irq_find_mapping() does not need irq_dispose_mapping(), only
irq_create_mapping() does.

Calling irq_dispose_mapping() from mv88e6xxx_g2_irq_mdio_free() and from
the error path of mv88e6xxx_g2_irq_mdio_setup() effectively means that
the mdiobus logic (for internal PHY interrupts) is disposing of a
hwirq->virq mapping which it is not responsible of (but instead, the
function pair mv88e6xxx_g2_irq_setup() + mv88e6xxx_g2_irq_free() is).

With the current code structure, this isn't such a huge problem, because
mv88e6xxx_g2_irq_mdio_free() is called relatively close to the real
owner of the IRQ mappings:

mv88e6xxx_remove()
-> mv88e6xxx_unregister_switch()
-> mv88e6xxx_mdios_unregister()
   -> mv88e6xxx_g2_irq_mdio_free()
-> mv88e6xxx_g2_irq_free()

and the switch isn't 'live' in any way such that it would be able of
generating interrupts at this point (mv88e6xxx_unregister_switch() has
been called).

However, there is a desire to split mv88e6xxx_mdios_unregister() and
mv88e6xxx_g2_irq_free() such that mv88e6xxx_mdios_unregister() only gets
called from mv88e6xxx_teardown(). This is much more problematic, as can
be seen below.

In a cross-chip scenario (say 3 switches d0032004.mdio-mii:10,
d0032004.mdio-mii:11 and d0032004.mdio-mii:12 which form a single DSA
tree), it is possible to unbind the device driver from a single switch
(say d0032004.mdio-mii:10).

When that happens, mv88e6xxx_remove() will be called for just that one
switch, and this will call mv88e6xxx_unregister_switch() which will tear
down the entire tree (calling mv88e6xxx_teardown() for all 3 switches).

Assuming mv88e6xxx_mdios_unregister() was moved to mv88e6xxx_teardown(),
at this stage, all 3 switches will have called irq_dispose_mapping() on
their mdiobus virqs.

When we bind again the device driver to d0032004.mdio-mii:10,
mv88e6xxx_probe() is called for it, which calls dsa_register_switch().
The DSA tree is now complete again, and mv88e6xxx_setup() is called for
all 3 switches.

Also assuming that mv88e6xxx_mdios_register() is moved to
mv88e6xxx_setup() (the 2 assumptions go together), at this point,
d0032004.mdio-mii:11 and d0032004.mdio-mii:12 don't have an IRQ mapping
for the internal PHYs anymore, as they've disposed of it in
mv88e6xxx_teardown(). Whereas switch d0032004.mdio-mii:10 has re-created
it, because its code path comes from mv88e6xxx_probe().

Simply put, this change prepares the driver to handle the movement of
mv88e6xxx_mdios_register() to mv88e6xxx_setup() for cross-chip DSA trees.

Also, the code being deleted was partially wrong anyway (in a way which
may have hidden this other issue). mv88e6xxx_g2_irq_mdio_setup()
populates bus->irq[] starting with offset chip->info->phy_base_addr, but
the teardown path doesn't apply that offset too. So it disposes of virq
0 for phy = [ 0, phy_base_addr ).

All switch families have phy_base_addr = 0, except for MV88E6141 and
MV88E6341 which have it as 0x10. I guess those families would have
happened to work by mistake in cross-chip scenarios too.

I'm deleting the body of mv88e6xxx_g2_irq_mdio_free() but leaving its
call sites and prototype in place. This is because, if we ever need to
add back some teardown procedure in the future, it will be perhaps
error-prone to deduce the proper call sites again. Whereas like this,
no extra code should get generated, it shouldn't bother anybody.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Remove PCI_VENDOR_ID_WANGXUN which is redefined in
drivers/pci/quirks.
Signed-off-by: mengyuanlou <mengyuanlou@net-swift.com>
Link: https://lore.kernel.org/r/20230315091846.17314-1-mengyuanlou@net-swift.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

KVM_HC_CLOCK_PAIRING currently fails inside SEV-SNP guests because the
guest passes an address to static data to the host. In confidential
computing the host can't access arbitrary guest memory so handling the
hypercall runs into an "rmpfault". To make the hypercall work, the guest
needs to explicitly mark the memory as decrypted. Do that in
kvm_arch_ptp_init(), but retain the previous behavior for
non-confidential guests to save us from having to allocate memory.

Add a new arch-specific function (kvm_arch_ptp_exit()) to free the
allocation and mark the memory as encrypted again.
Signed-off-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Link: https://lore.kernel.org/r/20230308150531.477741-1-jpiotrowski@linux.microsoft.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

net/wireless/nl80211.c
  b27f07c5 ("wifi: nl80211: fix puncturing bitmap policy")
  cbbaf2bb ("wifi: nl80211: add a command to enable/disable HW timestamping")
https://lore.kernel.org/all/20230314105421.3608efae@canb.auug.org.au

tools/testing/selftests/net/Makefile
  62199e3f ("selftests: net: Add VXLAN MDB test")
  13715acf ("selftest: Add test for bind() conflicts.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter, wifi and ipsec.

  A little more changes than usual, but it's pretty normal for us that
  the rc3/rc4 PRs are oversized as people start testing in earnest.

  Possibly an extra boost from people deploying the 6.1 LTS but that's
  more of an unscientific hunch.

  Current release - regressions:

   - phy: mscc: fix deadlock in phy_ethtool_{get,set}_wol()

   - virtio: vsock: don't use skbuff state to account credit

   - virtio: vsock: don't drop skbuff on copy failure

   - virtio_net: fix page_to_skb() miscalculating the memory size

  Current release - new code bugs:

   - eth: correct xdp_features after device reconfig

   - wifi: nl80211: fix the puncturing bitmap policy

   - net/mlx5e: flower:
      - fix raw counter initialization
      - fix missing error code
      - fix cloned flow attribute

   - ipa:
      - fix some register validity checks
      - fix a surprising number of bad offsets
      - kill FILT_ROUT_CACHE_CFG IPA register

  Previous releases - regressions:

   - tcp: fix bind() conflict check for dual-stack wildcard address

   - veth: fix use after free in XDP_REDIRECT when skb headroom is small

   - ipv4: fix incorrect table ID in IOCTL path

   - ipvlan: make skb->skb_iif track skb->dev for l3s mode

   - mptcp:
      - fix possible deadlock in subflow_error_report
      - fix UaFs when destroying unaccepted and listening sockets

   - dsa: mv88e6xxx: fix max_mtu of 1492 on 6165, 6191, 6220, 6250, 6290

  Previous releases - always broken:

   - tcp: tcp_make_synack() can be called from process context, don't
     assume preemption is disabled when updating stats

   - netfilter: correct length for loading protocol registers

   - virtio_net: add checking sq is full inside xdp xmit

   - bonding: restore IFF_MASTER/SLAVE flags on bond enslave Ethertype
     change

   - phy: nxp-c45-tja11xx: fix MII_BASIC_CONFIG_REV bit number

   - eth: i40e: fix crash during reboot when adapter is in recovery mode

   - eth: ice: avoid deadlock on rtnl lock when auxiliary device
     plug/unplug meets bonding

   - dsa: mt7530:
      - remove now incorrect comment regarding port 5
      - set PLL frequency and trgmii only when trgmii is used

   - eth: mtk_eth_soc: reset PCS state when changing interface types

  Misc:

   - ynl: another license adjustment

   - move the TCA_EXT_WARN_MSG attribute for tc action"

* tag 'net-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
  selftests: bonding: add tests for ether type changes
  bonding: restore bond's IFF_SLAVE flag if a non-eth dev enslave fails
  bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change
  net: renesas: rswitch: Fix GWTSDIE register handling
  net: renesas: rswitch: Fix the output value of quote from rswitch_rx()
  ethernet: sun: add check for the mdesc_grab()
  net: ipa: fix some register validity checks
  net: ipa: kill FILT_ROUT_CACHE_CFG IPA register
  net: ipa: add two missing declarations
  net: ipa: reg: include <linux/bug.h>
  net: xdp: don't call notifiers during driver init
  net/sched: act_api: add specific EXT_WARN_MSG for tc action
  Revert "net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy"
  net: dsa: microchip: fix RGMII delay configuration on KSZ8765/KSZ8794/KSZ8795
  ynl: make the tooling check the license
  ynl: broaden the license even more
  tools: ynl: make definitions optional again
  hsr: ratelimit only when errors are printed
  qed/qed_mng_tlv: correctly zero out ->min instead of ->hour
  selftests: net: devlink_port_split.py: skip test if no suitable device available
  ...

Pull block fixes from Jens Axboe:
 "A bit bigger than usual, as the NVMe pull request missed last weeks
  submission. In detail:

   - NVMe pull request via Christoph:
        - Avoid potential UAF in nvmet_req_complete (Damien Le Moal)
        - More quirks (Elmer Miroslav Mosher Golovin, Philipp Geulen)
        - Fix a memory leak in the nvme-pci probe teardown path
          (Irvin Cote)
        - Repair the MAINTAINERS entry (Lukas Bulwahn)
        - Fix handling single range discard request (Ming Lei)
        - Show more opcode names in trace events (Minwoo Im)
        - Fix nvme-tcp timeout reporting (Sagi Grimberg)

   - MD pull request via Song:
        - Two fixes for old issues (Neil)
        - Resource leak in device stopping (Xiao)

   - Bio based device stats fix (Yu)

   - Kill unused CONFIG_BLOCK_COMPAT (Lukas)

   - sunvdc missing mdesc_grab() failure check (Liang)

   - Fix for reversal of request ordering upon issue for certain cases
     (Jan)

   - null_blk timeout fixes (Damien)

   - Loop use-after-free fix (Bart)

   - blk-mq SRCU fix for BLK_MQ_F_BLOCKING devices (Chris)"

* tag 'block-6.3-2023-03-16' of git://git.kernel.dk/linux:
  block: remove obsolete config BLOCK_COMPAT
  md: select BLOCK_LEGACY_AUTOLOAD
  block: count 'ios' and 'sectors' when io is done for bio-based device
  block: sunvdc: add check for mdesc_grab() returning NULL
  nvmet: avoid potential UAF in nvmet_req_complete()
  nvme-trace: show more opcode names
  nvme-tcp: add nvme-tcp pdu size build protection
  nvme-tcp: fix opcode reporting in the timeout handler
  nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM620
  nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV3000
  nvme-pci: fixing memory leak in probe teardown path
  nvme: fix handling single range discard request
  MAINTAINERS: repair malformed T: entries in NVM EXPRESS DRIVERS
  block: null_blk: cleanup null_queue_rq()
  block: null_blk: Fix handling of fake timeout request
  blk-mq: fix "bad unlock balance detected" on q->srcu in __blk_mq_run_dispatch_ops
  loop: Fix use-after-free issues
  block: do not reverse request order when flushing plug list
  md: avoid signed overflow in slot_store()
  md: Free resources in __md_stop

Pull io_uring fixes from Jens Axboe:

 - When PF_NO_SETAFFINITY was removed for io-wq threads, we kind of
   forgot about the SQPOLL thread. Remove it there as well, there's even
   less of a reason to set it there (Michal)

 - Fixup a confusing 'ret' setting (Li)

 - When MSG_RING is used to send a direct descriptor to another ring,
   it's possible to have it allocate it on the target ring rather than
   provide a specific index for it. If this is done, return the chosen
   value in the CQE, like we would've done locally (Pavel)

 - Fix a regression in this series on huge page bvec collapsing (Pavel)

* tag 'io_uring-6.3-2023-03-16' of git://git.kernel.dk/linux:
  io_uring/rsrc: fix folio accounting
  io_uring/msg_ring: let target know allocated index
  io_uring: rsrc: Optimize return value variable 'ret'
  io_uring/sqpoll: Do not set PF_NO_SETAFFINITY on sqpoll threads

Pull power management fixes from Rafael Wysocki:
 "These fix an error code path issue in a cpuidle driver and make the
  sleepgraph utility more robust against unexpected input.

  Specifics:

   - Fix the psci_pd_init_topology() failure path in the PSCI cpuidle
     driver (Shawn Guo)

   - Modify the sleepgraph utility so it does not crash on binary data
     in device names (Todd Brandt)"

* tag 'pm-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  pm-graph: sleepgraph: Avoid crashing on binary data in device names
  cpuidle: psci: Iterate backwards over list in psci_pd_remove()

Pull ACPI fixes from Rafael Wysocki:
 "These add some new quirks, fix PPTT handling, fix an ACPI utility and
  correct a mistake in the ACPI documentation.

  Specifics:

   - Fix ACPI PPTT handling to avoid sleep in the atomic context when it
     is not present (Sudeep Holla)

   - Add 'backlight=native' DMI quirk for Dell Vostro 15 3535 to the
     ACPI video driver (Chia-Lin Kao)

   - Add ACPI quirks for I2C device enumeration on Lenovo Yoga Book X90
     and Acer Iconia One 7 B1-750 (Hans de Goede)

   - Fix handling of invalid command line option values in the ACPI
     pfrut utility (Chen Yu)

   - Fix references to I2C device data type in the ACPI documentation
     for device enumeration (Andy Shevchenko)"

* tag 'acpi-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: tools: pfrut: Check if the input of level and type is in the right numeric range
  ACPI: PPTT: Fix to avoid sleep in the atomic context when PPTT is absent
  ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Book X90
  ACPI: x86: Add skip i2c clients quirk for Acer Iconia One 7 B1-750
  ACPI: x86: Introduce an acpi_quirk_skip_gpio_event_handlers() helper
  ACPI: video: Add backlight=native DMI quirk for Dell Vostro 15 3535
  ACPI: docs: enumeration: Correct reference to the I²C device data type

Pull turbostat fweaks and fixes from Len Brown:
 "Leprechaun sized fixes and tweaks touching only turbostat.

  'Keeping happy users happy since 2010'"

* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools/power turbostat: version 2023.03.17
  tools/power turbostat: fix decoding of HWP_STATUS
  tools/power turbostat: Introduce support for EMR
  tools/power turbostat: remove stray newlines from warn/warnx strings
  tools/power turbostat: Fix /dev/cpu_dma_latency warnings
  tools/power turbostat: Provide better debug messages for failed capabilities accesses
  tools/power turbostat: update dump of SECONDARY_TURBO_RATIO_LIMIT

Pull xen fixes from Juergen Gross:

 - cleanup for xen time handling

 - enable the VGA console in a Xen PVH dom0

 - cleanup in the xenfs driver

* tag 'for-linus-6.3-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: remove unnecessary (void*) conversions
  x86/PVH: obtain VGA console info in Dom0
  x86/xen/time: cleanup xen_tsc_safe_clocksource
  xen: update arch/x86/include/asm/xen/cpuid.h

Pull RISC-V fixes from Palmer Dabbelt:

 - fixes to the ASID allocator to avoid leaking stale mappings between
   tasks

 - fix the vmalloc fault handler to tolerate huge pages

* tag 'riscv-for-linus-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: mm: Support huge page in vmalloc_fault()
  riscv: asid: Fixup stale TLB entry cause application crash
  Revert "riscv: mm: notify remote harts about mmu cache updates"

Pull s390 fixes from Vasily Gorbik:

 - Update defconfigs

 - Fix early boot code by adding missing intersection check to prevent
   potential overwriting of the ipl report

 - Fix a use-after-free issue in s390-specific code related to PCI
   resources being retained after hot-unplugging individual functions,
   by removing the resources from the PCI bus's resource list and using
   the zpci_bar_struct's resource pointer directly

* tag 's390-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: update defconfigs
  PCI: s390: Fix use-after-free of PCI resources with per-function hotplug
  s390/ipl: add missing intersection check to ipl_report handling

Pull powerpc fixes from Michael Ellerman:

 - Fix false detection of read faults, introduced by execute-only
   support

 - Fix a build failure when GENERIC_ALLOCATOR is not selected

Thanks to Russell Currey, Randy Dunlap, Michal Suchánek, Nathan Lynch,
and Benjamin Gray.

* tag 'powerpc-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm: Fix false detection of read faults
  powerpc/pseries: RTAS work area requires GENERIC_ALLOCATOR

Pull MMC host fixes from Ulf Hansson:

 - dw_mmc-starfive: Fix initialization of the prev_err variable

 - sdhci_am654: Lower power-on failed message severity

* tag 'mmc-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: dw_mmc-starfive: Fix initialization of prev_err
  mmc: sdhci_am654: lower power-on failed message severity

Pull sound fixes from Takashi Iwai:
 "Nothing surprising, a collection of small device-specific fixes.

  The majority of changes are for ASoC Intel stuff, while a few other
  ASoC and HD-audio fixes are found"

* tag 'sound-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (31 commits)
  ALSA: hda/ca0132: fixup buffer overrun at tuning_ctl_set()
  ALSA: asihpi: check pao in control_message()
  ASoC: hdmi-codec: only startup/shutdown on supported streams
  ASoC: da7219: Initialize jack_det_mutex
  ALSA: hda: Match only Intel devices with CONTROLLER_IN_GPU()
  ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book2 Pro
  ALSA: hda/realtek: fix speaker, mute/micmute LEDs not work on a HP platform
  ALSA: hda: intel-dsp-config: add MTL PCI id
  ASoC: SOF: IPC4: update gain ipc msg definition to align with fw
  ASoC: SOF: sof-audio: don't squelch errors in WIDGET_SETUP phase
  ASoC: SOF: Intel: hda-ctrl: re-add sleep after entering and exiting reset
  ASoC: SOF: Intel: hda-dsp: harden D0i3 programming sequence
  ASoC: SOF: ipc4-topology: set dmic dai index from copier
  ASoC: SOF: sof-audio: Fix broken early bclk feature for SSP
  ASoC: SOF: Intel: pci-tng: revert invalid bar size setting
  ASoC: SOF: topology: Fix error handling in sof_widget_ready()
  ASoC: Intel: soc-acpi: fix copy-paste issue in topology names
  ASoC: SOF: ipc4-topology: Fix incorrect sample rate print unit
  ASoC: SOF: ipc3: Check for upper size limit for the received message
  ASOC: SOF: Intel: pci-tgl: Fix device description
  ...

Pull drm fixes from Dave Airlie:
 "Seems like a pretty regular rc3, i915 and amdgpu with the usual
  selection of fixes, then a scattering of fixes across misc drivers and
  other areas:

  accel:
   - build fix for accel

  edid:
   - fix info leak in edid

  ttm:
   - fix NULL ptr deref
   - reference counting fix

  i915:
   - Fix hwmon PL1 power limit enabling
   - Fix audio ELD handling for DP MST
   - Fix PSR io and wake line calculations
   - Fix DG2 HDMI modes with 267.30 and 319.89 MHz pixel clocks
   - Fix SSEU subslice out-of-bounds access
   - Fix misuse of non-idle barriers as fence trackers

  amdgpu:
   - SMU 13 update
   - RDNA2 suspend/resume fix when overclocking is enabled
   - SRIOV VCN fixes
   - HDCP suspend/resume fix
   - Fix drm polling splat regression
   - Fix dirty rectangle tracking for PSR
   - Fix vangogh regression on certain BIOSes
   - Misc display fixes
   - Suspend/resume IOMMU regression fix

  amdkfd:
   - Fix BO offset for multi-VMA page migration
   - Fix a possible double free
   - Fix potential use after free
   - Fix process cleanup on module exit

  bridge:
   - fix returned array size name documentation

  fbdev:
   - ref-counting fix for fbdev deferred I/O

  virtio:
   - dma sync fix

  shmem-helper:
   - error path fix

  msm:
   - shrinker blocking fix

  panfrost:
   - shrinker rpm fix

  chipsfb:
   - fix error code

  meson:
   - fix 1px pink line
   - fix regulator interaction

  sun4i:
   - fix missing component unbind"

* tag 'drm-fixes-2023-03-17' of git://anongit.freedesktop.org/drm/drm: (38 commits)
  drm/ttm: drop extra ttm_bo_put in ttm_bo_cleanup_refs
  drm/amdgpu: Don't resume IOMMU after incomplete init
  drm/amdkfd: Fixed kfd_process cleanup on module exit.
  drm/amd/display: disconnect MPCC only on OTG change
  drm/amd/display: Fix DP MST sinks removal issue
  drm/amd/display: Do not set DRR on pipe Commit
  drm/amd/display: Remove OTG DIV register write for Virtual signals.
  drm/meson: dw-hdmi: Fix devm_regulator_*get_enable*() conversion again
  drm/bridge: Fix returned array size name for atomic_get_input_bus_fmts kdoc
  drm/amdgpu/vcn: Disable indirect SRAM on Vangogh broken BIOSes
  drm/amdgpu/nv: fix codec array for SR_IOV
  drm/amd/display: Write to correct dirty_rect
  drm/amdgpu: move poll enabled/disable into non DC path
  drm/amd/display: Fix HDCP failing to enable after suspend
  drm/amdkfd: fix potential kgd_mem UAFs
  drm/amdgpu/vcn: custom video info caps for sriov
  drm/amd/pm: Fix sienna cichlid incorrect OD volage after resume
  drm/amd/pm: bump SMU 13.0.4 driver_if header version
  drm/amdkfd: fix a potential double free in pqm_create_queue
  drm/amdkfd: Get prange->offset after svm_range_vram_node_new
  ...

Pull SCSI fixes from James Bottomley:
 "Ten patches, eight in drivers and two in the core, which correct a
  regression from directory removal and add a no VPD size quirk also to
  fix a regression. All pretty small"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: mcq: Use active_reqs to check busy in clock scaling
  scsi: core: Fix a procfs host directory removal regression
  scsi: core: Add BLIST_NO_VPD_SIZE for some VDASD
  scsi: mpi3mr: Fix expander node leak in mpi3mr_remove()
  scsi: mpi3mr: Fix memory leaks in mpi3mr_init_ioc()
  scsi: mpi3mr: Fix sas_hba.phy memory leak in mpi3mr_remove()
  scsi: mpi3mr: Fix mpi3mr_hba_port memory leak in mpi3mr_remove()
  scsi: mpi3mr: Fix config page DMA memory leak
  scsi: mpi3mr: Fix throttle_groups memory leak
  scsi: mpt3sas: Fix NULL pointer access in mpt3sas_transport_port_add()

Merge a PSCI cpuidle driver fix for 6.3-rc1:

 - Fix the psci_pd_init_topology() failure path in the PSCI cpuidle
   driver (Shawn Guo).

* pm-cpuidle:
  cpuidle: psci: Iterate backwards over list in psci_pd_remove()

Merge a new ACPI backlight quirk, new ACPI quirks for I2C device
enumeration on some platforms, a pfrut utility fix and an ACPI
documentation fix for 6.3-rc3:

 - Add backlight=native DMI quirk for Dell Vostro 15 3535 to the ACPI
   video driver (Chia-Lin Kao).

 - Add ACPI quirks for I2C devices enumeration on Lenovo Yoga Book X90
   and Acer Iconia One 7 B1-750 (Hans de Goede).

 - Fix handling of invalid command line option values in the ACPI pfrut
   utility (Chen Yu).

 - Fix references to I2C device data type in the ACPI documentation for
   device enumeration (Andy Shevchenko).

* acpi-video:
  ACPI: video: Add backlight=native DMI quirk for Dell Vostro 15 3535

* acpi-x86:
  ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Book X90
  ACPI: x86: Add skip i2c clients quirk for Acer Iconia One 7 B1-750
  ACPI: x86: Introduce an acpi_quirk_skip_gpio_event_handlers() helper

* acpi-tools:
  ACPI: tools: pfrut: Check if the input of level and type is in the right numeric range

* acpi-docs:
  ACPI: docs: enumeration: Correct reference to the I²C device data type

Happy St. Patrick's Day!
Signed-off-by: Len Brown <len.brown@intel.com>

The "excursion to minimum" information is in bit2
in HWP_STATUS MSR. Fix the bitmask used for
decoding the register.
Signed-off-by: Antti Laakso <antti.laakso@intel.com>
Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Introduce support for EMR.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

warn(3) terminates strings with newlines
Signed-off-by: Len Brown <len.brown@intel.com>

When running as non-root the following error is seen in turbostat:

turbostat: fopen /dev/cpu_dma_latency
: Permission denied

turbostat and the man page have information on how to avoid other
permission errors, so these can be fixed the same way.

Provide better /dev/cpu_dma_latency warnings that provide instructions on
how to avoid the error, and update the man page.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>

turbostat reports some capabilities access errors and not others.  Provide
the same debug message for all errors.

[lenb: remove extra quotes]

Cc: David Arcari <darcari@redhat.com>
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>

cosmetic only (but useful if you copy/paste)
Signed-off-by: Len Brown <len.brown@intel.com>

The refcount wr_tx_refcnt may cause cache thrashing problems among
cores and we can use percpu ref to mitigate this issue here. We
gain some performance improvement with percpu ref here on our
customized smc-r verion. Applying cache alignment may also mitigate
this problem but it seem more reasonable to use percpu ref here.
We can also replace wr_reg_refcnt with one percpu reference like
wr_tx_refcnt.

redis-benchmark on smc-r with atomic wr_tx_refcnt:
SET: 525707.06 requests per second, p50=0.087 msec
GET: 554877.38 requests per second, p50=0.087 msec

redis-benchmark on the percpu_ref version:
SET: 540482.06 requests per second, p50=0.087 msec
GET: 570711.12 requests per second, p50=0.079 msec

Cases are like "redis-benchmark -h x.x.x.x -q -t set,get -P 1 -n
5000000 -c 50 -d 10 --threads 4".
Signed-off-by: Kai Shen <KaiShen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
inet: better const qualifier awareness

inet_sk() can be changed to propagate const qualifier,
thanks to container_of_const()

Following patches in this series add more const qualifiers.

Other helpers like tcp_sk(), udp_sk(), raw_sk(), ... will be handled
in following series.
====================
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now both raw_v4_match() and raw_v6_match() accept a const socket,
raw_lookup() can do the same to clarify its role.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This clarifies raw_v4_match() intent.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This clarifies raw_v6_match() intent.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This clarifies __udp_v6_is_mcast_sock() intent.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

inet6_mc_check() is essentially a read-only function.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This clarifies __udp_is_mcast_sock() intent.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This clarifies ip_mc_sf_allow() intent.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We can change inet_sk() to propagate const qualifier of its argument.

This should avoid some potential errors caused by accidental
(const -> not_const) promotion.

Other helpers like tcp_sk(), udp_sk(), raw_sk() will be handled
in separate patch series.

v2: use container_of_const() as advised by Jakub and Linus
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/netdev/20230315142841.3a2ac99a@kernel.org/
Link: https://lore.kernel.org/netdev/CAHk-=wiOf12nrYEF2vJMcucKjWPN-Ns_SW9fA7LwST_2Dzp7rw@mail.gmail.com/Signed-off-by: David S. Miller <davem@davemloft.net>

Chuck wanted to put the UAPI header in linux/net/ which seems
reasonable, allow genetlink families to choose the location.
It doesn't really matter for non-C-like languages.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Devlink is quite complex but put in the very basics so we can
incrementally fill in the commands as needed.

$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml \
    --dump get

[{'bus-name': 'netdevsim',
  'dev-name': 'netdevsim1',
  'dev-stats': {'reload-stats': {'reload-action-info': {'reload-action': 1,
                                                        'reload-action-stats': {'reload-stats-entry': [{'reload-stats-limit': 0,
                                                                                                        'reload-stats-value': 0}]}}},
                'remote-reload-stats': {'reload-action-info': {'reload-action': 2,
                                                               'reload-action-stats': {'reload-stats-entry': [{'reload-stats-limit': 0,
                                                                                                               'reload-stats-value': 0},
                                                                                                              {'reload-stats-limit': 1,
                                                                                                               'reload-stats-value': 0}]}}}},
  'reload-failed': 0}]
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
net/packet: KCSAN awareness

This series is based on one syzbot report [1]

Seven 'flags/booleans' are converted to atomic bit variant.

po->xmit and po->tp_tstamp accesses get annotations.

[1]
BUG: KCSAN: data-race in packet_rcv / packet_setsockopt

read-write to 0xffff88813dbe84e4 of 1 bytes by task 12312 on cpu 0:
packet_setsockopt+0xb77/0xe60 net/packet/af_packet.c:3900
__sys_setsockopt+0x212/0x2b0 net/socket.c:2252
__do_sys_setsockopt net/socket.c:2263 [inline]
__se_sys_setsockopt net/socket.c:2260 [inline]
__x64_sys_setsockopt+0x62/0x70 net/socket.c:2260
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

read to 0xffff88813dbe84e4 of 1 bytes by task 1911 on cpu 1:
packet_rcv+0x4b1/0xa40 net/packet/af_packet.c:2187
deliver_skb net/core/dev.c:2189 [inline]
dev_queue_xmit_nit+0x3a9/0x620 net/core/dev.c:2259
xmit_one+0x71/0x2a0 net/core/dev.c:3586
dev_hard_start_xmit+0x72/0x120 net/core/dev.c:3606
__dev_queue_xmit+0x91c/0x11c0 net/core/dev.c:4256
dev_queue_xmit include/linux/netdevice.h:3008 [inline]
neigh_hh_output include/net/neighbour.h:530 [inline]
neigh_output include/net/neighbour.h:544 [inline]
ip6_finish_output2+0x9e9/0xc30 net/ipv6/ip6_output.c:134
__ip6_finish_output net/ipv6/ip6_output.c:195 [inline]
ip6_finish_output+0x395/0x4f0 net/ipv6/ip6_output.c:206
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip6_output+0x10e/0x210 net/ipv6/ip6_output.c:227
dst_output include/net/dst.h:445 [inline]
ip6_local_out+0x60/0x80 net/ipv6/output_core.c:161
ip6tunnel_xmit include/net/ip6_tunnel.h:161 [inline]
udp_tunnel6_xmit_skb+0x321/0x4a0 net/ipv6/ip6_udp_tunnel.c:109
send6+0x2ed/0x3b0 drivers/net/wireguard/socket.c:152
wg_socket_send_skb_to_peer+0xbb/0x120 drivers/net/wireguard/socket.c:178
wg_packet_create_data_done drivers/net/wireguard/send.c:251 [inline]
wg_packet_tx_worker+0x142/0x360 drivers/net/wireguard/send.c:276
process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
worker_thread+0x618/0xa70 kernel/workqueue.c:2436
kthread+0x1a9/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
====================
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>