- 25 Apr, 2019 31 commits
-
-
Larry Finger authored
In commit d825db346270e ("b43: shut up clang -Wuninitialized variable warning"), the message noted that function lpphy_papd_cal() was empty and had an old TODO regarding its implementation. As the reverse engineering project that created the LP-PHY version of this driver has not been active for some time, it is safe to remove this empty function. Signed-off-by:Larry Finger <Larry.Finger@lwfinger.net> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Dan Carpenter authored
The "rate_index" is only used as an index into the phist_data->rx_rate[] array in the mwifiex_hist_data_set() function. That array has MWIFIEX_MAX_AC_RX_RATES (74) elements and it's used to generate some debugfs information. The "rate_index" variable comes from the network skb->data[] and it is a u8 so it's in the 0-255 range. We need to cap it to prevent an array overflow. Fixes: cbf6e055 ("mwifiex: add rx histogram statistics support") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Gustavo A. R. Silva authored
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes, in particular in the context in which this code is being used. So, replace code of the following form: sizeof(struct usb_req_write_regs) + count * sizeof(struct reg_data) with: struct_size(req, reg_writes, count) This code was detected with the help of Coccinelle. Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = kzalloc(size, GFP_KERNEL) Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL) Notice that, in this case, variable regd_size is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: -
Siva Rebbagondla authored
Below changes are done: * Device 80MHz clock should be disabled for 9116 in 20MHz band. * Default edca parameters should be used initially before connection. * Default TA aggregation is 3 for 9116. * Bootup parameters should be loaded first when channel is changed. * 4 byte register writes are possible for 9116. Signed-off-by:
Siva Rebbagondla <siva8118@gmail.com> Signed-off-by:
-
Siva Rebbagondla authored
Device reset register(watchdog timer related) addresses and values are different for 9116. Signed-off-by:
-
Siva Rebbagondla authored
For 9116 device, we have introduced w9116 features frame, which shall be send when radio capabilities confirm is received. Signed-off-by:
-
Siva Rebbagondla authored
Bootup parameters are different for 9116 device. Check added for device model where-ever bootup parameters are being send. Signed-off-by:
-
Siva Rebbagondla authored
Initial frame exchange sequence has been changed for 9116 chip. Getting MAC address using EEPROM read frame will be once common device configuration is done and RESET_MAC frame is sending after bootup parameters confirmation is received, which are different from RS9113 device Signed-off-by:
-
Siva Rebbagondla authored
New firmware files and firmware loading method are added for 9116. Signed-off-by:
-
Siva Rebbagondla authored
Till software bootloader ready state, communication with device is common for 9113 and 9116. Hence moved that part of firmware loading to separate function rsi_prepare_fw_load(). Also LMAC_VER_OFFSET is different for 9113 and 9116, so renamed existing macro to LMAC_VER_OFFSET_9113 Signed-off-by:
-
Siva Rebbagondla authored
9116 device id entry is added in both SDIO and USB interfaces. New enumberation value taken for the device model. Based on the device model detected run time, few device specific operations needs to be performed. adding rsi_dev_model to get device type in run time, as we can use same driver for 9113 and 9116 except few firmware load changes. Signed-off-by:
-
Stanislaw Gruszka authored
Remove comment about fields that were removed. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Stanislaw Gruszka authored
Remove not used any longer queue_entry field and flag. Signed-off-by:
-
Stanislaw Gruszka authored
We do not any longer check txstatus timeout from tasklet, so do not need this optimization. Signed-off-by:
-
Stanislaw Gruszka authored
Sometimes we can get into situation when there are pending statuses, but we do not get INT_SOURCE_CSR_TX_FIFO_STATUS. Handle this situation by arming timeout timer and read statuses (it will fix case when we just do not have irq) and queue work to handle case we missed statues from hardware FIFO. Signed-off-by:
-
Stanislaw Gruszka authored
Prepare to use rt2800mmio_fetch_txstatus() in concurrent manner and drop return value since is not longer needed. Signed-off-by:
-
Stanislaw Gruszka authored
Move rt2800usb_txstatus_pending routine to rt2800lib. It will be reused by rt2800mmio code. Signed-off-by:
-
Stanislaw Gruszka authored
Use new flush_queue() callback for SoC devices, what was already done for PCIe devices. Signed-off-by:
-
Stanislaw Gruszka authored
Do not disable txstatus interrupt and add quota of processed tx statuses in one tasklet. Quota is needed to allow to fed device with new frames during processing of tx statuses. Patch fixes about 15% performance degradation on some scenarios caused by 0b0d556e ("rt2800mmio: use txdone/txstatus routines from lib"). Signed-off-by:
-
Aditya Pakki authored
kmalloc can fail in rsi_register_rates_channels but memcpy still attempts to write to channels. The patch replaces these calls with kmemdup and passes the error upstream. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
-
Tomislav Požega authored
Remove space leftovers. Signed-off-by:
Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by:
-
Stanislaw Gruszka authored
For unknown reasons printk() on some context can cause CPU hung on embedded MT7620 AP/router MIPS platforms. What can result on wifi disconnects. This patch move queue full messages to debug level what is consistent with other mac80211 drivers which drop packet silently if tx queue is full. This make MT7620 OpenWRT routers more stable, what was reported by various users. Signed-off-by:
-
Stanislaw Gruszka authored
Some USB host devices/drivers on some conditions can always return EPROTO error on submitted URBs. That can cause infinity loop in the rt2x00 driver. Since we can have single EPROTO errors we can not mark as device as removed to avoid infinity loop. However we can count consecutive EPROTO errors and mark device as removed if get lot of it. I choose number 10 as threshold. Reported-and-tested-by:
Randy Oostdyk <linux-kernel@oostdyk.com> Signed-off-by:
-
Stanislaw Gruszka authored
As reported by Randy we can overwhelm logs on some USB error conditions. To avoid that use dev_warn_ratelimited() and dev_err_ratelimitd(). Reported-and-tested-by:
-
Kangjie Lu authored
In case create_singlethread_workqueue fails, the fix free the hardware and returns NULL to avoid NULL pointer dereference. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
-
YueHaibing authored
Syzkaller report this: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 0 PID: 4492 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:sysfs_remove_file_ns+0x27/0x70 fs/sysfs/file.c:468 Code: 00 00 00 41 54 55 48 89 fd 53 49 89 d4 48 89 f3 e8 ee 76 9c ff 48 8d 7d 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 75 2d 48 89 da 48 b8 00 00 00 00 00 fc ff df 48 8b 6d RSP: 0018:ffff8881e9d9fc00 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: ffffffff900367e0 RCX: ffffffff81a95952 RDX: 0000000000000006 RSI: ffffc90001405000 RDI: 0000000000000030 RBP: 0000000000000000 R08: fffffbfff1fa22ed R09: fffffbfff1fa22ed R10: 0000000000000001 R11: fffffbfff1fa22ec R12: 0000000000000000 R13: ffffffffc1abdac0 R14: 1ffff1103d3b3f8b R15: 0000000000000000 FS: 00007fe409dc1700(0000) GS:ffff8881f1200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2d721000 CR3: 00000001e98b6005 CR4: 00000000007606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: sysfs_remove_file include/linux/sysfs.h:519 [inline] driver_remove_file+0x40/0x50 drivers/base/driver.c:122 pcmcia_remove_newid_file drivers/pcmcia/ds.c:163 [inline] pcmcia_unregister_driver+0x7d/0x2b0 drivers/pcmcia/ds.c:209 ssb_modexit+0xa/0x1b [ssb] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe409dc0c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200000c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe409dc16bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Modules linked in: ssb(-) 3c59x nvme_core macvlan tap pata_hpt3x3 rt2x00pci null_blk tsc40 pm_notifier_error_inject notifier_error_inject mdio cdc_wdm nf_reject_ipv4 ath9k_common ath9k_hw ath pppox ppp_generic slhc ehci_platform wl12xx wlcore tps6507x_ts ioc4 nf_synproxy_core ide_gd_mod ax25 can_dev iwlwifi can_raw atm tm2_touchkey can_gw can sundance adp5588_keys rt2800mmio rt2800lib rt2x00mmio rt2x00lib eeprom_93cx6 pn533 lru_cache elants_i2c ip_set nfnetlink gameport tipc hampshire nhc_ipv6 nhc_hop nhc_udp nhc_fragment nhc_routing nhc_mobility nhc_dest 6lowpan silead brcmutil nfc mt76_usb mt76 mac80211 iptable_security iptable_raw iptable_mangle iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_gre sit hsr veth vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon vcan bridge stp llc ip6_gre ip6_tunnel tunnel6 tun joydev mousedev serio_raw ide_pci_generic piix floppy ide_core sch_fq_codel ip_tables x_tables ipv6 [last unloaded: 3c59x] Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 3913cbf8011e1c05 ]--- In ssb_modinit, it does not fail SSB init when ssb_host_pcmcia_init failed, however in ssb_modexit, ssb_host_pcmcia_exit calls pcmcia_unregister_driver unconditionally, which may tigger a NULL pointer dereference issue as above. Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: 399500da ("ssb: pick PCMCIA host code support from b43 driver") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
YueHaibing authored
Use remove_proc_subtree to remove the whole subtree Signed-off-by:
-
YueHaibing authored
init_ray_cs does not check value of pcmcia_register_driver, if it fails, there maybe cause a NULL pointer dereference in exit_ray_cs. Signed-off-by:
-
Gustavo A. R. Silva authored
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes, in particular in the context in which this code is being used. So, replace code of the following form: sizeof(*pmkids) + max_pmkids * sizeof(pmkids->bssid_info[0]) with: struct_size(pmkids, bssid_info, num_pmkids) This code was detected with the help of Coccinelle. Signed-off-by:
-
Kalle Valo authored
Merge tag 'iwlwifi-next-for-kalle-2019-04-18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Third batch of patches intended for v5.2 * Bump the 20000-series FW API version supported; * Work on the new debugging infra continues; * One clean-up to prevent a bogus warning with clang; * A small cleanup in the PCI ID list; * Work on new hardware continues; * RTT confidence indication support for FTM; * An improvement in HE rate-scaling;
-
- 19 Apr, 2019 9 commits
-
-
Shahar S Matityahu authored
In case the the trigger occurrences is zero or force_restart is set, the driver sets IWL_FWRT_STATUS_DUMPING without actually scheduling trigger collection. At this point no other dump collection can be performed. Solve this by setting IWL_FWRT_STATUS_DUMPING bit only when the driver is surely going to schedule dump collection Signed-off-by:
Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Nathan Chancellor authored
When building with -Wsometimes-uninitialized, Clang warns: drivers/net/wireless/intel/iwlwifi/mvm/sta.c:2114:12: warning: variable 'queue' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] Clang can't evaluate at this point that WARN(1, ...) always returns true because __ret_warn_on is defined as !!(condition), which isn't immediately evaluated as 1. Change this branch to else so that it's clear to Clang that we intend to bail out here. Link: https://github.com/ClangBuiltLinux/linux/issues/399Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> [added a few more braces] Signed-off-by:
-
Luca Coelho authored
This device ID and device type was never released, so we can remove it from the PCI IDs list. Signed-off-by: -
Avraham Stern authored
The range response notification API has changed to add a value that indicates the confidence of the rtt result. Support the new API and print the rtt confidence for debug. Signed-off-by:
Avraham Stern <avraham.stern@intel.com> Signed-off-by:
-
Shahar S Matityahu authored
Signed-off-by:
-
Shahar S Matityahu authored
Allows to dump periphery memory on ax210 devices. Signed-off-by:
-
Gregory Greenman authored
When building TLC configuration command, consider in case of HE, if LDPC support is turned on in our capabilities. Signed-off-by:
Gregory Greenman <gregory.greenman@intel.com> Signed-off-by:
-
Shahar S Matityahu authored
Add debug prints to the ini flow and rewrite existing prints to provide more information Signed-off-by:
-
Shahar S Matityahu authored
Add FW_INFO debug level. This level is enabled if INFO or FW debug levels are set. Also, set fw request and callback prints under this debug level. Signed-off-by:
-
