Since the async flip state check is done very late and
thus it can see potentially all the planes in the state
(due to the wm/ddb optimization) we need to move the
"can the requested plane do async flips at all?" check
much earlier. For this purpose we introduce
intel_async_flip_check_uapi() that gets called early during
the atomic check.

And for good measure we'll throw in a couple of basic checks:
- is the crtc active?
- was a modeset flagged?
- is+was the plane enabled?
Though atm all of those should be guaranteed by the fact
that the async flip can only be requested through the legacy
page flip ioctl.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: c3639f3b ("drm/i915: Use wm0 only during async flips for DG2")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214105532.13049-3-ville.syrjala@linux.intel.comReviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

data_rate==0 no longer means a plane is disabled, it could
also mean we want to use the minimum ddb allocation for it.
Hence we can't bail out early during ddb allocation or
else we'll simply forget to allocate any ddb for such planes.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: 6a4d8cc6 ("drm/i915: Don't allocate extra ddb during async flip for DG2")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214105532.13049-2-ville.syrjala@linux.intel.comReviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

Do mapping using CONTIGUOUS flag - otherwise
i915_gem_object_is_contiguous warn is triggered.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211209141817.16038-1-stanislav.lisovskiy@intel.com

Some users are suffering with PSR2 issues that are under debug or
issues that were root caused to panel firmware bugs, to make life of
those users easier here adding a option to disable PSR2 with kernel
parameters so they can still benefit from PSR1 power savings.

Using the same enable_psr that is current used to turn the whole
feature on or off and allowing user to select up to what PSR version
it should enable.
Right now users only set this parameter to 0 when they want to disable
PSR1 and PSR2 or don't add it at all leaving it to per-chip behavior
so it should not cause a bad impact on users.

v2:
- changing enable_psr values (Ville and Rodrigo)

Link: https://gitlab.freedesktop.org/drm/intel/-/issues/4951
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220224202523.993560-1-jose.souza@intel.com

Currently we are observing occasional screen flickering when
PSR2 selective fetch is enabled. More specifically glitch seems
to happen on full frame update when cursor moves to coords
x = -1 or y = -1.

According to Bspec SF Single full frame should not be set if
SF Partial Frame Enable is not set. This happened to be true for
ADLP as PSR2_MAN_TRK_CTL_ENABLE is always set and for ADL_P it's
actually "SF Partial Frame Enable" (Bit 31).

Setting "SF Partial Frame Enable" bit also on full update seems to
fix screen flickering.

Also make code more clear by setting PSR2_MAN_TRK_CTL_ENABLE
only if not on ADL_P. Bit 31 has different meaning in ADL_P.

Bspec: 49274

v2: Fix Mihai Harpau email address
v3: Modify commit message and remove unnecessary comment
Tested-by: Lyude Paul <lyude@redhat.com>
Fixes: 7f6002e5 ("drm/i915/display: Enable PSR2 selective fetch by default")
Reported-by: Lyude Paul <lyude@redhat.com>
Cc: Mihai Harpau <mharpau@gmail.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/5077Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225070228.855138-1-jouni.hogander@intel.com

VBT 249 update to support more TMDS clock rate 3.00G, 3.40G
and 5.94G. Refer to this new definition to configure max
TMDS clock rate for HDMI driver.

BSpec: 20124

v2: new subject

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303083802.5071-1-shawn.c.lee@intel.com

This is not supported for ADLP and is not needed.
Signed-off-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302231119.16876-1-swathi.dhanavanthri@intel.com

The VT-d spec requires (10.4.4 Global Command Register, TE
field) that:

Hardware implementations supporting DMA draining must drain
any in-flight DMA read/write requests queued within the
Root-Complex before completing the translation enable
command and reflecting the status of the command through
the TES field in the Global Status register.

Unfortunately, some integrated graphic devices fail to do
so after some kind of power state transition. As the
result, the system might stuck in iommu_disable_translati
on(), waiting for the completion of TE transition.

This adds RPLS to a quirk list for those devices and skips
TE disabling if the qurik hits.

Link: https://gitlab.freedesktop.org/drm/intel/-/issues/4898Tested-by: Raviteja Goud Talla <ravitejax.goud.talla@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302043256.191529-1-tejaskumarx.surendrakumar.upadhyay@intel.com

Remove the local onoff() implementation and adopt the
str_on_off() from linux/string_helpers.h.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225234631.3725943-4-lucas.demarchi@intel.com

Remove the local enableddisabled() implementation and adopt the
str_enabled_disabled() from linux/string_helpers.h.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225234631.3725943-3-lucas.demarchi@intel.com

Remove the local enabledisable() implementation and adopt the
str_enable_disable() from linux/string_helpers.h.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225234631.3725943-2-lucas.demarchi@intel.com

Remove the local yesno() implementation and adopt the str_yes_no() from
linux/string_helpers.h.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225234631.3725943-1-lucas.demarchi@intel.com

To catch up with recent rounds of pull requests
and get some drm-misc dependencies so we can merge
linux/string_helpers related changes.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Don't populate the read-only arrays on the stack but instead make
them static const and signed 8 bit ints. Also makes the object code a
little smaller.  Reformat the statements to clear up checkpatch warning.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223120923.239867-1-colin.i.king@gmail.com

Merge tag 'amd-drm-next-5.18-2022-02-25' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.18-2022-02-25:

amdgpu:
- Raven2 suspend/resume fix
- SDMA 5.2.6 updates
- VCN 3.1.2 updates
- SMU 13.0.5 updates
- DCN 3.1.5 updates
- Virtual display fixes
- SMU code cleanup
- Harvest fixes
- Expose benchmark tests via debugfs
- Drop no longer relevant gart aperture tests
- More RAS restructuring
- W=1 fixes
- PSR rework
- DP/VGA adapter fixes
- DP MST fixes
- GPUVM eviction fix
- GPU reset debugfs register dumping support
- Misc display fixes
- SR-IOV fix
- Aldebaran mGPU fix
- Add module parameter to disable XGMI for testing

amdkfd:
- IH ring overflow logging fixes
- CRIU fixes
- Misc fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225183535.5907-1-alexander.deucher@amd.com

Move intel_display_power_well_is_enabled() to intel_power_well.c, as a step
towards making the low-level power well internals (i915_power_well_ops/desc
structs) hidden.

Eventually the call to this function and in general accessing power
wells directly from elsewhere in the driver should be replaced by the
use of power domains.

No functional change.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222165137.1004194-9-imre.deak@intel.com

Add functions to get a power well's actual- and cached-enabled state,
name, domain mask and refcount, as a step towards making the low-level
power well internals (i915_power_well_ops/desc structs) hidden.

No functional change.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222165137.1004194-8-imre.deak@intel.com

Add a function to call a power well's sync_hw() hook, instead of
open-coding the same, as a step towards making the low-level
power well internals (i915_power_well_ops/desc structs) hidden.

The cached-enable state should be always up-to-date, so update it
whenever sync_hw() is called.

No functional change.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222165137.1004194-7-imre.deak@intel.com

Move the power well get/put/enable/disable hooks to the new
intel_display_power_well.c file. The motivation is to reduce the clutter
in intel_display_power.c, keeping the functionality related to power
domains in that file and moving the low-level power well functionality
to intel_display_power_well.c.

No functional change.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222165137.1004194-6-imre.deak@intel.com

Move the i915_power_well_regs struct into i915_power_well_ops. Most of
the power wells use the same ops/regs combination, so this saves some
space and also simplifies the platform power domain->power well
definitions.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222165137.1004194-5-imre.deak@intel.com

Commit d5ce34da
("drm/i915: Add state verification for the TypeC port mode")
added a verification to the TypeC AUX power well enable()/disable()
hooks to check if the TypeC port related to this power well is properly
locked. If the disabling happens asynchronously the verification is
skipped, since in this case the port is unlocked. The detection of
asnychronous disabling doesn't work as intended though, since the power
well's reference count is always 0 when its disable() hook is called
(and since there won't be any domain reference held for this power well
either, the verification is always skipped); remove the verification
from the disable() hook for now. In the power well's enable() hook the
power well's reference will be always >0 and there won't be any
asynchronous disabling pending for it, so we can drop the async refcount
check from there.

No functional change.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222165137.1004194-4-imre.deak@intel.com

Instead of open-coding the call of the power wells' enable()/disable()
hooks use the corresponding helper functions. This will also ensure that
the power well's cached-enable state is always up-to-date. Luckily the
lack of this updating hasn't been a problem, since the state either
didn't change (in intel_display_power_set_target_dc_state()), or got
updated subsequently (for vlv_cmnlane_wa(), in the following
intel_power_domains_sync_hw()).
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222165137.1004194-3-imre.deak@intel.com

The POWER_DOMAIN_TRANSCODER() macro depends on the
POWER_DOMAIN_TRANSCODER_A/B .. DSI_A/C enum values to be consecutive,
move POWER_DOMAIN_TRANSCODER_VDSC_PW2 after these to ensure this. The
wrong order didn't cause a problem, since the DSI_A/C domains are in
always-on power wells on all relevant platforms. The same power well
ends up being enabled/disabled when the VDSC_PW2 domain is selected
incorrectly.

While at it add a code comment about enum values that need to stay
consecutive.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222165137.1004194-2-imre.deak@intel.com

Use REG_FIELD_{PREP,GET} for completeness, and to avoid bitwise
operations with different sizes.

v2: Also use REG_FIELD_GET in skl_wm_level_from_reg_val() (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223103517.634229-1-jani.nikula@intel.com

This backmerges v5.17-rc6 so I can merge some amdgpu and some tegra changes on top.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'mediatek-drm-next-5.18' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next

Mediatek DRM Next for Linux 5.18

1. Transfer display binding document to yaml format.
2. Add mt8195 display device binding.
3. Allow commands to be sent during video mode.
4. Add wait_for_event for crtc disable by cmdq.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1645934583-2018-1-git-send-email-chunkuang.hu@kernel.org

Pull irq fix from Thomas Gleixner:
 "A single fix for a regression caused by the recent PCI/MSI rework
  which resulted in a recursive locking problem in the VMD driver.

  The cure is to cache the relevant information upfront instead of
  retrieving it at runtime"

* tag 'irq-urgent-2022-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  PCI: vmd: Prevent recursive locking on interrupt allocation

Pull dma-mapping fix from Christoph Hellwig:

 - fix a swiotlb info leak (Halil Pasic)

* tag 'dma-mapping-5.17-1' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: fix info leak with DMA_FROM_DEVICE

Pull pin control fixes from Linus Walleij:

 - Fix some drive strength and pull-up code in the K210 driver.

 - Add the Alder Lake-M ACPI ID so it starts to work properly.

 - Use a static name for the StarFive GPIO irq_chip, forestalling an
   upcoming fixes series from Marc Zyngier.

 - Fix an ages old bug in the Tegra 186 driver where we were indexing at
   random into struct and being lucky getting the right member.

* tag 'pinctrl-v5-17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  gpio: tegra186: Fix chip_data type confusion
  pinctrl: starfive: Use a static name for the GPIO irq_chip
  pinctrl: tigerlake: Revert "Add Alder Lake-M ACPI ID"
  pinctrl: k210: Fix bias-pull-up
  pinctrl: fix loop in k210_pinconf_get_drive()

mtk_drm_crtc_atomic_disable will send an async cmd to cmdq driver,
so it may not finish when cmdq_suspend is called sometimes.

Add wait_for_event after sending async disable plane cmd to make
sure the lastest cmd is done before cmdq_suspend.
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20211202064039.20797-2-jason-jh.lin@mediatek.com/

Pull tracing fixes from Steven Rostedt:

 - rtla (Real-Time Linux Analysis tool):
    - fix typo in man page
    - Update API -e to -E before it is released
    - Error message fix and memory leak fix

 - Partially uninline trace event soft disable to shrink text

 - Fix function graph start up test

 - Have triggers affect the trace instance they are in and not top level

 - Have osnoise sleep in the units it says it uses

 - Remove unused ftrace stub function

 - Remove event probe redundant info from event in the buffer

 - Fix group ownership setting in tracefs

 - Ensure trace buffer is minimum size to prevent crashes

* tag 'trace-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  rtla/osnoise: Fix error message when failing to enable trace instance
  rtla/osnoise: Free params at the exit
  rtla/hist: Make -E the short version of --entries
  tracing: Fix selftest config check for function graph start up test
  tracefs: Set the group ownership in apply_options() not parse_options()
  tracing/osnoise: Make osnoise_main to sleep for microseconds
  ftrace: Remove unused ftrace_startup_enable() stub
  tracing: Ensure trace buffer is at least 4096 bytes large
  tracing: Uninline trace_trigger_soft_disabled() partly
  eprobes: Remove redundant event type information
  tracing: Have traceon and traceoff trigger honor the instance
  tracing: Dump stacktrace trigger to the corresponding instance
  rtla: Fix systme -> system typo on man page

Pull memblock fix from Mike Rapoport:
 "Use kfree() to release kmalloced memblock regions

  memblock.{reserved,memory}.regions may be allocated using kmalloc()
  in memblock_double_array(). Use kfree() to release these kmalloced
  regions"

* tag 'fixes-2022-02-26' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  memblock: use kfree() to release kmalloced memblock regions

Merge misc fixes from Andrew Morton:
 "12 patches.

  Subsystems affected by this patch series: MAINTAINERS, mailmap, memfd,
  and mm (hugetlb, kasan, hugetlbfs, pagemap, selftests, memcg, and
  slab)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  selftests/memfd: clean up mapping in mfd_fail_write
  mailmap: update Roman Gushchin's email
  MAINTAINERS, SLAB: add Roman as reviewer, git tree
  MAINTAINERS: add Shakeel as a memcg co-maintainer
  MAINTAINERS: remove Vladimir from memcg maintainers
  MAINTAINERS: add Roman as a memcg co-maintainer
  selftest/vm: fix map_fixed_noreplace test failure
  mm: fix use-after-free bug when mm->mmap is reused after being freed
  hugetlbfs: fix a truncation issue in hugepages parameter
  kasan: test: prevent cache merging in kmem_cache_double_destroy
  mm/hugetlb: fix kernel crash with hugetlb mremap
  MAINTAINERS: add sysctl-next git tree

Pull RISC-V fixes from Palmer Dabbelt:

 - A fix for the K210 sdcard defconfig, to avoid using a
   fixed delay for the root FS

 - A fix to make sure there's a proper call frame for
   trace_hardirqs_{on,off}().

* tag 'riscv-for-linus-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: fix oops caused by irqsoff latency tracer
  riscv: fix nommu_k210_sdcard_defconfig

Pull xfs fixes from Darrick Wong:
 "Nothing exciting, just more fixes for not returning sync_filesystem
  error values (and eliding it when it's not necessary).

  Summary:

   - Only call sync_filesystem when we're remounting the filesystem
     readonly readonly, and actually check its return value"

* tag 'xfs-5.17-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: only bother with sync_filesystem during readonly remount

Running the memfd script ./run_hugetlbfs_test.sh will often end in error
as follows:

    memfd-hugetlb: CREATE
    memfd-hugetlb: BASIC
    memfd-hugetlb: SEAL-WRITE
    memfd-hugetlb: SEAL-FUTURE-WRITE
    memfd-hugetlb: SEAL-SHRINK
    fallocate(ALLOC) failed: No space left on device
    ./run_hugetlbfs_test.sh: line 60: 166855 Aborted                 (core dumped) ./memfd_test hugetlbfs
    opening: ./mnt/memfd
    fuse: DONE

If no hugetlb pages have been preallocated, run_hugetlbfs_test.sh will
allocate 'just enough' pages to run the test.  In the SEAL-FUTURE-WRITE
test the mfd_fail_write routine maps the file, but does not unmap.  As a
result, two hugetlb pages remain reserved for the mapping.  When the
fallocate call in the SEAL-SHRINK test attempts allocate all hugetlb
pages, it is short by the two reserved pages.

Fix by making sure to unmap in mfd_fail_write.

Link: https://lkml.kernel.org/r/20220219004340.56478-1-mike.kravetz@oracle.comSigned-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I'm moving to a @linux.dev account. Map my old addresses.

Link: https://lkml.kernel.org/r/20220221200006.416377-1-roman.gushchin@linux.devSigned-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The slab code has an overlap with kmem accounting, where Roman has done
a lot of work recently and it would be useful to make sure he's CC'd on
patches that potentially affect it.  Thus add him as a reviewer for the
SLAB subsystem.

Also while at it, add the link to slab git tree.

Link: https://lkml.kernel.org/r/20220222103104.13241-1-vbabka@suse.czSigned-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I have been contributing and reviewing to the memcg codebase for last
couple of years.  So, making it official.

Link: https://lkml.kernel.org/r/20220224060148.4092228-1-shakeelb@google.comSigned-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>