- 27 Feb, 2019 36 commits
-
-
Talons Lee authored
[ Upstream commit 5268c8f3 ] Commit e657fccb clears cpu capability bit instead of using fake cpuid value, the EXTD should always be off for PV guest without depending on cpuid value. So remove the cpuid check in xen_read_msr_safe() to always clear the X2APIC_ENABLE bit. Signed-off-by:
Talons Lee <xin.li@citrix.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Manish Rangankar authored
[ Upstream commit 34a2ce88 ] When the driver finds invalid destination MAC for the first un-reachable target, and before completes the PATH_REQ operation, set new ep_state to OFFLDCONN_NONE so that as part of driver ep_poll mechanism, the upper open-iscsi layer is notified to complete the login process on the first un-reachable target and thus proceed login to other reachable targets. Signed-off-by:
Manish Rangankar <mrangankar@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Stanley Chu authored
[ Upstream commit ce9e7bce ] hba->is_sys_suspended is set after successful system suspend but not clear after successful system resume. According to current behavior, hba->is_sys_suspended will not be set if host is runtime-suspended but not system-suspended. Thus we shall aligh the same policy: clear this flag even if host remains runtime-suspended after ufshcd_system_resume is successfully returned. Simply fix this flag to correct host status logs. Signed-off-by:
Stanley Chu <stanley.chu@mediatek.com> Reviewed-by:
Avri Altman <avri.altman@wdc.com> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit 2ff33d66 ] The functions isdn_tty_tiocmset() and isdn_tty_set_termios() may be concurrently executed. isdn_tty_tiocmset isdn_tty_modem_hup line 719: kfree(info->dtmf_state); line 721: kfree(info->silence_state); line 723: kfree(info->adpcms); line 725: kfree(info->adpcmr); isdn_tty_set_termios isdn_tty_modem_hup line 719: kfree(info->dtmf_state); line 721: kfree(info->silence_state); line 723: kfree(info->adpcms); line 725: kfree(info->adpcmr); Thus, some concurrency double-free bugs may occur. These possible bugs are found by a static tool written by myself and my manual code review. To fix these possible bugs, the mutex lock "modem_info_mutex" used in isdn_tty_tiocmset() is added in isdn_tty_set_termios(). Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jose Abreu authored
[ Upstream commit 6dea7e18 ] Since commit b7d0f08e, the enable / disable of PCI device is not managed which will result in IO regions not being automatically unmapped. As regions continue mapped it is currently not possible to remove and then probe again the PCI module of stmmac. Fix this by manually unmapping regions on remove callback. Changes from v1: - Fix build error Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Fixes: b7d0f08e ("net: stmmac: Fix WoL for PCI-based setups") Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
-
Yuchung Cheng authored
[ Upstream commit 31aa6503 ] The existing BPF TCP initial congestion window (TCP_BPF_IW) does not to work on (active) Fast Open sender. This is because it changes the (initial) window only if data_segs_out is zero -- but data_segs_out is also incremented on SYN-data. This patch fixes the issue by proerly accounting for SYN-data additionally. Fixes: fc747810 ("bpf: Adds support for setting initial cwnd") Signed-off-by:
Yuchung Cheng <ycheng@google.com> Reviewed-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Lawrence Brakmo <brakmo@fb.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Thomas Bogendoerfer authored
[ Upstream commit 41af167f ] 64bit JAZZ builds failed with linux-next/arch/mips/jazz/jazzdma.c: In function `vdma_init`: /linux-next/arch/mips/jazz/jazzdma.c:77:30: error: implicit declaration of function `KSEG1ADDR`; did you mean `CKSEG1ADDR`? [-Werror=implicit-function-declaration] pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl); ^~~~~~~~~ CKSEG1ADDR /linux-next/arch/mips/jazz/jazzdma.c:77:10: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl); ^ In file included from /linux-next/arch/mips/include/asm/barrier.h:11:0, from /linux-next/include/linux/compiler.h:248, from /linux-next/include/linux/kernel.h:10, from /linux-next/arch/mips/jazz/jazzdma.c:11: /linux-next/arch/mips/include/asm/addrspace.h:41:29: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] #define _ACAST32_ (_ATYPE_)(_ATYPE32_) /* widen if necessary */ ^ /linux-next/arch/mips/include/asm/addrspace.h:53:25: note: in expansion of macro `_ACAST32_` #define CPHYSADDR(a) ((_ACAST32_(a)) & 0x1fffffff) ^~~~~~~~~ /linux-next/arch/mips/jazz/jazzdma.c:84:44: note: in expansion of macro `CPHYSADDR` r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE, CPHYSADDR(pgtbl)); Using correct casts and CKSEG1ADDR when dealing with the pgtbl setup fixes this. Signed-off-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by:
Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Logan Gunthorpe authored
[ Upstream commit cc29a1b0 ] scsi_mq_setup_tags(), which is called by scsi_add_host(), calculates the command size to allocate based on the prot_capabilities. In the isci driver, scsi_host_set_prot() is called after scsi_add_host() so the command size gets calculated to be smaller than it needs to be. Eventually, scsi_mq_init_request() locates the 'prot_sdb' after the command assuming it was sized correctly and a buffer overrun may occur. However, seeing blk_mq_alloc_rqs() rounds up to the nearest cache line size, the mistake can go unnoticed. The bug was noticed after the struct request size was reduced by commit 9d037ad7 ("block: remove req->timeout_list") Which likely reduced the allocated space for the request by an entire cache line, enough that the overflow could be hit and it caused a panic, on boot, at: RIP: 0010:t10_pi_complete+0x77/0x1c0 Call Trace: <IRQ> sd_done+0xf5/0x340 scsi_finish_command+0xc3/0x120 blk_done_softirq+0x83/0xb0 __do_softirq+0xa1/0x2e6 irq_exit+0xbc/0xd0 call_function_single_interrupt+0xf/0x20 </IRQ> sd_done() would call scsi_prot_sg_count() which reads the number of entities in 'prot_sdb', but seeing 'prot_sdb' is located after the end of the allocated space it reads a garbage number and erroneously calls t10_pi_complete(). To prevent this, the calls to scsi_host_set_prot() are moved into isci_host_alloc() before the call to scsi_add_host(). Out of caution, also move the similar call to scsi_host_set_guard(). Fixes: 3d2d7525 ("[SCSI] isci: T10 DIF support") Link: http://lkml.kernel.org/r/da851333-eadd-163a-8c78-e1f4ec5ec857@deltatee.comSigned-off-by:
Logan Gunthorpe <logang@deltatee.com> Cc: Intel SCU Linux support <intel-linux-scu@intel.com> Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jeff Moyer <jmoyer@redhat.com> Reviewed-by:
Jeff Moyer <jmoyer@redhat.com> Reviewed-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 72b4a046 ] The return code should be check while qla4xxx_copy_from_fwddb_param fails. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
-
Taehee Yoo authored
[ Upstream commit b91d9036 ] There is no code that decreases the reference count of stateful objects in error path of the nft_add_set_elem(). this causes a leak of reference count of stateful objects. Test commands: $nft add table ip filter $nft add counter ip filter c1 $nft add map ip filter m1 { type ipv4_addr : counter \;} $nft add element ip filter m1 { 1 : c1 } $nft add element ip filter m1 { 1 : c1 } $nft delete element ip filter m1 { 1 } $nft delete counter ip filter c1 Result: Error: Could not process rule: Device or resource busy delete counter ip filter c1 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ At the second 'nft add element ip filter m1 { 1 : c1 }', the reference count of the 'c1' is increased then it tries to insert into the 'm1'. but the 'm1' already has same element so it returns -EEXIST. But it doesn't decrease the reference count of the 'c1' in the error path. Due to a leak of the reference count of the 'c1', the 'c1' can't be removed by 'nft delete counter ip filter c1'. Fixes: 8aeff920 ("netfilter: nf_tables: add stateful object reference to set elements") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Alban Bedel authored
[ Upstream commit 565dc8a4 ] CONFIG_SERIAL_OF_PLATFORM is needed to get a working console on the OF boards, enable it in the default config to get a working setup out of the box. Signed-off-by:
Alban Bedel <albeu@free.fr> Signed-off-by:
-
Yonglong Liu authored
[ Upstream commit bb989501 ] When enable SLUB debug, than remove hns_enet_drv module, SLUB debug will identify a use after free bug: [134.189505] Unable to handle kernel paging request at virtual address 006b6b6b6b6b6b6b [134.197553] Mem abort info: [134.200381] ESR = 0x96000004 [134.203487] Exception class = DABT (current EL), IL = 32 bits [134.209497] SET = 0, FnV = 0 [134.212596] EA = 0, S1PTW = 0 [134.215777] Data abort info: [134.218701] ISV = 0, ISS = 0x00000004 [134.222596] CM = 0, WnR = 0 [134.225606] [006b6b6b6b6b6b6b] address between user and kernel address ranges [134.232851] Internal error: Oops: 96000004 [#1] SMP [134.237798] CPU: 21 PID: 27834 Comm: rmmod Kdump: loaded Tainted: G OE 4.19.5-1.2.34.aarch64 #1 [134.247856] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.58 10/24/2018 [134.255181] pstate: 20000005 (nzCv daif -PAN -UAO) [134.260044] pc : hns_ae_put_handle+0x38/0x60 [134.264372] lr : hns_ae_put_handle+0x24/0x60 [134.268700] sp : ffff00001be93c50 [134.272054] x29: ffff00001be93c50 x28: ffff802faaec8040 [134.277442] x27: 0000000000000000 x26: 0000000000000000 [134.282830] x25: 0000000056000000 x24: 0000000000000015 [134.288284] x23: ffff0000096fe098 x22: ffff000001050070 [134.293671] x21: ffff801fb3c044a0 x20: ffff80afb75ec098 [134.303287] x19: ffff80afb75ec098 x18: 0000000000000000 [134.312945] x17: 0000000000000000 x16: 0000000000000000 [134.322517] x15: 0000000000000002 x14: 0000000000000000 [134.332030] x13: dead000000000100 x12: ffff7e02bea3c988 [134.341487] x11: ffff80affbee9e68 x10: 0000000000000000 [134.351033] x9 : 6fffff8000008101 x8 : 0000000000000000 [134.360569] x7 : dead000000000100 x6 : ffff000009579748 [134.370059] x5 : 0000000000210d00 x4 : 0000000000000000 [134.379550] x3 : 0000000000000001 x2 : 0000000000000000 [134.388813] x1 : 6b6b6b6b6b6b6b6b x0 : 0000000000000000 [134.397993] Process rmmod (pid: 27834, stack limit = 0x00000000d474b7fd) [134.408498] Call trace: [134.414611] hns_ae_put_handle+0x38/0x60 [134.422208] hnae_put_handle+0xd4/0x108 [134.429563] hns_nic_dev_remove+0x60/0xc0 [hns_enet_drv] [134.438342] platform_drv_remove+0x2c/0x70 [134.445958] device_release_driver_internal+0x174/0x208 [134.454810] driver_detach+0x70/0xd8 [134.461913] bus_remove_driver+0x64/0xe8 [134.469396] driver_unregister+0x34/0x60 [134.476822] platform_driver_unregister+0x20/0x30 [134.485130] hns_nic_dev_driver_exit+0x14/0x6e4 [hns_enet_drv] [134.494634] __arm64_sys_delete_module+0x238/0x290 struct hnae_handle is a member of struct hnae_vf_cb, so when vf_cb is freed, than use hnae_handle will cause use after free panic. This patch frees vf_cb after hnae_handle used. Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Denis Bolotin authored
[ Upstream commit 46721c3d ] Make sure chain element is updated before ringing the doorbell. Signed-off-by:
Denis Bolotin <dbolotin@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
-
Denis Bolotin authored
[ Upstream commit 2d533a92 ] In PBL chains with non power of 2 page count, the producer is not at the beginning of the chain when index is 0 after a wrap. Therefore, after the producer index wrap around, page index should be calculated more carefully. Signed-off-by:
-
YueHaibing authored
[ Upstream commit 1f8ce09b ] Fixes gcc '-Wunused-but-set-variable' warning: drivers/xen/pvcalls-back.c: In function 'pvcalls_sk_state_change': drivers/xen/pvcalls-back.c:286:28: warning: variable 'intf' set but not used [-Wunused-but-set-variable] It not used since e6587cdb ("pvcalls-back: set -ENOTCONN in pvcalls_conn_back_read") Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 9e28989d ] When mc13xxx_reg_read() fails, "old_adc0" is uninitialized and will contain random value. Further execution uses "old_adc0" even when mc13xxx_reg_read() fails. The fix checks the return value of mc13xxx_reg_read(), and exits the execution when it fails. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Keerthy authored
[ Upstream commit 75d4c5e0 ] Use devm_regmap_add_irq_chip and clean up error path in probe and also the remove function. Reported-by:
Christian Hohnstaedt <Christian.Hohnstaedt@wago.com> Signed-off-by:
Keerthy <j-keerthy@ti.com> Reviewed-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Charles Keepax authored
[ Upstream commit 04c801c1 ] Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
-
Jonathan Marek authored
[ Upstream commit 504e4175 ] This is required as part of the initialization sequence on certain SoCs. If these registers are not initialized, the hardware can be unresponsive. This fixes the driver on apq8060 (HP TouchPad device). Signed-off-by:
Jonathan Marek <jonathan@marek.ca> Signed-off-by:
-
Dien Pham authored
[ Upstream commit b0aff01e ] Because BD9571MWV_DVFS_MONIVDAC is not defined in the volatile table, the physical register value is not updated by regmap and DVFS doesn't work as expected. Fix it! Fixes: d3ea2127 ("mfd: Add ROHM BD9571MWV-M MFD PMIC driver") Signed-off-by:
Dien Pham <dien.pham.ry@renesas.com> [wsa: rebase, add 'Fixes', reword commit message] Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Marek Vasut <marek.vasut@gmail.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 10628e3e ] This function is supposed to return zero on success or negative error codes on error. Unfortunately, there is a bug so it sometimes returns non-zero, positive numbers on success. I noticed this bug during review and I can't test it. It does appear that the return is sometimes propogated back to _regmap_read() where all non-zero returns are treated as failure so this may affect run time. Fixes: 47c16975 ("mfd: Align ab8500 with the abx500 interface") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Nicolas Boichat authored
[ Upstream commit a177276a ] If the PMIC ID is unknown, the current code would call irq_domain_remove and panic, as pmic->irq_domain is only initialized by mt6397_irq_init. Return immediately with an error, if the chip ID is unsupported. Signed-off-by:
Nicolas Boichat <drinkcat@chromium.org> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit a3888f62 ] When building the kernel with Clang, the following section mismatch warnings appear: WARNING: vmlinux.o(.text+0x7239cc): Section mismatch in reference from the function db8500_prcmu_probe() to the function .init.text:init_prcm_registers() The function db8500_prcmu_probe() references the function __init init_prcm_registers(). This is often because db8500_prcmu_probe lacks a __init annotation or the annotation of init_prcm_registers is wrong. WARNING: vmlinux.o(.text+0x723e28): Section mismatch in reference from the function db8500_prcmu_probe() to the function .init.text:fw_project_name() The function db8500_prcmu_probe() references the function __init fw_project_name(). This is often because db8500_prcmu_probe lacks a __init annotation or the annotation of fw_project_name is wrong. db8500_prcmu_probe should not be marked as __init so remove the __init annotation from fw_project_name and init_prcm_registers. Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 88385550 ] When building the kernel with Clang, the following section mismatch warning appears: WARNING: vmlinux.o(.text+0x3d84a3b): Section mismatch in reference from the function twl_probe() to the function .init.text:unprotect_pm_master() The function twl_probe() references the function __init unprotect_pm_master(). This is often because twl_probe lacks a __init annotation or the annotation of unprotect_pm_master is wrong. Remove the __init annotation on the *protect_pm_master functions so there is no more mismatch. Signed-off-by:
-
Stefano Stabellini authored
[ Upstream commit e6587cdb ] When a connection is closing we receive on pvcalls_sk_state_change notification. Instead of setting the connection as closed immediately (-ENOTCONN), let's read one more time from it: pvcalls_conn_back_read will set the connection as closed when necessary. That way, we avoid races between pvcalls_sk_state_change and pvcalls_back_ioworker. Signed-off-by:
Stefano Stabellini <stefanos@xilinx.com> Reviewed-by:
-
Vignesh R authored
[ Upstream commit b40ee006 ] Use PLATFORM_DEVID_AUTO to number mfd cells while registering, so that different instances are uniquely identified. This is required in order to support registering of multiple instances of same ti_am335x_tscadc IP. Signed-off-by:
Vignesh R <vigneshr@ti.com> Signed-off-by:
-
Eric Biggers authored
commit a08bf91c upstream. If the sysctl 'kernel.keys.maxkeys' is set to some number n, then actually users can only add up to 'n - 1' keys. Likewise for 'kernel.keys.maxbytes' and the root_* versions of these sysctls. But these sysctls are apparently supposed to be *maximums*, as per their names and all documentation I could find -- the keyrings(7) man page, Documentation/security/keys/core.rst, and all the mentions of EDQUOT meaning that the key quota was *exceeded* (as opposed to reached). Thus, fix the code to allow reaching the quotas exactly. Fixes: 0b77f5bf ("keys: make the keyring quotas controllable through /proc/sys") Cc: stable@vger.kernel.org Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
James Morris <james.morris@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michal Hocko authored
commit b2b46993 upstream. Tetsuo has reported that creating a thousands of processes sharing MM without SIGHAND (aka alien threads) and setting /proc/<pid>/oom_score_adj will swamp the kernel log and takes ages [1] to finish. This is especially worrisome that all that printing is done under RCU lock and this can potentially trigger RCU stall or softlockup detector. The primary reason for the printk was to catch potential users who might depend on the behavior prior to 44a70ade ("mm, oom_adj: make sure processes sharing mm have same view of oom_score_adj") but after more than 2 years without a single report I guess it is safe to simply remove the printk altogether. The next step should be moving oom_score_adj over to the mm struct and remove all the tasks crawling as suggested by [2] [1] http://lkml.kernel.org/r/97fce864-6f75-bca5-14bc-12c9f890e740@i-love.sakura.ne.jp [2] http://lkml.kernel.org/r/20190117155159.GA4087@dhcp22.suse.cz Link: http://lkml.kernel.org/r/20190212102129.26288-1-mhocko@kernel.orgSigned-off-by:
Michal Hocko <mhocko@suse.com> Reported-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: David Rientjes <rientjes@google.com> Cc: Yong-Taek Lee <ytk.lee@samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Ralph Campbell authored
commit 050c17f2 upstream. The system call, get_mempolicy() [1], passes an unsigned long *nodemask pointer and an unsigned long maxnode argument which specifies the length of the user's nodemask array in bits (which is rounded up). The manual page says that if the maxnode value is too small, get_mempolicy will return EINVAL but there is no system call to return this minimum value. To determine this value, some programs search /proc/<pid>/status for a line starting with "Mems_allowed:" and use the number of digits in the mask to determine the minimum value. A recent change to the way this line is formatted [2] causes these programs to compute a value less than MAX_NUMNODES so get_mempolicy() returns EINVAL. Change get_mempolicy(), the older compat version of get_mempolicy(), and the copy_nodes_to_user() function to use nr_node_ids instead of MAX_NUMNODES, thus preserving the defacto method of computing the minimum size for the nodemask array and the maxnode argument. [1] http://man7.org/linux/man-pages/man2/get_mempolicy.2.html [2] https://lore.kernel.org/lkml/1545405631-6808-1-git-send-email-longman@redhat.com Link: http://lkml.kernel.org/r/20190211180245.22295-1-rcampbell@nvidia.com Fixes: 4fb8e5b89bcbbbb ("include/linux/nodemask.h: use nr_node_ids (not MAX_NUMNODES) in __nodemask_pr_numnodes()") Signed-off-by:
Ralph Campbell <rcampbell@nvidia.com> Suggested-by:
Alexander Duyck <alexander.duyck@gmail.com> Cc: Waiman Long <longman@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Yan, Zheng authored
commit 04242ff3 upstream. Otherwise, mdsc->snap_flush_list may get corrupted. Cc: stable@vger.kernel.org Signed-off-by:
"Yan, Zheng" <zyan@redhat.com> Reviewed-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Ilya Dryomov authored
commit 0fd3fd0a upstream. The authorize reply can be empty, for example when the ticket used to build the authorizer is too old and TAG_BADAUTHORIZER is returned from the service. Calling ->verify_authorizer_reply() results in an attempt to decrypt and validate (somewhat) random data in au->buf (most likely the signature block from calc_signature()), which fails and ends up in con_fault_finish() with !con->auth_retry. The ticket isn't invalidated and the connection is retried again and again until a new ticket is obtained from the monitor: libceph: osd2 192.168.122.1:6809 bad authorize reply libceph: osd2 192.168.122.1:6809 bad authorize reply libceph: osd2 192.168.122.1:6809 bad authorize reply libceph: osd2 192.168.122.1:6809 bad authorize reply Let TAG_BADAUTHORIZER handler kick in and increment con->auth_retry. Cc: stable@vger.kernel.org Fixes: 5c056fdc ("libceph: verify authorize reply on connect") Link: https://tracker.ceph.com/issues/20164Signed-off-by:
Sage Weil <sage@redhat.com> Signed-off-by:
-
Herbert Xu authored
commit 4ff3a9d1 upstream. When rhashtable insertion fails the mesh table code doesn't free the now-orphan mesh path object. This patch fixes that. Cc: stable@vger.kernel.org Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Rakesh Pillai authored
commit 83e37e0b upstream. The starting of AP interface can fail due to invalid beacon interval, which does not match the minimum gcd requirement set by the wifi driver. In such case, the beacon interval of that interface gets updated with that invalid beacon interval. The next time that interface is brought up in AP mode, an interface combination check is performed and the beacon interval is taken from the previously set value. In a case where an invalid beacon interval, i.e. a beacon interval value which does not satisfy the minimum gcd criteria set by the driver, is set, all the subsequent trials to bring that interface in AP mode will fail, even if the subsequent trials have a valid beacon interval. To avoid this, in case of a failure in bringing up an interface in AP mode due to interface combination error, the interface beacon interval which is stored in bss conf, needs to be restored with the last working value of beacon interval. Tested on ath10k using WCN3990. Cc: stable@vger.kernel.org Fixes: 0c317a02 ("cfg80211: support virtual interfaces with different beacon intervals") Signed-off-by:
Rakesh Pillai <pillair@codeaurora.org> Signed-off-by:
-
Paul Burton authored
commit 13443154 upstream. The function prototype used to call JITed eBPF code (ie. the type of the struct bpf_prog bpf_func field) returns an unsigned int. The MIPS n64 ABI that MIPS64 kernels target defines that 32 bit integers should always be sign extended when passed in registers as either arguments or return values. This means that when returning any value which may not already be sign extended (ie. of type REG_64BIT or REG_32BIT_ZERO_EX) we need to perform that sign extension in order to comply with the n64 ABI. Without this we see strange looking test failures from test_bpf.ko, such as: test_bpf: #65 ALU64_MOV_X: dst = 4294967295 jited:1 ret -1 != -1 FAIL (1 times) Although the return value printed matches the expected value, this is only because printf is only examining the least significant 32 bits of the 64 bit register value we returned. The register holding the expected value is sign extended whilst the v0 register was set to a zero extended value by our JITed code, so when compared by a conditional branch instruction the values are not equal. We already handle this when the return value register is of type REG_32BIT_ZERO_EX, so simply extend this to also cover REG_64BIT. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Quentin Perret authored
commit 9e738215 upstream. The following commit 441dae8f ("tracing: Add support for display of tgid in trace output") removed the call to print_event_info() from print_func_help_header_irq() which results in the ftrace header not reporting the number of entries written in the buffer. As this wasn't the original intent of the patch, re-introduce the call to print_event_info() to restore the orginal behaviour. Link: http://lkml.kernel.org/r/20190214152950.4179-1-quentin.perret@arm.comAcked-by:
Joel Fernandes <joelaf@google.com> Cc: stable@vger.kernel.org Fixes: 441dae8f ("tracing: Add support for display of tgid in trace output") Signed-off-by:
Quentin Perret <quentin.perret@arm.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Mathieu Desnoyers authored
commit 0ac569bf upstream. commit e46daee5 ("ARM: 8806/1: kprobes: Fix false positive with FORTIFY_SOURCE") introduced a regression in optimized kprobes. It triggers "invalid instruction" oopses when using kprobes instrumentation through lttng and perf. This commit was introduced in kernel v4.20, and has been backported to stable kernels 4.19 and 4.14. This crash was also reported by Hongzhi Song on the redhat bugzilla where the patch was originally introduced. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1639397 Link: https://bugs.lttng.org/issues/1174 Link: https://lore.kernel.org/lkml/342740659.2887.1549307721609.JavaMail.zimbra@efficios.com Fixes: e46daee5 ("ARM: 8806/1: kprobes: Fix false positive with FORTIFY_SOURCE") Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reported-by:
Robert Berger <Robert.Berger@ReliableEmbeddedSystems.com> Tested-by:
Kees Cook <keescook@chromium.org> Cc: Robert Berger <Robert.Berger@ReliableEmbeddedSystems.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: William Cohen <wcohen@redhat.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: <stable@vger.kernel.org> # v4.14+ Cc: linux-arm-kernel@lists.infradead.org Cc: patches@armlinux.org.uk Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
- 23 Feb, 2019 4 commits
-
-
Greg Kroah-Hartman authored
-
Eric Dumazet authored
commit 63530aba upstream. syzbot found that ax25 routes where not properly protected against concurrent use [1]. In this particular report the bug happened while copying ax25->digipeat. Fix this problem by making sure we call ax25_get_route() while ax25_route_lock is held, so that no modification could happen while using the route. The current two ax25_get_route() callers do not sleep, so this change should be fine. Once we do that, ax25_get_route() no longer needs to grab a reference on the found route. [1] ax25_connect(): syz-executor0 uses autobind, please contact jreuter@yaina.de BUG: KASAN: use-after-free in memcpy include/linux/string.h:352 [inline] BUG: KASAN: use-after-free in kmemdup+0x42/0x60 mm/util.c:113 Read of size 66 at addr ffff888066641a80 by task syz-executor2/531 ax25_connect(): syz-executor0 uses autobind, please contact jreuter@yaina.de CPU: 1 PID: 531 Comm: syz-executor2 Not tainted 5.0.0-rc2+ #10 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1db/0x2d0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 memcpy+0x24/0x50 mm/kasan/common.c:130 memcpy include/linux/string.h:352 [inline] kmemdup+0x42/0x60 mm/util.c:113 kmemdup include/linux/string.h:425 [inline] ax25_rt_autobind+0x25d/0x750 net/ax25/ax25_route.c:424 ax25_connect.cold+0x30/0xa4 net/ax25/af_ax25.c:1224 __sys_connect+0x357/0x490 net/socket.c:1664 __do_sys_connect net/socket.c:1675 [inline] __se_sys_connect net/socket.c:1672 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1672 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458099 Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f870ee22c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458099 RDX: 0000000000000048 RSI: 0000000020000080 RDI: 0000000000000005 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 ax25_connect(): syz-executor4 uses autobind, please contact jreuter@yaina.de R10: 0000000000000000 R11: 0000000000000246 R12: 00007f870ee236d4 R13: 00000000004be48e R14: 00000000004ce9a8 R15: 00000000ffffffff Allocated by task 526: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc mm/kasan/common.c:496 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:469 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:504 ax25_connect(): syz-executor5 uses autobind, please contact jreuter@yaina.de kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3609 kmalloc include/linux/slab.h:545 [inline] ax25_rt_add net/ax25/ax25_route.c:95 [inline] ax25_rt_ioctl+0x3b9/0x1270 net/ax25/ax25_route.c:233 ax25_ioctl+0x322/0x10b0 net/ax25/af_ax25.c:1763 sock_do_ioctl+0xe2/0x400 net/socket.c:950 sock_ioctl+0x32f/0x6c0 net/socket.c:1074 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0x107b/0x17d0 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe ax25_connect(): syz-executor5 uses autobind, please contact jreuter@yaina.de Freed by task 550: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:458 kasan_slab_free+0xe/0x10 mm/kasan/common.c:466 __cache_free mm/slab.c:3487 [inline] kfree+0xcf/0x230 mm/slab.c:3806 ax25_rt_add net/ax25/ax25_route.c:92 [inline] ax25_rt_ioctl+0x304/0x1270 net/ax25/ax25_route.c:233 ax25_ioctl+0x322/0x10b0 net/ax25/af_ax25.c:1763 sock_do_ioctl+0xe2/0x400 net/socket.c:950 sock_ioctl+0x32f/0x6c0 net/socket.c:1074 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0x107b/0x17d0 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff888066641a80 which belongs to the cache kmalloc-96 of size 96 The buggy address is located 0 bytes inside of 96-byte region [ffff888066641a80, ffff888066641ae0) The buggy address belongs to the page: page:ffffea0001999040 count:1 mapcount:0 mapping:ffff88812c3f04c0 index:0x0 flags: 0x1fffc0000000200(slab) ax25_connect(): syz-executor4 uses autobind, please contact jreuter@yaina.de raw: 01fffc0000000200 ffffea0001817948 ffffea0002341dc8 ffff88812c3f04c0 raw: 0000000000000000 ffff888066641000 0000000100000020 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888066641980: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff888066641a00: 00 00 00 00 00 00 00 00 02 fc fc fc fc fc fc fc >ffff888066641a80: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ^ ffff888066641b00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff888066641b80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Ralf Baechle <ralf@linux-mips.org> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Eric Dumazet authored
commit bdcc5bc2 upstream. Since mISDN_close() uses dev->pending to iterate over active timers, there is a chance that one timer got removed from the ->pending list in dev_expire_timer() but that the thread has not called yet wake_up_interruptible() So mISDN_close() could miss this and free dev before completion of at least one dev_expire_timer() syzbot was able to catch this race : BUG: KASAN: use-after-free in register_lock_class+0x140c/0x1bf0 kernel/locking/lockdep.c:827 Write of size 8 at addr ffff88809fc18948 by task syz-executor1/24769 CPU: 1 PID: 24769 Comm: syz-executor1 Not tainted 5.0.0-rc5 #60 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_store8_noabort+0x17/0x20 mm/kasan/generic_report.c:140 register_lock_class+0x140c/0x1bf0 kernel/locking/lockdep.c:827 __lock_acquire+0x11f/0x4700 kernel/locking/lockdep.c:3224 lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3841 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x95/0xcd kernel/locking/spinlock.c:152 __wake_up_common_lock+0xc7/0x190 kernel/sched/wait.c:120 __wake_up+0xe/0x10 kernel/sched/wait.c:145 dev_expire_timer+0xe4/0x3b0 drivers/isdn/mISDN/timerdev.c:174 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 protocol 88fb is buggy, dev hsr_slave_0 protocol 88fb is buggy, dev hsr_slave_1 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x180/0x1d0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x14a/0x570 arch/x86/kernel/apic/apic.c:1062 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807 </IRQ> RIP: 0010:__sanitizer_cov_trace_pc+0x26/0x50 kernel/kcov.c:101 Code: 90 90 90 90 55 48 89 e5 48 8b 75 08 65 48 8b 04 25 40 ee 01 00 65 8b 15 98 12 92 7e 81 e2 00 01 1f 00 75 2b 8b 90 d8 12 00 00 <83> fa 02 75 20 48 8b 88 e0 12 00 00 8b 80 dc 12 00 00 48 8b 11 48 RSP: 0018:ffff8880589b7a60 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: ffff888087ce25c0 RBX: 0000000000000001 RCX: ffffffff818f8ca3 RDX: 0000000000000000 RSI: ffffffff818f8b48 RDI: 0000000000000001 RBP: ffff8880589b7a60 R08: ffff888087ce25c0 R09: ffffed1015d25bd0 R10: ffffed1015d25bcf R11: ffff8880ae92de7b R12: ffffea0001ae4680 R13: ffffea0001ae4688 R14: 0000000000000000 R15: ffffea0001b41648 PageIdle include/linux/page-flags.h:398 [inline] page_is_idle include/linux/page_idle.h:29 [inline] mark_page_accessed+0x618/0x1140 mm/swap.c:398 touch_buffer fs/buffer.c:59 [inline] __find_get_block+0x312/0xcc0 fs/buffer.c:1298 sb_find_get_block include/linux/buffer_head.h:338 [inline] recently_deleted fs/ext4/ialloc.c:682 [inline] find_inode_bit.isra.0+0x202/0x510 fs/ext4/ialloc.c:722 __ext4_new_inode+0x14ad/0x52c0 fs/ext4/ialloc.c:914 ext4_symlink+0x3f8/0xbe0 fs/ext4/namei.c:3096 vfs_symlink fs/namei.c:4126 [inline] vfs_symlink+0x378/0x5d0 fs/namei.c:4112 do_symlinkat+0x22b/0x290 fs/namei.c:4153 __do_sys_symlink fs/namei.c:4172 [inline] __se_sys_symlink fs/namei.c:4170 [inline] __x64_sys_symlink+0x59/0x80 fs/namei.c:4170 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457b67 Code: 0f 1f 00 b8 5c 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 6d bb fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 b8 58 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 4d bb fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fff045ce0f8 EFLAGS: 00000202 ORIG_RAX: 0000000000000058 RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 0000000000457b67 RDX: 00007fff045ce173 RSI: 00000000004bd63f RDI: 00007fff045ce160 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 R10: 0000000000000075 R11: 0000000000000202 R12: 0000000000000000 R13: 0000000000000001 R14: 000000000000029b R15: 0000000000000001 Allocated by task 24763: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc mm/kasan/common.c:496 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:469 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:504 kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3609 kmalloc include/linux/slab.h:545 [inline] mISDN_open+0x9a/0x270 drivers/isdn/mISDN/timerdev.c:59 misc_open+0x398/0x4c0 drivers/char/misc.c:141 chrdev_open+0x247/0x6b0 fs/char_dev.c:417 do_dentry_open+0x47d/0x1130 fs/open.c:771 vfs_open+0xa0/0xd0 fs/open.c:880 do_last fs/namei.c:3418 [inline] path_openat+0x10d7/0x4690 fs/namei.c:3534 do_filp_open+0x1a1/0x280 fs/namei.c:3564 do_sys_open+0x3fe/0x5d0 fs/open.c:1063 __do_sys_openat fs/open.c:1090 [inline] __se_sys_openat fs/open.c:1084 [inline] __x64_sys_openat+0x9d/0x100 fs/open.c:1084 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 24762: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:458 kasan_slab_free+0xe/0x10 mm/kasan/common.c:466 __cache_free mm/slab.c:3487 [inline] kfree+0xcf/0x230 mm/slab.c:3806 mISDN_close+0x2a1/0x390 drivers/isdn/mISDN/timerdev.c:97 __fput+0x2df/0x8d0 fs/file_table.c:278 ____fput+0x16/0x20 fs/file_table.c:309 task_work_run+0x14a/0x1c0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_usermode_loop+0x273/0x2c0 arch/x86/entry/common.c:166 prepare_exit_to_usermode arch/x86/entry/common.c:197 [inline] syscall_return_slowpath arch/x86/entry/common.c:268 [inline] do_syscall_64+0x52d/0x610 arch/x86/entry/common.c:293 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff88809fc18900 which belongs to the cache kmalloc-192 of size 192 The buggy address is located 72 bytes inside of 192-byte region [ffff88809fc18900, ffff88809fc189c0) The buggy address belongs to the page: page:ffffea00027f0600 count:1 mapcount:0 mapping:ffff88812c3f0040 index:0xffff88809fc18000 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea000269f648 ffffea00029f7408 ffff88812c3f0040 raw: ffff88809fc18000 ffff88809fc18000 000000010000000b 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88809fc18800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88809fc18880: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88809fc18900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88809fc18980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff88809fc18a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Signed-off-by:
-
Eric Dumazet authored
commit cf657d22 upstream. Due to quadratic behavior of x25_new_lci(), syzbot was able to trigger an rcu stall. Fix this by not blocking BH for the whole duration of the function, and inserting a reschedule point when possible. If we care enough, using a bitmap could get rid of the quadratic behavior. syzbot report : rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-...!: (10500 ticks this GP) idle=4fa/1/0x4000000000000002 softirq=283376/283376 fqs=0 rcu: (t=10501 jiffies g=383105 q=136) rcu: rcu_preempt kthread starved for 10502 jiffies! g383105 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0 rcu: RCU grace-period kthread stack dump: rcu_preempt I28928 10 2 0x80000000 Call Trace: context_switch kernel/sched/core.c:2844 [inline] __schedule+0x817/0x1cc0 kernel/sched/core.c:3485 schedule+0x92/0x180 kernel/sched/core.c:3529 schedule_timeout+0x4db/0xfd0 kernel/time/timer.c:1803 rcu_gp_fqs_loop kernel/rcu/tree.c:1948 [inline] rcu_gp_kthread+0x956/0x17a0 kernel/rcu/tree.c:2105 kthread+0x357/0x430 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 NMI backtrace for cpu 0 CPU: 0 PID: 8759 Comm: syz-executor2 Not tainted 5.0.0-rc4+ #51 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 nmi_cpu_backtrace.cold+0x63/0xa4 lib/nmi_backtrace.c:101 nmi_trigger_cpumask_backtrace+0x1be/0x236 lib/nmi_backtrace.c:62 arch_trigger_cpumask_backtrace+0x14/0x20 arch/x86/kernel/apic/hw_nmi.c:38 trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline] rcu_dump_cpu_stacks+0x183/0x1cf kernel/rcu/tree.c:1211 print_cpu_stall kernel/rcu/tree.c:1348 [inline] check_cpu_stall kernel/rcu/tree.c:1422 [inline] rcu_pending kernel/rcu/tree.c:3018 [inline] rcu_check_callbacks.cold+0x500/0xa4a kernel/rcu/tree.c:2521 update_process_times+0x32/0x80 kernel/time/timer.c:1635 tick_sched_handle+0xa2/0x190 kernel/time/tick-sched.c:161 tick_sched_timer+0x47/0x130 kernel/time/tick-sched.c:1271 __run_hrtimer kernel/time/hrtimer.c:1389 [inline] __hrtimer_run_queues+0x33e/0xde0 kernel/time/hrtimer.c:1451 hrtimer_interrupt+0x314/0x770 kernel/time/hrtimer.c:1509 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1035 [inline] smp_apic_timer_interrupt+0x120/0x570 arch/x86/kernel/apic/apic.c:1060 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807 </IRQ> RIP: 0010:__read_once_size include/linux/compiler.h:193 [inline] RIP: 0010:queued_write_lock_slowpath+0x13e/0x290 kernel/locking/qrwlock.c:86 Code: 00 00 fc ff df 4c 8d 2c 01 41 83 c7 03 41 0f b6 45 00 41 38 c7 7c 08 84 c0 0f 85 0c 01 00 00 8b 03 3d 00 01 00 00 74 1a f3 90 <41> 0f b6 55 00 41 38 d7 7c eb 84 d2 74 e7 48 89 df e8 6c 0f 4f 00 RSP: 0018:ffff88805f117bd8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13 RAX: 0000000000000300 RBX: ffffffff89413ba0 RCX: 1ffffffff1282774 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff89413ba0 RBP: ffff88805f117c70 R08: 1ffffffff1282774 R09: fffffbfff1282775 R10: fffffbfff1282774 R11: ffffffff89413ba3 R12: 00000000000000ff R13: fffffbfff1282774 R14: 1ffff1100be22f7d R15: 0000000000000003 queued_write_lock include/asm-generic/qrwlock.h:104 [inline] do_raw_write_lock+0x1d6/0x290 kernel/locking/spinlock_debug.c:203 __raw_write_lock_bh include/linux/rwlock_api_smp.h:204 [inline] _raw_write_lock_bh+0x3b/0x50 kernel/locking/spinlock.c:312 x25_insert_socket+0x21/0xe0 net/x25/af_x25.c:267 x25_bind+0x273/0x340 net/x25/af_x25.c:705 __sys_bind+0x23f/0x290 net/socket.c:1505 __do_sys_bind net/socket.c:1516 [inline] __se_sys_bind net/socket.c:1514 [inline] __x64_sys_bind+0x73/0xb0 net/socket.c:1514 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457e39 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fafccd0dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000031 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457e39 RDX: 0000000000000012 RSI: 0000000020000240 RDI: 0000000000000004 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fafccd0e6d4 R13: 00000000004bdf8b R14: 00000000004ce4b8 R15: 00000000ffffffff Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 8752 Comm: syz-executor4 Not tainted 5.0.0-rc4+ #51 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__x25_find_socket+0x78/0x120 net/x25/af_x25.c:328 Code: 89 f8 48 c1 e8 03 80 3c 18 00 0f 85 a6 00 00 00 4d 8b 64 24 68 4d 85 e4 74 7f e8 03 97 3d fb 49 83 ec 68 74 74 e8 f8 96 3d fb <49> 8d bc 24 88 04 00 00 48 89 f8 48 c1 e8 03 0f b6 04 18 84 c0 74 RSP: 0018:ffff8880639efc58 EFLAGS: 00000246 RAX: 0000000000040000 RBX: dffffc0000000000 RCX: ffffc9000e677000 RDX: 0000000000040000 RSI: ffffffff863244b8 RDI: ffff88806a764628 RBP: ffff8880639efc80 R08: ffff8880a80d05c0 R09: fffffbfff1282775 R10: fffffbfff1282774 R11: ffffffff89413ba3 R12: ffff88806a7645c0 R13: 0000000000000001 R14: ffff88809f29ac00 R15: 0000000000000000 FS: 00007fe8d0c58700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32823000 CR3: 00000000672eb000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: x25_new_lci net/x25/af_x25.c:357 [inline] x25_connect+0x374/0xdf0 net/x25/af_x25.c:786 __sys_connect+0x266/0x330 net/socket.c:1686 __do_sys_connect net/socket.c:1697 [inline] __se_sys_connect net/socket.c:1694 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1694 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457e39 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fe8d0c57c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457e39 RDX: 0000000000000012 RSI: 0000000020000200 RDI: 0000000000000004 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe8d0c586d4 R13: 00000000004be378 R14: 00000000004ceb00 R15: 00000000ffffffff Signed-off-by:
-
