- 25 Oct, 2022 1 commit
-
-
Arnaldo Carvalho de Melo authored
During the transition to libbpf 1.0 some functions that perf used were deprecated and finally removed from libbpf, so bpf_program__set_insns() was introduced for perf to continue to use its bpf loader. But when build with LIBBPF_DYNAMIC=1 we now need to check if that function is available so that perf can build with older libbpf versions, even if the end result is emitting a warning to the user that the use of the perf BPF loader requires a newer libbpf, since bpf_program__set_insns() touches libbpf objects internal state. This affects only 'perf trace' when using bpf C code or pre-compiled bytecode as an event. Noticed on RHEL9, that has libbpf 0.7.0, where bpf_program__set_insns() isn't available. Signed-off-by:Arnaldo Carvalho de Melo <acme@redhat.com>
-
- 04 Oct, 2022 3 commits
-
-
Roberto Sassu authored
Sometimes, features are simply different flavors of another feature, to properly detect the exact dependencies needed by different Linux distributions. For example, libbfd has three flavors: libbfd if the distro does not require any additional dependency; libbfd-liberty if it requires libiberty; libbfd-liberty-z if it requires libiberty and libz. It might not be clear to the user whether a feature has been successfully detected or not, given that some of its flavors will be set to OFF, others to ON. Instead, display only the feature main flavor if not in verbose mode (VF != 1), and set it to ON if at least one of its flavors has been successfully detected (logical OR), OFF otherwise. Omit the other flavors. Accomplish that by declaring a FEATURE_GROUP_MEMBERS-<feature main flavor> variable, with the list of the other flavors as variable value. For now, do it just for libbfd. In verbose mode, of if no group is defined for a feature, show the feature detection result as before. Committer testing: Collecting the output from: $ make -C tools/bpf/bpftool/ clean $ make -C tools/bpf/bpftool/ |& grep "Auto-detecting system features" -A10 $ diff -u before after --- before 2022-08-18 10:06:40.422086966 -0300 +++ after 2022-08-18 10:07:59.202138282 -0300 @@ -1,6 +1,4 @@ Auto-detecting system features: ... libbfd: [ on ] -... libbfd-liberty: [ on ] -... libbfd-liberty-z: [ on ] ... libcap: [ on ] ... clang-bpf-co-re: [ on ] $ Signed-off-by:
Roberto Sassu <roberto.sassu@huawei.com> Tested-by:
-
Roberto Sassu authored
Since now there are features with a long name, increase the room for them, so that fields are correctly aligned. Signed-off-by:
-
Roberto Sassu authored
As the first eval expansion is used only to generate Makefile statements, messages should not be displayed at this stage, as for example conditional expressions are not evaluated. It can be seen for example in the output of feature detection for bpftool, where the number of detected features does not change, despite turning on the verbose mode (VF = 1) and there are additional features to display. Fix this issue by escaping the $ before $(info) statements, to ensure that messages are printed only when the function containing them is actually executed, and not when it is expanded. In addition, move the $(info) statement out of feature_print_status, due to the fact that is called both inside and outside an eval context, and place it to the caller so that the $ can be escaped when necessary. For symmetry, move the $(info) statement also out of feature_print_text, and place it to the caller. Force the TMP variable evaluation in verbose mode, to display the features in FEATURE_TESTS that are not in FEATURE_DISPLAY. Reorder perf feature detection messages (first non-verbose, then verbose ones) by moving the call to feature_display_entries earlier, before the VF environment variable check. Also, remove the newline from that function, as perf might display additional messages. Move the newline to perf Makefile, and display another one if displaying the detection result is not deferred as in the case of bpftool. Committer testing: Collecting the output from: $ make VF=1 -C tools/bpf/bpftool/ |& grep "Auto-detecting system features" -A20 $ diff -u before after --- before 2022-08-18 09:59:55.460529231 -0300 +++ after 2022-08-18 10:01:11.182517282 -0300 @@ -4,3 +4,5 @@ ... libbfd-liberty-z: [ on ] ... libcap: [ on ] ... clang-bpf-co-re: [ on ] +... disassembler-four-args: [ on ] +... disassembler-init-styled: [ OFF ] $ Fixes: 0afc5cad ("perf build: Separate feature make support into config/Makefile.feature") Signed-off-by:
-
- 10 Aug, 2022 3 commits
-
-
Roberto Sassu authored
Switch to new EVP API for detecting libcrypto, as Fedora 36 returns an error when it encounters the deprecated function MD5_Init() and the others. The error would be interpreted as missing libcrypto, while in reality it is not. Fixes: 6e8ccb4f ("tools/bpf: properly account for libbfd variations") Signed-off-by:
-
Arnaldo Carvalho de Melo authored
This reverts commit 10fef869 . Because a proper fix was submitted. Signed-off-by:
-
Roberto Sassu authored
While separate features have been defined to determine which linking flags are required to use libbfd depending on the distribution (libbfd, libbfd-liberty and libbfd-liberty-z), the same has not been done for other features requiring linking to libbfd. For example, disassembler-four-args requires linking to libbfd too, but it should use the right linking flags. If not all the required ones are specified, e.g. -liberty, detection will always fail even if the feature is available. Instead of creating new features, similarly to libbfd, simply retry detection with the different set of flags until detection succeeds (or fails, if the libraries are missing). In this way, feature detection is transparent for the users of this building mechanism (e.g. perf), and those users don't have for example to set an appropriate value for the FEATURE_CHECK_LDFLAGS-disassembler-four-args variable. The number of retries and features for which the retry mechanism is implemented is low enough to make the increase in the complexity of Makefile negligible. Tested with perf and bpftool on Ubuntu 20.04.4 LTS, Fedora 36 and openSUSE Tumbleweed. Committer notes: Do the retry for disassembler-init-styled as well. Signed-off-by:
-
- 02 Aug, 2022 1 commit
-
-
Zixuan Tan authored
With OpenSSL v3 installed, the libcrypto feature check fails as it use the deprecated MD5_* API (and is compiled with -Werror). The error message is as follows. $ make tools/perf ``` Makefile.config:778: No libcrypto.h found, disables jitted code injection, please install openssl-devel or libssl-dev Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... libbfd: [ on ] ... libbfd-buildid: [ on ] ... libcap: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... numa_num_possible_cpus: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libcrypto: [ OFF ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] ... libaio: [ on ] ... libzstd: [ on ] ... disassembler-four-args: [ on ] ``` This is very confusing because the suggested library (on my Ubuntu 20.04 it is libssl-dev) is already installed. As the test only checks for the presence of libcrypto, this commit suppresses the deprecation warning to allow the test to pass. Signed-off-by:
Zixuan Tan <tanzixuan.me@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Nick Terrell <terrelln@fb.com> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20220625153439.513559-1-tanzixuan.me@gmail.com Signed-off-by:
-
- 01 Aug, 2022 2 commits
-
-
Andres Freund authored
The feature check does not seem important enough to display. Suggested by Jiri Olsa. Signed-off-by:
Andres Freund <andres@anarazel.de> Acked-by:
Quentin Monnet <quentin@isovalent.com> Tested-by:
-
Andres Freund authored
binutils changed the signature of init_disassemble_info(), which now causes compilation failures for tools/{perf,bpf}, e.g. on debian unstable. Relevant binutils commit: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=60a3da00bd5407f07 This commit adds a feature test to detect the new signature. Subsequent commits will use it to fix the build failures. Signed-off-by:
-
- 26 May, 2022 6 commits
-
-
Arnaldo Carvalho de Melo authored
By adding a feature test for bpf_map_create() and providing a fallback if it isn't present in older versions of libbpf. This also fixes the build with torvalds/master at this point: $ git log --oneline -5 torvalds/master babf0bb9 (torvalds/master) Merge tag 'xfs-5.19-for-linus' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux e375780b Merge tag 'fsnotify_for_v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs 8b728edc Merge tag 'fs_for_v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs 3f306ea2 Merge tag 'dma-mapping-5.19-2022-05-25' of git://git.infradead.org/users/hch/dma-mapping fbe86dac Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi $ Coping with: $ git log --oneline -2 d16495a9 d16495a9 libbpf: remove bpf_create_map*() APIs e2371b16 libbpf: start 1.0 development cycle $ As the __weak function fails to build as it calls the now removed bpf_create_map() API. Testing: $ rpm -q libbpf-devel libbpf-devel-0.4.0-2.fc35.x86_64 $ $ make -C tools/perf BUILD_BPF_SKEL=1 LIBBPF_DYNAMIC=1 O=/tmp/build/perf install-bin $ cat /tmp/build/perf/feature/test-libbpf-bpf_map_create.make.output test-libbpf-bpf_map_create.c: In function ‘main’: test-libbpf-bpf_map_create.c:6:16: error: implicit declaration of function ‘bpf_map_create’; did you mean ‘bpf_map_freeze’? [-Werror=implicit-function-declaration] 6 | return bpf_map_create(0 /* map_type */, NULL /* map_name */, 0, /* key_size */, | ^~~~~~~~~~~~~~ | bpf_map_freeze test-libbpf-bpf_map_create.c:6:87: error: expected expression before ‘,’ token 6 | return bpf_map_create(0 /* map_type */, NULL /* map_name */, 0, /* key_size */, | ^ cc1: all warnings being treated as errors $ $ objdump -dS /tmp/build/perf/perf | grep '<bpf_map_create>:' -A20 000000000058b290 <bpf_map_create>: { 58b290: 55 push %rbp 58b291: 48 89 e5 mov %rsp,%rbp 58b294: 48 83 ec 10 sub $0x10,%rsp 58b298: 64 48 8b 04 25 28 00 mov %fs:0x28,%rax 58b29f: 00 00 58b2a1: 48 89 45 f8 mov %rax,-0x8(%rbp) 58b2a5: 31 c0 xor %eax,%eax return bpf_create_map(map_type, key_size, value_size, max_entries, 0); 58b2a7: 48 8b 45 f8 mov -0x8(%rbp),%rax 58b2ab: 64 48 2b 04 25 28 00 sub %fs:0x28,%rax 58b2b2: 00 00 58b2b4: 75 10 jne 58b2c6 <bpf_map_create+0x36> } 58b2b6: c9 leave 58b2b7: 89 d6 mov %edx,%esi 58b2b9: 89 ca mov %ecx,%edx 58b2bb: 44 89 c1 mov %r8d,%ecx return bpf_create_map(map_type, key_size, value_size, max_entries, 0); 58b2be: 45 31 c0 xor %r8d,%r8d $ Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: http://lore.kernel.org/linux-perf-users/Yo+XvQNKL4K5khl2@kernel.org Signed-off-by:
-
Jiri Olsa authored
By adding a feature test for btf__raw_data() and providing a fallback if it isn't present in older versions of libbpf. Committer testing: $ rpm -q libbpf-devel libbpf-devel-0.4.0-2.fc35.x86_64 $ make -C tools/perf LIBBPF_DYNAMIC=1 O=/tmp/build/perf install-bin $ cat /tmp/build/perf/feature/test-libbpf-btf__raw_data.make.output test-libbpf-btf__raw_data.c: In function ‘main’: test-libbpf-btf__raw_data.c:6:9: error: implicit declaration of function ‘btf__raw_data’; did you mean ‘btf__get_raw_data’? [-Werror=implicit-function-declaration] 6 | btf__raw_data(NULL /* btf_ro */, NULL /* size */); | ^~~~~~~~~~~~~ | btf__get_raw_data cc1: all warnings being treated as errors $ objdump -dS /tmp/build/perf/perf | grep '<btf__raw_data>:' -A20 00000000005b3050 <btf__raw_data>: { 5b3050: 55 push %rbp 5b3051: 48 89 e5 mov %rsp,%rbp 5b3054: 48 83 ec 10 sub $0x10,%rsp 5b3058: 64 48 8b 04 25 28 00 mov %fs:0x28,%rax 5b305f: 00 00 5b3061: 48 89 45 f8 mov %rax,-0x8(%rbp) 5b3065: 31 c0 xor %eax,%eax return btf__get_raw_data(btf_ro, size); 5b3067: 48 8b 45 f8 mov -0x8(%rbp),%rax 5b306b: 64 48 2b 04 25 28 00 sub %fs:0x28,%rax 5b3072: 00 00 5b3074: 75 06 jne 5b307c <btf__raw_data+0x2c> } 5b3076: c9 leave return btf__get_raw_data(btf_ro, size); 5b3077: e9 14 99 e5 ff jmp 40c990 <btf__get_raw_data@plt> 5b307c: e8 af a7 e5 ff call 40d830 <__stack_chk_fail@plt> 5b3081: 66 66 2e 0f 1f 84 00 data16 cs nopw 0x0(%rax,%rax,1) 5b3088: 00 00 00 00 $ Signed-off-by:Jiri Olsa <jolsa@kernel.org> Tested-by:
-
Jiri Olsa authored
By adding a feature test for bpf_object__next_map() and providing a fallback if it isn't present in older versions of libbpf. Committer testing: $ rpm -q libbpf-devel libbpf-devel-0.4.0-2.fc35.x86_64 $ make -C tools/perf LIBBPF_DYNAMIC=1 O=/tmp/build/perf install-bin $ cat /tmp/build/perf/feature/test-libbpf-bpf_object__next_map.make.output test-libbpf-bpf_object__next_map.c: In function ‘main’: test-libbpf-bpf_object__next_map.c:6:9: error: implicit declaration of function ‘bpf_object__next_map’; did you mean ‘bpf_object__next’? [-Werror=implicit-function-declaration] 6 | bpf_object__next_map(NULL /* obj */, NULL /* prev */); | ^~~~~~~~~~~~~~~~~~~~ | bpf_object__next cc1: all warnings being treated as errors $ $ objdump -dS /tmp/build/perf/perf | grep '<bpf_object__next_map>:' -A20 00000000005b2e00 <bpf_object__next_map>: { 5b2e00: 55 push %rbp 5b2e01: 48 89 e5 mov %rsp,%rbp 5b2e04: 48 83 ec 10 sub $0x10,%rsp 5b2e08: 64 48 8b 04 25 28 00 mov %fs:0x28,%rax 5b2e0f: 00 00 5b2e11: 48 89 45 f8 mov %rax,-0x8(%rbp) 5b2e15: 31 c0 xor %eax,%eax return bpf_map__next(prev, obj); 5b2e17: 48 8b 45 f8 mov -0x8(%rbp),%rax 5b2e1b: 64 48 2b 04 25 28 00 sub %fs:0x28,%rax 5b2e22: 00 00 5b2e24: 75 0f jne 5b2e35 <bpf_object__next_map+0x35> } 5b2e26: c9 leave 5b2e27: 49 89 f8 mov %rdi,%r8 5b2e2a: 48 89 f7 mov %rsi,%rdi return bpf_map__next(prev, obj); 5b2e2d: 4c 89 c6 mov %r8,%rsi 5b2e30: e9 cb b1 e5 ff jmp 40e000 <bpf_map__next@plt> $ Signed-off-by: -
Jiri Olsa authored
By adding a feature test for bpf_object__next_program() and providing a fallback if it isn't present in older versions of libbpf. Committer testing: $ rpm -q libbpf-devel libbpf-devel-0.4.0-2.fc35.x86_64 $ make -C tools/perf LIBBPF_DYNAMIC=1 O=/tmp/build/perf install-bin $ cat /tmp/build/perf/feature/test-libbpf-bpf_object__next_program.make.output test-libbpf-bpf_object__next_program.c: In function ‘main’: test-libbpf-bpf_object__next_program.c:6:9: error: implicit declaration of function ‘bpf_object__next_program’; did you mean ‘bpf_object__unpin_programs’? [-Werror=implicit-function-declaration] 6 | bpf_object__next_program(NULL /* obj */, NULL /* prev */); | ^~~~~~~~~~~~~~~~~~~~~~~~ | bpf_object__unpin_programs cc1: all warnings being treated as errors $ $ objdump -dS /tmp/build/perf/perf | grep '<bpf_object__next_program>:' -A20 00000000005b2dc0 <bpf_object__next_program>: { 5b2dc0: 55 push %rbp 5b2dc1: 48 89 e5 mov %rsp,%rbp 5b2dc4: 48 83 ec 10 sub $0x10,%rsp 5b2dc8: 64 48 8b 04 25 28 00 mov %fs:0x28,%rax 5b2dcf: 00 00 5b2dd1: 48 89 45 f8 mov %rax,-0x8(%rbp) 5b2dd5: 31 c0 xor %eax,%eax return bpf_program__next(prev, obj); 5b2dd7: 48 8b 45 f8 mov -0x8(%rbp),%rax 5b2ddb: 64 48 2b 04 25 28 00 sub %fs:0x28,%rax 5b2de2: 00 00 5b2de4: 75 0f jne 5b2df5 <bpf_object__next_program+0x35> } 5b2de6: c9 leave 5b2de7: 49 89 f8 mov %rdi,%r8 5b2dea: 48 89 f7 mov %rsi,%rdi return bpf_program__next(prev, obj); 5b2ded: 4c 89 c6 mov %r8,%rsi 5b2df0: e9 3b b4 e5 ff jmp 40e230 <bpf_program__next@plt> $ Signed-off-by: -
Jiri Olsa authored
By adding a feature test for bpf_prog_load() and providing a fallback if it isn't present in older versions of libbpf. Committer testing: $ rpm -q libbpf-devel libbpf-devel-0.4.0-2.fc35.x86_64 $ make -C tools/perf LIBBPF_DYNAMIC=1 O=/tmp/build/perf install-bin $ cat /tmp/build/perf/feature/test-libbpf-bpf_prog_load.make.output test-libbpf-bpf_prog_load.c: In function ‘main’: test-libbpf-bpf_prog_load.c:6:16: error: implicit declaration of function ‘bpf_prog_load’ [-Werror=implicit-function-declaration] 6 | return bpf_prog_load(0 /* prog_type */, NULL /* prog_name */, | ^~~~~~~~~~~~~ cc1: all warnings being treated as errors $ $ objdump -dS /tmp/build/perf/perf | grep '<bpf_prog_load>:' -A20 00000000005b2d70 <bpf_prog_load>: { 5b2d70: 55 push %rbp 5b2d71: 48 89 ce mov %rcx,%rsi 5b2d74: 4c 89 c8 mov %r9,%rax 5b2d77: 49 89 d2 mov %rdx,%r10 5b2d7a: 4c 89 c2 mov %r8,%rdx 5b2d7d: 48 89 e5 mov %rsp,%rbp 5b2d80: 48 83 ec 18 sub $0x18,%rsp 5b2d84: 64 48 8b 0c 25 28 00 mov %fs:0x28,%rcx 5b2d8b: 00 00 5b2d8d: 48 89 4d f8 mov %rcx,-0x8(%rbp) 5b2d91: 31 c9 xor %ecx,%ecx return bpf_load_program(prog_type, insns, insn_cnt, license, 5b2d93: 41 8b 49 5c mov 0x5c(%r9),%ecx 5b2d97: 51 push %rcx 5b2d98: 4d 8b 49 60 mov 0x60(%r9),%r9 5b2d9c: 4c 89 d1 mov %r10,%rcx 5b2d9f: 44 8b 40 1c mov 0x1c(%rax),%r8d 5b2da3: e8 f8 aa e5 ff call 40d8a0 <bpf_load_program@plt> } $ Signed-off-by: -
Jiri Olsa authored
The btf__load_from_kernel_by_id() only takes one arg, not two. Committer notes: I tested it just with an older libbpf, one where btf__load_from_kernel_by_id() wasn't introduced yet. A test with a newer dynamic libbpf would fail because the btf__load_from_kernel_by_id() is there, but takes just one arg. Fixes: 0ae065a5 ("perf build: Fix check for btf__load_from_kernel_by_id() in libbpf") Signed-off-by:
-
- 20 May, 2022 1 commit
-
-
Arnaldo Carvalho de Melo authored
Avi Kivity reported a problem where the __weak btf__load_from_kernel_by_id() in tools/perf/util/bpf-event.c was being used and it called btf__get_from_id() in tools/lib/bpf/btf.c that in turn called back to btf__load_from_kernel_by_id(), resulting in an endless loop. Fix this by adding a feature test to check if btf__load_from_kernel_by_id() is available when building perf with LIBBPF_DYNAMIC=1, and if not then provide the fallback to the old btf__get_from_id(), that doesn't call back to btf__load_from_kernel_by_id() since at that time it didn't exist at all. Tested on Fedora 35 where we have libbpf-devel 0.4.0 with LIBBPF_DYNAMIC where we don't have btf__load_from_kernel_by_id() and thus its feature test fail, not defining HAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID: $ cat /tmp/build/perf-urgent/feature/test-libbpf-btf__load_from_kernel_by_id.make.output test-libbpf-btf__load_from_kernel_by_id.c: In function ‘main’: test-libbpf-btf__load_from_kernel_by_id.c:6:16: error: implicit declaration of function ‘btf__load_from_kernel_by_id’ [-Werror=implicit-function-declaration] 6 | return btf__load_from_kernel_by_id(20151128, NULL); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors $ $ nm /tmp/build/perf-urgent/perf | grep btf__load_from_kernel_by_id 00000000005ba180 T btf__load_from_kernel_by_id $ $ objdump --disassemble=btf__load_from_kernel_by_id -S /tmp/build/perf-urgent/perf /tmp/build/perf-urgent/perf: file format elf64-x86-64 <SNIP> 00000000005ba180 <btf__load_from_kernel_by_id>: #include "record.h" #include "util/synthetic-events.h" #ifndef HAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID struct btf *btf__load_from_kernel_by_id(__u32 id) { 5ba180: 55 push %rbp 5ba181: 48 89 e5 mov %rsp,%rbp 5ba184: 48 83 ec 10 sub $0x10,%rsp 5ba188: 64 48 8b 04 25 28 00 mov %fs:0x28,%rax 5ba18f: 00 00 5ba191: 48 89 45 f8 mov %rax,-0x8(%rbp) 5ba195: 31 c0 xor %eax,%eax struct btf *btf; #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wdeprecated-declarations" int err = btf__get_from_id(id, &btf); 5ba197: 48 8d 75 f0 lea -0x10(%rbp),%rsi 5ba19b: e8 a0 57 e5 ff call 40f940 <btf__get_from_id@plt> 5ba1a0: 89 c2 mov %eax,%edx #pragma GCC diagnostic pop return err ? ERR_PTR(err) : btf; 5ba1a2: 48 98 cltq 5ba1a4: 85 d2 test %edx,%edx 5ba1a6: 48 0f 44 45 f0 cmove -0x10(%rbp),%rax } <SNIP> Fixes: 218e7b77 ("perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions") Reported-by:Avi Kivity <avi@scylladb.com> Link: https://lore.kernel.org/linux-perf-users/f0add43b-3de5-20c5-22c4-70aff4af959f@scylladb.com Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/linux-perf-users/YobjjFOblY4Xvwo7@kernel.org Signed-off-by:
-
- 09 Apr, 2022 2 commits
-
-
Arnaldo Carvalho de Melo authored
These make the feature check fail when using clang, so remove them just like is done in tools/perf/Makefile.config to build perf itself. Adding -Wno-compound-token-split-by-macro to tools/perf/Makefile.config when building with clang is also necessary to avoid these warnings turned into errors (-Werror): CC /tmp/build/perf/util/scripting-engines/trace-event-perl.o In file included from util/scripting-engines/trace-event-perl.c:35: In file included from /usr/lib64/perl5/CORE/perl.h:4085: In file included from /usr/lib64/perl5/CORE/hv.h:659: In file included from /usr/lib64/perl5/CORE/hv_func.h:34: In file included from /usr/lib64/perl5/CORE/sbox32_hash.h:4: /usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: error: '(' and '{' tokens introducing statement expression appear in different macro expansion contexts [-Werror,-Wcompound-token-split-by-macro] ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/lib64/perl5/CORE/zaphod32_hash.h:80:38: note: expanded from macro 'ZAPHOD32_SCRAMBLE32' #define ZAPHOD32_SCRAMBLE32(v,prime) STMT_START { \ ^~~~~~~~~~ /usr/lib64/perl5/CORE/perl.h:737:29: note: expanded from macro 'STMT_START' # define STMT_START (void)( /* gcc supports "({ STATEMENTS; })" */ ^ /usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: note: '{' token is here ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/lib64/perl5/CORE/zaphod32_hash.h:80:49: note: expanded from macro 'ZAPHOD32_SCRAMBLE32' #define ZAPHOD32_SCRAMBLE32(v,prime) STMT_START { \ ^ /usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: error: '}' and ')' tokens terminating statement expression appear in different macro expansion contexts [-Werror,-Wcompound-token-split-by-macro] ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/lib64/perl5/CORE/zaphod32_hash.h:87:41: note: expanded from macro 'ZAPHOD32_SCRAMBLE32' v ^= (v>>23); \ ^ /usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: note: ')' token is here ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/lib64/perl5/CORE/zaphod32_hash.h:88:3: note: expanded from macro 'ZAPHOD32_SCRAMBLE32' } STMT_END ^~~~~~~~ /usr/lib64/perl5/CORE/perl.h:738:21: note: expanded from macro 'STMT_END' # define STMT_END ) ^ Please refer to the discussion on the Link: tag below, where Nathan clarifies the situation: <quote> acme> And then get to the problems at the end of this message, which seem acme> similar to the problem described here: acme> acme> From Nathan Chancellor <> acme> Subject [PATCH] mwifiex: Remove unnecessary braces from HostCmd_SET_SEQ_NO_BSS_INFO acme> acme> https://lkml.org/lkml/2020/9/1/135 acme> acme> So perhaps in this case its better to disable that acme> -Werror,-Wcompound-token-split-by-macro when building with clang? Yes, I think that is probably the best solution. As far as I can tell, at least in this file and context, the warning appears harmless, as the "create a GNU C statement expression from two different macros" is very much intentional, based on the presence of PERL_USE_GCC_BRACE_GROUPS. The warning is fixed in upstream Perl by just avoiding creating GNU C statement expressions using STMT_START and STMT_END: https://github.com/Perl/perl5/issues/18780 https://github.com/Perl/perl5/pull/18984 If I am reading the source code correctly, an alternative to disabling the warning would be specifying -DPERL_GCC_BRACE_GROUPS_FORBIDDEN but it seems like that might end up impacting more than just this site, according to the issue discussion above. </quote> Based-on-a-patch-by:Sedat Dilek <sedat.dilek@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # Debian/Selfmade LLVM-14 (x86-64) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Fangrui Song <maskray@google.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Keeping <john@metanate.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Link: http://lore.kernel.org/lkml/YkxWcYzph5pC1EK8@kernel.org Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Just like its done for ldopts and for both in tools/perf/Makefile.config. Using `` to initialize PERL_EMBED_CCOPTS somehow precludes using: $(filter-out SOMETHING_TO_FILTER,$(PERL_EMBED_CCOPTS)) And we need to do it to allow for building with versions of clang where some gcc options selected by distros are not available. Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # Debian/Selfmade LLVM-14 (x86-64) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Fangrui Song <maskray@google.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Keeping <john@metanate.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Link: http://lore.kernel.org/lkml/YktYX2OnLtyobRYD@kernel.org Signed-off-by:
-
- 15 Feb, 2022 1 commit
-
-
Masahiro Yamada authored
$(or ...) is available since GNU Make 3.81, and useful to shorten the code in some places. Covert as follows: $(if A,A,B) --> $(or A,B) This patch also converts: $(if A, A, B) --> $(or A, B) Strictly speaking, the latter is not an equivalent conversion because GNU Make keeps spaces after commas; if A is not empty, $(if A, A, B) expands to " A", while $(or A, B) expands to "A". Anyway, preceding spaces are not significant in the code hunks I touched. Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Reviewed-by:
Nicolas Schier <nicolas@fjasle.eu>
-
- 08 Dec, 2021 1 commit
-
-
John Garry authored
The tools build system uses KBUILD_HOSTCFLAGS symbol for obvious purposes. However this is not set for anything under tools/ As such, host tools apps built have no compiler warnings enabled. Declare HOSTCFLAGS for perf tools build, and also use that symbol in declaration of host_c_flags. HOSTCFLAGS comes from EXTRA_WARNINGS, which is independent of target platform/arch warning flags. Suggested-by:
Jiri Olsa <jolsa@redhat.com> Signed-off-by:
John Garry <john.garry@huawei.com> Acked-by:
-
- 07 Dec, 2021 1 commit
-
-
Arnaldo Carvalho de Melo authored
Since 66dfdff0 ("perf tools: Add Python 3 support") we don't use the tools/build/feature/test-libpython-version.c version in any Makefile feature check: $ find tools/ -type f | xargs grep feature-libpython-version $ The only place where this was used was removed in 66dfdff0 : - ifneq ($(feature-libpython-version), 1) - $(warning Python 3 is not yet supported; please set) - $(warning PYTHON and/or PYTHON_CONFIG appropriately.) - $(warning If you also have Python 2 installed, then) - $(warning try something like:) - $(warning $(and ,)) - $(warning $(and ,) make PYTHON=python2) - $(warning $(and ,)) - $(warning Otherwise, disable Python support entirely:) - $(warning $(and ,)) - $(warning $(and ,) make NO_LIBPYTHON=1) - $(warning $(and ,)) - $(error $(and ,)) - else - LDFLAGS += $(PYTHON_EMBED_LDFLAGS) - EXTLIBS += $(PYTHON_EMBED_LIBADD) - LANG_BINDINGS += $(obj-perf)python/perf.so - $(call detected,CONFIG_LIBPYTHON) - endif And nowadays we either build with PYTHON=python3 or just install the python3 devel packages and perf will build against it. But the leftover feature-libpython-version check made the fast path feature detection to break in all cases except when python2 devel files were installed: $ rpm -qa | grep python.*devel python3-devel-3.9.7-1.fc34.x86_64 $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ; $ make -C tools/perf O=/tmp/build/perf install-bin make: Entering directory '/var/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j32' parallel build HOSTCC /tmp/build/perf/fixdep.o <SNIP> $ cat /tmp/build/perf/feature/test-all.make.output In file included from test-all.c:18: test-libpython-version.c:5:10: error: #error 5 | #error | ^~~~~ $ ldd ~/bin/perf | grep python libpython3.9.so.1.0 => /lib64/libpython3.9.so.1.0 (0x00007fda6dbcf000) $ As python3 is the norm these days, fix this by just removing the unused feature-libpython-version feature check, making the test-all fast path to work with the common case. With this: $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ; $ make -C tools/perf O=/tmp/build/perf install-bin |& head make: Entering directory '/var/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j32' parallel build HOSTCC /tmp/build/perf/fixdep.o HOSTLD /tmp/build/perf/fixdep-in.o LINK /tmp/build/perf/fixdep Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] $ ldd ~/bin/perf | grep python libpython3.9.so.1.0 => /lib64/libpython3.9.so.1.0 (0x00007f58800b0000) $ cat /tmp/build/perf/feature/test-all.make.output $ Reviewed-by:
James Clark <james.clark@arm.com> Fixes: 66dfdff0 ("perf tools: Add Python 3 support") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jaroslav Škarvada <jskarvad@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/YaYmeeC6CS2b8OSz@kernel.org Signed-off-by:
-
- 26 Nov, 2021 1 commit
-
-
Tiezhu Yang authored
Add the __NR_bpf definitions to fix the following build errors for mips: $ cd tools/bpf/bpftool $ make [...] bpf.c:54:4: error: #error __NR_bpf not defined. libbpf does not support your arch. # error __NR_bpf not defined. libbpf does not support your arch. ^~~~~ bpf.c: In function ‘sys_bpf’: bpf.c:66:17: error: ‘__NR_bpf’ undeclared (first use in this function); did you mean ‘__NR_brk’? return syscall(__NR_bpf, cmd, attr, size); ^~~~~~~~ __NR_brk [...] In file included from gen_loader.c:15:0: skel_internal.h: In function ‘skel_sys_bpf’: skel_internal.h:53:17: error: ‘__NR_bpf’ undeclared (first use in this function); did you mean ‘__NR_brk’? return syscall(__NR_bpf, cmd, attr, size); ^~~~~~~~ __NR_brk We can see the following generated definitions: $ grep -r "#define __NR_bpf" arch/mips arch/mips/include/generated/uapi/asm/unistd_o32.h:#define __NR_bpf (__NR_Linux + 355) arch/mips/include/generated/uapi/asm/unistd_n64.h:#define __NR_bpf (__NR_Linux + 315) arch/mips/include/generated/uapi/asm/unistd_n32.h:#define __NR_bpf (__NR_Linux + 319) The __NR_Linux is defined in arch/mips/include/uapi/asm/unistd.h: $ grep -r "#define __NR_Linux" arch/mips arch/mips/include/uapi/asm/unistd.h:#define __NR_Linux 4000 arch/mips/include/uapi/asm/unistd.h:#define __NR_Linux 5000 arch/mips/include/uapi/asm/unistd.h:#define __NR_Linux 6000 That is to say, __NR_bpf is: 4000 + 355 = 4355 for mips o32, 6000 + 319 = 6319 for mips n32, 5000 + 315 = 5315 for mips n64. So use the GCC pre-defined macro _ABIO32, _ABIN32 and _ABI64 [1] to define the corresponding __NR_bpf. This patch is similar with commit bad1926d ("bpf, s390: fix build for libbpf and selftest suite"). [1] https://gcc.gnu.org/git/?p=gcc.git;a=blob;f=gcc/config/mips/mips.h#l549 Signed-off-by:Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/1637804167-8323-1-git-send-email-yangtiezhu@loongson.cn
-
- 18 Nov, 2021 1 commit
-
-
Arnaldo Carvalho de Melo authored
The patch removing the feature-sync-compare-and-swap feature detection didn't remove the call to main_test_sync_compare_and_swap(), making the 'test-all' case fail an all the feature tests to be performed individually: $ cat /tmp/build/perf/feature/test-all.make.output In file included from test-all.c:18: test-libpython-version.c:5:10: error: #error 5 | #error | ^~~~~ test-all.c: In function ‘main’: test-all.c:203:9: error: implicit declaration of function ‘main_test_sync_compare_and_swap’ [-Werror=implicit-function-declaration] 203 | main_test_sync_compare_and_swap(argc, argv); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors $ Fix it, now to figure out what is that test-libpython-version.c problem... Fixes: 60fa754b ("tools: Remove feature-sync-compare-and-swap feature detection") Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/YZU9Fe0sgkHSXeC2@kernel.org Signed-off-by:
-
- 04 Nov, 2021 1 commit
-
-
Ian Rogers authored
LLVM 9 (current release is LLVM 13) moved the minimum C++ version to GNU++14. Bump the version numbers in the feature test and perf build. Reviewed-by:
Fangrui Song <maskray@google.com> Signed-off-by:
Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: llvm@lists.linux.dev Link: https://lore.kernel.org/r/20211012021321.291635-1-irogers@google.com Signed-off-by:
-
- 26 Oct, 2021 1 commit
-
-
John Keeping authored
Commit cbefd24f ("tools build: Add test to check if slang.h is in /usr/include/slang/") added a proper test to check whether slang.h is in a subdirectory, and commit 1955c8cf ("perf tools: Don't hardcode host include path for libslang") removed the include path for test-libslang.bin but missed test-all.bin. Apply the same change to test-all.bin. Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Fixes: 1955c8cf ("perf tools: Don't hardcode host include path for libslang") Signed-off-by:
John Keeping <john@metanate.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Terrell <terrelln@fb.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20211025172314.3766032-1-john@metanate.com Signed-off-by:
-
- 28 Sep, 2021 1 commit
-
-
Ian Rogers authored
Currently libtracefs isn't used by perf, but there are potential improvements by using it as identified Steven Rostedt's e-mail: https://lore.kernel.org/lkml/20210610154759.1ef958f0@oasis.local.home/ This change is modelled on the dynamic libtraceevent patch by Michael Petlan: https://lore.kernel.org/linux-perf-users/20210428092023.4009-1-mpetlan@redhat.com/ v3. Adds file missed in v1 and v2 spotted by Jiri Olsa. Signed-off-by:
-
- 03 Sep, 2021 1 commit
-
-
James Clark authored
OpenCSD v1.1.1 has a bug fix for the installation of the ETE decoder headers. This also means that including headers separately for each decoder is unnecessary so remove these. Reviewed-by:
Leo Yan <leo.yan@linaro.org> Signed-off-by:
Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https //lore.kernel.org/r/20210806134109.1182235-7-james.clark@arm.com Signed-off-by:
-
- 01 Sep, 2021 1 commit
-
-
James Clark authored
Currently the clean target when using O= isn't cleaning the feature detect output. This is because O= and OUTPUT= are set to canonical paths. For example in tools/perf/Makefile: FULL_O := $(shell cd $(PWD); readlink -f $(O) || echo $(O)) This means that OUTPUT ends in a / and most usages prepend it to a file without adding an extra /. This line that was changed adds an extra / before the 'feature' folder but not to the end, resulting in a clean command like this: rm -f /tmp/build//featuretest-all.bin ... After the change the clean command looks like this: rm -f /tmp/build/feature/test-all.bin ... Fixes: 762323eb ("perf build: Move feature cleanup under tools/build") Signed-off-by:
-
- 09 Aug, 2021 1 commit
-
-
Leo Yan authored
Since the __sync functions have been removed from perf, it's needless for perf tool to test the feature sync-compare-and-swap. The feature test is not used by any other components, remove it. Signed-off-by:
-
- 17 May, 2021 1 commit
-
-
Kees Cook authored
The tools quiet cmd output has mismatched indentation (and extra space character between cmd name and target name) compared to the rest of kbuild out: HOSTCC scripts/insert-sys-cert LD /srv/code/tools/objtool/arch/x86/objtool-in.o LD /srv/code/tools/objtool/libsubcmd-in.o AR /srv/code/tools/objtool/libsubcmd.a HOSTLD scripts/genksyms/genksyms CC scripts/mod/empty.o HOSTCC scripts/mod/mk_elfconfig CC scripts/mod/devicetable-offsets.s MKELF scripts/mod/elfconfig.h HOSTCC scripts/mod/modpost.o HOSTCC scripts/mod/file2alias.o HOSTCC scripts/mod/sumversion.o LD /srv/code/tools/objtool/objtool-in.o LINK /srv/code/tools/objtool/objtool HOSTLD scripts/mod/modpost CC kernel/bounds.s Adjust to match the rest of kbuild. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
- 29 Apr, 2021 2 commits
-
-
Arnaldo Carvalho de Melo authored
By setting FEATURE_DISPLAY_DEFERRED=1 a tool may ask for the printout of the detected features in tools/build/Makefile.feature to be done later adter extra feature checks are done that are tool specific. The perf tool will do it via its tools/perf/Makefile.config, as it performs such extra feature checks. Acked-by:
-
Michael Petlan authored
Currently we support only static linking with kernel's libtraceevent (tools/lib/traceevent). This patch adds libtraceevent package detection and support to link perf with it dynamically. The libtraceevent package status is displayed with: $ make VF=1 LIBTRACEEVENT_DYNAMIC=1 ... ... libtraceevent: [ on ] Default behavior remains the same (static linking). Committer testing: $ make LIBTRACEEVENT_DYNAMIC=1 VF=1 O=/tmp/build/perf -C tools/perf install-bin |& grep traceevent Makefile.config:1090: *** Error: No libtraceevent devel library found, please install libtraceevent-devel. Stop. $ Signed-off-by:
Michael Petlan <mpetlan@redhat.com> Tested-by:
-
- 24 Apr, 2021 1 commit
-
-
Masahiro Yamada authored
Since commit 57fd251c ("kbuild: split cc-option and friends to scripts/Makefile.compiler"), some kselftests fail to build. The tools/ directory opted out Kbuild, and went in a different direction. People copied scripts and Makefiles to the tools/ directory to create their own build system. tools/build/Build.include mimics scripts/Kbuild.include, but some tool Makefiles include the Kbuild one to import a feature that is missing in tools/build/Build.include: - Commit ec04aa3a ("tools/thermal: tmon: use "-fstack-protector" only if supported") included scripts/Kbuild.include from tools/thermal/tmon/Makefile to import the cc-option macro. - Commit c2390f16 ("selftests: kvm: fix for compilers that do not support -no-pie") included scripts/Kbuild.include from tools/testing/selftests/kvm/Makefile to import the try-run macro. - Commit 9cae4ace ("selftests/bpf: do not ignore clang failures") included scripts/Kbuild.include from tools/testing/selftests/bpf/Makefile to import the .DELETE_ON_ERROR target. - Commit 0695f8bc ("selftests/powerpc: Handle Makefile for unrecognized option") included scripts/Kbuild.include from tools/testing/selftests/powerpc/pmu/ebb/Makefile to import the try-run macro. Copy what they need into tools/build/Build.include, and make them include it instead of scripts/Kbuild.include. Link: https://lore.kernel.org/lkml/86dadf33-70f7-a5ac-cb8c-64966d2f45a1@linux.ibm.com/ Fixes: 57fd251c ("kbuild: split cc-option and friends to scripts/Makefile.compiler") Reported-by:
Janosch Frank <frankja@linux.ibm.com> Reported-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Yonghong Song <yhs@fb.com>
-
- 06 Mar, 2021 1 commit
-
-
Jiri Olsa authored
Arnaldo reported issue for following build command: $ rm -rf /tmp/krava; mkdir /tmp/krava; make O=/tmp/krava clean CLEAN config /bin/sh: line 0: cd: /tmp/krava/feature/: No such file or directory ../../scripts/Makefile.include:17: *** output directory "/tmp/krava/feature/" does not exist. Stop. make[1]: *** [Makefile.perf:1010: config-clean] Error 2 make: *** [Makefile:90: clean] Error 2 The problem is that now that we include scripts/Makefile.include in feature's Makefile (which is fine and needed), we need to ensure the OUTPUT directory exists, before executing (out of tree) clean command. Removing the feature's cleanup from perf Makefile and fixing feature's cleanup under build Makefile, so it now checks that there's existing OUTPUT directory before calling the clean. Fixes: 211a741c ("tools: Factor Clang, LLC and LLVM utils definitions") Reported-by:
-
- 29 Jan, 2021 1 commit
-
-
Sedat Dilek authored
When dealing with BPF/BTF/pahole and DWARF v5 I wanted to build bpftool. While looking into the source code I found duplicate assignments in misc tools for the LLVM eco system, e.g. clang and llvm-objcopy. Move the Clang, LLC and/or LLVM utils definitions to tools/scripts/Makefile.include file and add missing includes where needed. Honestly, I was inspired by the commit c8a950d0 ("tools: Factor HOSTCC, HOSTLD, HOSTAR definitions"). I tested with bpftool and perf on Debian/testing AMD64 and LLVM/Clang v11.1.0-rc1. Build instructions: [ make and make-options ] MAKE="make V=1" MAKE_OPTS="HOSTCC=clang HOSTCXX=clang++ HOSTLD=ld.lld CC=clang LD=ld.lld LLVM=1 LLVM_IAS=1" MAKE_OPTS="$MAKE_OPTS PAHOLE=/opt/pahole/bin/pahole" [ clean-up ] $MAKE $MAKE_OPTS -C tools/ clean [ bpftool ] $MAKE $MAKE_OPTS -C tools/bpf/bpftool/ [ perf ] PYTHON=python3 $MAKE $MAKE_OPTS -C tools/perf/ I was careful with respecting the user's wish to override custom compiler, linker, GNU/binutils and/or LLVM utils settings. Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> # tools/build and tools/perf Link: https://lore.kernel.org/bpf/20210128015117.20515-1-sedat.dilek@gmail.com
-
- 20 Jan, 2021 1 commit
-
-
James Clark authored
Replace the OCSD_INSTR switch statement with an if to fix compilation error about unhandled values and avoid this issue again in the future. Add new OCSD_GEN_TRC_ELEM_SYNC_MARKER and OCSD_GEN_TRC_ELEM_MEMTRANS enum values to fix unhandled value compilation error. Currently they are ignored. Increase the minimum version number to v1.0.0 now that new enum values are used that are only present in this version. Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by:
Mike Leach <mike.leach@linaro.org> Tested-by:
-
- 15 Jan, 2021 1 commit
-
-
Song Liu authored
BPF programs are useful in perf to profile BPF programs. BPF skeleton is by far the easiest way to write BPF tools. Enable building BPF skeletons in util/bpf_skel. A dummy bpf skeleton is added. More bpf skeletons will be added for different use cases. Signed-off-by:
Song Liu <songliubraving@fb.com> Tested-by:
Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kernel-team@fb.com Link: http://lore.kernel.org/lkml/20201229214214.3413833-3-songliubraving@fb.com Signed-off-by:
-
- 17 Dec, 2020 1 commit
-
-
Jiri Olsa authored
We're missing -lcap in test-all.bin target, so in case it's the only library missing (if more are missing test-all.bin fails anyway), we will falsely claim that we detected it and fail build, like: $ make ... Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... libbfd: [ on ] ... libbfd-buildid: [ on ] ... libcap: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... numa_num_possible_cpus: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libcrypto: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] ... libaio: [ on ] ... libzstd: [ on ] ... disassembler-four-args: [ on ] ... CC builtin-ftrace.o In file included from builtin-ftrace.c:29: util/cap.h:11:10: fatal error: sys/capability.h: No such file or directory 11 | #include <sys/capability.h> | ^~~~~~~~~~~~~~~~~~ compilation terminated. Fixes: 74d5f3d0 ("tools build: Add capability-related feature detection") Signed-off-by:
-
- 11 Nov, 2020 1 commit
-
-
Jean-Philippe Brucker authored
Several Makefiles in tools/ need to define the host toolchain variables. Move their definition to tools/scripts/Makefile.include Signed-off-by:
Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/bpf/20201110164310.2600671-2-jean-philippe@linaro.org
-
