- 24 Feb, 2014 23 commits
-
-
Laurent Pinchart authored
The sensor needs two power supplies, VAA and VDD. Require a regulator for each of them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
The camera sensor will soon require regulators and clocks. Register fixed regulators for its VAA and VDD power supplies and a fixed rate clock for its master clock. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
A failure to locate the external subdev for a non memory-to-memory pipeline is a fatal error, don't ignore it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Tested-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
Memory-to-memory pipelines have no external subdev, we shouldn't try to locate one and validate its configuration. The driver currently works by chance due to another bug that results in failure to locate the external subdev being ignored. This gets rid of the "omap3isp omap3isp: can't find source, failing now" error message in the kernel log when operating on a memory-to-memory pipeline. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Tested-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Florian Vaussard authored
Commit 3fdfedaa "[media] omap3isp: preview: Lower the crop margins" accidentally changed the previewer's cropping, causing the previewer to miss four pixels on each line, thus corrupting the final image. Restored the removed setting. Cc: stable@vger.kernel.org Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Hans Verkuil authored
Drop the vid_limit module option: there is really no need to limit this. No other driver does that. If you try to allocate more buffers then vb2 will automatically reduce the number of buffers anyway. Also add sanity checks if the size in the fmt argument is going to be used and drop the code that checks against *nbuffers == 0: this can never happen (the vb2 framework ensures that) and the code was wrong anyway since *nbuffers should have been set to the minimum number of required buffers which is 1 for this driver. Since vivi is often used as a template driver it is good to have this driver be as compliant as possible. This broken code was for example copied to the s2255 driver (which is being fixed as well). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Hans Verkuil authored
The sequence counting was not reset to 0 between each streaming run, and it was increased only every other frame. This is incorrect behavior: the confusion is with FIELD_ALTERNATE systems where each field is transmitted separately and only when both fields have been received is the frame sequence number increased. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Hans Verkuil authored
Add support for 32-bit ioctls with v4l-subdev device nodes. Rather than keep adding new ioctls to the list in v4l2-compat-ioctl32.c, just check if the ioctl is a non-private V4L2 ioctl and if so, call the conversion code. We keep forgetting to add new ioctls, so this is a more robust solution. In addition extend the subdev API with support for a compat32 function to convert custom v4l-subdev ioctls. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Hans Verkuil authored
The start_seq[] should be const. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Malcolm Priestley authored
Remove it9137 firmware files it9137.txt and it9137 get_dvb_firmware. dvb-usb-it9137-01.fw firmware is no longer in use. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Malcolm Priestley authored
This driver was removed, and supported devices got moved to anoher driver. So, cleanup MAINTAINERS as well. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Malcolm Priestley authored
This driver has been replaced by af9033 and tuner_it913x Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Malcolm Priestley authored
Following moving ids to af9035. This driver is no longer in use. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Palosaari authored
Some device vendors has forgotten set correct slave demod I2C address to eeprom. Use default I2C address when eeprom has no address at all. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Malcolm Priestley authored
As follow on to patch af9035: Move it913x single devices to af9035 and patch 1. SNR is reported as db/10 values. All dual ids are added to af9035 and it913x driver disabled. it913x/it913x-fe removal patches to follow. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Malcolm Priestley authored
On some devices the vendor has not set EEPROM_2ND_DEMOD_ADDR. Checks tmp is not zero after call to get EEPROM_2ND_DEMOD_ADDR and sets the default slave address of 0x3a on 0x9135 devices. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Malcolm Priestley authored
The generic v1 and v2 devices have been all tested. IDs tested USB_PID_ITETECH_IT9135 v1 & v2 USB_PID_ITETECH_IT9135_9005 v1 USB_PID_ITETECH_IT9135_9006 v2 Current Issues There is no signal on USB_PID_ITETECH_IT9135 v2 No SNR reported all devices. All single devices tune and scan fine. All remotes tested okay. Dual device failed to register second adapter USB_PID_KWORLD_UB499_2T_T09 It is not clear what the problem is at the moment. So only single IDs are transferred in this patch. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Palosaari authored
Fix some coding style issues, mostly reported by checkpatch.pl. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Palosaari authored
Tuner PLL lock flag was mapped to FE_HAS_SIGNAL, which is wrong. PLL lock has nothing to do with received signal. In real life that flag is always set. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Dan Carpenter authored
"ret" is an error code here, we already tested that. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Antti Palosaari <crope@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Till Dörges authored
I've got the following DAB USB stick that also works fine with the DVB_USB_RTL28XXU driver after I added its USB ID: Bus 001 Device 009: ID 0ccd:00b4 TerraTec Electronic GmbH [crope@iki.fi: apply patch partly manually] Signed-off-by: Till Dörges <till@doerges.net> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Palosaari authored
Add missing m88ts2022 module reference counts as removing that module is not allowed when it is used by em28xx-dvb module. That same module was not unregistered correctly, fix it too. Error cases validated by returning errors from m88ds3103, m88ts2022 and a8293 probe(). Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
- 07 Feb, 2014 1 commit
-
-
Mauro Carvalho Chehab authored
There are several left overs with my old email address. Remove their occurrences and add myself at CREDITS, to allow people to be able to reach me on my new addresses. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
- 06 Feb, 2014 5 commits
-
-
Mauro Carvalho Chehab authored
Adds a missing section to describe the remote controller interface. The DocBook is just addin the same documentation as written at Documentation/ABI/testing/sysfs-class-rc, using the DocBook's way, and dropping timestamps/contact info. While that means that we'll have the same info on two parts, there are parts of the remote controller interface that doesn't belong at Documentation/ABI/, and it makes sense to have everything on the same place. This also means that we'll need to manually track to be sure that both places will be synchronized, but, as it is not expected much changes on it, this sync can be done manually. It also adds an introduction that states that the IR is a normal evdev/input interface, plus the sysfs class nodes. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Mauro Carvalho Chehab authored
All chapters/parts but Remote controllers have the revision tags inside the body. Move those to remote_controllers.xml and do some cleanup. No functional changes. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
James Hogan authored
Change 32bit NEC scancode format (used by Apple and TiVo remotes) to encode the data with the correct bit order. Previously the raw bits were used without being bit reversed, now each 16bit half is bit reversed compared to before. So for the raw NEC data: (LSB/First) 0xAAaaCCcc (MSB/Last) (where traditionally AA=address, aa=~address, CC=command, cc=~command) We now generate the scancodes: (MSB) 0x0000AACC (LSB) (normal NEC) (MSB) 0x00AAaaCC (LSB) (extended NEC, address check wrong) (MSB) 0xaaAAccCC (LSB) (32-bit NEC, command check wrong) Note that the address byte order in 32-bit NEC scancodes is different to that of the extended NEC scancodes. I chose this way as it maintains the order of the bits in the address/command fields, and CC is clearly intended to be the LSB of the command if the TiVo codes are anything to go by so it makes sense for AA to also be the LSB. The TiVo keymap is updated accordingly. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Jarod Wilson <jarod@redhat.com> Cc: linux-media@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
James Hogan authored
Add and document a generic sysfs based scancode filtering interface for making use of IR data matching hardware to filter out uninteresting scancodes. Two filters exist, one for normal operation and one for filtering scancodes which are permitted to wake the system from suspend. The following files are added to /sys/class/rc/rc?/: - filter: normal scancode filter value - filter_mask: normal scancode filter mask - wakeup_filter: wakeup scancode filter value - wakeup_filter_mask: wakeup scancode filter mask A new s_filter() driver callback is added which must arrange for the specified filter to be applied at the right time. Drivers can convert the scancode filter into a raw IR data filter, which can be applied immediately or later (for wake up filters). Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: linux-media@vger.kernel.org Cc: Rob Landley <rob@landley.net> Cc: linux-doc@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
James Hogan authored
Commit 1d184b0b ([media] media: rc: add raw decoder for Sharp protocol) added a new raw IR decoder for the sharp protocol, but didn't add the code to load the module at init as is done for other raw decoders, so add that code now. Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
- 04 Feb, 2014 11 commits
-
-
Antti Palosaari authored
Add USB ID [2040:f900] for Hauppauge WinTV-MiniStick 2. Device is build upon IT9135 chipset. Tested-by: Stefan Becker <schtefan@gmx.net> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Seppälä authored
There are reports[1] that on some motherboards loading the nuvoton-cir disables PS/2 keyboard input. This is caused by an erroneous write of CIR_INTR_MOUSE_IRQ_BIT to ACPI control register. According to datasheet the write enables mouse power management event interrupts which will probably have ill effects if the motherboard has only one PS/2 port with keyboard in it. The cir hardware does not need mouse interrupts to function and should not touch them. This patch removes the illegal writes and registry definitions. [1] http://ubuntuforums.org/showthread.php?t=2106277&p=12461912&mode=threaded#post12461912Reported-by: Bruno Maire <bruno.maire@besonet.ch> Tested-by: Bruno Maire <bruno.maire@besonet.ch> Signed-off-by: Antti Seppälä <a.seppala@gmail.com> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Joakim Hernberg authored
When tuning to 10818V on Astra 28E2, the system tunes to 11343V instead. This is a regression in the S471 driver introduced with the changeset: b43ea806 [media] cx23885: Fix TeVii S471 regression since introduction of ts2020. Suggested-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Joakim Hernberg <jhernberg@alchemy.lu> Tested-by: Mark Clarkstone <hello@markclarkstone.co.uk> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Sean Young authored
A number of recent bug reports involve usb_submit_urb() failing which was only reported with debug parameter on. In addition, remove custom debug function. [m.chehab@samsung.com: patch rebased, as one of the patches on this series need changes] Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Sean Young authored
Make the code simpler. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Sean Young authored
Just comments. No functional changes. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Frank Schaefer authored
Commit e63b009d "em28xx-i2c: Fix error code for I2C error transfers" changed the code to return -ETIMEDOUT on all unknown errors. But the proper error code for unknown errors is -EIO. So only report -ETIMEDOUT in case of the errors 0x02 and 0x04, which are according to Mauro Carvalho Chehab's tests related to i2c clock stretching and return -EIO for the rest. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Frank Schaefer authored
Commit d845fb3a "em28xx-i2c: add timeout debug information if i2c_debug enabled" has added wrong error descriptions for -ENXIO. The strings are also missing terminating newline characters, which breaks the output format. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Frank Schaefer authored
This avoids the unnecessary temporary registration of a dummy V4L2 clock. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Frank Schaefer authored
Since commit e63b009d the returned error code in case of not connected/responding i2c clients is ENXIO isntead of ENODEV, which causes several error messages on sensor probing. Fix the i2c return value checks on sensor probing to silence these warnings. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Frank Schaefer authored
[media] em28xx-video: do not unregister the v4l2 dummy clock before v4l2_device_unregister() has been called Otherwiese the core refuses to unregister the clock and the following warning appears in the system log: "WARNING: ... at drivers/media/v4l2-core/v4l2-clk.c:231 v4l2_clk_unregister+0x8a/0x90 [videodev]() v4l2_clk_unregister(): Refusing to unregister ref-counted 11-0030:mclk clock!" Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-