Variable delay is being assigned to zero and the code falls through to
the next case in a switch statement that returns out of the function.
The variable is never read in this scenario and so the assignment is
redundant and can be removed.

Cleans up scan-build static analysis warning:
drivers/phy/rockchip/phy-rockchip-inno-usb2.c:753:3: warning: Value
stored to 'delay' is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20211211180054.525368-1-colin.i.king@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Remove the set_speed function and allow the driver to figure out the
speed at which needs to configure the serdes based on the interface type.

Fixes: 30552490 ("phy: Add lan966x ethernet serdes PHY driver")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20211211214717.1284306-1-horatiu.vultur@microchip.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Use IS_ERR_OR_NULL() to make the code cleaner.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20211212142226.23674-1-linmq006@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add devicetree compatible for the usb phy on SM6350 SoC.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20211213082614.22651-5-luca.weiss@fairphone.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

callers of tegra_xusb_find_port_node() function only do NULL checking for
the return value. return NULL instead of ERR_PTR(-ENOMEM) to keep
consistent.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211213020507.1458-1-linmq006@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Use struct_size() to get the accurate size of `clk_hw_onecell_data`
with a variable size array, instead of sizeof(data) to get the size
of a pointer.
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Fixes: f199223c ("phy: qcom: Introduce new eDP PHY driver")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211209032114.9416-1-guozhengkui@vivo.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

SM8450 UFS seems to use same sequence as SM8350, so reuse the sequence
from SM8450. Add the new clock list for this phy and the new compatible
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Co-developed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20211201074456.3969849-4-vkoul@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Document the UFS phy compatible for QMP UFS phy found in SM8450 SoC.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20211201074456.3969849-3-vkoul@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Document "qcom,sm8450-ufshc" compatible string. "qcom,sm8450-ufshc" is
for UFS HC found in SM8450 SoC.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20211201074456.3969849-2-vkoul@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Currently the driver is supporting only the interfaces QSGMII, SGMII,
RGMII and GMII. This patch extend the supported interfaces with
1000BASE-X and 2500BASE-X.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20211130101015.164916-1-horatiu.vultur@microchip.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1637822289-24534-1-git-send-email-zou_wei@huawei.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Change stm32-usbphyc driver to use dev_err_probe(), to benefit of
devices_deferred debugfs in case of probe deferral.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/1635172265-26219-1-git-send-email-fabrice.gasnier@foss.st.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Improve message & use dev_err_probe() helper which prints actual error
(helpful for debugging) and deals with -EPROBE_DEFER.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211123221521.25323-1-zajec5@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add support of eMMC PHY for Intel Thunder Bay SoC,
uses the Arasan eMMC phy
Signed-off-by: Rashmi A <rashmi.a@intel.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20211027115516.4475-5-rashmi.a@intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Binding description for Intel Thunder Bay eMMC PHY.
Added the newly introduced files into MAINTAINERS file-list
Signed-off-by: Rashmi A <rashmi.a@intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211027115516.4475-4-rashmi.a@intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add the Microchip lan966x ethernet serdes PHY driver for interfaces
available in the lan966x SoC.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20211116100818.1615762-4-horatiu.vultur@microchip.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Lan966x has: 2 integrated PHYs, 3 SerDes and 2 RGMII interfaces. Which
requires to be muxed based on the HW representation.

So add constants for each interface to be able to distinguish them.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20211116100818.1615762-3-horatiu.vultur@microchip.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Document the lan966x ethernet serdes phy driver bindings.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20211116100818.1615762-2-horatiu.vultur@microchip.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

In some cases the standby/enable gpio can be pulled low/high and would not
be connected to a gpio. The current driver implementation will return an
error in these cases. Therefore, make devm_gpiod_get optional.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20211102112120.23637-1-a-govindraju@ti.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid
opencoding it.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Link: https://lore.kernel.org/r/20211104065233.1833499-1-yang.guang5@zte.com.cnSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add support for PHY interface built into ahci controller implemented
in UniPhier Pro4 SoC.

Pro4 SoC distinguishes it from other SoCs as "legacy" SoC, which has GIO
clock line. And Pro4 AHCI-PHY needs to control additional reset lines
("pm", "tx", and "rx").
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1635503947-18250-9-git-send-email-hayashi.kunihiko@socionext.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Update AHCI-PHY binding document for UniPhier Pro4 SoC. Add a compatible
string, clock and reset lines for the SoC to the document.

Pro4 AHCI-PHY needs to control additional GIO clock line and reset lines
("pm", "tx", and "rx").
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1635503947-18250-8-git-send-email-hayashi.kunihiko@socionext.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

NX1 SoC supports 2 lanes and has dual-phy. Should set appropriate
configuration values to both PHY registers.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1635503947-18250-7-git-send-email-hayashi.kunihiko@socionext.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Set VCOPLL clamp mode to mode 0 to avoid hardware unstable issue.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1635503947-18250-6-git-send-email-hayashi.kunihiko@socionext.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add basic support for UniPhier NX1 SoC. This includes a compatible string,
SoC-dependent data, and a function that set to 2-lane mode.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1635503947-18250-5-git-send-email-hayashi.kunihiko@socionext.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Update PCIe-PHY binding document for UniPhier NX1 SoC. Add a compatible
string for the SoC to the document.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1635503947-18250-4-git-send-email-hayashi.kunihiko@socionext.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add basic support for UniPhier NX1 SoC. This includes a compatible string
and the same SoC-dependent data as LD20/PXs3 SoCs.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1635503947-18250-3-git-send-email-hayashi.kunihiko@socionext.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Update USB3-PHY binding document for UniPhier NX1 SoC. Add SS-PHY and
HS-PHY compatible strings for the SoC to the document.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1635503947-18250-2-git-send-email-hayashi.kunihiko@socionext.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Convert Tegra194 P2U binding to the YAML format.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211031113236.29712-1-david@ixit.czSigned-off-by: Vinod Koul <vkoul@kernel.org>

Amlogic Meson8/8b/8m2 have a built-in HDMI PHY in the HHI register
region. Unfortunately only few register bits are documented. For
HHI_HDMI_PHY_CNTL0 the magic numbers are taken from the 3.10 vendor
kernel.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20211020195107.1564533-3-martin.blumenstingl@googlemail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Amlogic Meson8, Meson8b and Meson8m2 all include an identical (or at
least very similar) HDMI TX PHY. The PHY registers are part of the HHI
register area.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211020195107.1564533-2-martin.blumenstingl@googlemail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Many recent Qualcomm platforms comes with native DP and eDP support.
This consists of a controller in the MDSS and a QMP-like PHY.

While similar to the well known QMP block, the eDP PHY only has TX lanes
and the programming sequences are slightly different. Rather than
continuing the trend of parameterize the QMP driver to pieces, this
introduces the support as a new driver.

The registration of link and pixel clocks are borrowed from the QMP
driver. The non-DP link frequencies are omitted for now.

The eDP PHY is very similar to the dedicated (non-USB) DP PHY, but only
the prior is supported for now.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211103234410.1352424-2-bjorn.andersson@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Introduce a binding for the eDP PHY hardware block found in several
different Qualcomm platforms.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211103234410.1352424-1-bjorn.andersson@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Updated DT binding maps just a PHY's register space instead of the whole
DMU block. Accessing a common CRU reg is handled using syscon &
regmap.

The old binding has been deprecated and remains supported as a fallback
method.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20211026093716.5567-1-zajec5@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add Kconfig support for -Wimplicit-fallthrough for both GCC and Clang.

The compiler option is under configuration CC_IMPLICIT_FALLTHROUGH,
which is enabled by default.

Special thanks to Nathan Chancellor who fixed the Clang bug[1][2]. This
bugfix only appears in Clang 14.0.0, so older versions still contain
the bug and -Wimplicit-fallthrough won't be enabled for them, for now.

This concludes a long journey and now we are finally getting rid
of the unintentional fallthrough bug-class in the kernel, entirely. :)

Link: https://github.com/llvm/llvm-project/commit/9ed4a94d6451046a51ef393cd62f00710820a7e8 [1]
Link: https://bugs.llvm.org/show_bug.cgi?id=51094 [2]
Link: https://github.com/KSPP/linux/issues/115
Link: https://github.com/ClangBuiltLinux/linux/issues/236Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull xfs cleanups from Darrick Wong:
 "The most 'exciting' aspect of this branch is that the xfsprogs
  maintainer and I have worked through the last of the code
  discrepancies between kernel and userspace libxfs such that there are
  no code differences between the two except for #includes.

  IOWs, diff suffices to demonstrate that the userspace tools behave the
  same as the kernel, and kernel-only bits are clearly marked in the
  /kernel/ source code instead of just the userspace source.

  Summary:

   - Clean up open-coded swap() calls.

   - A little bit of #ifdef golf to complete the reunification of the
     kernel and userspace libxfs source code"

* tag 'xfs-5.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: sync xfs_btree_split macros with userspace libxfs
  xfs: #ifdef out perag code for userspace
  xfs: use swap() to make dabtree code cleaner

Pull more parisc fixes from Helge Deller:
 "Fix a build error in stracktrace.c, fix resolving of addresses to
  function names in backtraces, fix single-stepping in assembly code and
  flush userspace pte's when using set_pte_at()"

* tag 'for-5.16/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc/entry: fix trace test in syscall exit path
  parisc: Flush kernel data mapping in set_pte_at() when installing pte for user page
  parisc: Fix implicit declaration of function '__kernel_text_address'
  parisc: Fix backtrace to always include init funtion names

Pull arch/sh updates from Rich Felker.

* tag 'sh-for-5.16' of git://git.libc.org/linux-sh:
  sh: pgtable-3level: Fix cast to pointer from integer of different size
  sh: fix READ/WRITE redefinition warnings
  sh: define __BIG_ENDIAN for math-emu
  sh: math-emu: drop unused functions
  sh: fix kconfig unmet dependency warning for FRAME_POINTER
  sh: Cleanup about SPARSE_IRQ
  sh: kdump: add some attribute to function
  maple: fix wrong return value of maple_bus_init().
  sh: boot: avoid unneeded rebuilds under arch/sh/boot/compressed/
  sh: boot: add intermediate vmlinux.bin* to targets instead of extra-y
  sh: boards: Fix the cacography in irq.c
  sh: check return code of request_irq
  sh: fix trivial misannotations

Pull ARM fixes from Russell King:

 - Fix early_iounmap

 - Drop cc-option fallbacks for architecture selection

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9156/1: drop cc-option fallbacks for architecture selection
  ARM: 9155/1: fix early early_iounmap()