- 10 Dec, 2015 9 commits
-
-
Alexander Aring authored
This patch will introduce a 6lowpan entry into the debugfs if enabled. Inside this 6lowpan directory we create a subdirectories of all 6lowpan interfaces to offer a per interface debugfs support. Reviewed-by:
Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by:
Alexander Aring <alex.aring@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch introduces register and unregister functionality for lowpan interfaces. While register a lowpan interface there are several things which need to be initialize by the 6lowpan subsystem. Upcoming functionality need to register/unregister per interface components e.g. debugfs entry. Reviewed-by:
-
Stefan Schmidt authored
Acked-by:
Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by:
-
Stefan Schmidt authored
Acked-by:
-
Stefan Schmidt authored
Acked-by:
-
Stefan Schmidt authored
Acked-by:
-
Stefan Schmidt authored
Acked-by:
-
Stefan Schmidt authored
Acked-by:
-
Stefan Schmidt authored
Acked-by:
-
- 09 Dec, 2015 31 commits
-
-
Loic Poulain authored
The Intel Version Read command is used to retrieve information about hardware and firmware version/revision of Intel Bluetooth controllers. This is an Intel generic command used in USB and UART drivers. Signed-off-by:
Loic Poulain <loic.poulain@intel.com> Signed-off-by:
-
Yichen Zhao authored
Fix a crash that may happen when bt_accept_dequeue is run after a Bluetooth connection has been disconnected. bt_accept_unlink was called after release_sock, permitting bt_accept_unlink to run twice on the same socket and cause a NULL pointer dereference. [50510.241632] BUG: unable to handle kernel NULL pointer dereference at 00000000000001a8 [50510.241694] IP: [<ffffffffc01243f7>] bt_accept_unlink+0x47/0xa0 [bluetooth] [50510.241759] PGD 0 [50510.241776] Oops: 0002 [#1] SMP [50510.241802] Modules linked in: rtl8192cu rtl_usb rtlwifi rtl8192c_common 8021q garp stp mrp llc rfcomm bnep nls_iso8859_1 intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp arc4 ath9k ath9k_common ath9k_hw ath kvm eeepc_wmi asus_wmi mac80211 snd_hda_codec_hdmi snd_hda_codec_realtek sparse_keymap crct10dif_pclmul snd_hda_codec_generic crc32_pclmul snd_hda_intel snd_hda_controller cfg80211 snd_hda_codec i915 snd_hwdep snd_pcm ghash_clmulni_intel snd_timer snd soundcore serio_raw cryptd drm_kms_helper drm i2c_algo_bit shpchp ath3k mei_me lpc_ich btusb bluetooth 6lowpan_iphc mei lp parport wmi video mac_hid psmouse ahci libahci r8169 mii [50510.242279] CPU: 0 PID: 934 Comm: krfcommd Not tainted 3.16.0-49-generic #65~14.04.1-Ubuntu [50510.242327] Hardware name: ASUSTeK Computer INC. VM40B/VM40B, BIOS 1501 12/09/2014 [50510.242370] task: ffff8800d9068a30 ti: ffff8800d7a54000 task.ti: ffff8800d7a54000 [50510.242413] RIP: 0010:[<ffffffffc01243f7>] [<ffffffffc01243f7>] bt_accept_unlink+0x47/0xa0 [bluetooth] [50510.242480] RSP: 0018:ffff8800d7a57d58 EFLAGS: 00010246 [50510.242511] RAX: 0000000000000000 RBX: ffff880119bb8c00 RCX: ffff880119bb8eb0 [50510.242552] RDX: ffff880119bb8eb0 RSI: 00000000fffffe01 RDI: ffff880119bb8c00 [50510.242592] RBP: ffff8800d7a57d60 R08: 0000000000000283 R09: 0000000000000001 [50510.242633] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800d8da9eb0 [50510.242673] R13: ffff8800d74fdb80 R14: ffff880119bb8c00 R15: ffff8800d8da9c00 [50510.242715] FS: 0000000000000000(0000) GS:ffff88011fa00000(0000) knlGS:0000000000000000 [50510.242761] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [50510.242794] CR2: 00000000000001a8 CR3: 0000000001c13000 CR4: 00000000001407f0 [50510.242835] Stack: [50510.242849] ffff880119bb8eb0 ffff8800d7a57da0 ffffffffc0124506 ffff8800d8da9eb0 [50510.242899] ffff8800d8da9c00 ffff8800d9068a30 0000000000000000 ffff8800d74fdb80 [50510.242949] ffff8800d6f85208 ffff8800d7a57e08 ffffffffc0159985 000000000000001f [50510.242999] Call Trace: [50510.243027] [<ffffffffc0124506>] bt_accept_dequeue+0xb6/0x180 [bluetooth] [50510.243085] [<ffffffffc0159985>] l2cap_sock_accept+0x125/0x220 [bluetooth] [50510.243128] [<ffffffff810a1b30>] ? wake_up_state+0x20/0x20 [50510.243163] [<ffffffff8164946e>] kernel_accept+0x4e/0xa0 [50510.243200] [<ffffffffc05b97cd>] rfcomm_run+0x1ad/0x890 [rfcomm] [50510.243238] [<ffffffffc05b9620>] ? rfcomm_process_rx+0x8a0/0x8a0 [rfcomm] [50510.243281] [<ffffffff81091572>] kthread+0xd2/0xf0 [50510.243312] [<ffffffff810914a0>] ? kthread_create_on_node+0x1c0/0x1c0 [50510.243353] [<ffffffff8176e9d8>] ret_from_fork+0x58/0x90 [50510.243387] [<ffffffff810914a0>] ? kthread_create_on_node+0x1c0/0x1c0 [50510.243424] Code: 00 48 8b 93 b8 02 00 00 48 8d 83 b0 02 00 00 48 89 51 08 48 89 0a 48 89 83 b0 02 00 00 48 89 83 b8 02 00 00 48 8b 83 c0 02 00 00 <66> 83 a8 a8 01 00 00 01 48 c7 83 c0 02 00 00 00 00 00 00 f0 ff [50510.243685] RIP [<ffffffffc01243f7>] bt_accept_unlink+0x47/0xa0 [bluetooth] [50510.243737] RSP <ffff8800d7a57d58> [50510.243758] CR2: 00000000000001a8 [50510.249457] ---[ end trace bb984f932c4e3ab3 ]--- Signed-off-by:
Yichen Zhao <zhaoyichen@google.com> Signed-off-by:
-
Johan Hedberg authored
When we're doing background scanning and connection attempts it's possible we timeout trying to connect and go back to scanning again. The timeout triggers a HCI_LE_Create_Connection_Cancel which will trigger a Connection Complete with "Unknown Connection Identifier" error status. Since we go back to scanning this isn't really a failure and shouldn't be presented as such to user space through mgmt. The exception to this is if the connection attempt was due to an explicit request on an L2CAP socket (indicated by params->explicit_connect being true). Since the socket will get an error it's consistent to also notify the failure on mgmt in this case. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
-
Johan Hedberg authored
All LE connections are now triggered through a preceding passive scan and waiting for a connectable advertising report. This means we've got the best possible guarantee that the device is within range and should be able to request the controller to perform continuous scanning. This way we minimize the risk that we miss out on any advertising packets. Signed-off-by:
-
Loic Poulain authored
Older Intel controllers need to enter manufacturing mode to perform some vendor specific operations (patching, configuration...). Add enter/exit manufaturing methods and refactor existing manufacturing code. Exit can be configured to perform a reset. Reset can be performed either with patches activated or deactivated. Signed-off-by:
-
Dmitry Tunin authored
BugLink: https://bugs.launchpad.net/bugs/1522949 T: Bus=03 Lev=02 Prnt=02 Port=05 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0930 ProdID=0225 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM43142A0 S: SerialNumber=4CBB58034671 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by:
Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by:
-
Loic Poulain authored
Use the standard HCI_CMD_TIMEOUT(1s) for HCI command instead of HCI_INIT_TIMEOUT(10s) which is not justified in these cases. Signed-off-by:
-
Peter Hurley authored
The N_HCI ldisc does not define a flush_buffer() ldisc method, so the check when opening the ldisc is always false. Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
Johan Hedberg authored
We can simplify a lot of code by making sure hdev->cur_adv_instance is always up-to-date. This allows e.g. the removal of the get_current_adv_instance() helper function and the special HCI_ADV_CURRENT value. This patch also makes selecting instance 0x00 explicit in the various calls where advertising instances aren't enabled, e.g. when HCI_ADVERTISING is set or we've just finished enabling LE. Signed-off-by:
-
Johan Hedberg authored
The logic in powered_update_hci() to initialize the advertising data & state is a bit more complicated than it needs to be. It was previously not doing anything if HCI_LE_ENABLED wasn't set, but this was not obvious by quickly looking at the code. Now the conditions for the various actions are more explicit. Another simplification is due to the fact that __hci_req_schedule_adv_instance() takes care of setting hdev->cur_adv_instance so there's no need to set it before calling the function. Signed-off-by:
-
Johan Hedberg authored
The hci_req_run() function already checks for empty cmd_q and bails out if necessary. Also, req.cmd_q should really be treated as private data of the request and not accessed directly. Signed-off-by:
-
Johan Hedberg authored
The __hci_req_update_scan_rsp_data gets the instance to be updated which should get passed to update_inst_scan_rsp_data() instead of always enabling the current instance. Signed-off-by:
-
Andrei Emeltchenko authored
Only Sliding Window Size is used at the moment for H5 Bluetooth Configuration messages. Signed-off-by:
Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by:
-
Andrei Emeltchenko authored
Using hexadecimal notation for mask makes code easier to read Signed-off-by:
-
Johan Hedberg authored
This flag just tells us whether hdev->adv_instances is empty or not. We can equally well use the list_empty() function to get this information. Signed-off-by:
-
Johan Hedberg authored
The code in the Read Advertising Features mgmt command handler is unnecessarily complicated. Clean it up and remove unnecessary variables & branches. Signed-off-by:
-
Johan Hedberg authored
The request to update HCI during power on is always coming either from hdev->req_workqueue or through an ioctl, so it's safe to use hci_req_sync for it. This way we also eliminate potential races with incoming mgmt commands or other actions while powering on. Part of this refactoring is the splitting of mgmt_powered() into mgmt_power_on() and __mgmt_power_off() functions. The main reason is the different requirements as far as hdev locking is concerned, as highlighted with the __ prefix of the power off API. Since the power on in the case of clearing the AUTO_OFF flag cannot be done synchronously in the set_powered mgmt handler, the hci_power_on work callback is extended to cover this (which also simplifies the set_powered helper a lot). Signed-off-by:
-
Johan Hedberg authored
We'll soon need this both in hci_request.c and mgmt.c so move it to hci_request.c as a generic helper. Signed-off-by:
-
Johan Hedberg authored
We'll soon need to update the EIR both from hci_request.c and mgmt.c so move update_eir() as a more generic request helper to hci_request.c. Signed-off-by:
-
Johan Hedberg authored
We'll soon need this both from hci_request.c and mgmt.c so move it as a request helper function to hci_request.c. Signed-off-by:
-
Johan Hedberg authored
Since the other discoverable changes are behind req_workqueue now it only makes sense to move the discoverable timeout there as well. Signed-off-by:
-
Johan Hedberg authored
The discoverable mode is intrinsically linked with the connectable mode e.g. through sharing the same HCI command (Write Scan Enable) for BR/EDR. It makes therefore sense to move it to hci_request.c and run the changes through the same hdev->req_workqueue. Signed-off-by:
-
Johan Hedberg authored
The Class of Device needs to be changed e.g. for limited discoverable mode. In preparation of moving the discoverable mode to hci_request.c and hdev->req_workqueue, move the Class of Device helpers there first. Signed-off-by:
-
Johan Hedberg authored
This way the connectable changes are synchronized against each other, which helps avoid potential races. The connectable mode is also linked together with LE advertising which makes is more convenient to have it behind the same workqueue. Signed-off-by:
-
Johan Hedberg authored
This paves the way for eventually performing advertising changes through the hdev->req_workqueue. Some new APIs need to be exposed from mgmt.c to hci_request.c and vice-versa, but many of them will go away once hdev->req_workqueue gets used. Signed-off-by:
-
Johan Hedberg authored
This way we avoid the need to do a forward declaration in later patches. Signed-off-by:
-
Johan Hedberg authored
Since Add/Remove Device perform the page scan updates independently from the HCI command completion we've introduced a potential race when multiple mgmt commands are queued. Doing the page scan updates through the req_workqueue ensures that the state changes are performed in a race-free manner. At the same time, to make the request helper more widely usable, extend it to also cover Inquiry Scan changes since those are behind the same HCI command. This is also reflected in the new name of the API as well as the work struct name. Signed-off-by:
-
Tejun Heo authored
sock_cgroup_data is a struct containing an anonymous union. sock_cgroup_set_prioidx() and sock_cgroup_set_classid() were initializing a field inside the anonymous union as follows. struct sock_ccgroup_data skcd_buf = { .val = VAL }; While this is fine on more recent compilers, gcc-4.4.7 triggers the following errors. include/linux/cgroup-defs.h: In function ‘sock_cgroup_set_prioidx’: include/linux/cgroup-defs.h:619: error: unknown field ‘val’ specified in initializer include/linux/cgroup-defs.h:619: warning: missing braces around initializer include/linux/cgroup-defs.h:619: warning: (near initialization for ‘skcd_buf.<anonymous>’) This is because .val belongs to the anonymous union nested inside the struct but the initializer is missing the nesting. Fix it by adding an extra pair of braces. Signed-off-by:Tejun Heo <tj@kernel.org> Reported-by:
Alaa Hleihel <alaa@dev.mellanox.co.il> Fixes: bd1060a1 ("sock, cgroup: add sock->sk_cgroup") Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Julia Lawall authored
The cmac_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Eric Dumazet authored
These fields are updated but never read. Remove the overhead. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
Under heavy TX load, bnx2x_poll() can loop forever and trigger soft lockup bugs. A napi poll handler must yield after one TX completion round, risk of livelock is too high otherwise. Bug is very easy to trigger using a debug build, and udp flood, because of added cpu cycles in TX completion, and we do not receive enough packets to break the loop. Reported-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
