- 29 Aug, 2005 40 commits
-
-
Michael Chan authored
This fixes an rtnl deadlock problem when flush_scheduled_work() is called from bnx2_close(). In rare cases, linkwatch_event() may be on the workqueue from a previous close of a different device and it will try to get the rtnl lock which is already held by dev_close(). The fix is to set a flag if we are in the reset task which is run from the workqueue. bnx2_close() will loop until the flag is cleared. As suggested by Jeff Garzik, the loop is changed to call msleep(1) instead of yield() in the original patch. flush_scheduled_work() is also moved to bnx2_remove_one() before the netdev is freed. Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Robert Olsson authored
* Removes RW-lock * Proteced read functions uses rcu_dereference proteced with rcu_read_lock() * writing of procted pointer w. rcu_assigen_pointer * Insert/Replace atomic list_replace_rcu * A BUG_ON condition removed.in trie_rebalance With help from Paul E. McKenney. Signed-off-by:
Robert Olsson <Robert.Olsson@data.slu.se> Signed-off-by:
Stephen Hemminger <shemminger@osdl.org> Signed-off-by:
-
Robert Olsson authored
* RCU versions of hlist_***_rcu * fib_alias partial rcu port just whats needed now. Signed-off-by:
-
Ralf Baechle authored
With ip_rcv nowhere outside the IP stack being used anymore it's EXPORT_SYMBOL is not needed any longer either. Signed-off-by:
Ralf Baechle DL5RB <ralf@linux-mips.org> Signed-off-by:
-
Ralf Baechle authored
All these are claiming to include <net/ip.h> to get ip_rcv() but in fact don't need the header at all, so away with the inclusion. Signed-off-by:
-
Ralf Baechle authored
Get rid of the calls to ip_rcv and arp_rcv which were layering violations anyway. With those being replaced by netif_rx, less parts of AX.25 and relatives depend on INET support actually being enabled. This also will make PF_PACKET sockets work for IP and ARP packets received over AX.25 and for IP packets over NET/ROM. Signed-off-by:
-
Stephen Hemminger authored
This is a redo of earlier cleanup stuff: * replace DBG() macro with pr_debug() * get rid of duplicate extern's that are already in fib_lookup.h * use BUG_ON and WARN_ON * don't use BUG checks for null pointers where next statement would get a fault anyway * remove debug printout when rebalance causes deep tree * remove trailing blanks Signed-off-by:
Robert Olsson <robert.olsson@its.uu.se> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Tested with a patched netcat, no horror stories so far 8) Signed-off-by:
Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
Arnaldo Carvalho de Melo authored
And also hc_tx and hc_rx get_info functions for the CCIDs to fill in information that is specific to them. For now reusing struct tcp_info, later I'll try to figure out a better solution, for now its really nice to get this kind of info: [root@qemu ~]# ./ss -danemi State Recv-Q Send-Q Local Addr:Port Peer Addr:Port LISTEN 0 0 *:5001 *:* ino:628 sk:c1340040 mem:(r0,w0,f0,t0) cwnd:0 ssthresh:0 ESTAB 0 0 172.20.0.2:5001 172.20.0.1:32785 ino:629 sk:c13409a0 mem:(r0,w0,f0,t0) ts rto:1000 rtt:0.004/0 cwnd:0 ssthresh:0 rcv_rtt:61.377 This, for instance, shows that we're not congestion controlling ACKs, as the above output is in the ttcp receiving host, and ttcp is a one way app, i.e. the received never calls sendmsg, so ccid_hc_tx_send_packet is never called, so the TX half connection stays in TFRC_SSTATE_NO_SENT state and hctx_rtt is never calculated, stays with the value set in ccid3_hc_tx_init, 4us, as show above in milliseconds (0.004ms), upcoming patches will fix this. rcv_rtt seems sane tho, matching ping results :-) Signed-off-by: -
Arnaldo Carvalho de Melo authored
Using TIMESTAMP_ECHO and ELAPSED_TIME options received. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
And don't insert a TIMESTAMP option in all packets, leave the decision to the CCIDs. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Just like kfree, etc it will just not call the CCID exit routines when the private data area is set to NULL. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
Arnaldo Carvalho de Melo authored
So that we retransmit CLOSE/CLOSEREQ packets till they elicit an answer or we hit a timeout. Most of the machinery uses TCP approaches, this code has to be polished & audited, but this is better than we had before. Signed-off-by:
-
David S. Miller authored
Signed-off-by: -
Patrick McHardy authored
Originally written by Henrik Nordstrom <hno@marasystems.com>, taken from netfilter patch-o-matic and added ip6_tables support. Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Patrick McHardy authored
Originally written by Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>, taken from netfilter patch-o-matic and fixed up to work with current kernels. Signed-off-by:
-
Pablo Neira Ayuso authored
Signed-off-by:
Pablo Neira Ayuso <pablo@eurodev.net> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
Arnaldo Carvalho de Melo authored
This is from a first audit, more eyeballs are more than welcome. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
Arnaldo Carvalho de Melo authored
CCID3 keeps this variable in usecs, inet_connection_socks in jiffies, so to avoid Mars orbiter losses lets reintroduce ccid3hctx_t_rto 8) Signed-off-by:
-
Thomas Graf authored
Signed-off-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
Thomas Graf authored
Signed-off-by:
-
Thomas Graf authored
Signed-off-by:
-
Thomas Graf authored
Signed-off-by:
-
Thomas Graf authored
Signed-off-by:
-
Thomas Graf authored
Signed-off-by:
-
Thomas Graf authored
Signed-off-by:
-
Jon Wetzel authored
This patch adds a new field to net device to hold the permanent hardware address, and adds a new generic ethtool_op function to get that address. Signed-off-by:
Jon Wetzel <jon_wetzel@dell.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Adrian Bunk authored
Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Ian McDonald authored
This changes timestamp, timestamp echo, and elapsed time to use units of 10 usecs as per DCCP spec. This has been tested to verify that times are correct. Also fixed up length and used hton/ntoh more. Still to add in later patches: - actually use elapsed time to adjust RTT (commented out as was prior to this patch) - send options at times more closely following the spec (content is now correct) Signed-off-by:
Ian McDonald <iam4@cs.waikato.ac.nz> Signed-off-by:
-
David S. Miller authored
Fix conflict with symbol of same name in global namespace. Signed-off-by: -
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
Ian McDonald authored
The elapsed time can be two bytes or four bytes only. Signed-off-by:
-
