- 23 Dec, 2021 6 commits
-
-
Hayes Wang authored
There are some chances that the actual base of hardware is different from the value recorded by driver, so we have to reset the variable of ocp_base to sync it. Set ocp_base to -1. Then, it would be updated and the new base would be set to the hardware next time. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Hayes Wang authored
It needs to set mdio force mode. Otherwise, link off always occurs when setting force speed. Fixes: 195aae32 ("r8152: support new chips") Signed-off-by:
-
Remi Pommarel authored
Commit 561d8352 ("bridge: use ndo_siocdevprivate") changed the source and destination arguments of copy_{to,from}_user in bridge's old_deviceless() from args[1] to uarg breaking SIOC{G,S}IFBR ioctls. Commit cbd7ad29 ("net: bridge: fix ioctl old_deviceless bridge argument") fixed only BRCTL_{ADD,DEL}_BRIDGES commands leaving BRCTL_GET_BRIDGES one untouched. The fixes BRCTL_GET_BRIDGES as well and has been tested with busybox's brctl. Example of broken brctl: $ brctl show bridge name bridge id STP enabled interfaces brctl: can't get bridge name for index 0: No such device or address Example of fixed brctl: $ brctl show bridge name bridge id STP enabled interfaces br0 8000.000000000000 no Fixes: 561d8352 ("bridge: use ndo_siocdevprivate") Signed-off-by:
Remi Pommarel <repk@triplefau.lt> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/all/20211223153139.7661-2-repk@triplefau.lt/Signed-off-by:
-
Xiaoliang Yang authored
Convert the u32 variable to type u64 in a context where expression of type u64 is required to avoid potential overflow. Fixes: e9e37200 ("net: stmmac: ptp: update tas basetime after ptp adjust") Signed-off-by:
Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Link: https://lore.kernel.org/r/20211223073928.37371-1-xiaoliang.yang_1@nxp.comSigned-off-by:
-
Xiaoliang Yang authored
For Ocelot switches, the CPU injected frames have an injection header where it can specify the QoS class of the packet and the DSA tag, now it uses the SKB priority to set that. If a traffic class to priority mapping is configured on the netdevice (with mqprio for example ...), it won't be considered for CPU injected headers. This patch make the QoS class aligned to the priority to traffic class mapping if it exists. Fixes: 8dce89aa ("net: dsa: ocelot: add tagger for Ocelot/Felix switches") Signed-off-by:
Marouen Ghodhbane <marouen.ghodhbane@nxp.com> Link: https://lore.kernel.org/r/20211223072211.33130-1-xiaoliang.yang_1@nxp.comSigned-off-by:
-
Paolo Abeni authored
After commit d3256efd ("veth: allow enabling NAPI even without XDP"), if GRO is enabled on a veth device and TSO is disabled on the peer device, TCP skbs will go through the NAPI callback. If there is no XDP program attached, the veth code does not perform any share check, and shared/cloned skbs could enter the GRO engine. Ignat reported a BUG triggered later-on due to the above condition: [ 53.970529][ C1] kernel BUG at net/core/skbuff.c:3574! [ 53.981755][ C1] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI [ 53.982634][ C1] CPU: 1 PID: 19 Comm: ksoftirqd/1 Not tainted 5.16.0-rc5+ #25 [ 53.982634][ C1] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [ 53.982634][ C1] RIP: 0010:skb_shift+0x13ef/0x23b0 [ 53.982634][ C1] Code: ea 03 0f b6 04 02 48 89 fa 83 e2 07 38 d0 7f 08 84 c0 0f 85 41 0c 00 00 41 80 7f 02 00 4d 8d b5 d0 00 00 00 0f 85 74 f5 ff ff <0f> 0b 4d 8d 77 20 be 04 00 00 00 4c 89 44 24 78 4c 89 f7 4c 89 8c [ 53.982634][ C1] RSP: 0018:ffff8881008f7008 EFLAGS: 00010246 [ 53.982634][ C1] RAX: 0000000000000000 RBX: ffff8881180b4c80 RCX: 0000000000000000 [ 53.982634][ C1] RDX: 0000000000000002 RSI: ffff8881180b4d3c RDI: ffff88810bc9cac2 [ 53.982634][ C1] RBP: ffff8881008f70b8 R08: ffff8881180b4cf4 R09: ffff8881180b4cf0 [ 53.982634][ C1] R10: ffffed1022999e5c R11: 0000000000000002 R12: 0000000000000590 [ 53.982634][ C1] R13: ffff88810f940c80 R14: ffff88810f940d50 R15: ffff88810bc9cac0 [ 53.982634][ C1] FS: 0000000000000000(0000) GS:ffff888235880000(0000) knlGS:0000000000000000 [ 53.982634][ C1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.982634][ C1] CR2: 00007ff5f9b86680 CR3: 0000000108ce8004 CR4: 0000000000170ee0 [ 53.982634][ C1] Call Trace: [ 53.982634][ C1] <TASK> [ 53.982634][ C1] tcp_sacktag_walk+0xaba/0x18e0 [ 53.982634][ C1] tcp_sacktag_write_queue+0xe7b/0x3460 [ 53.982634][ C1] tcp_ack+0x2666/0x54b0 [ 53.982634][ C1] tcp_rcv_established+0x4d9/0x20f0 [ 53.982634][ C1] tcp_v4_do_rcv+0x551/0x810 [ 53.982634][ C1] tcp_v4_rcv+0x22ed/0x2ed0 [ 53.982634][ C1] ip_protocol_deliver_rcu+0x96/0xaf0 [ 53.982634][ C1] ip_local_deliver_finish+0x1e0/0x2f0 [ 53.982634][ C1] ip_sublist_rcv_finish+0x211/0x440 [ 53.982634][ C1] ip_list_rcv_finish.constprop.0+0x424/0x660 [ 53.982634][ C1] ip_list_rcv+0x2c8/0x410 [ 53.982634][ C1] __netif_receive_skb_list_core+0x65c/0x910 [ 53.982634][ C1] netif_receive_skb_list_internal+0x5f9/0xcb0 [ 53.982634][ C1] napi_complete_done+0x188/0x6e0 [ 53.982634][ C1] gro_cell_poll+0x10c/0x1d0 [ 53.982634][ C1] __napi_poll+0xa1/0x530 [ 53.982634][ C1] net_rx_action+0x567/0x1270 [ 53.982634][ C1] __do_softirq+0x28a/0x9ba [ 53.982634][ C1] run_ksoftirqd+0x32/0x60 [ 53.982634][ C1] smpboot_thread_fn+0x559/0x8c0 [ 53.982634][ C1] kthread+0x3b9/0x490 [ 53.982634][ C1] ret_from_fork+0x22/0x30 [ 53.982634][ C1] </TASK> Address the issue by skipping the GRO stage for shared or cloned skbs. To reduce the chance of OoO, try to unclone the skbs before giving up. v1 -> v2: - use avoid skb_copy and fallback to netif_receive_skb - Eric Reported-by:
Ignat Korchagin <ignat@cloudflare.com> Fixes: d3256efd ("veth: allow enabling NAPI even without XDP") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Tested-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/b5f61c5602aab01bac8d711d8d1bfab0a4817db7.1640197544.git.pabeni@redhat.comSigned-off-by:
-
- 22 Dec, 2021 8 commits
-
-
Pavel Skripkin authored
If asix_read_cmd() returns 0 on 30th interation, 0 will be returned from asix_check_host_enable(), which is logically wrong. Fix it by returning -ETIMEDOUT explicitly if we have exceeded 30 iterations Also, replaced 30 with #define as suggested by Andrew Fixes: a786e319 ("net: asix: fix uninit value bugs") Reported-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Reviewed-by:
-
Pavel Skripkin authored
asix_read_cmd() may read less than sizeof(smsr) bytes and in this case smsr will be uninitialized. Fail log: BUG: KMSAN: uninit-value in asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] BUG: KMSAN: uninit-value in asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] drivers/net/usb/asix_common.c:497 BUG: KMSAN: uninit-value in asix_mdio_read+0x3c1/0xb00 drivers/net/usb/asix_common.c:497 drivers/net/usb/asix_common.c:497 asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] drivers/net/usb/asix_common.c:497 asix_mdio_read+0x3c1/0xb00 drivers/net/usb/asix_common.c:497 drivers/net/usb/asix_common.c:497 Fixes: d9fe64e5 ("net: asix: Add in_pm parameter") Reported-and-tested-by: syzbot+f44badb06036334e867a@syzkaller.appspotmail.com Reviewed-by:
-
Jiasheng Jiang authored
Because of the possible failure of the kcalloc, it should be better to set rx_queue->page_ptr_mask to 0 when it happens in order to maintain the consistency. Fixes: 5a6681e2 ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver") Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by:
Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/20211220140344.978408-1-jiasheng@iscas.ac.cnSigned-off-by:
-
Jiasheng Jiang authored
Because of the possible failure of the kcalloc, it should be better to set rx_queue->page_ptr_mask to 0 when it happens in order to maintain the consistency. Fixes: 5a6681e2 ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver") Signed-off-by:
-
Jiasheng Jiang authored
Because platform_get_irq() could fail and return error irq. Therefore, it might be better to check it if order to avoid the use of error irq. Fixes: 797047f8 ("net: ks8851: Implement Parallel bus operations") Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiasheng Jiang authored
Because platform_get_irq() could fail and return error irq. Therefore, it might be better to check it if order to avoid the use of error irq. Fixes: ae150435 ("smsc: Move the SMC (SMSC) drivers") Signed-off-by:
-
Jiasheng Jiang authored
I find that platform_get_irq() will not always succeed. It will return error irq in case of the failure. Therefore, it might be better to check it if order to avoid the use of error irq. Fixes: 658d439b ("fjes: Introduce FUJITSU Extended Socket Network Device driver") Signed-off-by:
-
Fernando Fernandez Mancera authored
When 802.3ad bond mode is configured the ad_actor_system option is set to "00:00:00:00:00:00". But when trying to set the all-zeroes MAC as actors' system address it was failing with EINVAL. An all-zeroes ethernet address is valid, only multicast addresses are not valid values. Fixes: 171a42c3 ("bonding: add netlink support for sys prio, actor sys mac, and port key") Signed-off-by:
Fernando Fernandez Mancera <ffmancera@riseup.net> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20211221111345.2462-1-ffmancera@riseup.netSigned-off-by:
-
- 21 Dec, 2021 6 commits
-
-
Heiner Kallweit authored
Recent net core changes caused an issue with few Intel drivers (reportedly igb), where taking RTNL in RPM resume path results in a deadlock. See [0] for a bug report. I don't think the core changes are wrong, but taking RTNL in RPM resume path isn't needed. The Intel drivers are the only ones doing this. See [1] for a discussion on the issue. Following patch changes the RPM resume path to not take RTNL. [0] https://bugzilla.kernel.org/show_bug.cgi?id=215129 [1] https://lore.kernel.org/netdev/20211125074949.5f897431@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/t/ Fixes: bd869245 ("net: core: try to runtime-resume detached device in __dev_open") Fixes: f32a2137 ("ethtool: runtime-resume netdev parent before ethtool ioctl ops") Tested-by:
Martin Stolpe <martin.stolpe@gmail.com> Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20211220201844.2714498-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jeroen de Borst authored
The legacy raw addressing device option was processed before the new RDA queue format option. This caused the supported features mask, which is provided only on the RDA queue format option, not to be set. This disabled jumbo-frame support when using raw adressing. Fixes: 255489f5 ("gve: Add a jumbo-frame device option") Signed-off-by:
Jeroen de Borst <jeroendb@google.com> Link: https://lore.kernel.org/r/20211220192746.2900594-1-jeroendb@google.comSigned-off-by:
-
Willem de Bruijn authored
virtio_net_hdr_set_proto infers skb->protocol from the virtio_net_hdr gso_type, to avoid packets getting dropped for lack of a proto type. Its protocol choice is a guess, especially in the case of UFO, where the single VIRTIO_NET_HDR_GSO_UDP label covers both UFOv4 and UFOv6. Skip this best effort if the field is already initialized. Whether explicitly from userspace, or implicitly based on an earlier call to dev_parse_header_protocol (which is more robust, but was introduced after this patch). Fixes: 9d2f67e4 ("net/packet: fix packet drop as of virtio gso") Signed-off-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20211220145027.2784293-1-willemdebruijn.kernel@gmail.comSigned-off-by:
-
Willem de Bruijn authored
Skb with skb->protocol 0 at the time of virtio_net_hdr_to_skb may have a protocol inferred from virtio_net_hdr with virtio_net_hdr_set_proto. Unlike TCP, UDP does not have separate types for IPv4 and IPv6. Type VIRTIO_NET_HDR_GSO_UDP is guessed to be IPv4/UDP. As of the below commit, UFOv6 packets are dropped due to not matching the protocol as obtained from dev_parse_header_protocol. Invert the test to take that L2 protocol field as starting point and pass both UFOv4 and UFOv6 for VIRTIO_NET_HDR_GSO_UDP. Fixes: 924a9bc3 ("net: check if protocol extracted by virtio_net_hdr_set_proto is correct") Link: https://lore.kernel.org/netdev/CABcq3pG9GRCYqFDBAJ48H1vpnnX=41u+MhQnayF1ztLH4WX0Fw@mail.gmail.com/Reported-by:
Andrew Melnichenko <andrew@daynix.com> Signed-off-by:
-
Willem de Bruijn authored
Tiny doc fix. The hardware transmit function was called skb_tstamp_tx from its introduction in commit ac45f602 ("net: infrastructure for hardware time stamping") in the same series as this documentation. Fixes: cb9eff09 ("net: new user space API for time stamping of incoming and outgoing packets") Signed-off-by:
-
Eric Dumazet authored
syzbot reported various issues around early demux, one being included in this changelog [1] sk->sk_rx_dst is using RCU protection without clearly documenting it. And following sequences in tcp_v4_do_rcv()/tcp_v6_do_rcv() are not following standard RCU rules. [a] dst_release(dst); [b] sk->sk_rx_dst = NULL; They look wrong because a delete operation of RCU protected pointer is supposed to clear the pointer before the call_rcu()/synchronize_rcu() guarding actual memory freeing. In some cases indeed, dst could be freed before [b] is done. We could cheat by clearing sk_rx_dst before calling dst_release(), but this seems the right time to stick to standard RCU annotations and debugging facilities. [1] BUG: KASAN: use-after-free in dst_check include/net/dst.h:470 [inline] BUG: KASAN: use-after-free in tcp_v4_early_demux+0x95b/0x960 net/ipv4/tcp_ipv4.c:1792 Read of size 2 at addr ffff88807f1cb73a by task syz-executor.5/9204 CPU: 0 PID: 9204 Comm: syz-executor.5 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x320 mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:450 dst_check include/net/dst.h:470 [inline] tcp_v4_early_demux+0x95b/0x960 net/ipv4/tcp_ipv4.c:1792 ip_rcv_finish_core.constprop.0+0x15de/0x1e80 net/ipv4/ip_input.c:340 ip_list_rcv_finish.constprop.0+0x1b2/0x6e0 net/ipv4/ip_input.c:583 ip_sublist_rcv net/ipv4/ip_input.c:609 [inline] ip_list_rcv+0x34e/0x490 net/ipv4/ip_input.c:644 __netif_receive_skb_list_ptype net/core/dev.c:5508 [inline] __netif_receive_skb_list_core+0x549/0x8e0 net/core/dev.c:5556 __netif_receive_skb_list net/core/dev.c:5608 [inline] netif_receive_skb_list_internal+0x75e/0xd80 net/core/dev.c:5699 gro_normal_list net/core/dev.c:5853 [inline] gro_normal_list net/core/dev.c:5849 [inline] napi_complete_done+0x1f1/0x880 net/core/dev.c:6590 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline] virtnet_poll+0xca2/0x11b0 drivers/net/virtio_net.c:1557 __napi_poll+0xaf/0x440 net/core/dev.c:7023 napi_poll net/core/dev.c:7090 [inline] net_rx_action+0x801/0xb40 net/core/dev.c:7177 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 invoke_softirq kernel/softirq.c:432 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637 irq_exit_rcu+0x5/0x20 kernel/softirq.c:649 common_interrupt+0x52/0xc0 arch/x86/kernel/irq.c:240 asm_common_interrupt+0x1e/0x40 arch/x86/include/asm/idtentry.h:629 RIP: 0033:0x7f5e972bfd57 Code: 39 d1 73 14 0f 1f 80 00 00 00 00 48 8b 50 f8 48 83 e8 08 48 39 ca 77 f3 48 39 c3 73 3e 48 89 13 48 8b 50 f8 48 89 38 49 8b 0e <48> 8b 3e 48 83 c3 08 48 83 c6 08 eb bc 48 39 d1 72 9e 48 39 d0 73 RSP: 002b:00007fff8a413210 EFLAGS: 00000283 RAX: 00007f5e97108990 RBX: 00007f5e97108338 RCX: ffffffff81d3aa45 RDX: ffffffff81d3aa45 RSI: 00007f5e97108340 RDI: ffffffff81d3aa45 RBP: 00007f5e97107eb8 R08: 00007f5e97108d88 R09: 0000000093c2e8d9 R10: 0000000000000000 R11: 0000000000000000 R12: 00007f5e97107eb0 R13: 00007f5e97108338 R14: 00007f5e97107ea8 R15: 0000000000000019 </TASK> Allocated by task 13: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:434 [inline] __kasan_slab_alloc+0x90/0xc0 mm/kasan/common.c:467 kasan_slab_alloc include/linux/kasan.h:259 [inline] slab_post_alloc_hook mm/slab.h:519 [inline] slab_alloc_node mm/slub.c:3234 [inline] slab_alloc mm/slub.c:3242 [inline] kmem_cache_alloc+0x202/0x3a0 mm/slub.c:3247 dst_alloc+0x146/0x1f0 net/core/dst.c:92 rt_dst_alloc+0x73/0x430 net/ipv4/route.c:1613 ip_route_input_slow+0x1817/0x3a20 net/ipv4/route.c:2340 ip_route_input_rcu net/ipv4/route.c:2470 [inline] ip_route_input_noref+0x116/0x2a0 net/ipv4/route.c:2415 ip_rcv_finish_core.constprop.0+0x288/0x1e80 net/ipv4/ip_input.c:354 ip_list_rcv_finish.constprop.0+0x1b2/0x6e0 net/ipv4/ip_input.c:583 ip_sublist_rcv net/ipv4/ip_input.c:609 [inline] ip_list_rcv+0x34e/0x490 net/ipv4/ip_input.c:644 __netif_receive_skb_list_ptype net/core/dev.c:5508 [inline] __netif_receive_skb_list_core+0x549/0x8e0 net/core/dev.c:5556 __netif_receive_skb_list net/core/dev.c:5608 [inline] netif_receive_skb_list_internal+0x75e/0xd80 net/core/dev.c:5699 gro_normal_list net/core/dev.c:5853 [inline] gro_normal_list net/core/dev.c:5849 [inline] napi_complete_done+0x1f1/0x880 net/core/dev.c:6590 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline] virtnet_poll+0xca2/0x11b0 drivers/net/virtio_net.c:1557 __napi_poll+0xaf/0x440 net/core/dev.c:7023 napi_poll net/core/dev.c:7090 [inline] net_rx_action+0x801/0xb40 net/core/dev.c:7177 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 Freed by task 13: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 kasan_set_track+0x21/0x30 mm/kasan/common.c:46 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370 ____kasan_slab_free mm/kasan/common.c:366 [inline] ____kasan_slab_free mm/kasan/common.c:328 [inline] __kasan_slab_free+0xff/0x130 mm/kasan/common.c:374 kasan_slab_free include/linux/kasan.h:235 [inline] slab_free_hook mm/slub.c:1723 [inline] slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1749 slab_free mm/slub.c:3513 [inline] kmem_cache_free+0xbd/0x5d0 mm/slub.c:3530 dst_destroy+0x2d6/0x3f0 net/core/dst.c:127 rcu_do_batch kernel/rcu/tree.c:2506 [inline] rcu_core+0x7ab/0x1470 kernel/rcu/tree.c:2741 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 Last potentially related work creation: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 __kasan_record_aux_stack+0xf5/0x120 mm/kasan/generic.c:348 __call_rcu kernel/rcu/tree.c:2985 [inline] call_rcu+0xb1/0x740 kernel/rcu/tree.c:3065 dst_release net/core/dst.c:177 [inline] dst_release+0x79/0xe0 net/core/dst.c:167 tcp_v4_do_rcv+0x612/0x8d0 net/ipv4/tcp_ipv4.c:1712 sk_backlog_rcv include/net/sock.h:1030 [inline] __release_sock+0x134/0x3b0 net/core/sock.c:2768 release_sock+0x54/0x1b0 net/core/sock.c:3300 tcp_sendmsg+0x36/0x40 net/ipv4/tcp.c:1441 inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:819 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 sock_write_iter+0x289/0x3c0 net/socket.c:1057 call_write_iter include/linux/fs.h:2162 [inline] new_sync_write+0x429/0x660 fs/read_write.c:503 vfs_write+0x7cd/0xae0 fs/read_write.c:590 ksys_write+0x1ee/0x250 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff88807f1cb700 which belongs to the cache ip_dst_cache of size 176 The buggy address is located 58 bytes inside of 176-byte region [ffff88807f1cb700, ffff88807f1cb7b0) The buggy address belongs to the page: page:ffffea0001fc72c0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7f1cb flags: 0xfff00000000200(slab|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000000200 dead000000000100 dead000000000122 ffff8881413bb780 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0x112a20(GFP_ATOMIC|__GFP_NOWARN|__GFP_NORETRY|__GFP_HARDWALL), pid 5, ts 108466983062, free_ts 108048976062 prep_new_page mm/page_alloc.c:2418 [inline] get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4149 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5369 alloc_pages+0x1a7/0x300 mm/mempolicy.c:2191 alloc_slab_page mm/slub.c:1793 [inline] allocate_slab mm/slub.c:1930 [inline] new_slab+0x32d/0x4a0 mm/slub.c:1993 ___slab_alloc+0x918/0xfe0 mm/slub.c:3022 __slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3109 slab_alloc_node mm/slub.c:3200 [inline] slab_alloc mm/slub.c:3242 [inline] kmem_cache_alloc+0x35c/0x3a0 mm/slub.c:3247 dst_alloc+0x146/0x1f0 net/core/dst.c:92 rt_dst_alloc+0x73/0x430 net/ipv4/route.c:1613 __mkroute_output net/ipv4/route.c:2564 [inline] ip_route_output_key_hash_rcu+0x921/0x2d00 net/ipv4/route.c:2791 ip_route_output_key_hash+0x18b/0x300 net/ipv4/route.c:2619 __ip_route_output_key include/net/route.h:126 [inline] ip_route_output_flow+0x23/0x150 net/ipv4/route.c:2850 ip_route_output_key include/net/route.h:142 [inline] geneve_get_v4_rt+0x3a6/0x830 drivers/net/geneve.c:809 geneve_xmit_skb drivers/net/geneve.c:899 [inline] geneve_xmit+0xc4a/0x3540 drivers/net/geneve.c:1082 __netdev_start_xmit include/linux/netdevice.h:4994 [inline] netdev_start_xmit include/linux/netdevice.h:5008 [inline] xmit_one net/core/dev.c:3590 [inline] dev_hard_start_xmit+0x1eb/0x920 net/core/dev.c:3606 __dev_queue_xmit+0x299a/0x3650 net/core/dev.c:4229 page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1338 [inline] free_pcp_prepare+0x374/0x870 mm/page_alloc.c:1389 free_unref_page_prepare mm/page_alloc.c:3309 [inline] free_unref_page+0x19/0x690 mm/page_alloc.c:3388 qlink_free mm/kasan/quarantine.c:146 [inline] qlist_free_all+0x5a/0xc0 mm/kasan/quarantine.c:165 kasan_quarantine_reduce+0x180/0x200 mm/kasan/quarantine.c:272 __kasan_slab_alloc+0xa2/0xc0 mm/kasan/common.c:444 kasan_slab_alloc include/linux/kasan.h:259 [inline] slab_post_alloc_hook mm/slab.h:519 [inline] slab_alloc_node mm/slub.c:3234 [inline] kmem_cache_alloc_node+0x255/0x3f0 mm/slub.c:3270 __alloc_skb+0x215/0x340 net/core/skbuff.c:414 alloc_skb include/linux/skbuff.h:1126 [inline] alloc_skb_with_frags+0x93/0x620 net/core/skbuff.c:6078 sock_alloc_send_pskb+0x783/0x910 net/core/sock.c:2575 mld_newpack+0x1df/0x770 net/ipv6/mcast.c:1754 add_grhead+0x265/0x330 net/ipv6/mcast.c:1857 add_grec+0x1053/0x14e0 net/ipv6/mcast.c:1995 mld_send_initial_cr.part.0+0xf6/0x230 net/ipv6/mcast.c:2242 mld_send_initial_cr net/ipv6/mcast.c:1232 [inline] mld_dad_work+0x1d3/0x690 net/ipv6/mcast.c:2268 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445 Memory state around the buggy address: ffff88807f1cb600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88807f1cb680: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc >ffff88807f1cb700: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88807f1cb780: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc ffff88807f1cb800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 41063e9d ("ipv4: Early TCP socket demux.") Signed-off-by:
-
- 20 Dec, 2021 3 commits
-
-
Rémi Denis-Courmont authored
This ioctl() implicitly assumed that the socket was already bound to a valid local socket name, i.e. Phonet object. If the socket was not bound, two separate problems would occur: 1) We'd send an pipe enablement request with an invalid source object. 2) Later socket calls could BUG on the socket unexpectedly being connected yet not bound to a valid object. Reported-by: syzbot+2dc91e7fc3dea88b1e8a@syzkaller.appspotmail.com Signed-off-by:
Rémi Denis-Courmont <remi@remlab.net> Signed-off-by:
-
Sean Anderson authored
The DPNI object should get its own header, like the rest of the objects. Fixes: 60b91319 ("staging: fsl-mc: Convert documentation to rst format") Signed-off-by:
Sean Anderson <sean.anderson@seco.com> Signed-off-by:
-
Johannes Berg authored
We need to hold the local->mtx to release the channel context, as even encoded by the lockdep_assert_held() there. Fix it. Cc: stable@vger.kernel.org Fixes: 295b02c4 ("mac80211: Add FILS discovery support") Reported-and-tested-by: syzbot+11c342e5e30e9539cabd@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20211220090836.cee3d59a1915.I36bba9b79dc2ff4d57c3c7aa30dff9a003fe8c5c@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
- 18 Dec, 2021 13 commits
-
-
Jiasheng Jiang authored
The return value of kcalloc() needs to be checked. To avoid dereference of null pointer in case of the failure of alloc. Therefore, it might be better to change the return type of qlcnic_sriov_alloc_vlans() and return -ENOMEM when alloc fails and return 0 the others. Also, qlcnic_sriov_set_guest_vlan_mode() and __qlcnic_pci_sriov_enable() should deal with the return value of qlcnic_sriov_alloc_vlans(). Fixes: 154d0c81 ("qlcnic: VLAN enhancement for 84XX adapters") Signed-off-by:
-
Lin Ma authored
The existing cleanup routine implementation is not well synchronized with the syscall routine. When a device is detaching, below race could occur. static int ax25_sendmsg(...) { ... lock_sock() ax25 = sk_to_ax25(sk); if (ax25->ax25_dev == NULL) // CHECK ... ax25_queue_xmit(skb, ax25->ax25_dev->dev); // USE ... } static void ax25_kill_by_device(...) { ... if (s->ax25_dev == ax25_dev) { s->ax25_dev = NULL; ... } Other syscall functions like ax25_getsockopt, ax25_getname, ax25_info_show also suffer from similar races. To fix them, this patch introduce lock_sock() into ax25_kill_by_device in order to guarantee that the nullify action in cleanup routine cannot proceed when another socket request is pending. Signed-off-by:Hanjie Wu <nagi@zju.edu.cn> Signed-off-by:
Lin Ma <linma@zju.edu.cn> Signed-off-by:
-
Lin Ma authored
The previous commit 3e0588c2 ("hamradio: defer ax25 kfree after unregister_netdev") reorder the kfree operations and unregister_netdev operation to prevent UAF. This commit improves the previous one by also deferring the nullify of the ax->tty pointer. Otherwise, a NULL pointer dereference bug occurs. Partial of the stack trace is shown below. BUG: kernel NULL pointer dereference, address: 0000000000000538 RIP: 0010:ax_xmit+0x1f9/0x400 ... Call Trace: dev_hard_start_xmit+0xec/0x320 sch_direct_xmit+0xea/0x240 __qdisc_run+0x166/0x5c0 __dev_queue_xmit+0x2c7/0xaf0 ax25_std_establish_data_link+0x59/0x60 ax25_connect+0x3a0/0x500 ? security_socket_connect+0x2b/0x40 __sys_connect+0x96/0xc0 ? __hrtimer_init+0xc0/0xc0 ? common_nsleep+0x2e/0x50 ? switch_fpu_return+0x139/0x1a0 __x64_sys_connect+0x11/0x20 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The crash point is shown as below static void ax_encaps(...) { ... set_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags); // ax->tty = NULL! ... } By placing the nullify action after the unregister_netdev, the ax->tty pointer won't be assigned as NULL net_device framework layer is well synchronized. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-12-17 Maciej Fijalkowski says: It seems that previous [0] Rx fix was not enough and there are still issues with AF_XDP Rx ZC support in ice driver. Elza reported that for multiple XSK sockets configured on a single netdev, some of them were becoming dead after a while. We have spotted more things that needed to be addressed this time. More of information can be found in particular commit messages. It also carries Alexandr's patch that was sent previously which was overlapping with this set. [0]: https://lore.kernel.org/bpf/20211129231746.2767739-1-anthony.l.nguyen@intel.com/ ==================== Signed-off-by:
-
George Kennedy authored
Avoid double free in tun_free_netdev() by moving the dev->tstats and tun->security allocs to a new ndo_init routine (tun_net_init()) that will be called by register_netdevice(). ndo_init is paired with the desctructor (tun_free_netdev()), so if there's an error in register_netdevice() the destructor will handle the frees. BUG: KASAN: double-free or invalid-free in selinux_tun_dev_free_security+0x1a/0x20 security/selinux/hooks.c:5605 CPU: 0 PID: 25750 Comm: syz-executor416 Not tainted 5.16.0-rc2-syzk #1 Hardware name: Red Hat KVM, BIOS Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:247 kasan_report_invalid_free+0x55/0x80 mm/kasan/report.c:372 ____kasan_slab_free mm/kasan/common.c:346 [inline] __kasan_slab_free+0x107/0x120 mm/kasan/common.c:374 kasan_slab_free include/linux/kasan.h:235 [inline] slab_free_hook mm/slub.c:1723 [inline] slab_free_freelist_hook mm/slub.c:1749 [inline] slab_free mm/slub.c:3513 [inline] kfree+0xac/0x2d0 mm/slub.c:4561 selinux_tun_dev_free_security+0x1a/0x20 security/selinux/hooks.c:5605 security_tun_dev_free_security+0x4f/0x90 security/security.c:2342 tun_free_netdev+0xe6/0x150 drivers/net/tun.c:2215 netdev_run_todo+0x4df/0x840 net/core/dev.c:10627 rtnl_unlock+0x13/0x20 net/core/rtnetlink.c:112 __tun_chr_ioctl+0x80c/0x2870 drivers/net/tun.c:3302 tun_chr_ioctl+0x2f/0x40 drivers/net/tun.c:3311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Reported-by:
syzkaller <syzkaller@googlegroups.com> Signed-off-by:
George Kennedy <george.kennedy@oracle.com> Suggested-by:
-
Yevhen Orlov authored
In line: upper = info->upper_dev; We access upper_dev field, which is related only for particular events (e.g. event == NETDEV_CHANGEUPPER). So, this line cause invalid memory access for another events, when ptr is not netdev_notifier_changeupper_info. The KASAN logs are as follows: [ 30.123165] BUG: KASAN: stack-out-of-bounds in prestera_netdev_port_event.constprop.0+0x68/0x538 [prestera] [ 30.133336] Read of size 8 at addr ffff80000cf772b0 by task udevd/778 [ 30.139866] [ 30.141398] CPU: 0 PID: 778 Comm: udevd Not tainted 5.16.0-rc3 #6 [ 30.147588] Hardware name: DNI AmazonGo1 A7040 board (DT) [ 30.153056] Call trace: [ 30.155547] dump_backtrace+0x0/0x2c0 [ 30.159320] show_stack+0x18/0x30 [ 30.162729] dump_stack_lvl+0x68/0x84 [ 30.166491] print_address_description.constprop.0+0x74/0x2b8 [ 30.172346] kasan_report+0x1e8/0x250 [ 30.176102] __asan_load8+0x98/0xe0 [ 30.179682] prestera_netdev_port_event.constprop.0+0x68/0x538 [prestera] [ 30.186847] prestera_netdev_event_handler+0x1b4/0x1c0 [prestera] [ 30.193313] raw_notifier_call_chain+0x74/0xa0 [ 30.197860] call_netdevice_notifiers_info+0x68/0xc0 [ 30.202924] register_netdevice+0x3cc/0x760 [ 30.207190] register_netdev+0x24/0x50 [ 30.211015] prestera_device_register+0x8a0/0xba0 [prestera] Fixes: 3d5048cc ("net: marvell: prestera: move netdev topology validation to prestera_main") Signed-off-by:
Yevhen Orlov <yevhen.orlov@plvision.eu> Link: https://lore.kernel.org/r/20211216171714.11341-1-yevhen.orlov@plvision.euSigned-off-by:
-
Yevhen Orlov authored
In case, when some ports is in list and we don't find requested - we return last iterator state and not return NULL as expected. Fixes: 501ef306 ("net: marvell: prestera: Add driver for Prestera family ASIC devices") Signed-off-by:
-
Hoang Le authored
This reverts commit 86c3a3e9. The tipc_aead_init() function can be calling from an interrupt routine. This allocation might sleep with GFP_KERNEL flag, hence the following BUG is reported. [ 17.657509] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:230 [ 17.660916] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/3 [ 17.664093] preempt_count: 302, expected: 0 [ 17.665619] RCU nest depth: 2, expected: 0 [ 17.667163] Preemption disabled at: [ 17.667165] [<0000000000000000>] 0x0 [ 17.669753] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Tainted: G W 5.16.0-rc4+ #1 [ 17.673006] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 17.675540] Call Trace: [ 17.676285] <IRQ> [ 17.676913] dump_stack_lvl+0x34/0x44 [ 17.678033] __might_resched.cold+0xd6/0x10f [ 17.679311] kmem_cache_alloc_trace+0x14d/0x220 [ 17.680663] tipc_crypto_start+0x4a/0x2b0 [tipc] [ 17.682146] ? kmem_cache_alloc_trace+0xd3/0x220 [ 17.683545] tipc_node_create+0x2f0/0x790 [tipc] [ 17.684956] tipc_node_check_dest+0x72/0x680 [tipc] [ 17.686706] ? ___cache_free+0x31/0x350 [ 17.688008] ? skb_release_data+0x128/0x140 [ 17.689431] tipc_disc_rcv+0x479/0x510 [tipc] [ 17.690904] tipc_rcv+0x71c/0x730 [tipc] [ 17.692219] ? __netif_receive_skb_core+0xb7/0xf60 [ 17.693856] tipc_l2_rcv_msg+0x5e/0x90 [tipc] [ 17.695333] __netif_receive_skb_list_core+0x20b/0x260 [ 17.697072] netif_receive_skb_list_internal+0x1bf/0x2e0 [ 17.698870] ? dev_gro_receive+0x4c2/0x680 [ 17.700255] napi_complete_done+0x6f/0x180 [ 17.701657] virtnet_poll+0x29c/0x42e [virtio_net] [ 17.703262] __napi_poll+0x2c/0x170 [ 17.704429] net_rx_action+0x22f/0x280 [ 17.705706] __do_softirq+0xfd/0x30a [ 17.706921] common_interrupt+0xa4/0xc0 [ 17.708206] </IRQ> [ 17.708922] <TASK> [ 17.709651] asm_common_interrupt+0x1e/0x40 [ 17.711078] RIP: 0010:default_idle+0x18/0x20 Fixes: 86c3a3e9 ("tipc: use consistent GFP flags") Acked-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
Hoang Le <hoang.h.le@dektech.com.au> Link: https://lore.kernel.org/r/20211217030059.5947-1-hoang.h.le@dektech.com.auSigned-off-by:
-
Aleksander Jan Bajkowski authored
If the user sets a lower mtu on the CPU port than on the switch, then DMA inserts a few more bytes into the buffer than expected. In the worst case, it may exceed the size of the buffer. The experiments showed that the buffer should be a multiple of the burst length value. This patch rounds the length of the rx buffer upwards and fixes this bug. The reservation of FCS space in the buffer has been removed as PMAC strips the FCS. Fixes: 998ac358 ("net: lantiq: add support for jumbo frames") Reported-by:
Thomas Nixon <tom@tomn.co.uk> Signed-off-by:
Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by:
-
Jakub Kicinski authored
Paul Blakey says: ==================== net/sched: Fix ct zone matching for invalid conntrack state Currently, when a packet is marked as invalid conntrack_in in act_ct, post_ct will be set, and connection info (nf_conn) will be removed from the skb. Later openvswitch and flower matching will parse this as ct_state=+trk+inv. But because the connection info is missing, there is also no zone info to match against even though the packet is tracked. This series fixes that, by passing the last executed zone by act_ct. The zone info is passed along from act_ct to the ct flow dissector (used by flower to extract zone info) and to ovs, the same way as post_ct is passed, via qdisc layer skb cb to dissector, and via skb extension to OVS. Since adding any more data to qdisc skb cb, there will be no room for BPF skb cb to extend it and stay under skb->cb size, this series moves the tc related info from within qdisc skb cb to a tc specific cb that also extends it. ==================== Link: https://lore.kernel.org/r/20211214172435.24207-1-paulb@nvidia.comSigned-off-by:
-
Paul Blakey authored
Zone id is not restored if we passed ct and ct rejected the connection, as there is no ct info on the skb. Save the zone from tc skb cb to tc skb extension and pass it on to ovs, use that info to restore the zone id for invalid connections. Fixes: d29334c1 ("net/sched: act_api: fix miss set post_ct for ovs after do conntrack in act_ct") Signed-off-by:
Paul Blakey <paulb@nvidia.com> Signed-off-by:
-
Paul Blakey authored
If ct rejects a flow, it removes the conntrack info from the skb. act_ct sets the post_ct variable so the dissector will see this case as an +tracked +invalid state, but the zone id is lost with the conntrack info. To restore the zone id on such cases, set the last executed zone, via the tc control block, when passing ct, and read it back in the dissector if there is no ct info on the skb (invalid connection). Fixes: 7baf2429 ("net/sched: cls_flower add CT_FLAGS_INVALID flag support") Signed-off-by:
-
Paul Blakey authored
BPF layer extends the qdisc control block via struct bpf_skb_data_end and because of that there is no more room to add variables to the qdisc layer control block without going over the skb->cb size. Extend the qdisc control block with a tc control block, and move all tc related variables to there as a pre-step for extending the tc control block with additional members. Signed-off-by:
-
- 17 Dec, 2021 4 commits
-
-
Maciej Fijalkowski authored
Currently cleaned_count is initialized to ICE_DESC_UNUSED(rx_ring) and later on during the Rx processing it is incremented per each frame that driver consumed. This can result in excessive buffers requested from xsk pool based on that value. To address this, just drop cleaned_count and pass ICE_DESC_UNUSED(rx_ring) directly as a function argument to ice_alloc_rx_bufs_zc(). Idea is to ask for buffers as many as consumed. Let us also call ice_alloc_rx_bufs_zc unconditionally at the end of ice_clean_rx_irq_zc. This has been changed in that way for corresponding ice_clean_rx_irq, but not here. Fixes: 2d4238f5 ("ice: Add support for AF_XDP") Signed-off-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by:
Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by:
-
Maciej Fijalkowski authored
Commit ac6f733a ("ice: allow empty Rx descriptors") stated that ice HW can produce empty descriptors that are valid and they should be processed. Add this support to xsk ZC path to avoid potential processing problems. Fixes: 2d4238f5 ("ice: Add support for AF_XDP") Signed-off-by:
-
Maciej Fijalkowski authored
The descriptor that ntu is pointing at when we exit ice_alloc_rx_bufs_zc() should not have its corresponding DD bit cleared as descriptor is not allocated in there and it is not valid for HW usage. The allocation routine at the entry will fill the descriptor that ntu points to after it was set to ntu + nb_buffs on previous call. Even the spec says: "The tail pointer should be set to one descriptor beyond the last empty descriptor in host descriptor ring." Therefore, step away from clearing the status_error0 on ntu + nb_buffs descriptor. Fixes: db804cfc ("ice: Use the xsk batched rx allocation interface") Reported-by:
Elza Mathew <elza.mathew@intel.com> Signed-off-by:
-
Alexander Lobakin authored
The 'if (ntu == rx_ring->count)' block in ice_alloc_rx_buffers_zc() was previously residing in the loop, but after introducing the batched interface it is used only to wrap-around the NTU descriptor, thus no more need to assign 'xdp'. Fixes: db804cfc ("ice: Use the xsk batched rx allocation interface") Signed-off-by:
Alexander Lobakin <alexandr.lobakin@intel.com> Acked-by:
-
