- 21 Feb, 2024 3 commits
-
-
Madhavan Srinivasan authored
Base enablement patch to register performance monitoring hardware support for Power11. Most of fields are copied from power10_pmu struct for power11_pmu struct. Signed-off-by:
Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240221044623.1598642-2-mpe@ellerman.id.au
-
Madhavan Srinivasan authored
Add CPU table entries for raw and architected mode. Most fields are copied from the Power10 table entries. CPU, MMU and user (ELF_HWCAP) features are unchanged vs P10. However userspace can detect P11 because the AT_PLATFORM value changes to "power11". The logical PVR value of 0x0F000007, passed to firmware via the ibm_arch_vec, indicates the kernel can support a P11 compatible CPU, which means at least ISA v3.1 compliant. Signed-off-by:
-
Shrikanth Hegde authored
When an ifdef is used in the below manner, second one could be considered as duplicate. ifdef DEFINE_A ...code block... ifdef DEFINE_A <-- This is a duplicate. ...code block... endif else ifndef DEFINE_A <-- This is also duplicate. ...code block... endif endif More details about the script and methods used to find these code patterns are in cover letter of [1]. Few places in arch/powerpc where this pattern was seen: paca.h: Hunk1: Code is under check of CONFIG_PPC64 from line 13, hence the second CONFIG_PPC64 at line 166 is a duplicate. Hunk2: CONFIG_PPC_BOOK3S_64 was defined back to back. Merged the two ifdefs. asm-offsets.c: Code is under check of CONFIG_PPC64 from line 176 hence second CONFIG_PPC64 at line 249 is a duplicate. powermac/feature.c: #ifndef CONFIG_PPC64 is used at line 2066. And then in #else again #ifdef CONFIG_PPC64 is used. Which is a duplicate since in #else means CONFIG_PPC64 is defined. xmon.c: Code is under the check of CONFIG_SMP from line 521 hence the same check of CONFIG_SMP at line 646 is a duplicate. No functional change is intended here. It only aims to improve code readability. [1] https://lore.kernel.org/all/20240118080326.13137-1-sshegde@linux.ibm.com/Signed-off-by:
Shrikanth Hegde <sshegde@linux.ibm.com> Signed-off-by:
-
- 19 Feb, 2024 1 commit
-
-
Masahiro Yamada authored
Commit 2fb857bc ("powerpc/kcsan: Add exclusions from instrumentation") added KCSAN_SANITIZE_early_64.o to arch/powerpc/kernel/Makefile, while it does not compile early_64.o. Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
-
- 16 Feb, 2024 8 commits
-
-
Peter Bergner authored
The powerpc toolchain keeps a copy of the HWCAP bit masks in the TCB for fast access by the __builtin_cpu_supports() built-in function. The TCB space for the HWCAP entries - which are created in pairs - is an ABI extension, so waiting to create the space for HWCAP3 and HWCAP4 until they are needed is problematic. Define AT_HWCAP3 and AT_HWCAP4 in the generic uapi header so they can be used in glibc to reserve space in the powerpc TCB for their future use. I scanned through the Linux and GLIBC source codes looking for unused AT_* values and 29 and 30 did not seem to be used, so they are what I went with. Signed-off-by:
Peter Bergner <bergner@linux.ibm.com> Acked-by:
Adhemerval Zanella <adhemerval.zanella@linaro.org> Acked-by:
Nicholas Piggin <npiggin@gmail.com> Acked-by:
Szabolcs Nagy <szabolcs.nagy@arm.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
- 14 Feb, 2024 11 commits
-
-
Ricardo B. Marliere authored
Since commit d492cc25 ("driver core: device.h: make struct bus_type a const *"), the driver core can properly handle constant struct bus_type, move the ibmebus_bus_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Suggested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
"Ricardo B. Marliere" <ricardo@marliere.net> Reviewed-by:
-
Ricardo B. Marliere authored
Since commit d492cc25 ("driver core: device.h: make struct bus_type a const *"), the driver core can properly handle constant struct bus_type, move the macio_bus_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Suggested-by:
-
Ricardo B. Marliere authored
Since commit d492cc25 ("driver core: device.h: make struct bus_type a const *"), the driver core can properly handle constant struct bus_type, move the mpic_subsys variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Suggested-by:
-
Ricardo B. Marliere authored
Since commit d492cc25 ("driver core: device.h: make struct bus_type a const *"), the driver core can properly handle constant struct bus_type, move the vio_bus_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Suggested-by:
-
Ricardo B. Marliere authored
In order to make the distinction of the vio_bus_type variable based on CONFIG_PPC_SMLPAR more explicit, move the required structs into a new ifdef block. This is needed in order to make vio_bus_type const and because the distinction is made explicit, there is no need to set the fields within the vio_cmo_sysfs_init function. Signed-off-by:
-
Christophe Leroy authored
arch_vmap_pud_supported() and arch_vmap_pmd_supported() are expected to constant-fold to false when RADIX is not enabled. Force inlining in order to avoid following failure which leads to unexpected call of non-existing pud_set_huge() and pmd_set_huge() on powerpc 8xx. In function 'pud_huge_tests', inlined from 'debug_vm_pgtable' at mm/debug_vm_pgtable.c:1399:2: ./arch/powerpc/include/asm/vmalloc.h:9:33: warning: inlining failed in call to 'arch_vmap_pud_supported.isra': call is unlikely and code size would grow [-Winline] 9 | #define arch_vmap_pud_supported arch_vmap_pud_supported | ^~~~~~~~~~~~~~~~~~~~~~~ ./arch/powerpc/include/asm/vmalloc.h:10:20: note: in expansion of macro 'arch_vmap_pud_supported' 10 | static inline bool arch_vmap_pud_supported(pgprot_t prot) | ^~~~~~~~~~~~~~~~~~~~~~~ ./arch/powerpc/include/asm/vmalloc.h:9:33: note: called from here 9 | #define arch_vmap_pud_supported arch_vmap_pud_supported mm/debug_vm_pgtable.c:458:14: note: in expansion of macro 'arch_vmap_pud_supported' 458 | if (!arch_vmap_pud_supported(args->page_prot) || | ^~~~~~~~~~~~~~~~~~~~~~~ Reported-by:kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202402131836.OU1TDuoi-lkp@intel.com/ Fixes: 8309c9d7 ("powerpc: inline huge vmap supported functions") Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
Michael Ellerman authored
If nr_cpu_ids is too low to include the boot CPU, remap the boot CPU onto logical core 0. This is achieved in two stages. In early_init_dt_scan_cpus() the boot CPU is renumbered to be on logical core 0, and the original boot core's hardware ID is recorded. Later in smp_setup_cpu_maps(), if the original boot core ID is set, the logical CPU numbers on the 0th core are skipped in the normal device tree search over CPU device tree nodes. Then the search is continued until the device tree node matching the boot core is found, and those CPUs are assigned the CPU numbers starting at 0. This allows kdump kernels to be booted with low values for nr_cpu_ids to conserve memory, while also allowing the crashing/boot CPU to be any CPU. Signed-off-by:
Wen Xiong <wenxiong@us.ibm.com> Link: https://msgid.link/20231229120107.2281153-5-mpe@ellerman.id.au
-
Michael Ellerman authored
Factor out the for loop that assigns CPU numbers to threads of a core. The function takes the next CPU number to use as input, and returns the next available CPU number after the threads has been assigned. This will allow a subsequent change to assign threads out of order. Signed-off-by:
-
Michael Ellerman authored
The of_device_is_available() check only needs to be done once per device node, there's no need to repeat it for each thread. Move it out of the loop. Signed-off-by:
-
Michael Ellerman authored
If nr_cpu_ids is too low to include the boot CPU adjust nr_cpu_ids upward. Otherwise the kernel will BUG when trying to allocate a paca for the boot CPU and fail to boot. Cc: stable@vger.kernel.org Signed-off-by:
-
Michael Ellerman authored
If nr_cpu_ids is too low to include at least all the threads of a single core adjust nr_cpu_ids upwards. This avoids triggering odd bugs in code that assumes all threads of a core are available. Cc: stable@vger.kernel.org Signed-off-by:
-
- 29 Jan, 2024 1 commit
-
-
Linus Torvalds authored
-
- 28 Jan, 2024 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxlLinus Torvalds authored
Pull cxl fixes from Dan Williams: "A build regression fix, a device compatibility fix, and an original bug preventing creation of large (16 device) interleave sets: - Fix unit test build regression fallout from global "missing-prototypes" change - Fix compatibility with devices that do not support interrupts - Fix overflow when calculating the capacity of large interleave sets" * tag 'cxl-fixes-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: cxl/region：Fix overflow issue in alloc_hpa() cxl/pci: Skip irq features if MSI/MSI-X are not supported tools/testing/nvdimm: Disable "missing prototypes / declarations" warnings tools/testing/cxl: Disable "missing prototypes / declarations" warnings -
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Thomas Bogendoerfer: - fix boot issue on single core Lantiq Danube devices - fix boot issue on Loongson64 platforms - fix improper FPU setup - fix missing prototypes issues * tag 'mips-fixes_6.8_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: mips: Call lose_fpu(0) before initializing fcr31 in mips_set_personality_nan MIPS: loongson64: set nid for reserved memblock region Revert "MIPS: loongson64: set nid for reserved memblock region" MIPS: lantiq: register smp_ops on non-smp platforms MIPS: loongson64: set nid for reserved memblock region MIPS: reserve exception vector space ONLY ONCE MIPS: BCM63XX: Fix missing prototypes MIPS: sgi-ip32: Fix missing prototypes MIPS: sgi-ip30: Fix missing prototypes MIPS: fw arc: Fix missing prototypes MIPS: sgi-ip27: Fix missing prototypes MIPS: Alchemy: Fix missing prototypes MIPS: Cobalt: Fix missing prototypes
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fix from Borislav Petkov: - Prevent an inconsistent futex operation leading to stale state exposure * tag 'locking_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Prevent the reuse of stale pi_state
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Borislav Petkov: - Initialize the resend node of each IRQ descriptor, not only the first one * tag 'irq_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Initialize resend_node hlist for all interrupt descriptors
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Borislav Petkov: - Preserve the number of idle calls and sleep entries across CPU hotplug events in order to be able to compute correct averages - Limit the duration of the clocksource watchdog checking interval as too long intervals lead to wrongly marking the TSC as unstable * tag 'timers_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick/sched: Preserve number of idle sleeps across CPU hotplug events clocksource: Skip watchdog check for large watchdog intervals
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - Make sure 32-bit syscall registers are properly sign-extended - Add detection for AMD's Zen5 generation CPUs and Intel's Clearwater Forest CPU model number - Make a stub function export non-GPL because it is part of the paravirt alternatives and that can be used by non-GPL code * tag 'x86_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/CPU/AMD: Add more models to X86_FEATURE_ZEN5 x86/entry/ia32: Ensure s32 is sign extended to s64 x86/cpu: Add model number for Intel Clearwater Forest processor x86/CPU/AMD: Add X86_FEATURE_ZEN5 x86/paravirt: Make BUG_func() usable by non-GPL modules
-
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblockLinus Torvalds authored
Pull memblock fix from Mike Rapoport: "Fix crash when reserved memory is not added to memory. When CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, the initialization of reserved pages may cause access of NODE_DATA() with invalid nid and crash. Add a fall back to early_pfn_to_nid() in memmap_init_reserved_pages() to ensure a valid node id is always passed to init_reserved_page()" * tag 'fixes-2024-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: memblock: fix crash when reserved memory is not added to memory
-
- 27 Jan, 2024 9 commits
-
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: - WMI bus driver fixes - Second attempt (previously reverted) at P2SB PCI rescan deadlock fix - AMD PMF driver improvements - MAINTAINERS updates - Misc other small fixes and hw-id additions * tag 'platform-drivers-x86-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: touchscreen_dmi: Add info for the TECLAST X16 Plus tablet platform/x86/intel/ifs: Call release_firmware() when handling errors. platform/x86/amd/pmf: Fix memory leak in amd_pmf_get_pb_data() platform/x86/amd/pmf: Get ambient light information from AMD SFH driver platform/x86/amd/pmf: Get Human presence information from AMD SFH driver platform/mellanox: mlxbf-pmc: Fix offset calculation for crspace events platform/mellanox: mlxbf-tmfifo: Drop Tx network packet when Tx TmFIFO is full MAINTAINERS: remove defunct acpi4asus project info from asus notebooks section MAINTAINERS: add Luke Jones as maintainer for asus notebooks MAINTAINERS: Remove Perry Yuan as DELL WMI HARDWARE PRIVACY SUPPORT maintainer platform/x86: silicom-platform: Add missing "Description:" for power_cycle sysfs attr platform/x86: intel-wmi-sbl-fw-update: Fix function name in error message platform/x86: p2sb: Use pci_resource_n() in p2sb_read_bar0() platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe platform/x86: intel-uncore-freq: Fix types in sysfs callbacks platform/x86: wmi: Fix wmi_dev_probe() platform/x86: wmi: Fix notify callback locking platform/x86: wmi: Decouple legacy WMI notify handlers from wmi_block_list platform/x86: wmi: Return immediately if an suitable WMI event is found platform/x86: wmi: Fix error handling in legacy WMI notify handler functions
-
Linus Torvalds authored
Merge tag 'loongarch-fixes-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Fix boot failure on machines with more than 8 nodes, and fix two build errors about KVM" * tag 'loongarch-fixes-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: KVM: Add returns to SIMD stubs LoongArch: KVM: Fix build due to API changes LoongArch/smp: Call rcutree_report_cpu_starting() at tlb_init()
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fix from Chandan Babu: - Fix read only mounts when using fsopen mount API * tag 'xfs-6.8-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: read only mounts with fsopen mount API are busted
-
https://evilpiepirate.org/git/bcachefsLinus Torvalds authored
Pull bcachefs fixes from Kent Overstreet: - fix for REQ_OP_FLUSH usage; this fixes filesystems going read only with -EOPNOTSUPP from the block layer. (this really should have gone in with the block layer patch causing the -EOPNOTSUPP, or should have gone in before). - fix an allocation in non-sleepable context - fix one source of srcu lock latency, on devices with terrible discard latency - fix a reattach_inode() issue in fsck * tag 'bcachefs-2024-01-26' of https://evilpiepirate.org/git/bcachefs: bcachefs: __lookup_dirent() works in snapshot, not subvol bcachefs: discard path uses unlock_long() bcachefs: fix incorrect usage of REQ_OP_FLUSH bcachefs: Add gfp flags param to bch2_prt_task_backtrace()
-
git://git.samba.org/ksmbdLinus Torvalds authored
Pull smb server fixes from Steve French: - Fix netlink OOB - Minor kernel doc fix * tag '6.8-rc2-smb3-server-fixes' of git://git.samba.org/ksmbd: ksmbd: fix global oob in ksmbd_nl_policy smb: Fix some kernel-doc comments
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smb client fixes from Steve French: "Nine cifs/smb client fixes - Four network error fixes (three relating to replays of requests that need to be retried, and one fixing some places where we were returning the wrong rc up the stack on network errors) - Two multichannel fixes including locking fix and case where subset of channels need reconnect - netfs integration fixup: share remote i_size with netfslib - Two small cleanups (one for addressing a clang warning)" * tag '6.8-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix stray unlock in cifs_chan_skip_or_disable cifs: set replay flag for retries of write command cifs: commands that are retried should have replay flag set cifs: helper function to check replayable error codes cifs: translate network errors on send to -ECONNABORTED cifs: cifs_pick_channel should try selecting active channels cifs: Share server EOF pos with netfslib smb: Work around Clang __bdos() type confusion smb: client: delete "true", "false" defines -
Xi Ruoyao authored
If we still own the FPU after initializing fcr31, when we are preempted the dirty value in the FPU will be read out and stored into fcr31, clobbering our setting. This can cause an improper floating-point environment after execve(). For example: zsh% cat measure.c #include <fenv.h> int main() { return fetestexcept(FE_INEXACT); } zsh% cc measure.c -o measure -lm zsh% echo $((1.0/3)) # raising FE_INEXACT 0.33333333333333331 zsh% while ./measure; do ; done (stopped in seconds) Call lose_fpu(0) before setting fcr31 to prevent this. Closes: https://lore.kernel.org/linux-mips/7a6aa1bbdbbe2e63ae96ff163fab0349f58f1b9e.camel@xry111.site/ Fixes: 9b26616c ("MIPS: Respect the ISA level in FCSR handling") Cc: stable@vger.kernel.org Signed-off-by:Xi Ruoyao <xry111@xry111.site> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Huang Pei authored
Commit 61167ad5("mm: pass nid to reserve_bootmem_region()") reveals that reserved memblock regions have no valid node id set, just set it right since loongson64 firmware makes it clear in memory layout info. This works around booting failure on 3A1000+ since commit 61167ad5 ("mm: pass nid to reserve_bootmem_region()") under CONFIG_DEFERRED_STRUCT_PAGE_INIT. Signed-off-by:
Huang Pei <huangpei@loongson.cn> Signed-off-by:
-
Thomas Bogendoerfer authored
This reverts commit ce7b1b97. Signed-off-by:
-
