- 07 Jun, 2012 11 commits
-
-
Samuel Iglesias Gonsalvez authored
When a bus driver calls ipack_driver_register(), it should manages the returning NULL value to undo all the operations it did before this call, and print the corresponding trace. It is not a task for the ipack driver to call the remove() function here. Signed-off-by:
Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Samuel Iglesias Gonsalvez authored
Use idr interface to give the bus number. That way, we remove the limitation of 64 buses. The mutex is removed because the ida interface uses spinlocks inside, so it is not needed an extra lock. Signed-off-by:
-
Samuel Iglesias Gonsalvez authored
When ipack_device_register() is called, the variable tpci200->slots[dev->slot].dev has not assigned a value and it gives an error when the mezzanine driver is reading a register from the board for the match() function, as all the I/O functions call check_slot(). Signed-off-by:
-
Samuel Iglesias Gonsalvez authored
This field is not needed at all, as the IRQ is registered for the carrier not for the mezzanine. Signed-off-by:
-
Samuel Iglesias Gonsalvez authored
Signed-off-by:
-
Samuel Iglesias Gonsalvez authored
To avoid a dereference of a NULL pointer, the availability of the function is checked before its use. Signed-off-by:
-
Samuel Iglesias Gonsalvez authored
tpci200_slot_map_space() should return 0 if the operation was properly done. If not, the caller will think that something wrong happened. This patch establish the returned value to 0. It is overwritten in case of error. Signed-off-by:
-
Samuel Iglesias Gonsalvez authored
tpci200_slot_unmap_space() should return 0 if the operation was properly done. If not, the caller will think that something wrong happened. Signed-off-by:
-
Samuel Iglesias Gonsalvez authored
It should return the same value given by the match function of the ipack_driver that has been called. Returning 0 here, means that the match has failed and it could be succeed. Signed-off-by:
-
Samuel Iglesias Gonsalvez authored
To perform the installation of a mezzanine it was needed to write on these files, now it is not needed at all as the device model is properly implemented. Signed-off-by:
-
Sachin Kamat authored
version.h header file is no longer required. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
- 05 Jun, 2012 29 commits
-
-
Shubhrajyoti D authored
The memory regions of the probe and remove are move to __devinit and __devexit respectively. Acked-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by:
-
Shubhrajyoti D authored
The memory regions of the probe and remove are move to __devinit and __devexit respectively. Acked-by:
-
Lars-Peter Clausen authored
The IIO DAC drivers are in a reasonably good shape. They all make use of channel spec and non of them provides non-documented sysfs attributes. Code style should be OK as well, both checkpatch and coccicheck only report trivial issues. So lets move the whole folder out of staging. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Acked-by:
-
Lars-Peter Clausen authored
The header for this driver contains some private structs and defines, which do not have to be shared between multiple source files, as well as the platform data struct for this driver, which has to be shared with other source files. Since there is no need to expose those private structs and defines move them to the source file. Signed-off-by:
-
Lars-Peter Clausen authored
The header for this driver contains some private structs and defines, which do not have to be shared between multiple source files, as well as the platform data struct for this driver, which has to be shared with other source files. Since there is no need to expose those private structs and defines move them to the source file. Signed-off-by:
-
Lars-Peter Clausen authored
IRQ support is optional, so we have to check whether it was actually requested before we attempt to free it. Signed-off-by:
-
Lars-Peter Clausen authored
Use strtobool for parsing the powerdown value instead of strict_strtol, since the powerdown attribute is a boolean value. Signed-off-by:
-
Lars-Peter Clausen authored
Use strtobool for parsing the powerdown value instead of strict_strtol, since the powerdown attribute is a boolean value. Signed-off-by:
-
Lars-Peter Clausen authored
Use strtobool for parsing the powerdown value instead of strict_strtol, since the powerdown attribute is a boolean value. Signed-off-by:
-
Lars-Peter Clausen authored
Now that all drivers have been converted to channel spec, we can finally remove the dac.h file since it is no longer used. Signed-off-by:
-
Lars-Peter Clausen authored
Convert the max517 driver to channel spec. As part of the conversion the "out_voltage_1&2_raw" property, which updates both channel 1 and 2 simultaneously with the same value, is lost, since this is not really covered by the IIO spec and has only a limited use case in practice. Also the channel index for the sysfs files is now zero based instead of one based, which means all channel numbers will be lower by one. E.g. "out_voltage_1_scale" instead of "out_voltage_2_scale" Signed-off-by:
Roland Stigge <stigge@antcom.de> Signed-off-by:
-
Lars-Peter Clausen authored
None of these drivers use anything from dac.h, so remove the include. Signed-off-by:
-
Lars-Peter Clausen authored
Use extended channel attributes instead of raw sysfs files for the additional channel attributes. This allows us to remove some boilerplate code. Signed-off-by:
-
Lars-Peter Clausen authored
Use extended channel attributes instead of raw sysfs files for the additional channel attributes. This allows us to remove some boilerplate code. Signed-off-by:
-
Lars-Peter Clausen authored
Use extended channel attributes instead of raw sysfs files for the additional channel attributes. This allows us to remove some boilerplate code. Signed-off-by:
-
Lars-Peter Clausen authored
Use extended channel attributes instead of raw sysfs files for the additional channel attributes. This allows us to remove some boilerplate code. Signed-off-by:
-
Lars-Peter Clausen authored
Use extended channel attributes instead of raw sysfs files for the additional channel attributes. This allows us to remove some boilerplate code. Signed-off-by:
-
Lars-Peter Clausen authored
This allows us to remove some boilerplate code for comparing and formatting the enum strings. Signed-off-by:
-
Lars-Peter Clausen authored
This allows us to remove some boilerplate code for comparing and formatting the enum strings. Signed-off-by:
-
Lars-Peter Clausen authored
We often have the case were we do have a enum style channel attribute. These attributes have in common that they are a list of string values which usually map in a 1-to-1 fashion to integer values. This patch implements some common helper code for implementing enum style channel attributes using extended channel attributes. The helper functions take care of converting between the string and integer values, as well providing a function for "_available" attributes which list all available enum items. Signed-off-by:
-
Lars-Peter Clausen authored
Use iio_device_get and iio_device_put instead of open-coding it. Signed-off-by:
-
Lars-Peter Clausen authored
This patch add the iio_device_get() function, which increases the reference count of a iio device. The matching function to decrease the reference count - iio_device_put() - already exists. Signed-off-by:
-
Sachin Kamat authored
version.h header file is no longer required. Signed-off-by:
-
Michael Hennerich authored
Changes since V1: Apply Jonathan's review feedback: Introduce and use IIO_ALTVOLTAGE. Fix up comments and documentation. Remove dead code. Reorder some code fragments. Add missing iio_device_free. Convert to new API. Fix-up out of staging includes. Removed pll_locked attribute. Changes since V2: Use module_spi_driver. adf4350_remove: move gpio_free after regulator. target patch to drivers/iio Signed-off-by:Michael Hennerich <michael.hennerich@analog.com> Acked-by:
-
Michael Hennerich authored
Changes since V1: Apply Jonathan's review feedback: Revise device status attribute names, and split documentation into two sections. Add additional comments, and fix indention issues. Remove pointless zero initializations. Revise return value handling. Simplify some code sections. Split store_eeprom and sync handling into separate functions. Use strtobool where applicable. Document platform data structures using kernel-doc style. Use dev_to_iio_dev write_raw IIO_CHAN_INFO_FREQUENCY: Reject values <= 0 Make patch target drivers/iio Changes since V2: Use for_each_clear_bit() and __set_bit() where applicable. Add descriptive comment. Avoid temporary for struct regulator. spi_device_id name use ad9523-1, ad9523 will be added later. Signed-off-by:
-
Johan Hovold authored
Add sub-driver for the ambient-light-sensor interface on National Semiconductor / TI LM3533 lighting power chips. The sensor interface can be used to control the LEDs and backlights of the chip through defining five light zones and three sets of corresponding output-current values. The driver provides raw and mean adc readings along with the current light zone through sysfs. A threshold event can be generated on zone changes. The ALS-control output values can be set per zone for the three current output channels. Signed-off-by:
Johan Hovold <jhovold@gmail.com> Acked-by:
-
Kevin McKinney authored
This patch removes typedef for _MINI_ADAPTER, changes the name of the struct from _MINI_ADAPTER to bcm_mini_adapter. In addition, any calls to the following typedefs "MINI_ADAPTER, *PMINI_ADAPTER" are changed to call the struct directly. Signed-off-by:
Kevin McKinney <klmckinney1@gmail.com> Signed-off-by:
-
Kevin McKinney authored
This patch removes typedef for _LEADER, changes the name of the struct from _LEADER to bcm_leader. In addition, any calls to the following typedefs "LEADER, *PLEADER" are changed to call the struct directly. Signed-off-by:
-
Kevin McKinney authored
This patch removes typedef for _PACKETTOSEND, changes the name of the struct from _PACKETTOSEND to bcm_packettosend. In addition, any calls to the following typedefs "PACKETTOSEND, *PPACKETTOSEND" are changed to call the struct directly. Signed-off-by:
-
