- 15 Jun, 2019 40 commits
-
-
Chao Yu authored
[ Upstream commit b42b179b ] As Jungyeon reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203221 - Overview When mounting the attached crafted image and running program, this error is reported. The image is intentionally fuzzed from a normal f2fs image for testing and I enabled option CONFIG_F2FS_CHECK_FS on. - Reproduces cc poc_07.c mkdir test mount -t f2fs tmp.img test cp a.out test cd test sudo ./a.out - Messages kernel BUG at fs/f2fs/node.c:1279! RIP: 0010:read_node_page+0xcf/0xf0 Call Trace: __get_node_page+0x6b/0x2f0 f2fs_iget+0x8f/0xdf0 f2fs_lookup+0x136/0x320 __lookup_slow+0x92/0x140 lookup_slow+0x30/0x50 walk_component+0x1c1/0x350 path_lookupat+0x62/0x200 filename_lookup+0xb3/0x1a0 do_fchmodat+0x3e/0xa0 __x64_sys_chmod+0x12/0x20 do_syscall_64+0x43/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 On below paths, we can have opportunity to readahead inode page - gc_node_segment -> f2fs_ra_node_page - gc_data_segment -> f2fs_ra_node_page - f2fs_fill_dentries -> f2fs_ra_node_page Unlike synchronized read, on readahead path, we can set page uptodate before verifying page's checksum, then read_node_page() will trigger kernel panic once it encounters a uptodated page w/ incorrect checksum. So considering readahead scenario, we have to do checksum each time when loading inode page even if it is uptodated. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Chao Yu authored
[ Upstream commit 45a74688 ] With below mkfs and mount option, generic/339 of fstest will report that scratch image becomes corrupted. MKFS_OPTIONS -- -O extra_attr -O project_quota -O inode_checksum -O flexible_inline_xattr -O inode_crtime -f /dev/zram1 MOUNT_OPTIONS -- -o acl,user_xattr -o discard,noinline_xattr /dev/zram1 /mnt/scratch_f2fs [ASSERT] (f2fs_check_dirent_position:1315) --> Wrong position of dirent pino:1970, name: (...) level:8, dir_level:0, pgofs:951, correct range:[900, 901] In old kernel, inline data and directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled, then new kernel tries to retrieve that space for non-inline xattr inode, but for inline dentry, its layout size should be fixed, so we just keep that reserved space. But the problem here is that, after inline dentry conversion, inline dentry layout no longer exists, if we still reserve inline xattr space, after dents updates, there will be a hole in inline xattr space, which can break hierarchy hash directory structure. This patch fixes this issue by retrieving inline xattr space after inline dentry conversion. Fixes: 6afc662e ("f2fs: support flexible inline xattr size") Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Chao Yu authored
[ Upstream commit 793ab1c8 ] As Jungyeon reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203211 - Overview When mounting the attached crafted image and making a new file, I got this error and the error messages keep repeating. The image is intentionally fuzzed from a normal f2fs image for testing and I run with option CONFIG_F2FS_CHECK_FS on. - Reproduces mkdir test mount -t f2fs tmp.img test cd test touch t - Messages [ 58.820451] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.821485] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.822530] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.823571] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.824616] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.825640] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.826663] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.827698] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.828719] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.829759] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.830783] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.831828] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.832869] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.833888] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.834945] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.835996] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.837028] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.838051] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.839072] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.840100] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.841147] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.842186] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.843214] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.844267] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.845282] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.846305] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.847341] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT ... (repeating) During GC, if segment type stored in SSA and SIT is inconsistent, we just skip migrating current segment directly, since we need to know the exact type to decide the migration function we use. So in foreground GC, we will easily run into a infinite loop as we may select the same victim segment which has inconsistent type due to greedy policy. In order to end up this, we choose to shutdown filesystem. For backgrond GC, we need to do that as well, so that we can avoid latter potential infinite looped foreground GC. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Chao Yu authored
[ Upstream commit e95bcdb2 ] As Jungyeon reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203233 - Overview When mounting the attached crafted image and running program, following errors are reported. Additionally, it hangs on sync after running program. The image is intentionally fuzzed from a normal f2fs image for testing. Compile options for F2FS are as follows. CONFIG_F2FS_FS=y CONFIG_F2FS_STAT_FS=y CONFIG_F2FS_FS_XATTR=y CONFIG_F2FS_FS_POSIX_ACL=y CONFIG_F2FS_CHECK_FS=y - Reproduces cc poc_13.c mkdir test mount -t f2fs tmp.img test cp a.out test cd test sudo ./a.out sync - Kernel messages F2FS-fs (sdb): Bitmap was wrongly set, blk:4608 kernel BUG at fs/f2fs/segment.c:2102! RIP: 0010:update_sit_entry+0x394/0x410 Call Trace: f2fs_allocate_data_block+0x16f/0x660 do_write_page+0x62/0x170 f2fs_do_write_node_page+0x33/0xa0 __write_node_page+0x270/0x4e0 f2fs_sync_node_pages+0x5df/0x670 f2fs_write_checkpoint+0x372/0x1400 f2fs_sync_fs+0xa3/0x130 f2fs_do_sync_file+0x1a6/0x810 do_fsync+0x33/0x60 __x64_sys_fsync+0xb/0x10 do_syscall_64+0x43/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 sit.vblocks and sum valid block count in sit.valid_map may be inconsistent, segment w/ zero vblocks will be treated as free segment, while allocating in free segment, we may allocate a free block, if its bitmap is valid previously, it can cause kernel crash due to bitmap verification failure. Anyway, to avoid further serious metadata inconsistence and corruption, it is necessary and worth to detect SIT inconsistence. So let's enable check_block_count() to verify vblocks and valid_map all the time rather than do it only CONFIG_F2FS_CHECK_FS is enabled. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Chao Yu authored
[ Upstream commit ea6d7e72 ] As Jungyeon reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203213 - Overview When mounting the attached crafted image and running program, I got this error. Additionally, it hangs on sync after running the this script. The image is intentionally fuzzed from a normal f2fs image for testing and I enabled option CONFIG_F2FS_CHECK_FS on. - Reproduces mkdir test mount -t f2fs tmp.img test cp a.out test cd test sudo ./a.out sync kernel BUG at fs/f2fs/f2fs.h:2012! RIP: 0010:truncate_node+0x2c9/0x2e0 Call Trace: f2fs_truncate_xattr_node+0xa1/0x130 f2fs_remove_inode_page+0x82/0x2d0 f2fs_evict_inode+0x2a3/0x3a0 evict+0xba/0x180 __dentry_kill+0xbe/0x160 dentry_kill+0x46/0x180 dput+0xbb/0x100 do_renameat2+0x3c9/0x550 __x64_sys_rename+0x17/0x20 do_syscall_64+0x43/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The reason is dec_valid_node_count() will trigger kernel panic due to inconsistent count in between inode.i_blocks and actual block. To avoid panic, let's just print debug message and set SBI_NEED_FSCK to give a hint to fsck for latter repairing. Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix build warning and add unlikely] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Chao Yu authored
[ Upstream commit 622927f3 ] With below mkfs and mount option: MKFS_OPTIONS -- -O extra_attr -O project_quota -O inode_checksum -O flexible_inline_xattr -O inode_crtime -f MOUNT_OPTIONS -- -o noinline_xattr We may miss xattr data with below testcase: - mkdir dir - setfattr -n "user.name" -v 0 dir - for ((i = 0; i < 190; i++)) do touch dir/$i; done - umount - mount - getfattr -n "user.name" dir user.name: No such attribute The root cause is that we persist xattr data into reserved inline xattr space, even if inline_xattr is not enable in inline directory inode, after inline dentry conversion, reserved space no longer exists, so that xattr data missed. Let's use inline xattr space only if inline_xattr flag is set on inode to fix this iusse. Fixes: 6afc662e ("f2fs: support flexible inline xattr size") Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Chao Yu authored
[ Upstream commit 5e159cd3 ] As Jungyeon reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203209 - Overview When mounting the attached crafted image and running program, I got this error. Additionally, it hangs on sync after the this script. The image is intentionally fuzzed from a normal f2fs image for testing and I enabled option CONFIG_F2FS_CHECK_FS on. - Reproduces cc poc_01.c ./run.sh f2fs sync kernel BUG at fs/f2fs/f2fs.h:1788! RIP: 0010:f2fs_truncate_data_blocks_range+0x342/0x350 Call Trace: f2fs_truncate_blocks+0x36d/0x3c0 f2fs_truncate+0x88/0x110 f2fs_setattr+0x3e1/0x460 notify_change+0x2da/0x400 do_truncate+0x6d/0xb0 do_sys_ftruncate+0xf1/0x160 do_syscall_64+0x43/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The reason is dec_valid_block_count() will trigger kernel panic due to inconsistent count in between inode.i_blocks and actual block. To avoid panic, let's just print debug message and set SBI_NEED_FSCK to give a hint to fsck for latter repairing. Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix build warning and add unlikely] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Chao Yu authored
[ Upstream commit 546d22f0 ] As Jungyeon reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203217 - Overview When mounting the attached crafted image and running program, I got this error. Additionally, it hangs on sync after running the program. The image is intentionally fuzzed from a normal f2fs image for testing and I enabled option CONFIG_F2FS_CHECK_FS on. - Reproduces cc poc_test_05.c mkdir test mount -t f2fs tmp.img test sudo ./a.out sync - Messages kernel BUG at fs/f2fs/inode.c:707! RIP: 0010:f2fs_evict_inode+0x33f/0x3a0 Call Trace: evict+0xba/0x180 f2fs_iget+0x598/0xdf0 f2fs_lookup+0x136/0x320 __lookup_slow+0x92/0x140 lookup_slow+0x30/0x50 walk_component+0x1c1/0x350 path_lookupat+0x62/0x200 filename_lookup+0xb3/0x1a0 do_readlinkat+0x56/0x110 __x64_sys_readlink+0x16/0x20 do_syscall_64+0x43/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 During inode loading, __recover_inline_status() can recovery inode status and set inode dirty, once we failed in following process, it will fail the check in f2fs_evict_inode, result in trigger BUG_ON(). Let's clear dirty inode in error path of f2fs_iget() to avoid panic. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Chao Yu authored
[ Upstream commit 626bcf2b ] As Jungyeon reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203225 - Overview When mounting the attached crafted image and unmounting it, following errors are reported. Additionally, it hangs on sync after unmounting. The image is intentionally fuzzed from a normal f2fs image for testing. Compile options for F2FS are as follows. CONFIG_F2FS_FS=y CONFIG_F2FS_STAT_FS=y CONFIG_F2FS_FS_XATTR=y CONFIG_F2FS_FS_POSIX_ACL=y CONFIG_F2FS_CHECK_FS=y - Reproduces mkdir test mount -t f2fs tmp.img test touch test/t umount test sync - Messages kernel BUG at fs/f2fs/node.c:3073! RIP: 0010:f2fs_destroy_node_manager+0x2f0/0x300 Call Trace: f2fs_put_super+0xf4/0x270 generic_shutdown_super+0x62/0x110 kill_block_super+0x1c/0x50 kill_f2fs_super+0xad/0xd0 deactivate_locked_super+0x35/0x60 cleanup_mnt+0x36/0x70 task_work_run+0x75/0x90 exit_to_usermode_loop+0x93/0xa0 do_syscall_64+0xba/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0010:f2fs_destroy_node_manager+0x2f0/0x300 NAT table is corrupted, so reserved meta/node inode ids were added into free list incorrectly, during file creation, since reserved id has cached in inode hash, so it fails the creation and preallocated nid can not be released later, result in kernel panic. To fix this issue, let's do nid boundary check during free nid loading. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Chao Yu authored
[ Upstream commit 8b6810f8 ] As Jungyeon reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203219 - Overview When mounting the attached crafted image and running program, I got this error. Additionally, it hangs on sync after running the program. The image is intentionally fuzzed from a normal f2fs image for testing and I enabled option CONFIG_F2FS_CHECK_FS on. - Reproduces cc poc_06.c mkdir test mount -t f2fs tmp.img test cp a.out test cd test sudo ./a.out sync - Messages kernel BUG at fs/f2fs/node.c:1183! RIP: 0010:f2fs_remove_inode_page+0x294/0x2d0 Call Trace: f2fs_evict_inode+0x2a3/0x3a0 evict+0xba/0x180 __dentry_kill+0xbe/0x160 dentry_kill+0x46/0x180 dput+0xbb/0x100 do_renameat2+0x3c9/0x550 __x64_sys_rename+0x17/0x20 do_syscall_64+0x43/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The reason is f2fs_remove_inode_page() will trigger kernel panic due to inconsistent i_blocks value of inode. To avoid panic, let's just print debug message and set SBI_NEED_FSCK to give a hint to fsck for latter repairing of potential image corruption. Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix build warning and add unlikely] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Chao Yu authored
[ Upstream commit 98838579 ] There are some places in where we missed to unlock page or unlock page incorrectly, fix them. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Chao Yu authored
[ Upstream commit 05573d6c ] As Jungyeon reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203239 - Overview When mounting the attached crafted image and running program, following errors are reported. Additionally, it hangs on sync after running program. The image is intentionally fuzzed from a normal f2fs image for testing. Compile options for F2FS are as follows. CONFIG_F2FS_FS=y CONFIG_F2FS_STAT_FS=y CONFIG_F2FS_FS_XATTR=y CONFIG_F2FS_FS_POSIX_ACL=y CONFIG_F2FS_CHECK_FS=y - Reproduces cc poc_15.c ./run.sh f2fs sync - Kernel messages ------------[ cut here ]------------ kernel BUG at fs/f2fs/segment.c:3162! RIP: 0010:f2fs_inplace_write_data+0x12d/0x160 Call Trace: f2fs_do_write_data_page+0x3c1/0x820 __write_data_page+0x156/0x720 f2fs_write_cache_pages+0x20d/0x460 f2fs_write_data_pages+0x1b4/0x300 do_writepages+0x15/0x60 __filemap_fdatawrite_range+0x7c/0xb0 file_write_and_wait_range+0x2c/0x80 f2fs_do_sync_file+0x102/0x810 do_fsync+0x33/0x60 __x64_sys_fsync+0xb/0x10 do_syscall_64+0x43/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The reason is f2fs_inplace_write_data() will trigger kernel panic due to data block locates in node type segment. To avoid panic, let's just return error code and set SBI_NEED_FSCK to give a hint to fsck for latter repairing. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Chao Yu authored
[ Upstream commit 22d61e28 ] As Jungyeon reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203227 - Overview When mounting the attached crafted image, following errors are reported. Additionally, it hangs on sync after trying to mount it. The image is intentionally fuzzed from a normal f2fs image for testing. Compile options for F2FS are as follows. CONFIG_F2FS_FS=y CONFIG_F2FS_STAT_FS=y CONFIG_F2FS_FS_XATTR=y CONFIG_F2FS_FS_POSIX_ACL=y CONFIG_F2FS_CHECK_FS=y - Reproduces mkdir test mount -t f2fs tmp.img test sync - Messages kernel BUG at fs/f2fs/recovery.c:549! RIP: 0010:recover_data+0x167a/0x1780 Call Trace: f2fs_recover_fsync_data+0x613/0x710 f2fs_fill_super+0x1043/0x1aa0 mount_bdev+0x16d/0x1a0 mount_fs+0x4a/0x170 vfs_kern_mount+0x5d/0x100 do_mount+0x200/0xcf0 ksys_mount+0x79/0xc0 __x64_sys_mount+0x1c/0x20 do_syscall_64+0x43/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 During recovery, if ofs_of_node is inconsistent in between recovered node page and original checkpointed node page, let's just fail recovery instead of making kernel panic. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Miroslav Lichvar authored
[ Upstream commit fdc6bae9 ] The ADJ_TAI adjtimex mode sets the TAI-UTC offset of the system clock. It is typically set by NTP/PTP implementations and it is automatically updated by the kernel on leap seconds. The initial value is zero (which applications may interpret as unknown), but this value cannot be set by adjtimex. This limitation seems to go back to the original "nanokernel" implementation by David Mills. Change the ADJ_TAI check to accept zero as a valid TAI-UTC offset in order to allow setting it back to the initial value. Fixes: 153b5d05 ("ntp: support for TAI") Suggested-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Link: https://lkml.kernel.org/r/20190417084833.7401-1-mlichvar@redhat.comSigned-off-by: Sasha Levin <sashal@kernel.org>
-
Fabien Dessenne authored
[ Upstream commit 68a1c848 ] On failure of_irq_get() returns a negative value or zero, which is not handled as an error in the existing implementation. Instead of using this API, use platform_get_irq() that returns exclusively a negative value on failure. Also, do not output an error log in case of defer probe error. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Martin Blumenstingl authored
[ Upstream commit f173747f ] Holding the spin-lock for all of the code in meson_pwm_apply() can result in a "BUG: scheduling while atomic". This can happen because clk_get_rate() (which is called from meson_pwm_calc()) may sleep. Only hold the spin-lock when modifying registers to solve this. The reason why we need a spin-lock in the driver is because the REG_MISC_AB register is shared between the two channels provided by one PWM controller. The only functions where REG_MISC_AB is modified are meson_pwm_enable() and meson_pwm_disable() so the register reads/writes in there need to be protected by the spin-lock. The original code also used the spin-lock to protect the values in struct meson_pwm_channel. This could be necessary if two consumers can use the same PWM channel. However, PWM core doesn't allow this so we don't need to protect the values in struct meson_pwm_channel with a lock. Fixes: 211ed630 ("pwm: Add support for Meson PWM Controller") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Michael Ellerman authored
[ Upstream commit 2b8358a9 ] The mpc85xx EDAC driver can be configured as a module but then fails to build because it uses two unexported symbols: ERROR: ".pci_find_hose_for_OF_device" [drivers/edac/mpc85xx_edac_mod.ko] undefined! ERROR: ".early_find_capability" [drivers/edac/mpc85xx_edac_mod.ko] undefined! We don't want to export those symbols just for this driver, so make the driver only configurable as a built-in. This seems to have been broken since at least c92132f5 ("edac/85xx: Add PCIe error interrupt edac support") (Nov 2013). [ bp: make it depend on EDAC=y so that the EDAC core doesn't get built as a module. ] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Johannes Thumshirn <jth@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: linuxppc-dev@ozlabs.org Cc: morbidrsa@gmail.com Link: https://lkml.kernel.org/r/20190502141941.12927-1-mpe@ellerman.id.auSigned-off-by: Sasha Levin <sashal@kernel.org>
-
Krzesimir Nowak authored
[ Upstream commit e2f7fc0a ] Commit 31fd8581 ("bpf: permits narrower load from bpf program context fields") made the verifier add AND instructions to clear the unwanted bits with a mask when doing a narrow load. The mask is computed with (1 << size * 8) - 1 where "size" is the size of the narrow load. When doing a 4 byte load of a an 8 byte field the verifier shifts the literal 1 by 32 places to the left. This results in an overflow of a signed integer, which is an undefined behavior. Typically, the computed mask was zero, so the result of the narrow load ended up being zero too. Cast the literal to long long to avoid overflows. Note that narrow load of the 4 byte fields does not have the undefined behavior, because the load size can only be either 1 or 2 bytes, so shifting 1 by 8 or 16 places will not overflow it. And reading 4 bytes would not be a narrow load of a 4 bytes field. Fixes: 31fd8581 ("bpf: permits narrower load from bpf program context fields") Reviewed-by: Alban Crequy <alban@kinvolk.io> Reviewed-by: Iago López Galeiras <iago@kinvolk.io> Signed-off-by: Krzesimir Nowak <krzesimir@kinvolk.io> Cc: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Ben Skeggs authored
[ Upstream commit d2434e4d ] Cursor position updates were accidentally causing us to attempt to interlock window with window immediate, and without a matching window immediate update, NVDisplay could hang forever in some circumstances. Fixes suspend/resume on (at least) Quadro RTX4000 (TU104). Reported-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Josh Poimboeuf authored
[ Upstream commit e6da9567 ] The ignore flag is set on fake jumps in order to keep add_jump_destinations() from setting their jump_dest, since it already got set when the fake jump was created. But using the ignore flag is a bit of a hack. It's normally used to skip validation of an instruction, which doesn't really make sense for fake jumps. Also, after the next patch, using the ignore flag for fake jumps can trigger a false "why am I validating an ignored function?" warning. Instead just add an explicit check in add_jump_destinations() to skip fake jumps. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/71abc072ff48b2feccc197723a9c52859476c068.1557766718.git.jpoimboe@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Matt Redfearn authored
[ Upstream commit 67793bd3 ] The driver currently sets register 0xfb (Low Refresh Rate) based on the value of mode->vrefresh. Firstly, this field is specified to be in Hz, but the magic numbers used by the code are Hz * 1000. This essentially leads to the low refresh rate always being set to 0x01, since the vrefresh value will always be less than 24000. Fix the magic numbers to be in Hz. Secondly, according to the comment in drm_modes.h, the field is not supposed to be used in a functional way anyway. Instead, use the helper function drm_mode_vrefresh(). Fixes: 9c8af882 ("drm: Add adv7511 encoder driver") Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Matt Redfearn <matt.redfearn@thinci.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190424132210.26338-1-matt.redfearn@thinci.comSigned-off-by: Sasha Levin <sashal@kernel.org>
-
Peteris Rudzusiks authored
[ Upstream commit c4a52d66 ] nv50_head_atomic_duplicate_state() makes a copy of nv50_head_atom struct. This patch adds copying of struct member named "or", which previously was left uninitialized in the duplicated structure. Due to this bug, incorrect nhsync and nvsync values were sometimes used. In my particular case, that lead to a mismatch between the output resolution of the graphics device (GeForce GT 630 OEM) and the reported input signal resolution on the display. xrandr reported 1680x1050, but the display reported 1280x1024. As a result of this mismatch, the output on the display looked like it was cropped (only part of the output was actually visible on the display). git bisect pointed to commit 2ca7fb5c ("drm/nouveau/kms/nv50: handle SetControlOutputResource from head"), which added the member "or" to nv50_head_atom structure, but forgot to copy it in nv50_head_atomic_duplicate_state(). Fixes: 2ca7fb5c ("drm/nouveau/kms/nv50: handle SetControlOutputResource from head") Signed-off-by: Peteris Rudzusiks <peteris.rudzusiks@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Ben Skeggs authored
[ Upstream commit a0b694d0 ] HW has error checks in place which check that pixel depth is explicitly provided on DP, while HDMI has a "default" setting that we use. In multi-display configurations with identical modelines, but different protocols (HDMI + DP, in this case), it was possible for the DP head to get swapped to the head which previously drove the HDMI output, without updating HeadSetControlOutputResource(), triggering the error check and hanging the core update. Reported-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Stephane Eranian authored
[ Upstream commit c7a28657 ] This patch fixes a restriction/bug introduced by: 583feb08 ("perf/x86/intel: Fix handling of wakeup_events for multi-entry PEBS") The original patch prevented using multi-entry PEBS when wakeup_events != 0. However given that wakeup_events is part of a union with wakeup_watermark, it means that in watermark mode, PEBS multi-entry is also disabled which is not the intent. This patch fixes this by checking is watermark mode is enabled. Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: jolsa@redhat.com Cc: kan.liang@intel.com Cc: vincent.weaver@maine.edu Fixes: 583feb08 ("perf/x86/intel: Fix handling of wakeup_events for multi-entry PEBS") Link: http://lkml.kernel.org/r/20190514003400.224340-1-eranian@google.comSigned-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Tony Lindgren authored
[ Upstream commit 48171d0e ] I noticed that we can get a -EREMOTEIO errors on at least omap4 duovero: twl6040 0-004b: Failed to write 2d = 19: -121 And then any following register access will produce errors. There 2d offset above is register ACCCTL that gets written on twl6040 powerup. With error checking added to the related regcache_sync() call, the -EREMOTEIO error is reproducable on twl6040 powerup at least duovero. To fix the error, we need to wait until twl6040 is accessible after the powerup. Based on tests on omap4 duovero, we need to wait over 8ms after powerup before register write will complete without failures. Let's also make sure we warn about possible errors too. Note that we have twl6040_patch[] reg_sequence with the ACCCTL register configuration and regcache_sync() will write the new value to ACCCTL. Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Ben Skeggs authored
[ Upstream commit 13d03e9d ] Where possible, we want the failsafe link configuration (one which won't hang the OR during modeset because of not enough bandwidth for the mode) to also be supported by the sink. This prevents "link rate unsupported by sink" messages when link training fails. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Binbin Wu authored
[ Upstream commit dad06532 ] In virtualized setup, when system reboots due to warm reset interrupt storm is seen. Call Trace: <IRQ> dump_stack+0x70/0xa5 __report_bad_irq+0x2e/0xc0 note_interrupt+0x248/0x290 ? add_interrupt_randomness+0x30/0x220 handle_irq_event_percpu+0x54/0x80 handle_irq_event+0x39/0x60 handle_fasteoi_irq+0x91/0x150 handle_irq+0x108/0x180 do_IRQ+0x52/0xf0 common_interrupt+0xf/0xf </IRQ> RIP: 0033:0x76fc2cfabc1d Code: 24 28 bf 03 00 00 00 31 c0 48 8d 35 63 77 0e 00 48 8d 15 2e 94 0e 00 4c 89 f9 49 89 d9 4c 89 d3 e8 b8 e2 01 00 48 8b 54 24 18 <48> 89 ef 48 89 de 4c 89 e1 e8 d5 97 01 00 84 c0 74 2d 48 8b 04 24 RSP: 002b:00007ffd247c1fc0 EFLAGS: 00000293 ORIG_RAX: ffffffffffffffda RAX: 0000000000000000 RBX: 00007ffd247c1ff0 RCX: 000000000003d3ce RDX: 0000000000000000 RSI: 00007ffd247c1ff0 RDI: 000076fc2cbb6010 RBP: 000076fc2cded010 R08: 00007ffd247c2210 R09: 00007ffd247c22a0 R10: 000076fc29465470 R11: 0000000000000000 R12: 00007ffd247c1fc0 R13: 000076fc2ce8e470 R14: 000076fc27ec9960 R15: 0000000000000414 handlers: [<000000000d3fa913>] idma64_irq Disabling IRQ #27 To avoid interrupt storm, set the device in reset state before bringing out the device from reset state. Changelog v2: - correct the subject line by adding "mfd: " Signed-off-by: Binbin Wu <binbin.wu@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Daniel Gomez authored
[ Upstream commit 9e364e87 ] MODULE_DEVICE_TABLE(of, <of_match_table> should be called to complete DT OF mathing mechanism and register it. Before this patch: modinfo drivers/mfd/tps65912-spi.ko | grep alias alias: spi:tps65912 After this patch: modinfo drivers/mfd/tps65912-spi.ko | grep alias alias: of:N*T*Cti,tps65912C* alias: of:N*T*Cti,tps65912 alias: spi:tps65912 Reported-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Daniel Gomez <dagmcr@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Amit Kucheria authored
[ Upstream commit fc7d18cf ] We print a calibration failure message on -EPROBE_DEFER from nvmem/qfprom as follows: [ 3.003090] qcom-tsens 4a9000.thermal-sensor: version: 1.4 [ 3.005376] qcom-tsens 4a9000.thermal-sensor: tsens calibration failed [ 3.113248] qcom-tsens 4a9000.thermal-sensor: version: 1.4 This confuses people when, in fact, calibration succeeds later when nvmem/qfprom device is available. Don't print this message on a -EPROBE_DEFER. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jiada Wang authored
[ Upstream commit 63f55fce ] Currently IRQ remains enabled after .remove, later if device is probed, IRQ is requested before .thermal_init, this may cause IRQ function be called before device is initialized. this patch disables interrupt in .remove, to ensure irq function only be called after device is fully initialized. Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Cyrill Gorcunov authored
[ Upstream commit a9e73998 ] While validating new map we require the @start_data to be strictly less than @end_data, which is fine for regular applications (this is why this nit didn't trigger for that long). These members are set from executable loaders such as elf handers, still it is pretty valid to have a loadable data section with zero size in file, in such case the start_data is equal to end_data once kernel loader finishes. As a result when we're trying to restore such programs the procedure fails and the kernel returns -EINVAL. From the image dump of a program: | "mm_start_code": "0x400000", | "mm_end_code": "0x8f5fb4", | "mm_start_data": "0xf1bfb0", | "mm_end_data": "0xf1bfb0", Thus we need to change validate_prctl_map from strictly less to less or equal operator use. Link: http://lkml.kernel.org/r/20190408143554.GY1421@uranus.lan Fixes: f606b77f ("prctl: PR_SET_MM -- introduce PR_SET_MM_MAP operation") Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Andrey Vagin <avagin@gmail.com> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Qian Cai authored
[ Upstream commit 745e1014 ] "cat /proc/slab_allocators" could hang forever on SMP machines with kmemleak or object debugging enabled due to other CPUs running do_drain() will keep making kmemleak_object or debug_objects_cache dirty and unable to escape the first loop in leaks_show(), do { set_store_user_clean(cachep); drain_cpu_caches(cachep); ... } while (!is_store_user_clean(cachep)); For example, do_drain slabs_destroy slab_destroy kmem_cache_free __cache_free ___cache_free kmemleak_free_recursive delete_object_full __delete_object put_object free_object_rcu kmem_cache_free cache_free_debugcheck --> dirty kmemleak_object One approach is to check cachep->name and skip both kmemleak_object and debug_objects_cache in leaks_show(). The other is to set store_user_clean after drain_cpu_caches() which leaves a small window between drain_cpu_caches() and set_store_user_clean() where per-CPU caches could be dirty again lead to slightly wrong information has been stored but could also speed up things significantly which sounds like a good compromise. For example, # cat /proc/slab_allocators 0m42.778s # 1st approach 0m0.737s # 2nd approach [akpm@linux-foundation.org: tweak comment] Link: http://lkml.kernel.org/r/20190411032635.10325-1-cai@lca.pw Fixes: d31676df ("mm/slab: alternative implementation for DEBUG_SLAB_LEAK") Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Yue Hu authored
[ Upstream commit f0fd5050 ] If not find zero bit in find_next_zero_bit(), it will return the size parameter passed in, so the start bit should be compared with bitmap_maxno rather than cma->count. Although getting maxchunk is working fine due to zero value of order_per_bit currently, the operation will be stuck if order_per_bit is set as non-zero. Link: http://lkml.kernel.org/r/20190319092734.276-1-zbestahu@gmail.comSigned-off-by: Yue Hu <huyue2@yulong.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Joe Perches <joe@perches.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Safonov <d.safonov@partner.samsung.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Aneesh Kumar K.V authored
[ Upstream commit 024eee0e ] MADV_DONTNEED is handled with mmap_sem taken in read mode. We call page_mkclean without holding mmap_sem. MADV_DONTNEED implies that pages in the region are unmapped and subsequent access to the pages in that range is handled as a new page fault. This implies that if we don't have parallel access to the region when MADV_DONTNEED is run we expect those range to be unallocated. w.r.t page_mkclean() we need to make sure that we don't break the MADV_DONTNEED semantics. MADV_DONTNEED check for pmd_none without holding pmd_lock. This implies we skip the pmd if we temporarily mark pmd none. Avoid doing that while marking the page clean. Keep the sequence same for dax too even though we don't support MADV_DONTNEED for dax mapping The bug was noticed by code review and I didn't observe any failures w.r.t test run. This is similar to commit 58ceeb6b Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Date: Thu Apr 13 14:56:26 2017 -0700 thp: fix MADV_DONTNEED vs. MADV_FREE race commit ced10803 Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Date: Thu Apr 13 14:56:20 2017 -0700 thp: fix MADV_DONTNEED vs. numa balancing race Link: http://lkml.kernel.org/r/20190321040610.14226-1-aneesh.kumar@linux.ibm.comSigned-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc:"Kirill A . Shutemov" <kirill@shutemov.name> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Yue Hu authored
[ Upstream commit 2b59e01a ] Currently one bit in cma bitmap represents number of pages rather than one page, cma->count means cma size in pages. So to find available pages via find_next_zero_bit()/find_next_bit() we should use cma size not in pages but in bits although current free pages number is correct due to zero value of order_per_bit. Once order_per_bit is changed the bitmap status will be incorrect. The size input in cma_debug_show_areas() is not correct. It will affect the available pages at some position to debug the failure issue. This is an example with order_per_bit = 1 Before this change: [ 4.120060] cma: number of available pages: 1@93+4@108+7@121+7@137+7@153+7@169+7@185+7@201+3@213+3@221+3@229+3@237+3@245+3@253+3@261+3@269+3@277+3@285+3@293+3@301+3@309+3@317+3@325+19@333+15@369+512@512=> 638 free of 1024 total pages After this change: [ 4.143234] cma: number of available pages: 2@93+8@108+14@121+14@137+14@153+14@169+14@185+14@201+6@213+6@221+6@229+6@237+6@245+6@253+6@261+6@269+6@277+6@285+6@293+6@301+6@309+6@317+6@325+38@333+30@369=> 252 free of 1024 total pages Obviously the bitmap status before is incorrect. Link: http://lkml.kernel.org/r/20190320060829.9144-1-zbestahu@gmail.comSigned-off-by: Yue Hu <huyue2@yulong.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Laura Abbott <labbott@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Baoquan He authored
[ Upstream commit d3ba3ae1 ] In node_states_check_changes_online(), N_HIGH_MEMORY is used to substitute ZONE_HIGHMEM directly. This is not right. N_HIGH_MEMORY is to mark the memory state of node. Here zone index is checked, which should be compared with 'ZONE_HIGHMEM' accordingly. Replace it with ZONE_HIGHMEM. This is a code cleanup - no known runtime effects. Link: http://lkml.kernel.org/r/20190320080732.14933-1-bhe@redhat.com Fixes: 8efe33f4 ("mm/memory_hotplug.c: simplify node_states_check_changes_online") Signed-off-by: Baoquan He <bhe@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Qian Cai authored
[ Upstream commit dd7ef7bd ] In a low-memory situation, cc->fast_search_fail can keep increasing as it is unable to find an available page to isolate in fast_isolate_freepages(). As the result, it could trigger an error below, so just compare with the maximum bits can be shifted first. UBSAN: Undefined behaviour in mm/compaction.c:1160:30 shift exponent 64 is too large for 64-bit type 'unsigned long' CPU: 131 PID: 1308 Comm: kcompactd1 Kdump: loaded Tainted: G W L 5.0.0+ #17 Call trace: dump_backtrace+0x0/0x450 show_stack+0x20/0x2c dump_stack+0xc8/0x14c __ubsan_handle_shift_out_of_bounds+0x7e8/0x8c4 compaction_alloc+0x2344/0x2484 unmap_and_move+0xdc/0x1dbc migrate_pages+0x274/0x1310 compact_zone+0x26ec/0x43bc kcompactd+0x15b8/0x1a24 kthread+0x374/0x390 ret_from_fork+0x10/0x18 [akpm@linux-foundation.org: code cleanup] Link: http://lkml.kernel.org/r/20190320203338.53367-1-cai@lca.pw Fixes: 70b44595 ("mm, compaction: use free lists to quickly locate a migration source") Signed-off-by: Qian Cai <cai@lca.pw> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Christoph Hellwig authored
[ Upstream commit 54c7a891 ] Patch series "initramfs tidyups". I've spent some time chasing down behavior in initramfs and found plenty of opportunity to improve the code. A first stab on that is contained in this series. This patch (of 7): We free the initrd memory for all successful or error cases except for the case where opening /initrd.image fails, which looks like an oversight. Steven said: : This also changes the behaviour when CONFIG_INITRAMFS_FORCE is enabled : - specifically it means that the initrd is freed (previously it was : ignored and never freed). But that seems like reasonable behaviour and : the previous behaviour looks like another oversight. Link: http://lkml.kernel.org/r/20190213174621.29297-3-hch@lst.deSigned-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Steven Price <steven.price@arm.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Yue Hu authored
[ Upstream commit 1df3a339 ] f022d8cb ("mm: cma: Don't crash on allocation if CMA area can't be activated") fixes the crash issue when activation fails via setting cma->count as 0, same logic exists if bitmap allocation fails. Link: http://lkml.kernel.org/r/20190325081309.6004-1-zbestahu@gmail.comSigned-off-by: Yue Hu <huyue2@yulong.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Linxu Fang authored
[ Upstream commit 299c83dc ] 342332e6 ("mm/page_alloc.c: introduce kernelcore=mirror option") and later patches rewrote the calculation of node spanned pages. e506b996 ("mem-hotplug: fix node spanned pages when we have a movable node"), but the current code still has problems, When we have a node with only zone_movable and the node id is not zero, the size of node spanned pages is double added. That's because we have an empty normal zone, and zone_start_pfn or zone_end_pfn is not between arch_zone_lowest_possible_pfn and arch_zone_highest_possible_pfn, so we need to use clamp to constrain the range just like the commit <96e907d1> (bootmem: Reimplement __absent_pages_in_range() using for_each_mem_pfn_range()). e.g. Zone ranges: DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000023fffffff] Movable zone start for each node Node 0: 0x0000000100000000 Node 1: 0x0000000140000000 Early memory node ranges node 0: [mem 0x0000000000001000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x00000000bffdffff] node 0: [mem 0x0000000100000000-0x000000013fffffff] node 1: [mem 0x0000000140000000-0x000000023fffffff] node 0 DMA spanned:0xfff present:0xf9e absent:0x61 node 0 DMA32 spanned:0xff000 present:0xbefe0 absent:0x40020 node 0 Normal spanned:0 present:0 absent:0 node 0 Movable spanned:0x40000 present:0x40000 absent:0 On node 0 totalpages(node_present_pages): 1048446 node_spanned_pages:1310719 node 1 DMA spanned:0 present:0 absent:0 node 1 DMA32 spanned:0 present:0 absent:0 node 1 Normal spanned:0x100000 present:0x100000 absent:0 node 1 Movable spanned:0x100000 present:0x100000 absent:0 On node 1 totalpages(node_present_pages): 2097152 node_spanned_pages:2097152 Memory: 6967796K/12582392K available (16388K kernel code, 3686K rwdata, 4468K rodata, 2160K init, 10444K bss, 5614596K reserved, 0K cma-reserved) It shows that the current memory of node 1 is double added. After this patch, the problem is fixed. node 0 DMA spanned:0xfff present:0xf9e absent:0x61 node 0 DMA32 spanned:0xff000 present:0xbefe0 absent:0x40020 node 0 Normal spanned:0 present:0 absent:0 node 0 Movable spanned:0x40000 present:0x40000 absent:0 On node 0 totalpages(node_present_pages): 1048446 node_spanned_pages:1310719 node 1 DMA spanned:0 present:0 absent:0 node 1 DMA32 spanned:0 present:0 absent:0 node 1 Normal spanned:0 present:0 absent:0 node 1 Movable spanned:0x100000 present:0x100000 absent:0 On node 1 totalpages(node_present_pages): 1048576 node_spanned_pages:1048576 memory: 6967796K/8388088K available (16388K kernel code, 3686K rwdata, 4468K rodata, 2160K init, 10444K bss, 1420292K reserved, 0K cma-reserved) Link: http://lkml.kernel.org/r/1554178276-10372-1-git-send-email-fanglinxu@huawei.comSigned-off-by: Linxu Fang <fanglinxu@huawei.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-