- 14 Aug, 2018 14 commits
-
-
Fuyun Liang authored
Function call of phy_connect_direct will reinitialize phydev. Some information like advertising will be lost. Phy_connect_direct only needs to be called once. And driver can run well. This patch adds some functions to ensure that phy_connect_direct is called only once to solve the information of phydev lost problem occurring when we stop the net and open it again. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support Signed-off-by:
Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xi Wang authored
According to the functional specification of hardware, the first descriptor of response from command 'lookup vlan talbe' is not valid. Currently, the first descriptor is parsed as normal value, which will cause an expected error. This patch fixes this problem by skipping the first descriptor. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by:
Xi Wang <wangxi11@huawei.com> Signed-off-by:
-
Peng Li authored
This patch adds support for serdes loopback selftest in hns3 driver. Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
-
Arnd Bergmann authored
The bnxt_coredump_record structure is very long, causing a warning about possible stack overflow on 32-bit architectures: drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c: In function 'bnxt_get_coredump': drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:2989:1: error: the frame size of 1188 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] I could not see any reason to operate on an on-stack copy of the structure before copying it back into the caller-provided buffer, which also simplifies the code here. Fixes: 6c5657d0 ("bnxt_en: Add support for ethtool get dump.") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
The only remaining caller of this function is inside of an #ifdef after another caller got removed. This causes a harmless warning in some configurations: drivers/net/ethernet/broadcom/bcmsysport.c:1068:13: error: 'bcm_sysport_resume_from_wol' defined but not used [-Werror=unused-function] Removing the #ifdef around the PM functions simplifies the code and avoids the problem but letting the compiler drop the unused functions silently. Fixes: 9e85e227 ("net: systemport: Do not re-configure upon WoL interrupt") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
The newly added suspend/resume functions cause a build warning when CONFIG_PM is disabled: drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c:324:12: error: 'stmmac_pci_resume' defined but not used [-Werror=unused-function] drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c:306:12: error: 'stmmac_pci_suspend' defined but not used [-Werror=unused-function] Mark them as __maybe_unused so gcc can drop them silently. Fixes: b7d0f08e ("net: stmmac: Fix WoL for PCI-based setups") Signed-off-by:
-
Arnd Bergmann authored
Removing one of the callers of pppol2tp_session_get_sock caused a harmless warning in some configurations: net/l2tp/l2tp_ppp.c:142:21: 'pppol2tp_session_get_sock' defined but not used [-Wunused-function] Rather than adding another #ifdef here, using a proper IS_ENABLED() check makes the code more readable and avoids those warnings while letting the compiler figure out for itself which code is needed. This adds one pointer for the unused show() callback in struct l2tp_session, but that seems harmless. Fixes: b0e29063 ("l2tp: remove pppol2tp_session_ioctl()") Signed-off-by:
-
Arnd Bergmann authored
The utsname()->nodename string may be 64 bytes long, and it gets copied without the trailing nul byte into the shorter record->system_name, as gcc now warns: In file included from include/linux/bitmap.h:9, from include/linux/ethtool.h:16, from drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:13: In function 'strncpy', inlined from 'bnxt_fill_coredump_record' at drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:2863:2: include/linux/string.h:254:9: error: '__builtin_strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation] Using strlcpy() at least avoids overflowing the destination buffer and adds proper nul-termination. It may still truncate long names though, which probably can't be solved here. Fixes: 6c5657d0 ("bnxt_en: Add support for ethtool get dump.") Signed-off-by:Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Arnd Bergmann authored
Building without CONFIG_PTP_1588_CLOCK results in multiple failures, this was obviously not well tested: drivers/net/ethernet/microchip/lan743x_ptp.c: In function 'lan743x_ptp_isr': drivers/net/ethernet/microchip/lan743x_ptp.c:781:28: error: 'struct lan743x_ptp' has no member named 'ptp_clock'; did you mean 'tx_ts_lock'? ptp_schedule_worker(ptp->ptp_clock, 0); ^~~~~~~~~ tx_ts_lock drivers/net/ethernet/microchip/lan743x_ptp.c: In function 'lan743x_ptp_open': drivers/net/ethernet/microchip/lan743x_ptp.c:879:6: error: unused variable 'ret' [-Werror=unused-variable] int ret = -ENODEV; ^~~ At top level: drivers/net/ethernet/microchip/lan743x_ptp.c:63:13: error: 'lan743x_ptp_tx_ts_enqueue_ts' defined but not used [-Werror=unused-function] static void lan743x_ptp_tx_ts_enqueue_ts(struct lan743x_adapter *adapter, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors drivers/net/ethernet/microchip/lan743x_ethtool.c: In function 'lan743x_ethtool_get_ts_info': drivers/net/ethernet/microchip/lan743x_ethtool.c:558:19: error: 'struct lan743x_ptp' has no member named 'ptp_clock'; did you mean 'tx_ts_lock'? Those #ifdef checks are hard to get right, replace them all with IS_ENABLED() checks that leave the same code visible to the compiler but let it optimize out the unused bits based on the configuration. Fixes: 07624df1 ("lan743x: lan743x: Add PTP support") Signed-off-by: -
Arnd Bergmann authored
lan743x now fails to build when CONFIG_CRC16 is disabled: drivers/net/ethernet/microchip/lan743x_main.o: In function crc16' Force it on like all other users do. Fixes: 4d94282a ("lan743x: Add power management support") Signed-off-by:
-
David S. Miller authored
Hangbin Liu says: ==================== net_sched: Fix two tc_index filter init issues These two patches fix two tc_index filter init issues. The first one fixes missing exts info in new filter, which will cause NULL pointer dereference when delete tcindex filter. The second one fixes missing res info when create new filter, which will make filter unbind failed. ==================== Signed-off-by: -
Hangbin Liu authored
Li Shuang reported the following warn: [ 733.484610] WARNING: CPU: 6 PID: 21123 at net/sched/sch_cbq.c:1418 cbq_destroy_class+0x5d/0x70 [sch_cbq] [ 733.495190] Modules linked in: sch_cbq cls_tcindex sch_dsmark rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat l [ 733.574155] syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm igb ixgbe ahci libahci i2c_algo_bit libata i40e i2c_core dca mdio megaraid_sas dm_mirror dm_region_hash dm_log dm_mod [ 733.592500] CPU: 6 PID: 21123 Comm: tc Not tainted 4.18.0-rc8.latest+ #131 [ 733.600169] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.1.5 04/11/2016 [ 733.608518] RIP: 0010:cbq_destroy_class+0x5d/0x70 [sch_cbq] [ 733.614734] Code: e7 d9 d2 48 8b 7b 48 e8 61 05 da d2 48 8d bb f8 00 00 00 e8 75 ae d5 d2 48 39 eb 74 0a 48 89 df 5b 5d e9 16 6c 94 d2 5b 5d c3 <0f> 0b eb b6 0f 1f 44 00 00 66 2e 0f 1f 84 [ 733.635798] RSP: 0018:ffffbfbb066bb9d8 EFLAGS: 00010202 [ 733.641627] RAX: 0000000000000001 RBX: ffff9cdd17392800 RCX: 000000008010000f [ 733.649588] RDX: ffff9cdd1df547e0 RSI: ffff9cdd17392800 RDI: ffff9cdd0f84c800 [ 733.657547] RBP: ffff9cdd0f84c800 R08: 0000000000000001 R09: 0000000000000000 [ 733.665508] R10: ffff9cdd0f84d000 R11: 0000000000000001 R12: 0000000000000001 [ 733.673469] R13: 0000000000000000 R14: 0000000000000001 R15: ffff9cdd17392200 [ 733.681430] FS: 00007f911890a740(0000) GS:ffff9cdd1f8c0000(0000) knlGS:0000000000000000 [ 733.690456] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 733.696864] CR2: 0000000000b5544c CR3: 0000000859374002 CR4: 00000000001606e0 [ 733.704826] Call Trace: [ 733.707554] cbq_destroy+0xa1/0xd0 [sch_cbq] [ 733.712318] qdisc_destroy+0x62/0x130 [ 733.716401] dsmark_destroy+0x2a/0x70 [sch_dsmark] [ 733.721745] qdisc_destroy+0x62/0x130 [ 733.725829] qdisc_graft+0x3ba/0x470 [ 733.729817] tc_get_qdisc+0x2a6/0x2c0 [ 733.733901] ? cred_has_capability+0x7d/0x130 [ 733.738761] rtnetlink_rcv_msg+0x263/0x2d0 [ 733.743330] ? rtnl_calcit.isra.30+0x110/0x110 [ 733.748287] netlink_rcv_skb+0x4d/0x130 [ 733.752576] netlink_unicast+0x1a3/0x250 [ 733.756949] netlink_sendmsg+0x2ae/0x3a0 [ 733.761324] sock_sendmsg+0x36/0x40 [ 733.765213] ___sys_sendmsg+0x26f/0x2d0 [ 733.769493] ? handle_pte_fault+0x586/0xdf0 [ 733.774158] ? __handle_mm_fault+0x389/0x500 [ 733.778919] ? __sys_sendmsg+0x5e/0xa0 [ 733.783099] __sys_sendmsg+0x5e/0xa0 [ 733.787087] do_syscall_64+0x5b/0x180 [ 733.791171] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 733.796805] RIP: 0033:0x7f9117f23f10 [ 733.800791] Code: c3 48 8b 05 82 6f 2c 00 f7 db 64 89 18 48 83 cb ff eb dd 0f 1f 80 00 00 00 00 83 3d 8d d0 2c 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 [ 733.821873] RSP: 002b:00007ffe96818398 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 733.830319] RAX: ffffffffffffffda RBX: 000000005b71244c RCX: 00007f9117f23f10 [ 733.838280] RDX: 0000000000000000 RSI: 00007ffe968183e0 RDI: 0000000000000003 [ 733.846241] RBP: 00007ffe968183e0 R08: 000000000000ffff R09: 0000000000000003 [ 733.854202] R10: 00007ffe96817e20 R11: 0000000000000246 R12: 0000000000000000 [ 733.862161] R13: 0000000000662ee0 R14: 0000000000000000 R15: 0000000000000000 [ 733.870121] ---[ end trace 28edd4aad712ddca ]--- This is because we didn't update f->result.res when create new filter. Then in tcindex_delete() -> tcf_unbind_filter(), we will failed to find out the res and unbind filter, which will trigger the WARN_ON() in cbq_destroy_class(). Fix it by updating f->result.res when create new filter. Fixes: 6e056569 ("net_sched: fix another crash in cls_tcindex") Reported-by:
Li Shuang <shuali@redhat.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Hangbin Liu authored
Li Shuang reported the following crash: [ 71.267724] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 [ 71.276456] PGD 800000085d9bd067 P4D 800000085d9bd067 PUD 859a0b067 PMD 0 [ 71.284127] Oops: 0000 [#1] SMP PTI [ 71.288015] CPU: 12 PID: 2386 Comm: tc Not tainted 4.18.0-rc8.latest+ #131 [ 71.295686] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.1.5 04/11/2016 [ 71.304037] RIP: 0010:tcindex_delete+0x72/0x280 [cls_tcindex] [ 71.310446] Code: 00 31 f6 48 87 75 20 48 85 f6 74 11 48 8b 47 18 48 8b 40 08 48 8b 40 50 e8 fb a6 f8 fc 48 85 db 0f 84 dc 00 00 00 48 8b 73 18 <8b> 56 04 48 8d 7e 04 85 d2 0f 84 7b 01 00 [ 71.331517] RSP: 0018:ffffb45207b3f898 EFLAGS: 00010282 [ 71.337345] RAX: ffff8ad3d72d6360 RBX: ffff8acc84393680 RCX: 000000000000002e [ 71.345306] RDX: ffff8ad3d72c8570 RSI: 0000000000000000 RDI: ffff8ad847a45800 [ 71.353277] RBP: ffff8acc84393688 R08: ffff8ad3d72c8400 R09: 0000000000000000 [ 71.361238] R10: ffff8ad3de786e00 R11: 0000000000000000 R12: ffffb45207b3f8c7 [ 71.369199] R13: ffff8ad3d93bd2a0 R14: 000000000000002e R15: ffff8ad3d72c9600 [ 71.377161] FS: 00007f9d3ec3e740(0000) GS:ffff8ad3df980000(0000) knlGS:0000000000000000 [ 71.386188] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 71.392597] CR2: 0000000000000004 CR3: 0000000852f06003 CR4: 00000000001606e0 [ 71.400558] Call Trace: [ 71.403299] tcindex_destroy_element+0x25/0x40 [cls_tcindex] [ 71.409611] tcindex_walk+0xbb/0x110 [cls_tcindex] [ 71.414953] tcindex_destroy+0x44/0x90 [cls_tcindex] [ 71.420492] ? tcindex_delete+0x280/0x280 [cls_tcindex] [ 71.426323] tcf_proto_destroy+0x16/0x40 [ 71.430696] tcf_chain_flush+0x51/0x70 [ 71.434876] tcf_block_put_ext.part.30+0x8f/0x1b0 [ 71.440122] tcf_block_put+0x4d/0x70 [ 71.444108] cbq_destroy+0x4d/0xd0 [sch_cbq] [ 71.448869] qdisc_destroy+0x62/0x130 [ 71.452951] dsmark_destroy+0x2a/0x70 [sch_dsmark] [ 71.458300] qdisc_destroy+0x62/0x130 [ 71.462373] qdisc_graft+0x3ba/0x470 [ 71.466359] tc_get_qdisc+0x2a6/0x2c0 [ 71.470443] ? cred_has_capability+0x7d/0x130 [ 71.475307] rtnetlink_rcv_msg+0x263/0x2d0 [ 71.479875] ? rtnl_calcit.isra.30+0x110/0x110 [ 71.484832] netlink_rcv_skb+0x4d/0x130 [ 71.489109] netlink_unicast+0x1a3/0x250 [ 71.493482] netlink_sendmsg+0x2ae/0x3a0 [ 71.497859] sock_sendmsg+0x36/0x40 [ 71.501748] ___sys_sendmsg+0x26f/0x2d0 [ 71.506029] ? handle_pte_fault+0x586/0xdf0 [ 71.510694] ? __handle_mm_fault+0x389/0x500 [ 71.515457] ? __sys_sendmsg+0x5e/0xa0 [ 71.519636] __sys_sendmsg+0x5e/0xa0 [ 71.523626] do_syscall_64+0x5b/0x180 [ 71.527711] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 71.533345] RIP: 0033:0x7f9d3e257f10 [ 71.537331] Code: c3 48 8b 05 82 6f 2c 00 f7 db 64 89 18 48 83 cb ff eb dd 0f 1f 80 00 00 00 00 83 3d 8d d0 2c 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 [ 71.558401] RSP: 002b:00007fff6f893398 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 71.566848] RAX: ffffffffffffffda RBX: 000000005b71274d RCX: 00007f9d3e257f10 [ 71.574810] RDX: 0000000000000000 RSI: 00007fff6f8933e0 RDI: 0000000000000003 [ 71.582770] RBP: 00007fff6f8933e0 R08: 000000000000ffff R09: 0000000000000003 [ 71.590729] R10: 00007fff6f892e20 R11: 0000000000000246 R12: 0000000000000000 [ 71.598689] R13: 0000000000662ee0 R14: 0000000000000000 R15: 0000000000000000 [ 71.606651] Modules linked in: sch_cbq cls_tcindex sch_dsmark xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_coni [ 71.685425] libahci i2c_algo_bit i2c_core i40e libata dca mdio megaraid_sas dm_mirror dm_region_hash dm_log dm_mod [ 71.697075] CR2: 0000000000000004 [ 71.700792] ---[ end trace f604eb1acacd978b ]--- Reproducer: tc qdisc add dev lo handle 1:0 root dsmark indices 64 set_tc_index tc filter add dev lo parent 1:0 protocol ip prio 1 tcindex mask 0xfc shift 2 tc qdisc add dev lo parent 1:0 handle 2:0 cbq bandwidth 10Mbit cell 8 avpkt 1000 mpu 64 tc class add dev lo parent 2:0 classid 2:1 cbq bandwidth 10Mbit rate 1500Kbit avpkt 1000 prio 1 bounded isolated allot 1514 weight 1 maxburst 10 tc filter add dev lo parent 2:0 protocol ip prio 1 handle 0x2e tcindex classid 2:1 pass_on tc qdisc add dev lo parent 2:1 pfifo limit 5 tc qdisc del dev lo root This is because in tcindex_set_parms, when there is no old_r, we set new exts to cr.exts. And we didn't set it to filter when r == &new_filter_result. Then in tcindex_delete() -> tcf_exts_get_net(), we will get NULL pointer dereference as we didn't init exts. Fix it by moving tcf_exts_change() after "if (old_r && old_r != r)" check. Then we don't need "cr" as there is no errout after that. Fixes: bf63ac73 ("net_sched: fix an oops in tcindex filter") Reported-by:
-
Jakub Kicinski authored
Remove 'Return:' information from functions which no longer return a value. Also update name and return types of nfp_nffw_info access functions. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by:
-
- 13 Aug, 2018 26 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5e-updates-2018-08-10 This series provides the following updates to mlx5e netdevice driver. 1) First 4 patches extends the support for ethtool rxnfc flow steering - Added ipv6 support - l4 proto ip field for both ip6 and ip4 2) Next 4 patches, reorganizing flow steering structures and declaration into one header file, and add two Kconfig flags to allow disabling/enabling mlx5 netdevice rx flow steering at compile time: CONFIG_MLX5_EN_ARFS for en_arfs.c CONFIG_MLX5_EN_RXNFC for en_fs_ehtool.c 3) More kconfig flags dependencies - vxlan.c depends on CONFIG_VXLAN - clock.c depends on CONFIG_PTP_1588_CLOCK 4) Reorganize the Makefile ==================== Signed-off-by: -
Eli Cohen authored
The last argument to mlx5_add_flow_rules passes the number of destinations in the struct pointed to by the dest arg. Change the name to better reflect this fact. Signed-off-by:
Eli Cohen <eli@mellanox.com> Reviewed-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Saeed Mahameed authored
Reorganize the Makefile and group files together according to their functionality and importance. Signed-off-by: -
Moshe Shemesh authored
lib/clock.c includes clock related functions which require ptp support. Thus compile out lib/clock.c and add the needed function stubs in case kconfig CONFIG_PTP_1588_CLOCK is off. Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
-
Saeed Mahameed authored
When vxlan is not enabled by kernel, no need to enable it in mlx5. Compile out lib/vxlan.c if CONFIG_VXLAN is not selected. Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com>
-
Saeed Mahameed authored
Move flow steering declarations and definitions into the dedicated en/fs.h header file Signed-off-by:
-
Saeed Mahameed authored
Add new mlx5 Kconfig flag to allow selecting accelerated flow steering support, and compile out en_arfs.c if not selected. Move arfs declarations and definitions to en/fs.h header file. Signed-off-by:
-
Saeed Mahameed authored
Add new mlx5 Kconfig flag to allow selecting ethtool rx nfc support, and compile out en_fs_ehtool.c if not selected. Add en/fs.h header file to host all steering declarations and definitions. Signed-off-by:
-
Saeed Mahameed authored
Move ethool rxnfc callback into en_fs_etthool file where they belong. This will allow us to make many ethtool fs related helper functions static. Signed-off-by: -
Saeed Mahameed authored
Add support for l4 proto ip field in ethtool flow steering. Example: Redirect icmpv6 to rx queue #2 ethtool -U eth0 flow-type ip6 l4proto 58 action 2 Signed-off-by: -
Saeed Mahameed authored
Add ip6 support for ethtool flow steering. New supported flow types: ip6|tcp6|udp6| Supported fields: src-ip|dst-ip|src-port|dst-port Signed-off-by: -
Saeed Mahameed authored
Have a parsing function per flow type, that converts from ethtool rx flow spec to mlx5 flow spec. Will be useful to add support for ip6 ethtool flow steering in the next patch. Signed-off-by: -
Saeed Mahameed authored
Have a ethtool rx flow spec validation helper function per flow type. Signed-off-by: -
Vlad Buslov authored
Lockdep reports deadlock for following locking scenario in ife action: Task one: 1) Executes ife action update. 2) Takes tcfa_lock. 3) Waits on ife_mod_lock which is already taken by task two. Task two: 1) Executes any path that obtains ife_mod_lock without disabling bh (any path that takes ife_mod_lock while holding tcfa_lock has bh disabled) like loading a meta module, or creating new action. 2) Takes ife_mod_lock. 3) Task is preempted by rate estimator timer. 4) Timer callback waits on tcfa_lock which is taken by task one. In described case tasks deadlock because they take same two locks in different order. To prevent potential deadlock reported by lockdep, always disable bh when obtaining ife_mod_lock. Lockdep warning: [ 508.101192] ===================================================== [ 508.107708] WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected [ 508.114728] 4.18.0-rc8+ #646 Not tainted [ 508.119050] ----------------------------------------------------- [ 508.125559] tc/5460 [HC0[0]:SC0[2]:HE1:SE0] is trying to acquire: [ 508.132025] 000000005a938c68 (ife_mod_lock){++++}, at: find_ife_oplist+0x1e/0xc0 [act_ife] [ 508.140996] and this task is already holding: [ 508.147548] 00000000d46f6c56 (&(&p->tcfa_lock)->rlock){+.-.}, at: tcf_ife_init+0x6ae/0xf40 [act_ife] [ 508.157371] which would create a new lock dependency: [ 508.162828] (&(&p->tcfa_lock)->rlock){+.-.} -> (ife_mod_lock){++++} [ 508.169572] but this new dependency connects a SOFTIRQ-irq-safe lock: [ 508.178197] (&(&p->tcfa_lock)->rlock){+.-.} [ 508.178201] ... which became SOFTIRQ-irq-safe at: [ 508.189771] _raw_spin_lock+0x2c/0x40 [ 508.193906] est_fetch_counters+0x41/0xb0 [ 508.198391] est_timer+0x83/0x3c0 [ 508.202180] call_timer_fn+0x16a/0x5d0 [ 508.206400] run_timer_softirq+0x399/0x920 [ 508.210967] __do_softirq+0x157/0x97d [ 508.215102] irq_exit+0x152/0x1c0 [ 508.218888] smp_apic_timer_interrupt+0xc0/0x4e0 [ 508.223976] apic_timer_interrupt+0xf/0x20 [ 508.228540] cpuidle_enter_state+0xf8/0x5d0 [ 508.233198] do_idle+0x28a/0x350 [ 508.236881] cpu_startup_entry+0xc7/0xe0 [ 508.241296] start_secondary+0x2e8/0x3f0 [ 508.245678] secondary_startup_64+0xa5/0xb0 [ 508.250347] to a SOFTIRQ-irq-unsafe lock: (ife_mod_lock){++++} [ 508.256531] ... which became SOFTIRQ-irq-unsafe at: [ 508.267279] ... [ 508.267283] _raw_write_lock+0x2c/0x40 [ 508.273653] register_ife_op+0x118/0x2c0 [act_ife] [ 508.278926] do_one_initcall+0xf7/0x4d9 [ 508.283214] do_init_module+0x18b/0x44e [ 508.287521] load_module+0x4167/0x5730 [ 508.291739] __do_sys_finit_module+0x16d/0x1a0 [ 508.296654] do_syscall_64+0x7a/0x3f0 [ 508.300788] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 508.306302] other info that might help us debug this: [ 508.315286] Possible interrupt unsafe locking scenario: [ 508.322771] CPU0 CPU1 [ 508.327681] ---- ---- [ 508.332604] lock(ife_mod_lock); [ 508.336300] local_irq_disable(); [ 508.342608] lock(&(&p->tcfa_lock)->rlock); [ 508.349793] lock(ife_mod_lock); [ 508.355990] <Interrupt> [ 508.358974] lock(&(&p->tcfa_lock)->rlock); [ 508.363803] *** DEADLOCK *** [ 508.370715] 2 locks held by tc/5460: [ 508.374680] #0: 00000000e27e4fa4 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x583/0x7b0 [ 508.383366] #1: 00000000d46f6c56 (&(&p->tcfa_lock)->rlock){+.-.}, at: tcf_ife_init+0x6ae/0xf40 [act_ife] [ 508.393648] the dependencies between SOFTIRQ-irq-safe lock and the holding lock: [ 508.403505] -> (&(&p->tcfa_lock)->rlock){+.-.} ops: 1001553 { [ 508.409646] HARDIRQ-ON-W at: [ 508.413136] _raw_spin_lock_bh+0x34/0x40 [ 508.419059] gnet_stats_start_copy_compat+0xa2/0x230 [ 508.426021] gnet_stats_start_copy+0x16/0x20 [ 508.432333] tcf_action_copy_stats+0x95/0x1d0 [ 508.438735] tcf_action_dump_1+0xb0/0x4e0 [ 508.444795] tcf_action_dump+0xca/0x200 [ 508.450673] tcf_exts_dump+0xd9/0x320 [ 508.456392] fl_dump+0x1b7/0x4a0 [cls_flower] [ 508.462798] tcf_fill_node+0x380/0x530 [ 508.468601] tfilter_notify+0xdf/0x1c0 [ 508.474404] tc_new_tfilter+0x84a/0xc90 [ 508.480270] rtnetlink_rcv_msg+0x5bd/0x7b0 [ 508.486419] netlink_rcv_skb+0x184/0x220 [ 508.492394] netlink_unicast+0x31b/0x460 [ 508.507411] netlink_sendmsg+0x3fb/0x840 [ 508.513390] sock_sendmsg+0x7b/0xd0 [ 508.518907] ___sys_sendmsg+0x4c6/0x610 [ 508.524797] __sys_sendmsg+0xd7/0x150 [ 508.530510] do_syscall_64+0x7a/0x3f0 [ 508.536201] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 508.543301] IN-SOFTIRQ-W at: [ 508.546834] _raw_spin_lock+0x2c/0x40 [ 508.552522] est_fetch_counters+0x41/0xb0 [ 508.558571] est_timer+0x83/0x3c0 [ 508.563912] call_timer_fn+0x16a/0x5d0 [ 508.569699] run_timer_softirq+0x399/0x920 [ 508.575840] __do_softirq+0x157/0x97d [ 508.581538] irq_exit+0x152/0x1c0 [ 508.586882] smp_apic_timer_interrupt+0xc0/0x4e0 [ 508.593533] apic_timer_interrupt+0xf/0x20 [ 508.599686] cpuidle_enter_state+0xf8/0x5d0 [ 508.605895] do_idle+0x28a/0x350 [ 508.611147] cpu_startup_entry+0xc7/0xe0 [ 508.617097] start_secondary+0x2e8/0x3f0 [ 508.623029] secondary_startup_64+0xa5/0xb0 [ 508.629245] INITIAL USE at: [ 508.632686] _raw_spin_lock_bh+0x34/0x40 [ 508.638557] gnet_stats_start_copy_compat+0xa2/0x230 [ 508.645491] gnet_stats_start_copy+0x16/0x20 [ 508.651719] tcf_action_copy_stats+0x95/0x1d0 [ 508.657992] tcf_action_dump_1+0xb0/0x4e0 [ 508.663937] tcf_action_dump+0xca/0x200 [ 508.669716] tcf_exts_dump+0xd9/0x320 [ 508.675337] fl_dump+0x1b7/0x4a0 [cls_flower] [ 508.681650] tcf_fill_node+0x380/0x530 [ 508.687366] tfilter_notify+0xdf/0x1c0 [ 508.693031] tc_new_tfilter+0x84a/0xc90 [ 508.698820] rtnetlink_rcv_msg+0x5bd/0x7b0 [ 508.704869] netlink_rcv_skb+0x184/0x220 [ 508.710758] netlink_unicast+0x31b/0x460 [ 508.716627] netlink_sendmsg+0x3fb/0x840 [ 508.722510] sock_sendmsg+0x7b/0xd0 [ 508.727931] ___sys_sendmsg+0x4c6/0x610 [ 508.733729] __sys_sendmsg+0xd7/0x150 [ 508.739346] do_syscall_64 +0x7a/0x3f0 [ 508.744943] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 508.751930] } [ 508.753964] ... key at: [<ffffffff916b3e20>] __key.61145+0x0/0x40 [ 508.760946] ... acquired at: [ 508.764294] _raw_read_lock+0x2f/0x40 [ 508.768513] find_ife_oplist+0x1e/0xc0 [act_ife] [ 508.773692] tcf_ife_init+0x82f/0xf40 [act_ife] [ 508.778785] tcf_action_init_1+0x510/0x750 [ 508.783468] tcf_action_init+0x1e8/0x340 [ 508.787938] tcf_action_add+0xc5/0x240 [ 508.792241] tc_ctl_action+0x203/0x2a0 [ 508.796550] rtnetlink_rcv_msg+0x5bd/0x7b0 [ 508.801200] netlink_rcv_skb+0x184/0x220 [ 508.805674] netlink_unicast+0x31b/0x460 [ 508.810129] netlink_sendmsg+0x3fb/0x840 [ 508.814611] sock_sendmsg+0x7b/0xd0 [ 508.818665] ___sys_sendmsg+0x4c6/0x610 [ 508.823029] __sys_sendmsg+0xd7/0x150 [ 508.827246] do_syscall_64+0x7a/0x3f0 [ 508.831483] entry_SYSCALL_64_after_hwframe+0x49/0xbe the dependencies between the lock to be acquired [ 508.838945] and SOFTIRQ-irq-unsafe lock: [ 508.851177] -> (ife_mod_lock){++++} ops: 95 { [ 508.855920] HARDIRQ-ON-W at: [ 508.859478] _raw_write_lock+0x2c/0x40 [ 508.865264] register_ife_op+0x118/0x2c0 [act_ife] [ 508.872071] do_one_initcall+0xf7/0x4d9 [ 508.877947] do_init_module+0x18b/0x44e [ 508.883819] load_module+0x4167/0x5730 [ 508.889595] __do_sys_finit_module+0x16d/0x1a0 [ 508.896043] do_syscall_64+0x7a/0x3f0 [ 508.901734] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 508.908827] HARDIRQ-ON-R at: [ 508.912359] _raw_read_lock+0x2f/0x40 [ 508.918043] find_ife_oplist+0x1e/0xc0 [act_ife] [ 508.924692] tcf_ife_init+0x82f/0xf40 [act_ife] [ 508.931252] tcf_action_init_1+0x510/0x750 [ 508.937393] tcf_action_init+0x1e8/0x340 [ 508.943366] tcf_action_add+0xc5/0x240 [ 508.949130] tc_ctl_action+0x203/0x2a0 [ 508.954922] rtnetlink_rcv_msg+0x5bd/0x7b0 [ 508.961024] netlink_rcv_skb+0x184/0x220 [ 508.966970] netlink_unicast+0x31b/0x460 [ 508.972915] netlink_sendmsg+0x3fb/0x840 [ 508.978859] sock_sendmsg+0x7b/0xd0 [ 508.984400] ___sys_sendmsg+0x4c6/0x610 [ 508.990264] __sys_sendmsg+0xd7/0x150 [ 508.995952] do_syscall_64+0x7a/0x3f0 [ 509.001643] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 509.008722] SOFTIRQ-ON-W at:\ [ 509.012242] _raw_write_lock+0x2c/0x40 [ 509.018013] register_ife_op+0x118/0x2c0 [act_ife] [ 509.024841] do_one_initcall+0xf7/0x4d9 [ 509.030720] do_init_module+0x18b/0x44e [ 509.036604] load_module+0x4167/0x5730 [ 509.042397] __do_sys_finit_module+0x16d/0x1a0 [ 509.048865] do_syscall_64+0x7a/0x3f0 [ 509.054551] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 509.061636] SOFTIRQ-ON-R at: [ 509.065145] _raw_read_lock+0x2f/0x40 [ 509.070854] find_ife_oplist+0x1e/0xc0 [act_ife] [ 509.077515] tcf_ife_init+0x82f/0xf40 [act_ife] [ 509.084051] tcf_action_init_1+0x510/0x750 [ 509.090172] tcf_action_init+0x1e8/0x340 [ 509.096124] tcf_action_add+0xc5/0x240 [ 509.101891] tc_ctl_action+0x203/0x2a0 [ 509.107671] rtnetlink_rcv_msg+0x5bd/0x7b0 [ 509.113811] netlink_rcv_skb+0x184/0x220 [ 509.119768] netlink_unicast+0x31b/0x460 [ 509.125716] netlink_sendmsg+0x3fb/0x840 [ 509.131668] sock_sendmsg+0x7b/0xd0 [ 509.137167] ___sys_sendmsg+0x4c6/0x610 [ 509.143010] __sys_sendmsg+0xd7/0x150 [ 509.148718] do_syscall_64+0x7a/0x3f0 [ 509.154443] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 509.161533] INITIAL USE at: [ 509.164956] _raw_read_lock+0x2f/0x40 [ 509.170574] find_ife_oplist+0x1e/0xc0 [act_ife] [ 509.177134] tcf_ife_init+0x82f/0xf40 [act_ife] [ 509.183619] tcf_action_init_1+0x510/0x750 [ 509.189674] tcf_action_init+0x1e8/0x340 [ 509.195534] tcf_action_add+0xc5/0x240 [ 509.201229] tc_ctl_action+0x203/0x2a0 [ 509.206920] rtnetlink_rcv_msg+0x5bd/0x7b0 [ 509.212936] netlink_rcv_skb+0x184/0x220 [ 509.218818] netlink_unicast+0x31b/0x460 [ 509.224699] netlink_sendmsg+0x3fb/0x840 [ 509.230581] sock_sendmsg+0x7b/0xd0 [ 509.235984] ___sys_sendmsg+0x4c6/0x610 [ 509.241791] __sys_sendmsg+0xd7/0x150 [ 509.247425] do_syscall_64+0x7a/0x3f0 [ 509.253007] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 509.259975] } [ 509.261998] ... key at: [<ffffffffc1554258>] ife_mod_lock+0x18/0xffffffffffff8dc0 [act_ife] [ 509.271569] ... acquired at: [ 509.274912] _raw_read_lock+0x2f/0x40 [ 509.279134] find_ife_oplist+0x1e/0xc0 [act_ife] [ 509.284324] tcf_ife_init+0x82f/0xf40 [act_ife] [ 509.289425] tcf_action_init_1+0x510/0x750 [ 509.294068] tcf_action_init+0x1e8/0x340 [ 509.298553] tcf_action_add+0xc5/0x240 [ 509.302854] tc_ctl_action+0x203/0x2a0 [ 509.307153] rtnetlink_rcv_msg+0x5bd/0x7b0 [ 509.311805] netlink_rcv_skb+0x184/0x220 [ 509.316282] netlink_unicast+0x31b/0x460 [ 509.320769] netlink_sendmsg+0x3fb/0x840 [ 509.325248] sock_sendmsg+0x7b/0xd0 [ 509.329290] ___sys_sendmsg+0x4c6/0x610 [ 509.333687] __sys_sendmsg+0xd7/0x150 [ 509.337902] do_syscall_64+0x7a/0x3f0 [ 509.342116] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 509.349601] stack backtrace: [ 509.354663] CPU: 6 PID: 5460 Comm: tc Not tainted 4.18.0-rc8+ #646 [ 509.361216] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 Fixes: ef6980b6 ("introduce IFE action") Signed-off-by:Vlad Buslov <vladbu@mellanox.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2018-08-13 There was one pretty bad bug that slipped into the MediaTek HCI driver in the last bluetooth-next pull request. Would it be possible to get this one-liner fix pulled to net-next before you make your first 4.19 pull request for Linus? Thanks. ==================== Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-08-13 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add driver XDP support for veth. This can be used in conjunction with redirect of another XDP program e.g. sitting on NIC so the xdp_frame can be forwarded to the peer veth directly without modification, from Toshiaki. 2) Add a new BPF map type REUSEPORT_SOCKARRAY and prog type SK_REUSEPORT in order to provide more control and visibility on where a SO_REUSEPORT sk should be located, and the latter enables to directly select a sk from the bpf map. This also enables map-in-map for application migration use cases, from Martin. 3) Add a new BPF helper bpf_skb_ancestor_cgroup_id() that returns the id of cgroup v2 that is the ancestor of the cgroup associated with the skb at the ancestor_level, from Andrey. 4) Implement BPF fs map pretty-print support based on BTF data for regular hash table and LRU map, from Yonghong. 5) Decouple the ability to attach BTF for a map from the key and value pretty-printer in BPF fs, and enable further support of BTF for maps for percpu and LPM trie, from Daniel. 6) Implement a better BPF sample of using XDP's CPU redirect feature for load balancing SKB processing to remote CPU. The sample implements the same XDP load balancing as Suricata does which is symmetric hash based on IP and L4 protocol, from Jesper. 7) Revert adding NULL pointer check with WARN_ON_ONCE() in __xdp_return()'s critical path as it is ensured that the allocator is present, from Björn. ==================== Signed-off-by: -
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2018-08-12' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== pull-request: wireless-drivers-next 2018-08-12 wireless-drivers-next patches for 4.19 Last set of new features for 4.19. Most notable is simplifying SSB debugging code with two Kconfig option removals and fixing mt76 USB build problems. Major changes: ath10k * add debugfs file warm_hw_reset wil6210 * add debugfs files tx_latency, link_stats and link_stats_global * add 3-MSI support * allow scan on AP interface * support max aggregation window size 64 ssb * remove CONFIG_SSB_SILENT and CONFIG_SSB_DEBUG Kconfig options mt76 * fix build problems with recently added USB support ==================== Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/cavium/liquidio/lio_ethtool.c: In function 'lio_set_link_ksettings': drivers/net/ethernet/cavium/liquidio/lio_ethtool.c:392:6: warning: variable 'is25G' set but not used [-Wunused-but-set-variable] Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c: In function 'print_port_info': drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:5147:14: warning: variable 'spd' set but not used [-Wunused-but-set-variable] variable 'spd' is set but not used since commit 547fd272 ("cxgb4: Warn if device doesn't have enough PCI bandwidth") Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Yue Haibing authored
Remove duplicated include. Signed-off-by:
-
YueHaibing authored
Remove duplicated include linux/netdevice.h Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Li RongQing authored
The patches includes following change: *Use modern kvzalloc()/kvfree() instead of custom allocations. *Remove order argument for alloc_pg_vec, it can get from req. *Remove order argument for free_pg_vec, free_pg_vec now uses kvfree which does not need order argument. *Remove pg_vec_order from struct packet_ring_buffer, no longer need to save/restore 'order' *Remove variable 'order' for packet_set_ring, it is now unused Signed-off-by:
Zhang Yu <zhangyu31@baidu.com> Signed-off-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
-
Zong Li authored
There is an unalignment access about the structure 'trace_event_raw_fib_table_lookup'. In include/trace/events/fib.h, there is a memory operation which casting the 'src' data member to a pointer, and then store a value to this pointer point to. p32 = (__be32 *) __entry->src; *p32 = flp->saddr; The offset of 'src' in structure trace_event_raw_fib_table_lookup is not four bytes alignment. On some architectures, they don't permit the unalignment access, it need to pay the price to handle this situation in exception handler. Adjust the layout of structure to avoid this case. Fixes: 9f323973 ("net/ipv4: Udate fib_table_lookup tracepoint") Signed-off-by:
Zong Li <zong@andestech.com> Acked-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
David S. Miller authored
Jamal Hadi Salim says: ==================== net: sched: actions rename for grep-ability and consistency Having a structure (example tcf_mirred) and a function with the same name is not good for readability or grepability. This long overdue patchset improves it and make sure there is consistency across all actions ==================== Signed-off-by: -
Jamal Hadi Salim authored
Signed-off-by:
-
Jamal Hadi Salim authored
Signed-off-by:
-
