- 28 Jul, 2020 20 commits
-
-
Laurent Pinchart authored
Extend the Kconfig option description by listing the i.MX7 and i.MX8M SoCs, as they are supported by the same driver. Replace the list of SoCs in the short description with just "(e)LCDIF LCD controller" to avoid expanding it further in the future as support for more SoCs is added. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Emil Velikov <emil.l.velikov@gmail.com> Reviewed-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
-
Laurent Pinchart authored
The debug0 and ipversion fields of the mxsfb_devdata structure are unused. Remove them. Signed-off-by:
-
Laurent Pinchart authored
Enable vblank handling when the CRTC is turned on and disable it when it is turned off. This requires moving vblank init after the KMS pipeline initialisation, otherwise drm_vblank_init() gets called with 0 CRTCs. Signed-off-by:
-
Laurent Pinchart authored
The driver attempts agressive power management by enabling and disabling the AXI clock around register accesses. This results in attempts to enable and disable the clock in the IRQ handler, which is a no-go as preparing or unpreparing the clock may sleep. On the other hand, the driver enables the AXI clock when enabling the CRTC and keeps it enabled until the CRTC is disabled. This is correct, and renders the power management attempt pointless, as interrupts are not supposed to occur when the CRTC is off. The same reasoning can be applied to the CRTC .enable_vblank() and .disable_vblank() that are not supposed to be called when the CRTC off and thus don't require manual handling of the AXI clock. Furthermore, vblank handling is never enabled, which results in the vblank enable and disable handlers never being called. To fix this, remove the manual clock handling in the IRQ, the CRTC .enable_vblank() and .disable_vblank() handlers and the plane .atomic_update() handler. We however need to handle the clock manually in mxsfb_irq_disable() as is calls .disable_vblank() manually and is used both at probe and remove time. The clock disabling is also moved to the last step of the mxsfb_crtc_atomic_disable() function, to prepare for enabling vblank handling. Signed-off-by:
-
Laurent Pinchart authored
The vblank event is armed in the plane .atomic_update(). This works fine as we have a single plane, and was the only option when the driver was using the drm_simple_kms_helper helper, but will break as soon as multiple planes are supported. Move it to CRTC .atomic_flush(). Signed-off-by:
-
Laurent Pinchart authored
The DRM simple display pipeline helper only supports a single plane. In order to prepare for support of the alpha plane on i.MX6SX and i.MX7, move away from the helper. No new feature is added. Signed-off-by:
-
Laurent Pinchart authored
The mxsfb_crtc.c file doesn't handle just the CRTC, but also the other KMS objects. Rename it accordingly. Signed-off-by:
-
Laurent Pinchart authored
A fair number of includes are not needed. Drop them, and add a couple of required includes that were included indirectly. Signed-off-by:
-
Laurent Pinchart authored
mxsfb_crtc.c defines several macros related to register addresses and bit, which duplicates macros from mxsfb_regs.h. Use the macros from mxsfb_regs.h instead and remove them. Signed-off-by:
-
Laurent Pinchart authored
The LCDC_CTRL register is located at address 0x0000. Some of the accesses to the register simply use the mxsfb->base address. Reference the LCDC_CTRL register explicitly instead to clarify the code. Signed-off-by:
-
Laurent Pinchart authored
The mxsfb_reset_block() function isn't special, pass it the mxsfb_drm_private pointer instead of a pointer to the base address. Signed-off-by:
-
Laurent Pinchart authored
Replace the convoluted way to set the format and bus width through difficult to read macros with more explicit ones. Also remove the outdated comment related to the limitations on bus width setting as it doesn't apply anymore (the bus width can be specified through the display_info bus format). Signed-off-by:
-
Laurent Pinchart authored
mxsfb_regs.h defines macros related to register bits. Some of them are not used and don't clearly map to any particular register, so their purpose isn't known. Remove them. Signed-off-by:
-
Laurent Pinchart authored
Using BIT() is preferred over manual shifts as it's more readable, handles the 1 << 31 case properly, and avoids other mistakes as shown by the DEBUG0_HSYNC and DEBUG0_VSYNC bits (that are currently unused). Use it. Signed-off-by:
-
Laurent Pinchart authored
Replace the manual connector implementation based on drm_panel with the drm_panel_bridge helper. This simplifies the mxsfb driver by removing connector-related code, and standardizing all pipeline control operations on bridges. A hack is needed to get hold of the connector, as that's our only source of bus flags and formats for now. As soon as the bridge API provides us with that information this can be fixed. Signed-off-by:
-
Laurent Pinchart authored
Commit 8e93f102 ("drm/mxsfb: Use drm_fbdev_generic_setup()") replaced fbdev handling with drm_fbdev_generic_setup() but left inclusion of the drm/drm_fb_cma_helper.h header. Remove it. Fixes: 8e93f102 ("drm/mxsfb: Use drm_fbdev_generic_setup()") Signed-off-by:
-
Christian König authored
We can't pipeline that during eviction because the memory needs to be available immediately. v2: fix how we cleanup the BOs resources Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Tested-by:
Alex Sierra <alex.sierra@amd.com> Link: https://patchwork.freedesktop.org/patch/379039/
-
Paul Menzel authored
The newly added hexint helper is more convenient for bitmasks. Before: $ more /sys/module/amdgpu/parameters/ppfeaturemask 4294950911 After: $ more /sys/module/amdgpu/parameters/ppfeaturemask 0xffffbfff Cc: amd-gfx@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by:Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by:
-
Paul Menzel authored
For bitmasks printing values in hex is more convenient. Prefix with `0x` to make it clear, that it’s a hex value, and pad it out. Using the helper for `amdgpu.ppfeaturemask`, it will look like below. Before: $ more /sys/module/amdgpu/parameters/ppfeaturemask 4294950911 After: $ more /sys/module/amdgpu/parameters/ppfeaturemask 0xffffbfff Cc: linux-kernel@vger.kernel.org Cc: amd-gfx@lists.freedesktop.org Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by:
-
Paul Menzel authored
The second and third arguments are aligned with tabs, so do the same for the fourth. Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
- 27 Jul, 2020 15 commits
-
-
Sam Ravnborg authored
Prepare the bridge driver for use in a chained setup. - Replacing direct use of drm_panel with drm_panel_bridge support. - Make the connector creation optional Note: the bridge panel will use the connector type from the panel. v3: - Fix wrong logic in connector creation (Laurent) v2: - Use panel_bridge for local variable name to align with other drivers - Fix that connector was created twice (Laurent) - Set bridge.type to DRM_MODE_CONNECTOR_LVDS. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
-
Sam Ravnborg authored
Add the get_edid() bridge operation to prepare for use as a chained bridge. Add helper function that is also used by the connector. v2: - Fix memory leak (Laurent) - Do not save a copy of edid, read it when needed Signed-off-by:
-
Sam Ravnborg authored
With the bridge operations implemented the last step to prepare this driver for a chained setup is the use of the bridge panel driver. The bridge panel driver is only used when a port@2 is present in the DT. So when the display driver requests a connector support both situations: - connector created by bridge panel driver - connector created by this driver And on top, support that the display driver creates the connector, which is the preferred setup. Note: the bridge panel will use the connector type from the panel. v3: - Fix wrong logic in connector creation (Laurent) v2: - Merge connector and drm_panel_bridge patches and fix so we do not create two connectors (Laurent) Signed-off-by: -
Sam Ravnborg authored
Prepare for chained bridge with the addition of get_edid support. v2: - Fixed handling of edid storage (Laurent) Signed-off-by:
-
Sam Ravnborg authored
Prepare the bridge driver for chained operation by adding support for the detect operation. v3: - Fix code to make it readable (Laurent) v2: - Do not announce detect operation if there is no hpd pin (Laurent) Signed-off-by:
-
Sam Ravnborg authored
Make the connector creation optional to enable usage of the megachips-stdpxxxx-ge-b850v3-fw bridge with the DRM bridge connector helper. v2: - Set bridge.type to DRM_MODE_CONNECTOR_DisplayPort Signed-off-by:
-
Sam Ravnborg authored
To prepare for a chained bridge setup add support for the get_edid bridge operation. There is no need for a copy of the edid - so drop the pointer to the copy. v2: - Fix so we do not leak memory (Laurent) Signed-off-by:
-
Sam Ravnborg authored
To prepare for use in a chained bridge setup enable the detect operation. Signed-off-by:
-
Sam Ravnborg authored
Fix so drm_device is read from the bridge. This is a preparation for the connector being optional. Signed-off-by:
-
Sam Ravnborg authored
Factor out connector creation to a small helper function. Signed-off-by:
-
Sam Ravnborg authored
Prepare the bridge driver for use in a chained setup by replacing direct use of drm_panel with drm_panel_bridge support. The connecter is now either created by the panel bridge or the display driver. So all code for connector creation in this driver is no longer relevant and thus dropped. The connector code had some special polling handling: connector.polled = DRM_CONNECTOR_POLL_HPD; drm_helper_hpd_irq_event(ps8622->bridge.dev); This code was most likely added to speed up detection of the connector. If really needed then this functionality belongs somewhere else. Note: the bridge panel will use the connector type from the panel. v2: - Fix to avoid creating connector twice (Laurent) - Drop all connector code - defer to bridge panel - Use panel_bridge for local variable to align with other drivers - Set bridge.type to DRM_MODE_CONNECTOR_LVDS; Signed-off-by: -
Sam Ravnborg authored
Prepare the tc358764 bridge driver for use in a chained setup by replacing direct use of drm_panel with drm_panel_bridge support. The bridge panel will use the connector type reported by the panel, where the connector for this driver hardcodes DRM_MODE_CONNECTOR_LVDS. The tc358764 did not add any additional info the the connector so the connector creation is passed to the bridge panel driver. v3: - Merge with patch to make connector creation optional to avoid creating two connectors (Laurent) - Pass connector creation to bridge panel, as this bridge driver did not add any extra info to the connector. - Set bridge.type to DRM_MODE_CONNECTOR_LVDS. v2: - Use PTR_ERR_OR_ZERO() (kbuild test robot) Signed-off-by: -
Sam Ravnborg authored
Drop drm_connector handling that is not needed: - drm_dev_register() in the display controller driver takes care of registering connectors. So the call to drm_connector_register() call is not needed in the bridge driver. - Use of drm_connector_unregister() is only required for drivers that explicit have called drm_dev_register. - The reference counting using drm_connector_put() is likewise not needed. Signed-off-by:
-
Sam Ravnborg authored
All panels shall report a connector type. panel-simple has a lot of panels with no connector_type, and for these fall back to DPI as the default. v2: - Rebased on top of validation of panel description Signed-off-by:
-
Sam Ravnborg authored
Warn if we detect a panel with incomplete/wrong description. This is inspired by a similar patch by Laurent that introduced checks for LVDS panels - this extends the checks to the remaining type of connectors. This is known to warn for some of the existing panels but added despite this as we need help from people using the panels to add the missing info. The checks are not complete but will catch the most common mistakes. The checks at the same time serve as documentation for the minimum required description for a panel. The checks uses dev_warn() as we know this will hit. WARN() was too noisy at the moment for anything else than LVDS. v3: - %d => %u for bpc (Laurent) v2: - Use dev_warn (Laurent) - Check for empty bus_flags Signed-off-by:
-
- 26 Jul, 2020 4 commits
-
-
Sam Ravnborg authored
The boe,hv070wsa-100 panel is a LVDS panel. Fix connector type to reflect this. With this change users of this panel do not have to specify the connector type. v4: - Add .bpc = 4 (Laurent) v3: - Drop PIXDATA bus_flag, not relevant v2: - Add .bus_format (Laurent) - Add .bus_flags Signed-off-by:
-
Vinod Koul authored
Lontium Lt9611 is a DSI to HDMI bridge which supports two DSI ports and I2S port as an input and HDMI port as output Co-developed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> # fix lt9611_bridge_mode_valid Link: https://patchwork.freedesktop.org/patch/msgid/20200723163442.1280414-4-vkoul@kernel.org
-
Vinod Koul authored
Lontium LT9611 is a DSI to HDMI bridge which supports 2 DSI ports and I2S port as input and one HDMI port as output Reviewed-by:
Rob Herring <robh@kernel.org> Tested-by:
-
Vinod Koul authored
Add prefix for Lontium Semiconductor Corporation Acked-by:
-
- 24 Jul, 2020 1 commit
-
-
Ville Syrjälä authored
Add a TODO for plumbing drm_atomic_state all over to ease the hurdles of accessing additional object states. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #irc Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200717135439.5996-1-ville.syrjala@linux.intel.com
-
