- 02 Sep, 2024 1 commit
-
-
Maarten Lankhorst authored
The most recent merge commits introduced some fails to drm/drm-next, I've noticed these when looking at the xe patches. Solve it! Fixes: 8bdb468d ("Merge tag 'drm-xe-next-2024-08-28' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next") Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> [sima: add fixes line, and drop 3rd hunk because that's just a bugfix, not mismerge, which should go in seperately with proper fixes line and review/testing.] Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20240902112002.489225-1-maarten.lankhorst@linux.intel.com
-
- 30 Aug, 2024 3 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-2024-08-29' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next Cross-driver (xe-core) Changes: - Require BMG scanout buffers to be 64k physically aligned (Maarten) Core (drm) Changes: - Introducing Xe2 ccs modifiers for integrated and discrete graphics (Juha-Pekka) Driver Changes: - General cleanup and more work moving towards intel_display isolation (Jani) - New display workaround (Suraj) - Use correct cp_irq_count on HDCP (Suraj) - eDP PSR fix when CRC is enabled (Jouni) - Fix DP MST state after a sink reset (Imre) - Fix Arrow Lake GSC firmware version (John) - Use chained DSBs for LUT programming (Ville) Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZtCC0lJ0Zf3MoSdW@intel.com
-
https://gitlab.freedesktop.org/drm/xe/kernelDave Airlie authored
UAPI Changes: - Fix OA format masks which were breaking build with gcc-5 Cross-subsystem Changes: Driver Changes: - Use dma_fence_chain_free in chain fence unused as a sync (Matthew Brost) - Refactor hw engine lookup and mmio access to be used in more places (Dominik, Matt Auld, Mika Kuoppala) - Enable priority mem read for Xe2 and later (Pallavi Mishra) - Fix PL1 disable flow in xe_hwmon_power_max_write (Karthik) - Fix refcount and speedup devcoredump (Matthew Brost) - Add performance tuning changes to Xe2 (Akshata, Shekhar) - Fix OA sysfs entry (Ashutosh) - Add first GuC firmware support for BMG (Julia) - Bump minimum GuC firmware for platforms under force_probe to match LNL and BMG (Julia) - Fix access check on user fence creation (Nirmoy) - Add/document workarounds for Xe2 (Julia, Daniele, John, Tejas) - Document workaround and use proper WA infra (Matt Roper) - Fix VF configuration on media GT (Michal Wajdeczko) - Fix VM dma-resv lock (Matthew Brost) - Allow suspend/resume exec queue backend op to be called multiple times (Matthew Brost) - Add GT stats to debugfs (Nirmoy) - Add hwconfig to debugfs (Matt Roper) - Compile out all debugfs code with ONFIG_DEUBG_FS=n (Lucas) - Remove dead kunit code (Jani Nikula) - Refactor drvdata storing to help display (Jani Nikula) - Cleanup unsused xe parameter in pte handling (Himal) - Rename s/enable_display/probe_display/ for clarity (Lucas) - Fix missing MCR annotation in couple of registers (Tejas) - Fix DGFX display suspend/resume (Maarten) - Prepare exec_queue_kill for PXP handling (Daniele) - Fix devm/drmm issues (Daniele, Matthew Brost) - Fix tile and ggtt fini sequences (Matthew Brost) - Fix crashes when probing without firmware in place (Daniele, Matthew Brost) - Use xe_managed for kernel BOs (Daniele, Matthew Brost) - Future-proof dss_per_group calculation by using hwconfig (Matt Roper) - Use reserved copy engine for user binds on faulting devices (Matthew Brost) - Allow mixing dma-fence jobs and long-running faulting jobs (Francois) - Cleanup redundant arg when creating use BO (Nirmoy) - Prevent UAF around preempt fence (Auld) - Fix display suspend/resume (Maarten) - Use vma_pages() helper (Thorsten) - Calculate pagefault queue size (Stuart, Matthew Auld) - Fix missing pagefault wq destroy (Stuart) - Fix lifetime handling of HW fence ctx (Matthew Brost) - Fix order destroy order for jobs (Matthew Brost) - Fix TLB invalidation for media GT (Matthew Brost) - Document GGTT (Rodrigo Vivi) - Refactor GGTT layering and fix runtime outer protection (Rodrigo Vivi) - Handle HPD polling on display pm runtime suspend/resume (Imre, Vinod) - Drop unrequired NULL checks (Apoorva, Himal) - Use separate rpm lockdep map for non-d3cold-capable devices (Thomas Hellström) - Support "nomodeset" kernel command-line option (Thomas Zimmermann) - Drop force_probe requirement for LNL and BMG (Lucas, Balasubramani) Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-misc-next-2024-08-29' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.12: UAPI Changes: devfs: - support device numbers up to MINORBITS limit Core Changes: ci: - increase job timeout devfs: - use XArray for minor ids displayport: - mst: GUID improvements docs: - add fixes and cleanups panic: - optionally display QR code Driver Changes: amdgpu: - faster vblank disabling - GUID improvements gm12u320 - convert to struct drm_edid host1x: - fix syncpoint IRQ during resume - use iommu_paging_domain_alloc() imx: - ipuv3: convert to struct drm_edid omapdrm: - improve error handling panel: - add support for BOE TV101WUM-LL2 plus DT bindings - novatek-nt35950: improve error handling - nv3051d: improve error handling - panel-edp: add support for BOE NE140WUM-N6G; revert support for SDC ATNA45AF01 - visionox-vtdr6130: improve error handling; use devm_regulator_bulk_get_const() renesas: - rz-du: add support for RZ/G2UL plus DT bindings sti: - convert to struct drm_edid tegra: - gr3d: improve PM domain handling - convert to struct drm_edid Signed-off-by:
-
- 29 Aug, 2024 24 commits
-
-
Ville Syrjälä authored
In order to better handle the necessary DSB DEwake tricks let's switch over to using a chained DSB for the actual LUT programming. The CPU will start 'dsb_color_commit', which in turn will start the chained 'dsb_color_vblank'. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-15-ville.syrjala@linux.intel.comReviewed-by:
Animesh Manna <animesh.manna@intel.com>
-
Ville Syrjälä authored
We'll soon utilize several DSBs during the commit. To that end rename the current crtc_state->dsb to crtc_state->dsb_color_vblank to better reflect its role (color managemnent stuff programmed during vblank). Signed-off-by:
-
Ville Syrjälä authored
In order to avoid the DSB keeping the DEwake permanently asserted we must clear DSB_PMCTRL_2.DSB_FORCE_DEWAKE once we are done. For good measure do the same for DSB_PMCTRL.DSB_ENABLE_DEWAKE. Experimentally this doens't seem to be actually necessary (unlike with DSB_FORCE_DEWAKE). That is, the DSB_ENABLE_DEWAKE doesn't seem to do anything whenever the DSB is not active. But I'd hate to waste a ton of power in case there I'm wrong and there is some way DEwake could remaing asserted. One extra register write is a small price to pay for some peace of mind. Signed-off-by:
-
Ville Syrjälä authored
Allow intel_dsb_chain() to start the chained DSB at start of the undelaye vblank. This is slightly more involved than simply setting the bit as we must use the DEwake mechanism to eliminate pkgC latency. And DSB_ENABLE_DEWAKE itself is problematic in that it allows us to configure just a single scanline, and if the current scanline is already past that DSB_ENABLE_DEWAKE won't do anything, rendering the whole thing moot. The current workaround involves checking the pipe's current scanline with the CPU, and if it looks like we're about to miss the configured DEwake scanline we set DSB_FORCE_DEWAKE to immediately assert DEwake. This is somewhat racy since the hardware is making progress all the while we're checking it on the CPU. We can make things less racy by chaining two DSBs and handling the DSB_FORCE_DEWAKE stuff entirely without CPU involvement: 1. CPU starts the first DSB immediately 2. First DSB configures the second DSB, including its dewake_scanline 3. First DSB starts the second w/ DSB_WAIT_FOR_VBLANK 4. First DSB asserts DSB_FORCE_DEWAKE 5. First DSB waits until we're outside the dewake_scanline-vblank_start window 6. First DSB deasserts DSB_FORCE_DEWAKE That will guarantee that the we are fully awake when the second DSB starts to actually execute. Signed-off-by:
-
Ville Syrjälä authored
In order to handle the DEwake tricks without involving the CPU we need a mechanism by which one DSB can start another one. Add a basic function to do so. We'll extend it later with additional code to actually deal with DEwake. Signed-off-by:
-
Ville Syrjälä authored
Add functions to emit a DSB scanline window wait instructions. We can either wait for the scanline to be IN the window or OUT of the window. The hardware doesn't handle wraparound so we must manually deal with it by swapping the IN range to the inverse OUT range, or vice versa. Also add a bit of paranoia to catch the edge case of waiting for the entire frame. That doesn't make sense since an IN wait would be a nop, and an OUT wait would imply waiting forever. Most of the time this also results in both scanline ranges (original and inverted) to have lower=upper+1 which is nonsense from the hw POV. For now we are only handling the case where the scanline wait happens prior to latching the double buffered registers during the commit (which might change the timings due to LRR/VRR/etc.) Signed-off-by:
-
Ville Syrjälä authored
Adjust the code that determines the correct DSB_CHICKEN value to be usable for use within DSB commands themselves. Ie. precompute it based on our knowledge of what the hardware state (VRR vs. not mainly) will be at the time of the commit. Signed-off-by:
-
Ville Syrjälä authored
When determining various scanlines for DSB use we should take into account whether VRR is active at the time when the DSB uses said scanline information. For now all DSB scanline usage occurs prior to the actual commit, so we only need to care about the state of VRR at that time. I've decided to move intel_crtc_scanline_to_hw() in its entirety to the DSB code as it will also need to know the actual state of VRR in order to do its job 100% correctly. TODO: figure out how much of this could be moved to some more generic place and perhaps be shared with the CPU vblank evasion code/etc... Signed-off-by: -
Ville Syrjälä authored
Currently we calculate the DEwake scanline based on the delayed vblank start, while in reality it should be computed based on the undelayed vblank start (as that is where the DSB actually starts). Currently it doesn't really matter as we don't have any vblank delay configured, but that may change in the future so let's be accurate in what we do. We can also remove the max() as intel_crtc_scanline_to_hw() can deal with negative numbers, which there really shouldn't be anyway. Signed-off-by:
-
Ville Syrjälä authored
Relocate intel_dsb_dewake_scanline() and dsb_chicken() upwards in the file. I need to reuse these while emitting DSB commands, and I'd like to keep the DSB command emission stuff more or less grouped together in the file. Also drop the intel_ prefix from intel_dsb_dewake_scanline() since it's all internal stuff and thus doesn't need so much namespacing. Signed-off-by:
-
Ville Syrjälä authored
Currently we switch from out software idea of a scanline to the hw's idea of a scanline during the commit phase in _intel_dsb_commit(). While that is slightly easier due to fastsets fiddling with the timings, we'll also need to generate proper hw scanline numbers already when emitting DSB scanline wait instructions. So this approach won't do in the future. Switch to hw scanline numbers earlier. Also intel_dsb_dewake_scanline() itself already makes some assumptions about VRR that don't take into account VRR toggling during fastsets, so technically delaying the sw->hw conversion doesn't even help us. The other reason for delaying the conversion was that we are using intel_get_crtc_scanline() during intel_dsb_commit() which gives us the current sw scanline. But this is pretty low level stuff anyway so just using raw PIPEDSL reads seems fine here, and that of course gives us the hw scanline directly, reducing the need to do so many conversions. v2: Return the non-hw scanline from intel_dsb_dewake_scanline() Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Enable all DSB error/fault interrupts so that we can see if anything goes terribly wrong. v2: Pass intel_display to DISPLAY_VER() (Jani) Drop extra '/' from drm_err() for consistency v3: Reorder the irq handler a bit Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: -
Jani Nikula authored
Prefer the struct drm_edid based functions for allocating the EDID and updating the connector. Reviewed-by:
-
Jani Nikula authored
Prefer the struct drm_edid based functions for storing the EDID and updating the connector. Reviewed-by:
-
Jani Nikula authored
Prefer the struct drm_edid based functions for reading the EDID and updating the connector. Acked-by:
Thierry Reding <treding@nvidia.com> Reviewed-by:
-
Jani Nikula authored
Prefer the struct drm_edid based functions for reading the EDID and updating the connector. The functional change is that the CEC physical address gets invalidated when the EDID could not be read. v2: Use drm_edid_read() instead of drm_edid_read_ddc() (Sima) Reviewed-by:
-
Ville Syrjälä authored
On ilk/snb the pipe may be configured to place the LUT before or after the CSC depending on various factors, but as there is only one LUT (no split mode like on IVB+) we only advertise a gamma_lut and no degamma_lut in the uapi to avoid confusing userspace. This can cause a problem during readout if the VBIOS/GOP enabled the LUT in the pre CSC configuration. The current code blindly assigns the results of the readout to the degamma_lut, which will cause a failure during the next atomic_check() as we aren't expecting anything to be in degamma_lut since it's not visible to userspace. Fix the problem by assigning whatever LUT we read out from the hardware into gamma_lut. Cc: stable@vger.kernel.org Fixes: d2559299 ("drm/i915: Make ilk_read_luts() capable of degamma readout") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11608Signed-off-by:
Uma Shankar <uma.shankar@intel.com>
-
Abhishek Tamboli authored
Replace deprecated 'mipi_dsi_dcs_write_seq()' macro to 'mipi_dsi_dcs_write_seq_multi' macro in panel_nv3051d_init_sequence function. Signed-off-by:
Abhishek Tamboli <abhishektamboli9@gmail.com> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240827152504.30586-1-abhishektamboli9@gmail.comSigned-off-by:
-
Tejas Vipin authored
Changes the novatek-nt35950 panel to use multi style functions for improved error handling. Reviewed-by:
Tejas Vipin <tejasvipin76@gmail.com> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20240828182210.565861-1-tejasvipin76@gmail.comSigned-off-by:
-
Neil Armstrong authored
Switch to devm_regulator_bulk_get_const() to stop setting the supplies list in probe(), and move the regulator_bulk_data struct in static const. Reviewed-by:
-
Neil Armstrong authored
Make usage of the new _multi() mipi_dsi functions instead of the deprecated macros, improving error handling and printing. bloat-o-meter gives a 12% gain on arm64: Function old new delta visionox_vtdr6130_unprepare 208 204 -4 visionox_vtdr6130_prepare 1192 896 -296 Total: Before=2348, After=2048, chg -12.78% Reviewed-by:
-
Jani Nikula authored
Instead of just smashing jiffies into a GUID, use guid_gen() to generate RFC 4122 compliant GUIDs. Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Acked-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240812122312.1567046-3-jani.nikula@intel.comSigned-off-by:
-
Jani Nikula authored
Instead of just smashing jiffies into a GUID, use guid_gen() to generate RFC 4122 compliant GUIDs. Reviewed-by:
-
Jani Nikula authored
The kernel has a guid_t type for GUIDs. Switch to using it, but avoid any functional changes here. Reviewed-by:
-
- 28 Aug, 2024 12 commits
-
-
Balasubramani Vivekanandan authored
Battlemage platform is sufficiently tested and found stable. CI is also pretty stable. Remove the force_probe requirement to enable the platform support by default. Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240828082152.3194814-1-balasubramani.vivekanandan@intel.comSigned-off-by:
-
Himal Prasad Ghimiray authored
Make sure that ggtt_node_remove() is invoked only if both node and ggtt are not null. Move the null checks to the caller function xe_ggtt_node_remove(). v2: Move null check below declarations (Tejas) Fixes: 919bb54e ("drm/xe: Fix missing runtime outer protection for ggtt_remove_node") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Tejas Upadhyay <tejas.upadhyay@intel.com> Reviewed-by:
Tejas Upadhyay <tejas.upadhyay@intel.com> Signed-off-by:
Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240828092229.3606503-1-himal.prasad.ghimiray@intel.comSigned-off-by:
-
Thorsten Blum authored
The function parameter out can be used directly instead of assigning it to a temporary u64 variable first. Remove the local variable tmp2 and use the parameter out directly as the divisor in do_div() to remove the following Coccinelle/coccicheck warning reported by do_div.cocci: WARNING: do_div() does a 64-by-32 division, please consider using div64_u64 instead Signed-off-by:
Thorsten Blum <thorsten.blum@toblux.com> Signed-off-by:
-
Ulf Hansson authored
Rather than hooking up the PM domains through devm_pm_opp_attach_genpd() and manage the device-link, let's avoid the boilerplate-code by converting into dev_pm_domain_attach|detach_list. Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Lu Baolu authored
An iommu domain is allocated in host1x_iommu_attach() and is attached to host->dev. Use iommu_paging_domain_alloc() to make it explicit. Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by:
Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20240610085555.88197-8-baolu.lu@linux.intel.comSigned-off-by:
-
Mikko Perttunen authored
Syncpoint IRQs are currently requested in a code path that runs during resume. Due to this, we get multiple overlapping registered interrupt handlers as host1x is suspended and resumed. Rearrange interrupt code to only request IRQs during initialization. Signed-off-by:
Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by:
-
Vignesh Raman authored
Set the timeout of all drm-ci jobs to 1h30m since some jobs takes more than 1 hour to complete. Signed-off-by:
Vignesh Raman <vignesh.raman@collabora.com> Acked-by:
Helen Koike <helen.koike@collabora.com> Acked-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
Neil Armstrong authored
Add support for the 1200x1920 BOE TV101WUM-LL2 DSI Display Panel found in the Lenovo Smart Tab M10 tablet. The controller is unknown. Reviewed-by:
-
Neil Armstrong authored
Document the 1200x1920 BOE TV101WUM-LL2 DSI Display Panel found in the Lenovo Smart Tab M10 tablet. The controller is unknown. Reviewed-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240828-topic-sdm450-upstream-tbx605f-panel-v3-1-b792f93e1d6b@linaro.orgSigned-off-by:
-
Melissa Wen authored
I haven't been able to follow or review the work on the driver for some time now and I don't see the situation improving anytime soon. I'd like to continue being listed as a reviewer. Signed-off-by:
Melissa Wen <melissa.srw@gmail.com> Acked-by:
Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240525142637.82586-1-melissa.srw@gmail.com
-
Thomas Hellström authored
For non-d3cold-capable devices we'd like to be able to wake up the device from reclaim. In particular, for Lunar Lake we'd like to be able to blit CCS metadata to system at shrink time; at least from kswapd where it's reasonable OK to wait for rpm resume and a preceding rpm suspend. Therefore use a separate lockdep map for such devices and prime it reclaim-tainted. v2: - Rename lockmap acquire- and release functions. (Rodrigo Vivi). - Reinstate the old xe_pm_runtime_lockdep_prime() function and rename it to xe_rpm_might_enter_cb(). (Matthew Auld). - Introduce a separate xe_pm_runtime_lockdep_prime function called from module init for known required locking orders. v3: - Actually hook up the prime function at module init. v4: - Rebase. v5: - Don't use reclaim-safe RPM with sriov. Cc: "Vivi, Rodrigo" <rodrigo.vivi@intel.com> Cc: "Auld, Matthew" <matthew.auld@intel.com> Signed-off-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240826143450.92511-1-thomas.hellstrom@linux.intel.com
-
Nirmoy Das authored
Remove TTM_TT_FLAG_CLEARED_ON_FREE now that XE stopped using this flag. This reverts commit decbfaf0. Cc: Christian König <christian.koenig@amd.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by:
Nirmoy Das <nirmoy.das@intel.com> Reviewed-by:
-
