- 18 Mar, 2013 34 commits
-
-
Sakari Ailus authored
Use the same handlers where the structs are the same. Implement a new handler for link enumeration since struct media_links_enum is different on 32-bit and 64-bit systems. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sakari Ailus authored
Provide an ioctl handler for 32-bit binaries on 64-bit systems. Signed-off-by:
-
Peter Senna Tschudin authored
I'm pasting the original code and my proposal on the commit message for make it easy to compare the two versions. Line 62 of cx25821-audio-upstream.h contains: char *_defaultAudioName = "/root/audioGOOD.wav"; Original code after replace kmemdup for kstrdup, and after fix return error code: if (dev->input_audiofilename) { dev->_audiofilename = kstrdup(dev->input_audiofilename, GFP_KERNEL); if (!dev->_audiofilename) { err = -ENOMEM; goto error; } /* Default if filename is empty string */ if (strcmp(dev->input_audiofilename, "") == 0) dev->_audiofilename = "/root/audioGOOD.wav"; } else { dev->_audiofilename = kstrdup(_defaultAudioName, GFP_KERNEL); if (!dev->_audiofilename) { err = -ENOMEM; goto error; } } Code proposed in this patch: if ((dev->input_audiofilename) && (strcmp(dev->input_audiofilename, "") != 0)) dev->_audiofilename = kstrdup(dev->input_audiofilename, GFP_KERNEL); else dev->_audiofilename = kstrdup(_defaultAudioName, GFP_KERNEL); if (!dev->_audiofilename) { err = -ENOMEM; goto error; } Signed-off-by:Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
The current logic was broken and too complex; while it works fine for DVB-S2/DVB-S, it is broken for ISDB-T. Make the logic simpler, fixes it for ISDB-T and make it clearer. Signed-off-by: -
Mauro Carvalho Chehab authored
This function is complex, and has different workflows, one for DVBv3 calls, and another one for DVBv5 calls. Break it into 3 functions, in order to make easier to understand what each block does. No functional changes so far. A few comments got improved. Signed-off-by: -
Frank Schaefer authored
It turned out that some devices return less bytes then requested via i2c when ALL of the following 3 conditions are met: - i2c bus B is used - there was no attempt to write to the specified slave address before - no device present at the specified slave address With the current code, this triggers an -EIO error and prints a message to the system log. Because it can happen very often during device probing, it is better to ignore this error and bail out silently after the follwing i2c transaction success check with -ENODEV. [mchehab@redhat.com: a small CodingStyle fix] Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
-
Frank Schaefer authored
The em28xx driver obtains the timestamps using function v4l2_get_timestamp(), which produces a montonic timestamp. Fixes the warnings appearing in the system log since commit 6aa69f99 "[media] vb2: Add support for non monotonic timestamps" Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Register both buses 0 and 1 via I2C API. For now, bus 0 is used only by eeprom on all known devices. Later patches will be needed if this changes in the future. Signed-off-by: -
Mauro Carvalho Chehab authored
Prepare to register a separate bus for the second bus. For now, just add a new field. A latter patch will add the bits to make it work. This patch was generated by this script: perl -e 'while (<>) { if (s/EM2874_I2C_SECONDARY_BUS_SELECT.*\n//) { printf "\t\t.def_i2c_bus = 1,\n"; $found = 1; print $_ } else { if ($found) { s/^\s+// }; $found = 0; print $_; } }' \ drivers/media/usb/em28xx/em28xx-cards.c >a && mv a drivers/media/usb/em28xx/em28xx-cards.c Signed-off-by: -
Mauro Carvalho Chehab authored
Newer em28xx devices have 2 buses. Change the logic to allow using both buses. This patch was generated by this small script: for i in drivers/media/usb/em28xx/*.c; do sed 's,->i2c_adap,->i2c_adap[dev->def_i2c_bus],g;s,->i2c_client,->i2c_client[dev->def_i2c_bus],' done Of course, em28xx.h needed manual edit. Signed-off-by: -
Geert Uytterhoeven authored
m68k/sun3: drivers/media/v4l2-core/videobuf2-dma-contig.c: In function ‘vb2_dc_mmap’: drivers/media/v4l2-core/videobuf2-dma-contig.c:204: error: implicit declaration of function ‘dma_mmap_coherent’ drivers/media/v4l2-core/videobuf2-dma-contig.c: In function ‘vb2_dc_get_base_sgt’: drivers/media/v4l2-core/videobuf2-dma-contig.c:387: error: implicit declaration of function ‘dma_get_sgtable’ Make VIDEOBUF2_DMA_CONTIG and VIDEO_SH_VEU (which selects the former and doesn't have a platform dependency) depend on HAS_DMA to fix this. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Paul Bolle authored
Since commit 7543f344 ("[media] m920x: factor out a m920x_write_seq() function") building m920x.o triggers this GCC warning: drivers/media/usb/dvb-usb/m920x.c: In function ‘m920x_probe’: drivers/media/usb/dvb-usb/m920x.c:91:6: warning: ‘ret’ may be used uninitialized in this function [-Wuninitialized] This warning is caused by m920x_write_seq(), which is apparently inlined into m920x_probe(). It is clear why GCC thinks 'ret' may be used uninitialized. But in practice the first seq->address will always be non-zero when this function is called. That means we can change the while()-do{} loop into a do{}-while() loop. And that suffices to make GCC see that 'ret' will not be used uninitialized. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
Cesar Eduardo Barros authored
Apparently a copy-paste mistake; the similar sh_vou.h exists, and both were added to MAINTAINERS by commit b618b69c ([media] MAINTAINERS: add entries for sh_veu and sh_vou V4L2 drivers). Signed-off-by:
Cesar Eduardo Barros <cesarb@cesarb.net> Signed-off-by:
-
Cesar Eduardo Barros authored
That directory never existed. The intention was probably to match CARDLIST.saa7134 and README.saa7134. Signed-off-by:
-
Cesar Eduardo Barros authored
This file was moved to drivers/media/common/ by commit 62595820 ([media] cx2341x: move from media/i2c to media/common). Signed-off-by:
-
Sachin Kamat authored
Some symbols are used only in this file. Make them static. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Sachin Kamat authored
Symbols used only in this file should be made static. Signed-off-by:
-
Sachin Kamat authored
These symbols are used only in this file and can be made static. Signed-off-by:
-
Sachin Kamat authored
Since these symbols are used only in this file, they can be made static. Signed-off-by:
-
Matt Gomboc authored
Thanks for the response, I have done as you suggested. Below is an updated patch for the OTG102 device against http://git.linuxtv.org/hverkuil/media_tree.git/shortlog/refs/heads/cx231xx, kernel version 3.8. With further testing it appears the extra clauses in cx231xx-cards.c were not necessary (in static in cx231xx_init_dev and static int cx231xx_usb_probe), so those have been also been removed. Signed-off-by:
Matt Gomboc <gomboc0@gmail.com> Acked-by:
-
Chen Gang authored
need using ccflags-y instead of EXTRA_CFLAGS can reference scripts/checkpatch.pl (1755..1766) when make EXTRA_CFLAGS=-W, the compiling issue will be occured. Signed-off-by:Chen Gang <gang.chen@asianux.com> Signed-off-by:
-
Eduardo Valentin authored
Add maintainer entry for the files composing si4713 FM transmitter driver. Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
-
Syam Sidhardhan authored
kfree on NULL pointer is a no-op. Signed-off-by:
Syam Sidhardhan <s.syam@samsung.com> Signed-off-by:
-
Syam Sidhardhan authored
kfree on NULL pointer is a no-op. Signed-off-by:
-
Syam Sidhardhan authored
kfree on NULL pointer is a no-op. Signed-off-by:
-
Syam Sidhardhan authored
kfree on NULL pointer is a no-op. Signed-off-by:
-
Dmitry Torokhov authored
Even if bus is not hot-pluggable, the devices can be unbound from the driver via sysfs, so we should not be using __exit annotations on remove() methods. The only exception is drivers registered with platform_driver_probe() which specifically disables sysfs bind/unbind attributes. Similarly probe() methods should not be marked __init unless platform_driver_probe() is used. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by:
Timo Kokkonen <timo.t.kokkonen@iki.fi> Signed-off-by:
-
Antti Palosaari authored
I did what I liked to do. Also corrected two long log writings as checkpatch.pl was complaining about those. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
WARNING: at lib/dma-debug.c:947 check_for_stack+0xa7/0xf0() ehci-pci 0000:00:04.1: DMA-API: device driver maps memory fromstack Reported-by:
poma <pomidorabelisima@gmail.com> Signed-off-by:
-
Antti Palosaari authored
Implement: dvb_usbv2_generic_rw_locked() dvb_usbv2_generic_write_locked() Caller must hold device lock when locked versions are called. Signed-off-by:
-
Syam Sidhardhan authored
This patch fixes the print_buf leaking. Signed-off-by:
-
Syam Sidhardhan authored
Check for (adap == NULL) has to done before accessing adap. Signed-off-by:
-
- 14 Mar, 2013 6 commits
-
-
Ismael Luceno authored
Signed-off-by:
Ismael Luceno <ismael.luceno@corp.bluecherry.net> Signed-off-by:
-
Thiago Farina authored
Signed-off-by:
Thiago Farina <tfarina@chromium.org> Signed-off-by:
-
Igor M. Liplianin authored
Terratec Cinergy S2 USB HD Rev.2 support. This commit is a corrected cherry-pick of 03228792 which got reverted in b7e38636 because it was rebased incorrectly and introduced compilation errors. Signed-off-by:
Stephan Hilb <stephan@ecshi.net> Signed-off-by:
-
Alexey Khoroshilov authored
goto err and goto err_gateoff before mutex_lock(&state->internal->demod_lock) lead to unlock of unheld mutex in stv090x_sleep(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Manu Abraham <abraham.manu@gmail.com> Signed-off-by:
-
Sachin Kamat authored
Fixes the below warning: drivers/media/platform/timblogiw.c:81:31: warning: symbol 'timblogiw_tvnorms' was not declared. Should it be static? Signed-off-by:
-
Fabrizio Gazzato authored
This patch adds USB ID for alternative "Terratec Cinergy T Stick". Tested by a friend: works similarly to 0ccd:0093 version (af9035+tua9001) Signed-off-by:
Fabrizio Gazzato <fabrizio.gazzato@gmail.com> Acked-by:
-
