In the current implement when comparing two flow keys, we will return
result after comparing the whole key from start to end.

In our optimization, we will return result in the first none-zero
comparison, then we will improve the flow table looking up efficiency.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After probe/bind sequence is the PHY in active state, even if interface
is stopped. As result, on some systems like Samsung Exynos5250 SoC based Arndale
board, the ASIX PHY will be able to negotiate the link but fail to
transmit the data.

To handle it, suspend the PHY on probe.

Fixes: e532a096 ("net: usb: asix: ax88772: add phylib support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking updates from Jakub Kicinski:
 "Core:

   - BPF:
      - add syscall program type and libbpf support for generating
        instructions and bindings for in-kernel BPF loaders (BPF loaders
        for BPF), this is a stepping stone for signed BPF programs
      - infrastructure to migrate TCP child sockets from one listener to
        another in the same reuseport group/map to improve flexibility
        of service hand-off/restart
      - add broadcast support to XDP redirect

   - allow bypass of the lockless qdisc to improving performance (for
     pktgen: +23% with one thread, +44% with 2 threads)

   - add a simpler version of "DO_ONCE()" which does not require jump
     labels, intended for slow-path usage

   - virtio/vsock: introduce SOCK_SEQPACKET support

   - add getsocketopt to retrieve netns cookie

   - ip: treat lowest address of a IPv4 subnet as ordinary unicast
     address allowing reclaiming of precious IPv4 addresses

   - ipv6: use prandom_u32() for ID generation

   - ip: add support for more flexible field selection for hashing
     across multi-path routes (w/ offload to mlxsw)

   - icmp: add support for extended RFC 8335 PROBE (ping)

   - seg6: add support for SRv6 End.DT46 behavior

   - mptcp:
      - DSS checksum support (RFC 8684) to detect middlebox meddling
      - support Connection-time 'C' flag
      - time stamping support

   - sctp: packetization Layer Path MTU Discovery (RFC 8899)

   - xfrm: speed up state addition with seq set

   - WiFi:
      - hidden AP discovery on 6 GHz and other HE 6 GHz improvements
      - aggregation handling improvements for some drivers
      - minstrel improvements for no-ack frames
      - deferred rate control for TXQs to improve reaction times
      - switch from round robin to virtual time-based airtime scheduler

   - add trace points:
      - tcp checksum errors
      - openvswitch - action execution, upcalls
      - socket errors via sk_error_report

  Device APIs:

   - devlink: add rate API for hierarchical control of max egress rate
     of virtual devices (VFs, SFs etc.)

   - don't require RCU read lock to be held around BPF hooks in NAPI
     context

   - page_pool: generic buffer recycling

  New hardware/drivers:

   - mobile:
      - iosm: PCIe Driver for Intel M.2 Modem
      - support for Qualcomm MSM8998 (ipa)

   - WiFi: Qualcomm QCN9074 and WCN6855 PCI devices

   - sparx5: Microchip SparX-5 family of Enterprise Ethernet switches

   - Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)

   - NXP SJA1110 Automotive Ethernet 10-port switch

   - Qualcomm QCA8327 switch support (qca8k)

   - Mikrotik 10/25G NIC (atl1c)

  Driver changes:

   - ACPI support for some MDIO, MAC and PHY devices from Marvell and
     NXP (our first foray into MAC/PHY description via ACPI)

   - HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx

   - Mellanox/Nvidia NIC (mlx5)
      - NIC VF offload of L2 bridging
      - support IRQ distribution to Sub-functions

   - Marvell (prestera):
      - add flower and match all
      - devlink trap
      - link aggregation

   - Netronome (nfp): connection tracking offload

   - Intel 1GE (igc): add AF_XDP support

   - Marvell DPU (octeontx2): ingress ratelimit offload

   - Google vNIC (gve): new ring/descriptor format support

   - Qualcomm mobile (rmnet & ipa): inline checksum offload support

   - MediaTek WiFi (mt76)
      - mt7915 MSI support
      - mt7915 Tx status reporting
      - mt7915 thermal sensors support
      - mt7921 decapsulation offload
      - mt7921 enable runtime pm and deep sleep

   - Realtek WiFi (rtw88)
      - beacon filter support
      - Tx antenna path diversity support
      - firmware crash information via devcoredump

   - Qualcomm WiFi (wcn36xx)
      - Wake-on-WLAN support with magic packets and GTK rekeying

   - Micrel PHY (ksz886x/ksz8081): add cable test support"

* tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits)
  tcp: change ICSK_CA_PRIV_SIZE definition
  tcp_yeah: check struct yeah size at compile time
  gve: DQO: Fix off by one in gve_rx_dqo()
  stmmac: intel: set PCI_D3hot in suspend
  stmmac: intel: Enable PHY WOL option in EHL
  net: stmmac: option to enable PHY WOL with PMT enabled
  net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del}
  net: use netdev_info in ndo_dflt_fdb_{add,del}
  ptp: Set lookup cookie when creating a PTP PPS source.
  net: sock: add trace for socket errors
  net: sock: introduce sk_error_report
  net: dsa: replay the local bridge FDB entries pointing to the bridge dev too
  net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev
  net: dsa: include fdb entries pointing to bridge in the host fdb list
  net: dsa: include bridge addresses which are local in the host fdb list
  net: dsa: sync static FDB entries on foreign interfaces to hardware
  net: dsa: install the host MDB and FDB entries in the master's RX filter
  net: dsa: reference count the FDB addresses at the cross-chip notifier level
  net: dsa: introduce a separate cross-chip notifier type for host FDBs
  net: dsa: reference count the MDB entries at the cross-chip notifier level
  ...

Pull scheduler fixes from Ingo Molnar:

 - Fix a small inconsistency (bug) in load tracking, caught by a new
   warning that several people reported.

 - Flip CONFIG_SCHED_CORE to default-disabled, and update the Kconfig
   help text.

* tag 'sched-urgent-2021-06-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/core: Disable CONFIG_SCHED_CORE by default
  sched/fair: Ensure _sum and _avg values stay consistent

Pull microblaze updates from Michal Simek:

 - Remove unused PAGE_UP/DOWN macros

 - Fix trivial spelling mistake

* tag 'microblaze-v5.14' of git://git.monstr.eu/linux-2.6-microblaze:
  arch: microblaze: Fix spelling mistake "vesion" -> "version"
  microblaze: Cleanup unused functions

Pull SafeSetID update from Micah Morton:
 "One very minor code cleanup change that marks a variable as
  __initdata"

* tag 'safesetid-5.14' of git://github.com/micah-morton/linux:
  LSM: SafeSetID: Mark safesetid_initialized as __initdata

Pull smack updates from Casey Schaufler:
 "There is nothing more significant than an improvement to a byte count
  check in smackfs.

  All changes have been in next for weeks"

* tag 'Smack-for-5.14' of git://github.com/cschaufler/smack-next:
  Smack: fix doc warning
  Revert "Smack: Handle io_uring kernel thread privileges"
  smackfs: restrict bytes count in smk_set_cipso()
  security/smack/: fix misspellings using codespell tool

Pull audit updates from Paul Moore:
 "Another merge window, another small audit pull request.

  Four patches in total: one is cosmetic, one removes an unnecessary
  initialization, one renames some enum values to prevent name
  collisions, and one converts list_del()/list_add() to list_move().

  None of these are earth shattering and all pass the audit-testsuite
  tests while merging cleanly on top of your tree from earlier today"

* tag 'audit-pr-20210629' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: remove unnecessary 'ret' initialization
  audit: remove trailing spaces and tabs
  audit: Use list_move instead of list_del/list_add
  audit: Rename enum audit_state constants to avoid AUDIT_DISABLED redefinition
  audit: add blank line after variable declarations

Pull SELinux updates from Paul Moore:

 - The slow_avc_audit() function is now non-blocking so we can remove
   the AVC_NONBLOCKING tricks; this also includes the 'flags' variant of
   avc_has_perm().

 - Use kmemdup() instead of kcalloc()+copy when copying parts of the
   SELinux policydb.

 - The InfiniBand device name is now passed by reference when possible
   in the SELinux code, removing a strncpy().

 - Minor cleanups including: constification of avtab function args,
   removal of useless LSM/XFRM function args, SELinux kdoc fixes, and
   removal of redundant assignments.

* tag 'selinux-pr-20210629' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: kill 'flags' argument in avc_has_perm_flags() and avc_audit()
  selinux: slow_avc_audit has become non-blocking
  selinux: Fix kernel-doc
  selinux: use __GFP_NOWARN with GFP_NOWAIT in the AVC
  lsm_audit,selinux: pass IB device name by reference
  selinux: Remove redundant assignment to rc
  selinux: Corrected comment to match kernel-doc comment
  selinux: delete selinux_xfrm_policy_lookup() useless argument
  selinux: constify some avtab function arguments
  selinux: simplify duplicate_policydb_cond_list() by using kmemdup()

Pull clang feature updates from Kees Cook:

 - Add CC_HAS_NO_PROFILE_FN_ATTR in preparation for PGO support in the
   face of the noinstr attribute, paving the way for PGO and fixing
   GCOV. (Nick Desaulniers)

 - x86_64 LTO coverage is expanded to 32-bit x86. (Nathan Chancellor)

 - Small fixes to CFI. (Mark Rutland, Nathan Chancellor)

* tag 'clang-features-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  qemu_fw_cfg: Make fw_cfg_rev_attr a proper kobj_attribute
  Kconfig: Introduce ARCH_WANTS_NO_INSTR and CC_HAS_NO_PROFILE_FN_ATTR
  compiler_attributes.h: cleanups for GCC 4.9+
  compiler_attributes.h: define __no_profile, add to noinstr
  x86, lto: Enable Clang LTO for 32-bit as well
  CFI: Move function_nocfi() into compiler.h
  MAINTAINERS: Add Clang CFI section

Pull block driver updates from Jens Axboe:
 "Pretty calm round, mostly just NVMe and a bit of MD:

   - NVMe updates (via Christoph)
        - improve the APST configuration algorithm (Alexey Bogoslavsky)
        - look for StorageD3Enable on companion ACPI device
          (Mario Limonciello)
        - allow selecting the network interface for TCP connections
          (Martin Belanger)
        - misc cleanups (Amit Engel, Chaitanya Kulkarni, Colin Ian King,
          Christoph)
        - move the ACPI StorageD3 code to drivers/acpi/ and add quirks
          for certain AMD CPUs (Mario Limonciello)
        - zoned device support for nvmet (Chaitanya Kulkarni)
        - fix the rules for changing the serial number in nvmet
          (Noam Gottlieb)
        - various small fixes and cleanups (Dan Carpenter, JK Kim,
          Chaitanya Kulkarni, Hannes Reinecke, Wesley Sheng, Geert
          Uytterhoeven, Daniel Wagner)

   - MD updates (Via Song)
        - iostats rewrite (Guoqing Jiang)
        - raid5 lock contention optimization (Gal Ofri)

   - Fall through warning fix (Gustavo)

   - Misc fixes (Gustavo, Jiapeng)"

* tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block: (78 commits)
  nvmet: use NVMET_MAX_NAMESPACES to set nn value
  loop: Fix missing discard support when using LOOP_CONFIGURE
  nvme.h: add missing nvme_lba_range_type endianness annotations
  nvme: remove zeroout memset call for struct
  nvme-pci: remove zeroout memset call for struct
  nvmet: remove zeroout memset call for struct
  nvmet: add ZBD over ZNS backend support
  nvmet: add Command Set Identifier support
  nvmet: add nvmet_req_bio put helper for backends
  nvmet: add req cns error complete helper
  block: export blk_next_bio()
  nvmet: remove local variable
  nvmet: use nvme status value directly
  nvmet: use u32 type for the local variable nsid
  nvmet: use u32 for nvmet_subsys max_nsid
  nvmet: use req->cmd directly in file-ns fast path
  nvmet: use req->cmd directly in bdev-ns fast path
  nvmet: make ver stable once connection established
  nvmet: allow mn change if subsys not discovered
  nvmet: make sn stable once connection was established
  ...

Pull core block updates from Jens Axboe:

 - disk events cleanup (Christoph)

 - gendisk and request queue allocation simplifications (Christoph)

 - bdev_disk_changed cleanups (Christoph)

 - IO priority improvements (Bart)

 - Chained bio completion trace fix (Edward)

 - blk-wbt fixes (Jan)

 - blk-wbt enable/disable fix (Zhang)

 - Scheduler dispatch improvements (Jan, Ming)

 - Shared tagset scheduler improvements (John)

 - BFQ updates (Paolo, Luca, Pietro)

 - BFQ lock inversion fix (Jan)

 - Documentation improvements (Kir)

 - CLONE_IO block cgroup fix (Tejun)

 - Remove of ancient and deprecated block dump feature (zhangyi)

 - Discard merge fix (Ming)

 - Misc fixes or followup fixes (Colin, Damien, Dan, Long, Max, Thomas,
   Yang)

* tag 'for-5.14/block-2021-06-29' of git://git.kernel.dk/linux-block: (129 commits)
  block: fix discard request merge
  block/mq-deadline: Remove a WARN_ON_ONCE() call
  blk-mq: update hctx->dispatch_busy in case of real scheduler
  blk: Fix lock inversion between ioc lock and bfqd lock
  bfq: Remove merged request already in bfq_requests_merged()
  block: pass a gendisk to bdev_disk_changed
  block: move bdev_disk_changed
  block: add the events* attributes to disk_attrs
  block: move the disk events code to a separate file
  block: fix trace completion for chained bio
  block/partitions/msdos: Fix typo inidicator -> indicator
  block, bfq: reset waker pointer with shared queues
  block, bfq: check waker only for queues with no in-flight I/O
  block, bfq: avoid delayed merge of async queues
  block, bfq: boost throughput by extending queue-merging times
  block, bfq: consider also creation time in delayed stable merge
  block, bfq: fix delayed stable merge check
  block, bfq: let also stably merged queues enjoy weight raising
  blk-wbt: make sure throttle is enabled properly
  blk-wbt: introduce a new disable state to prevent false positive by rwb_enabled()
  ...

Pull HID updates from Jiri Kosina:

 - patch series that ensures that hid-multitouch driver disables touch
   and button-press reporting on hid-mt devices during suspend when the
   device is not configured as a wakeup-source, from Hans de Goede

 - support for ISH DMA on Intel EHL platform, from Even Xu

 - support for Renoir and Cezanne SoCs, Ambient Light Sensor and Human
   Presence Detection sensor for amd-sfh driver, from Basavaraj Natikar

 - other assorted code cleanups and device-specific fixes/quirks

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (45 commits)
  HID: thrustmaster: Switch to kmemdup() when allocate change_request
  HID: multitouch: Disable event reporting on suspend when the device is not a wakeup-source
  HID: logitech-dj: Implement may_wakeup ll-driver callback
  HID: usbhid: Implement may_wakeup ll-driver callback
  HID: core: Add hid_hw_may_wakeup() function
  HID: input: Add support for Programmable Buttons
  HID: wacom: Correct base usage for capacitive ExpressKey status bits
  HID: amd_sfh: Add initial support for HPD sensor
  HID: amd_sfh: Extend ALS support for newer AMD platform
  HID: amd_sfh: Extend driver capabilities for multi-generation support
  HID: surface-hid: Fix get-report request
  HID: sony: fix freeze when inserting ghlive ps3/wii dongles
  HID: usbkbd: Avoid GFP_ATOMIC when GFP_KERNEL is possible
  HID: amd_sfh: change in maintainer
  HID: intel-ish-hid: ipc: Specify that EHL no cache snooping
  HID: intel-ish-hid: ishtp: Add dma_no_cache_snooping() callback
  HID: intel-ish-hid: Set ISH driver depends on x86
  HID: hid-input: add Surface Go battery quirk
  HID: intel-ish-hid: Fix minor typos in comments
  HID: usbmouse: Avoid GFP_ATOMIC when GFP_KERNEL is possible
  ...

Pull EDAC updates from Tony Luck:
 "Various fixes and support for new CPUs:

   - Clean up error messages from thunderx_edac

   - Add MODULE_DEVICE_TABLE to ti_edac so it will autoload

   - Use %pR to print resources in aspeed_edac

   - Add Yazen Ghannam as MAINTAINER for AMD edac drivers

   - Fix Ice Lake and Sapphire Rapids drivers to report correct "near"
     or "far" device for errors in 2LM configurations

   - Add support of on package high bandwidth memory in Sapphire Rapids

   - New CPU support for three CPUs supporting in-band ECC (IOT SKUs for
     ICL-NNPI, Tiger Lake and Alder Lake)

   - Don't even try to load Intel EDAC drivers when running as a guest

   - Fix Kconfig dependency on X86_MCE_INTEL for EDAC_IGEN6"

* tag 'edac_updates_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/igen6: fix core dependency
  EDAC/Intel: Do not load EDAC driver when running as a guest
  EDAC/igen6: Add Intel Alder Lake SoC support
  EDAC/igen6: Add Intel Tiger Lake SoC support
  EDAC/igen6: Add Intel ICL-NNPI SoC support
  EDAC/i10nm: Add support for high bandwidth memory
  EDAC/i10nm: Add detection of memory levels for ICX/SPR servers
  EDAC/skx_common: Add new ADXL components for 2-level memory
  MAINTAINERS: Make Yazen Ghannam maintainer for EDAC-AMD64
  EDAC/aspeed: Use proper format string for printing resource
  EDAC/ti: Add missing MODULE_DEVICE_TABLE
  EDAC/thunderx: Remove irrelevant variable from error messages

Merge tag 'tpmdd-next-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull tpm driver updates from Jarkko Sakkinen:
 "Bug fixes for TPM"

[ This isn't actually the whole contents of the tag and thus doesn't
  contain Jarkko's signature - I dropped the two top commits that added
  support for signing modules using elliptic curve keys because there's
  a new series for that that fixes a few confising things   - Linus ]

* tag 'tpmdd-next-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: Replace WARN_ONCE() with dev_err_once() in tpm_tis_status()
  tpm_tis: Use DEFINE_RES_MEM() to simplify code
  tpm: fix some doc warnings in tpm1-cmd.c
  tpm_tis_spi: add missing SPI device ID entries
  tpm: add longer timeout for TPM2_CC_VERIFY_SIGNATURE
  char: tpm: move to use request_irq by IRQF_NO_AUTOEN flag
  tpm_tis_spi: set default probe function if device id not match
  tpm_crb: Use IOMEM_ERR_PTR when function returns iomem

Merge tag 'platform-drivers-x86-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates from Hans de Goede:
 "Highlights:

   - New think-lmi driver adding support for changing Lenovo Thinkpad
     BIOS settings from within Linux using the standard firmware-
     attributes class sysfs API

   - MS Surface aggregator-cdev now also supports forwarding events to
     user-space (for debugging / new driver development purposes only)

   - New intel_skl_int3472 driver this provides the necessary glue to
     translate ACPI table information to GPIOs, regulators, etc. for
     camera sensors on Intel devices with IPU3 attached MIPI cameras

   - A whole bunch of other fixes + device-specific quirk additions

   - New devm_work_autocancel() devm-helpers.h function"

* tag 'platform-drivers-x86-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (83 commits)
  platform/x86: dell-wmi-sysman: Change user experience when Admin/System Password is modified
  platform/x86: intel_skl_int3472: Uninitialized variable in skl_int3472_handle_gpio_resources()
  platform/x86: think-lmi: Move kfree(setting->possible_values) to tlmi_attr_setting_release()
  platform/x86: think-lmi: Split current_value to reflect only the value
  platform/x86: think-lmi: Fix issues with duplicate attributes
  platform/x86: think-lmi: Return EINVAL when kbdlang gets set to a 0 length string
  platform/x86: intel_cht_int33fe: Move to its own subfolder
  platform/x86: intel_skl_int3472: Move to intel/ subfolder
  platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_clock()
  platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_regulator()
  platform/x86: intel_skl_int3472: Use ACPI GPIO resource directly
  platform/x86: intel_skl_int3472: Fix dependencies (drop CLKDEV_LOOKUP)
  platform/x86: intel_skl_int3472: Free ACPI device resources after use
  platform/x86: Remove "default n" entries
  platform/x86: ISST: Use numa node id for cpu pci dev mapping
  platform/x86: ISST: Optimize CPU to PCI device mapping
  tools/power/x86/intel-speed-select: v1.10 release
  tools/power/x86/intel-speed-select: Fix uncore memory frequency display
  extcon: extcon-max8997: Simplify driver using devm
  extcon: extcon-max8997: Fix IRQ freeing at error path
  ...

Pull mailbox updates from Jassi Brar:

 - imx: add support for i.MX8ULP

 - mtk: code change around callback struct

 - qcom: add sm6125, MSM8939 fix for channel exhaustion

 - microchip: add support for polarfire controller

 - misc: cosmetic changes to bcm-2835,flexrm,pdc, arm-mhu and hisilicon

* tag 'mailbox-v5.14' of git://git.linaro.org/landing-teams/working/fujitsu/integration: (26 commits)
  MAINTAINERS: add entry for polarfire soc mailbox
  dt-bindings: add bindings for polarfire soc system controller
  mbox: add polarfire soc system controller mailbox
  dt-bindings: add bindings for polarfire soc mailbox
  mailbox: imx: Avoid using val uninitialized in imx_mu_isr()
  mailbox: qcom: Add MSM8939 APCS support
  mailbox: qcom: Use PLATFORM_DEVID_AUTO to register platform device
  dt-bindings: mailbox: qcom: Add MSM8939 APCS compatible
  mailbox: qcom-apcs: Add SM6125 compatible
  dt-bindings: mailbox: Add binding for sm6125
  mailbox: mtk-cmdq: Fix uninitialized variable in cmdq_mbox_flush()
  mailbox: bcm-flexrm-mailbox: Remove redundant dev_err call in flexrm_mbox_probe()
  mailbox: bcm2835: Remove redundant dev_err call in bcm2835_mbox_probe()
  mailbox: qcom-ipcc: Fix IPCC mbox channel exhaustion
  mailbox: mtk-cmdq: Add struct cmdq_pkt in struct cmdq_cb_data
  mailbox: mtk-cmdq: Use mailbox rx_callback
  mailbox: mtk-cmdq: Remove cmdq_cb_status
  mailbox: imx-mailbox: support i.MX8ULP MU
  mailbox: imx: add xSR/xCR register array
  mailbox: imx: replace the xTR/xRR array with single register
  ...

Pull IPMI driver updates from Corey Minyard:
 "Mostly a restructure of the kcs_bmc driver to make it easier to use
  with different types of devices, and just to clean things up and
  improve things.

  Also some bug fixes for the kcs_bmc driver.

  One fix to the IPMI watchdog to stop the timer when the action is
  none. Not a big deal, but it's the right thing to do"

* tag 'for-linus-5.14-1' of git://github.com/cminyard/linux-ipmi:
  ipmi: kcs_bmc_aspeed: Fix less than zero comparison of a unsigned int
  ipmi: kcs_bmc_aspeed: Optionally apply status address
  ipmi: kcs_bmc_aspeed: Fix IBFIE typo from datasheet
  ipmi: kcs_bmc_aspeed: Implement KCS SerIRQ configuration
  dt-bindings: ipmi: Add optional SerIRQ property to ASPEED KCS devices
  dt-bindings: ipmi: Convert ASPEED KCS binding to schema
  ipmi: kcs_bmc: Add serio adaptor
  ipmi: kcs_bmc: Enable IBF on open
  ipmi: kcs_bmc: Allow clients to control KCS IRQ state
  ipmi: kcs_bmc: Decouple the IPMI chardev from the core
  ipmi: kcs_bmc: Strip private client data from struct kcs_bmc
  ipmi: kcs_bmc: Split headers into device and client
  ipmi: kcs_bmc: Turn the driver data-structures inside-out
  ipmi: kcs_bmc: Split out kcs_bmc_cdev_ipmi
  ipmi: kcs_bmc: Rename {read,write}_{status,data}() functions
  ipmi: kcs_bmc: Make status update atomic
  ipmi: kcs_bmc_aspeed: Use of match data to extract KCS properties
  ipmi/watchdog: Stop watchdog timer when the current action is 'none'

Pick up a fix for a warning that several people reported.
Signed-off-by: Ingo Molnar <mingo@kernel.org>

- patch series that ensures that hid-multitouch driver disables touch and
  button-press reporting on hid-mt devices during suspend when the device is
  not configured as a wakeup-source, from Hans de Goede

- support for LCD menu keys + LCD brightness control on the Logitech Z-10
  speakers (with LCD) which use the same protocol as the G15 keyboards
  from Hans de Goede

- support for ISH DMA on EHL platform from Even Xu
- various code style fixes and cleanups from Lee Jones and Uwe Kleine-König

- device tree match for Google Whiskers device from Ikjoon Jang

- device unbinding locking fix from Dmitry Torokhov
- support for programmable buttons (mapping to KEY_MACRO# event codes)
  from Thomas Weißschuh
- various other small fixes and code style improvements

- support for Renoir and Cezanne SoCs
- support for Ambient Light Sensor
- support for Human Presence Detection sensor

all from Basavaraj Natikar

Pull dlm updates from David Teigland:
 "This is a major dlm networking enhancement that adds message
  retransmission so that the dlm can reliably continue operating when
  network connections fail and nodes reconnect.

  Previously, this would result in lost messages which could only be
  handled as a node failure"

* tag 'dlm-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: (26 commits)
  fs: dlm: invalid buffer access in lookup error
  fs: dlm: fix race in mhandle deletion
  fs: dlm: rename socket and app buffer defines
  fs: dlm: introduce proto values
  fs: dlm: move dlm allow conn
  fs: dlm: use alloc_ordered_workqueue
  fs: dlm: fix memory leak when fenced
  fs: dlm: fix lowcomms_start error case
  fs: dlm: Fix spelling mistake "stucked" -> "stuck"
  fs: dlm: Fix memory leak of object mh
  fs: dlm: don't allow half transmitted messages
  fs: dlm: add midcomms debugfs functionality
  fs: dlm: add reliable connection if reconnect
  fs: dlm: add union in dlm header for lockspace id
  fs: dlm: move out some hash functionality
  fs: dlm: add functionality to re-transmit a message
  fs: dlm: make buffer handling per msg
  fs: dlm: add more midcomms hooks
  fs: dlm: public header in out utility
  fs: dlm: fix connection tcp EOF handling
  ...

Pull gfs2 updates from Andreas Gruenbacher:
 "Various minor gfs2 cleanups and fixes"

* tag 'gfs2-v5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Clean up gfs2_unstuff_dinode
  gfs2: Unstuff before locking page in gfs2_page_mkwrite
  gfs2: Clean up the error handling in gfs2_page_mkwrite
  gfs2: Fix error handling in init_statfs
  gfs2: Fix underflow in gfs2_page_mkwrite
  gfs2: Use list_move_tail instead of list_del/list_add_tail
  gfs2: Fix do_gfs2_set_flags description

Pull cifs updates from Steve French:

 - improve fallocate emulation

 - DFS fixes

 - minor multichannel fixes

 - various cleanup patches, many to address Coverity warnings

* tag '5.14-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (38 commits)
  smb3: prevent races updating CurrentMid
  cifs: fix missing spinlock around update to ses->status
  cifs: missing null pointer check in cifs_mount
  smb3: fix possible access to uninitialized pointer to DACL
  cifs: missing null check for newinode pointer
  cifs: remove two cases where rc is set unnecessarily in sid_to_id
  SMB3: Add new info level for query directory
  cifs: fix NULL dereference in smb2_check_message()
  smbdirect: missing rc checks while waiting for rdma events
  cifs: Avoid field over-reading memcpy()
  smb311: remove dead code for non compounded posix query info
  cifs: fix SMB1 error path in cifs_get_file_info_unix
  smb3: fix uninitialized value for port in witness protocol move
  cifs: fix unneeded null check
  cifs: use SPDX-Licence-Identifier
  cifs: convert list_for_each to entry variant in cifs_debug.c
  cifs: convert list_for_each to entry variant in smb2misc.c
  cifs: avoid extra calls in posix_info_parse
  cifs: retry lookup and readdir when EAGAIN is returned.
  cifs: fix check of dfs interlinks
  ...

Merge tag 'fs.openat2.unknown_flags.v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

Pull openat2 fixes from Christian Brauner:

 - Remove the unused VALID_UPGRADE_FLAGS define we carried from an
   extension to openat2() that we haven't merged. Aleksa might be
   getting back to it at some point but just not right now.

 - openat2() used to accidently ignore unknown flag values in the upper
   32 bits.

   The new openat2() syscall verifies that no unknown O-flag values are
   set and returns an error to userspace if they are while the older
   open syscalls like open() and openat() simply ignore unknown flag
   values:

      #define O_FLAG_CURRENTLY_INVALID (1 << 31)
      struct open_how how = {
            .flags = O_RDONLY | O_FLAG_CURRENTLY_INVALID,
            .resolve = 0,
      };

      /* fails */
      fd = openat2(-EBADF, "/dev/null", &how, sizeof(how));

      /* succeeds */
      fd = openat(-EBADF, "/dev/null", O_RDONLY | O_FLAG_CURRENTLY_INVALID);

   However, openat2() silently truncates the upper 32 bits meaning:

      #define O_FLAG_CURRENTLY_INVALID_LOWER32 (1 << 31)
      #define O_FLAG_CURRENTLY_INVALID_UPPER32 (1 << 40)

      struct open_how how_lowe32 = {
            .flags = O_RDONLY | O_FLAG_CURRENTLY_INVALID_LOWER32,
      };

      struct open_how how_upper32 = {
            .flags = O_RDONLY | O_FLAG_CURRENTLY_INVALID_UPPER32,
      };

      /* fails */
      fd = openat2(-EBADF, "/dev/null", &how_lower32, sizeof(how_lower32));

      /* succeeds */
      fd = openat2(-EBADF, "/dev/null", &how_upper32, sizeof(how_upper32));

   Fix this by preventing the immediate truncation in build_open_flags()
   and add a compile-time check to catch when we add flags in the upper
   32 bit range.

* tag 'fs.openat2.unknown_flags.v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  test: add openat2() test for invalid upper 32 bit flag value
  open: don't silently ignore unknown O-flags in openat2()
  fcntl: remove unused VALID_UPGRADE_FLAGS

Merge tag 'fs.mount_setattr.nosymfollow.v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

Pull mount_setattr updates from Christian Brauner:
 "A few releases ago the old mount API gained support for a mount
  options which prevents following symlinks on a given mount. This adds
  support for it in the new mount api through the MOUNT_ATTR_NOSYMFOLLOW
  flag via mount_setattr() and fsmount(). With mount_setattr() that flag
  can even be applied recursively.

  There's an additional ack from Ross Zwisler who originally authored
  the nosymfollow patch. As I've already had the patches in my for-next
  I didn't add his ack explicitly"

* tag 'fs.mount_setattr.nosymfollow.v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  tests: test MOUNT_ATTR_NOSYMFOLLOW with mount_setattr()
  mount: Support "nosymfollow" in new mount api

Merge misc updates from Andrew Morton:
 "191 patches.

  Subsystems affected by this patch series: kthread, ia64, scripts,
  ntfs, squashfs, ocfs2, kernel/watchdog, and mm (gup, pagealloc, slab,
  slub, kmemleak, dax, debug, pagecache, gup, swap, memcg, pagemap,
  mprotect, bootmem, dma, tracing, vmalloc, kasan, initialization,
  pagealloc, and memory-failure)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (191 commits)
  mm,hwpoison: make get_hwpoison_page() call get_any_page()
  mm,hwpoison: send SIGBUS with error virutal address
  mm/page_alloc: split pcp->high across all online CPUs for cpuless nodes
  mm/page_alloc: allow high-order pages to be stored on the per-cpu lists
  mm: replace CONFIG_FLAT_NODE_MEM_MAP with CONFIG_FLATMEM
  mm: replace CONFIG_NEED_MULTIPLE_NODES with CONFIG_NUMA
  docs: remove description of DISCONTIGMEM
  arch, mm: remove stale mentions of DISCONIGMEM
  mm: remove CONFIG_DISCONTIGMEM
  m68k: remove support for DISCONTIGMEM
  arc: remove support for DISCONTIGMEM
  arc: update comment about HIGHMEM implementation
  alpha: remove DISCONTIGMEM and NUMA
  mm/page_alloc: move free_the_page
  mm/page_alloc: fix counting of managed_pages
  mm/page_alloc: improve memmap_pages dbg msg
  mm: drop SECTION_SHIFT in code comments
  mm/page_alloc: introduce vm.percpu_pagelist_high_fraction
  mm/page_alloc: limit the number of pages on PCP lists when reclaim is active
  mm/page_alloc: scale the number of pages that are batch freed
  ...

Trivial conflict in net/netfilter/nf_tables_api.c.

Duplicate fix in tools/testing/selftests/net/devlink_port_split.py
- take the net-next version.

skmsg, and L4 bpf - keep the bpf code but remove the flags
and err params.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull device properties framework updates from Rafael Wysocki:
 "These unify device properties access in some pieces of code and make
  related changes.

  Specifics:

   - Handle device properties with software node API in the ACPI IORT
     table parsing code (Heikki Krogerus).

   - Unify of_node access in the common device properties code, constify
     the acpi_dma_supported() argument pointer and fix up CONFIG_ACPI=n
     stubs of some functions related to device properties (Andy
     Shevchenko)"

* tag 'devprop-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  device property: Unify access to of_node
  ACPI: scan: Constify acpi_dma_supported() helper function
  ACPI: property: Constify stubs for CONFIG_ACPI=n case
  ACPI: IORT: Handle device properties with software node API
  device property: Retrieve fwnode from of_node via accessor

Pull PNP updates from Rafael Wysocki:
 "These get rid of unnecessary local variables and function, reduce code
  duplication and clean up message printing.

  Specifics:

   - Remove unnecessary local variables from isapnp_proc_attach_device()
     (Anupama K Patil).

   - Make the callers of pnp_alloc() use kzalloc() directly and drop the
     former (Heiner Kallweit).

   - Make two pieces of code use dev_dbg() instead of dev_printk() with
     the KERN_DEBUG message level (Heiner Kallweit).

   - Use DEVICE_ATTR_RO() instead of full DEVICE_ATTR() in some places
     in card.c (Zhen Lei).

   - Use list_for_each_entry() instead of list_for_each() in
     insert_device() (Zou Wei)"

* tag 'pnp-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PNP: pnpbios: Use list_for_each_entry() instead of list_for_each()
  PNP: use DEVICE_ATTR_RO macro
  PNP: Switch over to dev_dbg()
  PNP: Remove pnp_alloc()
  drivers: pnp: isapnp: proc.c: Remove unnecessary local variables

Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to the 20210604 upstream
  revision, add preliminary support for the Platform Runtime Mechanism
  (PRM), address issues related to the handling of device dependencies
  in the ACPI device eunmeration code, improve the tracking of ACPI
  power resource states, improve the ACPI support for suspend-to-idle on
  AMD systems, continue the unification of message printing in the ACPI
  code, address assorted issues and clean up the code in a number of
  places.

  Specifics:

   - Update ACPICA code in the kernel to upstrea revision 20210604
     including the following changes:

      - Add defines for the CXL Host Bridge Structureand and add the
        CFMWS structure definition to CEDT (Alison Schofield).
      - iASL: Finish support for the IVRS ACPI table (Bob Moore).
      - iASL: Add support for the SVKL table (Bob Moore).
      - iASL: Add full support for RGRT ACPI table (Bob Moore).
      - iASL: Add support for the BDAT ACPI table (Bob Moore).
      - iASL: add disassembler support for PRMT (Erik Kaneda).
      - Fix memory leak caused by _CID repair function (Erik Kaneda).
      - Add support for PlatformRtMechanism OpRegion (Erik Kaneda).
      - Add PRMT module header to facilitate parsing (Erik Kaneda).
      - Add _PLD panel positions (Fabian Wüthrich).
      - MADT: add Multiprocessor Wakeup Mailbox Structure and the SVKL
        table headers (Kuppuswamy Sathyanarayanan).
      - Use ACPI_FALLTHROUGH (Wei Ming Chen).

   - Add preliminary support for the Platform Runtime Mechanism (PRM) to
     allow the AML interpreter to call PRM functions (Erik Kaneda).

   - Address some issues related to the handling of device dependencies
     reported by _DEP in the ACPI device enumeration code and clean up
     some related pieces of it (Rafael Wysocki).

   - Improve the tracking of states of ACPI power resources (Rafael
     Wysocki).

   - Improve ACPI support for suspend-to-idle on AMD systems (Alex
     Deucher, Mario Limonciello, Pratik Vishwakarma).

   - Continue the unification and cleanup of message printing in the
     ACPI code (Hanjun Guo, Heiner Kallweit).

   - Fix possible buffer overrun issue with the description_show() sysfs
     attribute method (Krzysztof Wilczyński).

   - Improve the acpi_mask_gpe kernel command line parameter handling
     and clean up the core ACPI code related to sysfs (Andy Shevchenko,
     Baokun Li, Clayton Casciato).

   - Postpone bringing devices in the general ACPI PM domain to D0
     during resume from system-wide suspend until they are really needed
     (Dmitry Torokhov).

   - Make the ACPI processor driver fix up C-state latency if not
     ordered (Mario Limonciello).

   - Add support for identifying devices depening on the given one that
     are not its direct descendants with the help of _DEP (Daniel
     Scally).

   - Extend the checks related to ACPI IRQ overrides on x86 in order to
     avoid false-positives (Hui Wang).

   - Add battery DPTF participant for Intel SoCs (Sumeet Pawnikar).

   - Rearrange the ACPI fan driver and device power management code to
     use a common list of device IDs (Rafael Wysocki).

   - Fix clang CFI violation in the ACPI BGRT table parsing code and
     clean it up (Nathan Chancellor).

   - Add GPE-related quirks for some laptops to the EC driver (Chris
     Chiu, Zhang Rui).

   - Make the ACPI PPTT table parsing code populate the cache-id value
     if present in the firmware (James Morse).

   - Remove redundant clearing of context->ret.pointer from
     acpi_run_osc() (Hans de Goede).

   - Add missing acpi_put_table() in acpi_init_fpdt() (Jing Xiangfeng).

   - Make ACPI APEI handle ARM Processor Error CPER records like Memory
     Error ones to avoid user space task lockups (Xiaofei Tan).

   - Stop warning about disabled ACPI in APEI (Jon Hunter).

   - Fix fall-through warning for Clang in the SBSHC driver (Gustavo A.
     R. Silva).

   - Add custom DSDT file as Makefile prerequisite (Richard Fitzgerald).

   - Initialize local variable to avoid garbage being returned (Colin
     Ian King).

   - Simplify assorted pieces of code, address assorted coding style and
     documentation issues and comment typos (Baokun Li, Christophe
     JAILLET, Clayton Casciato, Liu Shixin, Shaokun Zhang, Wei Yongjun,
     Yang Li, Zhen Lei)"

* tag 'acpi-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (97 commits)
  ACPI: PM: postpone bringing devices to D0 unless we need them
  ACPI: tables: Add custom DSDT file as makefile prerequisite
  ACPI: bgrt: Use sysfs_emit
  ACPI: bgrt: Fix CFI violation
  ACPI: EC: trust DSDT GPE for certain HP laptop
  ACPI: scan: Simplify acpi_table_events_fn()
  ACPI: PM: Adjust behavior for field problems on AMD systems
  ACPI: PM: s2idle: Add support for new Microsoft UUID
  ACPI: PM: s2idle: Add support for multiple func mask
  ACPI: PM: s2idle: Refactor common code
  ACPI: PM: s2idle: Use correct revision id
  ACPI: sysfs: Remove tailing return statement in void function
  ACPI: sysfs: Use __ATTR_RO() and __ATTR_RW() macros
  ACPI: sysfs: Sort headers alphabetically
  ACPI: sysfs: Refactor param_get_trace_state() to drop dead code
  ACPI: sysfs: Unify pattern of memory allocations
  ACPI: sysfs: Allow bitmap list to be supplied to acpi_mask_gpe
  ACPI: sysfs: Make sparse happy about address space in use
  ACPI: scan: Fix race related to dropping dependencies
  ACPI: scan: Reorganize acpi_device_add()
  ...

Pull power management updates from Rafael Wysocki:
 "These add hybrid processors support to the intel_pstate driver and
  make it work with more processor models when HWP is disabled, make the
  intel_idle driver use special C6 idle state paremeters when package
  C-states are disabled, add cooling support to the tegra30 devfreq
  driver, rework the TEO (timer events oriented) cpuidle governor,
  extend the OPP (operating performance points) framework to use the
  required-opps DT property in more cases, fix some issues and clean up
  a number of assorted pieces of code.

  Specifics:

   - Make intel_pstate support hybrid processors using abstract
     performance units in the HWP interface (Rafael Wysocki).

   - Add Icelake servers and Cometlake support in no-HWP mode to
     intel_pstate (Giovanni Gherdovich).

   - Make cpufreq_online() error path be consistent with the CPU device
     removal path in cpufreq (Rafael Wysocki).

   - Clean up 3 cpufreq drivers and the statistics code (Hailong Liu,
     Randy Dunlap, Shaokun Zhang).

   - Make intel_idle use special idle state parameters for C6 when
     package C-states are disabled (Chen Yu).

   - Rework the TEO (timer events oriented) cpuidle governor to address
     some theoretical shortcomings in it (Rafael Wysocki).

   - Drop unneeded semicolon from the TEO governor (Wan Jiabing).

   - Modify the runtime PM framework to accept unassigned suspend and
     resume callback pointers (Ulf Hansson).

   - Improve pm_runtime_get_sync() documentation (Krzysztof Kozlowski).

   - Improve device performance states support in the generic power
     domains (genpd) framework (Ulf Hansson).

   - Fix some documentation issues in genpd (Yang Yingliang).

   - Make the operating performance points (OPP) framework use the
     required-opps DT property in use cases that are not related to
     genpd (Hsin-Yi Wang).

   - Make lazy_link_required_opp_table() use list_del_init instead of
     list_del/INIT_LIST_HEAD (Yang Yingliang).

   - Simplify wake IRQs handling in the core system-wide sleep support
     code and clean up some coding style inconsistencies in it (Tian
     Tao, Zhen Lei).

   - Add cooling support to the tegra30 devfreq driver and improve its
     DT bindings (Dmitry Osipenko).

   - Fix some assorted issues in the devfreq core and drivers (Chanwoo
     Choi, Dong Aisheng, YueHaibing)"

* tag 'pm-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits)
  PM / devfreq: passive: Fix get_target_freq when not using required-opp
  cpufreq: Make cpufreq_online() call driver->offline() on errors
  opp: Allow required-opps to be used for non genpd use cases
  cpuidle: teo: remove unneeded semicolon in teo_select()
  dt-bindings: devfreq: tegra30-actmon: Add cooling-cells
  dt-bindings: devfreq: tegra30-actmon: Convert to schema
  PM / devfreq: userspace: Use DEVICE_ATTR_RW macro
  PM: runtime: Clarify documentation when callbacks are unassigned
  PM: runtime: Allow unassigned ->runtime_suspend|resume callbacks
  PM: runtime: Improve path in rpm_idle() when no callback
  PM: hibernate: remove leading spaces before tabs
  PM: sleep: remove trailing spaces and tabs
  PM: domains: Drop/restore performance state votes for devices at runtime PM
  PM: domains: Return early if perf state is already set for the device
  PM: domains: Split code in dev_pm_genpd_set_performance_state()
  cpuidle: teo: Use kerneldoc documentation in admin-guide
  cpuidle: teo: Rework most recent idle duration values treatment
  cpuidle: teo: Change the main idle state selection logic
  cpuidle: teo: Cosmetic modification of teo_select()
  cpuidle: teo: Cosmetic modifications of teo_update()
  ...

fw_cfg_showrev() is called by an indirect call in kobj_attr_show(),
which violates clang's CFI checking because fw_cfg_showrev()'s second
parameter is 'struct attribute', whereas the ->show() member of 'struct
kobj_structure' expects the second parameter to be of type 'struct
kobj_attribute'.

$ cat /sys/firmware/qemu_fw_cfg/rev
3

$ dmesg | grep "CFI failure"
[   26.016832] CFI failure (target: fw_cfg_showrev+0x0/0x8):

Fix this by converting fw_cfg_rev_attr to 'struct kobj_attribute' where
this would have been caught automatically by the incompatible pointer
types compiler warning. Update fw_cfg_showrev() accordingly.

Fixes: 75f3e8e4 ("firmware: introduce sysfs driver for QEMU's fw_cfg device")
Link: https://github.com/ClangBuiltLinux/linux/issues/1299Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210211194258.4137998-1-nathan@kernel.org

Pull x86 entry code related updates from Thomas Gleixner:

 - Consolidate the macros for .byte ... opcode sequences

 - Deduplicate register offset defines in include files

 - Simplify the ia32,x32 compat handling of the related syscall tables
   to get rid of #ifdeffery.

 - Clear all EFLAGS which are not required for syscall handling

 - Consolidate the syscall tables and switch the generation over to the
   generic shell script and remove the CFLAGS tweaks which are not
   longer required.

 - Use 'int' type for system call numbers to match the generic code.

 - Add more selftests for syscalls

* tag 'x86-entry-2021-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/syscalls: Don't adjust CFLAGS for syscall tables
  x86/syscalls: Remove -Wno-override-init for syscall tables
  x86/uml/syscalls: Remove array index from syscall initializers
  x86/syscalls: Clear 'offset' and 'prefix' in case they are set in env
  x86/entry: Use int everywhere for system call numbers
  x86/entry: Treat out of range and gap system calls the same
  x86/entry/64: Sign-extend system calls on entry to int
  selftests/x86/syscall: Add tests under ptrace to syscall_numbering_64
  selftests/x86/syscall: Simplify message reporting in syscall_numbering
  selftests/x86/syscall: Update and extend syscall_numbering_64
  x86/syscalls: Switch to generic syscallhdr.sh
  x86/syscalls: Use __NR_syscalls instead of __NR_syscall_max
  x86/unistd: Define X32_NR_syscalls only for 64-bit kernel
  x86/syscalls: Stop filling syscall arrays with *_sys_ni_syscall
  x86/syscalls: Switch to generic syscalltbl.sh
  x86/entry/x32: Rename __x32_compat_sys_* to __x64_compat_sys_*

Pull x86 interrupt related updates from Thomas Gleixner:

 - Consolidate the VECTOR defines and the usage sites.

 - Cleanup GDT/IDT related code and replace open coded ASM with proper
   native helper functions.

* tag 'x86-irq-2021-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kexec: Set_[gi]dt() -> native_[gi]dt_invalidate() in machine_kexec_*.c
  x86: Add native_[ig]dt_invalidate()
  x86/idt: Remove address argument from idt_invalidate()
  x86/irq: Add and use NR_EXTERNAL_VECTORS and NR_SYSTEM_VECTORS
  x86/irq: Remove unused vectors defines

Pull timer updates from Thomas Gleixner:
 "Time and clocksource/clockevent related updates:

  Core changes:

   - Infrastructure to support per CPU "broadcast" devices for per CPU
     clockevent devices which stop in deep idle states. This allows us
     to utilize the more efficient architected timer on certain ARM SoCs
     for normal operation instead of permanentely using the slow to
     access SoC specific clockevent device.

   - Print the name of the broadcast/wakeup device in /proc/timer_list

   - Make the clocksource watchdog more robust against delays between
     reading the current active clocksource and the watchdog
     clocksource. Such delays can be caused by NMIs, SMIs and vCPU
     preemption.

     Handle this by reading the watchdog clocksource twice, i.e. before
     and after reading the current active clocksource. In case that the
     two watchdog reads shows an excessive time delta, the read sequence
     is repeated up to 3 times.

   - Improve the debug output and add a test module for the watchdog
     mechanism.

   - Reimplementation of the venerable time64_to_tm() function with a
     faster and significantly smaller version. Straight from the source,
     i.e. the author of the related research paper contributed this!

  Driver changes:

   - No new drivers, not even new device tree bindings!

   - Fixes, improvements and cleanups and all over the place"

* tag 'timers-core-2021-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
  time/kunit: Add missing MODULE_LICENSE()
  time: Improve performance of time64_to_tm()
  clockevents: Use list_move() instead of list_del()/list_add()
  clocksource: Print deviation in nanoseconds when a clocksource becomes unstable
  clocksource: Provide kernel module to test clocksource watchdog
  clocksource: Reduce clocksource-skew threshold
  clocksource: Limit number of CPUs checked for clock synchronization
  clocksource: Check per-CPU clock synchronization when marked unstable
  clocksource: Retry clock read if long delays detected
  clockevents: Add missing parameter documentation
  clocksource/drivers/timer-ti-dm: Drop unnecessary restore
  clocksource/arm_arch_timer: Improve Allwinner A64 timer workaround
  clocksource/drivers/arm_global_timer: Remove duplicated argument in arm_global_timer
  clocksource/drivers/arm_global_timer: Make symbol 'gt_clk_rate_change_nb' static
  arm: zynq: don't disable CONFIG_ARM_GLOBAL_TIMER due to CONFIG_CPU_FREQ anymore
  clocksource/drivers/arm_global_timer: Implement rate compensation whenever source clock changes
  clocksource/drivers/ingenic: Rename unreasonable array names
  clocksource/drivers/timer-ti-dm: Save and restore timer TIOCP_CFG
  clocksource/drivers/mediatek: Ack and disable interrupts on suspend
  clocksource/drivers/samsung_pwm: Constify source IO memory
  ...