- 12 Nov, 2020 1 commit
-
-
Zhu Yanjun authored
Since the commit fd49ddaf ("RDMA/rxe: prevent rxe creation on top of vlan interface") does not permit rxe on top of vlan device, all the stuff related with vlan should be removed. Fixes: fd49ddaf ("RDMA/rxe: prevent rxe creation on top of vlan interface") Link: https://lore.kernel.org/r/1604326422-18625-1-git-send-email-yanjunz@nvidia.comSigned-off-by:
Zhu Yanjun <yanjunz@nvidia.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com>
-
- 02 Nov, 2020 17 commits
-
-
Meir Lichtinger authored
The IBTA specification has new speed - NDR. That speed supports signaling rate of 100Gb. mlx5 IB driver translates link modes reported by ConnectX device to IB speed and width. Added translation of new 100Gb, 200Gb and 400Gb link modes to NDR IB type and width of x1, x2 or x4 respectively. Link: https://lore.kernel.org/r/20201026133738.1340432-3-leon@kernel.orgSigned-off-by:
Meir Lichtinger <meirl@mellanox.com> Signed-off-by:
-
Meir Lichtinger authored
Add new IBTA speed NDR, supporting signaling rate of 100Gb. Link: https://lore.kernel.org/r/20201026133738.1340432-2-leon@kernel.orgSigned-off-by:
-
Meir Lichtinger authored
The IBTA specification has new speeds - HDR and NDR, supporting signaling rate of 50Gb and 100Gb respectively. ethtool support of ipoib driver translates IB speed to signaling rate. Added translation of HDR and NDR IB types to rates of 50Gb and 100Gb ethernet speed. Link: https://lore.kernel.org/r/20201026132904.1338526-1-leon@kernel.orgSigned-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Jason Gunthorpe authored
These two drivers open code the call to POST_SEND and do not use the rdma-core wrapper to do it, thus their usages was missed during the audit. Both drivers use this as a doorbell to signal the kernel to start DMA. Fixes: 628c02bf ("RDMA: Remove uverbs cmds from drivers that don't use them") Link: https://lore.kernel.org/r/0-v1-4608c5610afa+fb-uverbs_cmd_post_send_fix_jgg@nvidia.comReported-by:
Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by:
-
Zhang Qilong authored
The rv cannot be 'EAGAIN' in the previous path, we should use '-EAGAIN' to check it. For example: Call trace: ->siw_cm_work_handler ->siw_proc_mpareq ->siw_recv_mpa_rr Link: https://lore.kernel.org/r/20201028122509.47074-1-zhangqilong3@huawei.comSigned-off-by:
Zhang Qilong <zhangqilong3@huawei.com> Reviewed-by:
Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by:
-
Jason Gunthorpe authored
Now that all the PAS arrays or UMR XLT's for mkcs are filled using rdma_for_each_block() we can use the common ib_umem_find_best_pgsz() algorithm. Link: https://lore.kernel.org/r/20201026132314.1336717-6-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
Mixing these together is just a mess, make a dedicated version, mlx5_ib_update_mr_pas(), which directly loads the whole MTT for a non-ODP MR. The split out version can trivially use a simple loop with rdma_for_each_block() which allows using the core code to compute the MR pages and avoids seeking in the SGL list after each chunk as the __mlx5_ib_populate_pas() call required. Significantly speeds loading large MTTs. Link: https://lore.kernel.org/r/20201026132314.1336717-5-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
The memory allocation is quite complicated, and makes this function hard to understand. Refactor things so that a function call sets up the WR, SG, DMA mapping and buffer, further splitting that into buffer and DMA/wr. This also slightly changes the buffer allocation logic to try an order 0 page allocation (with OOM warnings on) before going to the emergency page. Link: https://lore.kernel.org/r/20201026132314.1336717-4-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
This is the only user, so remove the wrappers. Link: https://lore.kernel.org/r/20201026132314.1336717-3-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
This routine converts the umem SGL into a list of fixed pages for DMA, which is exactly what rdma_umem_for_each_dma_block() is for, use the common code directly. Link: https://lore.kernel.org/r/20201026132314.1336717-2-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
Most callers don't need this, and the few that do can get it as ib_umem_num_pages(umem). Link: https://lore.kernel.org/r/20201026131936.1335664-8-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
This is the same as ib_umem_num_dma_blocks(umem, 1UL << page_shift), have the callers compute it directly. Link: https://lore.kernel.org/r/20201026131936.1335664-7-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
Only alloc_mr_from_cache() needs order and can trivially compute it, so lift it to the one call site and remove the NULL arguments. Link: https://lore.kernel.org/r/20201026131936.1335664-6-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
For the user MR path, instead of calling this after getting the umem, call it as part of creating the struct mlx5_ib_mr and distill its output to a single page_shift stored inside the mr. This avoids passing around the tuple of its output. Based on the umem and page_shift, the output arguments can be computed using: count == ib_umem_num_pages(mr->umem) shift == mr->page_shift ncont == ib_umem_num_dma_blocks(mr->umem, 1 << mr->page_shift) order == order_base_2(ncont) And since mr->page_shift == umem_odp->page_shift then ncont == ib_umem_num_dma_blocks() == ib_umem_odp_num_pages() for ODP umems. Link: https://lore.kernel.org/r/20201026131936.1335664-5-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
This is the same value as ib_umem_num_pages(mr->umem), use that instead. Link: https://lore.kernel.org/r/20201026131936.1335664-4-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
reg_pages should always contain mr->npage since when the mr is finally de-reg'd it is always subtracted out. If there were any error exits then mlx5_ib_rereg_user_mr() would leave the reg_pages adjusted and this will cause it to be double subtracted eventually. The manipulation of reg_pages is inherently connected to the umem, so lift it out of set_mr_fields() and only adjust it around creating/destroying a umem. reg_pages is only used for diagnostics in sysfs. Fixes: 7d0cc6ed ("IB/mlx5: Add MR cache for large UMR regions") Link: https://lore.kernel.org/r/20201026131936.1335664-3-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
The is only ever set to non-zero if the MR is from the cache, and if it is cached then the order is in cached_ent->order. Make it clearer that use_umr_mtt_update() only returns true for cached MRs and remove the redundant data. Link: https://lore.kernel.org/r/20201026131936.1335664-2-leon@kernel.orgSigned-off-by:
-
- 31 Oct, 2020 2 commits
-
-
Joe Perches authored
Manual changes for sysfs_emit as cocci scripts can't easily convert them. Link: https://lore.kernel.org/r/ecde7791467cddb570c6f6d2c908ffbab9145cac.1602122880.git.joe@perches.comSigned-off-by:
Joe Perches <joe@perches.com> Reviewed-by:
Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by:
-
Joe Perches authored
Make changes to use sysfs_emit in the RDMA code as cocci scripts can not be written to handle _all_ the possible variants of various sprintf family uses in sysfs show functions. While there, make the code more legible and update its style to be more like the typical kernel styles. Miscellanea: o Use intermediate pointers for dereferences o Add and use string lookup functions o return early when any intermediate call fails so normal return is at the bottom of the function o mlx4/mcg.c:sysfs_show_group: use scnprintf to format intermediate strings Link: https://lore.kernel.org/r/f5c9e4c9d8dafca1b7b70bd597ee7f8f219c31c8.1602122880.git.joe@perches.comSigned-off-by:
-
- 28 Oct, 2020 19 commits
-
-
Weihang Li authored
Add a interface to fill GMV(SGID/SMAC/VLAN) table for HIP09, all of above source address information is stored as an entry in GMV table. The users just need to provide the index to the hardware when POST SEND. Link: https://lore.kernel.org/r/1603508836-33054-3-git-send-email-liweihang@huawei.comSigned-off-by:
Weihang Li <liweihang@huawei.com> Signed-off-by:
-
Weihang Li authored
HIP09 supports to store SGID/SMAC/VLAN together in a table named GMV. The driver needs to allocate memory for it and tell the information about this region to hardware. Link: https://lore.kernel.org/r/1603508836-33054-2-git-send-email-liweihang@huawei.comSigned-off-by:
-
Guoqing Jiang authored
Remove the argument since it is not used in the function. Link: https://lore.kernel.org/r/20201023074353.21946-13-jinpu.wang@cloud.ionos.comSigned-off-by:
Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by:
-
Guoqing Jiang authored
Since the three functions share the similar logic, let's introduce one common function for it. Link: https://lore.kernel.org/r/20201023074353.21946-12-jinpu.wang@cloud.ionos.comSigned-off-by:
-
Guoqing Jiang authored
This function isn't needed since no caller checks the old_state of sess. Link: https://lore.kernel.org/r/20201023074353.21946-11-jinpu.wang@cloud.ionos.comSigned-off-by:
-
Gioh Kim authored
process_info_rsp checks that sg_cnt is zero twice. Link: https://lore.kernel.org/r/20201023074353.21946-10-jinpu.wang@cloud.ionos.comSigned-off-by:
Gioh Kim <gi-oh.kim@cloud.ionos.com> Signed-off-by:
-
Gioh Kim authored
The events returning the same error value are put together. Link: https://lore.kernel.org/r/20201023074353.21946-9-jinpu.wang@cloud.ionos.comSigned-off-by:
-
Gioh Kim authored
The direction of DMA operation is already in the rtrs_iu Link: https://lore.kernel.org/r/20201023074353.21946-8-jinpu.wang@cloud.ionos.comSigned-off-by:
-
Guoqing Jiang authored
It should mean region here. Fixes: 9cb83748 ("RDMA/rtrs: server: main functionality") Link: https://lore.kernel.org/r/20201023074353.21946-7-jinpu.wang@cloud.ionos.comSigned-off-by:
-
Guoqing Jiang authored
The purpose of srv_mutex is to protect srv_list as in put_srv, so no need to hold it when allocate memory for srv since it could be time consuming. Otherwise if one machine has limited memory, rsrv_close_work could be blocked for a longer time due to the mutex is held by get_or_create_srv since it can't get memory in time. INFO: task kworker/1:1:27478 blocked for more than 120 seconds. Tainted: G O 4.14.171-1-storage #4.14.171-1.3~deb9 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kworker/1:1 D 0 27478 2 0x80000000 Workqueue: rtrs_server_wq rtrs_srv_close_work [rtrs_server] Call Trace: ? __schedule+0x38c/0x7e0 schedule+0x32/0x80 schedule_preempt_disabled+0xa/0x10 __mutex_lock.isra.2+0x25e/0x4d0 ? put_srv+0x44/0x100 [rtrs_server] put_srv+0x44/0x100 [rtrs_server] rtrs_srv_close_work+0x16c/0x280 [rtrs_server] process_one_work+0x1c5/0x3c0 worker_thread+0x47/0x3e0 kthread+0xfc/0x130 ? trace_event_raw_event_workqueue_execute_start+0xa0/0xa0 ? kthread_create_on_node+0x70/0x70 ret_from_fork+0x1f/0x30 Let's move all the logics from __find_srv_and_get and __alloc_srv to get_or_create_srv, and remove the two functions. Then it should be safe for multiple processes to access the same srv since it is protected with srv_mutex. And since we don't want to allocate chunks with srv_mutex held, let's check the srv->refcount after get srv because the chunks could not be allocated yet. Fixes: 9cb83748 ("RDMA/rtrs: server: main functionality") Link: https://lore.kernel.org/r/20201023074353.21946-6-jinpu.wang@cloud.ionos.comSigned-off-by: -
Gioh Kim authored
When rtrs_rdma_conn_established returns error (non-zero value), the error value is stored in con->cm_err and it cannot trigger rtrs_rdma_error_recovery. Finally the error of rtrs_rdma_con_established will be forgot. Fixes: 6a98d71d ("RDMA/rtrs: client: main functionality") Link: https://lore.kernel.org/r/20201023074353.21946-5-jinpu.wang@cloud.ionos.comSigned-off-by:
-
Jack Wang authored
It could happen two kworkers race with each other: CPU0 CPU1 addr_resolver kworker reconnect kworker rtrs_clt_rdma_cm_handler rtrs_rdma_addr_resolved create_con_cq_qp: s.dev_ref++ "s.dev_ref is 1" wait in create_cm fails with TIMEOUT destroy_con_cq_qp: --s.dev_ref "s.dev_ref is 0" destroy_con_cq_qp: sess->s.dev = NULL rtrs_cq_qp_create -> create_qp(con, sess->dev->ib_pd...) sess->dev is NULL, panic. To fix the problem using mutex to serialize create_con_cq_qp and destroy_con_cq_qp. Fixes: 6a98d71d ("RDMA/rtrs: client: main functionality") Link: https://lore.kernel.org/r/20201023074353.21946-4-jinpu.wang@cloud.ionos.comSigned-off-by: -
Jack Wang authored
As run destroy_con_cq_qp many times doesn't work, remove the comments. Fixes: 6a98d71d ("RDMA/rtrs: client: main functionality") Link: https://lore.kernel.org/r/20201023074353.21946-3-jinpu.wang@cloud.ionos.comSuggested-by:
-
Danil Kipnis authored
We call destroy_con_cq_qp(con) in rtrs_rdma_addr_resolved() in case route couldn't be resolved and then again in create_cm() because nothing happens. Don't call destroy_con_cq_qp from rtrs_rdma_addr_resolved, create_cm() does the clean up already. Fixes: 6a98d71d ("RDMA/rtrs: client: main functionality") Link: https://lore.kernel.org/r/20201023074353.21946-2-jinpu.wang@cloud.ionos.comSigned-off-by:
Danil Kipnis <danil.kipnis@cloud.ionos.com> Signed-off-by:
-
Lang Cheng authored
The doorbell needs to store PI information into QPC, so the RoCEE should wait for the results of storing, that is, it needs two bus operations to complete a doorbell. When ROCEE is in SDI mode, multiple doorbells may be interlocked because the RoCEE can only handle bus operations serially. So a flag to mark if HIP09 is working in SDI mode is added. When the SDI flag is set, the ROCEE will ignore the PI information of the doorbell, continue to fetch wqe and verify its validity by it's owner_bit. Link: https://lore.kernel.org/r/1603195493-22741-1-git-send-email-liweihang@huawei.comSigned-off-by:
Lang Cheng <chenglang@huawei.com> Signed-off-by:
-
Max Gurtovoy authored
Currently, iser target support max IO size of 16MiB by default. For some adapters, allocating this amount of resources might reduce the total number of possible connections that can be created. For those adapters, it's preferred to reduce the max IO size to be able to create more connections. Since there is no handshake procedure for max IO size in iser protocol, set the default max IO size to 1MiB and add a module parameter for enabling the option to control it for suitable adapters. Fixes: 317000b9 ("IB/isert: allocate RW ctxs according to max IO size") Link: https://lore.kernel.org/r/20201019094628.17202-1-mgurtovoy@nvidia.comReported-by:
Krishnamraju Eraparaju <krishna2@chelsio.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by:
-
Bob Pearson authored
The code which limited the number of unacknowledged PSNs was incorrect. The PSNs are limited to 24 bits and wrap back to zero from 0x00ffffff. The test was computing a 32 bit value which wraps at 32 bits so that qp->req.psn can appear smaller than the limit when it is actually larger. Replace '>' test with psn_compare which is used for other PSN comparisons and correctly handles the 24 bit size. Fixes: 8700e3e7 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20201013170741.3590-1-rpearson@hpe.comSigned-off-by:
Bob Pearson <rpearson@hpe.com> Signed-off-by:
-
Jing Xiangfeng authored
Fix to return error code PTR_ERR() from the error handling case instead of 0. Fixes: 51aab126 ("RDMA/core: Get xmit slave for LAG") Link: https://lore.kernel.org/r/20201016075845.129562-1-jingxiangfeng@huawei.comSigned-off-by:
Jing Xiangfeng <jingxiangfeng@huawei.com> Reviewed-by:
Maor Gottlieb <maorg@nvidia.com> Signed-off-by:
-
Arnd Bergmann authored
Nested container_of() calls work correctly but cause a warning when building with W=2. Invoking it from an inline function like in drivers/infiniband/hw/mlx5/mlx5_ib.h means we get hundreds of warnings like: include/linux/kernel.h:852:8: warning: declaration of '__mptr' shadows a previous local [-Wshadow] 852 | void *__mptr = (void *)(ptr); \ | ^~~~~~ include/rdma/uverbs_ioctl.h:651:11: note: in expansion of macro 'container_of' 651 | (udata ? container_of(container_of(udata, struct uverbs_attr_bundle, \ | ^~~~~~~~~~~~ include/rdma/uverbs_ioctl.h:651:24: note: in expansion of macro 'container_of' 651 | (udata ? container_of(container_of(udata, struct uverbs_attr_bundle, \ | ^~~~~~~~~~~~ drivers/infiniband/hw/mthca/mthca_qp.c:564:35: note: in expansion of macro 'rdma_udata_to_drv_context' 564 | struct mthca_ucontext *context = rdma_udata_to_drv_context( | ^~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/kernel.h:852:8: note: shadowed declaration is here 852 | void *__mptr = (void *)(ptr); \ | ^~~~~~ include/rdma/uverbs_ioctl.h:651:11: note: in expansion of macro 'container_of' 651 | (udata ? container_of(container_of(udata, struct uverbs_attr_bundle, \ | ^~~~~~~~~~~~ drivers/infiniband/hw/mthca/mthca_qp.c:564:35: note: in expansion of macro 'rdma_udata_to_drv_context' 564 | struct mthca_ucontext *context = rdma_udata_to_drv_context( | ^~~~~~~~~~~~~~~~~~~~~~~~~ In file included from <command-line>: include/linux/kernel.h:852:8: warning: declaration of '__mptr' shadows a previous local [-Wshadow] 852 | void *__mptr = (void *)(ptr); \ | ^~~~~~ Rewrite the macro to use an inline function internally, which makes it more readable and reduces the amount of useless output from make W=2. Fixes: 730623f4 ("IB/verbs: Add helper function rdma_udata_to_drv_context") Link: https://lore.kernel.org/r/20201026161549.3709175-1-arnd@kernel.orgSigned-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
- 27 Oct, 2020 1 commit
-
-
Selvin Xavier authored
Only static WQE is supported for SRQ. So always use the max supported SGEs while calculating SRQ entry size. Fixes: 2bb3c32c ("RDMA/bnxt_re: Change wr posting logic to accommodate variable wqes") Link: https://lore.kernel.org/r/1602569752-12745-1-git-send-email-selvin.xavier@broadcom.comSigned-off-by:
Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by:
Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by:
-
