- 24 Oct, 2022 5 commits
-
-
Ioana Ciornei authored
Export the allocated buffer pools, the number of buffers that they have currently and which channels are using which BP. The output looks like below: Buffer pool info for eth2: IDX BPID Buf count CH#0 CH#1 CH#2 CH#3 BP#0 1 5124 x x x x Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana Ciornei authored
Just give out an index for each channel that we export into the debug file in the form of CH#<index>. This is purely to help corelate each channel information from one debugfs file to another one. Signed-off-by:
-
Robert-Ionut Alexa authored
This patch allows the configuration of multiple buffer pools associated with a single DPNI object, each distinct DPBP object not necessarily shared among all queues. The user can interogate both the number of buffer pools and the buffer count in each buffer pool by using the .get_ethtool_stats() callback. Signed-off-by:
Robert-Ionut Alexa <robert-ionut.alexa@nxp.com> Signed-off-by:
-
Ioana Ciornei authored
Rearrange the variables in the dpaa2_eth_get_ethtool_stats() function so that we adhere to the reverse Christmas tree rule. Also, in the next patch we are adding more variables and I didn't know where to place them with the current ordering. Signed-off-by:
-
Robert-Ionut Alexa authored
The .get_channels() ethtool_ops callback is implemented and exports the number of queues: Rx, Tx, Tx conf and Rx err. The last two ones, Tx confirmation and Rx err, are counted as 'others'. The .set_channels() callback is not implemented since the DPAA2 software/firmware architecture does not allow the dynamic reconfiguration of the number of queues. Signed-off-by:
-
- 21 Oct, 2022 11 commits
-
-
Alexandru Tachici authored
Document GPIO for HW reset. Signed-off-by:
Alexandru Tachici <alexandru.tachici@analog.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Alexandru Tachici authored
Add an optional GPIO to be used for a hardware reset of the IC. Signed-off-by:
-
Jeff Johnson authored
Commit ff6d3658 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for IPA. Signed-off-by:
Jeff Johnson <quic_jjohnson@quicinc.com> Reviewed-by:
Alex Elder <elder@linaro.org> Reviewed-by:
Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by:
-
Doug Berger authored
If a matching flow spec exists its current location is as good as ANY. If not add the new flow spec at the first available location. Signed-off-by:
Doug Berger <opendmb@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221019215123.316997-1-opendmb@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Alexey Kodanev authored
After commit 178ca044 ("sctp: Make sctp_enqueue_event tak an skb list."), skb_list cannot be NULL. Detected using the static analysis tool - Svace. Signed-off-by:
Alexey Kodanev <aleksei.kodanev@bell-sw.com> Reviewed-by:
Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/20221019180735.161388-3-aleksei.kodanev@bell-sw.comSigned-off-by:
-
Alexey Kodanev authored
After commit 013b96ec ("sctp: Pass sk_buff_head explicitly to sctp_ulpq_tail_event().") there is one more unneeded check of skb_list for NULL. Detected using the static analysis tool - Svace. Signed-off-by:
-
Alexey Kodanev authored
'&asoc->ulpq' passed to sctp_ulpq_init() as the first argument, then sctp_qlpq_init() initializes it and eventually returns the address of the struct member back. Therefore, in this case, the return pointer cannot be NULL. Moreover, it seems sctp_ulpq_init() has always been used only in sctp_association_init(), so there's really no need to return ulpq anymore. Detected using the static analysis tool - Svace. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
No conflicts. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from netfilter. Current release - regressions: - revert "net: fix cpu_max_bits_warn() usage in netif_attrmask_next{,_and}" - revert "net: sched: fq_codel: remove redundant resource cleanup in fq_codel_init()" - dsa: uninitialized variable in dsa_slave_netdevice_event() - eth: sunhme: uninitialized variable in happy_meal_init() Current release - new code bugs: - eth: octeontx2: fix resource not freed after malloc Previous releases - regressions: - sched: fix return value of qdisc ingress handling on success - sched: fix race condition in qdisc_graft() - udp: update reuse->has_conns under reuseport_lock. - tls: strp: make sure the TCP skbs do not have overlapping data - hsr: avoid possible NULL deref in skb_clone() - tipc: fix an information leak in tipc_topsrv_kern_subscr - phylink: add mac_managed_pm in phylink_config structure - eth: i40e: fix DMA mappings leak - eth: hyperv: fix a RX-path warning - eth: mtk: fix memory leaks Previous releases - always broken: - sched: cake: fix null pointer access issue when cake_init() fails" * tag 'net-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits) net: phy: dp83822: disable MDI crossover status change interrupt net: sched: fix race condition in qdisc_graft() net: hns: fix possible memory leak in hnae_ae_register() wwan_hwsim: fix possible memory leak in wwan_hwsim_dev_new() sfc: include vport_id in filter spec hash and equal() genetlink: fix kdoc warnings selftests: add selftest for chaining of tc ingress handling to egress net: Fix return value of qdisc ingress handling on success net: sched: sfb: fix null pointer access issue when sfb_init() fails Revert "net: sched: fq_codel: remove redundant resource cleanup in fq_codel_init()" net: sched: cake: fix null pointer access issue when cake_init() fails ethernet: marvell: octeontx2 Fix resource not freed after malloc netfilter: nf_tables: relax NFTA_SET_ELEM_KEY_END set flags requirements netfilter: rpfilter/fib: Set ->flowic_uid correctly for user namespaces. ionic: catch NULL pointer issue on reconfig net: hsr: avoid possible NULL deref in skb_clone() bnxt_en: fix memory leak in bnxt_nvm_test() ip6mr: fix UAF issue in ip6mr_sk_done() when addrconf_init_net() failed udp: Update reuse->has_conns under reuseport_lock. net: ethernet: mediatek: ppe: Remove the unused function mtk_foe_entry_usable() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull ata fixes from Damien Le Moal: "Several minor fixes: - Fix the module alias for the ahci_imx driver to get autoloading to work (Alexander) - Fix a potential array-index-out-of-bounds problem with the enclosure managment support in the ahci driver (Kai-Heng) - Several patches to fix compilation warnings thrown by clang in the ahci_st, sata_rcar, ahci_brcm, ahci_xgene, ahci_imx and ahci_qoriq drivers (me)" * tag 'ata-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: ahci_qoriq: Fix compilation warning ata: ahci_imx: Fix compilation warning ata: ahci_xgene: Fix compilation warning ata: ahci_brcm: Fix compilation warning ata: sata_rcar: Fix compilation warning ata: ahci_st: Fix compilation warning ata: ahci: Match EM_MAX_SLOTS with SATA_PMP_MAX_PORTS ata: ahci-imx: Fix MODULE_ALIAS -
Linus Torvalds authored
Merge tag 'for-6.1/dm-changes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Fix dm-bufio to use test_bit_acquire to properly test_bit on arches with weaker memory ordering. - DM core replace DMWARN with DMERR or DMCRIT for fatal errors. - Enable WQ_HIGHPRI on DM verity target's verify_wq. - Add documentation for DM verity's try_verify_in_tasklet option. - Various typo and redundant word fixes in code and/or comments. * tag 'for-6.1/dm-changes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm clone: Fix typo in block_device format specifier dm: remove unnecessary assignment statement in alloc_dev() dm verity: Add documentation for try_verify_in_tasklet option dm cache: delete the redundant word 'each' in comment dm raid: fix typo in analyse_superblocks code comment dm verity: enable WQ_HIGHPRI on verify_wq dm raid: delete the redundant word 'that' in comment dm: change from DMWARN to DMERR or DMCRIT for fatal errors dm bufio: use the acquire memory barrier when testing for B_READING
-
- 20 Oct, 2022 7 commits
-
-
Kees Cook authored
Instead of discovering the kmalloc bucket size _after_ allocation, round up proactively so the allocation is explicitly made for the full size, allowing the compiler to correctly reason about the resulting size of the buffer through the existing __alloc_size() hint. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Reviewed-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20221018092724.give.735-kees@kernel.orgSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Felix Riemann authored
If the cable is disconnected the PHY seems to toggle between MDI and MDI-X modes. With the MDI crossover status interrupt active this causes roughly 10 interrupts per second. As the crossover status isn't checked by the driver, the interrupt can be disabled to reduce the interrupt load. Fixes: 87461f7a ("net: phy: DP83822 initial driver submission") Signed-off-by:
Felix Riemann <felix.riemann@sma.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221018104755.30025-1-svc.sw.rte.linux@sma.deSigned-off-by:
-
Eric Dumazet authored
We had one syzbot report [1] in syzbot queue for a while. I was waiting for more occurrences and/or a repro but Dmitry Vyukov spotted the issue right away. <quoting Dmitry> qdisc_graft() drops reference to qdisc in notify_and_destroy while it's still assigned to dev->qdisc </quoting> Indeed, RCU rules are clear when replacing a data structure. The visible pointer (dev->qdisc in this case) must be updated to the new object _before_ RCU grace period is started (qdisc_put(old) in this case). [1] BUG: KASAN: use-after-free in __tcf_qdisc_find.part.0+0xa3a/0xac0 net/sched/cls_api.c:1066 Read of size 4 at addr ffff88802065e038 by task syz-executor.4/21027 CPU: 0 PID: 21027 Comm: syz-executor.4 Not tainted 6.0.0-rc3-syzkaller-00363-g7726d4c3 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:317 [inline] print_report.cold+0x2ba/0x719 mm/kasan/report.c:433 kasan_report+0xb1/0x1e0 mm/kasan/report.c:495 __tcf_qdisc_find.part.0+0xa3a/0xac0 net/sched/cls_api.c:1066 __tcf_qdisc_find net/sched/cls_api.c:1051 [inline] tc_new_tfilter+0x34f/0x2200 net/sched/cls_api.c:2018 rtnetlink_rcv_msg+0x955/0xca0 net/core/rtnetlink.c:6081 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2482 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2536 __sys_sendmsg+0xf3/0x1c0 net/socket.c:2565 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f5efaa89279 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f5efbc31168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f5efab9bf80 RCX: 00007f5efaa89279 RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000005 RBP: 00007f5efaae32e9 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f5efb0cfb1f R14: 00007f5efbc31300 R15: 0000000000022000 </TASK> Allocated by task 21027: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:45 [inline] set_alloc_info mm/kasan/common.c:437 [inline] ____kasan_kmalloc mm/kasan/common.c:516 [inline] ____kasan_kmalloc mm/kasan/common.c:475 [inline] __kasan_kmalloc+0xa9/0xd0 mm/kasan/common.c:525 kmalloc_node include/linux/slab.h:623 [inline] kzalloc_node include/linux/slab.h:744 [inline] qdisc_alloc+0xb0/0xc50 net/sched/sch_generic.c:938 qdisc_create_dflt+0x71/0x4a0 net/sched/sch_generic.c:997 attach_one_default_qdisc net/sched/sch_generic.c:1152 [inline] netdev_for_each_tx_queue include/linux/netdevice.h:2437 [inline] attach_default_qdiscs net/sched/sch_generic.c:1170 [inline] dev_activate+0x760/0xcd0 net/sched/sch_generic.c:1229 __dev_open+0x393/0x4d0 net/core/dev.c:1441 __dev_change_flags+0x583/0x750 net/core/dev.c:8556 rtnl_configure_link+0xee/0x240 net/core/rtnetlink.c:3189 rtnl_newlink_create net/core/rtnetlink.c:3371 [inline] __rtnl_newlink+0x10b8/0x17e0 net/core/rtnetlink.c:3580 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3593 rtnetlink_rcv_msg+0x43a/0xca0 net/core/rtnetlink.c:6090 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2482 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2536 __sys_sendmsg+0xf3/0x1c0 net/socket.c:2565 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 21020: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track+0x21/0x30 mm/kasan/common.c:45 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370 ____kasan_slab_free mm/kasan/common.c:367 [inline] ____kasan_slab_free+0x166/0x1c0 mm/kasan/common.c:329 kasan_slab_free include/linux/kasan.h:200 [inline] slab_free_hook mm/slub.c:1754 [inline] slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1780 slab_free mm/slub.c:3534 [inline] kfree+0xe2/0x580 mm/slub.c:4562 rcu_do_batch kernel/rcu/tree.c:2245 [inline] rcu_core+0x7b5/0x1890 kernel/rcu/tree.c:2505 __do_softirq+0x1d3/0x9c6 kernel/softirq.c:571 Last potentially related work creation: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 __kasan_record_aux_stack+0xbe/0xd0 mm/kasan/generic.c:348 call_rcu+0x99/0x790 kernel/rcu/tree.c:2793 qdisc_put+0xcd/0xe0 net/sched/sch_generic.c:1083 notify_and_destroy net/sched/sch_api.c:1012 [inline] qdisc_graft+0xeb1/0x1270 net/sched/sch_api.c:1084 tc_modify_qdisc+0xbb7/0x1a00 net/sched/sch_api.c:1671 rtnetlink_rcv_msg+0x43a/0xca0 net/core/rtnetlink.c:6090 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2482 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2536 __sys_sendmsg+0xf3/0x1c0 net/socket.c:2565 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Second to last potentially related work creation: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 __kasan_record_aux_stack+0xbe/0xd0 mm/kasan/generic.c:348 kvfree_call_rcu+0x74/0x940 kernel/rcu/tree.c:3322 neigh_destroy+0x431/0x630 net/core/neighbour.c:912 neigh_release include/net/neighbour.h:454 [inline] neigh_cleanup_and_release+0x1f8/0x330 net/core/neighbour.c:103 neigh_del net/core/neighbour.c:225 [inline] neigh_remove_one+0x37d/0x460 net/core/neighbour.c:246 neigh_forced_gc net/core/neighbour.c:276 [inline] neigh_alloc net/core/neighbour.c:447 [inline] ___neigh_create+0x18b5/0x29a0 net/core/neighbour.c:642 ip6_finish_output2+0xfb8/0x1520 net/ipv6/ip6_output.c:125 __ip6_finish_output net/ipv6/ip6_output.c:195 [inline] ip6_finish_output+0x690/0x1160 net/ipv6/ip6_output.c:206 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip6_output+0x1ed/0x540 net/ipv6/ip6_output.c:227 dst_output include/net/dst.h:451 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] mld_sendpack+0xa09/0xe70 net/ipv6/mcast.c:1820 mld_send_cr net/ipv6/mcast.c:2121 [inline] mld_ifc_work+0x71c/0xdc0 net/ipv6/mcast.c:2653 process_one_work+0x991/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e4/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 The buggy address belongs to the object at ffff88802065e000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 56 bytes inside of 1024-byte region [ffff88802065e000, ffff88802065e400) The buggy address belongs to the physical page: page:ffffea0000819600 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x20658 head:ffffea0000819600 order:3 compound_mapcount:0 compound_pincount:0 flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000010200 0000000000000000 dead000000000001 ffff888011841dc0 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 3523, tgid 3523 (sshd), ts 41495190986, free_ts 41417713212 prep_new_page mm/page_alloc.c:2532 [inline] get_page_from_freelist+0x109b/0x2ce0 mm/page_alloc.c:4283 __alloc_pages+0x1c7/0x510 mm/page_alloc.c:5515 alloc_pages+0x1a6/0x270 mm/mempolicy.c:2270 alloc_slab_page mm/slub.c:1824 [inline] allocate_slab+0x27e/0x3d0 mm/slub.c:1969 new_slab mm/slub.c:2029 [inline] ___slab_alloc+0x7f1/0xe10 mm/slub.c:3031 __slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3118 slab_alloc_node mm/slub.c:3209 [inline] __kmalloc_node_track_caller+0x2f2/0x380 mm/slub.c:4955 kmalloc_reserve net/core/skbuff.c:358 [inline] __alloc_skb+0xd9/0x2f0 net/core/skbuff.c:430 alloc_skb_fclone include/linux/skbuff.h:1307 [inline] tcp_stream_alloc_skb+0x38/0x580 net/ipv4/tcp.c:861 tcp_sendmsg_locked+0xc36/0x2f80 net/ipv4/tcp.c:1325 tcp_sendmsg+0x2b/0x40 net/ipv4/tcp.c:1483 inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:819 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 sock_write_iter+0x291/0x3d0 net/socket.c:1108 call_write_iter include/linux/fs.h:2187 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x9e9/0xdd0 fs/read_write.c:578 ksys_write+0x1e8/0x250 fs/read_write.c:631 page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1449 [inline] free_pcp_prepare+0x5e4/0xd20 mm/page_alloc.c:1499 free_unref_page_prepare mm/page_alloc.c:3380 [inline] free_unref_page+0x19/0x4d0 mm/page_alloc.c:3476 __unfreeze_partials+0x17c/0x1a0 mm/slub.c:2548 qlink_free mm/kasan/quarantine.c:168 [inline] qlist_free_all+0x6a/0x170 mm/kasan/quarantine.c:187 kasan_quarantine_reduce+0x180/0x200 mm/kasan/quarantine.c:294 __kasan_slab_alloc+0xa2/0xc0 mm/kasan/common.c:447 kasan_slab_alloc include/linux/kasan.h:224 [inline] slab_post_alloc_hook mm/slab.h:727 [inline] slab_alloc_node mm/slub.c:3243 [inline] slab_alloc mm/slub.c:3251 [inline] __kmem_cache_alloc_lru mm/slub.c:3258 [inline] kmem_cache_alloc+0x267/0x3b0 mm/slub.c:3268 kmem_cache_zalloc include/linux/slab.h:723 [inline] alloc_buffer_head+0x20/0x140 fs/buffer.c:2974 alloc_page_buffers+0x280/0x790 fs/buffer.c:829 create_empty_buffers+0x2c/0xee0 fs/buffer.c:1558 ext4_block_write_begin+0x1004/0x1530 fs/ext4/inode.c:1074 ext4_da_write_begin+0x422/0xae0 fs/ext4/inode.c:2996 generic_perform_write+0x246/0x560 mm/filemap.c:3738 ext4_buffered_write_iter+0x15b/0x460 fs/ext4/file.c:270 ext4_file_write_iter+0x44a/0x1660 fs/ext4/file.c:679 call_write_iter include/linux/fs.h:2187 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x9e9/0xdd0 fs/read_write.c:578 Fixes: af356afa ("net_sched: reintroduce dev->qdisc for use by sch_api") Reported-by:
syzbot <syzkaller@googlegroups.com> Diagnosed-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20221018203258.2793282-1-edumazet@google.comSigned-off-by:
-
Yang Yingliang authored
Inject fault while probing module, if device_register() fails, but the refcount of kobject is not decreased to 0, the name allocated in dev_set_name() is leaked. Fix this by calling put_device(), so that name can be freed in callback function kobject_cleanup(). unreferenced object 0xffff00c01aba2100 (size 128): comm "systemd-udevd", pid 1259, jiffies 4294903284 (age 294.152s) hex dump (first 32 bytes): 68 6e 61 65 30 00 00 00 18 21 ba 1a c0 00 ff ff hnae0....!...... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000034783f26>] slab_post_alloc_hook+0xa0/0x3e0 [<00000000748188f2>] __kmem_cache_alloc_node+0x164/0x2b0 [<00000000ab0743e8>] __kmalloc_node_track_caller+0x6c/0x390 [<000000006c0ffb13>] kvasprintf+0x8c/0x118 [<00000000fa27bfe1>] kvasprintf_const+0x60/0xc8 [<0000000083e10ed7>] kobject_set_name_vargs+0x3c/0xc0 [<000000000b87affc>] dev_set_name+0x7c/0xa0 [<000000003fd8fe26>] hnae_ae_register+0xcc/0x190 [hnae] [<00000000fe97edc9>] hns_dsaf_ae_init+0x9c/0x108 [hns_dsaf] [<00000000c36ff1eb>] hns_dsaf_probe+0x548/0x748 [hns_dsaf] Fixes: 6fe6611f ("net: add Hisilicon Network Subsystem hnae framework support") Signed-off-by:Yang Yingliang <yangyingliang@huawei.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20221018122451.1749171-1-yangyingliang@huawei.comSigned-off-by:
-
Yang Yingliang authored
Inject fault while probing module, if device_register() fails, but the refcount of kobject is not decreased to 0, the name allocated in dev_set_name() is leaked. Fix this by calling put_device(), so that name can be freed in callback function kobject_cleanup(). unreferenced object 0xffff88810152ad20 (size 8): comm "modprobe", pid 252, jiffies 4294849206 (age 22.713s) hex dump (first 8 bytes): 68 77 73 69 6d 30 00 ff hwsim0.. backtrace: [<000000009c3504ed>] __kmalloc_node_track_caller+0x44/0x1b0 [<00000000c0228a5e>] kvasprintf+0xb5/0x140 [<00000000cff8c21f>] kvasprintf_const+0x55/0x180 [<0000000055a1e073>] kobject_set_name_vargs+0x56/0x150 [<000000000a80b139>] dev_set_name+0xab/0xe0 Fixes: f36a111a ("wwan_hwsim: WWAN device simulator") Signed-off-by:Loic Poulain <loic.poulain@linaro.org> Acked-by:
Sergey Ryazanov <ryazanov.s.a@gmail.com> Link: https://lore.kernel.org/r/20221018131607.1901641-1-yangyingliang@huawei.comSigned-off-by:
-
Pieter Jansen van Vuuren authored
Filters on different vports are qualified by different implicit MACs and/or VLANs, so shouldn't be considered equal even if their other match fields are identical. Fixes: 7c460d9b ("sfc: Extend and abstract efx_filter_spec to cover Huntington/EF10") Co-developed-by:
Edward Cree <ecree.xilinx@gmail.com> Signed-off-by:
Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Reviewed-by:
Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/20221018092841.32206-1-pieter.jansen-van-vuuren@amd.comSigned-off-by:
-
Kees Cook authored
Round up allocations with kmalloc_size_roundup() so that openvswitch's use of ksize() is always accurate and no special handling of the memory is needed by KASAN, UBSAN_BOUNDS, nor FORTIFY_SOURCE. Cc: Pravin B Shelar <pshelar@ovn.org> Cc: dev@openvswitch.org Signed-off-by:
-
- 19 Oct, 2022 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Missing flowi uid field in nft_fib expression, from Guillaume Nault. This is broken since the creation of the fib expression. 2) Relax sanity check to fix bogus EINVAL error when deleting elements belonging set intervals. Broken since 6.0-rc. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: relax NFTA_SET_ELEM_KEY_END set flags requirements netfilter: rpfilter/fib: Set ->flowic_uid correctly for user namespaces. ==================== Link: https://lore.kernel.org/r/20221019065225.1006344-1-pablo@netfilter.orgSigned-off-by:
-
Jakub Kicinski authored
Address a bunch of kdoc warnings: include/net/genetlink.h:81: warning: Function parameter or member 'module' not described in 'genl_family' include/net/genetlink.h:243: warning: expecting prototype for struct genl_info. Prototype was for struct genl_dumpit_info instead include/net/genetlink.h:419: warning: Function parameter or member 'net' not described in 'genlmsg_unicast' include/net/genetlink.h:438: warning: expecting prototype for gennlmsg_data(). Prototype was for genlmsg_data() instead include/net/genetlink.h:244: warning: Function parameter or member 'op' not described in 'genl_dumpit_info' Link: https://lore.kernel.org/r/20221018231310.1040482-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Edward Cree says: ==================== netlink: formatted extacks Currently, netlink extacks can only carry fixed string messages, which is limiting when reporting failures in complex systems. This series adds the ability to return printf-formatted messages, and uses it in the sfc driver's TC offload code. Formatted extack messages are limited in length to a fixed buffer size, currently 80 characters. If the message exceeds this, the full message will be logged (ratelimited) to the console and a truncated version returned over netlink. There is no change to the netlink uAPI; only internal kernel changes are needed. ==================== Link: https://lore.kernel.org/r/cover.1666102698.git.ecree.xilinx@gmail.comSigned-off-by:
-
Edward Cree authored
It no longer does anything now that we're using formatted extacks instead. So we can remove the driver's whole get/set priv_flags implementation. Signed-off-by:
-
Edward Cree authored
Since we can now get a formatted message back to the user with NL_SET_ERR_MSG_FMT_MOD(), there's no need for our special logging. Signed-off-by:
-
Edward Cree authored
Include an 80-byte buffer in struct netlink_ext_ack that can be used for scnprintf()ed messages. This does mean that the resulting string can't be enumerated, translated etc. in the way NL_SET_ERR_MSG() was designed to allow. Signed-off-by:
-
Alexandru Tachici authored
No need to use more than one SPI transfer for reads. Use only one from now as ADIN1110/2111 does not tolerate CS changes during reads. The BCM2711/2708 SPI controllers worked fine, but the NXP IMX8MM could not keep CS lowered during SPI bursts. This change aims to make the ADIN1110/2111 driver compatible with both SPI controllers, without any loss of bandwidth/other capabilities. Fixes: bc93e19d ("net: ethernet: adi: Add ADIN1110 support") Signed-off-by:
-
David S. Miller authored
Paul Blakey says: ==================== net: Fix return value of qdisc ingress handling on success Fix patch + self-test with the currently broken scenario. v4->v3: Removed new line in self test and rebase (Paolo). v2->v3: Added DROP return to TC_ACT_SHOT case (Cong). v1->v2: Changed blamed commit Added self-test ==================== Signed-off-by: -
Paul Blakey authored
This test runs a simple ingress tc setup between two veth pairs, then adds a egress->ingress rule to test the chaining of tc ingress pipeline to tc egress piepline. Signed-off-by:
Paul Blakey <paulb@nvidia.com> Signed-off-by:
-
Paul Blakey authored
Currently qdisc ingress handling (sch_handle_ingress()) doesn't set a return value and it is left to the old return value of the caller (__netif_receive_skb_core()) which is RX drop, so if the packet is consumed, caller will stop and return this value as if the packet was dropped. This causes a problem in the kernel tcp stack when having a egress tc rule forwarding to a ingress tc rule. The tcp stack sending packets on the device having the egress rule will see the packets as not successfully transmitted (although they actually were), will not advance it's internal state of sent data, and packets returning on such tcp stream will be dropped by the tcp stack with reason ack-of-unsent-data. See reproduction in [0] below. Fix that by setting the return value to RX success if the packet was handled successfully. [0] Reproduction steps: $ ip link add veth1 type veth peer name peer1 $ ip link add veth2 type veth peer name peer2 $ ifconfig peer1 5.5.5.6/24 up $ ip netns add ns0 $ ip link set dev peer2 netns ns0 $ ip netns exec ns0 ifconfig peer2 5.5.5.5/24 up $ ifconfig veth2 0 up $ ifconfig veth1 0 up #ingress forwarding veth1 <-> veth2 $ tc qdisc add dev veth2 ingress $ tc qdisc add dev veth1 ingress $ tc filter add dev veth2 ingress prio 1 proto all flower \ action mirred egress redirect dev veth1 $ tc filter add dev veth1 ingress prio 1 proto all flower \ action mirred egress redirect dev veth2 #steal packet from peer1 egress to veth2 ingress, bypassing the veth pipe $ tc qdisc add dev peer1 clsact $ tc filter add dev peer1 egress prio 20 proto ip flower \ action mirred ingress redirect dev veth1 #run iperf and see connection not running $ iperf3 -s& $ ip netns exec ns0 iperf3 -c 5.5.5.6 -i 1 #delete egress rule, and run again, now should work $ tc filter del dev peer1 egress $ ip netns exec ns0 iperf3 -c 5.5.5.6 -i 1 Fixes: f697c3e8 ("[NET]: Avoid unnecessary cloning for ingress filtering") Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== bridge: A few multicast cleanups Clean up a few issues spotted while working on the bridge multicast code and running its selftests. ==================== Signed-off-by: -
Ido Schimmel authored
Before creating a new MDB entry, br_multicast_new_group() will call br_mdb_ip_get() to see if one exists and return it if so. Therefore, simply call br_multicast_new_group() and omit the call to br_mdb_ip_get(). Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Acked-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
-
Ido Schimmel authored
IGMPv3 / MLDv2 Membership Reports are only processed from the data path with softIRQ disabled, so there is no need to call spin_lock_bh(). Use spin_lock() instead. This is consistent with how other IGMP / MLD packets are processed. Signed-off-by:
-
Ido Schimmel authored
The test group address is added and removed in v2reportleave_test(). There is no need to delete it again during cleanup as it results in the following error message: # bash -x ./bridge_igmp.sh [...] + cleanup + pre_cleanup [...] + ip address del dev swp4 239.10.10.10/32 RTNETLINK answers: Cannot assign requested address + h2_destroy Solve by removing the unnecessary address deletion. Signed-off-by:
-
Ido Schimmel authored
The qdiscs are added during setup, but not deleted during cleanup, resulting in the following error messages: # ./bridge_vlan_mcast.sh [...] # ./bridge_vlan_mcast.sh Error: Exclusivity flag on, cannot modify. Error: Exclusivity flag on, cannot modify. Solve by deleting the qdiscs during cleanup. Signed-off-by:
-
David S. Miller authored
Zhengchao Shao says: ==================== net: fix null pointer access issue in qdisc These three patches fix the same type of problem. Set the default qdisc, and then construct an init failure scenario when the dev qdisc is configured on mqprio to trigger the reset process. NULL pointer access may occur during the reset process. --- v2: for fq_codel, revert the patch --- ==================== Signed-off-by: -
Zhengchao Shao authored
When the default qdisc is sfb, if the qdisc of dev_queue fails to be inited during mqprio_init(), sfb_reset() is invoked to clear resources. In this case, the q->qdisc is NULL, and it will cause gpf issue. The process is as follows: qdisc_create_dflt() sfb_init() tcf_block_get() --->failed, q->qdisc is NULL ... qdisc_put() ... sfb_reset() qdisc_reset(q->qdisc) --->q->qdisc is NULL ops = qdisc->ops The following is the Call Trace information: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] RIP: 0010:qdisc_reset+0x2b/0x6f0 Call Trace: <TASK> sfb_reset+0x37/0xd0 qdisc_reset+0xed/0x6f0 qdisc_destroy+0x82/0x4c0 qdisc_put+0x9e/0xb0 qdisc_create_dflt+0x2c3/0x4a0 mqprio_init+0xa71/0x1760 qdisc_create+0x3eb/0x1000 tc_modify_qdisc+0x408/0x1720 rtnetlink_rcv_msg+0x38e/0xac0 netlink_rcv_skb+0x12d/0x3a0 netlink_unicast+0x4a2/0x740 netlink_sendmsg+0x826/0xcc0 sock_sendmsg+0xc5/0x100 ____sys_sendmsg+0x583/0x690 ___sys_sendmsg+0xe8/0x160 __sys_sendmsg+0xbf/0x160 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f2164122d04 </TASK> Fixes: e13e02a3 ("net_sched: SFB flow scheduler") Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by:
-
