- 25 Apr, 2022 9 commits
-
-
Logan Gunthorpe authored
rdev and replacement are protected in some circumstances with rcu_dereference and synchronize_rcu (in raid5_remove_disk()). However, they were not annotated with __rcu so a sparse warning is emitted for every rcu_dereference() call. Add the __rcu annotation and fix up the initialization with RCU_INIT_POINTER, all pointer modifications with rcu_assign_pointer(), a few cases where the pointer value is tested with rcu_access_pointer() and one case where READ_ONCE() is used instead of rcu_dereference(), a case in print_raid5_conf() that should have rcu_dereference() and rcu_read_[un]lock() calls. Additional sparse issues will be fixed up in further commits. Signed-off-by:
Logan Gunthorpe <logang@deltatee.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Song Liu <song@kernel.org>
-
Logan Gunthorpe authored
Sparse reports many warnings of the form: drivers/md/raid5.c:1476:16: warning: dereference of noderef expression This is because all struct raid5_percpu definitions get marked as __percpu when really only the pointer in r5conf should have that annotation. Fix this by moving the defnition of raid5_precpu out of the definition of struct r5conf. Signed-off-by:
-
Logan Gunthorpe authored
Be more careful about the error returns. Most errors in this function are actually ENOMEM, but it forcibly returns EIO if conf has been allocated. Instead return ret and ensure it is set appropriately before each goto abort. Signed-off-by:
-
Heming Zhao authored
This commit includes two topics: 1> replace deprecated strlcpy change strlcpy to strscpy for strlcpy is marked as deprecated in Documentation/process/deprecated.rst 2> remove duplicated strlcpy line in md_bitmap_read_sb@md-bitmap.c there are two duplicated strlcpy(), the history: - commit cf921cc1 ("Add node recovery callbacks") introduced the first usage of strlcpy(). - commit b97e9257 ("Use separate bitmaps for each nodes in the cluster") introduced the second strlcpy(). this time, the two strlcpy() are same, we can remove anyone safely. - commit d3b178ad ("md: Skip cluster setup for dm-raid") added dm-raid special handling. And the "nodes" value is the key of this patch. but from this patch, strlcpy() which was introduced by b97e9257 become necessary. - commit 3c462c88 ("md: Increment version for clustered bitmaps") used clustered major version to only handle in clustered env. this patch could look a polishment for clustered code logic. So cf921cc1 became useless after d3b178ad, we could remove it safely. Signed-off-by:
Heming Zhao <heming.zhao@suse.com> Signed-off-by:
-
Heming Zhao authored
If bitmap area contains invalid data, kernel will crash then mdadm triggers "Segmentation fault". This is cluster-md speical bug. In non-clustered env, mdadm will handle broken metadata case. In clustered array, only kernel space handles bitmap slot info. But even this bug only happened in clustered env, current sanity check is wrong, the code should be changed. How to trigger: (faulty injection) dd if=/dev/zero bs=1M count=1 oflag=direct of=/dev/sda dd if=/dev/zero bs=1M count=1 oflag=direct of=/dev/sdb mdadm -C /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sda /dev/sdb mdadm -Ss echo aaa > magic.txt == below modifying slot 2 bitmap data == dd if=magic.txt of=/dev/sda seek=16384 bs=1 count=3 <== destroy magic dd if=/dev/zero of=/dev/sda seek=16436 bs=1 count=4 <== ZERO chunksize mdadm -A /dev/md0 /dev/sda /dev/sdb == kernel crashes. mdadm outputs "Segmentation fault" == Reason of kernel crash: In md_bitmap_read_sb (called by md_bitmap_create), bad bitmap magic didn't block chunksize assignment, and zero value made DIV_ROUND_UP_SECTOR_T() trigger "divide error". Crash log: kernel: md: md0 stopped. kernel: md/raid1:md0: not clean -- starting background reconstruction kernel: md/raid1:md0: active with 2 out of 2 mirrors kernel: dlm: ... ... kernel: md-cluster: Joined cluster 44810aba-38bb-e6b8-daca-bc97a0b254aa slot 1 kernel: md0: invalid bitmap file superblock: bad magic kernel: md_bitmap_copy_from_slot can't get bitmap from slot 2 kernel: md-cluster: Could not gather bitmaps from slot 2 kernel: divide error: 0000 [#1] SMP NOPTI kernel: CPU: 0 PID: 1603 Comm: mdadm Not tainted 5.14.6-1-default kernel: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) kernel: RIP: 0010:md_bitmap_create+0x1d1/0x850 [md_mod] kernel: RSP: 0018:ffffc22ac0843ba0 EFLAGS: 00010246 kernel: ... ... kernel: Call Trace: kernel: ? dlm_lock_sync+0xd0/0xd0 [md_cluster 77fe..7a0] kernel: md_bitmap_copy_from_slot+0x2c/0x290 [md_mod 24ea..d3a] kernel: load_bitmaps+0xec/0x210 [md_cluster 77fe..7a0] kernel: md_bitmap_load+0x81/0x1e0 [md_mod 24ea..d3a] kernel: do_md_run+0x30/0x100 [md_mod 24ea..d3a] kernel: md_ioctl+0x1290/0x15a0 [md_mod 24ea....d3a] kernel: ? mddev_unlock+0xaa/0x130 [md_mod 24ea..d3a] kernel: ? blkdev_ioctl+0xb1/0x2b0 kernel: block_ioctl+0x3b/0x40 kernel: __x64_sys_ioctl+0x7f/0xb0 kernel: do_syscall_64+0x59/0x80 kernel: ? exit_to_user_mode_prepare+0x1ab/0x230 kernel: ? syscall_exit_to_user_mode+0x18/0x40 kernel: ? do_syscall_64+0x69/0x80 kernel: entry_SYSCALL_64_after_hwframe+0x44/0xae kernel: RIP: 0033:0x7f4a15fa722b kernel: ... ... kernel: ---[ end trace 8afa7612f559c868 ]--- kernel: RIP: 0010:md_bitmap_create+0x1d1/0x850 [md_mod] Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by:
-
Xiaomeng Tong authored
The bug is here: if (!rdev || rdev->desc_nr != nr) { The list iterator value 'rdev' will *always* be set and non-NULL by rdev_for_each_rcu(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element found (In fact, it will be a bogus pointer to an invalid struct object containing the HEAD). Otherwise it will bypass the check and lead to invalid memory access passing the check. To fix the bug, use a new variable 'iter' as the list iterator, while using the original variable 'pdev' as a dedicated pointer to point to the found element. Cc: stable@vger.kernel.org Fixes: 70bcecdb ("md-cluster: Improve md_reload_sb to be less error prone") Signed-off-by:Xiaomeng Tong <xiam0nd.tong@gmail.com> Signed-off-by:
-
Xiaomeng Tong authored
The bug is here: if (!rdev) The list iterator value 'rdev' will *always* be set and non-NULL by rdev_for_each(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element found. Otherwise it will bypass the NULL check and lead to invalid memory access passing the check. To fix the bug, use a new variable 'iter' as the list iterator, while using the original variable 'rdev' as a dedicated pointer to point to the found element. Cc: stable@vger.kernel.org Fixes: 2aa82191 ("md-cluster: Perform a lazy update") Acked-by:
Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by:
-
Mariusz Tkaczyk authored
Raid456 module had allowed to achieve failed state. It was fixed by fb73b357 ("raid5: block failing device if raid will be failed"). This fix introduces a bug, now if raid5 fails during IO, it may result with a hung task without completion. Faulty flag on the device is necessary to process all requests and is checked many times, mainly in analyze_stripe(). Allow to set faulty on drive again and set MD_BROKEN if raid is failed. As a result, this level is allowed to achieve failed state again, but communication with userspace (via -EBUSY status) will be preserved. This restores possibility to fail array via #mdadm --set-faulty command and will be fixed by additional verification on mdadm side. Reproduction steps: mdadm -CR imsm -e imsm -n 3 /dev/nvme[0-2]n1 mdadm -CR r5 -e imsm -l5 -n3 /dev/nvme[0-2]n1 --assume-clean mkfs.xfs /dev/md126 -f mount /dev/md126 /mnt/root/ fio --filename=/mnt/root/file --size=5GB --direct=1 --rw=randrw --bs=64k --ioengine=libaio --iodepth=64 --runtime=240 --numjobs=4 --time_based --group_reporting --name=throughput-test-job --eta-newline=1 & echo 1 > /sys/block/nvme2n1/device/device/remove echo 1 > /sys/block/nvme1n1/device/device/remove [ 1475.787779] Call Trace: [ 1475.793111] __schedule+0x2a6/0x700 [ 1475.799460] schedule+0x38/0xa0 [ 1475.805454] raid5_get_active_stripe+0x469/0x5f0 [raid456] [ 1475.813856] ? finish_wait+0x80/0x80 [ 1475.820332] raid5_make_request+0x180/0xb40 [raid456] [ 1475.828281] ? finish_wait+0x80/0x80 [ 1475.834727] ? finish_wait+0x80/0x80 [ 1475.841127] ? finish_wait+0x80/0x80 [ 1475.847480] md_handle_request+0x119/0x190 [ 1475.854390] md_make_request+0x8a/0x190 [ 1475.861041] generic_make_request+0xcf/0x310 [ 1475.868145] submit_bio+0x3c/0x160 [ 1475.874355] iomap_dio_submit_bio.isra.20+0x51/0x60 [ 1475.882070] iomap_dio_bio_actor+0x175/0x390 [ 1475.889149] iomap_apply+0xff/0x310 [ 1475.895447] ? iomap_dio_bio_actor+0x390/0x390 [ 1475.902736] ? iomap_dio_bio_actor+0x390/0x390 [ 1475.909974] iomap_dio_rw+0x2f2/0x490 [ 1475.916415] ? iomap_dio_bio_actor+0x390/0x390 [ 1475.923680] ? atime_needs_update+0x77/0xe0 [ 1475.930674] ? xfs_file_dio_aio_read+0x6b/0xe0 [xfs] [ 1475.938455] xfs_file_dio_aio_read+0x6b/0xe0 [xfs] [ 1475.946084] xfs_file_read_iter+0xba/0xd0 [xfs] [ 1475.953403] aio_read+0xd5/0x180 [ 1475.959395] ? _cond_resched+0x15/0x30 [ 1475.965907] io_submit_one+0x20b/0x3c0 [ 1475.972398] __x64_sys_io_submit+0xa2/0x180 [ 1475.979335] ? do_io_getevents+0x7c/0xc0 [ 1475.986009] do_syscall_64+0x5b/0x1a0 [ 1475.992419] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 1476.000255] RIP: 0033:0x7f11fc27978d [ 1476.006631] Code: Bad RIP value. [ 1476.073251] INFO: task fio:3877 blocked for more than 120 seconds. Cc: stable@vger.kernel.org Fixes: fb73b357 ("raid5: block failing device if raid will be failed") Reviewd-by:
Xiao Ni <xni@redhat.com> Signed-off-by:
Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com> Signed-off-by:
-
Mariusz Tkaczyk authored
There is no direct mechanism to determine raid failure outside personality. It is done by checking rdev->flags after executing md_error(). If "faulty" flag is not set then -EBUSY is returned to userspace. -EBUSY means that array will be failed after drive removal. Mdadm has special routine to handle the array failure and it is executed if -EBUSY is returned by md. There are at least two known reasons to not consider this mechanism as correct: 1. drive can be removed even if array will be failed[1]. 2. -EBUSY seems to be wrong status. Array is not busy, but removal process cannot proceed safe. -EBUSY expectation cannot be removed without breaking compatibility with userspace. In this patch first issue is resolved by adding support for MD_BROKEN flag for RAID1 and RAID10. Support for RAID456 is added in next commit. The idea is to set the MD_BROKEN if we are sure that raid is in failed state now. This is done in each error_handler(). In md_error() MD_BROKEN flag is checked. If is set, then -EBUSY is returned to userspace. As in previous commit, it causes that #mdadm --set-faulty is able to fail array. Previously proposed workaround is valid if optional functionality[1] is disabled. [1] commit 9a567843("md: allow last device to be forcibly removed from RAID1/RAID10.") Reviewd-by:
-
- 18 Apr, 2022 31 commits
-
-
Jack Wang authored
Flushing system-wide workqueues is dangerous and will be forbidden. Replace system_long_wq with local rnbd_clt_wq. Link: https://lkml.kernel.org/r/49925af7-78a8-a3dd-bce6-cfc02e1a9236@I-love.SAKURA.ne.jp Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
Jack Wang <jinpu.wang@ionos.com> Reviewed-by:
Santosh Kumar Pradhan <santosh.pradhan@ionos.com> Link: https://lore.kernel.org/r/20220413123420.66470-1-jinpu.wang@ionos.comSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
There is no need to destroy the workqueue when clearing unbinding a loop device from a backing file. Not doing so on the other hand avoid creating a complex lock dependency chain involving the global system_transition_mutex. Based on a patch from Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>. Reported-by: syzbot+6479585dfd4dedd3f7e1@syzkaller.appspotmail.com Signed-off-by:
Jan Kara <jack@suse.cz> Tested-by: syzbot+6479585dfd4dedd3f7e1@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20220330052917.2566582-16-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
lo_refcount counts how many openers a loop device has, but that count is already provided by the block layer in the bd_openers field of the whole-disk block_device. Remove lo_refcount and allow opens to succeed even on devices beeing deleted - now that ->free_disk is implemented we can handle that race gracefull and all I/O on it will just fail. Similarly there is a small race window now where loop_control_remove does not synchronize the delete vs the remove due do bd_openers not being under lo_mutex protection, but we can handle that just as gracefully. Signed-off-by:
-
Tetsuo Handa authored
Since ->release is called with disk->open_mutex held, and __loop_clr_fd() from lo_release() is called via ->release when disk_openers() == 0, we are guaranteed that "struct file" which will be passed to loop_validate_file() via fget() cannot be the loop device __loop_clr_fd(lo, true) will clear. Thus, there is no need to hold loop_validate_mutex from __loop_clr_fd() if release == true. When I made commit 3ce6e1f6 ("loop: reintroduce global lock for safe loop_validate_file() traversal"), I wrote "It is acceptable for loop_validate_file() to succeed, for actual clear operation has not started yet.". But now I came to feel why it is acceptable to succeed. It seems that the loop driver was added in Linux 1.3.68, and if (lo->lo_refcnt > 1) return -EBUSY; check in loop_clr_fd() was there from the beginning. The intent of this check was unclear. But now I think that current disk_openers(lo->lo_disk) > 1 form is there for three reasons. (1) Avoid I/O errors when some process which opens and reads from this loop device in response to uevent notification (e.g. systemd-udevd), as described in commit a1ecac3b ("loop: Make explicit loop device destruction lazy"). This opener is short-lived because it is likely that the file descriptor used by that process is closed soon. (2) Avoid I/O errors caused by underlying layer of stacked loop devices (i.e. ioctl(some_loop_fd, LOOP_SET_FD, other_loop_fd)) being suddenly disappeared. This opener is long-lived because this reference is associated with not a file descriptor but lo->lo_backing_file. (3) Avoid I/O errors caused by underlying layer of mounted loop device (i.e. mount(some_loop_device, some_mount_point)) being suddenly disappeared. This opener is long-lived because this reference is associated with not a file descriptor but mount. While race in (1) might be acceptable, (2) and (3) should be checked racelessly. That is, make sure that __loop_clr_fd() will not run if loop_validate_file() succeeds, by doing refcount check with global lock held when explicit loop device destruction is requested. As a result of no longer waiting for lo->lo_mutex after setting Lo_rundown, we can remove pointless BUG_ON(lo->lo_state != Lo_rundown) check. Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
-
Christoph Hellwig authored
Currently, udev change event is generated for a loop device before the device is ready for IO. Due to serialization on lo->lo_mutex in lo_open() this does not matter because anybody is able to open the device and do IO only after the configuration is finished. However this synchronization in lo_open() is going away so make sure userspace reacting to the change event will see the new device state by generating the event only when the device is setup. Signed-off-by:
-
Christoph Hellwig authored
Ensure that the lo_device which is stored in the gendisk private data is valid until the gendisk is freed. Currently the loop driver uses a lot of effort to make sure a device is not freed when it is still in use, but to to fix a potential deadlock this will be relaxed a bit soon. Signed-off-by:
-
Christoph Hellwig authored
->release is only called after all outstanding I/O has completed, so only freeze the queue when clearing the backing file of a live loop device. Signed-off-by:
Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20220330052917.2566582-11-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
By the time the final ->release is called there can't be outstanding I/O. For non-final ->release there is no need for driver action at all. Thus remove the useless queue freeze. Signed-off-by:
-
Christoph Hellwig authored
Nothing prevents a file system or userspace opener of the block device from redirtying the page right afte sync_blockdev returned. Fortunately data in the page cache during a block device change is mostly harmless anyway. Signed-off-by:
-
Christoph Hellwig authored
There is no need to reinitialize idle_worker_list, worker_tree and timer every time a loop device is configured. Just initialize them once at allocation time. Signed-off-by:
Chaitanya Kulkarni <kch@nvidia.com> Tested-by:
-
Christoph Hellwig authored
Use a common helper for both timer based and uncoditional freeing of idle workers. Signed-off-by:
-
Christoph Hellwig authored
All manipulation of bd_openers is under disk->open_mutex and will remain so for the foreseeable future. But at least one place reads it without the lock (blkdev_get) and there are more to be added. So make sure the compiler does not do turn the increments and decrements into non-atomic sequences by using an atomic_t. Signed-off-by:
-
Christoph Hellwig authored
Add a helper that returns the openers for a given gendisk to avoid having drivers poke into disk->part0 to get at this information in a somewhat cumbersome way. Signed-off-by:
-
Christoph Hellwig authored
Remove the bdev variable and just use the gendisk pointed to by the zram_device directly. Signed-off-by:
-
Christoph Hellwig authored
Use a local variable for the gendisk instead of the part0 block_device, as the gendisk is what this function actually operates on. Signed-off-by:
-
Christoph Hellwig authored
The bdev parameter to ->ioctl contains the block device that the ioctl is called on, which can be the partition. But the openers check in nbd_bdev_reset really needs to check use the whole device, so switch to using that. Signed-off-by:
-
Haowen Bai authored
Return boolean values ("true" or "false") instead of 1 or 0 from bool functions. This fixes the following warnings from coccicheck: ./drivers/block/drbd/drbd_req.c:912:9-10: WARNING: return of 0/1 in function 'remote_due_to_read_balancing' with return type bool Signed-off-by:Haowen Bai <baihaowen@meizu.com> Reviewed-by:
Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20220406190715.1938174-8-christoph.boehmwalder@linbit.comSigned-off-by:
-
Uladzislau Rezki (Sony) authored
Instead of invoking a synchronize_rcu() to free a pointer after a grace period we can directly make use of new API that does the same but in more efficient way. TO: Jens Axboe <axboe@kernel.dk> TO: Philipp Reisner <philipp.reisner@linbit.com> TO: Jason Gunthorpe <jgg@nvidia.com> TO: drbd-dev@lists.linbit.com TO: linux-block@vger.kernel.org Signed-off-by:
Uladzislau Rezki (Sony) <urezki@gmail.com> Reviewed-by:
-
Cai Huoqing authored
when run checkpath.pl for the first patch, found that WARNING: Prefer 'unsigned int' to bare use of 'unsigned'. so fix it. BTW Signed-off-by:
Cai Huoqing <caihuoqing@baidu.com> Acked-by:
-
Cai Huoqing authored
it's a refactor to make use of PFN_UP helper macro Signed-off-by:
-
Jiapeng Chong authored
Variable err is set to '-EIO' but this value is never read as it is overwritten or not used later on, hence it is a redundant assignment and can be removed. Clean up the following clang-analyzer warning: drivers/block/drbd/drbd_receiver.c:3955:5: warning: Value stored to 'err' is never read [clang-analyzer-deadcode.DeadStores]. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Acked-by:
-
Arnd Bergmann authored
gcc -Wextra warns about mixing drbd_state_rv with drbd_ret_code in a couple of places: drivers/block/drbd/drbd_nl.c: In function 'drbd_adm_set_role': drivers/block/drbd/drbd_nl.c:777:14: warning: comparison between 'enum drbd_state_rv' and 'enum drbd_ret_code' [-Wenum-compare] 777 | if (retcode != NO_ERROR) | ^~ drivers/block/drbd/drbd_nl.c:784:12: warning: implicit conversion from 'enum drbd_ret_code' to 'enum drbd_state_rv' [-Wenum-conversion] 784 | retcode = ERR_MANDATORY_TAG; | ^ drivers/block/drbd/drbd_nl.c: In function 'drbd_adm_attach': drivers/block/drbd/drbd_nl.c:1965:10: warning: implicit conversion from 'enum drbd_state_rv' to 'enum drbd_ret_code' [-Wenum-conversion] 1965 | retcode = rv; /* FIXME: Type mismatch. */ | ^ drivers/block/drbd/drbd_nl.c: In function 'drbd_adm_connect': drivers/block/drbd/drbd_nl.c:2690:10: warning: implicit conversion from 'enum drbd_state_rv' to 'enum drbd_ret_code' [-Wenum-conversion] 2690 | retcode = conn_request_state(connection, NS(conn, C_UNCONNECTED), CS_VERBOSE); | ^ drivers/block/drbd/drbd_nl.c: In function 'drbd_adm_disconnect': drivers/block/drbd/drbd_nl.c:2803:11: warning: implicit conversion from 'enum drbd_state_rv' to 'enum drbd_ret_code' [-Wenum-conversion] 2803 | retcode = rv; /* FIXME: Type mismatch. */ | ^ In each case, both are passed into drbd_adm_finish(), which just takes a 32-bit integer and is happy with either, presumably intentionally. Restructure the code to pass either type directly in there in most cases, avoiding the warnings. Signed-off-by:Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Arnd Bergmann authored
There are two initializers for P_RETRY_WRITE: drivers/block/drbd/drbd_main.c:3676:22: warning: initialized field overwritten [-Woverride-init] Remove the first one since it was already ignored by the compiler and reorder the list to match the enum definition. As P_ZEROES had no entry, add that one instead. Fixes: 036b17ea ("drbd: Receiving part for the PROTOCOL_UPDATE packet") Fixes: f31e583a ("drbd: introduce P_ZEROES (REQ_OP_WRITE_ZEROES on the "wire")") Signed-off-by:
-
Christoph Hellwig authored
Randomly poking into block device internals for manual prefetches isn't exactly a very maintainable thing to do. And none of the performance critical direct I/O implementations still use this library function anyway, so just drop it. Signed-off-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20220415045258.199825-28-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
Secure erase is a very different operation from discard in that it is a data integrity operation vs hint. Fully split the limits and helper infrastructure to make the separation more clear. Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd] Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> [nifs2] Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> [f2fs] Acked-by: Coly Li <colyli@suse.de> [bcache] Acked-by: David Sterba <dsterba@suse.com> [btrfs] Acked-by:
Chao Yu <chao@kernel.org> Reviewed-by:
-
Christoph Hellwig authored
Abstract away implementation details from file systems by providing a block_device based helper to retrieve the discard granularity. Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@gmail.com> Acked-by: David Sterba <dsterba@suse.com> [btrfs] Link: https://lore.kernel.org/r/20220415045258.199825-26-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
Just use a non-zero max_discard_sectors as an indicator for discard support, similar to what is done for write zeroes. The only places where needs special attention is the RAID5 driver, which must clear discard support for security reasons by default, even if the default stacking rules would allow for it. Signed-off-by:
-
Christoph Hellwig authored
Add a helper to query the number of sectors support per each discard bio based on the block device and use this helper to stop various places from poking into the request_queue to see if discard is supported and if so how much. This mirrors what is done e.g. for write zeroes as well. Signed-off-by:
-
Christoph Hellwig authored
Move all the logic to limit the discard bio size into a common helper so that it is better documented. Signed-off-by:
Coly Li <colyli@suse.de> Reviewed-by:
-
Christoph Hellwig authored
No need to inline these fairly larger helpers. Also fix the return value to be unsigned, just like the field in struct queue_limits. Signed-off-by:
-
Christoph Hellwig authored
Use the bdev based alignment helper instead of open coding it. Signed-off-by:
-
