- 12 May, 2016 2 commits
-
-
Gavin Shan authored
The function eeh_pe_reset_and_recover() is used to recover EEH error when the passthrough device are transferred to guest and backwards, meaning the device's driver is vfio-pci or none. When the driver is vfio-pci that provides error_detected() error handler only, the handler simply stops the guest and it's not expected behaviour. On the other hand, no error handlers will be called if we don't have a bound driver. This ignores the error handler in eeh_pe_reset_and_recover() that reports the error to device driver to avoid the exceptional behaviour. Fixes: 5cfb20b9 ("powerpc/eeh: Emulate EEH recovery for VFIO devices") Cc: stable@vger.kernel.org #v3.18+ Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by:
Russell Currey <ruscur@russell.cc> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
This reverts commit c8ceacc2. Gavin says: I missed the fact that it affects the PCI passthrou path as reported by Alexey: When passing GPU (0003:01:00.0) which seats behind the root port, the reset request is routed to skiboot in original code. In skiboot, the link bouncing events are masked during the reset. So we don't see EEH (freeze all) error even link bouncing happens. With the changes included, the reset is done by kernel and the link bouncing events aren't masked by altering content of PHB3 (or P7IOC) specific hardware registers which are invisible to kernel (skiboot hides the hardware specific). It means the link bouncing is seen by the root port and it causes a EEH (freeze all) error. The PCI passthrough on GPU device cannot work. Requested-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Requested-by:
-
- 11 May, 2016 38 commits
-
-
Alexey Kardashevskiy authored
IBM POWER8 NVlink systems come with Tesla K40-ish GPUs each of which also has a couple of fast speed links (NVLink). The interface to links is exposed as an emulated PCI bridge which is included into the same IOMMU group as the corresponding GPU. In the kernel, NPUs get a separate PHB of the PNV_PHB_NPU type and a PE which behave pretty much as the standard IODA2 PHB except NPU PHB has just a single TVE in the hardware which means it can have either 32bit window or 64bit window or DMA bypass but never two of these. In order to make these links work when GPU is passed to the guest, these bridges need to be passed as well; otherwise performance will degrade. This implements and exports API to manage NPU state in regard to VFIO; it replicates iommu_table_group_ops. This defines a new pnv_pci_ioda2_npu_ops which is assigned to the IODA2 bridge if there are NPUs for a GPU on the bridge. The new callbacks call the default IODA2 callbacks plus new NPU API. This adds a gpe_table_group_to_npe() helper to find NPU PE for the IODA2 table_group, it is not expected to fail as the helper is only called from the pnv_pci_ioda2_npu_ops. This does not define NPU-specific .release_ownership() so after VFIO is finished, DMA on NPU is disabled which is ok as the nvidia driver sets DMA mask when probing which enable 32 or 64bit DMA on NPU. This adds a pnv_pci_npu_setup_iommu() helper which adds NPUs to the GPU group if any found. The helper uses helpers to look for the "ibm,gpu" property in the device tree which is a phandle of the corresponding GPU. This adds an additional loop over PEs in pnv_ioda_setup_dma() as the main loop skips NPU PEs as they do not have 32bit DMA segments. As pnv_npu_set_window() and pnv_npu_unset_window() are started being used by the new IODA2-NPU IOMMU group, this makes the helpers public and adds the DMA window number parameter. Signed-off-by:
Alistair Popple <alistair@popple.id.au> [mpe: Add pnv_pci_ioda_setup_iommu_api() to fix build with IOMMU_API=n] Signed-off-by:
-
Alexey Kardashevskiy authored
The pnv_ioda_pe struct keeps an array of peers. At the moment it is only used to link GPU and NPU for 2 purposes: 1. Access NPU quickly when configuring DMA for GPU - this was addressed in the previos patch by removing use of it as DMA setup is not what the kernel would constantly do. 2. Invalidate TCE cache for NPU when it is invalidated for GPU. GPU and NPU are in different PE. There is already a mechanism to attach multiple iommu_table_group to the same iommu_table (used for VFIO), we can reuse it here so does this patch. This gets rid of peers[] array and PNV_IODA_PE_PEER flag as they are not needed anymore. While we are here, add TCE cache invalidation after enabling bypass. Signed-off-by:
-
Alexey Kardashevskiy authored
The upcoming NVLink passthrough support will require NPU code to cope with two DMA windows. This adds a pnv_npu_set_window() helper which programs 32bit window to the hardware. This also adds multilevel TCE support. This adds a pnv_npu_unset_window() helper which removes the DMA window from the hardware. This does not make difference now as the caller - pnv_npu_dma_set_bypass() - enables bypass in the hardware but the next patch will use it to manage TCE table lists for TCE Kill handling. Signed-off-by:
-
Alexey Kardashevskiy authored
This exports debugging helper pe_level_printk() and corresponding macroses so they can be used in npu-dma.c. Signed-off-by:
-
Alexey Kardashevskiy authored
NPU devices are emulated in firmware and mainly used for NPU NVLink training; one NPU device is per a hardware link. Their DMA/TCE setup must match the GPU which is connected via PCIe and NVLink so any changes to the DMA/TCE setup on the GPU PCIe device need to be propagated to the NVLink device as this is what device drivers expect and it doesn't make much sense to do anything else. This makes NPU DMA setup explicit. pnv_npu_ioda_controller_ops::pnv_npu_dma_set_mask is moved to pci-ioda, made static and prints warning as dma_set_mask() should never be called on this function as in any case it will not configure GPU; so we make this explicit. Instead of using PNV_IODA_PE_PEER and peers[] (which the next patch will remove), we test every PCI device if there are corresponding NVLink devices. If there are any, we propagate bypass mode to just found NPU devices by calling the setup helper directly (which takes @bypass) and avoid guessing (i.e. calculating from DMA mask) whether we need bypass or not on NPU devices. Since DMA setup happens in very rare occasion, this will not slow down booting or VFIO start/stop much. This renames pnv_npu_disable_bypass to pnv_npu_dma_set_32 to make it more clear what the function really does which is programming 32bit table address to the TVT ("disabling bypass" means writing zeroes to the TVT). This removes pnv_npu_dma_set_bypass() from pnv_npu_ioda_fixup() as the DMA configuration on NPU does not matter until dma_set_mask() is called on GPU and that will do the NPU DMA configuration. This removes phb->dma_dev_setup initialization for NPU as pnv_pci_ioda_dma_dev_setup is no-op for it anyway. This stops using npe->tce_bypass_base as it never changes and values other than zero are not supported. Signed-off-by:David Gibson <david@gibson.dropbear.id.au> Reviewed-by:
-
Alexey Kardashevskiy authored
This uses the page size from iommu_table instead of hard-coded 4K. This should cause no change in behavior. While we are here, move bits around to prepare for further rework which will define and use iommu_table_group_ops. Signed-off-by:
-
Alexey Kardashevskiy authored
NPU PHB TCE Kill register is exactly the same as in the rest of POWER8 so let's reuse the existing code for NPU. The only bit missing is a helper to reset the entire TCE cache so this moves such a helper from NPU code and renames it. Since pnv_npu_tce_invalidate() does really invalidate the entire cache, this uses pnv_pci_ioda2_tce_invalidate_entire() directly for NPU. This adds an explicit comment for workaround for invalidating NPU TCE cache. Signed-off-by:
-
Alexey Kardashevskiy authored
This replaces magic constants for TCE Kill IODA2 register with macros. Signed-off-by:
-
Alexey Kardashevskiy authored
As in fact pnv_pci_ioda2_tce_invalidate_entire() invalidates TCEs for the specific PE rather than the entire cache, rename it to pnv_pci_ioda2_tce_invalidate_pe(). In later patches we will add a proper pnv_pci_ioda2_tce_invalidate_entire(). Signed-off-by:
-
Alexey Kardashevskiy authored
We are going to have multiple different types of PHB on the same system with POWER8 + NVLink and PHBs will have different IOMMU ops. However we only really care about one callback - create_table - so we can relax the compatibility check here. Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Gavin Shan authored
The function pnv_pci_reset_secondary_bus() is called like below. It's impossible for call the function on root bus. So it's safe to remove the root bus case in the function. No functional changes introduced. pci_parent_bus_reset() / pci_bus_reset() / pci_try_reset_bus() pci_reset_bridge_secondary_bus() pcibios_reset_secondary_bus() pnv_pci_reset_secondary_bus() Signed-off-by:
Daniel Axtens <dja@axtens.net> Reviewed-by:
-
Gavin Shan authored
This drops unnecessary nested if statements in pnv_eeh_reset() to improve the code readability. After the changes, the unused local variable "ret" is dropped as well. No logical changes introduced. Signed-off-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Reviewed-by:
-
Gavin Shan authored
In hotplug case, function pci_add_pci_devices() is called to rescan the specified PCI bus, which might not have any child devices. Access to the PCI bus's child device node will cause kernel crash without exception. This adds one more check to skip scanning PCI bus that doesn't have any subordinate devices from device-tree, in order to avoid kernel crash. Signed-off-by:
-
Gavin Shan authored
This renames traverse_pci_devices() to pci_traverse_device_nodes(). The function traverses all subordinate device nodes of the specified one. Also, below cleanup applied to the function. No logical changes introduced. * Rename "pre" to "fn". * Avoid assignment in if condition reported from checkpatch.pl. Signed-off-by:
-
Gavin Shan authored
This implements and exports pci_remove_device_node_info(). It's used to remove the pdn (struct pci_dn) for the indicated device node. The function is going to be used by PowerNV PCI hotplug driver. Signed-off-by:
-
Gavin Shan authored
This renames update_dn_pci_info() to pci_add_device_node_info() with corresponding adjustment on the parameter type and exports it. The function is used to create pdn (struct pci_dn) for the indicated device node. Another function add_pdn(), almost wrapper of pci_add_device_node_info(), to be used in traverse_pci_devices(). No logical changes introduced. Signed-off-by:
-
Gavin Shan authored
This moves pci_find_bus_by_node() from arch/powerpc/platforms/ pseries/pci_dlpar.c to arch/powerpc/kernel/pci-hotplug.c so that the function can be used by pSeries and PowerNV platform at the same time. Also, below cleanup applied. No functional changes introduced. * Remove variable "busdn" in find_bus_among_children() * Use PCI_DN() to convert device node to pci_dn Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by:
-
Gavin Shan authored
This renames pcibios_find_pci_bus() to pci_find_bus_by_node() to avoid conflicts with those PCI subsystem weak function names, which have prefix "pcibios". No logical changes introduced. Signed-off-by:
-
Gavin Shan authored
This renames pcibios_{add,remove}_pci_devices() to avoid conflicts with names of the weak functions in PCI subsystem, which have the prefix "pcibios". No logical changes introduced. Signed-off-by: -
Gavin Shan authored
In current implementation, the PEs that are allocated or picked from the reserved list are identified by PE number. The PE instance has to be picked according to the PE number eventually. We have same issue when PE is released. For pnv_ioda_pick_m64_pe() and pnv_ioda_alloc_pe(), this returns PE instance so that pnv_ioda_setup_bus_PE() can use the allocated or reserved PE instance directly. Also, pnv_ioda_setup_bus_PE() returns the reserved/allocated PE instance to be used in subsequent patches. On the other hand, pnv_ioda_free_pe() uses PE instance (not number) as its argument. No logical changes introduced. Signed-off-by:
-
Gavin Shan authored
In current implementation, the DMA32 segments required by one specific PE isn't calculated with the information hold in the PE independently. It conflicts with the PCI hotplug design: PE centralized, meaning the PE's DMA32 segments should be calculated from the information hold in the PE independently. This introduces an array (@dma32_segmap) for every PHB to track the DMA32 segmeng usage. Besides, this moves the logic calculating PE's consumed DMA32 segments to pnv_pci_ioda1_setup_dma_pe() so that PE's DMA32 segments are calculated/allocated from the information hold in the PE (DMA32 weight). Also the logic is improved: we try to allocate as much DMA32 segments as we can. It's acceptable that number of DMA32 segments less than the expected number are allocated. Signed-off-by:
-
Gavin Shan authored
PEs are put into PHB DMA32 list (phb->ioda.pe_dma_list) according to their DMA32 weight. The PEs on the list are iterated to setup their TCE32 tables at system booting time. The list is used for once at boot time and no need to keep it. This moves the logic calculating DMA32 weight of PHB and PE to pnv_ioda_setup_dma() to drop PHB's DMA32 list. Also, every PE traces the consumed DMA32 segment by @tce32_seg and @tce32_segcount are useless and they're removed. Signed-off-by:
-
Gavin Shan authored
Currently, there is one macro (TCE32_TABLE_SIZE) representing the TCE table size for one DMA32 segment. The constant representing the DMA32 segment size (1 << 28) is still used in the code. This defines PNV_IODA1_DMA32_SEGSIZE representing one DMA32 segment size. the TCE table size can be calcualted when the page has fixed 4KB size. So all the related calculation depends on one macro (PNV_IODA1_DMA32_SEGSIZE). No logical changes introduced. Signed-off-by:
-
Gavin Shan authored
This renames pnv_pci_ioda_setup_dma_pe() to pnv_pci_ioda1_setup_dma_pe() as it's the counter-part of IODA2's pnv_pci_ioda2_setup_dma_pe(). No logical changes introduced. Signed-off-by:
-
Gavin Shan authored
This enables M64 window on P7IOC, which has been enabled on PHB3. Different from PHB3 where 16 M64 BARs are supported and each of them can be owned by one particular PE# exclusively or divided evenly to 256 segments, every P7IOC PHB has 16 M64 BARs and each of them are divided to 8 segments. So every P7IOC PHB supports 128 M64 segments in total. P7IOC has M64DT, which helps mapping one particular M64 segment# to arbitrary PE#. PHB3 doesn't have M64DT, indicating that one M64 segment can only be pinned to the fixed PE#. In order to unified M64 support M64 on P7IOC and PHB3, we just provide 128 M64 segments on every P7IOC PHB and each of them is pinned to the fixed PE# by bypassing the function of M64DT. In turn, we just need different phb->init_m64() for P7IOC and PHB3 and maps M64 segment in pnv_ioda_reserve_m64_pe() for P7IOC, most of the code are shared by them. Signed-off-by:
-
Gavin Shan authored
This renames those functions picking PE number based on consumed M64 segments, mapping M64 segments to PEs as those functions are going to be shared by IODA1/IODA2 in next patch. No logical changes introduced. Signed-off-by:
-
Gavin Shan authored
When unplugging PCI devices, their parent PEs might be offline. The consumed M64 resource by the PEs should be released at that time. As we track M32 segment consumption, this introduces an array to the PHB to track the mapping between M64 segment and PE number. Note: M64 mapping isn't covered by pnv_ioda_setup_pe_seg() as IODA2 doesn't support the mapping explicitly while it's supported on IODA1. Until now, no M64 is supported on IODA1 in software. Signed-off-by:
-
Gavin Shan authored
Currently, the IO and M32 segments are mapped to the corresponding PE based on the windows of the parent bridge of PE's primary bus. It's not going to work when the windows of root port or upstream port of the PCIe switch behind root port are extended to PHB's apertures in order to support hotplug in subsequent patch. This fixes the issue by mapping IO and M32 segments based on the resources of the PCI devices included in the PE, instead of the windows of the parent bridge of the PE's primary bus. Signed-off-by:
-
Gavin Shan authored
pnv_ioda_setup_pe_seg() associates the IO and M32 segments with the owner PE. The code mapping segments should be fixed and immune from logic changes introduced to pnv_ioda_setup_pe_seg(). This moves the code mapping segments to helper pnv_ioda_setup_pe_res(). The data type for @rc is changed to "int64_t". Also, argument @hose is removed from pnv_ioda_setup_pe() as it can be got from @pe. No functional changes introduced. Signed-off-by:
-
Gavin Shan authored
There are two arrays for IO and M32 segment maps on every PHB. The index of the arrays are segment number and the value stored in the corresponding element is PE number, indicating the segment is assigned to the PE. Initially, all elements in those two arrays are zeroes, meaning all segments are assigned to PE#0. It's wrong. This fixes the initial values in the elements of those two arrays to IODA_INVALID_PE, meaning all segments aren't assigned to any PE. Signed-off-by:
-
Gavin Shan authored
This changes the data type of PE number from "int" to "unsigned int" in order to match the fact PE number is never negative: * The number of PE to which the specified PCI device is attached. * The PE number map for SRIOV VFs. * The returned PE number from pnv_ioda_alloc_pe(). * The returned PE number from pnv_ioda2_pick_m64_pe(). Suggested-by:
-
Gavin Shan authored
This renames the fields related to PE number in "struct pnv_phb" for better reflecting of their usages as Alexey suggested. No logical changes introduced. Signed-off-by:
-
Gavin Shan authored
This moves those fields in struct pnv_phb that are related to PE allocation around. No logical change. Signed-off-by:
-
Gavin Shan authored
The last usage of pnv_phb::bdfn_to_pe() was removed in ff57b454 ("powerpc/eeh: Do probe on pci_dn"), so drop it. Signed-off-by:
-
Gavin Shan authored
This cleans up on below data struct instances to use tab instead of space indent of statement to avoid complains from scripts/checkpatch.pl. No logical changes introduced. @pnv_pci_ioda_controller_ops @pnv_npu_ioda_controller_ops Signed-off-by:
-
Gavin Shan authored
Each PHB has one instance of "struct pci_controller_ops" that includes various callbacks called by PCI subsystem. In the definition of this struct, some callbacks have explicit names for its arguments, but the left don't have. This adds all explicit names of the arguments to the callbacks in "struct pci_controller_ops" so that the code looks consistent. Also, argument name @dev is replaced by @pdev as the later one is the preferred name for PCI device. Signed-off-by:
-
Rashmica Gupta authored
Testing that the TM SPRs are behaving the way they should. Uses more threads than cpus to see if the following register values persist with context switching: - the FS (failure summary) flag in TEXASR - TFIAR and TFHAR Signed-off-by:
Rashmica Gupta <rashmicy@gmail.com> Signed-off-by:
-
Rashmica Gupta authored
If the transaction is aborted, the TAR should be rolled back to the checkpointed value before the transaction began. The value written to the TAR when the transaction is suspended should only remain there if the transaction completes successfully. Signed-off-by:
-
