- 21 Dec, 2023 40 commits
-
-
Anshuman Gupta authored
Add per pci device vram_d3cold_threshold Sysfs to control the d3cold allowed knob. Adding a d3cold structure embedded in xe_device to encapsulate d3cold related stuff. v2: - Check total vram before initializing default threshold. [Riana] - Add static scope to vram_d3cold_threshold DEVICE_ATTR. [Riana] v3: - Fixed cosmetics review comment. [Riana] - Fixed CI Hook failures. - Used drmm_mutex_init(). v4: - Fixed kernel-doc warnings. v5: - Added doc explaining need for the device sysfs. [Rodrigo] - Removed TODO comment. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by:
Riana Tauro <riana.tauro@intel.com> Acked-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230718080703.239343-4-anshuman.gupta@intel.comSigned-off-by:
-
Anshuman Gupta authored
Wrap xe_pm_runtime_init inside xe_pm_init. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Anshuman Gupta authored
Adding pci d3cold_capable check in order to initialize d3cold_allowed as false statically. It avoids vram save/restore latency during runtime suspend/resume v2: - Added else block to xe_pci_runtime_idle. [Rodrigo] Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Riana Tauro authored
Currently GuCRC is disabled in suspend path for xe. Rc6 is a prerequiste to enable s0ix and should not be disabled for s2idle. There is no requirement to disable GuCRC for S3+. Remove it from xe_guc_pc_stop, thus removing from suspend path. Retain the call in other places where xe_guc_pc_stop is called. v2: add description and return statement to kernel-doc (Rodrigo) v3: update commit message (Rodrigo) v4: add mem_access_get to the gucrc disable function Signed-off-by:
-
Francois Dugast authored
Reduce the number of warnings reported by checkpatch.pl from 118 to 48 by addressing those warnings types: LEADING_SPACE LINE_SPACING BRACES TRAILING_SEMICOLON CONSTANT_COMPARISON BLOCK_COMMENT_STYLE RETURN_VOID ONE_SEMICOLON SUSPECT_CODE_INDENT LINE_CONTINUATIONS UNNECESSARY_ELSE UNSPECIFIED_INT UNNECESSARY_INT MISORDERED_TYPE Signed-off-by:
Francois Dugast <francois.dugast@intel.com> Reviewed-by:
Matthew Brost <matthew.brost@intel.com> Signed-off-by:
-
Francois Dugast authored
Lower log level of XE_IOCTL_ERR macro to debug in order to prevent flooding kernel log. v2: Rename XE_IOCTL_ERR to XE_IOCTL_DBG (Rodrigo Vivi) v3: Rebase v4: Fix style, remove unrelated change about __FILE__ and __LINE__ Link: https://lists.freedesktop.org/archives/intel-xe/2023-May/004704.htmlSigned-off-by:
-
Francois Dugast authored
Fix minor issues: remove extra ';' and s/Initialise/Initialize/. Signed-off-by:
-
Francois Dugast authored
Remove some style issues of type COMPLEX_MACRO reported by checkpatch. Signed-off-by:
-
Francois Dugast authored
Remove all existing style issues of type TRAILING_WHITESPACE reported by checkpatch. Signed-off-by:
-
Francois Dugast authored
Remove all existing style issues of type CODE_INDENT reported by checkpatch. Signed-off-by:
-
Francois Dugast authored
Remove all existing style issues of type POINTER_LOCATION reported by checkpatch. Signed-off-by:
-
Francois Dugast authored
Remove almost all existing style issues of type OPEN_BRACE reported by checkpatch. Signed-off-by:
-
Francois Dugast authored
Remove almost all existing style issues of type SPACING reported by checkpatch. Signed-off-by:
-
Brian Welty authored
We need to hold vm->lock before the xe_vm_is_closed_or_banned(). Else we get this splat: [ 802.555227] ------------[ cut here ]------------ [ 802.555234] WARNING: CPU: 33 PID: 3122 at drivers/gpu/drm/xe/xe_vm.h:60 [ 802.555515] CPU: 33 PID: 3122 Comm: xe_exec_fault_m Tainted: ... [ 802.555709] Call Trace: [ 802.555714] <TASK> [ 802.555720] ? __warn+0x81/0x170 [ 802.555737] ? xe_vm_madvise_ioctl+0x2de/0x440 [xe] Fixes: 9d858b69 ("drm/xe: Ban a VM if rebind worker hits an error") Reviewed-by:
Brian Welty <brian.welty@intel.com> Signed-off-by:
-
Brian Welty authored
It was missed that print_op needs to include DRM_GPUVA_OP_PREFETCH. Else we hit the impossible BUG_ON: [ 886.371040] ------------[ cut here ]------------ [ 886.371047] kernel BUG at drivers/gpu/drm/xe/xe_vm.c:2234! [ 886.371216] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 886.371229] CPU: 1 PID: 3132 Comm: xe_exec_fault_m [ 886.371257] RIP: 0010:vm_bind_ioctl_ops_create+0x45f/0x470 [xe] ... [ 886.371517] Call Trace: [ 886.371525] <TASK> [ 886.371531] ? __die_body+0x1a/0x60 [ 886.371546] ? die+0x38/0x60 [ 886.371557] ? do_trap+0x10a/0x120 [ 886.371568] ? vm_bind_ioctl_ops_create+0x45f/0x470 [xe] v2: add debug print for PREFETCH in print_op Fixes: b06d47be ("drm/xe: Port Xe to GPUVA") Reviewed-by:
-
Matthew Auld authored
It looks like the single-tile PVC in CI dies during module load when doing the pcode init. From the logs we try to access the address 0000000000138124 which doesn't map to anything, however 0x138124 also looks to be the PCODE_MAILBOX register. So looks like the per-tile mmio register mapping is NULL. During probe the tile count is potentially trimmed, since we don't know the real count until we actually probe the device. This seems to be the case for single-tile PVC or similar devices. However it looks like the gt_count is never adjusted to respect this updated tile count. As a result when later doing some for_each_gt() loop, like we do for the pcode, we can get back some GT that maps to some non-existent tile which hasn't been properly set up, leading to crashes. Try to fix this by adjusting the gt_count after probing the tiles for real. v2: Fix typo so it actually builds References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/383Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Ofir Bitton <obitton@habana.ai> Signed-off-by:
-
Matthew Auld authored
In various test cases that put the system under a heavy load, we can sometimes see errors with missed TLB invalidations. In such cases we see the interrupt arrive for the invalidation from the GuC, however the actual processing of the completion is pushed onto a workqueue and handled with all the other CT stuff, which might take longer than expected. Since we expect TLB invalidations to complete within a reasonable amount of time (at most ~250ms), and they do seem pretty critical, allow handling directly from the CT fast-path. v2 (José): - Actually use the correct spinlock/unlock_irq, since pending_lock is grabbed from IRQ. v3: - Don't publish the TLB fence on the list until after we fully initialize it and successfully do the CT send. The list is now only protected by the spin_lock pending_lock and we can't hold that across the entire TLB send operation. v4 (Matt Brost): - Be careful with racing against fast CT path writing the seqno, before we have actually published the fence. References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/297 References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/320 References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/449Signed-off-by: -
Matthew Auld authored
Looks to always to be zero when inspecting the CTB dump. Signed-off-by:
-
Matthew Auld authored
To help debugging, sample the current seqno_recv and dump it out if we encounter a TLB timeout for the fences path. Signed-off-by:
-
Matthew Auld authored
We might have various kworkers waiting for TLB flushes to complete which are not tracked with an explicit TLB fence, however at this stage that will never happen since the CT is already disabled, so make sure we signal them here under the assumption that we have completed a full GT reset. v2: - We need to use seqno - 1 here. After acquiring ct->lock the seqno is actually the next users seqno and not the pending one. Signed-off-by: -
Matthew Auld authored
Assumption here is that submission is disabled along with CT, and full GT reset will also nuke TLBs, so should be safe to signal all in-flight TLB fences, but only after the actual reset so move the placement slightly. Signed-off-by:
-
Matthew Auld authored
The fast-path CT could be running as we enter a runtime-suspend or potentially a GT reset, however here we only use the ct->fast_lock and not the full ct->lock. Before disabling the CT, also serialise against the fast_lock to ensure any in-progress work finishes before we start nuking the CT related stuff. Once we disable ct->enabled and drop the lock, any new work should fail gracefully, and anything that was in progress should be finished. Signed-off-by:
-
Matthew Auld authored
If we are in the middle of a GT reset or similar the CT might be disabled, such that the CT send fails. However we already incremented gt->tlb_invalidation.seqno which might lead to warnings, since we effectively just skipped a seqno: 0000:00:02.0: drm_WARN_ON(expected_seqno != msg[0]) Signed-off-by: -
Matthew Auld authored
Reserving and checking for space on the g2h side relies on the fast_lock, and not the CT lock since we need to release space from the fast CT path. Make sure we hold it when checking for space and reserving it. The main concern is calling __g2h_release_space() as we are reserving something and since the info.space and info.g2h_outstanding operations are not atomic we can get some nonsense values back. Signed-off-by:
-
Matthew Auld authored
Just checking xe_device_mem_access_ongoing() is not enough, we also need to hold the reference otherwise the ref can transition from 1 -> 0 as we enter g2h_read(), leading to warnings. While we can't do a full rpm sync in the IRQ, we can keep the device awake if the ref is non-zero. Introduce a new helper for this and set it to work in for the CT fast-path. Signed-off-by:
-
Matthew Auld authored
Ensure we load gt->tlb_invalidation.seqno_recv once, and use that for our seqno checking. The gt->tlb_invalidation_seqno_past is a shared global variable and can potentially change at any point here. However the checks here need to operate on a stable version of seqno_recv for this to make any sense. Signed-off-by:
-
Matthew Auld authored
wake_up_all() and wait_event_timeout() already have the correct barriers as per https://www.kernel.org/doc/Documentation/memory-barriers.txt. This should ensure that the seqno_recv write can't be re-ordered wrt to the actual wake_up_all() i.e we get woken up but there is no write. The reader side with wait_event_timeout() also has the correct barriers. With that drop the hand rolled smp_wmb(), which is anyway missing some kind of matching barrier on the reader side. Signed-off-by:
-
Matthew Brost authored
Rather than open coding VM binds and VMA tracking, use the GPUVA library. GPUVA provides a common infrastructure for VM binds to use mmap / munmap semantics and support for VK sparse bindings. The concepts are: 1) xe_vm inherits from drm_gpuva_manager 2) xe_vma inherits from drm_gpuva 3) xe_vma_op inherits from drm_gpuva_op 4) VM bind operations (MAP, UNMAP, PREFETCH, UNMAP_ALL) call into the GPUVA code to generate an VMA operations list which is parsed, committed, and executed. v2 (CI): Add break after default in case statement. v3: Rebase v4: Fix some error handling v5: Use unlocked version VMA in error paths v6: Rebase, address some review feedback mainly Thomas H v7: Fix compile error in xe_vma_op_unwind, address checkpatch Signed-off-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by:
-
Matthew Brost authored
Not needed so remove it. Reviewed-by:
-
Matthew Brost authored
This will help with the GPUVA port as the internals of struct xe_vma will change. v2: Update comment around helpers Reviewed-by:
Thomas Hellström <thomas.hellstrom@linux.kernel.org> Signed-off-by:
-
Matthew Brost authored
We cannot recover a VM if a rebind worker hits an error, ban the VM if happens to ensure we do not attempt to place this VM on the hardware again. A follow up will inform the user if this happens. v2: Return -ECANCELED in exec VM closed or banned, check for closed or banned within VM lock. v3: Fix lockdep splat by looking engine outside of vm->lock v4: Fix error path when engine lookup fails v5: Add debug message in rebind worker on error, update comments wrt locking, add xe_vm_close helper Reviewed-by:
-
Matthew Brost authored
xe_vm_create used the IOCTL create flags in a few places rather than the internal VM flags and this just happened to work as these values matched. This is risky (and incorrect) as the internal flag values are free to change. Fix this and use the internal VM flag values. Signed-off-by:
-
Tejas Upadhyay authored
Since commit ee6d3dd4 ("driver core: make kobj_type constant.") the driver core allows the usage of const struct kobj_type. Take advantage of this to constify the structure definition to prevent modification at runtime. Reviewed-by:
Nirmoy Das <nirmoy.das@intel.com> Signed-off-by:
Tejas Upadhyay <tejas.upadhyay@intel.com> Signed-off-by:
-
Tejas Upadhyay authored
Currently return from xe_gt_sysfs_init() is ignored and also a failure in xe_gt_sysfs_init() isn't fatal so make it return void. V2 : - add drm_warn in error paths - Himal - Edit commit message - Nirmoy Acked-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by:
Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Reviewed-by:
-
Alan Previn authored
In the ABI header, GUC_CTB_MSG_MIN_LEN is '1' because GUC_CTB_HDR_LEN is 1. This aligns with H2G/G2H CTB specification where all command formats are defined in units of dwords so that '1' is a dword. Accordingly, GUC_CTB_MSG_MAX_LEN is 256-1 (i.e. 255 dwords). However, h2g_write was incorrectly assuming that GUC_CTB_MSG_MAX_LEN was in bytes. Fix this. v3: Fix nit on #define location.(Matt) v2: By correctly treating GUC_CTB_MSG_MAX_LEN as dwords, it causes a local array to consume 4x the stack size. Rework the function to avoid consuming stack even if the action size is large. (Matt) Signed-off-by:Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by:
-
Jani Nikula authored
Little by little, make stuff feature complete. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Thomas Hellström authored
If the default engine m->eng was used, there is no check for idle and a cpu page-table update may thus happen in parallel with a gpu one. Don't allow CPU page-table updates with the default engine until the engine is idle. Signed-off-by:
-
Matt Roper authored
Newer Intel platforms require that inspect the contents of the GMD_ID registers very early in the driver initialization process to determine the IP version (and proper init sequences), of the platform. Move the general PCI device setup and enablement slightly earlier, before we start trying to peek at the GMD_ID registers. Reviewed-by:
Gustavo Sousa <gustavo.sousa@intel.com> Link: https://lore.kernel.org/r/20230614205202.3376752-5-matthew.d.roper@intel.comSigned-off-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Matt Roper authored
If the GMD_ID register reports a higher media revision ID than we're expecting, print the media revid, not the graphics revid, in the debug message. Reviewed-by:
-
Matt Roper authored
It's legitimate for the media GMD_ID register to read back as 0x0 if media functionality is fused off or otherwise not present on the platform. Avoid printing an "unknown media version" error message for this case. Reviewed-by:
-
