- 04 May, 2016 1 commit
-
-
Douglas Gilbert authored
Use TYPE_* constants for SCSI peripheral device types instead of numbers. Further cleanups requested by checkpatch.pl. Signed-off-by:
Douglas Gilbert <dgilbert@interlog.com> Reviewed-by:
Hannes Reinicke <hare@suse.de> Reviewed-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
- 29 Apr, 2016 25 commits
-
-
Douglas Gilbert authored
The most common commands in normal use are the READ and WRITE SCSI commands. Use likely and unlikely hints along the path taken by these commands. Rename check_readiness() to make_ua() and remove associated dead code. Rename devInfoReg() to find_build_dev_info(). Signed-off-by:
-
Douglas Gilbert authored
Group most defines together first; followed by struct definitions and then table and variable definitions. Normalize all function headers. [mkp: Corrected hex value in WP/DPOFUA MODE SENSE comment] Signed-off-by:
-
Douglas Gilbert authored
When a negative value was placed in the delay parameter, a tasklet was scheduled. Change the tasklet to a work queue. Previously a delay of -1 scheduled a high priority tasklet; since there are no high priority work queues, treat -1 like other negative values in delay and schedule a work item. Signed-off-by:
-
Douglas Gilbert authored
Add 'j' to delay names to make it clearer that its unit is jiffies and to differentiate it from sdebug_ndelay whose unit is nanoseconds. Signed-off-by:
-
Douglas Gilbert authored
The driver supports two command delay interfaces, the original one whose unit is a jiffy, and a newer one whose unit is a nanosecond. Each had different implementations. Keep both interfaces but simplify the implemenation to use a single delay mechanism based on high resolution timers. Signed-off-by:
-
Douglas Gilbert authored
Remove logic to optionally hold host_lock while each command is queued. Keep module and sysfs host_lock parameters for backward compatibility. Note in module parameter description that host_lock is ignored. Signed-off-by:
-
Douglas Gilbert authored
Shorten file scope static and constant names. Use more get/put_unaligned calls to hide bit banging. Introduce sdebug_verbose boolean to replace frequent masking of option bit flags. Add GPL and bump version. [mkp: Use logical instead of bitwise OR for LBP VPD flags] Signed-off-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Don Brace authored
Reviewed-by:
Gerry Morong <gerry.morong@microsemi.com> Signed-off-by:
Don Brace <don.brace@microsemi.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Don Brace authored
Need to report HBA device removal faster than the event handler polling interval. Stop I/O to the removed disk and wait for all I/O operations to flush before removing the device. Reviewed-by:
Scott Teel <scott.teel@microsemi.com> Reviewed-by:
Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by:
-
Don Brace authored
set offload_to_be_enabled to 0 when an ioaccel2 error is processed. Before, an ioaccel completion error would turn of ioaccel but a rescan would turn it back on again. Reviewed-by:
-
Don Brace authored
offload_to_be_enabled also needs to be set to 0 during a state change. Reviewed-by:
-
Don Brace authored
faulty drives can cause the driver to hang during a scan operation. Reviewed-by:
-
Joseph T Handzik authored
There have been companies requesting a sysfs entry to obtain the sas address of device. Reviewed-by:
-
Don Brace authored
The driver was calling scsi_scan_host before enabling interrupts. This has gone unnoticed except for customers running in intx mode. Calling scsi_scan_host before interrupts are enabled causes "irq XX: nobody cared" messages and the driver to hang. This patch enables interrupts before the call to scsi_scan_host. Reported-by:
Piotr Karbowski <piotr.karbowski@gmail.com> Reviewed-by:
-
Raghava Aditya Renukunta authored
Signed-off-by:
Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by:
-
Raghava Aditya Renukunta authored
When KDUMP is triggered the driver first talks to the firmware in INTX mode, but the adapter firmware is still in MSIX mode. Therefore the first driver command hangs since the driver is waiting for an INTX response and firmware gives a MSIX response. If when the OS is installed on a RAID drive created by the adapter KDUMP will hang since the driver does not receive a response in sync mode. Fixed by: Change the firmware to INTX mode if it is in MSIX mode before sending the first sync command. Cc: stable@vger.kernel.org Signed-off-by:
-
Raghava Aditya Renukunta authored
Currently driver completes double completed or spurious interrupted fibs. This is not necessary and causes the SCSI mid layer to issue aborts and resets, since completing a fib prematurely might trigger a race condition resulting in the driver not calling the scsi_done callback. Fixed by removing the call to fib complete. Signed-off-by:
-
Raghava Aditya Renukunta authored
Firmware AIF messages about cache loss and data recovery are being missed by the driver since currently they are not captured but rather let go. This patch to capture those messages and log them for the user. Signed-off-by:
-
Raghava Aditya Renukunta authored
Typically under error conditions, it is possible for aac_command_thread() to miss the wakeup from kthread_stop() and go back to sleep, causing it to hang aac_shutdown. In the observed scenario, the adapter is not functioning correctly and so aac_fib_send() never completes (or time-outs depending on how it was called). Shortly after aac_command_thread() starts it performs aac_fib_send(SendHostTime) which hangs. When aac_probe_one /aac_get_adapter_info send time outs, kthread_stop is called which breaks the command thread out of it's hang. The code will still go back to sleep in schedule_timeout() without checking kthread_should_stop() so it causes aac_probe_one to hang until the schedule_timeout() which is 30 minutes. Fixed by: Adding another kthread_should_stop() before schedule_timeout() Cc: stable@vger.kernel.org Signed-off-by:
-
Raghava Aditya Renukunta authored
As the firmware for series 6, 7, 8 cards does not support msi, remove it in the driver Signed-off-by:
-
Raghava Aditya Renukunta authored
aac_fib_send has a special function case for initial commands during driver initialization using wait < 0(pseudo sync mode). In this case, the command does not sleep but rather spins checking for timeout.This loop is calls cpu_relax() in an attempt to allow other processes/threads to use the CPU, but this function does not relinquish the CPU and so the command will hog the processor. This was observed in a KDUMP "crashkernel" and that prevented the "command thread" (which is responsible for completing the command from being timed out) from starting because it could not get the CPU. Fixed by replacing "cpu_relax()" call with "schedule()" Cc: stable@vger.kernel.org Signed-off-by:
-
Raghava Aditya Renukunta authored
The adapter has to be started after updating the number of MSIX Vectors Fixes: ecc479e0 (aacraid: Set correct MSIX count for EEH recovery) Cc: stable@vger.kernel.org Signed-off-by:
-
Raghava Aditya Renukunta authored
Suggested-by:
Seymour, Shane M <shane.seymour@hpe.com> Signed-off-by:
-
Raghava Aditya Renukunta authored
Current driver checks for NULL return from aac_fib_alloc_tag, but it not possible for it to return NULL. Fixed by: Remove all the checks for NULL returns from aac_fib_alloc_tag Suggested-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
-
Alexey Khoroshilov authored
mptsas_smp_handler() checks for dma mapping errors by comparison returned address with zero, while pci_dma_mapping_error() should be used. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by:
Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by:
-
- 26 Apr, 2016 6 commits
-
-
Finn Thain authored
The file atari_NCR5380.c has been removed from the tree so remove it from the MAINTAINERS file as well. While we are here, add the file dtc3x80.txt as it is only relevant to the dtc driver. Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
-
Kai Makisara authored
Some drives set the ILI flag together with MEDIUM ERROR sense code. Clear the ILI flag in this case so that the medium error will be handled. The problem was reported by Maurizio Lombardi. Signed-off-by:
Kai Mäkisara <kai.makisara@kolumbus.fi> Reviewed-by:
Laurence Oberman <loberman@redhat.com> Signed-off-by:
-
Sebastian Herbszt authored
Remove incorrect lockdep assertion from lpfc_sli_hbqbuf_find() which acquires the hbalock itself. Fix the comment which resulted in this mistake. Fixes: 1c2ba475 ("lpfc: Add lockdep assertions") Signed-off-by:
Sebastian Herbszt <herbszt@gmx.de> Reviewed-by:
-
Dan Carpenter authored
Presumably it isn't possible to have empty lists here, but my static checker doesn't know that and complains that "ep" can be used uninitialized. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by:
-
Dan Carpenter authored
This has only called from show_sas_rphy_enclosure_identifier(). The caller expects that we set an identifier, otherwise it uses an uninitialized variable. [mkp: fixed typo] Signed-off-by:
-
Joe Lawrence authored
Firmware events are queued up using the fw_event_work's struct work, not its delayed_work member. The initial driver for SAS2 controllers had handled firmware reset using the rescan barrier and was later redesigned through "mpt2sas: [Resend] Host Reset code cleanup". The delayed_work variables are now unused and may provoke CONFIG_DEBUG_OBJECTS_TIMERS "assert_init not available" false warnings in _scsih_fw_event_cleanup_queue. Cleanup fw_event_work's unused entries, update its kerneldoc, and update _scsih_fw_event_cleanup_queue accordingly. Fixes: 146b16c8 (mpt3sas: Refcount fw_events and fix unsafe list usage) Signed-off-by:
Joe Lawrence <joe.lawrence@stratus.com> Acked-by:
Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by:
-
- 15 Apr, 2016 8 commits
-
-
John Garry authored
Add custom version of function to allocate device, alloc_dev_quirk_v2_hw(). For sata devices the device id bit0 should be 0. Signed-off-by:
John Garry <john.garry@huawei.com> Reviewed-by:
-
John Garry authored
Add v2 hw custom function slot_index_alloc_quirk_v2_hw(). SAS devices should have IPTT bit0 equal to 1. Signed-off-by:
-
John Garry authored
Add methods to use HW specific versions of functions to allocate slot and device. HW specific methods are permitted to workaround device id vs IPTT collision issue in v2 hw. Signed-off-by:
-
Sumit Saxena authored
Signed-off-by:
Sumit Saxena <sumit.saxena@broadcom.com> Reviewed-by:
-
Sumit Saxena authored
This patch will do code optmization for task management functions. Below are key changes: 1. Remove reset_device hook as it was not being used and driver was setting this to NULL. 2. Create wrapper functions for task abort and target reset and inside these functions adapter specific calls be made. e.g. fusion adapters support task abort and target reset so task abort and target reset should be issued to fusion adapters only and for MFI adapters, print a message saying feature not supported. Signed-off-by:
-
Sumit Saxena authored
In OCR path, before calling chip reset calls function megasas_wait_for_outstanding_fusion to check reason for OCR. In case of firmware FAULT initiated OCR and DCMD timeout initiated timeout, driver will clear any outstanding reply (yet to be processed by driver) in reply queues before going for chip reset. This code is added to handle a scenario when IO timeout initiated adapter reset and management application initiated adapter reset (by sending command to FAULT firmware) happens simultaneously since adapter reset function is safe-guarded by reset_mutex so only thread will be doing controller reset. Consider IO timeout thread gets mutex and proceeds with adapter reset process after disabling interrupts and by the time management application has fired command to firmware to do adapter reset and the same command is completed by firmware but since interrupts are disabled, driver will not get completion and the same command will be in outstanding/pending commands list of driver and refires same command from IO timeout thread after chip reset which will again FAULT firmware and eventually causes kill adapter. Signed-off-by:
-
Sumit Saxena authored
This patch will reduce memory footprints of megaraid_sas driver when booted in kdump mode. Driver will not allocate memory for optional and perfromance oriented features. Below are key changes done in megaraid_sas driver to do this: 1. Limit Controller's queue depth to 100 in kdump mode. 2. Do not allocate memory for system info buffer and PD info buffer. 3. Disable performance oriented features e.g. Disable RDPQ mode, disable dual queue depth, restrict to single MSI-x vector. Signed-off-by:
-
Bart Van Assche authored
This patch avoids that building with W=1 causes gcc to report the following type of warning: no previous prototype for ... [-Wmissing-prototypes] Signed-off-by:
-
