1. 02 Aug, 2017 6 commits
    • Mike Rapoport's avatar
      userfaultfd: non-cooperative: notify about unmap of destination during mremap · b2282371
      Mike Rapoport authored
      When mremap is called with MREMAP_FIXED it unmaps memory at the
      destination address without notifying userfaultfd monitor.
      
      If the destination were registered with userfaultfd, the monitor has no
      way to distinguish between the old and new ranges and to properly relate
      the page faults that would occur in the destination region.
      
      Fixes: 897ab3e0 ("userfaultfd: non-cooperative: add event for memory unmaps")
      Link: http://lkml.kernel.org/r/1500276876-3350-1-git-send-email-rppt@linux.vnet.ibm.comSigned-off-by: default avatarMike Rapoport <rppt@linux.vnet.ibm.com>
      Acked-by: default avatarPavel Emelyanov <xemul@virtuozzo.com>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b2282371
    • Mel Gorman's avatar
      mm, mprotect: flush TLB if potentially racing with a parallel reclaim leaving stale TLB entries · 3ea27719
      Mel Gorman authored
      Nadav Amit identified a theoritical race between page reclaim and
      mprotect due to TLB flushes being batched outside of the PTL being held.
      
      He described the race as follows:
      
              CPU0                            CPU1
              ----                            ----
                                              user accesses memory using RW PTE
                                              [PTE now cached in TLB]
              try_to_unmap_one()
              ==> ptep_get_and_clear()
              ==> set_tlb_ubc_flush_pending()
                                              mprotect(addr, PROT_READ)
                                              ==> change_pte_range()
                                              ==> [ PTE non-present - no flush ]
      
                                              user writes using cached RW PTE
              ...
      
              try_to_unmap_flush()
      
      The same type of race exists for reads when protecting for PROT_NONE and
      also exists for operations that can leave an old TLB entry behind such
      as munmap, mremap and madvise.
      
      For some operations like mprotect, it's not necessarily a data integrity
      issue but it is a correctness issue as there is a window where an
      mprotect that limits access still allows access.  For munmap, it's
      potentially a data integrity issue although the race is massive as an
      munmap, mmap and return to userspace must all complete between the
      window when reclaim drops the PTL and flushes the TLB.  However, it's
      theoritically possible so handle this issue by flushing the mm if
      reclaim is potentially currently batching TLB flushes.
      
      Other instances where a flush is required for a present pte should be ok
      as either the page lock is held preventing parallel reclaim or a page
      reference count is elevated preventing a parallel free leading to
      corruption.  In the case of page_mkclean there isn't an obvious path
      that userspace could take advantage of without using the operations that
      are guarded by this patch.  Other users such as gup as a race with
      reclaim looks just at PTEs.  huge page variants should be ok as they
      don't race with reclaim.  mincore only looks at PTEs.  userfault also
      should be ok as if a parallel reclaim takes place, it will either fault
      the page back in or read some of the data before the flush occurs
      triggering a fault.
      
      Note that a variant of this patch was acked by Andy Lutomirski but this
      was for the x86 parts on top of his PCID work which didn't make the 4.13
      merge window as expected.  His ack is dropped from this version and
      there will be a follow-on patch on top of PCID that will include his
      ack.
      
      [akpm@linux-foundation.org: tweak comments]
      [akpm@linux-foundation.org: fix spello]
      Link: http://lkml.kernel.org/r/20170717155523.emckq2esjro6hf3z@suse.deReported-by: default avatarNadav Amit <nadav.amit@gmail.com>
      Signed-off-by: default avatarMel Gorman <mgorman@suse.de>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: <stable@vger.kernel.org>	[v4.4+]
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      3ea27719
    • Kefeng Wang's avatar
      pid: kill pidhash_size in pidhash_init() · 27e37d84
      Kefeng Wang authored
      After commit 3d375d78 ("mm: update callers to use HASH_ZERO flag"),
      drop unused pidhash_size in pidhash_init().
      
      Link: http://lkml.kernel.org/r/1500389267-49222-1-git-send-email-wangkefeng.wang@huawei.comSigned-off-by: default avatarKefeng Wang <wangkefeng.wang@huawei.com>
      Reviewed-by: default avatarPavel Tatashin <Pasha.Tatashin@Oracle.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      27e37d84
    • Daniel Jordan's avatar
      mm/hugetlb.c: __get_user_pages ignores certain follow_hugetlb_page errors · 2be7cfed
      Daniel Jordan authored
      Commit 9a291a7c ("mm/hugetlb: report -EHWPOISON not -EFAULT when
      FOLL_HWPOISON is specified") causes __get_user_pages to ignore certain
      errors from follow_hugetlb_page.  After such error, __get_user_pages
      subsequently calls faultin_page on the same VMA and start address that
      follow_hugetlb_page failed on instead of returning the error immediately
      as it should.
      
      In follow_hugetlb_page, when hugetlb_fault returns a value covered under
      VM_FAULT_ERROR, follow_hugetlb_page returns it without setting nr_pages
      to 0 as __get_user_pages expects in this case, which causes the
      following to happen in __get_user_pages: the "while (nr_pages)" check
      succeeds, we skip the "if (!vma..." check because we got a VMA the last
      time around, we find no page with follow_page_mask, and we call
      faultin_page, which calls hugetlb_fault for the second time.
      
      This issue also slightly changes how __get_user_pages works.  Before, it
      only returned error if it had made no progress (i = 0).  But now,
      follow_hugetlb_page can clobber "i" with an error code since its new
      return path doesn't check for progress.  So if "i" is nonzero before a
      failing call to follow_hugetlb_page, that indication of progress is lost
      and __get_user_pages can return error even if some pages were
      successfully pinned.
      
      To fix this, change follow_hugetlb_page so that it updates nr_pages,
      allowing __get_user_pages to fail immediately and restoring the "error
      only if no progress" behavior to __get_user_pages.
      
      Tested that __get_user_pages returns when expected on error from
      hugetlb_fault in follow_hugetlb_page.
      
      Fixes: 9a291a7c ("mm/hugetlb: report -EHWPOISON not -EFAULT when FOLL_HWPOISON is specified")
      Link: http://lkml.kernel.org/r/1500406795-58462-1-git-send-email-daniel.m.jordan@oracle.comSigned-off-by: default avatarDaniel Jordan <daniel.m.jordan@oracle.com>
      Acked-by: default avatarPunit Agrawal <punit.agrawal@arm.com>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
      Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
      Cc: James Morse <james.morse@arm.com>
      Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
      Cc: Michal Hocko <mhocko@suse.com>
      Cc: Mike Kravetz <mike.kravetz@oracle.com>
      Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: zhong jiang <zhongjiang@huawei.com>
      Cc: <stable@vger.kernel.org>	[4.12.x]
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      2be7cfed
    • Linus Torvalds's avatar
      Merge tag 'platform-drivers-x86-v4.13-3' of git://git.infradead.org/linux-platform-drivers-x86 · 4d3f5d04
      Linus Torvalds authored
      Pull x86 platform driver fixes from Darren Hart:
       "Fix two bugs under error or abnormal usage conditions. Correct a
        config dependency:
      
        dell-wmi:
         - Fix driver interface version query
      
        wmi:
         - Fix error handling in acpi_wmi_init()
      
        peaq-wmi:
         - select INPUT_POLLDEV"
      
      * tag 'platform-drivers-x86-v4.13-3' of git://git.infradead.org/linux-platform-drivers-x86:
        platform/x86: dell-wmi: Fix driver interface version query
        platform/x86: wmi: Fix error handling in acpi_wmi_init()
        platform/x86: peaq-wmi: select INPUT_POLLDEV
      4d3f5d04
    • Linus Torvalds's avatar
      Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi · 33611ba0
      Linus Torvalds authored
      Pull SCSI fixes from James Bottomley:
       "These seven patches are mostly minor build, Kconfig and error leg
        fixes"
      
      * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
        scsi: qedi: Fix return code in qedi_ep_connect()
        scsi: lpfc: fix linking against modular NVMe support
        scsi: scsi_transport_fc: return -EBUSY for deleted vport
        scsi: libcxgbi: add check for valid cxgbi_task_data
        scsi: aic7xxx: fix firmware build with O=path
        scsi: megaraid_sas: fix memleak in megasas_alloc_cmdlist_fusion
        scsi: qedi: Add ISCSI_BOOT_SYSFS to Kconfig
      33611ba0
  2. 01 Aug, 2017 12 commits
    • Andy Lutomirski's avatar
      platform/x86: dell-wmi: Fix driver interface version query · 51391caf
      Andy Lutomirski authored
      When I converted dell-wmi to the new bus infrastructure, I left the
      call to dell_wmi_check_descriptor_buffer() in dell_wmi_init().  This
      could cause two problems:
      
       - An error message when loading the driver on a system without
         dell-wmi.  We'd try to read the event descriptor even if the WMI
         GUID wasn't there.
      
       - A possible race if dell-wmi was loaded manually before wmi was
         fully initialized.
      
      Fix it by moving the call to the probe function where it belongs.
      
      Fixes: bff589be ("platform/x86: dell-wmi: Convert to the WMI bus infrastructure")
      Signed-off-by: default avatarAndy Lutomirski <luto@kernel.org>
      Reviewed-by: default avatarPali Rohár <pali.rohar@gmail.com>
      Signed-off-by: default avatarDarren Hart (VMware) <dvhart@infradead.org>
      51391caf
    • Linus Torvalds's avatar
      Merge branch 'parisc-4.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux · 26c5cebf
      Linus Torvalds authored
      Pull parsic fixes from Helge Deller:
      
       - Our cache flushing code ran into a BUG in case context is not
         current. Fix it by flushing the whole cache in such rare situations
         (by Dave Anglin).
      
       - Fix a "sleeping function called from invalid context BUG" in our
         pdc_stable driver by rearranging our locks (by James Bottomley)
      
       - The thread and irq stacks require more than 16 KB since kernel 4.11.
         Increase both to 32 KB.
      
       - Define CONFIG_CPU_BIG_ENDIAN unconditionally on parisc to avoid wrong
         behaviour in qrwlock functions (by Babu Moger).
      
      * 'parisc-4.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
        parisc: Define CONFIG_CPU_BIG_ENDIAN
        parisc: pdc_stable: Fix locking when creating sysfs links
        parisc: Increase thread and stack size to 32kb
        parisc: Handle vma's whose context is not current in flush_cache_range
      26c5cebf
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · bc78d646
      Linus Torvalds authored
      Pull networking fixes from David Miller:
      
       1) Handle notifier registry failures properly in tun/tap driver, from
          Tonghao Zhang.
      
       2) Fix bpf verifier handling of subtraction bounds and add a testcase
          for this, from Edward Cree.
      
       3) Increase reset timeout in ftgmac100 driver, from Ben Herrenschmidt.
      
       4) Fix use after free in prd_retire_rx_blk_timer_exired() in AF_PACKET,
          from Cong Wang.
      
       5) Fix SElinux regression due to recent UDP optimizations, from Paolo
          Abeni.
      
       6) We accidently increment IPSTATS_MIB_FRAGFAILS in the ipv6 code
          paths, fix from Stefano Brivio.
      
       7) Fix some mem leaks in dccp, from Xin Long.
      
       8) Adjust MDIO_BUS kconfig deps to avoid build errors, from Arnd
          Bergmann.
      
       9) Mac address length check and buffer size fixes from Cong Wang.
      
      10) Don't leak sockets in ipv6 udp early demux, from Paolo Abeni.
      
      11) Fix return value when copy_from_user() fails in
          bpf_prog_get_info_by_fd(), from Daniel Borkmann.
      
      12) Handle PHY_HALTED properly in phy library state machine, from
          Florian Fainelli.
      
      13) Fix OOPS in fib_sync_down_dev(), from Ido Schimmel.
      
      14) Fix truesize calculation in virtio_net which led to performance
          regressions, from Michael S Tsirkin.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
        samples/bpf: fix bpf tunnel cleanup
        udp6: fix jumbogram reception
        ppp: Fix a scheduling-while-atomic bug in del_chan
        Revert "net: bcmgenet: Remove init parameter from bcmgenet_mii_config"
        virtio_net: fix truesize for mergeable buffers
        mv643xx_eth: fix of_irq_to_resource() error check
        MAINTAINERS: Add more files to the PHY LIBRARY section
        ipv4: fib: Fix NULL pointer deref during fib_sync_down_dev()
        net: phy: Correctly process PHY_HALTED in phy_stop_machine()
        sunhme: fix up GREG_STAT and GREG_IMASK register offsets
        bpf: fix bpf_prog_get_info_by_fd to dump correct xlated_prog_len
        tcp: avoid bogus gcc-7 array-bounds warning
        net: tc35815: fix spelling mistake: "Intterrupt" -> "Interrupt"
        bpf: don't indicate success when copy_from_user fails
        udp6: fix socket leak on early demux
        net: thunderx: Fix BGX transmit stall due to underflow
        Revert "vhost: cache used event for better performance"
        team: use a larger struct for mac address
        net: check dev->addr_len for dev_set_mac_address()
        phy: bcm-ns-usb3: fix MDIO_BUS dependency
        ...
      bc78d646
    • William Tu's avatar
      samples/bpf: fix bpf tunnel cleanup · cc75f851
      William Tu authored
      test_tunnel_bpf.sh fails to remove the vxlan11 tunnel device, causing the
      next geneve tunnelling test case fails.  In addition, the geneve reserved bit
      in tcbpf2_kern.c should be zero, according to the RFC.
      Signed-off-by: default avatarWilliam Tu <u9012063@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cc75f851
    • Paolo Abeni's avatar
      udp6: fix jumbogram reception · cb891fa6
      Paolo Abeni authored
      Since commit 67a51780 ("ipv6: udp: leverage scratch area
      helpers") udp6_recvmsg() read the skb len from the scratch area,
      to avoid a cache miss.
      But the UDP6 rx path support RFC 2675 UDPv6 jumbograms, and their
      length exceeds the 16 bits available in the scratch area. As a side
      effect the length returned by recvmsg() is:
      <ingress datagram len> % (1<<16)
      
      This commit addresses the issue allocating one more bit in the
      IP6CB flags field and setting it for incoming jumbograms.
      Such field is still in the first cacheline, so at recvmsg()
      time we can check it and fallback to access skb->len if
      required, without a measurable overhead.
      
      Fixes: 67a51780 ("ipv6: udp: leverage scratch area helpers")
      Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cb891fa6
    • Gao Feng's avatar
      ppp: Fix a scheduling-while-atomic bug in del_chan · ddab8282
      Gao Feng authored
      The PPTP set the pptp_sock_destruct as the sock's sk_destruct, it would
      trigger this bug when __sk_free is invoked in atomic context, because of
      the call path pptp_sock_destruct->del_chan->synchronize_rcu.
      
      Now move the synchronize_rcu to pptp_release from del_chan. This is the
      only one case which would free the sock and need the synchronize_rcu.
      
      The following is the panic I met with kernel 3.3.8, but this issue should
      exist in current kernel too according to the codes.
      
      BUG: scheduling while atomic
      __schedule_bug+0x5e/0x64
      __schedule+0x55/0x580
      ? ppp_unregister_channel+0x1cd5/0x1de0 [ppp_generic]
      ? dev_hard_start_xmit+0x423/0x530
      ? sch_direct_xmit+0x73/0x170
      __cond_resched+0x16/0x30
      _cond_resched+0x22/0x30
      wait_for_common+0x18/0x110
      ? call_rcu_bh+0x10/0x10
      wait_for_completion+0x12/0x20
      wait_rcu_gp+0x34/0x40
      ? wait_rcu_gp+0x40/0x40
      synchronize_sched+0x1e/0x20
      0xf8417298
      0xf8417484
      ? sock_queue_rcv_skb+0x109/0x130
      __sk_free+0x16/0x110
      ? udp_queue_rcv_skb+0x1f2/0x290
      sk_free+0x16/0x20
      __udp4_lib_rcv+0x3b8/0x650
      Signed-off-by: default avatarGao Feng <gfree.wind@vip.163.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ddab8282
    • Florian Fainelli's avatar
      Revert "net: bcmgenet: Remove init parameter from bcmgenet_mii_config" · 00d51094
      Florian Fainelli authored
      This reverts commit 28b45910 ("net: bcmgenet: Remove init parameter
      from bcmgenet_mii_config") because in the process of moving from
      dev_info() to dev_info_once() we essentially lost the helpful printed
      messages once the second instance of the driver is loaded.
      dev_info_once() does not actually print the message once per device
      instance, but once period.
      
      Fixes: 28b45910 ("net: bcmgenet: Remove init parameter from bcmgenet_mii_config")
      Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Reviewed-by: default avatarDoug Berger <opendmb@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      00d51094
    • Michael S. Tsirkin's avatar
      virtio_net: fix truesize for mergeable buffers · 1daa8790
      Michael S. Tsirkin authored
      Seth Forshee noticed a performance degradation with some workloads.
      This turns out to be due to packet drops.  Euan Kemp noticed that this
      is because we drop all packets where length exceeds the truesize, but
      for some packets we add in extra memory without updating the truesize.
      This in turn was kept around unchanged from ab7db917 ("virtio-net:
      auto-tune mergeable rx buffer size for improved performance").  That
      commit had an internal reason not to account for the extra space: not
      enough bits to do it.  No longer true so let's account for the allocated
      length exactly.
      
      Many thanks to Seth Forshee for the report and bisecting and Euan Kemp
      for debugging the issue.
      
      Fixes: 680557cf ("virtio_net: rework mergeable buffer handling")
      Reported-by: default avatarEuan Kemp <euan.kemp@coreos.com>
      Tested-by: default avatarEuan Kemp <euan.kemp@coreos.com>
      Reported-by: default avatarSeth Forshee <seth.forshee@canonical.com>
      Tested-by: default avatarSeth Forshee <seth.forshee@canonical.com>
      Signed-off-by: default avatarMichael S. Tsirkin <mst@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1daa8790
    • Sergei Shtylyov's avatar
      mv643xx_eth: fix of_irq_to_resource() error check · cfbcb61f
      Sergei Shtylyov authored
      of_irq_to_resource() has recently been  fixed to return negative error #'s
      along with 0 in case of failure,  however the Marvell MV643xx Ethernet
      driver still only regards 0  as invalid IRQ -- fix it up.
      
      Fixes: 7a4228bb ("of: irq: use of_irq_get() in of_irq_to_resource()")
      Signed-off-by: default avatarSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cfbcb61f
    • Florian Fainelli's avatar
      MAINTAINERS: Add more files to the PHY LIBRARY section · 13332db5
      Florian Fainelli authored
      Include missing files that are provided by, used, or directly maintained
      within the PHY LIBRARY, this include uapi header, header files used by
      Device Tree code etc.
      Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      13332db5
    • Ido Schimmel's avatar
      ipv4: fib: Fix NULL pointer deref during fib_sync_down_dev() · 71ed7ee3
      Ido Schimmel authored
      Michał reported a NULL pointer deref during fib_sync_down_dev() when
      unregistering a netdevice. The problem is that we don't check for
      'in_dev' being NULL, which can happen in very specific cases.
      
      Usually routes are flushed upon NETDEV_DOWN sent in either the netdev or
      the inetaddr notification chains. However, if an interface isn't
      configured with any IP address, then it's possible for host routes to be
      flushed following NETDEV_UNREGISTER, after NULLing dev->ip_ptr in
      inetdev_destroy().
      
      To reproduce:
      $ ip link add type dummy
      $ ip route add local 1.1.1.0/24 dev dummy0
      $ ip link del dev dummy0
      
      Fix this by checking for the presence of 'in_dev' before referencing it.
      
      Fixes: 982acb97 ("ipv4: fib: Notify about nexthop status changes")
      Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
      Reported-by: default avatarMichał Mirosław <mirq-linux@rere.qmqm.pl>
      Tested-by: default avatarMichał Mirosław <mirq-linux@rere.qmqm.pl>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      71ed7ee3
    • Florian Fainelli's avatar
      net: phy: Correctly process PHY_HALTED in phy_stop_machine() · 7ad813f2
      Florian Fainelli authored
      Marc reported that he was not getting the PHY library adjust_link()
      callback function to run when calling phy_stop() + phy_disconnect()
      which does not indeed happen because we set the state machine to
      PHY_HALTED but we don't get to run it to process this state past that
      point.
      
      Fix this with a synchronous call to phy_state_machine() in order to have
      the state machine actually act on PHY_HALTED, set the PHY device's link
      down, turn the network device's carrier off and finally call the
      adjust_link() function.
      Reported-by: default avatarMarc Gonzalez <marc_gonzalez@sigmadesigns.com>
      Fixes: a390d1f3 ("phylib: convert state_queue work to delayed_work")
      Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarMarc Gonzalez <marc_gonzalez@sigmadesigns.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7ad813f2
  3. 31 Jul, 2017 9 commits
    • Mark Cave-Ayland's avatar
      sunhme: fix up GREG_STAT and GREG_IMASK register offsets · 96a734ba
      Mark Cave-Ayland authored
      Update the values to match those from the STP2002QFP documentation.
      Signed-off-by: default avatarMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      96a734ba
    • Linus Torvalds's avatar
      Merge branch 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup · 2e7ca206
      Linus Torvalds authored
      Pull cgroup fixes from Tejun Heo:
       "Several cgroup bug fixes.
      
         - cgroup core was calling a migration callback on empty migrations,
           which could make cpuset crash.
      
         - There was a very subtle bug where the controller interface files
           aren't created directly when cgroup2 is mounted. Because later
           operations create them, this bug didn't get noticed earlier.
      
         - Failed writes to cgroup.subtree_control were incorrectly returning
           zero"
      
      * 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
        cgroup: fix error return value from cgroup_subtree_control()
        cgroup: create dfl_root files on subsys registration
        cgroup: don't call migration methods if there are no tasks to migrate
      2e7ca206
    • Linus Torvalds's avatar
      Merge branch 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq · ff2620f7
      Linus Torvalds authored
      Pull workqueue fixes from Tejun Heo:
       "Two notable fixes.
      
         - While adding NUMA affinity support to unbound workqueues, the
           assumption that an unbound workqueue with max_active == 1 is
           ordered was broken.
      
           The plan was to use explicit alloc_ordered_workqueue() for those
           cases. Unfortunately, I forgot to update the documentation properly
           and we grew a handful of use cases which depend on that assumption.
      
           While we want to convert them to alloc_ordered_workqueue(), we
           don't really lose anything by enforcing ordered execution on
           unbound max_active == 1 workqueues and it doesn't make sense to
           risk subtle bugs. Restore the assumption.
      
         - Workqueue assumes that CPU <-> NUMA node mapping remains static.
      
           This is a general assumption - we don't have any synchronization
           mechanism around CPU <-> node mapping. Unfortunately, powerpc may
           change the mapping dynamically leading to crashes. Michael added a
           workaround so that we at least don't crash while powerpc hotplug
           code gets updated"
      
      * 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
        workqueue: Work around edge cases for calc of pool's cpumask
        workqueue: implicit ordered attribute should be overridable
        workqueue: restore WQ_UNBOUND/max_active==1 to be ordered
      ff2620f7
    • Linus Torvalds's avatar
      Merge branch 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata · 3dcc4c7d
      Linus Torvalds authored
      Pull libata fixes from Tejun Heo:
       "Dan found a really old bug where libata hotplug code wasn't sanitizing
        index value from userland and may end up indexing with a negative
        number. It is scary but fortunately can only be triggered by root.
      
        Other than that, minor fixes"
      
      * 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
        libata: fix a couple of doc build warnings
        libata: array underflow in ata_find_dev()
        ata: sata_rcar: add gen[23] fallback compatibility strings
        libata: remove unused rc in ata_eh_handle_port_resume
        libata: Cleanup ata_read_log_page()
        ata: fix gemini Kconfig dependencies
      3dcc4c7d
    • Babu Moger's avatar
      parisc: Define CONFIG_CPU_BIG_ENDIAN · 74ad3d28
      Babu Moger authored
      While working on enabling queued rwlock on SPARC, found this following
      code in include/asm-generic/qrwlock.h which uses CONFIG_CPU_BIG_ENDIAN
      to clear a byte.
      
      static inline u8 *__qrwlock_write_byte(struct qrwlock *lock)
       {
      	return (u8 *)lock + 3 * IS_BUILTIN(CONFIG_CPU_BIG_ENDIAN);
       }
      
      Problem is many of the fixed big endian architectures don't define
      CPU_BIG_ENDIAN and clears the wrong byte.
      
      Define CPU_BIG_ENDIAN for parisc architecture to fix it.
      Signed-off-by: default avatarBabu Moger <babu.moger@oracle.com>
      Signed-off-by: default avatarHelge Deller <deller@gmx.de>
      74ad3d28
    • Jonathan Corbet's avatar
      libata: fix a couple of doc build warnings · 2f60e1ab
      Jonathan Corbet authored
      The kerneldoc comments for a couple of functions in drivers/ata/libata-eh.c
      had fallen behind the current implementation, resulting in these doc build
      warnings:
      
        ./drivers/ata/libata-eh.c:1449: warning: No description found for parameter 'link'
        ./drivers/ata/libata-eh.c:1449: warning: Excess function parameter 'ap' description in 'ata_eh_done'
        ./drivers/ata/libata-eh.c:1590: warning: No description found for parameter 'qc'
        ./drivers/ata/libata-eh.c:1590: warning: Excess function parameter 'dev' description in 'ata_eh_request_sense'
      
      Update the comments and make the warnings go away.
      Signed-off-by: default avatarJonathan Corbet <corbet@lwn.net>
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      2f60e1ab
    • James Bottomley's avatar
      parisc: pdc_stable: Fix locking when creating sysfs links · 93964fd4
      James Bottomley authored
      There's no need to take the write lock when creating sysfs links.
      
      This patch fixes the following BUG:
       BUG: sleeping function called from invalid context at mm/slab.h:416
       in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper/0
       CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.13.0-rc2-00110-g0b5477d9 #111
       Backtrace:
       [<0000000040217ac8>] show_stack+0x20/0x38
       [<00000000406fbbb0>] dump_stack+0xb0/0x128
       [<0000000040274090>] ___might_sleep+0x180/0x1b8
       [<0000000040274144>] __might_sleep+0x7c/0xe8
       [<0000000040373874>] kmem_cache_alloc+0x14c/0x1e0
       [<0000000040419514>] __kernfs_new_node+0x84/0x1b8
       [<000000004041b09c>] kernfs_new_node+0x3c/0x78
       [<000000004041e040>] kernfs_create_link+0x40/0xd8
       [<000000004041f320>] sysfs_do_create_link_sd.isra.0+0xb0/0x130
       [<000000004041f3d4>] sysfs_create_link+0x34/0x58
       [<000000004011b4a4>] pdc_stable_init+0x2c4/0x458
       [<0000000040200250>] do_one_initcall+0x70/0x1d8
       [<0000000040101644>] kernel_init_freeable+0x27c/0x390
       [<000000004020be44>] kernel_init+0x24/0x1c0
      Signed-off-by: default avatarJames Bottomley <James.Bottomley@HansenPartnership.com>
      Reported-by: default avatarMeelis Roos <mroos@linux.ee>
      Signed-off-by: default avatarHelge Deller <deller@gmx.de>
      93964fd4
    • Helge Deller's avatar
      parisc: Increase thread and stack size to 32kb · 8f8201df
      Helge Deller authored
      Since kernel 4.11 the thread and irq stacks on parisc randomly overflow
      the default size of 16k. The reason why stack usage suddenly grew is yet
      unknown.
      Signed-off-by: default avatarHelge Deller <deller@gmx.de>
      Cc: stable@vger.kernel.org # 4.11+
      Signed-off-by: default avatarHelge Deller <deller@gmx.de>
      8f8201df
    • John David Anglin's avatar
      parisc: Handle vma's whose context is not current in flush_cache_range · 13d57093
      John David Anglin authored
      In testing James' patch to drivers/parisc/pdc_stable.c, I hit the BUG
      statement in flush_cache_range() during a system shutdown:
      
      kernel BUG at arch/parisc/kernel/cache.c:595!
      CPU: 2 PID: 6532 Comm: kworker/2:0 Not tainted 4.13.0-rc2+ #1
      Workqueue: events free_ioctx
      
       IAOQ[0]: flush_cache_range+0x144/0x148
       IAOQ[1]: flush_cache_page+0x0/0x1a8
       RP(r2): flush_cache_range+0xec/0x148
      Backtrace:
       [<00000000402910ac>] unmap_page_range+0x84/0x880
       [<00000000402918f4>] unmap_single_vma+0x4c/0x60
       [<0000000040291a18>] zap_page_range_single+0x110/0x160
       [<0000000040291c34>] unmap_mapping_range+0x174/0x1a8
       [<000000004026ccd8>] truncate_pagecache+0x50/0xa8
       [<000000004026cd84>] truncate_setsize+0x54/0x70
       [<000000004033d534>] put_aio_ring_file+0x44/0xb0
       [<000000004033d5d8>] aio_free_ring+0x38/0x140
       [<000000004033d714>] free_ioctx+0x34/0xa8
       [<00000000401b0028>] process_one_work+0x1b8/0x4d0
       [<00000000401b04f4>] worker_thread+0x1b4/0x648
       [<00000000401b9128>] kthread+0x1b0/0x208
       [<0000000040150020>] end_fault_vector+0x20/0x28
       [<0000000040639518>] nf_ip_reroute+0x50/0xa8
       [<0000000040638ed0>] nf_ip_route+0x10/0x78
       [<0000000040638c90>] xfrm4_mode_tunnel_input+0x180/0x1f8
      
      CPU: 2 PID: 6532 Comm: kworker/2:0 Not tainted 4.13.0-rc2+ #1
      Workqueue: events free_ioctx
      Backtrace:
       [<0000000040163bf0>] show_stack+0x20/0x38
       [<0000000040688480>] dump_stack+0xa8/0x120
       [<0000000040163dc4>] die_if_kernel+0x19c/0x2b0
       [<0000000040164d0c>] handle_interruption+0xa24/0xa48
      
      This patch modifies flush_cache_range() to handle non current contexts.
      In as much as this occurs infrequently, the simplest approach is to
      flush the entire cache when this happens.
      Signed-off-by: default avatarJohn David Anglin <dave.anglin@bell.net>
      Cc: stable@vger.kernel.org # 4.9+
      Signed-off-by: default avatarHelge Deller <deller@gmx.de>
      13d57093
  4. 30 Jul, 2017 7 commits
  5. 29 Jul, 2017 6 commits