- 20 Jul, 2012 40 commits
-
-
Dan Williams authored
commit 198439e4 [SCSI] libsas: do not set res = 0 in sas_ex_discover_dev() commit 19252de6 [SCSI] libsas: fix wide port hotplug issues The above commits seem to have confused the return value of sas_ex_discover_dev which is non-zero on failure and sas_ex_join_wide_port which just indicates short circuiting discovery on already established ports. The result is random discovery failures depending on configuration. Calls to sas_ex_join_wide_port are the source of the trouble as its return value is errantly assigned to 'res'. Convert it to bool and stop returning its result up the stack. Cc: <stable@vger.kernel.org> Tested-by:
Dan Melnic <dan.melnic@amd.com> Reported-by:
Dan Williams <dan.j.williams@intel.com> Reviewed-by:
Jack Wang <jack_wang@usish.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Dan Williams authored
Continue running revalidation until no more broadcast devices are discovered. Fixes cases where re-discovery completes too early in a domain with multiple expanders with pending re-discovery events. Servicing BCNs can get backed up behind error recovery. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jeff Skirvin authored
The discovery function "sas_rediscover_dev" had two bugs: 1) it did not pay attention to the return status from the SMP task execution; 2) the stack variable used for the returned SAS address was compared against 0 without being initialized. Signed-off-by:
Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by:
-
Dan Williams authored
...now that the strategy handlers guarantee eh context and notify the driver of bus reset. Signed-off-by:
-
Dan Williams authored
sas_eh_bus_reset_handler() amounts to sas_phy_reset() without notification of the reset to the lldd. If this is triggered from eh-cmnd recovery there may be sas_tasks for the lldd to terminate, so ->lldd_I_T_nexus_reset is warranted. Cc: Xiangliang Yu <yuxiangl@marvell.com> Cc: Luben Tuikov <ltuikov@yahoo.com> Cc: Jack Wang <jack_wang@usish.com> Reviewed-by:
Jacek Danecki <jacek.danecki@intel.com> [jacek: modify pm8001_I_T_nexus_reset to return -ENODEV] Signed-off-by:
-
Dan Williams authored
When recovering failed eh-cmnds let the lldd attempt an abort via scsi_abort_eh_cmnd before escalating. Reviewed-by:
-
Dan Williams authored
The strategy handlers may be called in places that are problematic for libsas (i.e. sata resets outside of domain revalidation filtering / libata link recovery), or problematic for userspace (non-blocking ioctl to sleeping reset functions). However, these routines are also called for eh escalations and recovery of scsi_eh_prep_cmnd(), so permit them as long as we are running in the host's error handler, otherwise arrange for them to be triggered in eh_context. Signed-off-by:
-
Dan Williams authored
A quick reading of scsi_error_handler() one could come away with the impression that it does its wakeup event check while the task state is TASK_RUNNING. In fact it sets TASK_INTERRUPTIBLE at the bottom of the loop, but that is ~50 lines down. Just set TASK_INTERRUPTIBLE at the top of loop and be done. Signed-off-by:
-
Maciej Trela authored
eh is woken up automatically by the presence of failed commands, scsi_schedule_eh is reserved for cases where there are no failed commands. This guarantees that host_eh_sceduled is only incremented when an explicit eh request is made. Reviewed-by:
Maciej Trela <maciej.trela@intel.com> [fixed spurious delete of sas_ata_task_abort] Signed-off-by:
Artur Wojcik <artur.wojcik@intel.com> Signed-off-by:
-
Dan Williams authored
Rapid ata hotplug on a libsas controller results in cases where libsas is waiting indefinitely on eh to perform an ata probe. A race exists between scsi_schedule_eh() and scsi_restart_operations() in the case when scsi_restart_operations() issues i/o to other devices in the sas domain. When this happens the host state transitions from SHOST_RECOVERY (set by scsi_schedule_eh) back to SHOST_RUNNING and ->host_busy is non-zero so we put the eh thread to sleep even though ->host_eh_scheduled is active. Before putting the error handler to sleep we need to check if the host_state needs to return to SHOST_RECOVERY for another trip through eh. Since i/o that is released by scsi_restart_operations has been blocked for at least one eh cycle, this implementation allows those i/o's to run before another eh cycle starts to discourage hung task timeouts. Cc: <stable@vger.kernel.org> Reported-by:
Tom Jackson <thomas.p.jackson@intel.com> Tested-by:
-
Dan Williams authored
When managing shost->host_eh_scheduled libata assumes that there is a 1:1 shost-to-ata_port relationship. libsas creates a 1:N relationship so it needs to manage host_eh_scheduled cumulatively at the host level. The sched_eh and end_eh port port ops allow libsas to track when domain devices enter/leave the "eh-pending" state under ha->lock (previously named ha->state_lock, but it is no longer just a lock for ha->state changes). Since host_eh_scheduled indicates eh without backing commands pinning the device it can be deallocated at any time. Move the taking of the domain_device reference under the port_lock to guarantee that the ata_port stays around for the duration of eh. Reviewed-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
-
Dan Williams authored
The following crash results from cases where the end_device has been removed before scsi_sysfs_add_sdev has had a chance to run. BUG: unable to handle kernel NULL pointer dereference at 0000000000000098 IP: [<ffffffff8115e100>] sysfs_create_dir+0x32/0xb6 ... Call Trace: [<ffffffff8125e4a8>] kobject_add_internal+0x120/0x1e3 [<ffffffff81075149>] ? trace_hardirqs_on+0xd/0xf [<ffffffff8125e641>] kobject_add_varg+0x41/0x50 [<ffffffff8125e70b>] kobject_add+0x64/0x66 [<ffffffff8131122b>] device_add+0x12d/0x63a [<ffffffff814b65ea>] ? _raw_spin_unlock_irqrestore+0x47/0x56 [<ffffffff8107de15>] ? module_refcount+0x89/0xa0 [<ffffffff8132f348>] scsi_sysfs_add_sdev+0x4e/0x28a [<ffffffff8132dcbb>] do_scan_async+0x9c/0x145 ...teach scsi_sysfs_add_devices() to check for deleted devices() before trying to add them, and teach scsi_remove_target() how to remove targets that have not been added via device_add(). Cc: <stable@vger.kernel.org> Reported-by:
Dariusz Majchrzak <dariusz.majchrzak@intel.com> Signed-off-by:
-
Ben Collins authored
This may not fix all endian issues in this driver, but it does get the driver working on PowerPC for a PMC SRC card. So it should at least fix all the problems in the core and in the SRC support. [jejb: fix >> 32 breakage reported by Fengguang Wu] Signed-off-by:
Ben Collins <bcollins@ubuntu.com> Acked-by:
Achim Leubner <Achim_Leubner@pmc-sierra.com> Signed-off-by:
-
Ben Collins authored
The loop that waited for syncronous fib commands was causing a CPU stall when a timeout actually occured. 1) Switch to using a more accurate timeout mechanism. 2) Do not pace the loop with udelay(). Use cpu_relax() to allow for scheduling to occur. Signed-off-by:
-
Ben Collins authored
When an error occured that would shut down the driver, some in-flight events were getting caught up, deadlocking a CPU or two. Signed-off-by:
-
Ben Collins authored
This also stops using the "legacy crap" in Scsi_Host (shost->base is an unsigned long). This affected 32-bit systems that have 64-bit resource sizes, causing the IO address to be truncated. Signed-off-by:
-
Mike Snitzer authored
Introduce scsi_dh_attached_handler_name() to retrieve the name of the scsi_dh that is attached to the scsi_device associated with the provided request queue. Returns NULL if a scsi_dh is not attached. Also, fix scsi_dh_{attach,detach} function header comments to document @q rather than @sdev. Signed-off-by:Mike Snitzer <snitzer@redhat.com> Tested-by:
Babu Moger <babu.moger@netapp.com> Reviewed-by:
Chandra Seetharaman <sekharan@us.ibm.com> Acked-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Karen Xie authored
Fixed the parentheses so the tcp push bit would be sent properly. Signed-off-by:
Karen Xie <kxie@chelsio.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Bart Van Assche authored
Avoid that the code for requeueing SCSI requests triggers a crash by making sure that that code isn't scheduled anymore after a device has been removed. Also, source code inspection of __scsi_remove_device() revealed a race condition in this function: no new SCSI requests must be accepted for a SCSI device after device removal started. Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Bart Van Assche authored
The return value of scsi_queue_insert() is ignored by all its callers, hence change the return type of this function into void. Signed-off-by:
-
Bart Van Assche authored
When we call scsi_unprep_request() the command associated with the request gets destroyed and therefore drops its reference on the device. If this was the only reference, the device may get released and we end up with a NULL pointer deref when we call blk_requeue_request. Reported-by:
-
Bart Van Assche authored
Use blk_queue_dead() to test whether the queue is dead instead of !sdev. Since scsi_prep_fn() may be invoked concurrently with __scsi_remove_device(), keep the queuedata (sdev) pointer in __scsi_remove_device(). This patch fixes a kernel oops that can be triggered by USB device removal. See also http://www.spinics.net/lists/linux-scsi/msg56254.html. Other changes included in this patch: - Swap the blk_cleanup_queue() and kfree() calls in scsi_host_dev_release() to make that code easier to grasp. - Remove the queue dead check from scsi_run_queue() since the queue state can change anyway at any point in that function where the queue lock is not held. - Remove the queue dead check from the start of scsi_request_fn() since it is redundant with the scsi_device_online() check. Reported-by:
Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by:
-
Muthukumar Ratty authored
If the queue is dead blk_execute_rq_nowait() doesn't invoke the done() callback function. That will result in blk_execute_rq() being stuck in wait_for_completion(). Avoid this by initializing rq->end_io to the done() callback before we check the queue state. Also, make sure the queue lock is held around the invocation of the done() callback. Found this through source code review. Signed-off-by:
Muthukumar Ratty <muthur@gmail.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Dan Carpenter authored
We took this lock with spin_lock() so we should unlock it with spin_unlock() instead of spin_unlock_irq(). This was introduced in f2c8dc40 "[SCSI] megaraid_mbox: remove scsi_assign_lock usage". Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Adam Radford <aradford@gmail.com> Signed-off-by:
-
Dan Carpenter authored
On 64 bit systems the current code sets 32 bits of "seg" and leaves the other 32 uninitialized. It doesn't matter since the variable is never used. But it's still messy and we should fix it. Signed-off-by:
-
Dan Carpenter authored
If bfad_thread_workq(bfad) was not BFA_STATUS_OK then we freed "im" and then dereferenced it. I did a little clean up because it seemed nicer to return directly instead of doing a superfluous goto. I looked at other functions in this file and it seems like returning directly is standard. Signed-off-by:
Krishna Gudipati <kgudipat@brocade.com> Signed-off-by:
-
Dan Carpenter authored
If mc == BFI_MC_MAX then we're reading past the end of the mod->mbhdlr[] array. Signed-off-by:
-
Josh Hunt authored
Initialize atomic_t scsi_host_next_hn and ioerr_cntas per the guidelines defined in Documentation/atomic_ops.txt Signed-off-by:
Josh Hunt <johunt@akamai.com> Signed-off-by:
-
Bart Van Assche authored
A quote from SPC-4: "While in the unavailable primary target port asymmetric access state, the device server shall support those of the following commands that it supports while in the active/optimized state: [ ... ] d) SET TARGET PORT GROUPS; [ ... ]". Hence re-enable sending STPG to a target port group that is in the unavailable state. Signed-off-by:
-
Vikas Chaudhary authored
Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by:
-
Vikas Chaudhary authored
Signed-off-by:
-
Vikas Chaudhary authored
Fix following message:- drivers/scsi/qla4xxx/ql4_os.c:3266:5: error: symbol 'qla4xxx_post_aen_work' redeclared with different type (originally declared at drivers/scsi/qla4xxx/ql4_glbl.h:186) - incompatible argument 2 (different signedness) Signed-off-by:
-
Vikas Chaudhary authored
Allow multi-session to target (for flash ddbs) accesible via multiple network portal Signed-off-by:
-
Rob Evers authored
Currently the backoff algorithm for when to retry alua rtpg requests progresses geometrically as so: 2, 4, 8, 16, 32, 64... seconds. This progression can lead to un-needed delay in retrying alua rtpg requests when the rtpgs are delayed. A less aggressive backoff algorithm that is additive would not lead to such large jumps when delays start getting long, but would backoff linearly: 2, 4, 6, 8, 10... seconds. Signed-off-by:
Martin George <marting@netapp.com> Signed-off-by:
Rob Evers <revers@redhat.com> Reviewed-by:
-
Rob Evers authored
Some storage arrays are known to return 'illegal request' when an rtpg extended header request is made. T10 says the array should ignore the bit, and return the non-extended rtpg as the array doesn't support the request. Working around this by retrying the rtpg request without the extended header bit set when the extended rtpg request results in illegal request. Signed-off-by:
-
Rob Evers authored
During alua transitions, an array can return transitioning status in response to rtpg requests. These requests get retried for a maximum of 60 seconds by default before timing out. Sometimes this timeout isn't sufficient to allow the array to complete the transition. T10-spc4 addresses this under 'Report Target Port Groups' command. This update retrieves the timeout value from the storage array if available and retries the transitioning rtpgs for up to the 'implied transitioning timeout' value Signed-off-by:
-
Dan Carpenter authored
ARCMSR_ARC1880_DiagWrite_ENABLE is 0x00000080 so (x | 0x00000080) is never zero. The intent here was to test that loop until ARCMSR_ARC1880_DiagWrite_ENABLE was turned on, but because the test was wrong, we would do five loops regardless of whether it succeed or not. Also I simplified the condition a little by removing the unused assignement. Signed-off-by:
Nick Cheng <nick.cheng@areca.com.tw> Signed-off-by:
-
HighPoint Linux Team authored
As the limitation of RR312x's dma engine, the HBA can not access host memory over 12GB. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=14311 [alan: resurrected bug from 2009 and pushed upstream] Reported-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
HighPoint Linux Team <linux@highpoint-tech.com> Signed-off-by:
-
James Smart authored
Signed-off-by:
Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by:
James Smart <james.smart@emulex.com> Signed-off-by:
-
James Smart authored
Signed-off-by:
-
