, this tries to address the first four points above by using monotonic 'timespec' values. According to Tobias Jakobi, user space doesn't care about the timestamp at the moment, so we can change the format. Even if there is something looking at them, it will work just fine with monotonic times as long as the application only looks at the relative values between two events. Link: https://patchwork.kernel.org/patch/10038593/ Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by:
Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by:
-
Yufen Yu authored
[ Upstream commit 01a69cab ] In the case of 'recover', an r10bio with R10BIO_WriteError & R10BIO_IsRecover will be progressed by handle_write_completed(). This function traverses all r10bio->devs[copies]. If devs[m].repl_bio != NULL, it thinks conf->mirrors[dev].replacement is also not NULL. However, this is not always true. When there is an rdev of raid10 has replacement, then each r10bio ->devs[m].repl_bio != NULL in conf->r10buf_pool. However, in 'recover', even if corresponded replacement is NULL, it doesn't clear r10bio ->devs[m].repl_bio, resulting in replacement NULL deference. This bug was introduced when replacement support for raid10 was added in Linux 3.3. As NeilBrown suggested: Elsewhere the determination of "is this device part of the resync/recovery" is made by resting bio->bi_end_io. If this is end_sync_write, then we tried to write here. If it is NULL, then we didn't try to write. Fixes: 9ad1aefc ("md/raid10: Handle replacement devices during resync.") Cc: stable (V3.3+) Suggested-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Yufen Yu <yuyufen@huawei.com> Signed-off-by:
-
Ilan Peer authored
[ Upstream commit 191da271 ] Some APs include a non global operating class in their extended channel switch information element. In such a case, as the operating class is not known, mac80211 would decide to disconnect. However the specification states that the operating class needs to be taken from Annex E, but it does not specify from which table it should be taken, so it is valid for an AP to use a non global operating class. To avoid possibly unneeded disconnection, in such a case ignore the operating class and assume that the current band is used, and if the resulting channel and band configuration is invalid disconnect. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Sara Sharon authored
[ Upstream commit 95f3ce6a ] sta_info_alloc can be called from atomic paths (such as RX path) so we need to call pcpu_alloc with the correct gfp. Fixes: c9c5962b ("mac80211: enable collecting station statistics per-CPU") Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Signed-off-by:
-
Sara Sharon authored
[ Upstream commit d78d9ee9 ] If sta_info_alloc fails after allocating the per CPU statistics, they are not properly freed. Fixes: c9c5962b ("mac80211: enable collecting station statistics per-CPU") Signed-off-by:
-
Felix Fietkau authored
[ Upstream commit 651b9920 ] This ensures that mac80211 allocated management frames are properly aligned, which makes copying them more efficient. For instance, mt76 uses iowrite32_copy to copy beacon frames to beacon template memory on the chip. Misaligned 32-bit accesses cause CPU exceptions on MIPS and should be avoided. Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
-
David Howells authored
[ Upstream commit a16b8d0c ] Due to a check recently added to copy_to_user(), it's now not permitted to copy from slab-held data to userspace unless the slab is whitelisted. This affects rxrpc_recvmsg() when it attempts to place an RXRPC_USER_CALL_ID control message in the userspace control message buffer. A warning is generated by usercopy_warn() because the source is the copy of the user_call_ID retained in the rxrpc_call struct. Work around the issue by copying the user_call_ID to a variable on the stack and passing that to put_cmsg(). The warning generated looks like: Bad or missing usercopy whitelist? Kernel memory exposure attempt detected from SLUB object 'dmaengine-unmap-128' (offset 680, size 8)! WARNING: CPU: 0 PID: 1401 at mm/usercopy.c:81 usercopy_warn+0x7e/0xa0 ... RIP: 0010:usercopy_warn+0x7e/0xa0 ... Call Trace: __check_object_size+0x9c/0x1a0 put_cmsg+0x98/0x120 rxrpc_recvmsg+0x6fc/0x1010 [rxrpc] ? finish_wait+0x80/0x80 ___sys_recvmsg+0xf8/0x240 ? __clear_rsb+0x25/0x3d ? __clear_rsb+0x15/0x3d ? __clear_rsb+0x25/0x3d ? __clear_rsb+0x15/0x3d ? __clear_rsb+0x25/0x3d ? __clear_rsb+0x15/0x3d ? __clear_rsb+0x25/0x3d ? __clear_rsb+0x15/0x3d ? finish_task_switch+0xa6/0x2b0 ? trace_hardirqs_on_caller+0xed/0x180 ? _raw_spin_unlock_irq+0x29/0x40 ? __sys_recvmsg+0x4e/0x90 __sys_recvmsg+0x4e/0x90 do_syscall_64+0x7a/0x220 entry_SYSCALL_64_after_hwframe+0x26/0x9b Reported-by:
Jonathan Billings <jsbillings@jsbillings.org> Signed-off-by:
Kees Cook <keescook@chromium.org> Tested-by:
-
Kees Cook authored
[ Upstream commit fe9c8426 ] The tlv_len is u8, so we need to limit the size of the SDP URI. Enforce this both in the NLA policy and in the code that performs the allocation and copy, to avoid writing past the end of the allocated buffer. Fixes: d9b8d8e1 ("NFC: llcp: Service Name Lookup netlink interface") Signed-off-by:
-
Naftali Goldstein authored
[ Upstream commit 6b7a5aea ] In AP mode, when a new station associates, rs is initialized immediately upon association completion, before the phy context is updated with the association parameters, so the sta bandwidth might be wider than the phy context allows. To avoid this issue, always initialize rs with 20mhz bandwidth rate, and after authorization, when the phy context is already up-to-date, re-init rs with the correct bw. Signed-off-by:
Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by:
-
Sara Sharon authored
[ Upstream commit 5ab2ba93 ] A previous patch allowed the same PN for packets originating from the same AMSDU by copying PN only for the last packet in the series. This however is bogus since we cannot assume the last frame will be received on the same queue, and if it is received on a different ueue we will end up not incrementing the PN and possibly let the next packet to have the same PN and pass through. Change the logic instead to driver explicitly indicate for the second sub frame and on to be allowed to have the same PN as the first subframe. Indicate it to mac80211 as well for the fallback queue. Fixes: f1ae02b1 ("iwlwifi: mvm: allow same PN for de-aggregated AMSDU") Signed-off-by:
-
Thomas Falcon authored
[ Upstream commit 4b9b0f01 ] If a RX buffer is returned to the client driver with an error, free the corresponding socket buffer before continuing. Signed-off-by:
Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 8cbbf174 ] When exposing data access through debugfs, the correct debugfs_create_*() functions must be used, depending on data type. Remove all casts from data pointers passed to debugfs_create_*() functions, as such casts prevent the compiler from flagging bugs. Correct all wrong usage: - clk.rate is unsigned long, not u32, - clk.flags is u8, not u32, which exposed the successive clk.rate_offset and clk.src_offset fields. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit d3be6d2a ] For platform_suspend_ops, the finish call is too late to re-enable wake irqs and we need re-enable wake irqs on wake call instead. Otherwise noirq resume for devices has already happened. And then dev_pm_disarm_wake_irq() has already disabled the dedicated wake irqs when the interrupt triggers and the wake irq is never handled. For devices that are already in PM runtime suspended state when we enter suspend this means that a possible wake irq will never trigger. And this can lead into a situation where a device has a pending padconf wake irq, and the device will stay unresponsive to any further wake irqs. This issue can be easily reproduced by setting serial console log level to zero, letting the serial console idle, and suspend the system from an ssh terminal. Then try to wake up the system by typing to the serial console. Note that this affects only omap3 PRM interrupt as that's currently the only omap variant that does anything in omap_pm_wake(). In general, for the wake irqs to work, the interrupt must have either IRQF_NO_SUSPEND or IRQF_EARLY_RESUME set for it to trigger before dev_pm_disarm_wake_irq() disables the wake irqs. Reported-by:
Grygorii Strashko <grygorii.strashko@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by:
-
Qi Hou authored
[ Upstream commit db35340c ] When more than one GP timers are used as kernel system timers and the corresponding nodes in device-tree are marked with the same "disabled" property, then the "attr" field of the property will be initialized more than once as the property being added to sys file system via __of_add_property_sysfs(). In __of_add_property_sysfs(), the "name" field of pp->attr.attr is set directly to the return value of safe_name(), without taking care of whether it's already a valid pointer to a memory block. If it is, its old value will always be overwritten by the new one and the memory block allocated before will a "ghost", then a kmemleak happened. That the same "disabled" property being added to different nodes of device tree would cause that kind of kmemleak overhead, at least once. To fix it, allocate the property dynamically, and delete static one. Signed-off-by:
Qi Hou <qi.hou@windriver.com> Signed-off-by:
-
Anders Roxell authored
[ Upstream commit 9a606f8d ] The memfd test requires to insert the fuse module (CONFIG_FUSE_FS). Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Signed-off-by:
Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Naresh Kamboju authored
[ Upstream commit 9a379e77 ] pstore_tests and pstore_post_reboot_tests need CONFIG_PSTORE_RAM=m Signed-off-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Acked-by:
-
Dong Bo authored
[ Upstream commit 0d3e45bc ] This fixs the following comile warnings with ATA_DEBUG enabled, which detected by Linaro GCC 5.2-2015.11: drivers/ata/libata-scsi.c: In function 'ata_scsi_dump_cdb': ./include/linux/kern_levels.h:5:18: warning: format '%d' expects argument of type 'int', but argument 6 has type 'u64 {aka long long unsigned int}' [-Wformat=] tj: Patch hand-applied and description trimmed. Signed-off-by:
Dong Bo <dongbo4@huawei.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Jason Wang authored
[ Upstream commit 54e02162 ] Switch to use dividing to prevent integer overflow when size is too big to calculate allocation size properly. Reported-by:
Eric Biggers <ebiggers3@gmail.com> Fixes: 6e6e41c3 ("ptr_ring: fail early if queue occupies more than KMALLOC_MAX_SIZE") Signed-off-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Ulf Magnusson authored
[ Upstream commit 827cc2fa ] 'default N' should be 'default n', though they happen to have the same effect here, due to undefined symbols (N in this case) evaluating to n in a tristate sense. Remove the default from ARC_EMUL_UNALIGNED instead of changing it. bool and tristate symbols implicitly default to n. Discovered with the https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_ulfalizer_Kconfiglib_blob_master_examples_list-5Fundefined.py&d=DwIBAg&c=DPL6_X_6JkXFx7AXWqB0tg&r=c14YS-cH-kdhTOW89KozFhBtBJgs1zXscZojEZQ0THs&m=WxxD8ozR7QQUVzNCBksiznaisBGO_crN7PBOvAoju8s&s=1LmxsNqxwT-7wcInVpZ6Z1J27duZKSoyKxHIJclXU_M&e= script. Signed-off-by:
Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Mark Salter authored
[ Upstream commit b6dd4d83 ] The pr_debug() in gic-v3 gic_send_sgi() can trigger a circular locking warning: GICv3: CPU10: ICC_SGI1R_EL1 5000400 ====================================================== WARNING: possible circular locking dependency detected 4.15.0+ #1 Tainted: G W ------------------------------------------------------ dynamic_debug01/1873 is trying to acquire lock: ((console_sem).lock){-...}, at: [<0000000099c891ec>] down_trylock+0x20/0x4c but task is already holding lock: (&rq->lock){-.-.}, at: [<00000000842e1587>] __task_rq_lock+0x54/0xdc which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&rq->lock){-.-.}: __lock_acquire+0x3b4/0x6e0 lock_acquire+0xf4/0x2a8 _raw_spin_lock+0x4c/0x60 task_fork_fair+0x3c/0x148 sched_fork+0x10c/0x214 copy_process.isra.32.part.33+0x4e8/0x14f0 _do_fork+0xe8/0x78c kernel_thread+0x48/0x54 rest_init+0x34/0x2a4 start_kernel+0x45c/0x488 -> #1 (&p->pi_lock){-.-.}: __lock_acquire+0x3b4/0x6e0 lock_acquire+0xf4/0x2a8 _raw_spin_lock_irqsave+0x58/0x70 try_to_wake_up+0x48/0x600 wake_up_process+0x28/0x34 __up.isra.0+0x60/0x6c up+0x60/0x68 __up_console_sem+0x4c/0x7c console_unlock+0x328/0x634 vprintk_emit+0x25c/0x390 dev_vprintk_emit+0xc4/0x1fc dev_printk_emit+0x88/0xa8 __dev_printk+0x58/0x9c _dev_info+0x84/0xa8 usb_new_device+0x100/0x474 hub_port_connect+0x280/0x92c hub_event+0x740/0xa84 process_one_work+0x240/0x70c worker_thread+0x60/0x400 kthread+0x110/0x13c ret_from_fork+0x10/0x18 -> #0 ((console_sem).lock){-...}: validate_chain.isra.34+0x6e4/0xa20 __lock_acquire+0x3b4/0x6e0 lock_acquire+0xf4/0x2a8 _raw_spin_lock_irqsave+0x58/0x70 down_trylock+0x20/0x4c __down_trylock_console_sem+0x3c/0x9c console_trylock+0x20/0xb0 vprintk_emit+0x254/0x390 vprintk_default+0x58/0x90 vprintk_func+0xbc/0x164 printk+0x80/0xa0 __dynamic_pr_debug+0x84/0xac gic_raise_softirq+0x184/0x18c smp_cross_call+0xac/0x218 smp_send_reschedule+0x3c/0x48 resched_curr+0x60/0x9c check_preempt_curr+0x70/0xdc wake_up_new_task+0x310/0x470 _do_fork+0x188/0x78c SyS_clone+0x44/0x50 __sys_trace_return+0x0/0x4 other info that might help us debug this: Chain exists of: (console_sem).lock --> &p->pi_lock --> &rq->lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&rq->lock); lock(&p->pi_lock); lock(&rq->lock); lock((console_sem).lock); *** DEADLOCK *** 2 locks held by dynamic_debug01/1873: #0: (&p->pi_lock){-.-.}, at: [<000000001366df53>] wake_up_new_task+0x40/0x470 #1: (&rq->lock){-.-.}, at: [<00000000842e1587>] __task_rq_lock+0x54/0xdc stack backtrace: CPU: 10 PID: 1873 Comm: dynamic_debug01 Tainted: G W 4.15.0+ #1 Hardware name: GIGABYTE R120-T34-00/MT30-GS2-00, BIOS T48 10/02/2017 Call trace: dump_backtrace+0x0/0x188 show_stack+0x24/0x2c dump_stack+0xa4/0xe0 print_circular_bug.isra.31+0x29c/0x2b8 check_prev_add.constprop.39+0x6c8/0x6dc validate_chain.isra.34+0x6e4/0xa20 __lock_acquire+0x3b4/0x6e0 lock_acquire+0xf4/0x2a8 _raw_spin_lock_irqsave+0x58/0x70 down_trylock+0x20/0x4c __down_trylock_console_sem+0x3c/0x9c console_trylock+0x20/0xb0 vprintk_emit+0x254/0x390 vprintk_default+0x58/0x90 vprintk_func+0xbc/0x164 printk+0x80/0xa0 __dynamic_pr_debug+0x84/0xac gic_raise_softirq+0x184/0x18c smp_cross_call+0xac/0x218 smp_send_reschedule+0x3c/0x48 resched_curr+0x60/0x9c check_preempt_curr+0x70/0xdc wake_up_new_task+0x310/0x470 _do_fork+0x188/0x78c SyS_clone+0x44/0x50 __sys_trace_return+0x0/0x4 GICv3: CPU0: ICC_SGI1R_EL1 12000 This could be fixed with printk_deferred() but that might lessen its usefulness for debugging. So change it to pr_devel to keep it out of production kernels. Developers working on gic-v3 can enable it as needed in their kernels. Signed-off-by:
Mark Salter <msalter@redhat.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Michael Kelley authored
[ Upstream commit d207af2e ] for_each_cpu_wrap() was originally added in the #else half of a large "#if NR_CPUS == 1" statement, but was omitted in the #if half. This patch adds the missing #if half to prevent compile errors when NR_CPUS is 1. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Michael Kelley <mhkelley@outlook.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kys@microsoft.com Cc: martin.petersen@oracle.com Cc: mikelley@microsoft.com Fixes: c743f0a5 ("sched/fair, cpumask: Export for_each_cpu_wrap()") Link: http://lkml.kernel.org/r/SN6PR1901MB2045F087F59450507D4FCC17CBF50@SN6PR1901MB2045.namprd19.prod.outlook.comSigned-off-by:
-
Stephen Boyd authored
[ Upstream commit 95a25625 ] On some platforms there's an ITS available but it's not enabled because reading or writing the registers is denied by the firmware. In fact, reading or writing them will cause the system to reset. We could remove the node from DT in such a case, but it's better to skip nodes that are marked as "disabled" in DT so that we can describe the hardware that exists and use the status property to indicate how the firmware has configured things. Cc: Stuart Yoder <stuyoder@gmail.com> Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Will Deacon authored
[ Upstream commit 11dc1322 ] When queuing on the qspinlock, the count field for the current CPU's head node is incremented. This needn't be atomic because locking in e.g. IRQ context is balanced and so an IRQ will return with node->count as it found it. However, the compiler could in theory reorder the initialisation of node[idx] before the increment of the head node->count, causing an IRQ to overwrite the initialised node and potentially corrupt the lock state. Avoid the potential for this harmful compiler reordering by placing a barrier() between the increment of the head node->count and the subsequent node initialisation. Signed-off-by:
-
Jia Zhang authored
[ Upstream commit 595dd46e ] Commit: df04abfd ("fs/proc/kcore.c: Add bounce buffer for ktext data") ... introduced a bounce buffer to work around CONFIG_HARDENED_USERCOPY=y. However, accessing the vsyscall user page will cause an SMAP fault. Replace memcpy() with copy_from_user() to fix this bug works, but adding a common way to handle this sort of user page may be useful for future. Currently, only vsyscall page requires KCORE_USER. Signed-off-by:
Jia Zhang <zhang.jia@linux.alibaba.com> Reviewed-by:
Jiri Olsa <jolsa@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: jolsa@redhat.com Link: http://lkml.kernel.org/r/1518446694-21124-2-git-send-email-zhang.jia@linux.alibaba.comSigned-off-by:
-
Daniel Borkmann authored
[ Upstream commit 941ff6f1 ] Fix two issues in the reuseport_bpf selftests that were reported by Linaro CI: [...] + ./reuseport_bpf ---- IPv4 UDP ---- Testing EBPF mod 10... Reprograming, testing mod 5... ./reuseport_bpf: ebpf error. log: 0: (bf) r6 = r1 1: (20) r0 = *(u32 *)skb[0] 2: (97) r0 %= 10 3: (95) exit processed 4 insns : Operation not permitted + echo FAIL [...] ---- IPv4 TCP ---- Testing EBPF mod 10... ./reuseport_bpf: failed to bind send socket: Address already in use + echo FAIL [...] For the former adjust rlimit since this was the cause of failure for loading the BPF prog, and for the latter add SO_REUSEADDR. Reported-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Jesper Dangaard Brouer authored
[ Upstream commit e3d91b0c ] V3: More generic skipping of relo-section (suggested by Daniel) If clang >= 4.0.1 is missing the option '-target bpf', it will cause llc/llvm to create two ELF sections for "Exception Frames", with section names '.eh_frame' and '.rel.eh_frame'. The BPF ELF loader library libbpf fails when loading files with these sections. The other in-kernel BPF ELF loader in samples/bpf/bpf_load.c, handle this gracefully. And iproute2 loader also seems to work with these "eh" sections. The issue in libbpf is caused by bpf_object__elf_collect() skipping some sections, and later when performing relocation it will be pointing to a skipped section, as these sections cannot be found by bpf_object__find_prog_by_idx() in bpf_object__collect_reloc(). This is a general issue that also occurs for other sections, like debug sections which are also skipped and can have relo section. As suggested by Daniel. To avoid keeping state about all skipped sections, instead perform a direct qlookup in the ELF object. Lookup the section that the relo-section points to and check if it contains executable machine instructions (denoted by the sh_flags SHF_EXECINSTR). Use this check to also skip irrelevant relo-sections. Note, for samples/bpf/ the '-target bpf' parameter to clang cannot be used due to incompatibility with asm embedded headers, that some of the samples include. This is explained in more details by Yonghong Song in bpf_devel_QA. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
