- 22 Mar, 2018 40 commits
-
-
Mintz, Yuval authored
[ Upstream commit 2f782278 ] When qedr is enabled, qed would try dividing the msi-x vectors between L2 and RoCE, starting with L2 and providing it with sufficient vectors for its queues. Problem is qed would also do that for storage partitions, and as those don't need queues it would lead qed to award those partitions with 0 msi-x vectors, causing them to believe theye're using INTa and preventing them from operating. Fixes: 51ff1725 ("qed: Add support for RoCE hw init") Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mauricio Faria de Oliveira authored
[ Upstream commit 75106523 ] The commit 08024885 ("ses: Add power_status to SES device slot") introduced the 'power_status' attribute to enclosure components and the associated callbacks. There are 2 callbacks available to get the power status of a device: 1) ses_get_power_status() for 'struct enclosure_component_callbacks' 2) get_component_power_status() for the sysfs device attribute (these are available for kernel-space and user-space, respectively.) However, despite both methods being available to get power status on demand, that commit also introduced a call to get power status in ses_enclosure_data_process(). This dramatically increased the total probe time for SCSI devices on larger configurations, because ses_enclosure_data_process() is called several times during the SCSI devices probe and loops over the component devices (but that is another problem, another patch). That results in a tremendous continuous hammering of SCSI Receive Diagnostics commands to the enclosure-services device, which does delay the total probe time for the SCSI devices __significantly__: Originally, ~34 minutes on a system attached to ~170 disks: [ 9214.490703] mpt3sas version 13.100.00.00 loaded ... [11256.580231] scsi 17:0:177:0: qdepth(16), tagged(1), simple(0), ordered(0), scsi_level(6), cmd_que(1) With this patch, it decreased to ~2.5 minutes -- a 13.6x faster [ 1002.992533] mpt3sas version 13.100.00.00 loaded ... [ 1151.978831] scsi 11:0:177:0: qdepth(16), tagged(1), simple(0), ordered(0), scsi_level(6), cmd_que(1) Back to the commit discussion.. on the ses_get_power_status() call introduced in ses_enclosure_data_process(): impact of removing it. That may possibly be in place to initialize the power status value on device probe. However, those 2 functions available to retrieve that value _do_ automatically refresh/update it. So the potential benefit would be a direct access of the 'power_status' field which does not use the callbacks... But the only reader of 'struct enclosure_component::power_status' is the get_component_power_status() callback for sysfs attribute, and it _does_ check for and call the .get_power_status callback, (which indeed is defined and implemented by that commit), so the power status value is, again, automatically updated. So, the remaining potential for a direct/non-callback access to the power_status attribute would be out-of-tree modules -- well, for those, if they are for whatever reason interested in values that are set during device probe and not up-to-date by the time they need it.. well, that would be curious. Well, to handle that more properly, set the initial power state value to '-1' (i.e., uninitialized) instead of '1' (power 'on'), and check for it in that callback which may do an direct access to the field value _if_ a callback function is not defined. Signed-off-by:
Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Fixes: 08024885 ("ses: Add power_status to SES device slot") Reviewed-by:
Dan Williams <dan.j.williams@intel.com> Reviewed-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Thor Thayer authored
[ Upstream commit 25b223dd ] The peripherals' RAS functionality only exist on the Arria10 SoCFPGA. The Cyclone5 initialization generates EDAC warnings when the peripherals aren't found in the device tree. Fix by checking for Arria10 in the init functions. Signed-off-by:
Thor Thayer <thor.thayer@linux.intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1491415262-5018-1-git-send-email-thor.thayer@linux.intel.comSigned-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Phil Turnbull authored
[ Upstream commit 540fca35 ] FM10K_REMOVED expects a hardware address, not a 'struct fm10k_hw'. Fixes: 5cb8db4a ("fm10k: Add support for VF") Signed-off-by:
Phil Turnbull <phil.turnbull@oracle.com> Tested-by:
Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Takashi Sakamoto authored
[ Upstream commit 8820a4cf ] At a commit 9dc5d31c ("ALSA: firewire-digi00x: handle MIDI messages in isochronous packets"), a functionality to handle MIDI messages on isochronous packet was supported. But this includes some of my misunderstanding. This commit is to fix them. For digi00x series, first data channel of data blocks in rx/tx packet includes MIDI messages. The data channel has 0x80 in 8 bit of its MSB, however it's against IEC 61883-6. Unique data format is applied: - Upper 4 bits of LSB represent port number. - 0x0: port 1. - 0x2: port 2. - 0xe: console port. - Lower 4 bits of LSB represent the number of included MIDI message bytes; 0x0/0x1/0x2. - Two bytes of middle of this data channel have MIDI bytes. Especially, MIDI messages from/to console surface are also transferred by isochronous packets, as well as physical MIDI ports. Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Sakamoto authored
[ Upstream commit 13e005f9 ] Digi00x series includes two types of unit; rack and console. As long as reading information on config rom of Digi 002 console, 'MODEL_ID' field has a different value from the one on Digi 002 rack. We've already got a test report from users with Digi 003 rack. We can assume that console type and rack type has different value in the field. This commit adds a device entry for console type. For following commits, this commit also adds a member to 'struct snd_digi00x' to identify console type. $ cd linux-firewire-utils/src $ python2 ./crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 0404f9d0 bus_info_length 4, crc_length 4, crc 63952 404 31333934 bus_name "1394" 408 60647002 irmc 0, cmc 1, isc 1, bmc 0, cyc_clk_acc 100, max_rec 7 (256) 40c 00a07e00 company_id 00a07e | 410 00a30000 device_id 0000a30000 | EUI-64 00a07e0000a30000 root directory ----------------------------------------------------------------- 414 00058a39 directory_length 5, crc 35385 418 0c0043a0 node capabilities 41c 04000001 hardware version 420 0300a07e vendor 424 81000007 --> descriptor leaf at 440 428 d1000001 --> unit directory at 42c unit directory at 42c ----------------------------------------------------------------- 42c 00046674 directory_length 4, crc 26228 430 120000a3 specifier id 434 13000001 version 438 17000001 model 43c 81000007 --> descriptor leaf at 458 descriptor leaf at 440 ----------------------------------------------------------------- 440 00055913 leaf_length 5, crc 22803 444 000050f2 descriptor_type 00, specifier_ID 50f2 448 80000000 44c 44696769 450 64657369 454 676e0000 descriptor leaf at 458 ----------------------------------------------------------------- 458 0004a6fd leaf_length 4, crc 42749 45c 00000000 textual descriptor 460 00000000 minimal ASCII 464 44696769 "Digi" 468 20303032 " 002" Signed-off-by:
-
Easwar Hariharan authored
[ Upstream commit fb897ad3 ] Attempting to read the status of a QSFP cable creates noise in the logs and misses out on setting an appropriate Offline/Disabled Reason if the cable is not plugged in. Check for this prior to attempting the read and attendant retries. Fixes: 673b975f ("IB/hfi1: Add QSFP sanity pre-check") Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Javier Martinez Canillas authored
[ Upstream commit 7b87463e ] The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Before this patch: $ modinfo sound/soc/codecs/snd-soc-rt5677.ko | grep alias alias: i2c:RT5677CE:00 alias: i2c:rt5676 alias: i2c:rt5677 After this patch: $ modinfo sound/soc/codecs/snd-soc-rt5677.ko | grep alias alias: of:N*T*Crealtek,rt5677C* alias: of:N*T*Crealtek,rt5677 alias: i2c:RT5677CE:00 alias: i2c:rt5676 alias: i2c:rt5677 Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Jan Kara authored
[ Upstream commit 71b0576b ] Currently canceling of delayed work that flushes old data using cancel_old_flush() does not prevent work from being requeued. Thus in theory new work can be queued after cancel_old_flush() from reiserfs_freeze() has run. This will become larger problem once flush_old_commits() can requeue the work itself. Fix the problem by recording in sbi->work_queue that flushing work is canceled and should not be requeued. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit ebf06af5 ] The X2 crystal oscillator on the Koelsch development board provides a 74.25 MHz clock, not a 148.5 MHz clock. Fixes: cd21cb46 ("ARM: shmobile: koelsch: Add DU external pixel clocks to DT") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Laurent Pinchart authored
[ Upstream commit 6dd47cfd ] The driver currently handles vblank events only when updating planes on a CRTC. The atomic update API however allows requesting an event when disabling a CRTC. This currently leads to event objects being leaked in the kernel and to events not being sent out. Fix it. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Petr Mladek authored
[ Upstream commit 257ab443 ] Some console drivers code calls console_conditional_schedule() that looks at @console_may_schedule. The value must be cleared when the drivers are called from console_unlock() with interrupts disabled. But rescheduling is fine when the same code is called, for example, from tty operations where the console semaphore is taken via console_lock(). This is why @console_may_schedule is cleared before calling console drivers. The original value is stored to decide if we could sleep between lines. Now, @console_may_schedule is not cleared when we call console_trylock() and jump back to the "again" goto label. This has become a problem, since the commit 6b97a20d ("printk: set may_schedule for some of console_trylock() callers"). @console_may_schedule might get enabled now. There is also the opposite problem. console_lock() can be called only from preemptive context. It can always enable scheduling in the console code. But console_trylock() is not able to detect it when CONFIG_PREEMPT_COUNT is disabled. Therefore we should use the original @console_may_schedule value after re-acquiring the console semaphore in console_unlock(). This patch solves both problems by moving the "again" goto label. Alternative solution was to clear and restore the value around call_console_drivers(). Then console_conditional_schedule() could be used also inside console_unlock(). But there was a potential race with console_flush_on_panic() as reported by Sergey Senozhatsky. That function should be called only where there is only one CPU and with interrupts disabled. But better be on the safe side because stopping CPUs might fail. Fixes: 6b97a20d ("printk: set may_schedule for some of console_trylock() callers") Link: http://lkml.kernel.org/r/1490372045-22288-1-git-send-email-pmladek@suse.comSuggested-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: linux-fbdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
Petr Mladek <pmladek@suse.com> Signed-off-by:
-
Peter Zijlstra authored
[ Upstream commit e0aad5b4 ] rt_mutex_waiter::prio is a copy of task_struct::prio which is updated during the PI chain walk, such that the PI chain order isn't messed up by (asynchronous) task state updates. Currently rt_mutex_waiter_less() uses task state for deadline tasks; this is broken, since the task state can, as said above, change asynchronously, causing the RB tree order to change without actual tree update -> FAIL. Fix this by also copying the deadline into the rt_mutex_waiter state and updating it along with its prio field. Ideally we would also force PI chain updates whenever DL tasks update their deadline parameter, but for first approximation this is less broken than it was. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: juri.lelli@arm.com Cc: bigeasy@linutronix.de Cc: xlpang@redhat.com Cc: rostedt@goodmis.org Cc: mathieu.desnoyers@efficios.com Cc: jdesfossez@efficios.com Cc: bristot@redhat.com Link: http://lkml.kernel.org/r/20170323150216.403992539@infradead.orgSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Michal Kalderon authored
[ Upstream commit 44531ba4 ] When configuring the HW timers block we should set the number of CIDs up until the last CID that require timers, instead of only those CIDs whose protocol needs timers support. Today, the protocols that require HW timers' support have their CIDs before any other protocol, but that would change in future [when we add iWARP support]. Signed-off-by:
Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by:
-
Andrew Lunn authored
[ Upstream commit d39004ab ] Breaking the include loop netdevice.h, dsa.h, devlink.h broke this driver, it depends on includes brought in by these headers. Adding linux/of.h fixes it. Fixes: ed0e39e97d34 ("net: break include loop netdevice.h, dsa.h, devlink.h") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
lipeng authored
[ Upstream commit 64ec10dc ] This patch fixes below ethtool configuration error: localhost:~ # ethtool -X eth0 hkey XX:XX:XX... Cannot set Rx flow hash configuration: Operation not supported Signed-off-by:
lipeng <lipeng321@huawei.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
-
Anton Blanchard authored
[ Upstream commit a7a9dcd8 ] Early on in do_page_fault() we call store_updates_sp(), regardless of the type of exception. For an instruction miss this doesn't make sense, because we only use this information to detect if a data miss is the result of a stack expansion instruction or not. Worse still, it results in a data miss within every userspace instruction miss handler, because we try and load the very instruction we are about to install a pte for! A simple exec microbenchmark runs 6% faster on POWER8 with this fix: #include <stdlib.h> #include <stdio.h> #include <unistd.h> int main(int argc, char *argv[]) { unsigned long left = atol(argv[1]); char leftstr[16]; if (left-- == 0) return 0; sprintf(leftstr, "%ld", left); execlp(argv[0], argv[0], leftstr, NULL); perror("exec failed\n"); return 0; } Pass the number of iterations on the command line (eg 10000) and time how long it takes to execute. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 1cd90280 ] The SSI-ALL gate clock is located in between the P clock and the individual SSI[0-9] clocks, hence the former should be listed as their parent. Fixes: 072d3265 ("ARM: dts: r8a7793: add MSTP10 clocks to device tree") Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 16fe68dc ] The SSI-ALL gate clock is located in between the P clock and the individual SSI[0-9] clocks, hence the former should be listed as their parent. Fixes: ee914152 ("ARM: shmobile: r8a7791: add MSTP10 support on DTSI") Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit d13d4e06 ] The SSI-ALL gate clock is located in between the P clock and the individual SSI[0-9] clocks, hence the former should be listed as their parent. Fixes: bcde3722 ("ARM: shmobile: r8a7790: add MSTP10 support on DTSI") Signed-off-by:
-
Chris Brandt authored
[ Upstream commit 91a7c50c ] Technically, the Ethernet block is run off the 133MHz Bus (B) clock, not the 33MHz Peripheral 0 (P0) clock. Fixes: 969244f9 ("ARM: dts: r7s72100: add ethernet clock to device tree") Signed-off-by:
Chris Brandt <chris.brandt@renesas.com> Reviewed-by:
-
Andrey Rusalin authored
[ Upstream commit 068a496c ] Change order of free_irq and dev unregistration. It fixes situation when device already unregistered and an interrupt happens and nobody can handle it. Signed-off-by:
Andrey Rusalin <arusalin@dev.rtsoft.ru> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit ca42fb9e ] The nci_spi_send() function calls kfree_skb(skb) on both error and success so this extra kfree_skb() is a double free. Fixes: caf6e49b ("NFC: nfcmrvl: add spi driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Tobias Klauser authored
[ Upstream commit d916d923 ] Including linux/unaligned/access_ok.h causes the allmodconfig build on ia64 (and maybe others) to fail with the following warnings: include/linux/unaligned/access_ok.h:7:19: error: redefinition of 'get_unaligned_le16' include/linux/unaligned/access_ok.h:12:19: error: redefinition of 'get_unaligned_le32' include/linux/unaligned/access_ok.h:17:19: error: redefinition of 'get_unaligned_le64' include/linux/unaligned/access_ok.h:22:19: error: redefinition of 'get_unaligned_be16' include/linux/unaligned/access_ok.h:27:19: error: redefinition of 'get_unaligned_be32' include/linux/unaligned/access_ok.h:32:19: error: redefinition of 'get_unaligned_be64' include/linux/unaligned/access_ok.h:37:20: error: redefinition of 'put_unaligned_le16' include/linux/unaligned/access_ok.h:42:20: error: redefinition of 'put_unaligned_le32' include/linux/unaligned/access_ok.h:42:20: error: redefinition of 'put_unaligned_le64' include/linux/unaligned/access_ok.h:42:20: error: redefinition of 'put_unaligned_be16' include/linux/unaligned/access_ok.h:42:20: error: redefinition of 'put_unaligned_be32' include/linux/unaligned/access_ok.h:42:20: error: redefinition of 'put_unaligned_be64' Fix these by including asm/unaligned.h instead and leave it up to the architecture to decide how to implement unaligned accesses. Fixes: 3194c687 ("NFC: nfcmrvl: add firmware download support") Reported-by:
kbuild test robot <fengguang.wu@intel.com> Link: https://lkml.org/lkml/2016/10/22/247 Cc: Vincent Cuissard <cuissard@marvell.com> Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
Felix Manlunas authored
[ Upstream commit d6acfeb1 ] vxlan dev currently ignores lowerdev's gso_max_size, which adversely affects TSO performance of liquidio if it's the lowerdev. Egress TCP packets' skb->len often exceed liquidio's advertised gso_max_size. This may happen on other NIC drivers. Fix it by assigning lowerdev's gso_max_size to that of vxlan dev. Might as well do likewise for gso_max_segs. Single flow TSO throughput of liquidio as lowerdev (using iperf3): Before the patch: 139 Mbps After the patch : 8.68 Gbps Percent increase: 6,144 % Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
Satanand Burla <satananda.burla@cavium.com> Signed-off-by:
-
Sinclair Yeh authored
[ Upstream commit aa74f068 ] 1. When unsetting a mode, num_connector should be set to zero 2. The pixel_format field needs to be initialized as newer DRM internal functions checks this field 3. Take the drm_modeset_lock_all() because vmw_fb_kms_detach() can change current mode Signed-off-by:
Sinclair Yeh <syeh@vmware.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Samuel Thibault authored
[ Upstream commit 2ed2b862 ] commit bbeddf52 ("printk: move braille console support into separate braille.[ch] files") introduced _braille_console_setup() to outline the braille initialization code. There was however some confusion over the value it was supposed to return. commit 2cfe6c4a ("printk: Fix return of braille_register_console()") tried to fix it but failed to. This fixes and documents the returned value according to the use in printk.c: non-zero return means a parsing error, and thus this console configuration should be ignored. Signed-off-by:
Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Aleksey Makarov <aleksey.makarov@linaro.org> Cc: Joe Perches <joe@perches.com> Cc: Ming Lei <ming.lei@canonical.com> Cc: Steven Rostedt <rostedt@goodmis.org> Acked-by:
-
Aneesh Kumar K.V authored
[ Upstream commit a525108c ] Without this if firmware reports 1MB page size support we will crash trying to use 1MB as hugetlb page size. echo 300 > /sys/kernel/mm/hugepages/hugepages-1024kB/nr_hugepages kernel BUG at ./arch/powerpc/include/asm/hugetlb.h:19! ..... .... [c0000000e2c27b30] c00000000029dae8 .hugetlb_fault+0x638/0xda0 [c0000000e2c27c30] c00000000026fb64 .handle_mm_fault+0x844/0x1d70 [c0000000e2c27d70] c00000000004805c .do_page_fault+0x3dc/0x7c0 [c0000000e2c27e30] c00000000000ac98 handle_page_fault+0x10/0x30 With fix, we don't enable 1MB as hugepage size. bash-4.2# cd /sys/kernel/mm/hugepages/ bash-4.2# ls hugepages-16384kB hugepages-16777216kB Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Manish Jaggi authored
[ Upstream commit b77d537d ] Only apply the Cavium ACS quirk to devices with ID in the range 0xa000-0xa0ff. These are the on-chip PCI devices for CN81xx/CN83xx/CN88xx. Fixes: b404bcfb ("PCI: Add ACS quirk for all Cavium devices") Reported-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
Manish Jaggi <mjaggi@cavium.com> Acked-by:
David Daney <david.daney@cavium.com> Acked-by:
-
Eric Dumazet authored
[ Upstream commit 142c6594 ] Some device drivers reset their stats at down/up events, possibly fooling bonding stats, since they operate with relative deltas. It is nearly not possible to fix drivers, since some of them compute the tx/rx counters based on per rx/tx queue stats, and the queues can be reconfigured (ethtool -L) between the down/up sequence. Lets avoid accumulating 'negative' values that render bonding stats useless. It is better to lose small deltas, assuming the bonding stats are fetched at a reasonable frequency. Fixes: 5f0c5f73 ("bonding: make global bonding stats more reliable") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Nicolai Hähnle authored
[ Upstream commit c2c139cf ] Fixes a potential race condition in amdgpu that looks as follows: Task 1: attempt ttm_bo_init, but ttm_bo_validate fails Task 1: add BO to global list anyway Task 2: grabs hold of the BO, waits on its reservation lock Task 1: releases its reference of the BO; never gives up the reservation lock The patch "drm/amdgpu: fix a potential deadlock in amdgpu_bo_create_restricted()" attempts to fix that by releasing the reservation lock in amdgpu code; unfortunately, it introduces a use-after-free when this race _doesn't_ happen. This patch should fix the race properly by never adding the BO to the global list in the first place. Cc: zhoucm1 <david1.zhou@amd.com> Signed-off-by:
Nicolai Hähnle <nicolai.haehnle@amd.com> Tested-by:
Samuel Pitoiset <samuel.pitoiset@gmail.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Jaegeuk Kim authored
[ Upstream commit c13ff37e ] - has_not_enough_free_secs node_secs: 0 dent_secs: 0 freed:0 free_segments:103 reserved:104 - f2fs_gc - get_victim_by_default alloc_mode 0, gc_mode 1, max_search 2672, offset 4654, ofs_unit 1 - do_garbage_collect start_segno 3976, end_segno 3977 type 0 - is_alive nid 22797, blkaddr 2131882, ofs_in_node 0, version 0x8/0x0 - gc_data_segment 766, segno 3976, block 512/426 not alive So, this patch fixes subtle corrupted case where node version does not match to summary version which results in infinite loop by gc. Reported-by:
Yunlei He <heyunlei@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit fd2b2975 ] Which may happen when we start a tracing session and a thread is waiting for something like "poll" to return, in which case we better print "?" both for the syscall entry timestamp and for the duration. E.g.: Tracing existing mutt session: # perf trace -p `pidof mutt` ? ( ? ): mutt/17135 ... [continued]: poll()) = 1 0.027 ( 0.013 ms): mutt/17135 read(buf: 0x7ffcb3c42cef, count: 1) = 1 0.047 ( 0.008 ms): mutt/17135 poll(ufds: 0x7ffcb3c42c50, nfds: 1, timeout_msecs: 1000) = 1 0.059 ( 0.008 ms): mutt/17135 read(buf: 0x7ffcb3c42cef, count: 1) = 1 <SNIP> Before it would print a large number because we'd do: ttrace->entry_time - trace->base_time And entry_time would be 0, while base_time would be the timestamp for the first event 'perf trace' reads, oops. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Claudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-wbcb93ofva2qdjd5ltn5eeqq@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Matthias Kaehlcke authored
[ Upstream commit fd086045 ] Commit 26988efe ("regulator: core: Allow to get voltage count and list from parent") introduces the propagation of the parent voltage count and list for regulators that don't provide this information themselves. The goal is to support simple switch regulators, however as a side effect normal continuous regulators can leak details of their supplies and provide consumers with inconsistent information. Limit the propagation of the voltage count and list to switch regulators. Fixes: 26988efe ("regulator: core: Allow to get voltage count and list from parent") Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
-
Shaohua Li authored
[ Upstream commit 06cceedc ] cgroup could be throttled to a limit but when all cgroups cross high limit, queue enters a higher state and so the group should be throttled to a higher limit. It's possible the cgroup is sleeping because of throttle and other cgroups don't dispatch IO any more. In this case, nobody can trigger current downgrade/upgrade logic. To fix this issue, we could either set up a timer to wakeup the cgroup if other cgroups are idle or make sure this cgroup doesn't sleep too long. Setting up a timer means we must change the timer very frequently. This patch chooses the latter. Making cgroup sleep time not too big wouldn't change cgroup bps/iops, but could make it wakeup more frequently, which isn't a big issue because throtl_slice * 8 is already quite big. Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 403fe77e ] The second channel of the display unit uses a different module clock than the first channel. Fixes: 84e734f4 ("ARM: dts: silk: add DU DT support") Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 89675f36 ] The second channel of the display unit uses a different module clock than the first channel. Fixes: 46c4f13d ("ARM: shmobile: r8a7794: Add DU node to device tree") Signed-off-by:
-
Geert Uytterhoeven authored
commit 1764f808 upstream. Add the missing module clock for the second channel of the display unit. Signed-off-by:
-
Takashi Sakamoto authored
[ Upstream commit 2128f78f ] In IEC 61883-1, when two quadlets CIP header is used, the most significant bit in second CIP header stands. However, packets from units with MOTU protocol version 3 have a quirk without this flag. Current packet streaming layer handles this as protocol error. This commit adds a new enumeration constant for this quirk, to handle MOTU protocol version 3. Signed-off-by:
-
Kirill A. Shutemov authored
[ Upstream commit 591a3d7c ] 0day testing by Fengguang Wu triggered this crash while running Trinity: kernel BUG at include/linux/pagemap.h:151! ... CPU: 0 PID: 458 Comm: trinity-c0 Not tainted 4.11.0-rc2-00251-g2947ba05 #1 ... Call Trace: __get_user_pages_fast() get_user_pages_fast() get_futex_key() futex_requeue() do_futex() SyS_futex() do_syscall_64() entry_SYSCALL64_slow_path() It' VM_BUG_ON() due to false-negative in_atomic(). We call page_cache_get_speculative() with disabled local interrupts. It should be atomic enough. So let's check for disabled interrupts in the VM_BUG_ON() condition too, to resolve this. ( This got triggered by the conversion of the x86 GUP code to the generic GUP code. ) Reported-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: LKP <lkp@01.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20170324114709.pcytvyb3d6ajux33@black.fi.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
