Signed-off-by: Lucas Tanure <tanure@linux.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull HID subsystem fixes from Jiri Kosina:

 - syzkaller-reported error handling fixes in various drivers, from
   various people

 - increase of HID report buffer size to 8K, which is apparently needed
   by certain modern devices

 - a few new device-ID-specific fixes / quirks

 - battery charging status reporting fix in logitech-hidpp, from Filipe
   Laíns

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: hid-bigbenff: fix race condition for scheduled work during removal
  HID: hid-bigbenff: call hid_hw_stop() in case of error
  HID: hid-bigbenff: fix general protection fault caused by double kfree
  HID: i2c-hid: add Trekstor Surfbook E11B to descriptor override
  HID: alps: Fix an error handling path in 'alps_input_configured()'
  HID: hiddev: Fix race in in hiddev_disconnect()
  HID: core: increase HID report buffer size to 8KiB
  HID: core: fix off-by-one memset in hid_report_raw_event()
  HID: apple: Add support for recent firmware on Magic Keyboards
  HID: ite: Only bind to keyboard USB interface on Acer SW5-012 keyboard dock
  HID: logitech-hidpp: BatteryVoltage: only read chargeStatus if extPower is active

Pull documentation fixes from Jonathan Corbet:
 "A pair of docs-build fixes"

* tag 'docs-5.6-fixes' of git://git.lwn.net/linux:
  docs: Fix empty parallelism argument
  docs: remove MPX from the x86 toc

Pull audit fixes from Paul Moore:
 "Two fixes for problems found by syzbot:

   - Moving audit filter structure fields into a union caused some
     problems in the code which populates that filter structure.

     We keep the union (that idea is a good one), but we are fixing the
     code so that it doesn't needlessly set fields in the union and mess
     up the error handling.

   - The audit_receive_msg() function wasn't validating user input as
     well as it should in all cases, we add the necessary checks"

* tag 'audit-pr-20200226' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: always check the netlink payload length in audit_receive_msg()
  audit: fix error handling in audit_data_to_entry()

Merge tag 'tag-chrome-platform-fixes-for-v5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform fix from Benson Leung:
 "Fix a build warning"

* tag 'tag-chrome-platform-fixes-for-v5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: wilco_ec: Include asm/unaligned instead of linux/ path

Pull tracing and bootconfig updates:
 "Fixes and changes to bootconfig before it goes live in a release.

  Change in API of bootconfig (before it comes live in a release):
  - Have a magic value "BOOTCONFIG" in initrd to know a bootconfig
    exists
  - Set CONFIG_BOOT_CONFIG to 'n' by default
  - Show error if "bootconfig" on cmdline but not compiled in
  - Prevent redefining the same value
  - Have a way to append values
  - Added a SELECT BLK_DEV_INITRD to fix a build failure

  Synthetic event fixes:
  - Switch to raw_smp_processor_id() for recording CPU value in preempt
    section. (No care for what the value actually is)
  - Fix samples always recording u64 values
  - Fix endianess
  - Check number of values matches number of fields
  - Fix a printing bug

  Fix of trace_printk() breaking postponed start up tests

  Make a function static that is only used in a single file"

* tag 'trace-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  bootconfig: Fix CONFIG_BOOTTIME_TRACING dependency issue
  bootconfig: Add append value operator support
  bootconfig: Prohibit re-defining value on same key
  bootconfig: Print array as multiple commands for legacy command line
  bootconfig: Reject subkey and value on same parent key
  tools/bootconfig: Remove unneeded error message silencer
  bootconfig: Add bootconfig magic word for indicating bootconfig explicitly
  bootconfig: Set CONFIG_BOOT_CONFIG=n by default
  tracing: Clear trace_state when starting trace
  bootconfig: Mark boot_config_checksum() static
  tracing: Disable trace_printk() on post poned tests
  tracing: Have synthetic event test use raw_smp_processor_id()
  tracing: Fix number printing bug in print_synth_event()
  tracing: Check that number of vals matches number of synth event fields
  tracing: Make synth_event trace functions endian-correct
  tracing: Make sure synth_event_trace() example always uses u64

Merge tag 'linux-kselftest-kunit-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kunit fixes from Shuah Khan:
 "This Kselftest kunit update consists of fixes to documentation and
  the run-time tool from Brendan Higgins and Heidi Fahim"

* tag 'linux-kselftest-kunit-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: run kunit_tool from any directory
  kunit: test: Improve error messages for kunit_tool when kunitconfig is invalid
  Documentation: kunit: fixed sphinx error in code block

Merge tag 'linux-kselftest-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fixes from Shuah Khan:

 - fixes to TIMEOUT failures and out-of-tree compilation compilation
   errors from Michael Ellerman.

 - declutter git status fix from Christophe Leroy

* tag 'linux-kselftest-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/rseq: Fix out-of-tree compilation
  selftests: Install settings files to fix TIMEOUT failures
  selftest/lkdtm: Don't pollute 'git status'

This reverts commit ead68df9.

Using the -Werror flag breaks the build for me due to mostly harmless
KASAN or similar warnings:

  arch/x86/kvm/x86.c: In function ‘kvm_timer_init’:
  arch/x86/kvm/x86.c:7209:1: error: the frame size of 1112 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

Feel free to add a CONFIG_WERROR if you care strong enough, but don't
break peoples builds for absolutely no good reason.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When queueing a signal, we increment both the users count of pending
signals (for RLIMIT_SIGPENDING tracking) and we increment the refcount
of the user struct itself (because we keep a reference to the user in
the signal structure in order to correctly account for it when freeing).

That turns out to be fairly expensive, because both of them are atomic
updates, and particularly under extreme signal handling pressure on big
machines, you can get a lot of cache contention on the user struct.
That can then cause horrid cacheline ping-pong when you do these
multiple accesses.

So change the reference counting to only pin the user for the _first_
pending signal, and to unpin it when the last pending signal is
dequeued.  That means that when a user sees a lot of concurrent signal
queuing - which is the only situation when this matters - the only
atomic access needed is generally the 'sigpending' count update.

This was noticed because of a particularly odd timing artifact on a
dual-socket 96C/192T Cascade Lake platform: when you get into bad
contention, on that machine for some reason seems to be much worse when
the contention happens in the upper 32-byte half of the cacheline.

As a result, the kernel test robot will-it-scale 'signal1' benchmark had
an odd performance regression simply due to random alignment of the
'struct user_struct' (and pointed to a completely unrelated and
apparently nonsensical commit for the regression).

Avoiding the double increments (and decrements on the dequeueing side,
of course) makes for much less contention and hugely improved
performance on that will-it-scale microbenchmark.

Quoting Feng Tang:

 "It makes a big difference, that the performance score is tripled! bump
  from original 17000 to 54000. Also the gap between 5.0-rc6 and
  5.0-rc6+Jiri's patch is reduced to around 2%"

[ The "2% gap" is the odd cacheline placement difference on that
  platform: under the extreme contention case, the effect of which half
  of the cacheline was hot was 5%, so with the reduced contention the
  odd timing artifact is reduced too ]

It does help in the non-contended case too, but is not nearly as
noticeable.
Reported-and-tested-by: Feng Tang <feng.tang@intel.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Philip Li <philip.li@intel.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since commit d8a953dd ("bootconfig: Set CONFIG_BOOT_CONFIG=n by
default") also changed the CONFIG_BOOTTIME_TRACING to select
CONFIG_BOOT_CONFIG to show the boot-time tracing on the menu,
it introduced wrong dependencies with BLK_DEV_INITRD as below.

WARNING: unmet direct dependencies detected for BOOT_CONFIG
  Depends on [n]: BLK_DEV_INITRD [=n]
  Selected by [y]:
  - BOOTTIME_TRACING [=y] && TRACING_SUPPORT [=y] && FTRACE [=y] && TRACING [=y]

This makes the CONFIG_BOOT_CONFIG selects CONFIG_BLK_DEV_INITRD to
fix this error and make CONFIG_BOOTTIME_TRACING=n by default, so
that both boot-time tracing and boot configuration off but those
appear on the menu list.

Link: http://lkml.kernel.org/r/158264140162.23842.11237423518607465535.stgit@devnote2

Fixes: d8a953dd ("bootconfig: Set CONFIG_BOOT_CONFIG=n by default")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Compiled-tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Pull RISC-V fixes from Palmer Dabbelt:
 "This contains a handful of RISC-V related fixes that I've collected
  and would like to target for 5.6-rc4:

   - A fix to set up the PMPs on boot, which allows the kernel to access
     memory on systems that don't set up permissive PMPs before getting
     to Linux. This only effects machine-mode kernels, which currently
     means only NOMMU kernels.

   - A fix to avoid enabling supervisor-mode interrupts when running in
     machine-mode, also only for NOMMU kernels.

   - A pair of fixes to our KASAN support to avoid corrupting memory.

   - A gitignore fix.

  This boots on QEMU's virt board for me"

* tag 'riscv-for-linux-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: adjust the indent
  riscv: allocate a complete page size for each page table
  riscv: Fix gitignore
  RISC-V: Don't enable all interrupts in trap_init()
  riscv: set pmp configuration if kernel is running in M-mode

Pull MIPS fixes from Paul Burton:
 "Here are a few MIPS fixes, and a MAINTAINERS update to hand over MIPS
  maintenance to Thomas Bogendoerfer - this will be my final pull
  request as MIPS maintainer.

  Thanks for your helpful comments, useful corrections & responsiveness
  during the time I've fulfilled the role, and I'm sure I'll pop up
  elsewhere in the tree somewhere down the line"

* 'mips-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MAINTAINERS: Hand MIPS over to Thomas
  MIPS: ingenic: DTS: Fix watchdog nodes
  MIPS: X1000: Fix clock of watchdog node.
  MIPS: vdso: Wrap -mexplicit-relocs in cc-option
  MIPS: VPE: Fix a double free and a memory leak in 'release_vpe()'
  MIPS: cavium_octeon: Fix syncw generation.
  mips: vdso: add build time check that no 'jalr t9' calls left
  MIPS: Disable VDSO time functionality on microMIPS
  mips: vdso: fix 'jalr t9' crash in vdso code

When there was no parallelism (no top-level -j arg and a pre-1.7
sphinx-build), the argument passed would be empty ("") instead of just
being missing, which would (understandably) badly confuse sphinx-build.
Fix this by removing the quotes.
Reported-by: Rafael J. Wysocki <rafael@kernel.org>
Fixes: 51e46c7a ("docs, parallelism: Rearrange how jobserver reservations are made")
Cc: stable@vger.kernel.org  # v5.5 only
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

MPX was removed in commit 45fc24e8 ("x86/mpx: remove MPX from
arch/x86"), this removes the corresponding entry in the x86 toc.

This was suggested by a Sphinx warning.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Fixes: 45fc24e8 ("x86/mpx: remove MPX from arch/x86")
Acked-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

My time with MIPS the company has reached its end, and so at best I'll
have little time spend on maintaining arch/mips/.

Ralf last authored a patch over 2 years ago, the last time he committed
one is even further back & activity was sporadic for a while before
that. The reality is that he isn't active.

Having a new maintainer with time to do things properly will be
beneficial all round. Thomas Bogendoerfer has been involved in MIPS
development for a long time & has offered to step up as maintainer, so
add Thomas and remove myself & Ralf from the MIPS entry.

Ralf already has an entry in CREDITS to honor his contributions, so this
just adds one for me.
Signed-off-by: Paul Burton <paulburton@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@vger.kernel.org

This patch ensures that we always check the netlink payload length
in audit_receive_msg() before we take any action on the payload
itself.

Cc: stable@vger.kernel.org
Reported-by: syzbot+399c44bf1f43b8747403@syzkaller.appspotmail.com
Reported-by: syzbot+e4b12d8d202701f08b6d@syzkaller.appspotmail.com
Signed-off-by: Paul Moore <paul@paul-moore.com>

Adjust the indent to match Linux coding style.
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Each page table should be created by allocating a complete page size
for it. Otherwise, the content of the page table would be corrupted
somewhere through memory allocation which allocates the memory at the
middle of the page table for other use.
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Pull kvm fixes from Paolo Bonzini:
 "Bugfixes, including the fix for CVE-2020-2732 and a few issues found
  by 'make W=1'"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: s390: rstify new ioctls in api.rst
  KVM: nVMX: Check IO instruction VM-exit conditions
  KVM: nVMX: Refactor IO bitmap checks into helper function
  KVM: nVMX: Don't emulate instructions in guest mode
  KVM: nVMX: Emulate MTF when performing instruction emulation
  KVM: fix error handling in svm_hardware_setup
  KVM: SVM: Fix potential memory leak in svm_cpu_init()
  KVM: apic: avoid calculating pending eoi from an uninitialized val
  KVM: nVMX: clear PIN_BASED_POSTED_INTR from nested pinbased_ctls only when apicv is globally disabled
  KVM: nVMX: handle nested posted interrupts when apicv is disabled for L1
  kvm: x86: svm: Fix NULL pointer dereference when AVIC not enabled
  KVM: VMX: Add VMX_FEATURE_USR_WAIT_PAUSE
  KVM: nVMX: Hold KVM's srcu lock when syncing vmcs12->shadow
  KVM: x86: don't notify userspace IOAPIC on edge-triggered interrupt EOI
  kvm/emulate: fix a -Werror=cast-function-type
  KVM: x86: fix incorrect comparison in trace event
  KVM: nVMX: Fix some obsolete comments and grammar error
  KVM: x86: fix missing prototypes
  KVM: x86: enable -Werror

Pull crypto fixes from Herbert Xu:
 "This fixes a Kconfig-related build error and an integer overflow in
  chacha20poly1305"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: chacha20poly1305 - prevent integer overflow on large input
  tee: amdtee: amdtee depends on CRYPTO_DEV_CCP_DD

Pull tmpfs fix from Al Viro:
 "Regression from fs_parse series this cycle..."

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  tmpfs: deny and force are not huge mount options

Jordy Zomer reported a KASAN out-of-bounds read in the floppy driver in
wait_til_ready().

Which on the face of it can't happen, since as Willy Tarreau points out,
the function does no particular memory access.  Except through the FDCS
macro, which just indexes a static allocation through teh current fdc,
which is always checked against N_FDC.

Except the checking happens after we've already assigned the value.

The floppy driver is a disgrace (a lot of it going back to my original
horrd "design"), and has no real maintainer.  Nobody has the hardware,
and nobody really cares.  But it still gets used in virtual environment
because it's one of those things that everybody supports.

The whole thing should be re-written, or at least parts of it should be
seriously cleaned up.  The 'current fdc' index, which is used by the
FDCS macro, and which is often shadowed by a local 'fdc' variable, is a
prime example of how not to write code.

But because nobody has the hardware or the motivation, let's just fix up
the immediate problem with a nasty band-aid: test the fdc index before
actually assigning it to the static 'fdc' variable.
Reported-by: Jordy Zomer <jordy@simplyhacker.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We also need to rstify the new ioctls that we added in parallel to the
rstification of the kvm docs.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull btrfs fixes from David Sterba:
 "These are fixes that were found during testing with help of error
  injection, plus some other stable material.

  There's a fixup to patch added to rc1 causing locking in wrong context
  warnings, tests found one more deadlock scenario. The patches are
  tagged for stable, two of them now in the queue but we'd like all
  three released at the same time.

  I'm not happy about fixes to fixes in such a fast succession during
  rcs, but I hope we found all the fallouts of commit 28553fa9
  ('Btrfs: fix race between shrinking truncate and fiemap')"

* tag 'for-5.6-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: fix deadlock during fast fsync when logging prealloc extents beyond eof
  Btrfs: fix btrfs_wait_ordered_range() so that it waits for all ordered extents
  btrfs: fix bytes_may_use underflow in prealloc error condtition
  btrfs: handle logged extent failure properly
  btrfs: do not check delayed items are empty for single transaction cleanup
  btrfs: reset fs_root to NULL on error in open_ctree
  btrfs: destroy qgroup extent records on transaction abort

Pull ext4 fixes from Ted Ts'o:
 "More miscellaneous ext4 bug fixes (all stable fodder)"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix mount failure with quota configured as module
  jbd2: fix ocfs2 corrupt when clearing block group bits
  ext4: fix race between writepages and enabling EXT4_EXTENTS_FL
  ext4: rename s_journal_flag_rwsem to s_writepages_rwsem
  ext4: fix potential race between s_flex_groups online resizing and access
  ext4: fix potential race between s_group_info online resizing and access
  ext4: fix potential race between online resizing and write operations
  ext4: add cond_resched() to __ext4_find_entry()
  ext4: fix a data race in EXT4_I(inode)->i_disksize

Pull csky updates from Guo Ren:
 "Sorry, I missed 5.6-rc1 merge window, but in this pull request the
  most are the fixes and the rests are between fixes and features. The
  only outside modification is the MAINTAINERS file update with our
  mailing list.

   - cache flush implementation fixes

   - ftrace modify panic fix

   - CONFIG_SMP boot problem fix

   - fix pt_regs saving for atomic.S

   - fix fixaddr_init without highmem.

   - fix stack protector support

   - fix fake Tightly-Coupled Memory code compile and use

   - fix some typos and coding convention"

* tag 'csky-for-linus-5.6-rc3' of git://github.com/c-sky/csky-linux: (23 commits)
  csky: Replace <linux/clk-provider.h> by <linux/of_clk.h>
  csky: Implement copy_thread_tls
  csky: Add PCI support
  csky: Minimize defconfig to support buildroot config.fragment
  csky: Add setup_initrd check code
  csky: Cleanup old Kconfig options
  arch/csky: fix some Kconfig typos
  csky: Fixup compile warning for three unimplemented syscalls
  csky: Remove unused cache implementation
  csky: Fixup ftrace modify panic
  csky: Add flush_icache_mm to defer flush icache all
  csky: Optimize abiv2 copy_to_user_page with VM_EXEC
  csky: Enable defer flush_dcache_page for abiv2 cpus (807/810/860)
  csky: Remove unnecessary flush_icache_* implementation
  csky: Support icache flush without specific instructions
  csky/Kconfig: Add Kconfig.platforms to support some drivers
  csky/smp: Fixup boot failed when CONFIG_SMP
  csky: Set regs->usp to kernel sp, when the exception is from kernel
  csky/mm: Fixup export invalid_pte_table symbol
  csky: Separate fixaddr_init from highmem
  ...

Consult the 'unconditional IO exiting' and 'use IO bitmaps' VM-execution
controls when checking instruction interception. If the 'use IO bitmaps'
VM-execution control is 1, check the instruction access against the IO
bitmaps to determine if the instruction causes a VM-exit.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Checks against the IO bitmap are useful for both instruction emulation
and VM-exit reflection. Refactor the IO bitmap checks into a helper
function.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

vmx_check_intercept is not yet fully implemented. To avoid emulating
instructions disallowed by the L1 hypervisor, refuse to emulate
instructions by default.

Cc: stable@vger.kernel.org
[Made commit, added commit msg - Oliver]
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Since commit 5f3d45e7 ("kvm/x86: add support for
MONITOR_TRAP_FLAG"), KVM has allowed an L1 guest to use the monitor trap
flag processor-based execution control for its L2 guest. KVM simply
forwards any MTF VM-exits to the L1 guest, which works for normal
instruction execution.

However, when KVM needs to emulate an instruction on the behalf of an L2
guest, the monitor trap flag is not emulated. Add the necessary logic to
kvm_skip_emulated_instruction() to synthesize an MTF VM-exit to L1 upon
instruction emulation for L2.

Fixes: 5f3d45e7 ("kvm/x86: add support for MONITOR_TRAP_FLAG")
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

rename svm_hardware_unsetup as svm_hardware_teardown, move
it before svm_hardware_setup, and call it to free all memory
if fail to setup in svm_hardware_setup, otherwise memory will
be leaked

remove __exit attribute for it since it is called in __init
function
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The C-Sky platform code is not a clock provider, and just needs to call
of_clk_init().

Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>

Pull RAS fixes from Thomas Gleixner:
 "Two fixes for the AMD MCE driver:

   - Populate the per CPU MCA bank descriptor pointer only after it has
     been completely set up to prevent a use-after-free in case that one
     of the subsequent initialization step fails

   - Implement a proper release function for the sysfs entries of MCA
     threshold controls instead of freeing the memory right in the CPU
     teardown code, which leads to another use-after-free when the
     associated sysfs file is opened and accessed"

* tag 'ras-urgent-2020-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce/amd: Fix kobject lifetime
  x86/mce/amd: Publish the bank pointer only after setup has succeeded

Commit 219ca394 ("audit: use union for audit_field values since
they are mutually exclusive") combined a number of separate fields in
the audit_field struct into a single union.  Generally this worked
just fine because they are generally mutually exclusive.
Unfortunately in audit_data_to_entry() the overlap can be a problem
when a specific error case is triggered that causes the error path
code to attempt to cleanup an audit_field struct and the cleanup
involves attempting to free a stored LSM string (the lsm_str field).
Currently the code always has a non-NULL value in the
audit_field.lsm_str field as the top of the for-loop transfers a
value into audit_field.val (both .lsm_str and .val are part of the
same union); if audit_data_to_entry() fails and the audit_field
struct is specified to contain a LSM string, but the
audit_field.lsm_str has not yet been properly set, the error handling
code will attempt to free the bogus audit_field.lsm_str value that
was set with audit_field.val at the top of the for-loop.

This patch corrects this by ensuring that the audit_field.val is only
set when needed (it is cleared when the audit_field struct is
allocated with kcalloc()).  It also corrects a few other issues to
ensure that in case of error the proper error code is returned.

Cc: stable@vger.kernel.org
Fixes: 219ca394 ("audit: use union for audit_field values since they are mutually exclusive")
Reported-by: syzbot+1f4d90ead370d72e450b@syzkaller.appspotmail.com
Signed-off-by: Paul Moore <paul@paul-moore.com>

Pull irq fixes from Thomas Gleixner:
 "Two fixes for the irq core code which are follow ups to the recent MSI
  fixes:

   - The WARN_ON which was put into the MSI setaffinity callback for
     paranoia reasons actually triggered via a callchain which escaped
     when all the possible ways to reach that code were analyzed.

     The proc/irq/$N/*affinity interfaces have a quirk which came in
     when ALPHA moved to the generic interface: In case that the written
     affinity mask does not contain any online CPU it calls into ALPHAs
     magic auto affinity setting code.

     A few years later this mechanism was also made available to x86 for
     no good reasons and in a way which circumvents all sanity checks
     for interrupts which cannot have their affinity set from process
     context on X86 due to the way the X86 interrupt delivery works.

     It would be possible to make this work properly, but there is no
     point in doing so. If the interrupt is not yet started then the
     affinity setting has no effect and if it is started already then it
     is already assigned to an online CPU so there is no point to
     randomly move it to some other CPU. Just return EINVAL as the code
     has done before that change forever.

   - The new MSI quirk bit in the irq domain flags turned out to be
     already occupied, which escaped the author and the reviewers
     because the already in use bits were 0,6,2,3,4,5 listed in that
     order.

     That bit 6 was simply overlooked because the ordering was straight
     forward linear otherwise. So the new bit ended up being a
     duplicate.

     Fix it up by switching the oddball 6 to the obvious 1"

* tag 'irq-urgent-2020-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/irqdomain: Make sure all irq domain flags are distinct
  genirq/proc: Reject invalid affinity masks (again)

Pull x86 fixes from Thomas Gleixner:
 "Two fixes for x86:

   - Remove the __force_oder definiton from the kaslr boot code as it is
     already defined in the page table code which makes GCC 10 builds
     fail because it changed the default to -fno-common.

   - Address the AMD erratum 1054 concerning the IRPERF capability and
     enable the Instructions Retired fixed counter on machines which are
     not affected by the erratum"

* tag 'x86-urgent-2020-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu/amd: Enable the fixed Instructions Retired counter IRPERF
  x86/boot/compressed: Don't declare __force_order in kaslr_64.c

Pull zonefs fix from Damien Le Moal:
 "A single patch fixing typos in the documentation file"

* tag 'zonefs-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: fix documentation typos etc.

Pull io_uring fixes from Jens Axboe:
 "Here's a small collection of fixes that were queued up:

   - Remove unnecessary NULL check (Dan)

   - Missing io_req_cancelled() call in fallocate (Pavel)

   - Put the cleanup check for aux data in the right spot (Pavel)

   - Two fixes for SQPOLL (Stefano, Xiaoguang)"

* tag 'io_uring-5.6-2020-02-22' of git://git.kernel.dk/linux-block:
  io_uring: fix __io_iopoll_check deadlock in io_sq_thread
  io_uring: prevent sq_thread from spinning when it should stop
  io_uring: fix use-after-free by io_cleanup_req()
  io_uring: remove unnecessary NULL checks
  io_uring: add missing io_req_cancelled()