- 24 Mar, 2018 40 commits
-
-
Robert Walker authored
[ Upstream commit 11595db8 ] The CoreSight TPIU should be disabled when tracing to other sinks to allow them to operate at full bandwidth. This patch fixes tpiu_disable_hw() to correctly disable the TPIU by configuring the TPIU to stop on flush, initiating a manual flush, waiting for the flush to complete and then waits for the TPIU to indicate it has stopped. Signed-off-by:
Robert Walker <robert.walker@arm.com> Tested-by:
Mike Leach <mike.leach@linaro.org> Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Sahara authored
[ Upstream commit 2b022ab7 ] In case that CONFIG_SLUB_DEBUG is on and pty is used, races between release_one_tty and flush_to_ldisc work threads may happen and lead to use-after-free condition on tty->link->port. Because SLUB_DEBUG is turned on, freed tty->link->port is filled with POISON_FREE value. So far without SLUB_DEBUG, port was filled with zero and flush_to_ldisc could return without a problem by checking if tty is NULL. CPU 0 CPU 1 ----- ----- release_tty pty_write cancel_work_sync(tty) to = tty->link tty_kref_put(tty->link) tty_schedule_flip(to->port) << workqueue >> ... release_one_tty ... pty_cleanup ... kfree(tty->link->port) << workqueue >> flush_to_ldisc tty = READ_ONCE(port->itty) tty is 0x6b6b6b6b6b6b6b6b !!PANIC!! access tty->ldisc Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b93 pgd = ffffffc0eb1c3000 [6b6b6b6b6b6b6b93] *pgd=0000000000000000, *pud=0000000000000000 ------------[ cut here ]------------ Kernel BUG at ffffff800851154c [verbose debug info unavailable] Internal error: Oops - BUG: 96000004 [#1] PREEMPT SMP CPU: 3 PID: 265 Comm: kworker/u8:9 Tainted: G W 3.18.31-g0a58eeb #1 Hardware name: Qualcomm Technologies, Inc. MSM 8996pro v1.1 + PMI8996 Carbide (DT) Workqueue: events_unbound flush_to_ldisc task: ffffffc0ed610ec0 ti: ffffffc0ed624000 task.ti: ffffffc0ed624000 PC is at ldsem_down_read_trylock+0x0/0x4c LR is at tty_ldisc_ref+0x24/0x4c pc : [<ffffff800851154c>] lr : [<ffffff800850f6c0>] pstate: 80400145 sp : ffffffc0ed627cd0 x29: ffffffc0ed627cd0 x28: 0000000000000000 x27: ffffff8009e05000 x26: ffffffc0d382cfa0 x25: 0000000000000000 x24: ffffff800a012f08 x23: 0000000000000000 x22: ffffffc0703fbc88 x21: 6b6b6b6b6b6b6b6b x20: 6b6b6b6b6b6b6b93 x19: 0000000000000000 x18: 0000000000000001 x17: 00e80000f80d6f53 x16: 0000000000000001 x15: 0000007f7d826fff x14: 00000000000000a0 x13: 0000000000000000 x12: 0000000000000109 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffffc0ed624000 x8 : ffffffc0ed611580 x7 : 0000000000000000 x6 : ffffff800a42e000 x5 : 00000000000003fc x4 : 0000000003bd1201 x3 : 0000000000000001 x2 : 0000000000000001 x1 : ffffff800851004c x0 : 6b6b6b6b6b6b6b93 Signed-off-by:
Sahara <keun-o.park@darkmatter.ae> Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit b7ea6b28 ] Check the status of the DMM engine after it is reported that the transaction was completed as in rare cases the engine might not reached a working state. The wait_status() will print information in case the DMM is not reached the expected state and the dmm_txn_commit() will return with an error code to make sure that we are not continuing with a broken setup. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Bjorn Helgaas authored
[ Upstream commit c8208411 ] Set the resource type when we reserve VGA-related I/O port resources. The resource code doesn't actually look at the type, so it inserts resources without a type in the tree correctly even without this change. But if we ever print a resource without a type, it looks like this: vga+ [??? 0x000003c0-0x000003df flags 0x0] Setting the type means it will be printed correctly as: vga+ [io 0x000003c0-0x000003df] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Artemy Kovalyov authored
[ Upstream commit edf1a84f ] In ib_umem structure npages holds original number of sg entries, while nmap is number of DMA blocks returned by dma_map_sg. Fixes: c5d76f13 ('IB/core: Add umem function to read data from user-space') Signed-off-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Parav Pandit authored
[ Upstream commit 7baaa49a ] The code was using the src size when formatting the dst. They are almost certainly the same value but it reads wrong. Fixes: ce117ffa ("RDMA/cma: Export AF_IB statistics") Signed-off-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
-
Erez Shitrit authored
[ Upstream commit 43900089 ] The ipoib path database is organized around DGIDs from the LLADDR, but the SA is free to return a different GID when asked for path. This causes a bug because the SA's modified DGID is copied into the database key, even though it is no longer the correct lookup key, causing a memory leak and other malfunctions. Ensure the database key does not change after the SA query completes. Demonstration of the bug is as follows ipoib wants to send to GID fe80:0000:0000:0000:0002:c903:00ef:5ee2, it creates new record in the DB with that gid as a key, and issues a new request to the SM. Now, the SM from some reason returns path-record with other SGID (for example, 2001:0000:0000:0000:0002:c903:00ef:5ee2 that contains the local subnet prefix) now ipoib will overwrite the current entry with the new one, and if new request to the original GID arrives ipoib will not find it in the DB (was overwritten) and will create new record that in its turn will also be overwritten by the response from the SM, and so on till the driver eats all the device memory. Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Signed-off-by:
-
Daniel Drake authored
[ Upstream commit de8dcc3d ] The Weibu F3C MiniPC has an onboard AP6255 module, presenting two SDIO functions on a single MMC host (Bluetooth/btsdio and WiFi/brcmfmac), and the mmc layer correctly detects this as non-removable. After suspend/resume, the wifi and bluetooth interfaces disappear and do not get probed again. The conditions here are: 1. During suspend, we reach mmc_pm_notify() 2. mmc_pm_notify() calls mmc_sdio_pre_suspend() to see if we can suspend the SDIO host. However, mmc_sdio_pre_suspend() returns -ENOSYS because btsdio_driver does not have a suspend method. 3. mmc_pm_notify() proceeds to remove the card 4. Upon resume, mmc_rescan() does nothing with this host, because of the rescan_entered check which aims to only scan a non-removable device a single time (i.e. during boot). Fix the loss of functionality by detecting that we are unable to suspend a non-removable host, so avoid the forced removal in that case. The comment above this function already indicates that this code was only intended for removable devices. Signed-off-by:
Daniel Drake <drake@endlessm.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Shawn Nematbakhsh authored
[ Upstream commit d48b8c58 ] pkt_xfer should be used for protocol v3, and cmd_xfer otherwise. We had one instance of these functions correct, but not the second, fall-back case. We use the fall-back only when the first command returns an IN_PROGRESS status, which is only used on some EC firmwares where we don't want to constantly poll the bus, but instead back off and sleep/retry for a little while. Fixes: 2c7589af ("mfd: cros_ec: add proto v3 skeleton") Signed-off-by:
Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by:
Brian Norris <briannorris@chromium.org> Reviewed-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Benson Leung <bleung@chromium.org> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 50a0d71a ] As gcc-8 reports, we zero out the wrong byte: drivers/platform/chrome/cros_ec_sysfs.c: In function 'show_ec_version': drivers/platform/chrome/cros_ec_sysfs.c:190:12: error: array subscript 4294967295 is above array bounds of 'uint8_t[]' [-Werror=array-bounds] This changes the code back to what it did before changing to a zero-length array structure. Fixes: a8411784 ("mfd: cros_ec: Use a zero-length array for command data") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Ron Economos authored
[ Upstream commit 380a6c86 ] On faster CPUs a delay is required after the resume command and the restart command. Without the delay, the restart command often returns -EREMOTEIO and the Si2168 does not restart. Note that this patch fixes the same issue as https://patchwork.linuxtv.org/patch/44304/, but I believe my udelay() fix addresses the actual problem. Signed-off-by:
Ron Economos <w6rz@comcast.net> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 45392ff6 ] This is odd to call 'pci_disable_device()' in an error path before a coresponding successful 'pci_enable_device()'. Return directly instead. Fixes: 77e0be12 ("V4L/DVB (4176): Bug-fix: Fix memory overflow") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Tsang-Shian Lin authored
[ Upstream commit b7573a0a ] Reset the driver current tx read/write index to zero when inactiveps nic out of sync with HW state. Wrong driver tx read/write index will cause Tx fail. Signed-off-by:
Tsang-Shian Lin <thlin@realtek.com> Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 302d6424 ] With gcc-4.1.2: drivers/infiniband/core/iwpm_util.c: In function ‘iwpm_send_mapinfo’: drivers/infiniband/core/iwpm_util.c:647: warning: ‘ret’ may be used uninitialized in this function Indeed, if nl_client is not found in any of the scanned has buckets, ret will be used uninitialized. Preinitialize ret to -EINVAL to fix this. Fixes: 30dc5e63 ("RDMA/core: Add support for iWARP Port Mapper user space service") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by:
-
Prakash Kamliya authored
[ Upstream commit 62e3a3e3 ] get_pages doesn't keep a reference of the pages allocated when it fails later in the code path. This can lead to a memory leak. Keep reference of the allocated pages so that it can be freed when msm_gem_free_object gets called later during cleanup. Signed-off-by:
Prakash Kamliya <pkamliya@codeaurora.org> Signed-off-by:
Sharat Masetty <smasetty@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit baed3c4b ] _channel_ is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Fix this by moving the pointer dereference after _channel_ has been null checked. This issue was detected with the help of Coccinelle. Fixes: c5f5d0f9 ("[media] c8sectpfe: STiH407/10 Linux DVB demux support") Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by:
Patrice Chotard <patrice.chotard@st.com> Signed-off-by:
-
Loic Poulain authored
[ Upstream commit ba8f3597 ] Assuming that the original code idea was to enable in-band sleeping only if the setup_rome method returns succes and run in 'standard' mode otherwise, we should not return setup_rome return value which makes qca_setup fail if no rampatch/nvm file found. This fixes BT issue on the dragonboard-820C p4 which includes the following QCA controller: hci0: Product:0x00000008 hci0: Patch :0x00000111 hci0: ROM :0x00000302 hci0: SOC :0x00000044 Since there is no rampatch for this controller revision, just make it work as is. Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Kim Phillips authored
[ Upstream commit 805b151a ] __kmod_path__parse() uses is_supported_compression() to determine and parse out compressed module file extensions. On systems without zlib, this test fails and __kmod_path__parse() continues to strcmp "ko" with "gz". Don't do this on those systems. Signed-off-by:
Kim Phillips <kim.phillips@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 3c8a67f5 ("perf tools: Add kmod_path__parse function") Link: http://lkml.kernel.org/r/20170503131402.c66e314460026c80cd787b34@arm.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Moritz Fischer authored
[ Upstream commit 538c08f4 ] The WDIOC_SETOPTIONS case in the watchdog ioctl would alwayss falls through to the -EINVAL case. This is wrong since thew watchdog does actually get stopped or started correctly. Fixes: 920f91e5 ("drivers/rtc/rtc-ds1374.c: add watchdog support") Signed-off-by:
Moritz Fischer <mdf@kernel.org> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Moritz Fischer authored
[ Upstream commit 453d0744 ] The issue is that the internal counter that triggers the watchdog reset is actually running at 4096 Hz instead of 1Hz, therefore the value given by userland (in sec) needs to be multiplied by 4096 to get the correct behavior. Fixes: 920f91e5 ("drivers/rtc/rtc-ds1374.c: add watchdog support") Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 564277ec ] January is month 1. There is no zero-th month. If someone passes a zero month then it means we read from one space before the start of the total_days_of_prev_months[] array. We may as well also be strict about days as well. Fixes: 1bd5bbcb ("[CIFS] Legacy time handling for Win9x and OS/2 part 1") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Timmy Li authored
[ Upstream commit 412b65d1 ] hns_get_sset_count() returns HNS_NET_STATS_CNT and the data space allocated is not enough for ethtool_get_strings(), which will cause random memory corruption. When SLAB and DEBUG_SLAB are both enabled, memory corruptions like the the following can be observed without this patch: [ 43.115200] Slab corruption (Not tainted): Acpi-ParseExt start=ffff801fb0b69030, len=80 [ 43.115206] Redzone: 0x9f911029d006462/0x5f78745f31657070. [ 43.115208] Last user: [<5f7272655f746b70>](0x5f7272655f746b70) [ 43.115214] 010: 70 70 65 31 5f 74 78 5f 70 6b 74 00 6b 6b 6b 6b ppe1_tx_pkt.kkkk [ 43.115217] 030: 70 70 65 31 5f 74 78 5f 70 6b 74 5f 6f 6b 00 6b ppe1_tx_pkt_ok.k [ 43.115218] Next obj: start=ffff801fb0b69098, len=80 [ 43.115220] Redzone: 0x706d655f6f666966/0x9f911029d74e35b. [ 43.115229] Last user: [<ffff0000084b11b0>](acpi_os_release_object+0x28/0x38) [ 43.115231] 000: 74 79 00 6b 6b 6b 6b 6b 70 70 65 31 5f 74 78 5f ty.kkkkkppe1_tx_ [ 43.115232] 010: 70 6b 74 5f 65 72 72 5f 63 73 75 6d 5f 66 61 69 pkt_err_csum_fai Signed-off-by:
Timmy Li <lixiaoping3@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Alexey Khoroshilov authored
[ Upstream commit dc85e9a8 ] If fbmem iomemory mapping failed, sm501fb_start() breaks off initialization, deallocates resources, but returns zero. As a result, double deallocation can happen in sm501fb_stop(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Maksim Salau authored
[ Upstream commit 45f580c4 ] Allocate buffers on HEAP instead of STACK for local array that is to be sent using usb_control_msg(). Signed-off-by:
Maksim Salau <maksim.salau@gmail.com> Cc: Bernie Thompson <bernie@plugable.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Dmitry Monakhov authored
[ Upstream commit f11b55d1 ] If we failed to read data from backing file (probably because some one truncate file under us), we must zerofill cmd's data, otherwise it will be returned as is. Most likely cmd's data are unitialized pages from page cache. This result in information leak. (Change BUG_ON into -EINVAL se_cmd failure - nab) testcase: https://github.com/dmonakhov/xfstests/commit/e11a1b7b907ca67b1be51a1594025600767366d5Signed-off-by:
Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Sergei Trofimovich authored
[ Upstream commit a25fb850 ] Starting from gcc-5.4+ gcc generates MLX instructions in more cases to refer local symbols: https://gcc.gnu.org/PR60465 That caused ia64 module loader to choke on such instructions: fuse: invalid slot number 1 for IMM64 The Linux kernel used to handle only case where relocation pointed to slot=2 instruction in the bundle. That limitation was fixed in linux by commit 9c184a07 ("[IA64] Fix 2.6 kernel for the new ia64 assembler") See http://sources.redhat.com/bugzilla/show_bug.cgi?id=1433 This change lifts the slot=2 restriction from the kernel module loader. Tested on 'fuse' and 'btrfs' kernel modules. Cc: Markus Elfring <elfring@users.sourceforge.net> Cc: H J Lu <hjl.tools@gmail.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Bug: https://bugs.gentoo.org/601014Tested-by:
Émeric MASCHINO <emeric.maschino@gmail.com> Signed-off-by:
Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Shaohua Li authored
[ Upstream commit b506335e ] Commit 6f287ca6(md/raid10: reset the 'first' at the end of loop) ignores a case in reshape, the first rdev could be a spare disk, which shouldn't be accounted as the first disk since it doesn't include the offset info. Fix: 6f287ca6(md/raid10: reset the 'first' at the end of loop) Cc: Guoqing Jiang <gqjiang@suse.com> Cc: NeilBrown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Sebastian Reichel authored
[ Upstream commit 3071e9dd ] The interrupt should be requested for the platform device and not for the input device. Fixes: 7f9ce649 ("Input: twl4030-pwrbutton - simplify driver using devm_*") Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Michael Trimarchi authored
[ Upstream commit 633e8799 ] This changed is needed to avoid locking problem during boot as shown: <5>[ 8.824096] Registering SWP/SWPB emulation handler <6>[ 8.977294] clock: disabling unused clocks to save power <3>[ 9.108154] BUG: sleeping function called from invalid context at kernel_albert/kernel/mutex.c:269 <3>[ 9.122894] in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper/0 <4>[ 9.130249] 3 locks held by swapper/0/1: <4>[ 9.134613] #0: (&__lockdep_no_validate__){......}, at: [<c0342430>] __driver_attach+0x58/0xa8 <4>[ 9.144500] #1: (&__lockdep_no_validate__){......}, at: [<c0342440>] __driver_attach+0x68/0xa8 <4>[ 9.154357] #2: (&polling_timer){......}, at: [<c0053770>] run_timer_softirq+0x108/0x3ec <4>[ 9.163726] Backtrace: <4>[ 9.166473] [<c001269c>] (dump_backtrace+0x0/0x114) from [<c067e5f0>] (dump_stack+0x20/0x24) <4>[ 9.175811] r6:00203230 r5:0000010d r4:d782e000 r3:60000113 <4>[ 9.182250] [<c067e5d0>] (dump_stack+0x0/0x24) from [<c007441c>] (__might_sleep+0x10c/0x128) <4>[ 9.191650] [<c0074310>] (__might_sleep+0x0/0x128) from [<c0688f60>] (mutex_lock_nested+0x34/0x36c) <4>[ 9.201660] r5:c02d5350 r4:d79a0c64 <4>[ 9.205688] [<c0688f2c>] (mutex_lock_nested+0x0/0x36c) from [<c02d5350>] (regulator_set_current_limit+0x30/0x118) <4>[ 9.217071] [<c02d5320>] (regulator_set_current_limit+0x0/0x118) from [<c0435ce0>] (update_charger+0x84/0xc4) <4>[ 9.228027] r7:d782fb20 r6:00000101 r5:c1767e94 r4:00000000 <4>[ 9.234436] [<c0435c5c>] (update_charger+0x0/0xc4) from [<c0435d40>] (psy_changed+0x20/0x48) <4>[ 9.243804] r5:d782e000 r4:c1767e94 <4>[ 9.247802] [<c0435d20>] (psy_changed+0x0/0x48) from [<c0435dec>] (polling_timer_func+0x84/0xb8) <4>[ 9.257537] r4:c1767e94 r3:00000002 <4>[ 9.261566] [<c0435d68>] (polling_timer_func+0x0/0xb8) from [<c00537e4>] (run_timer_softirq+0x17c/0x3ec) <4>[ 9.272033] r4:c1767eb0 r3:00000000 <4>[ 9.276062] [<c0053668>] (run_timer_softirq+0x0/0x3ec) from [<c004b000>] (__do_softirq+0xf0/0x298) <4>[ 9.286010] [<c004af10>] (__do_softirq+0x0/0x298) from [<c004b650>] (irq_exit+0x98/0xa0) <4>[ 9.295013] [<c004b5b8>] (irq_exit+0x0/0xa0) from [<c000edbc>] (handle_IRQ+0x60/0xc0) <4>[ 9.303680] r4:c1194e98 r3:c00bc778 <4>[ 9.307708] [<c000ed5c>] (handle_IRQ+0x0/0xc0) from [<c0008504>] (gic_handle_irq+0x34/0x68) <4>[ 9.316955] r8:000ac383 r7:d782fc3c r6:d782fc08 r5:c11936c4 r4:e0802100 <4>[ 9.324310] r3:c026ba48 <4>[ 9.327301] [<c00084d0>] (gic_handle_irq+0x0/0x68) from [<c068c2c0>] (__irq_svc+0x40/0x74) <4>[ 9.336456] Exception stack(0xd782fc08 to 0xd782fc50) <4>[ 9.342041] fc00: d6e30e6c ac383627 00000000 ac383417 ea19c000 ea200000 <4>[ 9.351104] fc20: beffffff 00000667 000ac383 d6e30670 d6e3066c d782fc94 d782fbe8 d782fc50 <4>[ 9.360168] fc40: c026ba48 c001d1f0 00000113 ffffffff Fixes: b2998049 ("[BATTERY] pda_power platform driver") Signed-off-by:
Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by:
Anthony Brandon <anthony@amarulasolutions.com> Signed-off-by:
-
Scott Wood authored
[ Upstream commit 9b70de6d ] The bnx2x driver is not providing proper alignment on the receive buffers it passes to build_skb(), causing skb_shared_info to be misaligned. skb_shared_info contains an atomic, and while PPC normally supports unaligned accesses, it does not support unaligned atomics. Aligning the size of rx buffers will ensure that page_frag_alloc() returns aligned addresses. This can be reproduced on PPC by setting the network MTU to 1450 (or other non-multiple-of-4) and then generating sufficient inbound network traffic (one or two large "wget"s usually does it), producing the following oops: Unable to handle kernel paging request for unaligned access at address 0xc00000ffc43af656 Faulting instruction address: 0xc00000000080ef8c Oops: Kernel access of bad area, sig: 7 [#1] SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: vmx_crypto powernv_rng rng_core powernv_op_panel leds_powernv led_class nfsd ip_tables x_tables autofs4 xfs lpfc bnx2x mdio libcrc32c crc_t10dif crct10dif_generic crct10dif_common CPU: 104 PID: 0 Comm: swapper/104 Not tainted 4.11.0-rc8-00088-g4c761daf #2 task: c00000ffd4892400 task.stack: c00000ffd4920000 NIP: c00000000080ef8c LR: c00000000080eee8 CTR: c0000000001f8320 REGS: c00000ffffc33710 TRAP: 0600 Not tainted (4.11.0-rc8-00088-g4c761daf) MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 24082042 XER: 00000000 CFAR: c00000000080eea0 DAR: c00000ffc43af656 DSISR: 00000000 SOFTE: 1 GPR00: c000000000907f64 c00000ffffc33990 c000000000dd3b00 c00000ffcaf22100 GPR04: c00000ffcaf22e00 0000000000000000 0000000000000000 0000000000000000 GPR08: 0000000000b80008 c00000ffc43af636 c00000ffc43af656 0000000000000000 GPR12: c0000000001f6f00 c00000000fe1a000 000000000000049f 000000000000c51f GPR16: 00000000ffffef33 0000000000000000 0000000000008a43 0000000000000001 GPR20: c00000ffc58a90c0 0000000000000000 000000000000dd86 0000000000000000 GPR24: c000007fd0ed10c0 00000000ffffffff 0000000000000158 000000000000014a GPR28: c00000ffc43af010 c00000ffc9144000 c00000ffcaf22e00 c00000ffcaf22100 NIP [c00000000080ef8c] __skb_clone+0xdc/0x140 LR [c00000000080eee8] __skb_clone+0x38/0x140 Call Trace: [c00000ffffc33990] [c00000000080fb74] skb_clone+0x74/0x110 (unreliable) [c00000ffffc339c0] [c000000000907f64] packet_rcv+0x144/0x510 [c00000ffffc33a40] [c000000000827b64] __netif_receive_skb_core+0x5b4/0xd80 [c00000ffffc33b00] [c00000000082b2bc] netif_receive_skb_internal+0x2c/0xc0 [c00000ffffc33b40] [c00000000082c49c] napi_gro_receive+0x11c/0x260 [c00000ffffc33b80] [d000000066483d68] bnx2x_poll+0xcf8/0x17b0 [bnx2x] [c00000ffffc33d00] [c00000000082babc] net_rx_action+0x31c/0x480 [c00000ffffc33e10] [c0000000000d5a44] __do_softirq+0x164/0x3d0 [c00000ffffc33f00] [c0000000000d60a8] irq_exit+0x108/0x120 [c00000ffffc33f20] [c000000000015b98] __do_irq+0x98/0x200 [c00000ffffc33f90] [c000000000027f14] call_do_irq+0x14/0x24 [c00000ffd4923a90] [c000000000015d94] do_IRQ+0x94/0x110 [c00000ffd4923ae0] [c000000000008d90] hardware_interrupt_common+0x150/0x160 Signed-off-by:
-
Mario Kleiner authored
[ Upstream commit 60b95d70 ] So far we only allowed for 1 retry and just failed the query - and thereby high precision vblank timestamping - if we did not get a reasonable result, as such a failure wasn't considered all too horrible. There are a few NVidia gpu models out there which may need a bit more than 1 retry to get a successful query result under some conditions. Since Linux 4.4 the update code for vblank counter and timestamp in drm_update_vblank_count() changed so that the implementation assumes that high precision vblank timestamping of a kms driver either consistently succeeds or consistently fails for a given video mode and encoder/connector combo. Iow. switching from success to fail or vice versa on a modeset or connector change is ok, but spurious temporary failure for a given setup can confuse the core code and potentially cause bad miscounting of vblanks and confusion or hangs in userspace clients which rely on vblank stuff, e.g., desktop compositors. Therefore change the max retry count to a larger number - more than any gpu so far is known to need to succeed, but still low enough so that these queries which do also happen in vblank interrupt are still fast enough to be not disastrously long if something would go badly wrong with them. As such sporadic retries only happen seldom even on affected gpu's, this could mean a vblank irq could take a few dozen microseconds longer every few hours of uptime -- better than a desktop compositor randomly hanging every couple of hours or days of uptime in a hard to reproduce manner. Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 2bde7c32 ] The power table addresses should be contiguous, but there was a hole where 0x34 was missing. On most devices this is not a problem as addresses above 0x34 are used for the BUC# convertors which are not used in the DSDTs I've access to but after the BUC# convertors there is a field named GPI1 in the DSTDs, which does get used in some cases and ended up turning BUC6 on and off due to the wrong addresses, resulting in turning the entire device off (or causing it to reboot). Removing the hole in the addresses fixes this, fixing one of my Bay Trail tablets turning off while booting the mainline kernel. While at it add comments with the field names used in the DSDTs to make it easier to compare the register and bits used at each address with the datasheet. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Robert Lippert authored
[ Upstream commit 2c1175c2 ] Commit c49c0976 ("ipmi: Don't call receive handler in the panic context") means that the panic_recv_free is not called during a panic and the atomic count does not drop to 0. Fix this by only expecting one decrement of the atomic variable which comes from panic_smi_free. Signed-off-by:
Robert Lippert <rlippert@google.com> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Kishon Vijay Abraham I authored
[ Upstream commit 2c949ce3 ] The PCIe programming sequence in TRM suggests CLKSTCTRL of PCIe should be set to SW_WKUP. There are no issues when CLKSTCTRL is set to HW_AUTO in RC mode. However in EP mode, the host system is not able to access the MEMSPACE and setting the CLKSTCTRL to SW_WKUP fixes it. Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
yangbo lu authored
[ Upstream commit a627f025 ] The ls1046a datasheet specified that the max SD clock frequency for eSDHC SDR104/HS200 was 167MHz, and the ls1012a datasheet specified it's 125MHz for ls1012a. So this patch is to add the limitation. Signed-off-by:
Yangbo Lu <yangbo.lu@nxp.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Pan Bian authored
[ Upstream commit 9e966527 ] Function dev_alloc_skb() will return a NULL pointer if there is no enough memory. However, in function WILC_WFI_mon_xmit(), its return value is used without validation. This may result in a bad memory access bug. This patch fixes the bug. Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
-
Sameer Wadgaonkar authored
[ Upstream commit 3c2bf0bd ] The root issue is that we are not allowed to have items on the stack being passed to "DMA" like operations. In this case we have a vmcall and an inline completion of scsi command. This patch fixes the issue by moving the variables on stack in do_scsi_nolinuxstat() to heap memory. Signed-off-by:
Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com> Signed-off-by:
David Kershner <david.kershner@unisys.com> Signed-off-by:
-
Ming Lei authored
[ Upstream commit a4e84aae ] mtip32xx supposes that 'request_idx' passed to .init_request() is tag of the request, and use that as request's tag to initialize command header. After MQ IO scheduler is in, request tag assigned isn't same with the request index anymore, so cause strange hardware failure on mtip32xx, even whole system panic is triggered. This patch fixes the issue by initializing command header via request's real tag. Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Keerthy authored
[ Upstream commit 85fdaf8e ] POWERHOLD signal has higher priority over the DEV_ON bit. So power off will not happen if the POWERHOLD is held high. Hence reset the MUX to GPIO_7 mode to release the POWERHOLD and the DEV_ON bit to take effect to power off the PMIC. PMIC Power off happens in dire situations like thermal shutdown so irrespective of the POWERHOLD setting go ahead and turn off the powerhold. Currently poweroff is broken on boards that have powerhold enabled. This fixes poweroff on those boards. Signed-off-by:
Keerthy <j-keerthy@ti.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Emmanuel Grumbach authored
[ Upstream commit cf147085 ] ieee80211_frame_acked is called when a frame is acked by the peer. In case this is a management frame, we check if this an SMPS frame, in which case we can update our antenna configuration. When we parse the management frame we look at the category in case it is an action frame. That byte sits after the IV in case the frame was encrypted. This means that if the frame was encrypted, we basically look at the IV instead of looking at the category. It is then theorically possible that we think that an SMPS action frame was acked where really we had another frame that was encrypted. Since the only management frame whose ack needs to be tracked is the SMPS action frame, and that frame is not a robust management frame, it will never be encrypted. The easiest way to fix this problem is then to not look at frames that were encrypted. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
