Eliminates duplicate code in sata_nv, sata_sis, and sata_via.

Prepare for use of new generic iomap API.

Driver should be using LIBATA_MAX_PRD not ATA_MAX_PRD,
due to iommu layer splitting.

It seems that most architectures already include linux/device.h in their
own asm/dma-mapping.h.  Most but not all, and some drivers fail to
compile on those architectures that don't.  Since everybody needs it
let's include device.h from one place only and fix compilation for
everybody.

There's a double-free in the isofs filesystem.

Invalidate this pointer so it doesn't get freed twice.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The follow patch special cases the NR_CPUS <= BITS_PER_COMPAT_LONG case.
Without this patch, a 32bit task would be required to have a 64bit
cpumask no matter what value of NR_CPUS are used.

With this patch a compat long sized bitmask is allowed if NR_CPUS is
small enough to fit within it.

Of course applications should be using the glibc wrappers that use an
opaque cpu_mask_t type, but there could be older applications using the
syscalls directly.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Remove the set_fs hack in the compat affinity calls. Create
sched_getaffinity and sched_setaffinity helper functions that both the
native and compat affinity syscalls use.

Also make the compat functions match what the native ones are doing now,
setaffinity calls succeed no matter what length the bitmask is, but
getaffinity calls must pass in bitmasks at least as long as the kernel
type.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into agluck-lia64.sc.intel.com:/data/home/aegl/BK/linux-ia64-release-2.6.9

into agluck-lia64.sc.intel.com:/data/home/aegl/BK/linux-ia64-release-2.6.9

Thanks to David for his help in tracking it down.

  compile the kernel with sibling call optimization
  turned off. There is a problem with all functions
  using the optimization and the asmlinkage attribute.
  The compiler should not perform the optimization on
  these functions because it cannot preserve the syscall
  parameters in the callee. This caused SIGSEGV on programs
  traced with PTRACE_SYSCALL, for instance.
signed-off-by: stephane eranian <eranian@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Jeff wants to use this to clean up SATA and some network drivers.

Sigh, Thomas Gleixner pointed out that his
sis5518 fix didn't need forward porting.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch kills the bogus radeonfb_read/write routines. In order to do so,
it adds a new member to fb_info, along with screen_base, which is screen_size,
indicating the mapped area. The default fb_read/write will now use that instead
of fix->smem_len if it is non-0, and radeonfb now sets it to the mapped size
of the framebuffer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This is a resend of a patch sent in July and that got lost somewhat,
the "VSCR" register wasn't restored properly from the context on
load_up_altivec (typo), please apply the fix:
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into kernel.bkbits.net:/home/davem/net-2.6

into kernel.bkbits.net:/home/davem/sparc-2.6

Signed-off-by: David S. Miller <davem@davemloft.net>

Only send NETDEV_CHANGEADDR notifies for address and broadcast changes.
Notify is also sent out if only one of the 2 changes is successful.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

Am travelling, but this passed simple tests here.  If this isn't going
in, the current seqfile stuff should be ripped out; it's a mess.

/proc/net/ip_conntrack was changed over to seq_file.  However,
seq_file isn't a great fit (a linked list which is changing is not a
good candidate for seq file), and the conversion was done badly.

1) Don't do allocation: simply hand the pointer head of the correct chain.
2) Actually output the original tuple.
3) Lock only when actually traversing hash chain.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

With improvements by Francois Romieu and David
S. Miller.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

Noticed by Eric Lemoine.
Signed-off-by: David S. Miller <davem@davemloft.net>

	Appended is a 2nd version that uses nf_reset_debug.

- do not use skb_checksum_help in input path as ipvs can handle
incoming CHECKSUM_HW packets

- do not use skb_checksum_help in forwarding path

- claim that checksum is valid (CHECKSUM_NONE) when entering output
path for out->in packets

- do not reset/destroy the nfct in IP_VS_XMIT, the intention is to
reset the debugging field just to avoid log floods from nf_debug_ip_*
functions, it is known that the ipvs packets traverse other
hooks, eg. LOCAL_IN->LOCAL_OUT. Use nf_reset_debug instead of nf_reset.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>

Old debugging code we no longer need.
Signed-off-by: David S. Miller <davem@davemloft.net>

Noticed by Herbert Xu.
Signed-off-by: David S. Miller <davem@davemloft.net>

This fixes panic in rt6_device_match().

Well, rt->rt6i_idev is always set if it is dynamically allocated.
However, when we hit ip6_null_entry here, its rt6i_idev is NULL.
This patch is minimum fix to avoid the oops for now.
Signed-off-by: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

From: Thomas Gleixner <tglx@linutronix.de>

1. If the fake 5513 id bit is not set by the BIOS we must have the 5518
id in the device table.

2. If the register remapping is not set by the BIOS then the enable bit
check in ide_pci_setup_ports will fail. It's safe to switch to the
remapping mode here. Keeping the not remapped mode would need quite big
changes AFAICS.

Forward ported to 2.6 by me.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This driver caused a _lot_ of warnings due to tons
of explicit casts to "uclong". Making all the types
sane not only removed the warnings, but got rid of
a lot of silly casting, since the types are now much
more natural to what the driver wanted to do in the
first place.