- 28 Jul, 2023 40 commits
-
-
Petr Machata authored
Using the tracking helpers makes it easier to debug netdevice refcount imbalances when CONFIG_NET_DEV_REFCNT_TRACKER is enabled. Convert dev_hold() / dev_put() to netdev_hold() / netdev_put() in the router code that deals with hw_stats events. Signed-off-by:
Petr Machata <petrm@nvidia.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/b972314cfef4f4c24e66e60d13cffa5d606d1bf3.1690471774.git.petrm@nvidia.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Petr Machata authored
Using the tracking helpers makes it easier to debug netdevice refcount imbalances when CONFIG_NET_DEV_REFCNT_TRACKER is enabled. Convert dev_hold() / dev_put() to netdev_hold() / netdev_put() in the router code that deals with FIB events. Signed-off-by:
-
Petr Machata authored
Using the tracking helpers makes it easier to debug netdevice refcount imbalances when CONFIG_NET_DEV_REFCNT_TRACKER is enabled. Convert dev_hold() / dev_put() to netdev_hold() / netdev_put() in the switchdev module. Signed-off-by:
-
Petr Machata authored
mlxsw_sp_nve_fid_disable() is always called under RTNL. It is therefore safe to call __dev_get_by_index() to get the netdevice pointer without bumping the reference count, because we can be sure the netdevice is not going away. That then obviates the need to put the netdevice later in the function. Signed-off-by:
-
Petr Machata authored
As of commit 151b89f6 ("mlxsw: spectrum_router: Reuse work neighbor initialization in work scheduler"), the functions mlxsw_sp_port_lower_dev_hold() and mlxsw_sp_port_dev_put() have no users. Drop them. Signed-off-by:
-
Patrick Rohr authored
accept_ra_min_rtr_lft only considered the lifetime of the default route and discarded entire RAs accordingly. This change renames accept_ra_min_rtr_lft to accept_ra_min_lft, and applies the value to individual RA sections; in particular, router lifetime, PIO preferred lifetime, and RIO lifetime. If any of those lifetimes are lower than the configured value, the specific RA section is ignored. In order for the sysctl to be useful to Android, it should really apply to all lifetimes in the RA, since that is what determines the minimum frequency at which RAs must be processed by the kernel. Android uses hardware offloads to drop RAs for a fraction of the minimum of all lifetimes present in the RA (some networks have very frequent RAs (5s) with high lifetimes (2h)). Despite this, we have encountered networks that set the router lifetime to 30s which results in very frequent CPU wakeups. Instead of disabling IPv6 (and dropping IPv6 ethertype in the WiFi firmware) entirely on such networks, it seems better to ignore the misconfigured routers while still processing RAs from other IPv6 routers on the same network (i.e. to support IoT applications). The previous implementation dropped the entire RA based on router lifetime. This turned out to be hard to expand to the other lifetimes present in the RA in a consistent manner; dropping the entire RA based on RIO/PIO lifetimes would essentially require parsing the whole thing twice. Fixes: 1671bcfd ("net: add sysctl accept_ra_min_rtr_lft") Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by:
Patrick Rohr <prohr@google.com> Reviewed-by:
Maciej Żenczykowski <maze@google.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230726230701.919212-1-prohr@google.comSigned-off-by:
-
Jakub Kicinski authored
Jakub Kicinski says: ==================== net: store netdevs in an xarray One of more annoying developer experience gaps we have in netlink is iterating over netdevs. It's painful. Add an xarray to make it trivial. v1: https://lore.kernel.org/all/20230722014237.4078962-1-kuba@kernel.org/ ==================== Link: https://lore.kernel.org/r/20230726185530.2247698-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Reap the benefits of easier iteration thanks to the xarray. Convert just the genetlink ones, those are easier to test. Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230726185530.2247698-3-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Iterating over the netdev hash table for netlink dumps is hard. Dumps are done in "chunks" so we need to save the position after each chunk, so we know where to restart from. Because netdevs are stored in a hash table we remember which bucket we were in and how many devices we dumped. Since we don't hold any locks across the "chunks" - devices may come and go while we're dumping. If that happens we may miss a device (if device is deleted from the bucket we were in). We indicate to user space that this may have happened by setting NLM_F_DUMP_INTR. User space is supposed to dump again (I think) if it sees that. Somehow I doubt most user space gets this right.. To illustrate let's look at an example: System state: start: # [A, B, C] del: B # [A, C] with the hash table we may dump [A, B], missing C completely even tho it existed both before and after the "del B". Add an xarray and use it to allocate ifindexes. This way we can iterate ifindexes in order, without the worry that we'll skip one. We may still generate a dump of a state which "never existed", for example for a set of values and sequence of ops: System state: start: # [A, B] add: C # [A, C, B] del: B # [A, C] we may generate a dump of [A], if C got an index between A and B. System has never been in such state. But I'm 90% sure that's perfectly fine, important part is that we can't _miss_ devices which exist before and after. User space which wants to mirror kernel's state subscribes to notifications and does periodic dumps so it will know that C exists from the notification about its creation or from the next dump (next dump is _guaranteed_ to include C, if it doesn't get removed). To avoid any perf regressions keep the hash table for now. Most net namespaces have very few devices and microbenchmarking 1M lookups on Skylake I get the following results (not counting loopback to number of devs): #devs | hash | xa | delta 2 | 18.3 | 20.1 | + 9.8% 16 | 18.3 | 20.1 | + 9.5% 64 | 18.3 | 26.3 | +43.8% 128 | 20.4 | 26.3 | +28.6% 256 | 20.0 | 26.4 | +32.1% 1024 | 26.6 | 26.7 | + 0.2% 8192 |541.3 | 33.5 | -93.8% No surprises since the hash table has 256 entries. The microbenchmark scans indexes in order, if the pattern is more random xa starts to win at 512 devices already. But that's a lot of devices, in practice. Reviewed-by: -
Jakub Kicinski authored
Stanislav Fomichev says: ==================== ynl: couple of unrelated fixes - spelling of xdp-features - s/xdp_zc_max_segs/xdp-zc-max-segs/ - expose xdp-zc-max-segs - add /* private: */ - regenerate headers - print xdp_zc_max_segs from sample ==================== Link: https://lore.kernel.org/r/20230727163001.3952878-1-sdf@google.comSigned-off-by:
-
Stanislav Fomichev authored
Technically we don't have to keep extending the sample, but it feels useful to run these tools locally to confirm everything is working. Signed-off-by:
Stanislav Fomichev <sdf@google.com> Reviewed-by:
-
Stanislav Fomichev authored
Also add support to pass topdir to ynl-regen.sh (Jakub) and call it from the makefile to update the UAPI headers. Signed-off-by:
-
Stanislav Fomichev authored
Simon mentioned in another thread that it makes kdoc happy and Jakub confirms that commit e27cb89a ("scripts: kernel-doc: support private / public marking for enums") actually added the needed support. Signed-off-by:
-
Stanislav Fomichev authored
Also rename it to dashes, to match the rest. And fix unrelated spelling error while we're at it. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/nexDavid S. Miller authored
t-queue Tony Nguyen says: ==================== ice: Implement support for SRIOV + LAG Dave Ertman says: Implement support for SRIOV VF's on interfaces that are in an aggregate interface. The first interface added into the aggregate will be flagged as the primary interface, and this primary interface will be responsible for managing the VF's resources. VF's created on the primary are the only VFs that will be supported on the aggregate. Only Active-Backup mode will be supported and only aggregates whose primary interface is in switchdev mode will be supported. The ice-lag DDP must be loaded to support this feature. Additional restrictions on what interfaces can be added to the aggregate and still support SRIOV VFs are: - interfaces have to all be on the same physical NIC - all interfaces have to have the same QoS settings - interfaces have to have the FW LLDP agent disabled - only the primary interface is to be put into switchdev mode - no more than two interfaces in the aggregate --- v2: - Move NULL check for q_ctx in ice_lag_qbuf_recfg() earlier (patch 6) v1: https://lore.kernel.org/netdev/20230726182141.3797928-1-anthony.l.nguyen@intel.com/ ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hangbin Liu authored
Add extack info for IPv6 address add/delete, which would be useful for users to understand the problem without having to read kernel code. Suggested-by:
Beniamino Galvani <bgalvani@redhat.com> Reviewed-by:
Hangbin Liu <liuhangbin@gmail.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
David S. Miller authored
Alex Maftei says: ==================== selftests/ptp: Add support for new timestamp IOCTLs PTP_SYS_OFFSET_EXTENDED was added in November 2018 in 36180087 (" ptp: add PTP_SYS_OFFSET_EXTENDED ioctl") and PTP_SYS_OFFSET_PRECISE was added in February 2016 in 719f1aa4 ("ptp: Add PTP_SYS_OFFSET_PRECISE for driver crosstimestamping") The PTP selftest code is lacking support for these two IOCTLS. This short series of patches adds support for them. Changes in v2: - Fixed rebase issues (v1 somehow ended up with patch 1 being from the first manual split of my changes and patch 2 being from rebase 2 out of 3) - Rebased on top of net-next ==================== Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Alex Maftei authored
The -X option was chosen because X looks like a cross, and the underlying callback is 'get cross timestamp'. Signed-off-by:
Alex Maftei <alex.maftei@amd.com> Signed-off-by:
-
Alex Maftei authored
The -x option (where 'x' stands for eXtended) takes an argument which represents the number of samples to request from the PTP device. The help message will display the maximum number of samples allowed. Providing an invalid argument will also display the maximum number of samples allowed. Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-next-for-6.6-20230728' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next linux-can-next-for-6.6-20230728 Marc Kleine-Budde says: ==================== Hello netdev-team, this is a pull request of 21 patches for net-next/master. The 1st patch is by Gerhard Uttenthaler, which adds Gerhard as the maintainer ems_pci driver. Peter Seiderer's patch removes a unused function from the peak_usb driver. The next 4 patches are by John Watts and add support for the sun4i_can driver on the Allwinner D1. Rob Herring's patch corrects the DT includes in various CAN drivers. Followed by 14 patches from me concerning the gs_usb driver. The first 11 are various cleanups consisting of coding style improvements, error path printout cleanups, and removal of unneeded usb_kill_anchored_urbs(). The last 3 convert the driver to use NAPI to avoid out-of-order reception of CAN frames. ==================== Signed-off-by:
-
David S. Miller authored
Martin Habets says: ==================== sfc: Remove Siena bits from sfc.ko Last year we split off Siena into it's own driver under directory siena. This patch series removes the now unused Falcon and Siena code from sfc.ko. No functional changes are intended. ==================== Signed-off-by: -
Martin Habets authored
It was only used for Siena SRIOV, so nothing includes it any more in this directory. Signed-off-by:
Martin Habets <habetsm.xilinx@gmail.com> Acked-by:
Edward Cree <ecree.xilinx@gmail.com> Signed-off-by:
-
Martin Habets authored
Most of the Falcon locking description does not apply to EF10. Signed-off-by:
-
Martin Habets authored
Remove comments that only apply to Falcon and Siena. Signed-off-by:
-
Martin Habets authored
The attributes index and entries are no longer needed, so use struct efx_buffer instead. next_buffer_table was also Siena specific. Removed some checkpatch warnings. Signed-off-by:
-
Martin Habets authored
unicast_filter and multicast_hash are no longer needed. Signed-off-by:
-
Martin Habets authored
The special handling for SRIOV reset and FLR is not needed on EF10. Signed-off-by:
-
Martin Habets authored
rx_tx_inline is now always true. The special event list is no longer needed, event handling is always inline. Event MCDI_EVENT_CODE_PTP_RX is no longer needed. Signed-off-by:
-
Martin Habets authored
The workarounds for bug 8568 and 17213 are no longer needed. Signed-off-by:
-
Martin Habets authored
This also removes TC support code, since that was never supported for EF10. TC support for EF100 is not handled from efx.c. Signed-off-by:
-
Martin Habets authored
These are no longer used, and the two Siena specific functions are no longer present in sfc.ko. Signed-off-by:
-
Martin Habets authored
Siena was using functions from the Falcon architecture. These start with the efx_farch prefix. Now that both of these are in separate modules the references are no longer used in the sfc.ko module. Signed-off-by:
-
David S. Miller authored
Joe Damato says: ==================== rxfh with custom RSS fixes Greetings: Welcome to v2, now via net-next. No functional changes; only style changes (see the summary below). While attempting to get the RX flow hash key for a custom RSS context on my mlx5 NIC, I got an error: $ sudo ethtool -u eth1 rx-flow-hash tcp4 context 1 Cannot get RX network flow hashing options: Invalid argument I dug into this a bit and noticed two things: 1. ETHTOOL_GRXFH supports custom RSS contexts, but ETHTOOL_SRXFH does not. I moved the copy logic out of ETHTOOL_GRXFH and into a helper so that both ETHTOOL_{G,S}RXFH now call it, which fixes ETHTOOL_SRXFH. This is patch 1/2. 2. mlx5 defaulted to RSS context 0 for both ETHTOOL_{G,S}RXFH paths. I have modified the driver to support custom contexts for both paths. It is now possible to get and set the flow hash key for custom RSS contexts with mlx5. This is patch 2/2. See commit messages for more details. Thanks. v2: - Rebased on net-next - Adjusted arguments of mlx5e_rx_res_rss_get_hash_fields and mlx5e_rx_res_rss_set_hash_fields to move rss_idx next to the rss argument - Changed return value of both mlx5e_rx_res_rss_get_hash_fields and mlx5e_rx_res_rss_set_hash_fields to -ENOENT when the rss entry is NULL - Changed order of local variables in mlx5e_get_rss_hash_opt and mlx5e_set_rss_hash_opt ==================== Signed-off-by: -
Joe Damato authored
mlx5 flow hash field retrieval and set only worked on the default RSS context as of commit f01cc58c ("net/mlx5e: Support multiple RSS contexts"), not custom RSS contexts. For example, before this patch attempting to retrieve the flow hash fields for RSS context 1 fails: $ sudo ethtool -u eth1 rx-flow-hash tcp4 context 1 Cannot get RX network flow hashing options: Invalid argument This patch fixes getting and setting the flow hash fields for contexts other than the default context. Getting the flow hash fields for RSS context 1: $ sudo ethtool -u eth1 rx-flow-hash tcp4 context 1 For RSS context 1: TCP over IPV4 flows use these fields for computing Hash flow key: IP DA Now, setting the flash hash fields to a custom value: $ sudo ethtool -U eth1 rx-flow-hash tcp4 sdfn context 1 And retrieving them again: $ sudo ethtool -u eth1 rx-flow-hash tcp4 context 1 For RSS context 1: TCP over IPV4 flows use these fields for computing Hash flow key: IP SA IP DA L4 bytes 0 & 1 [TCP/UDP src port] L4 bytes 2 & 3 [TCP/UDP dst port] Signed-off-by:
Joe Damato <jdamato@fastly.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
-
Joe Damato authored
ETHTOOL_GRXFH correctly copies in the full struct ethtool_rxnfc when FLOW_RSS is set; ETHTOOL_SRXFH needs a similar code path to handle the FLOW_RSS case so that ethtool can set the flow hash for custom RSS contexts (if supported by the driver). The copy code from ETHTOOL_GRXFH has been pulled out in to a helper so that it can be called in both ETHTOOL_{G,S}RXFH code paths. Acked-by: -
Marc Kleine-Budde authored
Marc Kleine-Budde <mkl@pengutronix.de> says: Traditionally USB drivers used netif_rx to pass the received CAN frames/skbs to the network stack. In netif_rx() the skbs are queued to the local CPU. If IRQs are handled in round robin, CAN frames may be delivered out-of-order to user space. To support devices without timestamping the TX path of the rx-offload helper is cleaned up and extended: - rename rx_offload_get_echo_skb() -> can_rx_offload_get_echo_skb_queue_timestamp() - add can_rx_offload_get_echo_skb_queue_tail() The last patch converts the gs_usb driver to NAPI with the rx-offload helper. Link: https://lore.kernel.org/all/20230718-gs_usb-rx-offload-v2-0-716e542d14d5@pengutronix.deSigned-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Marc Kleine-Budde authored
The driver used to pass received CAN frames/skbs to the network stack with netif_rx(). In netif_rx() the skbs are queued to the local CPU. If IRQs are handled in round robin, OoO packets may occur. To avoid out-of-order reception convert the driver from netif_rx() to NAPI. For USB devices with timestamping support use the rx-offload helper can_rx_offload_queue_timestamp() for the RX, and can_rx_offload_get_echo_skb_queue_timestamp() for the TX path. Devices without timestamping support use can_rx_offload_queue_tail() for RX, and can_rx_offload_get_echo_skb_queue_tail() for the TX path. Link: https://lore.kernel.org/all/559D628C.5020100@hartkopp.net Link: https://github.com/candle-usb/candleLight_fw/issues/166 Link: https://lore.kernel.org/all/20230718-gs_usb-rx-offload-v2-3-716e542d14d5@pengutronix.deSigned-off-by:
-
Marc Kleine-Budde authored
Add can_rx_offload_get_echo_skb_queue_tail(). This function addds the echo skb at the end of rx-offload the queue. This is intended for devices without timestamp support. Link: https://lore.kernel.org/all/20230718-gs_usb-rx-offload-v2-2-716e542d14d5@pengutronix.deSigned-off-by:
-
Marc Kleine-Budde authored
Rename the rx_offload_get_echo_skb() function to can_rx_offload_get_echo_skb_queue_timestamp(), since it inserts the echo skb into the rx-offload queue sorted by timestamp. This is a preparation for adding can_rx_offload_get_echo_skb_queue_tail(), which adds the echo skb to the end of the queue. This is intended for devices that do not support timestamps. Link: https://lore.kernel.org/all/20230718-gs_usb-rx-offload-v2-1-716e542d14d5@pengutronix.deSigned-off-by:
-
Marc Kleine-Budde authored
Marc Kleine-Budde <mkl@pengutronix.de> says: This is a cleanup series of the gs_usb driver. Align the driver more to the kernel coding style, make use of locally defined variables, clean up printouts in various error paths, remove some not needed usb_kill_anchored_urbs() from the shut down paths. Link: https://lore.kernel.org/all/20230718-gs_usb-cleanups-v1-0-c3b9154ec605@pengutronix.deSigned-off-by:
-
