- 20 Dec, 2017 39 commits
-
-
Stafford Horne authored
[ Upstream commit 154e67cd ] Was getting the following error with allmodconfig: ERROR: "__get_user_bad" [lib/test_user_copy.ko] undefined! This was simply a missing break statement, causing an unwanted fall through. Signed-off-by:
Stafford Horne <shorne@gmail.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Shishkin authored
[ Upstream commit 340837f9 ] This adds Intel(R) Trace Hub PCI ID for Gemini Lake SOC. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
-
Jiri Pirko authored
[ Upstream commit e9093b11 ] The num_rec field is 8 bit, so the maximal count number is 255. This fixes vlans learning not being enabled for wider ranges than 255. Fixes: a4feea74 ("mlxsw: reg: Add Switch Port VLAN MAC Learning register definition") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jiri Pirko authored
[ Upstream commit f004ec06 ] The num_rec field is 8 bit, so the maximal count number is 255. This fixes vlans not being enabled for wider ranges than 255. Fixes: b2e345f9 ("mlxsw: reg: Add Switch Port VID and Switch Port VLAN Membership registers definitions") Signed-off-by:
-
Vlad Yasevich authored
[ Upstream commit 37c343b4 ] When we notify peers of potential changes, it's also good to update IGMP memberships. For example, during VM migration, updating IGMP memberships will redirect existing multicast streams to the VM at the new location. Signed-off-by:
Vladislav Yasevich <vyasevic@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Matthias Kaehlcke authored
[ Upstream commit 23f963e9 ] This fixes the following warning when building with clang and CONFIG_DMA_ENGINE_RAID=n : drivers/dma/dmaengine.c:1102:11: error: array index 2 is past the end of the array (which contains 1 element) [-Werror,-Warray-bounds] return &unmap_pool[2]; ^ ~ drivers/dma/dmaengine.c:1083:1: note: array 'unmap_pool' declared here static struct dmaengine_unmap_pool unmap_pool[] = { ^ drivers/dma/dmaengine.c:1104:11: error: array index 3 is past the end of the array (which contains 1 element) [-Werror,-Warray-bounds] return &unmap_pool[3]; ^ ~ drivers/dma/dmaengine.c:1083:1: note: array 'unmap_pool' declared here static struct dmaengine_unmap_pool unmap_pool[] = { Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit 6e526fdf ] Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. The endpoints are specifically dereferenced in the i2400m_bootrom_init path during probe (e.g. in i2400mu_tx_bulk_out). Fixes: f398e424 ("i2400m/USB: probe/disconnect, dev init/shutdown and reset backends") Cc: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Tahsin Erdogan authored
[ Upstream commit 4a3a485b ] When WB_registered flag is not set, wb_queue_work() skips queuing the work, but does not perform the necessary clean up. In particular, if work->auto_free is true, it should free the memory. The leak condition can be reprouced by following these steps: mount /dev/sdb /mnt/sdb /* In qemu console: device_del sdb */ umount /dev/sdb Above will result in a wb_queue_work() call on an unregistered wb and thus leak memory. Reported-by:
John Sperbeck <jsperbeck@google.com> Signed-off-by:
Tahsin Erdogan <tahsin@google.com> Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 4ca60d08 ] consider a bridge with mtu 9000, but end host sending smaller packets to another host with mtu < 9000. In this case, after reassembly, bridge+defrag would refragment, and then attempt to send the reassembled packet as long as it was below 9k. Instead we have to cap by the largest fragment size seen. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Tomi Valkeinen authored
[ Upstream commit 9fa1d753 ] omap_gem_dmabuf_mmap() returns an error (with a WARN) when called for a buffer which is allocated with dma_alloc_*(). This prevents dmabuf mmap from working on SoCs without DMM, e.g. AM4 and OMAP3. I could not find any reason for omap_gem_dmabuf_mmap() rejecting such buffers, and just removing the if() fixes the limitation. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Dmitry Torokhov authored
[ Upstream commit a4c2a131 ] TUXEDO BU1406 does not implement active multiplexing mode properly, and takes around 550 ms in i8042_set_mux_mode(). Given that the device does not have external AUX port, there is no downside in disabling the MUX mode. Reported-by:
Paul Menzel <pmenzel@molgen.mpg.de> Suggested-by:
Vojtech Pavlik <vojtech@suse.cz> Reviewed-by:
Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
NeilBrown authored
[ Upstream commit 800a938f ] If you write "-2 -3 -4" to the "versions" file, it will notice that no versions are enabled, and nfsd_reset_versions() is called. This enables all major versions, not no minor versions. So we lose the invariant that NFSv4 is only advertised when at least one minor is enabled. Fix the code to explicitly enable minor versions for v4, change it to use nfsd_vers() to test and set, and simplify the code. Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
NeilBrown authored
[ Upstream commit 928c6fb3 ] Current code will return 1 if the version is supported, and -1 if it isn't. This is confusing and inconsistent with the one place where this is used. So change to return 1 if it is supported, and zero if not. i.e. an error is never returned. Signed-off-by:
-
Doug Berger authored
[ Upstream commit 6be371b0 ] When using the internal PHY it must be powered up when the MII is probed or the PHY will not be detected. Since the PHY is powered up at reset this has not been a problem. However, when the kernel is restarted with kexec the PHY will likely be powered down when the kernel starts so it will not be detected and the Ethernet link will not be established. This commit explicitly powers up the internal PHY when the GENET driver is probed to correct this behavior. Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
Doug Berger <opendmb@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Doug Berger authored
[ Upstream commit 7627409c ] Since the internal PHY is powered up during the open and resume functions it should be powered back down if the functions fail. Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
-
Doug Berger authored
[ Upstream commit eca4bad7 ] The reserved gphy_rev value of 0x01ff must be tested before the old or new scheme for GPHY major versioning are tested, otherwise it will be treated as 0xff00 according to the old scheme. Fixes: b04a2f5b ("net: bcmgenet: add support for new GENET PHY revision scheme") Signed-off-by:
-
Doug Berger authored
[ Upstream commit 1ad3d225 ] The gap between the Tx status counters and the Rx RUNT counters is now being added to allow correct reporting of the registers. Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
-
Doug Berger authored
[ Upstream commit ffff7132 ] The location of the RBUF overflow and error counters has moved between different version of the GENET MAC. This commit corrects the driver to read from the correct locations depending on the version of the GENET MAC. Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
-
Alexander Potapenko authored
[ Upstream commit 9f138fa6 ] KMSAN reports a use of uninitialized memory in put_cmsg() because msg.msg_flags in recvfrom haven't been initialized properly. The flag values don't affect the result on this path, but it's still a good idea to initialize them explicitly. Signed-off-by:
Alexander Potapenko <glider@google.com> Signed-off-by:
-
Andrea Arcangeli authored
[ Upstream commit 46aa6a30 ] linux/tools/testing/selftests/vm $ make gcc -Wall -I ../../../../usr/include compaction_test.c -lrt -o /compaction_test /usr/lib/gcc/x86_64-pc-linux-gnu/4.9.4/../../../../x86_64-pc-linux-gnu/bin/ld: cannot open output file /compaction_test: Permission denied collect2: error: ld returned 1 exit status make: *** [../lib.mk:54: /compaction_test] Error 1 Since commit a8ba798b ("selftests: enable O and KBUILD_OUTPUT") selftests/vm build fails if run from the "selftests/vm" directory, but it works in the selftests/ directory. It's quicker to be able to do a local vm-only build after a tree wipe and this patch allows for it again. Link: http://lkml.kernel.org/r/20170302173738.18994-4-aarcange@redhat.comSigned-off-by:
Andrea Arcangeli <aarcange@redhat.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Andrea Arcangeli authored
[ Upstream commit 6bbc4a41 ] __do_fault assumes vmf->page has been initialized and is valid if VM_FAULT_NOPAGE is not returned by vma->vm_ops->fault(vma, vmf). handle_userfault() in turn should return VM_FAULT_NOPAGE if it doesn't return VM_FAULT_SIGBUS or VM_FAULT_RETRY (the other two possibilities). This VM_FAULT_NOPAGE case is only invoked when signal are pending and it didn't matter for anonymous memory before. It only started to matter since shmem was introduced. hugetlbfs also takes a different path and doesn't exercise __do_fault. Link: http://lkml.kernel.org/r/20170228154201.GH5816@redhat.comSigned-off-by:
Dmitry Vyukov <dvyukov@google.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by:
-
Guoqing Jiang authored
[ Upstream commit 9c8043f3 ] To avoid memory leak, we need to free the cinfo which is allocated when node join cluster. Reviewed-by:
Guoqing Jiang <gqjiang@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Javier Martinez Canillas authored
[ Upstream commit fd567653 ] The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
-
Ilan peer authored
commit 57629915 upstream. The code was setting the capabilities byte to zero, after it was already properly set previously. Fix it. The bug was found while debugging hwsim mesh tests failures that happened since the commit mentioned below. Fixes: 76f43b4c ("mac80211: Remove invalid flag operations in mesh TSF synchronization") Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Reviewed-by:
Masashi Honma <masashi.honma@gmail.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Cc: Richard Schütz <rschuetz@uni-koblenz.de> Cc: Mathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de> Signed-off-by:
-
Eric Biggers authored
commit 4dca6ea1 upstream. When the request_key() syscall is not passed a destination keyring, it links the requested key (if constructed) into the "default" request-key keyring. This should require Write permission to the keyring. However, there is actually no permission check. This can be abused to add keys to any keyring to which only Search permission is granted. This is because Search permission allows joining the keyring. keyctl_set_reqkey_keyring(KEY_REQKEY_DEFL_SESSION_KEYRING) then will set the default request-key keyring to the session keyring. Then, request_key() can be used to add keys to the keyring. Both negatively and positively instantiated keys can be added using this method. Adding negative keys is trivial. Adding a positive key is a bit trickier. It requires that either /sbin/request-key positively instantiates the key, or that another thread adds the key to the process keyring at just the right time, such that request_key() misses it initially but then finds it in construct_alloc_key(). Fix this bug by checking for Write permission to the keyring in construct_get_dest_keyring() when the default keyring is being used. We don't do the permission check for non-default keyrings because that was already done by the earlier call to lookup_user_key(). Also, request_key_and_link() is currently passed a 'struct key *' rather than a key_ref_t, so the "possessed" bit is unavailable. We also don't do the permission check for the "requestor keyring", to continue to support the use case described by commit 8bbf4976 ("KEYS: Alter use of key instantiation link-to-keyring argument") where /sbin/request-key recursively calls request_key() to add keys to the original requestor's destination keyring. (I don't know of any users who actually do that, though...) Fixes: 3e30148c ("[PATCH] Keys: Make request-key create an authorisation key") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Chandan Rajendra authored
commit 9d5afec6 upstream. On a ppc64 machine, when mounting a fuzzed ext2 image (generated by fsfuzzer) the following call trace is seen, VFS: brelse: Trying to free free buffer WARNING: CPU: 1 PID: 6913 at /root/repos/linux/fs/buffer.c:1165 .__brelse.part.6+0x24/0x40 .__brelse.part.6+0x20/0x40 (unreliable) .ext4_find_entry+0x384/0x4f0 .ext4_lookup+0x84/0x250 .lookup_slow+0xdc/0x230 .walk_component+0x268/0x400 .path_lookupat+0xec/0x2d0 .filename_lookup+0x9c/0x1d0 .vfs_statx+0x98/0x140 .SyS_newfstatat+0x48/0x80 system_call+0x58/0x6c This happens because the directory that ext4_find_entry() looks up has inode->i_size that is less than the block size of the filesystem. This causes 'nblocks' to have a value of zero. ext4_bread_batch() ends up not reading any of the directory file's blocks. This renders the entries in bh_use[] array to continue to have garbage data. buffer_uptodate() on bh_use[0] can then return a zero value upon which brelse() function is invoked. This commit fixes the bug by returning -ENOENT when the directory file has no associated blocks. Reported-by:
Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by:
Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by:
-
Eryu Guan authored
commit c894aa97 upstream. Currently, fallocate(2) with KEEP_SIZE followed by a fdatasync(2) then crash, we'll see wrong allocated block number (stat -c %b), the blocks allocated beyond EOF are all lost. fstests generic/468 exposes this bug. Commit 67a7d5f5 ("ext4: fix fdatasync(2) after extent manipulation operations") fixed all the other extent manipulation operation paths such as hole punch, zero range, collapse range etc., but forgot the fallocate case. So similarly, fix it by recording the correct journal tid in ext4 inode in fallocate(2) path, so that ext4_sync_file() will wait for the right tid to be committed on fdatasync(2). This addresses the test failure in xfstests test generic/468. Signed-off-by:
Eryu Guan <eguan@redhat.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Adam Wallis authored
commit 6f6a23a2 upstream. Commit adfa543e ("dmatest: don't use set_freezable_with_signal()") introduced a bug (that is in fact documented by the patch commit text) that leaves behind a dangling pointer. Since the done_wait structure is allocated on the stack, future invocations to the DMATEST can produce undesirable results (e.g., corrupted spinlocks). Commit a9df21e3 ("dmaengine: dmatest: warn user when dma test times out") attempted to WARN the user that the stack was likely corrupted but did not fix the actual issue. This patch fixes the issue by pushing the wait queue and callback structs into the the thread structure. If a failure occurs due to time, dmaengine_terminate_all will force the callback to safely call wake_up_all() without possibility of using a freed pointer. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=197605 Fixes: adfa543e ("dmatest: don't use set_freezable_with_signal()") Reviewed-by:
Sinan Kaya <okaya@codeaurora.org> Suggested-by:
Shunyong Yang <shunyong.yang@hxt-semitech.com> Signed-off-by:
Adam Wallis <awallis@codeaurora.org> Signed-off-by:
-
Steven Rostedt authored
commit f73c52a5 upstream. Daniel Wagner reported a crash on the BeagleBone Black SoC. This is a single CPU architecture, and does not have a functional arch_send_call_function_single_ipi() implementation which can crash the kernel if that is called. As it only has one CPU, it shouldn't be called, but if the kernel is compiled for SMP, the push/pull RT scheduling logic now calls it for irq_work if the one CPU is overloaded, it can use that function to call itself and crash the kernel. Ideally, we should disable the SCHED_FEAT(RT_PUSH_IPI) if the system only has a single CPU. But SCHED_FEAT is a constant if sched debugging is turned off. Another fix can also be used, and this should also help with normal SMP machines. That is, do not initiate the pull code if there's only one RT overloaded CPU, and that CPU happens to be the current CPU that is scheduling in a lower priority task. Even on a system with many CPUs, if there's many RT tasks waiting to run on a single CPU, and that CPU schedules in another RT task of lower priority, it will initiate the PULL logic in case there's a higher priority RT task on another CPU that is waiting to run. But if there is no other CPU with waiting RT tasks, it will initiate the RT pull logic on itself (as it still has RT tasks waiting to run). This is a wasted effort. Not only does this help with SMP code where the current CPU is the only one with RT overloaded tasks, it should also solve the issue that Daniel encountered, because it will prevent the PULL logic from executing, as there's only one CPU on the system, and the check added here will cause it to exit the RT pull code. Reported-by:
Daniel Wagner <wagi@monom.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by:
Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-rt-users <linux-rt-users@vger.kernel.org> Fixes: 4bdced5c ("sched/rt: Simplify the IPI based RT balancing logic") Link: http://lkml.kernel.org/r/20171202130454.4cbbfe8d@vmware.local.homeSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Mathias Nyman authored
commit 5d9b70f7 upstream. Avoid null pointer dereference if some function is walking through the devs array accessing members of a new virt_dev that is mid allocation. Add the virt_dev to xhci->devs[i] _after_ the virt_device and all its members are properly allocated. issue found by KASAN: null-ptr-deref in xhci_find_slot_id_by_port "Quick analysis suggests that xhci_alloc_virt_device() is not mutex protected. If so, there is a time frame where xhci->devs[slot_id] is set but not fully initialized. Specifically, xhci->devs[i]->udev can be NULL." Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Sukumar Ghorai authored
commit a0085f25 upstream. BT-Controller connected as platform non-root-hub device and usb-driver initialize such device with wakeup disabled, Ref. usb_new_device(). At present wakeup-capability get enabled by hid-input device from usb function driver(e.g. BT HID device) at runtime. Again some functional driver does not set usb-wakeup capability(e.g LE HID device implement as HID-over-GATT), and can't wakeup the host on USB. Most of the device operation (such as mass storage) initiated from host (except HID) and USB wakeup aligned with host resume procedure. For BT device, usb-wakeup capability need to enable form btusc driver as a generic solution for multiple profile use case and required for USB remote wakeup (in-bus wakeup) while host is suspended. Also usb-wakeup feature need to enable/disable with HCI interface up and down. Signed-off-by:
Sukumar Ghorai <sukumar.ghorai@intel.com> Signed-off-by:
Amit K Bag <amit.k.bag@intel.com> Acked-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Cc: Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
-
Yan, Zheng authored
commit 040d7860 upstream. Negative child dentry holds reference on inode's alias, it makes d_prune_aliases() do nothing. Signed-off-by:
"Yan, Zheng" <zyan@redhat.com> Reviewed-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Shuah Khan authored
commit be6123df upstream. stub_send_ret_submit() handles urb with a potential null transfer_buffer, when it replays a packet with potential malicious data that could contain a null buffer. Add a check for the condition when actual_length > 0 and transfer_buffer is null. Reported-by:
Secunia Research <vuln@secunia.com> Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Alan Stern authored
commit 48a4ff1c upstream. A malicious USB device with crafted descriptors can cause the kernel to access unallocated memory by setting the bNumInterfaces value too high in a configuration descriptor. Although the value is adjusted during parsing, this adjustment is skipped in one of the error return paths. This patch prevents the problem by setting bNumInterfaces to 0 initially. The existing code already sets it to the proper value after parsing is complete. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
David Kozub authored
commit 62354454 upstream. There is another JMS567-based USB3 UAS enclosure (152d:0578) that fails with the following error: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [sda] tag#0 Sense Key : Illegal Request [current] [sda] tag#0 Add. Sense: Invalid field in cdb The issue occurs both with UAS (occasionally) and mass storage (immediately after mounting a FS on a disk in the enclosure). Enabling US_FL_BROKEN_FUA quirk solves this issue. This patch adds an UNUSUAL_DEV with US_FL_BROKEN_FUA for the enclosure for both UAS and mass storage. Signed-off-by:
David Kozub <zub@linux.fjfi.cvut.cz> Acked-by:
-
Changbin Du authored
commit 90e406f9 upstream. The default NR_CPUS can be very large, but actual possible nr_cpu_ids usually is very small. For my x86 distribution, the NR_CPUS is 8192 and nr_cpu_ids is 4. About 2 pages are wasted. Most machines don't have so many CPUs, so define a array with NR_CPUS just wastes memory. So let's allocate the buffer dynamically when need. With this change, the mutext tracing_cpumask_update_lock also can be removed now, which was used to protect mask_str. Link: http://lkml.kernel.org/r/1512013183-19107-1-git-send-email-changbin.du@intel.com Fixes: 36dfe925 ("ftrace: make use of tracing_cpumask") Signed-off-by:
Changbin Du <changbin.du@intel.com> Signed-off-by:
-
NeilBrown authored
commit 302ec300 upstream. Commit ecc0c469 ("autofs: don't fail mount for transient error") was meant to replace an 'if' with a 'switch', but instead added the 'switch' leaving the case in place. Link: http://lkml.kernel.org/r/87zi6wstmw.fsf@notabene.neil.brown.name Fixes: ecc0c469 ("autofs: don't fail mount for transient error") Reported-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Eric Biggers authored
commit ecaaab56 upstream. When asked to encrypt or decrypt 0 bytes, both the generic and x86 implementations of Salsa20 crash in blkcipher_walk_done(), either when doing 'kfree(walk->buffer)' or 'free_page((unsigned long)walk->page)', because walk->buffer and walk->page have not been initialized. The bug is that Salsa20 is calling blkcipher_walk_done() even when nothing is in 'walk.nbytes'. But blkcipher_walk_done() is only meant to be called when a nonzero number of bytes have been provided. The broken code is part of an optimization that tries to make only one call to salsa20_encrypt_bytes() to process inputs that are not evenly divisible by 64 bytes. To fix the bug, just remove this "optimization" and use the blkcipher_walk API the same way all the other users do. Reproducer: #include <linux/if_alg.h> #include <sys/socket.h> #include <unistd.h> int main() { int algfd, reqfd; struct sockaddr_alg addr = { .salg_type = "skcipher", .salg_name = "salsa20", }; char key[16] = { 0 }; algfd = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(algfd, (void *)&addr, sizeof(addr)); reqfd = accept(algfd, 0, 0); setsockopt(algfd, SOL_ALG, ALG_SET_KEY, key, sizeof(key)); read(reqfd, key, sizeof(key)); } Reported-by:
syzbot <syzkaller@googlegroups.com> Fixes: eb6f13eb ("[CRYPTO] salsa20_generic: Fix multi-page processing") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Eric Biggers authored
commit af3ff804 upstream. Because the HMAC template didn't check that its underlying hash algorithm is unkeyed, trying to use "hmac(hmac(sha3-512-generic))" through AF_ALG or through KEYCTL_DH_COMPUTE resulted in the inner HMAC being used without having been keyed, resulting in sha3_update() being called without sha3_init(), causing a stack buffer overflow. This is a very old bug, but it seems to have only started causing real problems when SHA-3 support was added (requires CONFIG_CRYPTO_SHA3) because the innermost hash's state is ->import()ed from a zeroed buffer, and it just so happens that other hash algorithms are fine with that, but SHA-3 is not. However, there could be arch or hardware-dependent hash algorithms also affected; I couldn't test everything. Fix the bug by introducing a function crypto_shash_alg_has_setkey() which tests whether a shash algorithm is keyed. Then update the HMAC template to require that its underlying hash algorithm is unkeyed. Here is a reproducer: #include <linux/if_alg.h> #include <sys/socket.h> int main() { int algfd; struct sockaddr_alg addr = { .salg_type = "hash", .salg_name = "hmac(hmac(sha3-512-generic))", }; char key[4096] = { 0 }; algfd = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(algfd, (const struct sockaddr *)&addr, sizeof(addr)); setsockopt(algfd, SOL_ALG, ALG_SET_KEY, key, sizeof(key)); } Here was the KASAN report from syzbot: BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:341 [inline] BUG: KASAN: stack-out-of-bounds in sha3_update+0xdf/0x2e0 crypto/sha3_generic.c:161 Write of size 4096 at addr ffff8801cca07c40 by task syzkaller076574/3044 CPU: 1 PID: 3044 Comm: syzkaller076574 Not tainted 4.14.0-mm1+ #25 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x25b/0x340 mm/kasan/report.c:409 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x137/0x190 mm/kasan/kasan.c:267 memcpy+0x37/0x50 mm/kasan/kasan.c:303 memcpy include/linux/string.h:341 [inline] sha3_update+0xdf/0x2e0 crypto/sha3_generic.c:161 crypto_shash_update+0xcb/0x220 crypto/shash.c:109 shash_finup_unaligned+0x2a/0x60 crypto/shash.c:151 crypto_shash_finup+0xc4/0x120 crypto/shash.c:165 hmac_finup+0x182/0x330 crypto/hmac.c:152 crypto_shash_finup+0xc4/0x120 crypto/shash.c:165 shash_digest_unaligned+0x9e/0xd0 crypto/shash.c:172 crypto_shash_digest+0xc4/0x120 crypto/shash.c:186 hmac_setkey+0x36a/0x690 crypto/hmac.c:66 crypto_shash_setkey+0xad/0x190 crypto/shash.c:64 shash_async_setkey+0x47/0x60 crypto/shash.c:207 crypto_ahash_setkey+0xaf/0x180 crypto/ahash.c:200 hash_setkey+0x40/0x90 crypto/algif_hash.c:446 alg_setkey crypto/af_alg.c:221 [inline] alg_setsockopt+0x2a1/0x350 crypto/af_alg.c:254 SYSC_setsockopt net/socket.c:1851 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1830 entry_SYSCALL_64_fastpath+0x1f/0x96 Reported-by:
-
- 16 Dec, 2017 1 commit
-
-
Greg Kroah-Hartman authored
-
