Add a helper to move the duplicate code for error message
from nvme_fc_rcv_ls_req() to nvme_fc_rcv_ls_req_err_msg().
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Before using dynamically allcoated variable lsop in the
nvme_fc_rcv_ls_req(), add a check for NULL and error out early.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Add unprivileged passthrough of the I/O Command Set Independent and I/O
Command Set Specific Identify Controller sub-command.

This will allow access to attributes (e.g. MDTS and WZSL) that are needed
to effectively form passthrough I/O to the /dev/ng* character devices.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Our mpath stack device is just a shim that selects a bottom namespace
and submits the bio to it without any fancy splitting. This also means
that we don't clone the bio or have any context to the bio beyond
submission. However it really sucks that we don't see the mpath device
io stats.

Given that the mpath device can't do that without adding some context
to it, we let the bottom device do it on its behalf (somewhat similar
to the approach taken in nvme_trace_bio_complete).

When the IO starts, we account the request for multipath IO stats using
REQ_NVME_MPATH_IO_STATS nvme_request flag to avoid queue io stats disable
in the middle of the request.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>

In preparation for nvme-multipath IO stats accounting, we want the
accounting to happen in a centralized place. The request completion
is already centralized, but we need a common helper to request I/O
start.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>

strtobool() is the same as kstrtobool().
However, the latter is more used within the kernel.

In order to remove strtobool() and slightly simplify kstrtox.h, switch to
the other function name.

While at it, include the corresponding header file (<linux/kstrtox.h>)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The NVMe drivers support a mode where no tagset is allocated for the I/O
queues and only the admin queue is usable.  In that case ctrl->tagset is
NULL and we must not call the block per-tagset quiesce helpers that
dereference it.

Fixes: 98d81f0d ("nvme: use blk_mq_[un]quiesce_tagset")
Reported-by: Gerd Bayer <gbayer@linux.ibm.com>
Reported-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chao Leng <lengchao@huawei.com>

There is no need to update tg->slice_start[rw] to start when they are
equal already. So remove "eq" part of check before update slice_start.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Link: https://lore.kernel.org/r/20221205115709.251489-10-shikemeng@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

There is no need to check elapsed time from last upgrade for each node in
hierarchy. Move this check before traversing as throtl_can_upgrade do
to remove repeat check.
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Link: https://lore.kernel.org/r/20221205115709.251489-9-shikemeng@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Function tg_last_low_overflow_time is called with intermediate node as
following:
throtl_hierarchy_can_downgrade
  throtl_tg_can_downgrade
    tg_last_low_overflow_time

throtl_hierarchy_can_upgrade
  throtl_tg_can_upgrade
    tg_last_low_overflow_time

throtl_hierarchy_can_downgrade/throtl_hierarchy_can_upgrade will traverse
from leaf node to sub-root node and pass traversed intermediate node
to tg_last_low_overflow_time.

No such limit could be found from context and implementation of
tg_last_low_overflow_time, so remove this limit in comment.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Link: https://lore.kernel.org/r/20221205115709.251489-8-shikemeng@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

lapsed time -> elapsed time
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Link: https://lore.kernel.org/r/20221205115709.251489-7-shikemeng@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Commit c79892c5 ("blk-throttle: add upgrade logic for LIMIT_LOW
state") added upgrade logic for low limit and methioned that
1. "To determine if a cgroup exceeds its limitation, we check if the cgroup
has pending request. Since cgroup is throttled according to the limit,
pending request means the cgroup reaches the limit."
2. "If a cgroup has limit set for both read and write, we consider the
combination of them for upgrade. The reason is read IO and write IO can
interfere with each other. If we do the upgrade based in one direction IO,
the other direction IO could be severly harmed."
Besides, we also determine that cgroup reaches low limit if low limit is 0,
see comment in throtl_tg_can_upgrade.

Collect the information above, the desgin of upgrade check is as following:
1.The low limit is reached if limit is zero or io is already queued.
2.Cgroup will pass upgrade check if low limits of READ and WRITE are both
reached.

Simpfy the check code described above to removce repeat check and improve
readability. There is no functional change.

Detail equivalence proof is as following:
All replaced conditions to return true are as following:
condition 1
  (!read_limit && !write_limit)
condition 2
  read_limit && sq->nr_queued[READ] &&
  (!write_limit || sq->nr_queued[WRITE])
condition 3
  write_limit && sq->nr_queued[WRITE] &&
  (!read_limit || sq->nr_queued[READ])

Transferring condition 2 as following:
  (read_limit && sq->nr_queued[READ]) &&
  (!write_limit || sq->nr_queued[WRITE])
is equivalent to
  (read_limit && sq->nr_queued[READ]) &&
  (!write_limit || (write_limit && sq->nr_queued[WRITE]))
is equivalent to
condition 2.1
  (read_limit && sq->nr_queued[READ] &&
  !write_limit) ||
condition 2.2
  (read_limit && sq->nr_queued[READ] &&
  (write_limit && sq->nr_queued[WRITE]))

Transferring condition 3 as following:
  write_limit && sq->nr_queued[WRITE] &&
  (!read_limit || sq->nr_queued[READ])
is equivalent to
  (write_limit && sq->nr_queued[WRITE]) &&
  (!read_limit || (read_limit && sq->nr_queued[READ]))
is equivalent to
condition 3.1
  ((write_limit && sq->nr_queued[WRITE]) &&
  !read_limit) ||
condition 3.2
  ((write_limit && sq->nr_queued[WRITE]) &&
  (read_limit && sq->nr_queued[READ]))

Condition 3.2 is the same as condition 2.2, so all conditions we get to
return are as following:
  (!read_limit && !write_limit) (1)
  (!read_limit && (write_limit && sq->nr_queued[WRITE])) (3.1)
  ((read_limit && sq->nr_queued[READ]) && !write_limit) (2.1)
  ((write_limit && sq->nr_queued[WRITE]) &&
  (read_limit && sq->nr_queued[READ])) (2.2)

As we can extract conditions "(a1 || a2) && (b1 || b2)" to:
a1 && b1
a1 && b2
a2 && b1
ab && b2

Considering that:
a1 = !read_limit
a2 = read_limit && sq->nr_queued[READ]
b1 = !write_limit
b2 = write_limit && sq->nr_queued[WRITE]

We can pack replaced conditions to
  (!read_limit || (read_limit && sq->nr_queued[READ])) &&
  (!write_limit || (write_limit && sq->nr_queued[WRITE]))
which is equivalent to
  (!read_limit || sq->nr_queued[READ]) &&
  (!write_limit || sq->nr_queued[WRITE])
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Link: https://lore.kernel.org/r/20221205115709.251489-6-shikemeng@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

In C language, When executing "if (expression1 && expression2)" and
expression1 return false, the expression2 may not be executed.
For "tg_within_bps_limit(tg, bio, bps_limit, &bps_wait) &&
tg_within_iops_limit(tg, bio, iops_limit, &iops_wait))", if bps is
limited, tg_within_bps_limit will return false and
tg_within_iops_limit will not be called. So even bps and iops are
both limited, iops_wait will not be calculated and is always zero.
So wait time of iops is always ignored.

Fix this by always calling tg_within_bps_limit and tg_within_iops_limit
to get wait time for both bps and iops.

Observed that:
1. Wait time in tg_within_iops_limit/tg_within_bps_limit need always
be stored as wait argument is always passed.
2. wait time is stored to zero if iops/bps is limited otherwise non-zero
is stored.
Simpfy tg_within_iops_limit/tg_within_bps_limit by removing wait argument
and return wait time directly. Caller tg_may_dispatch checks if wait time
is zero to find if iops/bps is limited.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Link: https://lore.kernel.org/r/20221205115709.251489-5-shikemeng@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Ignore cgroup without io queued in blk_throtl_cancel_bios for two
reasons:
1. Save cpu cycle for trying to dispatch cgroup which is no io queued.
2. Avoid non-consistent state that cgroup is inserted to service queue
without THROTL_TG_PENDING set as tg_update_disptime will unconditional
re-insert cgroup to service queue. If we are on the default hierarchy,
IO dispatched from child in tg_dispatch_one_bio will trigger inserting
cgroup to service queue without erase first and ruin the tree.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Link: https://lore.kernel.org/r/20221205115709.251489-4-shikemeng@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Consider situation as following (on the default hierarchy):
 HDD
  |
root (bps limit: 4k)
  |
child (bps limit :8k)
  |
fio bs=8k
Rate of fio is supposed to be 4k, but result is 8k. Reason is as
following:
Size of single IO from fio is larger than bytes allowed in one
throtl_slice in child, so IOs are always queued in child group first.
When queued IOs in child are dispatched to parent group, BIO_BPS_THROTTLED
is set and these IOs will not be limited by tg_within_bps_limit anymore.
Fix this by only set BIO_BPS_THROTTLED when the bio traversed the entire
tree.

There patch has no influence on situation which is not on the default
hierarchy as each group is a single root group without parent.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Link: https://lore.kernel.org/r/20221205115709.251489-3-shikemeng@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

On the default hierarchy (cgroup2), the throttle interface files don't
exist in the root cgroup, so the ablity to limit the whole system
by configuring root group is not existing anymore. In general, cgroup
doesn't wanna be in the business of restricting resources at the
system level, so correct the stale comment that we can limit whole
system to we can only limit subtree.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Link: https://lore.kernel.org/r/20221205115709.251489-2-shikemeng@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull floppy fix from Denis:

"Floppy patch for 6.2

 The patch from Yuan Can fixes a memory leak in floppy init code.

 Signed-off-by: Denis Efremov <efremov@linux.com>"

* tag 'floppy-for-6.2' of https://github.com/evdenis/linux-floppy:
  floppy: Fix memory leak in do_floppy_init()

A memory leak was reported when floppy_alloc_disk() failed in
do_floppy_init().

unreferenced object 0xffff888115ed25a0 (size 8):
  comm "modprobe", pid 727, jiffies 4295051278 (age 25.529s)
  hex dump (first 8 bytes):
    00 ac 67 5b 81 88 ff ff                          ..g[....
  backtrace:
    [<000000007f457abb>] __kmalloc_node+0x4c/0xc0
    [<00000000a87bfa9e>] blk_mq_realloc_tag_set_tags.part.0+0x6f/0x180
    [<000000006f02e8b1>] blk_mq_alloc_tag_set+0x573/0x1130
    [<0000000066007fd7>] 0xffffffffc06b8b08
    [<0000000081f5ac40>] do_one_initcall+0xd0/0x4f0
    [<00000000e26d04ee>] do_init_module+0x1a4/0x680
    [<000000001bb22407>] load_module+0x6249/0x7110
    [<00000000ad31ac4d>] __do_sys_finit_module+0x140/0x200
    [<000000007bddca46>] do_syscall_64+0x35/0x80
    [<00000000b5afec39>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
unreferenced object 0xffff88810fc30540 (size 32):
  comm "modprobe", pid 727, jiffies 4295051278 (age 25.529s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000007f457abb>] __kmalloc_node+0x4c/0xc0
    [<000000006b91eab4>] blk_mq_alloc_tag_set+0x393/0x1130
    [<0000000066007fd7>] 0xffffffffc06b8b08
    [<0000000081f5ac40>] do_one_initcall+0xd0/0x4f0
    [<00000000e26d04ee>] do_init_module+0x1a4/0x680
    [<000000001bb22407>] load_module+0x6249/0x7110
    [<00000000ad31ac4d>] __do_sys_finit_module+0x140/0x200
    [<000000007bddca46>] do_syscall_64+0x35/0x80
    [<00000000b5afec39>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

If the floppy_alloc_disk() failed, disks of current drive will not be set,
thus the lastest allocated set->tag cannot be freed in the error handling
path. A simple call graph shown as below:

 floppy_module_init()
   floppy_init()
     do_floppy_init()
       for (drive = 0; drive < N_DRIVE; drive++)
         blk_mq_alloc_tag_set()
           blk_mq_alloc_tag_set_tags()
             blk_mq_realloc_tag_set_tags() # set->tag allocated
         floppy_alloc_disk()
           blk_mq_alloc_disk() # error occurred, disks failed to allocated

       ->out_put_disk:
       for (drive = 0; drive < N_DRIVE; drive++)
         if (!disks[drive][0]) # the last disks is not set and loop break
           break;
         blk_mq_free_tag_set() # the latest allocated set->tag leaked

Fix this problem by free the set->tag of current drive before jump to
error handling path.

Cc: stable@vger.kernel.org
Fixes: 302cfee1 ("floppy: use a separate gendisk for each media format")
Signed-off-by: Yuan Can <yuancan@huawei.com>
[efremov: added stable list, changed title]
Signed-off-by: Denis Efremov <efremov@linux.com>

With the removal of the pktcdvd driver, there are no in-kernel users of
the devnode callback in struct block_device_operations, so it can be
safely removed.  If it is needed for new block drivers in the future, it
can be brought back.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20221203140747.1942969-1-gregkh@linuxfoundation.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

Merge branch 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.2/block

Pull MD fixes from Song:

"This contains code cleanup by Christoph."

* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  md: fold unbind_rdev_from_array into md_kick_rdev_from_array
  md: mark md_kick_rdev_from_array static
  md: remove lock_bdev / unlock_bdev

Way back in 2016 in commit 5a8b187c ("pktcdvd: mark as unmaintained
and deprecated") this driver was marked as "will be removed soon".  5
years seems long enough to have it stick around after that, so finally
remove the thing now.
Reported-by: Christoph Hellwig <hch@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Thomas Maier <balagi@justmail.de>
Cc: Peter Osterlund <petero2@telia.com>
Cc: linux-block@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20221202182758.1339039-1-gregkh@linuxfoundation.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

unbind_rdev_from_array is only called from md_kick_rdev_from_array, so
merge it into its only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>

md_kick_rdev_from_array is only used in md.c, so unexport it and mark
the symbol static.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>

These wrappers for blkdev_get / blkdev_put just horribly confuse the
code with their odd naming.  Remove them and improve the error unwinding
in md_import_device with the now folded code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>

Make the description of @gendisk to @disk in blkcg_schedule_throttle()
to clear the below warnings:

block/blk-cgroup.c:1850: warning: Function parameter or member 'disk' not described in 'blkcg_schedule_throttle'
block/blk-cgroup.c:1850: warning: Excess function parameter 'gendisk' description in 'blkcg_schedule_throttle'

Fixes: de185b56 ("blk-cgroup: pass a gendisk to blkcg_schedule_throttle")
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3338Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221202011713.14834-1-yang.lee@linux.alibaba.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

In zoned mode, zones with write pointers can have conditions "read-only"
or "offline". In read-only condition, zones can not be written. In
offline condition, the zones can be neither written nor read. These
conditions are intended for zones with media failures, then it is
difficult to set those conditions to zones on real devices.

To test handling of zones in the conditions, add a feature to null_blk
to set up zones in read-only or offline condition. Add new configuration
attributes "zone_readonly" and "zone_offline". Write a sector to the
attribute files to specify the target zone to set the zone conditions.
For example, following command lines do it:

   echo 0 > nullb1/zone_readonly
   echo 524288 > nullb1/zone_offline

When the specified zones are already in read-only or offline condition,
normal empty condition is restored to the zones. These condition changes
can be done only after the null_blk device get powered, since status
area of each zone is not yet allocated before power-on.

Also improve zone condition checks to inhibit all commands for zones in
offline conditions. In same manner, inhibit write and zone management
commands for zones in read-only condition.
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20221201061036.2342206-1-shinichiro.kawasaki@wdc.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Originally-from: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221201110349.1282687-6-christoph.boehmwalder@linbit.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Use call site specific ratelimit instead of one single static global.
Also ratelimit ASSERTION messages generated by expect().

Originally-from: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221201110349.1282687-5-christoph.boehmwalder@linbit.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Incorporate as many out-of-tree changes as possible without changing the
genl API.

Over the years, we restructured this several times, and also changed the
log format.

One breaking change is that DRBD 9 gained "implicit options", like a
connection name. This cannot be replayed here without changing the API,
so save it for later.

Originally-from: Andreas Gruenbacher <agruen@linbit.com>
Originally-from: Philipp Reisner <philipp.reisner@linbit.com>
Originally-from: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221201110349.1282687-4-christoph.boehmwalder@linbit.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221201110349.1282687-3-christoph.boehmwalder@linbit.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Unify how failed assertions from D_ASSERT() and expect() are logged.

Originally-from: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221201110349.1282687-2-christoph.boehmwalder@linbit.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Use only one hyphen in kernel-doc notation between the function name
and its short description.

The is the documented kerenl-doc format. It also fixes the HTML
presentation to be consistent with other functions.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Link: https://lore.kernel.org/r/20221201070331.25685-1-rdunlap@infradead.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

There is no iocg_pd_init function. The pd_alloc_fn function pointer of
iocost policy is set with ioc_pd_init. Just correct it.
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221018121932.10792-6-shikemeng@huawei.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

If we trace vtime_base_rate instead of vtime_rate, there is nowhere
which accesses now->vrate except function ioc_now using now->vrate locally.
Just remove it.
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221018121932.10792-5-shikemeng@huawei.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Since commit ac33e91e ("blk-iocost: implement vtime loss
compensation") rename original vtime_rate to vtime_base_rate
and current vtime_rate is original vtime_rate with compensation.
The current rate showed in tracepoint is mixed with vtime_rate
and vtime_base_rate:
1) In function ioc_adjust_base_vrate, the first trace_iocost_ioc_vrate_adj
shows vtime_rate, the second trace_iocost_ioc_vrate_adj shows
vtime_base_rate.
2) In function iocg_activate shows vtime_rate by calling
TRACE_IOCG_PATH(iocg_activate...
3) In function ioc_check_iocgs shows vtime_rate by calling
TRACE_IOCG_PATH(iocg_idle...

Trace vtime_base_rate instead of vtime_rate as:
1) Before commit ac33e91e ("blk-iocost: implement vtime loss
compensation"), the traced rate is without compensation, so still
show rate without compensation.
2) The vtime_base_rate is more stable while vtime_rate heavily depends on
excess budeget on current period which may change abruptly in next period.
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221018121932.10792-4-shikemeng@huawei.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Since commit ac33e91e("blk-iocost: implement vtime loss compensation")
split vtime_rate into vtime_rate and vtime_base_rate, we need reset both
vtime_base_rate and vtime_rate when device parameters are refreshed.
If vtime_base_rate is no reset here, vtime_rate will be overwritten with
old vtime_base_rate soon in ioc_refresh_vrate.
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221018121932.10792-3-shikemeng@huawei.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

soley -> solely
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221018121932.10792-2-shikemeng@huawei.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Since commit 10c70d95 ("block: remove the bd_openers checks in
blk_drop_partitions") we allow rereading of partition table although
there are users of the block device. This has an undesirable consequence
that e.g. if sda and sdb are assembled to a RAID1 device md0 with
partitions, BLKRRPART ioctl on sda will rescan partition table and
create sda1 device. This partition device under a raid device confuses
some programs (such as libstorage-ng used for initial partitioning for
distribution installation) leading to failures.

Fix the problem refusing to rescan partitions if there is another user
that has the block device exclusively open.

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20221130135344.2ul4cyfstfs3znxg@quack3
Fixes: 10c70d95 ("block: remove the bd_openers checks in blk_drop_partitions")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221130175653.24299-1-jack@suse.cz
[axboe: fold in followup fix]
Signed-off-by: Jens Axboe <axboe@kernel.dk>

ida_simple[get|remove] are deprecated, and are just wrappers to
ida_[alloc_range|free]. Replace ida_simple[get|remove] with their
corresponding counterparts.

No functional changes.
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20221130123001.25473-1-p.raghav@samsung.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

We can't just say that the last reference release may block, as any
reference dropped could be the last one.  So move the might_sleep() from
blk_free_queue to blk_put_queue and update the documentation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221114042637.1009333-6-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>