There is a misconfiguration in the bios of the gpio pin used for the
interrupt in the T490s. When interrupts are enabled in the tpm_tis
driver code this results in an interrupt storm. This was initially
reported when we attempted to enable the interrupt code in the tpm_tis
driver, which previously wasn't setting a flag to enable it. Due to
the reports of the interrupt storm that code was reverted and we went back
to polling instead of using interrupts. Now that we know the T490s problem
is a firmware issue, add code to check if the system is a T490s and
disable interrupts if that is the case. This will allow us to enable
interrupts for everyone else. If the user has a fixed bios they can
force the enabling of interrupts with tpm_tis.interrupts=1 on the
kernel command line.

Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Merge tag 'linux-kselftest-kunit-fixes-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kunit fixes from Shuah Khan:
 "Several kunit_tool and documentation fixes"

* tag 'linux-kselftest-kunit-fixes-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: tools: fix kunit_tool tests for parsing test plans
  Documentation: kunit: Update Kconfig parts for KUNIT's module support
  kunit: test: fix remaining kernel-doc warnings
  kunit: Don't fail test suites if one of them is empty
  kunit: Fix kunit.py --raw_output option

Pull tracing fixes from Steven Rostedt:

 - Fix off-by-one error in retrieving the context buffer for
   trace_printk()

 - Fix off-by-one error in stack nesting limit

 - Fix recursion to not make all NMI code false positive as recursing

 - Stop losing events in function tracing when transitioning between irq
   context

 - Stop losing events in ring buffer when transitioning between irq
   context

 - Fix return code of error pointer in parse_synth_field() to prevent
   NULL pointer dereference.

 - Fix false positive of NMI recursion in kprobe event handling

* tag 'trace-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  kprobes: Tell lockdep about kprobe nesting
  tracing: Make -ENOMEM the default error for parse_synth_field()
  ring-buffer: Fix recursion protection transitions between interrupt context
  tracing: Fix the checking of stackidx in __ftrace_trace_stack
  ftrace: Handle tracing when switching between context
  ftrace: Fix recursion check for NMI test
  tracing: Fix out of bounds write in get_trace_buf

Pull hyperv fixes from Wei Liu:

 - clarify a comment (Michael Kelley)

 - change a pr_warn() to pr_info() (Olaf Hering)

* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  x86/hyperv: Clarify comment on x2apic mode
  hv_balloon: disable warning when floor reached

Pull rdma fixes from Jason Gunthorpe:
 "A few more merge window regressions that didn't make rc1:

   - New validation in the DMA layer triggers wrong use of the DMA layer
     in rxe, siw and rdmavt

   - Accidental change of a hypervisor facing ABI when widening the port
     speed u8 to u16 in vmw_pvrdma

   - Memory leak on error unwind in SRP target"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/srpt: Fix typo in srpt_unregister_mad_agent docstring
  RDMA/vmw_pvrdma: Fix the active_speed and phys_state value
  IB/srpt: Fix memory leak in srpt_add_one
  RDMA: Fix software RDMA drivers for dma mapping error

Pull spi fixes from Mark Brown:
 "A small collection of driver specific fixes that have come in since
  the merge window, nothing too major here but all good to have"

* tag 'spi-fix-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: fsl-dspi: fix wrong pointer in suspend/resume
  spi: bcm2835: fix gpio cs level inversion
  spi: imx: fix runtime pm support for !CONFIG_PM

Merge tag 'regulator-fix-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "An addition to MAINTAINERS plus a fix for a nasty bootstrapping
  problem which caused problems when we need to read the voltage of a
  regulator that is not yet available during initialization, we were not
  correctly distinguishing between this case and the case where a
  regulator is put into a bypass mode"

* tag 'regulator-fix-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: defer probe when trying to get voltage from unresolved supply
  MAINTAINERS: Add entry for Qualcomm IPQ4019 VQMMC regulator

Pull power management fixes from Rafael Wysocki:
 "These fix the device links support in runtime PM, correct mistakes in
  the cpuidle documentation, fix the handling of policy limits changes
  in the schedutil cpufreq governor, fix assorted issues in the OPP
  (operating performance points) framework and make one janitorial
  change.

  Specifics:

   - Unify the handling of managed and stateless device links in the
     runtime PM framework and prevent runtime PM references to devices
     from being leaked after device link removal (Rafael Wysocki).

   - Fix two mistakes in the cpuidle documentation (Julia Lawall).

   - Prevent the schedutil cpufreq governor from missing policy limits
     updates in some cases (Viresh Kumar).

   - Prevent static OPPs from being dropped by mistake (Viresh Kumar).

   - Prevent helper function in the OPP framework from returning
     prematurely (Viresh Kumar).

   - Prevent opp_table_lock from being held too long during removal of
     OPP tables with no more active references (Viresh Kumar).

   - Drop redundant semicolon from the Intel RAPL power capping driver
     (Tom Rix)"

* tag 'pm-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: runtime: Resume the device earlier in __device_release_driver()
  PM: runtime: Drop pm_runtime_clean_up_links()
  PM: runtime: Drop runtime PM references to supplier on link removal
  powercap/intel_rapl: remove unneeded semicolon
  Documentation: PM: cpuidle: correct path name
  Documentation: PM: cpuidle: correct typo
  cpufreq: schedutil: Don't skip freq update if need_freq_update is set
  opp: Reduce the size of critical section in _opp_table_kref_release()
  opp: Fix early exit from dev_pm_opp_register_set_opp_helper()
  opp: Don't always remove static OPPs in _of_add_opp_table_v1()

Pull highmem initialization fix from Mike Rapoport:
 "Fix highmem initialization on arm and xtensa

  Recent refactoring of memblock iterators has broken initialization of
  highmem on arm and xtensa because it changed the way beginning and end
  of memory regions are rounded to PFNs. This fix restores the original
  behaviour"

* tag 'fixes-2020-11-05' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  ARM, xtensa: highmem: avoid clobbering non-page aligned memory reservations

Pull gfs2 fixes from Andreas Gruenbacher:
 "Various gfs2 fixes"

* tag 'gfs2-v5.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Wake up when sd_glock_disposal becomes zero
  gfs2: Don't call cancel_delayed_work_sync from within delete work function
  gfs2: check for live vs. read-only file system in gfs2_fitrim
  gfs2: don't initialize statfs_change inodes in spectator mode
  gfs2: Split up gfs2_meta_sync into inode and rgrp versions
  gfs2: init_journal's undo directive should also undo the statfs inodes
  gfs2: Add missing truncate_inode_pages_final for sd_aspace
  gfs2: Free rd_bits later in gfs2_clear_rgrpd to fix use-after-free

Pull PCI fixes from Bjorn Helgaas:

 - Fix ACS regression that broke device pass-through (Rajat Jain)

 - Revert DesignWare ATU memory resource to use last entry to fix
   Tegra194 regression (Rob Herring)

 - Remove duplicate mvebu resource requests to fix regression on Turris
   Omnia (Rob Herring)

* tag 'pci-v5.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: mvebu: Fix duplicate resource requests
  PCI: dwc: Restore ATU memory resource setup to use last entry
  PCI: Always enable ACS even if no ACS Capability

htmldocs fails with:

drivers/infiniband/ulp/srpt/ib_srpt.c:630: warning: Function parameter or member 'port_cnt' not described in 'srpt_unregister_mad_agent'

Fixes: 372a1786 ("IB/srpt: Fix memory leak in srpt_add_one")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

* pm-cpufreq:
  cpufreq: schedutil: Don't skip freq update if need_freq_update is set

* pm-cpuidle:
  Documentation: PM: cpuidle: correct path name
  Documentation: PM: cpuidle: correct typo

* pm-opp:
  opp: Reduce the size of critical section in _opp_table_kref_release()
  opp: Fix early exit from dev_pm_opp_register_set_opp_helper()
  opp: Don't always remove static OPPs in _of_add_opp_table_v1()

* powercap:
  powercap/intel_rapl: remove unneeded semicolon

With commit 669cbc70 ("PCI: Move DT resource setup into
devm_pci_alloc_host_bridge()"), the DT 'ranges' is parsed and populated
into resources when the host bridge is allocated. The resources are
requested as well, but that happens a second time for the mvebu driver in
mvebu_pcie_parse_request_resources(). We should only be requesting the
additional resources added in mvebu_pcie_parse_request_resources().  These
are not added by default because they use custom properties rather than
standard DT address translation.

Also, the bus ranges was also populated by default, so we can remove it
from mvebu_pci_host_probe().

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=209729
Fixes: 669cbc70 ("PCI: Move DT resource setup into devm_pci_alloc_host_bridge()")
Link: https://lore.kernel.org/r/20201023145252.2691779-1-robh@kernel.org
Reported-by: vtolkm@googlemail.com
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Russell King <linux@armlinux.org.uk>

Prior to commit 0f71c60f ("PCI: dwc: Remove storing of PCI resources"),
the DWC driver was setting up the last memory resource rather than the
first memory resource. This doesn't matter for most platforms which only
have 1 memory resource, but it broke Tegra194 which has a 2nd
(prefetchable) memory region that requires an ATU entry. The first region
on Tegra194 relies on the default 1:1 pass-thru of outbound transactions
and doesn't need an ATU entry.

Fixes: 0f71c60f ("PCI: dwc: Remove storing of PCI resources")
Link: https://lore.kernel.org/r/20201026154852.221483-1-robh@kernel.orgReported-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>

Since commit 530b5aff ("spi: fsl-dspi: fix use-after-free in
remove path"), this driver causes a "NULL pointer dereference"
in dspi_suspend/resume.
This is because since this commit, the drivers private data point to
"dspi" instead of "ctlr", the codes in suspend and resume func were
not modified correspondly.

Fixes: 530b5aff ("spi: fsl-dspi: fix use-after-free in remove path")
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20201103020546.1822-1-qiang.zhao@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Since the kprobe handlers have protection that prohibits other handlers from
executing in other contexts (like if an NMI comes in while processing a
kprobe, and executes the same kprobe, it will get fail with a "busy"
return). Lockdep is unaware of this protection. Use lockdep's nesting api to
differentiate between locks taken in INT3 context and other context to
suppress the false warnings.

Link: https://lore.kernel.org/r/20201102160234.fa0ae70915ad9e2b21c08b85@kernel.org

Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

free_highpages() iterates over the free memblock regions in high
memory, and marks each page as available for the memory management
system.

Until commit cddb5ddf ("arm, xtensa: simplify initialization of
high memory pages") it rounded beginning of each region upwards and end of
each region downwards.

However, after that commit free_highmem() rounds the beginning and end of
each region downwards, and we may end up freeing a page that is
memblock_reserve()d, resulting in memory corruption.

Restore the original rounding of the region boundaries to avoid freeing
reserved pages.

Fixes: cddb5ddf ("arm, xtensa: simplify initialization of high memory pages")
Link: https://lore.kernel.org/r/20201029110334.4118-1-ardb@kernel.org/
Link: https://lore.kernel.org/r/20201031094345.6984-1-rppt@kernel.orgSigned-off-by: Ard Biesheuvel <ardb@kernel.org>
Co-developed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>

Merge tag 'perf-tools-for-v5.10-2020-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:
 "Only fixes and a sync of the headers so that the perf build is silent:

   - Fix visibility attribute in python module init code with newer gcc

   - Fix DRAM_BW_Use 0 issue for CLX/SKX in intel JSON vendor event
     files

   - Fix the build on new fedora by removing LTO compiler options when
     building perl support

   - Remove broken __no_tail_call attribute

   - Fix segfault when trying to trace events by cgroup

   - Fix crash with non-jited BPF progs

   - Increase buffer size in TUI browser, fixing format truncation

   - Fix printing of build-id for objects lacking one

   - Fix byte swapping for ino_generation field in MMAP2 perf.data
     records

   - Fix byte swapping for CGROUP perf.data records, for cross arch
     analysis of perf.data files

   - Fix the fast path of feature detection

   - Update kernel header copies"

* tag 'perf-tools-for-v5.10-2020-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (23 commits)
  tools feature: Fixup fast path feature detection
  perf tools: Add missing swap for cgroup events
  perf tools: Add missing swap for ino_generation
  perf tools: Initialize output buffer in build_id__sprintf
  perf hists browser: Increase size of 'buf' in perf_evsel__hists_browse()
  tools include UAPI: Update linux/mount.h copy
  tools headers UAPI: Update tools's copy of linux/perf_event.h
  tools kvm headers: Update KVM headers from the kernel sources
  tools UAPI: Update copy of linux/mman.h from the kernel sources
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  tools x86 headers: Update required-features.h header from the kernel
  tools x86 headers: Update cpufeatures.h headers copies
  tools headers UAPI: Update fscrypt.h copy
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers UAPI: Sync prctl.h with the kernel sources
  perf scripting python: Avoid declaring function pointers with a visibility attribute
  perf tools: Remove broken __no_tail_call attribute
  perf vendor events: Fix DRAM_BW_Use 0 issue for CLX/SKX
  perf trace: Fix segfault when trying to trace events by cgroup
  perf tools: Fix crash with non-jited bpf progs
  ...

Pull documentation build warning fixes from Jonathan Corbet:
 "This contains a series of warning fixes from Mauro; once applied, the
  number of warnings from the once-noisy docs build process is nearly
  zero.

  Getting to this point has required a lot of work; once there,
  hopefully we can keep things that way.

  I have packaged this as a separate pull because it does a fair amount
  of reaching outside of Documentation/. The changes are all in comments
  and in code placement. It's all been in linux-next since last week"

* tag 'docs-5.10-warnings' of git://git.lwn.net/linux: (24 commits)
  docs: SafeSetID: fix a warning
  amdgpu: fix a few kernel-doc markup issues
  selftests: kselftest_harness.h: fix kernel-doc markups
  drm: amdgpu_dm: fix a typo
  gpu: docs: amdgpu.rst: get rid of wrong kernel-doc markups
  drm: amdgpu: kernel-doc: update some adev parameters
  docs: fs: api-summary.rst: get rid of kernel-doc include
  IB/srpt: docs: add a description for cq_size member
  locking/refcount: move kernel-doc markups to the proper place
  docs: lockdep-design: fix some warning issues
  MAINTAINERS: fix broken doc refs due to yaml conversion
  ice: docs fix a devlink info that broke a table
  crypto: sun8x-ce*: update entries to its documentation
  net: phy: remove kernel-doc duplication
  mm: pagemap.h: fix two kernel-doc markups
  blk-mq: docs: add kernel-doc description for a new struct member
  docs: userspace-api: add iommu.rst to the index file
  docs: hwmon: mp2975.rst: address some html build warnings
  docs: net: statistics.rst: remove a duplicated kernel-doc
  docs: kasan.rst: add two missing blank lines
  ...

Pull documentation fixes from Jonathan Corbet:
 "A small number of fixes, plus a build tweak to respect the desire for
  silence in V=0 builds"

* tag 'docs-5.10-3' of git://git.lwn.net/linux:
  docs: fix automarkup regression on Python 2
  documentation: arm: sunxi: add Allwinner H6 documents
  scripts: kernel-doc: split typedef complex regex
  scripts: kernel-doc: fix typedef parsing
  docs: Makefile: honor V=0 for docs building

Pull x86 SEV-ES fixes from Borislav Petkov:
 "A couple of changes to the SEV-ES code to perform more stringent
  hypervisor checks before enabling encryption (Joerg Roedel)"

* tag 'x86_seves_for_v5.10_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sev-es: Do not support MMIO to/from encrypted memory
  x86/head/64: Check SEV encryption before switching to kernel page-table
  x86/boot/compressed/64: Check SEV encryption in 64-bit boot-path
  x86/boot/compressed/64: Sanity-check CPUID results in the early #VC handler
  x86/boot/compressed/64: Introduce sev_status

The cleanup for the yfs_store_opaque_acl2_operation calls the wrong
function to destroy the ACL content buffer.  It's an afs_acl struct, not
a yfs_acl struct - and the free function for latter may pass invalid
pointers to kfree().

Fix this by using the afs_acl_put() function.  The yfs_acl_put()
function is then no longer used and can be removed.

	general protection fault, probably for non-canonical address 0x7ebde00000000: 0000 [#1] SMP PTI
	...
	RIP: 0010:compound_head+0x0/0x11
	...
	Call Trace:
	 virt_to_cache+0x8/0x51
	 kfree+0x5d/0x79
	 yfs_free_opaque_acl+0x16/0x29
	 afs_put_operation+0x60/0x114
	 __vfs_setxattr+0x67/0x72
	 __vfs_setxattr_noperm+0x66/0xe9
	 vfs_setxattr+0x67/0xce
	 setxattr+0x14e/0x184
	 __do_sys_fsetxattr+0x66/0x8f
	 do_syscall_64+0x2d/0x3a
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: e49c7b2f ("afs: Build an abstraction around an "operation" concept")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When using the afs.yfs.acl xattr to change an AuriStor ACL, a warning
can be generated when the request is marshalled because the buffer
pointer isn't increased after adding the last element, thereby
triggering the check at the end if the ACL wasn't empty.  This just
causes something like the following warning, but doesn't stop the call
from happening successfully:

    kAFS: YFS.StoreOpaqueACL2: Request buffer underflow (36<108)

Fix this simply by increasing the count prior to the check.

Fixes: f5e45463 ("afs: Implement YFS ACL setting")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It turns out that the Python 2 re module lacks the ASCII flag, so don't try
to use it there.

Fixes: f66e47f9 ("docs: automarkup.py: Fix regexes to solve sphinx 3 warnings")
Reported-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Commit fc0e38da ("GFS2: Fix glock deallocation race") fixed a
sd_glock_disposal accounting bug by adding a missing atomic_dec
statement, but it failed to wake up sd_glock_wait when that decrement
causes sd_glock_disposal to reach zero.  As a consequence,
gfs2_gl_hash_clear can now run into a 10-minute timeout instead of
being woken up.  Add the missing wakeup.

Fixes: fc0e38da ("GFS2: Fix glock deallocation race")
Cc: stable@vger.kernel.org # v2.6.39+
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

regulator_get_voltage_rdev() is called in regulator probe() when
applying machine constraints.  The "fixed" commit exposed the problem
that non-bypassed regulators can forward the request to its parent
(like bypassed ones) supply. Return -EPROBE_DEFER when the supply
is expected but not resolved yet.

Fixes: aea6cb99 ("regulator: resolve supply after creating regulator")
Cc: stable@vger.kernel.org
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reported-by: Ondřej Jirman <megous@megous.com>
Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Ondřej Jirman <megous@megous.com>
Link: https://lore.kernel.org/r/a9041d68b4d35e4a2dd71629c8a6422662acb5ee.1604351936.git.mirq-linux@rere.qmqm.plSigned-off-by: Mark Brown <broonie@kernel.org>

22dd1ac9 ("tools: Remove feature-libelf-mmap feature detection")
correctly simplified the this feature detection, but forgot to remove
the call to the removed function in the main() function for the
test-all.c fast path feature detection, making it fail and thus do all
the feature detection individually, fix it.

  $ cat /tmp/build/perf/feature/test-all.make.output
  test-all.c: In function ‘main’:
  test-all.c:188:2: error: implicit declaration of function ‘main_test_libelf_mmap’; did you mean ‘main_test_libelf’? [-Werror=implicit-function-declaration]
    188 |  main_test_libelf_mmap();
        |  ^~~~~~~~~~~~~~~~~~~~~
        |  main_test_libelf
  cc1: all warnings being treated as errors
  $ vim tools/build/feature/test-all.c
  $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ;make V=1 -k O=/tmp/build/perf  -C tools/perf install-bin ; perf test python
  <SNIP>
  $ cat /tmp/build/perf/feature/test-all.make.output
  $

Fixes: 22dd1ac9 ("tools: Remove feature-libelf-mmap feature detection")
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

It was missed to add a swap function for PERF_RECORD_CGROUP.

Fixes: ba78c1c5 ("perf tools: Basic support for CGROUP event")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201102140228.303657-1-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We are missing swap for ino_generation field.

Fixes: 5c5e854b ("perf tools: Add attr->mmap2 support")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20201101233103.3537427-2-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We display garbage for undefined build_id objects, because we don't
initialize the output buffer.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20201101233103.3537427-1-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Making perf with gcc-9.1.1 generates the following warning:

    CC       ui/browsers/hists.o
  ui/browsers/hists.c: In function 'perf_evsel__hists_browse':
  ui/browsers/hists.c:3078:61: error: '%d' directive output may be \
  truncated writing between 1 and 11 bytes into a region of size \
  between 2 and 12 [-Werror=format-truncation=]

   3078 |       "Max event group index to sort is %d (index from 0 to %d)",
        |                                                             ^~
  ui/browsers/hists.c:3078:7: note: directive argument in the range [-2147483648, 8]
   3078 |       "Max event group index to sort is %d (index from 0 to %d)",
        |       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  In file included from /usr/include/stdio.h:937,
                   from ui/browsers/hists.c:5:

IOW, the string in line 3078 might be too long for buf[] of 64 bytes.

Fix this by increasing the size of buf[] to 128.

Fixes: dbddf174  ("perf report/top TUI: Support hotkeys to let user select any event for sorting")
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: stable@vger.kernel.org # v5.7+
Link: http://lore.kernel.org/lkml/20201030235431.534417-1-songliubraving@fb.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the changes from:

  dab741e0 ("Add a "nosymfollow" mount option.")

That ends up adding support for the new MS_NOSYMFOLLOW mount flag:

  $ tools/perf/trace/beauty/mount_flags.sh > before
  $ cp include/uapi/linux/mount.h tools/include/uapi/linux/mount.h
  $ tools/perf/trace/beauty/mount_flags.sh > after
  $ diff -u before after
  --- before	2020-11-03 08:51:28.117997454 -0300
  +++ after	2020-11-03 08:51:38.992218869 -0300
  @@ -7,6 +7,7 @@
   	[32 ? (ilog2(32) + 1) : 0] = "REMOUNT",
   	[64 ? (ilog2(64) + 1) : 0] = "MANDLOCK",
   	[128 ? (ilog2(128) + 1) : 0] = "DIRSYNC",
  +	[256 ? (ilog2(256) + 1) : 0] = "NOSYMFOLLOW",
   	[1024 ? (ilog2(1024) + 1) : 0] = "NOATIME",
   	[2048 ? (ilog2(2048) + 1) : 0] = "NODIRATIME",
   	[4096 ? (ilog2(4096) + 1) : 0] = "BIND",
  $

So now one can use it in --filter expressions for tracepoints.

This silences this perf build warnings:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/mount.h' differs from latest version at 'include/uapi/linux/mount.h'
  diff -u tools/include/uapi/linux/mount.h include/uapi/linux/mount.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mattias Nissler <mnissler@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The diff is just tabs versus spaces, trivial.

This silences this perf tools build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h'
  diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Some should cause changes in tooling, like the one adding LAST_EXCP, but
the way it is structured end up not making that happen.

The new SVM_EXIT_INVPCID should get used by arch/x86/util/kvm-stat.c,
in the svm_exit_reasons table.

The tools/perf/trace/beauty part has scripts to catch changes and
automagically create tables, like tools/perf/trace/beauty/kvm_ioctl.sh,
but changes are needed to make tools/perf/arch/x86/util/kvm-stat.c catch
those automatically.

These were handled by the existing scripts:

  $ tools/perf/trace/beauty/kvm_ioctl.sh > before
  $ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h
  $ tools/perf/trace/beauty/kvm_ioctl.sh > after
  $ diff -u before after
  --- before	2020-11-03 08:43:52.910728608 -0300
  +++ after	2020-11-03 08:44:04.273959984 -0300
  @@ -89,6 +89,7 @@
   	[0xbf] = "SET_NESTED_STATE",
   	[0xc0] = "CLEAR_DIRTY_LOG",
   	[0xc1] = "GET_SUPPORTED_HV_CPUID",
  +	[0xc6] = "X86_SET_MSR_FILTER",
   	[0xe0] = "CREATE_DEVICE",
   	[0xe1] = "SET_DEVICE_ATTR",
   	[0xe2] = "GET_DEVICE_ATTR",
  $
  $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before
  $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h
  $
  $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after
  $ diff -u before after
  --- before	2020-11-03 08:45:55.522225198 -0300
  +++ after	2020-11-03 08:46:12.881578666 -0300
  @@ -37,4 +37,5 @@
   	[0x71] = "VDPA_GET_STATUS",
   	[0x73] = "VDPA_GET_CONFIG",
   	[0x76] = "VDPA_GET_VRING_NUM",
  +	[0x78] = "VDPA_GET_IOVA_RANGE",
   };
  $

This addresses these perf build warnings:

  Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
  diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
  Warning: Kernel ABI header at 'tools/arch/s390/include/uapi/asm/sie.h' differs from latest version at 'arch/s390/include/uapi/asm/sie.h'
  diff -u tools/arch/s390/include/uapi/asm/sie.h arch/s390/include/uapi/asm/sie.h
  Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
  diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
  Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/svm.h' differs from latest version at 'arch/x86/include/uapi/asm/svm.h'
  diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h
  Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
  diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
  Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h'
  diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

  e47168f3 ("powerpc/8xx: Support 16k hugepages with 4k pages")

That don't cause any changes in tooling, just addresses this perf build
warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/mman.h' differs from latest version at 'include/uapi/linux/mman.h'
  diff -u tools/include/uapi/linux/mman.h include/uapi/linux/mman.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick up the changes in:

  29dcc60f ("x86/boot/compressed/64: Add stage1 #VC handler")
  36e1be8a ("perf/x86/amd/ibs: Fix raw sample data accumulation")
  59a854e2 ("perf/x86/intel: Support TopDown metrics on Ice Lake")
  7b2c05a1 ("perf/x86/intel: Generic support for hardware TopDown metrics")
  99e40204 ("x86/msr: Move the F15h MSRs where they belong")
  b57de6cd ("x86/sev-es: Add SEV-ES Feature Detection")
  ed7bde7a ("cpufreq: intel_pstate: Allow enable/disable energy efficiency")
  f0f2f9fe ("x86/msr-index: Define an IA32_PASID MSR")

That cause these changes in tooling:

  $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
  $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
  $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
  $ diff -u before after
  --- before	2020-10-19 13:27:33.195274425 -0300
  +++ after	2020-10-19 13:27:44.144507610 -0300
  @@ -113,6 +113,8 @@
   	[0x00000309] = "CORE_PERF_FIXED_CTR0",
   	[0x0000030a] = "CORE_PERF_FIXED_CTR1",
   	[0x0000030b] = "CORE_PERF_FIXED_CTR2",
  +	[0x0000030c] = "CORE_PERF_FIXED_CTR3",
  +	[0x00000329] = "PERF_METRICS",
   	[0x00000345] = "IA32_PERF_CAPABILITIES",
   	[0x0000038d] = "CORE_PERF_FIXED_CTR_CTRL",
   	[0x0000038e] = "CORE_PERF_GLOBAL_STATUS",
  @@ -222,6 +224,7 @@
   	[0x00000774] = "HWP_REQUEST",
   	[0x00000777] = "HWP_STATUS",
   	[0x00000d90] = "IA32_BNDCFGS",
  +	[0x00000d93] = "IA32_PASID",
   	[0x00000da0] = "IA32_XSS",
   	[0x00000dc0] = "LBR_INFO_0",
   	[0x00000ffc] = "IA32_BNDCFGS_RSVD",
  @@ -279,6 +282,7 @@
   	[0xc0010115 - x86_AMD_V_KVM_MSRs_offset] = "VM_IGNNE",
   	[0xc0010117 - x86_AMD_V_KVM_MSRs_offset] = "VM_HSAVE_PA",
   	[0xc001011f - x86_AMD_V_KVM_MSRs_offset] = "AMD64_VIRT_SPEC_CTRL",
  +	[0xc0010130 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_SEV_ES_GHCB",
   	[0xc0010131 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_SEV",
   	[0xc0010140 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_OSVW_ID_LENGTH",
   	[0xc0010141 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_OSVW_STATUS",
  $

Which causes these parts of tools/perf/ to be rebuilt:

  CC       /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o
  DESCEND  plugins
  GEN      /tmp/build/perf/python/perf.so
  INSTALL  trace_plugins
  LD       /tmp/build/perf/trace/beauty/tracepoints/perf-in.o
  LD       /tmp/build/perf/trace/beauty/perf-in.o
  LD       /tmp/build/perf/perf-in.o
  LINK     /tmp/build/perf/per

At some point these should just be tables read by perf on demand.

This addresses this perf tools build warning:

  diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the changes from:

  ecac7181 ("x86/paravirt: Use CONFIG_PARAVIRT_XXL instead of CONFIG_PARAVIRT")

That don entail any changes in tooling, just addressing these perf tools
build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/required-features.h' differs from latest version at 'arch/x86/include/asm/required-features.h'
  diff -u tools/arch/x86/include/asm/required-features.h arch/x86/include/asm/required-features.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the changes from:

  5866e920 ("x86/cpu: Add hardware-enforced cache coherency as a CPUID feature")
  ff4f8281 ("x86/cpufeatures: Enumerate ENQCMD and ENQCMDS instructions")
  360e7c5c ("x86/cpufeatures: Add SEV-ES CPU feature")
  18ec63fa ("x86/cpufeatures: Enumerate TSX suspend load address tracking instructions")
  e48cb1a3 ("x86/resctrl: Enumerate per-thread MBA controls")

Which don't cause any changes in tooling, just addresses these build
warnings:

  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
  diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h'
  diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Cc: Kyung Min Park <kyung.min.park@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To get the changes from:

  c7f0207b ("fscrypt: make "#define fscrypt_policy" user-only")

That don't cause any changes in tools/perf, only addresses this perf
tools build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/fscrypt.h' differs from latest version at 'include/uapi/linux/fscrypt.h'
  diff -u tools/include/uapi/linux/fscrypt.h include/uapi/linux/fscrypt.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>