- 02 Aug, 2023 10 commits
-
-
Radu Pirea (NXP OSS) authored
The external trigger configuration for TJA1120 has changed. The PHY supports sampling of the LTC on rising and on falling edge. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230731091619.77961-7-radu-nicolae.pirea@oss.nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Radu Pirea (NXP OSS) authored
Add TJA1120 driver entry and its driver_data. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230731091619.77961-6-radu-nicolae.pirea@oss.nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Radu Pirea (NXP OSS) authored
PHY_BASIC_T1_FEATURES are not the right features supported by TJA1103 anymore. For example ethtool reports: [root@alarm ~]# ethtool end0 Settings for end0: Supported ports: [ TP ] Supported link modes: 100baseT1/Full 10baseT1L/Full 10baseT1L/Full is not supported by TJA1103 and supported ports list is not completed. The PHY also have a MII port. genphy_c45_pma_read_abilities implementation can detect the PHY features and they look like this. [root@alarm ~]# ethtool end0 Settings for end0: Supported ports: [ TP MII ] Supported link modes: 100baseT1/Full Supported pause frame use: Symmetric Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: 100baseT1/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 100Mb/s Duplex: Full Auto-negotiation: off master-slave cfg: forced master master-slave status: master Port: Twisted Pair PHYAD: 1 Transceiver: external MDI-X: Unknown Supports Wake-on: g Wake-on: d Link detected: yes SQI: 7/7 Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230731091619.77961-5-radu-nicolae.pirea@oss.nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Radu Pirea (NXP OSS) authored
Between TJA1120 and TJA1103 the hardware was improved, but some register addresses were changed and some bit fields were moved from one register to another. Introduce the nxp_c45_reg_field structure and its associated functions to abstract the differences between the PHYs. Remove the defined bits and register addresses that are not common between TJA1103 and TJA1120 and replace them with reg_fields and register addresses from phydev->drv->driver_data. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Link: https://lore.kernel.org/r/20230731091619.77961-4-radu-nicolae.pirea@oss.nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Radu Pirea (NXP OSS) authored
Remove RX BIST frame counters from the PHY statistics. In production mode, these counters are always read as 0. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230731091619.77961-3-radu-nicolae.pirea@oss.nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Radu Pirea (NXP OSS) authored
Remove the custom implementation of master/save setup and read status and use genphy_c45_config_aneg and genphy_c45_read_status since phylib has support for master/slave setup and master/slave status. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230731091619.77961-2-radu-nicolae.pirea@oss.nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Gavin Li says: ==================== virtio_net: add per queue interrupt coalescing support Currently, coalescing parameters are grouped for all transmit and receive virtqueues. This patch series add support to set or get the parameters for a specified virtqueue. When the traffic between virtqueues is unbalanced, for example, one virtqueue is busy and another virtqueue is idle, then it will be very useful to control coalescing parameters at the virtqueue granularity. Example command: $ ethtool -Q eth5 queue_mask 0x1 --coalesce tx-packets 10 Would set max_packets=10 to VQ 1. $ ethtool -Q eth5 queue_mask 0x1 --coalesce rx-packets 10 Would set max_packets=10 to VQ 0. $ ethtool -Q eth5 queue_mask 0x1 --show-coalesce Queue: 0 Adaptive RX: off TX: off stats-block-usecs: 0 sample-interval: 0 pkt-rate-low: 0 pkt-rate-high: 0 rx-usecs: 222 rx-frames: 0 rx-usecs-irq: 0 rx-frames-irq: 256 tx-usecs: 222 tx-frames: 0 tx-usecs-irq: 0 tx-frames-irq: 256 rx-usecs-low: 0 rx-frame-low: 0 tx-usecs-low: 0 tx-frame-low: 0 rx-usecs-high: 0 rx-frame-high: 0 tx-usecs-high: 0 tx-frame-high: 0 ==================== Link: https://lore.kernel.org/r/20230731070656.96411-1-gavinl@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Gavin Li authored
Enable per queue interrupt coalesce feature bit in driver and validate its dependency with control queue. Signed-off-by: Gavin Li <gavinl@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Heng Qi <hengqi@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20230731070656.96411-4-gavinl@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Gavin Li authored
Add interrupt_coalesce config in send_queue and receive_queue to cache user config. Send per virtqueue interrupt moderation config to underlying device in order to have more efficient interrupt moderation and cpu utilization of guest VM. Additionally, address all the VQs when updating the global configuration, as now the individual VQs configuration can diverge from the global configuration. Signed-off-by: Gavin Li <gavinl@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Heng Qi <hengqi@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20230731070656.96411-3-gavinl@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Gavin Li authored
Extract interrupt coalescing settings to a structure so that it could be reused in other data structures. Signed-off-by: Gavin Li <gavinl@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Heng Qi <hengqi@linux.alibaba.com> Link: https://lore.kernel.org/r/20230731070656.96411-2-gavinl@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 01 Aug, 2023 21 commits
-
-
Yue Haibing authored
This is never implemented since the beginning of git history. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230731140437.37056-1-yuehaibing@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Instead of allocating from 1 use proper xa_init flag, to protect ourselves from IDs wrapping back to 0. Fixes: 759ab1ed ("net: store netdevs in an xarray") Reported-by: Stephen Hemminger <stephen@networkplumber.org> Link: https://lore.kernel.org/all/20230728162350.2a6d4979@hermes.local/Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230731171159.988962-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Atul Raut authored
Since zero-length arrays are deprecated, we are replacing them with C99 flexible-array members. As a result, instead of declaring a zero-length array, use the new DECLARE_FLEX_ARRAY() helper macro. This fixes warnings such as: ./drivers/net/ethernet/apple/macmace.c:80:4-8: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) Signed-off-by: Atul Raut <rauji.raut@gmail.com> Link: https://lore.kernel.org/r/20230730231442.15003-1-rauji.raut@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Christian Marangi authored
Convert for loop to dsa_for_each macro to save some redundant write on unconnected/unused port and tidy things up. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20230730074113.21889-5-ansuelsmth@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Christian Marangi authored
Move qca8xxx hol fixup to separate function to tidy things up and to permit using a more efficent loop in future patch. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20230730074113.21889-4-ansuelsmth@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Christian Marangi authored
In preparation for multi-CPU support, set CPU port LOOKUP MEMBER outside the port loop and setup the LOOKUP MEMBER mask for user ports only to the first CPU port. This is to handle flooding condition where every CPU port is set as target and prevent packet duplication for unknown frames from user ports. Secondary CPU port LOOKUP MEMBER mask will be setup later when port_change_master will be implemented. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20230730074113.21889-3-ansuelsmth@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Christian Marangi authored
Address learning should initially be turned off by the driver for port operation in standalone mode, then the DSA core handles changes to it via ds->ops->port_bridge_flags(). Currently this is not the case for qca8k where learning is enabled unconditionally in qca8k_setup for every user port. Handle ports configured in standalone mode by making the learning configurable and not enabling it by default. Implement .port_pre_bridge_flags and .port_bridge_flags dsa ops to enable learning for bridge that request it and tweak .port_stp_state_set to correctly disable learning when port is configured in standalone mode. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20230730074113.21889-2-ansuelsmth@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Christian Marangi authored
Currently checksum is recalculated and dsa tag stripped even if we later don't find the dev. To improve code, exit early if we don't find the dev and skip additional operation on the skb since it will be freed anyway. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20230730074113.21889-1-ansuelsmth@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Paolo Abeni authored
Pedro Tammela says: ==================== net/sched: improve class lifetime handling Valis says[0]: ============ Three classifiers (cls_fw, cls_u32 and cls_route) always copy tcf_result struct into the new instance of the filter on update. This causes a problem when updating a filter bound to a class, as tcf_unbind_filter() is always called on the old instance in the success path, decreasing filter_cnt of the still referenced class and allowing it to be deleted, leading to a use-after-free. ============ Turns out these could have been spotted easily with proper warnings. Improve the current class lifetime with wrappers that check for overflow/underflow. While at it add an extack for when a class in use is deleted. [0] https://lore.kernel.org/all/20230721174856.3045-1-sec@valis.email/ ==================== Link: https://lore.kernel.org/r/20230728153537.1865379-1-pctammela@mojatatu.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Pedro Tammela authored
Add extack to warn that delete was rejected because the class is still in use Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Pedro Tammela authored
Add extack to warn that delete was rejected because the class is still in use Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Pedro Tammela authored
Add extack to warn that delete was rejected because the class is still in use Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Pedro Tammela authored
Add extack to warn that delete was rejected because the class is still in use Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Pedro Tammela authored
The 'filter_cnt' counter is used to control a Qdisc class lifetime. Each filter referecing this class by its id will eventually increment/decrement this counter in their respective 'add/update/delete' routines. As these operations are always serialized under rtnl lock, we don't need an atomic type like 'refcount_t'. It also means that we lose the overflow/underflow checks already present in refcount_t, which are valuable to hunt down bugs where the unsigned counter wraps around as it aids automated tools like syzkaller to scream in such situations. Wrap the open coded increment/decrement into helper functions and add overflow checks to the operations. Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Jakub Kicinski authored
Matthieu Baerts says: ==================== mptcp: cleanup and improvements in the selftests This small series of 4 patches adds some improvements in MPTCP selftests: - Patch 1 reworks the detailed report of mptcp_join.sh selftest to better display what went well or wrong per test. - Patch 2 adds colours (if supported, forced and/or not disabled) in mptcp_join.sh selftest output to help spotting issues. - Patch 3 modifies an MPTCP selftest tool to interact with the path-manager via Netlink to always look for errors if any. This makes sure odd behaviours can be seen in the logs and errors can be caught later if needed. - Patch 4 removes stdout and stderr redirections to /dev/null when using pm_nl_ctl if no errors are expected in order to log odd behaviours. ==================== Link: https://lore.kernel.org/r/20230730-upstream-net-next-20230728-mptcp-selftests-misc-v1-0-7e9cc530a9cd@tessares.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Matthieu Baerts authored
All pm_nl_ctl commands were muted. If there was an unexpected error with one of them, this was simply not visible in the logs, making the analysis very hard. It could also hide misuse of commands by mistake. Now the output is only muted when we do expect to have an error, e.g. when giving invalid arguments on purpose. Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20230730-upstream-net-next-20230728-mptcp-selftests-misc-v1-4-7e9cc530a9cd@tessares.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Matthieu Baerts authored
If a Netlink command for the MPTCP path-managers is not valid, it is important to check if there are errors. If yes, they need to be reported instead of being ignored and exiting without errors. Now if no replies are expected, an ACK from the kernelspace is asked by the userspace in order to always expect a reply. We can use the same buffer that is currently always >1024 bytes. Then we can check if there is an error (err->error), print it if any and report the error. After this modification, it is required to mute expected errors in mptcp_join.sh and pm_netlink.sh selftests: - when trying to add a bad endpoint, e.g. duplicated - when trying to set the two limits above the hard limit Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20230730-upstream-net-next-20230728-mptcp-selftests-misc-v1-3-7e9cc530a9cd@tessares.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Matthieu Baerts authored
Thanks to the parent commit, it is easy to change the output and add some colours to help spotting issues. The colours are not used if stdout is redirected or if NO_COLOR env var is set to 1 as specified in https://no-color.org. It is possible to force displaying the colours even if stdout is redirected by setting this env var: SELFTESTS_MPTCP_LIB_COLOR_FORCE=1 Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20230730-upstream-net-next-20230728-mptcp-selftests-misc-v1-2-7e9cc530a9cd@tessares.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Matthieu Baerts authored
This patch modifies how the detailed results are printed, mainly to improve what is displayed in case of issue: - Now the test name (title) is printed earlier, when starting the test if it is not intentionally skipped: by doing that, errors linked to a test will be printed after having written the test name and then avoid confusions. - Due to the previous item, it is required to add a new line after having printed the test name because in case of error with a command, it is better not to have the output in the middle of the screen. - Each check is printed on a dedicated line with aligned status (ok, skip, fail): it is easier to spot which one has failed, simpler to manage in the code not having to deal with alignment case by case and helpers can be used to uniform what is done. These helpers can also be useful later to do more actions depending on the results or change in one place what is printed. - Info messages have been reduced and aligned as well. And info messages about the creation of the default test files of 1 KB are no longer printed. Example: 001 no JOIN syn [ ok ] synack [ ok ] ack [ ok ] Or with a skip and a failure: 001 no JOIN syn [ ok ] synack [fail] got 42 JOIN[s] synack expected 0 Server ns stats (...) Client ns stats (...) ack [skip] Or with info: 104 Infinite map Test file (size 128 KB) for client Test file (size 128 KB) for server file received by server has inverted byte at 169 5 corrupted pkts syn [ ok ] synack [ ok ] While at it, verify_listener_events() now also print more info in case of failure and in pm_nl_check_endpoint(), the test is marked as failed instead of skipped if no ID has been given (internal selftest issue). Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20230730-upstream-net-next-20230728-mptcp-selftests-misc-v1-1-7e9cc530a9cd@tessares.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Yue Haibing authored
commit f421436a ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") introducted these but never implemented. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230729123456.36340-1-yuehaibing@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Shuah Khan authored
Fix input argument parsing paths to skip from their error legs. This fix helps to avoid false test failure reports without running the test. Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Reviewed-by: Anjali Kulkarni <anjali.k.kulkarni@oracle.com> Link: https://lore.kernel.org/r/20230729002403.4278-1-skhan@linuxfoundation.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 31 Jul, 2023 9 commits
-
-
Martin KaFai Lau authored
During unregister_netdevice_many_notify(), the ordering of our concerned function calls is like this: unregister_netdevice_many_notify dev_shutdown qdisc_put clsact_destroy tcx_uninstall The syzbot reproducer triggered a case that the qdisc refcnt is not zero during dev_shutdown(). tcx_uninstall() will then WARN_ON_ONCE(tcx_entry(entry)->miniq_active) because the miniq is still active and the entry should not be freed. The latter assumed that qdisc destruction happens before tcx teardown. This fix is to avoid tcx_uninstall() doing tcx_entry_free() when the miniq is still alive and let the clsact_destroy() do the free later, so that we do not assume any specific ordering for either of them. If still active, tcx_uninstall() does clear the entry when flushing out the prog/link. clsact_destroy() will then notice the "!tcx_entry_is_active()" and then does the tcx_entry_free() eventually. Fixes: e420bed0 ("bpf: Add fd-based tcx multi-prog infra with link support") Reported-by: syzbot+376a289e86a0fd02b9ba@syzkaller.appspotmail.com Reported-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Co-developed-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: syzbot+376a289e86a0fd02b9ba@syzkaller.appspotmail.com Tested-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/222255fe07cb58f15ee662e7ee78328af5b438e4.1690549248.git.daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Florian Fainelli authored
There is no need to spam the kernel log with such an indication, remove this message. Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230728183945.760531-1-florian.fainelli@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Yue Haibing authored
These are never implemented since introduction in commit d021c344 ("VSOCK: Introduce VM Sockets") Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20230729122036.32988-1-yuehaibing@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Yue Haibing authored
commit f9aab6f2 ("net/smc: immediate freeing in smc_lgr_cleanup_early()") left behind smc_lgr_schedule_free_work_fast() declaration. And since commit 349d4312 ("net/smc: fix kernel panic caused by race of smc_sock") smc_ib_modify_qp_reset() is not used anymore. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Link: https://lore.kernel.org/r/20230729121929.17180-1-yuehaibing@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Shuah Khan says: ==================== Connector/proc_filter test fixes The first patch fixes the LKFT reported compile error, second one adds .gitignore. ==================== Applying the first 2 patches, third one resent separately. Link: https://lore.kernel.org/r/cover.1690564372.git.skhan@linuxfoundation.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Shuah Khan authored
Add gitignore and poupulate it with test name - proc_filter Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/e3d04cc34e9af07909dc882b50fb1b6f1ce7705b.1690564372.git.skhan@linuxfoundation.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Shuah Khan authored
The test compile fails with following errors. Fix the Makefile CFLAGS to include KHDR_INCLUDES to pull in uapi defines. gcc -Wall proc_filter.c -o ../tools/testing/selftests/connector/proc_filter proc_filter.c: In function ‘send_message’: proc_filter.c:22:33: error: invalid application of ‘sizeof’ to incomplete type ‘struct proc_input’ 22 | sizeof(struct proc_input)) | ^~~~~~ proc_filter.c:42:19: note: in expansion of macro ‘NL_MESSAGE_SIZE’ 42 | char buff[NL_MESSAGE_SIZE]; | ^~~~~~~~~~~~~~~ proc_filter.c:22:33: error: invalid application of ‘sizeof’ to incomplete type ‘struct proc_input’ 22 | sizeof(struct proc_input)) | ^~~~~~ proc_filter.c:48:34: note: in expansion of macro ‘NL_MESSAGE_SIZE’ 48 | hdr->nlmsg_len = NL_MESSAGE_SIZE; | ^~~~~~~~~~~~~~~ ` Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Link: https://lore.kernel.org/all/CA+G9fYt=6ysz636XcQ=-KJp7vJcMZ=NjbQBrn77v7vnTcfP2cA@mail.gmail.com/Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/d0055c8cdf18516db8ba9edec99cfc5c08f32a7c.1690564372.git.skhan@linuxfoundation.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jan Sokolowski authored
Replace uses of i40e_status to as equivalent as possible error codes. Remove enum i40e_status as it is no longer needed Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230728171336.2446156-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Yue Haibing authored
commit 8a59f9d1 ("sock: Introduce sk->sk_prot->psock_update_sk_prot()") left behind tcp_bpf_get_proto() declaration. And tcp_v4_tw_remember_stamp() function is remove in ccb7c410 ("timewait_sock: Create and use getpeer op."). Since commit 68698970 ("tcp: simplify tcp_mark_skb_lost") tcp_skb_mark_lost_uncond_verify() declaration is not used anymore. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230729122644.10648-1-yuehaibing@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-