There are a few PHY drivers that can handle SFP modules through their
sfp_upstream_ops. Introduce Phylib helpers to keep track of connected
SFP PHYs in a netdevice's namespace, by adding the SFP PHY to the
upstream PHY's netdev's namespace.

By doing so, these SFP PHYs can be enumerated and exposed to users,
which will be able to use their capabilities.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pass the phy_device as a parameter to the sfp upstream .disconnect_phy
operation. This is preparatory work to help track phy devices across
a net_device's link.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Link topologies containing multiple network PHYs attached to the same
net_device can be found when using a PHY as a media converter for use
with an SFP connector, on which an SFP transceiver containing a PHY can
be used.

With the current model, the transceiver's PHY can't be used for
operations such as cable testing, timestamping, macsec offload, etc.

The reason being that most of the logic for these configuration, coming
from either ethtool netlink or ioctls tend to use netdev->phydev, which
in multi-phy systems will reference the PHY closest to the MAC.

Introduce a numbering scheme allowing to enumerate PHY devices that
belong to any netdev, which can in turn allow userspace to take more
precise decisions with regard to each PHY's configuration.

The numbering is maintained per-netdev, in a phy_device_list.
The numbering works similarly to a netdevice's ifindex, with
identifiers that are only recycled once INT_MAX has been reached.

This prevents races that could occur between PHY listing and SFP
transceiver removal/insertion.

The identifiers are assigned at phy_attach time, as the numbering
depends on the netdevice the phy is attached to. The PHY index can be
re-used for PHYs that are persistent.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cross-merge networking fixes after downstream PR.

No conflicts.

Adjacent changes:

drivers/net/ethernet/broadcom/bnxt/bnxt.h
  c948c097 ("bnxt_en: Don't clear ntuple filters and rss contexts during ethtool ops")
  f2878cde ("bnxt_en: Add support to call FW to update a VNIC")

Link: https://patch.msgid.link/20240822210125.1542769-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says:

====================
Unmask upper DSCP bits - part 1

tl;dr - This patchset starts to unmask the upper DSCP bits in the IPv4
flow key in preparation for allowing IPv4 FIB rules to match on DSCP.
No functional changes are expected.

The TOS field in the IPv4 flow key ('flowi4_tos') is used during FIB
lookup to match against the TOS selector in FIB rules and routes.

It is currently impossible for user space to configure FIB rules that
match on the DSCP value as the upper DSCP bits are either masked in the
various call sites that initialize the IPv4 flow key or along the path
to the FIB core.

In preparation for adding a DSCP selector to IPv4 and IPv6 FIB rules, we
need to make sure the entire DSCP value is present in the IPv4 flow key.
This patchset starts to unmask the upper DSCP bits in the various places
that invoke the core FIB lookup functions directly (patches #1-#7) and
in the input route path (patches #8-#12). Future patchsets will do the
same in the output route path.

No functional changes are expected as commit 1fa3314c ("ipv4:
Centralize TOS matching") moved the masking of the upper DSCP bits to
the core where 'flowi4_tos' is matched against the TOS selector.
====================

Link: https://patch.msgid.link/20240821125251.1571445-1-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Unmask the upper DSCP bits when performing source validation and routing
a packet using the same route from a previously processed packet (hint).
In the future, this will allow us to perform the FIB lookup that is
performed as part of source validation according to the full DSCP value.

No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-13-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Unmask the upper DSCP bits when performing source validation for
multicast packets during early demux. In the future, this will allow us
to perform the FIB lookup which is performed as part of source
validation according to the full DSCP value.

No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-12-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Align the ICMP code to other callers of ip_route_input() and pass the
full DS field. In the future this will allow us to perform a route
lookup according to the full DSCP value.

No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-11-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Unmask the upper DSCP bits when looking up an input route via the
RTM_GETROUTE netlink message so that in the future the lookup could be
performed according to the full DSCP value.

No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-10-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Unmask the upper DSCP bits in input route lookup so that in the future
the lookup could be performed according to the full DSCP value.

No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-9-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

As explained in commit 35ebf65e ("ipv4: Create and use
fib_compute_spec_dst() helper."), the function is used - for example -
to determine the source address for an ICMP reply. If we are responding
to a multicast or broadcast packet, the source address is set to the
source address that we would use if we were to send a packet to the
unicast source of the original packet. This address is determined by
performing a FIB lookup and using the preferred source address of the
resulting route.

Unmask the upper DSCP bits of the DS field of the packet that triggered
the reply so that in the future the FIB lookup could be performed
according to the full DSCP value.

No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-8-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Unmask the upper DSCP bits when calling ipmr_fib_lookup() so that in the
future it could perform the FIB lookup according to the full DSCP value.

Note that ipmr_fib_lookup() performs a FIB rule lookup (returning the
relevant routing table) and that IPv4 multicast FIB rules do not support
matching on TOS / DSCP. However, it is still worth unmasking the upper
DSCP bits in case support for DSCP matching is ever added.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-7-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In a similar fashion to the iptables rpfilter match, unmask the upper
DSCP bits of the DS field of the currently tested packet so that in the
future the FIB lookup could be performed according to the full DSCP
value.

No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-6-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The rpfilter match performs a reverse path filter test on a packet by
performing a FIB lookup with the source and destination addresses
swapped.

Unmask the upper DSCP bits of the DS field of the tested packet so that
in the future the FIB lookup could be performed according to the full
DSCP value.

No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-5-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The Record Route IP option records the addresses of the routers that
routed the packet. In the case of forwarded packets, the kernel performs
a route lookup via fib_lookup() and fills in the preferred source
address of the matched route.

Unmask the upper DSCP bits when performing the lookup so that in the
future the lookup could be performed according to the full DSCP value.

No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-4-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The NETLINK_FIB_LOOKUP netlink family can be used to perform a FIB
lookup according to user provided parameters and communicate the result
back to user space.

Unmask the upper DSCP bits of the user-provided DS field before invoking
the IPv4 FIB lookup API so that in the future the lookup could be
performed according to the full DSCP value.

No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-3-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The helper performs a FIB lookup according to the parameters in the
'params' argument, one of which is 'tos'. According to the test in
test_tc_neigh_fib.c, it seems that BPF programs are expected to
initialize the 'tos' field to the full 8 bit DS field from the IPv4
header.

Unmask the upper DSCP bits before invoking the IPv4 FIB lookup APIs so
that in the future the lookup could be performed according to the full
DSCP value.

No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-2-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Abhinav Jain says:

====================
Enhance network interface feature testing

This small series includes fixes for creation of veth pairs for
networkless kernels & adds tests for turning the different network
interface features on and off in selftests/net/netdevice.sh script.
Tested using vng and compiles for network as well as networkless kernel.

   # selftests: net: netdevice.sh
   # No valid network device found, creating veth pair
   # PASS: veth0: set interface up
   # PASS: veth0: set MAC address
   # XFAIL: veth0: set IP address unsupported for veth*
   # PASS: veth0: ethtool list features
   # PASS: veth0: Turned off feature: rx-checksumming
   # PASS: veth0: Turned on feature: rx-checksumming
   # PASS: veth0: Restore feature rx-checksumming to initial state on
   # Actual changes:
   # tx-checksum-ip-generic: off

   ...

   # PASS: veth0: Turned on feature: rx-udp-gro-forwarding
   # PASS: veth0: Restore feature rx-udp-gro-forwarding to initial state off
   # Cannot get register dump: Operation not supported
   # XFAIL: veth0: ethtool dump not supported
   # PASS: veth0: ethtool stats
   # PASS: veth0: stop interface
====================

Link: https://patch.msgid.link/20240821171903.118324-1-jain.abhinav177@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Check if veth pair was created and if yes, xfail on setting IP address
logging an informational message.
Use XFAIL instead of SKIP for unsupported ethtool APIs.
Signed-off-by: Abhinav Jain <jain.abhinav177@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240821171903.118324-4-jain.abhinav177@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Implement on/off testing for all non-fixed features via while loop.
Signed-off-by: Abhinav Jain <jain.abhinav177@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240821171903.118324-3-jain.abhinav177@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Check if the netdev list is empty and create veth pair to be used for
feature on/off testing.
Remove the veth pair after testing is complete.
Signed-off-by: Abhinav Jain <jain.abhinav177@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240821171903.118324-2-jain.abhinav177@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

W=1 builds with GCC 14.2.0 warn that:

.../aq_ethtool.c:278:59: warning: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 6 [-Wformat-truncation=]
  278 |                                 snprintf(tc_string, 8, "TC%d ", tc);
      |                                                           ^~
.../aq_ethtool.c:278:56: note: directive argument in the range [-2147483641, 254]
  278 |                                 snprintf(tc_string, 8, "TC%d ", tc);
      |                                                        ^~~~~~~
.../aq_ethtool.c:278:33: note: ‘snprintf’ output between 5 and 15 bytes into a destination of size 8
  278 |                                 snprintf(tc_string, 8, "TC%d ", tc);
      |                                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

tc is always in the range 0 - cfg->tcs. And as cfg->tcs is a u8,
the range is 0 - 255. Further, on inspecting the code, it seems
that cfg->tcs will never be more than AQ_CFG_TCS_MAX (8), so
the range is actually 0 - 8.

So, it seems that the condition that GCC flags will not occur.
But, nonetheless, it would be nice if it didn't emit the warning.

It seems that this can be achieved by changing the format specifier
from %d to %u, in which case I believe GCC recognises an upper bound
on the range of tc of 0 - 255. After some experimentation I think
this is due to the combination of the use of %u and the type of
cfg->tcs (u8).

Empirically, updating the type of the tc variable to unsigned int
has the same effect.

As both of these changes seem to make sense in relation to what the code
is actually doing - iterating over unsigned values - do both.

Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240821-atlantic-str-v1-1-fa2cfe38ca00@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth and netfilter.

  Current release - regressions:

   - virtio_net: avoid crash on resume - move netdev_tx_reset_queue()
     call before RX napi enable

  Current release - new code bugs:

   - net/mlx5e: fix page leak and incorrect header release w/ HW GRO

  Previous releases - regressions:

   - udp: fix receiving fraglist GSO packets

   - tcp: prevent refcount underflow due to concurrent execution of
     tcp_sk_exit_batch()

  Previous releases - always broken:

   - ipv6: fix possible UAF when incrementing error counters on output

   - ip6: tunnel: prevent merging of packets with different L2

   - mptcp: pm: fix IDs not being reusable

   - bonding: fix potential crashes in IPsec offload handling

   - Bluetooth: HCI:
      - MGMT: add error handling to pair_device() to avoid a crash
      - invert LE State quirk to be opt-out rather then opt-in
      - fix LE quote calculation

   - drv: dsa: VLAN fixes for Ocelot driver

   - drv: igb: cope with large MAX_SKB_FRAGS Kconfig settings

   - drv: ice: fi Rx data path on architectures with PAGE_SIZE >= 8192

  Misc:

   - netpoll: do not export netpoll_poll_[disable|enable]()

   - MAINTAINERS: update the list of networking headers"

* tag 'net-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits)
  s390/iucv: Fix vargs handling in iucv_alloc_device()
  net: ovs: fix ovs_drop_reasons error
  net: xilinx: axienet: Fix dangling multicast addresses
  net: xilinx: axienet: Always disable promiscuous mode
  MAINTAINERS: Mark JME Network Driver as Odd Fixes
  MAINTAINERS: Add header files to NETWORKING sections
  MAINTAINERS: Add limited globs for Networking headers
  MAINTAINERS: Add net_tstamp.h to SOCKET TIMESTAMPING section
  MAINTAINERS: Add sonet.h to ATM section of MAINTAINERS
  octeontx2-af: Fix CPT AF register offset calculation
  net: phy: realtek: Fix setting of PHY LEDs Mode B bit on RTL8211F
  net: ngbe: Fix phy mode set to external phy
  netfilter: flowtable: validate vlan header
  bnxt_en: Fix double DMA unmapping for XDP_REDIRECT
  ipv6: prevent possible UAF in ip6_xmit()
  ipv6: fix possible UAF in ip6_finish_output2()
  ipv6: prevent UAF in ip6_send_skb()
  netpoll: do not export netpoll_poll_[disable|enable]()
  selftests: mlxsw: ethtool_lanes: Source ethtool lib from correct path
  udp: fix receiving fraglist GSO packets
  ...

Merge tag 'kbuild-fixes-v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Eliminate the fdtoverlay command duplication in scripts/Makefile.lib

 - Fix 'make compile_commands.json' for external modules

 - Ensure scripts/kconfig/merge_config.sh handles missing newlines

 - Fix some build errors on macOS

* tag 'kbuild-fixes-v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: fix typos "prequisites" to "prerequisites"
  Documentation/llvm: turn make command for ccache into code block
  kbuild: avoid scripts/kallsyms parsing /dev/null
  treewide: remove unnecessary <linux/version.h> inclusion
  scripts: kconfig: merge_config: config files: add a trailing newline
  Makefile: add $(srctree) to dependency of compile_commands.json target
  kbuild: clean up code duplication in cmd_fdtoverlay

iucv_alloc_device() gets a format string and a varying number of
arguments. This is incorrectly forwarded by calling dev_set_name() with
the format string and a va_list, while dev_set_name() expects also a
varying number of arguments.

Symptoms:
Corrupted iucv device names, which can result in log messages like:
sysfs: cannot create duplicate filename '/devices/iucv/hvc_iucv1827699952'

Fixes: 4452e8ef ("s390/iucv: Provide iucv_alloc_device() / iucv_release_device()")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1228425Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20240821091337.3627068-1-wintera@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There is something wrong with ovs_drop_reasons. ovs_drop_reasons[0] is
"OVS_DROP_LAST_ACTION", but OVS_DROP_LAST_ACTION == __OVS_DROP_REASON + 1,
which means that ovs_drop_reasons[1] should be "OVS_DROP_LAST_ACTION".

And as Adrian tested, without the patch, adding flow to drop packets
results in:

drop at: do_execute_actions+0x197/0xb20 [openvsw (0xffffffffc0db6f97)
origin: software
input port ifindex: 8
timestamp: Tue Aug 20 10:19:17 2024 859853461 nsec
protocol: 0x800
length: 98
original length: 98
drop reason: OVS_DROP_ACTION_ERROR

With the patch, the same results in:

drop at: do_execute_actions+0x197/0xb20 [openvsw (0xffffffffc0db6f97)
origin: software
input port ifindex: 8
timestamp: Tue Aug 20 10:16:13 2024 475856608 nsec
protocol: 0x800
length: 98
original length: 98
drop reason: OVS_DROP_LAST_ACTION

Fix this by initializing ovs_drop_reasons with index.

Fixes: 9d802da4 ("net: openvswitch: add last-action drop reason")
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Tested-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Adrian Moreno <amorenoz@redhat.com>
Link: https://patch.msgid.link/20240821123252.186305-1-dongml2@chinatelecom.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

Patch #1 disable BH when collecting stats via hardware offload to ensure
         concurrent updates from packet path do not result in losing stats.
         From Sebastian Andrzej Siewior.

Patch #2 uses write seqcount to reset counters serialize against reader.
         Also from Sebastian Andrzej Siewior.

Patch #3 ensures vlan header is in place before accessing its fields,
         according to KMSAN splat triggered by syzbot.

* tag 'nf-24-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: flowtable: validate vlan header
  netfilter: nft_counter: Synchronize nft_counter_reset() against reader.
  netfilter: nft_counter: Disable BH in nft_counter_offload_stats().
====================

Link: https://patch.msgid.link/20240822101842.4234-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Sean Anderson says:

====================
net: xilinx: axienet: Multicast fixes and improvements [part]
====================

First two patches of the series which are fixes.

Link: https://patch.msgid.link/20240822154059.1066595-1-sean.anderson@linux.devSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If a multicast address is removed but there are still some multicast
addresses, that address would remain programmed into the frame filter.
Fix this by explicitly setting the enable bit for each filter.

Fixes: 8a3b7a25 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822154059.1066595-3-sean.anderson@linux.devSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If promiscuous mode is disabled when there are fewer than four multicast
addresses, then it will not be reflected in the hardware. Fix this by
always clearing the promiscuous mode flag even when we program multicast
addresses.

Fixes: 8a3b7a25 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822154059.1066595-2-sean.anderson@linux.devSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This typo in scripts/Makefile.build has been present for more than 20
years. It was accidentally copy-pasted to other scripts/Makefile.* files.
Fix them all.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>

Simon Horman says:

====================
MAINTAINERS: Networking updates

This series includes Networking-related updates to MAINTAINERS.

* Patches 1-4 aim to assign header files with "*net*' and '*skbuff*'
  in their name to Networking-related sections within Maintainers.

  There are a few such files left over after this patches.
  I have to sent separate patches to add them to SCSI SUBSYSTEM
  and NETWORKING DRIVERS (WIRELESS) sections [1][2].

  [1] https://lore.kernel.org/linux-scsi/20240816-scsi-mnt-v1-1-439af8b1c28b@kernel.org/
  [2] https://lore.kernel.org/linux-wireless/20240816-wifi-mnt-v1-1-3fb3bf5d44aa@kernel.org/

* Patch 5 updates the status of the JME driver to 'Odd Fixes'
====================

Link: https://patch.msgid.link/20240821-net-mnt-v2-0-59a5af38e69d@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

This driver only appears to have received sporadic clean-ups, typically
part of some tree-wide activity, and fixes for quite some time.  And
according to the maintainer, Guo-Fu Tseng, the device has been EOLed for
a long time (see Link).

Accordingly, it seems appropriate to mark this driver as odd fixes.

Cc: Moon Yeounsu <yyyynoom@gmail.com>
Cc: Guo-Fu Tseng <cooldavid@cooldavid.org>
Link: https://lore.kernel.org/netdev/20240805003139.M94125@cooldavid.org/Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This is part of an effort to assign a section in MAINTAINERS to header
files that relate to Networking. In this case the files with "net" or
"skbuff" in their name.

This patch adds a number of such files to the NETWORKING DRIVERS
and NETWORKING [GENERAL] sections.
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This aims to add limited globs to improve the coverage of header files
in the NETWORKING DRIVERS and NETWORKING [GENERAL] sections.

It is done so in a minimal way to exclude overlap with other sections.
And so as not to require "X" entries to exclude files otherwise
matched by these new globs.

While imperfect, due to it's limited nature, this does extend coverage
of header files by these sections. And aims to automatically cover
new files that seem very likely belong to these sections.

The include/linux/netdev* glob (both sections)
+ Subsumes the entries for:
  - include/linux/netdevice.h
+ Extends the sections to cover
  - include/linux/netdevice_xmit.h
  - include/linux/netdev_features.h

The include/uapi/linux/netdev* globs: (both sections)
+ Subsumes the entries for:
  - include/linux/netdevice.h
+ Extends the sections to cover
  - include/linux/netdev.h

The include/linux/skbuff* glob (NETWORKING [GENERAL] section only):
+ Subsumes the entry for:
  - include/linux/skbuff.h
+ Extends the section to cover
  - include/linux/skbuff_ref.h

A include/uapi/linux/net_* glob was not added to the NETWORKING [GENERAL]
section. Although it would subsume the entry for
include/uapi/linux/net_namespace.h, which is fine, it would also extend
coverage to:
- include/uapi/linux/net_dropmon.h, which belongs to the
   NETWORK DROP MONITOR section
- include/uapi/linux/net_tstamp.h which, as per an earlier patch in this
  series, belongs to the SOCKET TIMESTAMPING section
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This is part of an effort to assign a section in MAINTAINERS to header
files that relate to Networking. In this case the files with "net" in
their name.

Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This is part of an effort to assign a section in MAINTAINERS to header
files that relate to Networking. In this case the files with "net" in
their name.

It seems that sonet.h is included in ATM related source files,
and thus that ATM is the most relevant section for these files.

Cc: Chas Williams <3chas3@gmail.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Let the kememdup_array() take care about multiplication and possible
overflows.
Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240821081447.12430-1-yujiaoliang@vivo.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

GDM1 port on EN7581 SoC is connected to the lan dsa switch.
GDM{2,3,4} can be used as wan port connected to an external
phy module. Configure hw mac address registers according to the port id.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20240821-airoha-eth-wan-mac-addr-v2-1-8706d0cd6cd5@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Some CPT AF registers are per LF and others are global. Translation
of PF/VF local LF slot number to actual LF slot number is required
only for accessing perf LF registers. CPT AF global registers access
do not require any LF slot number. Also, there is no reason CPT
PF/VF to know actual lf's register offset.

Without this fix microcode loading will fail, VFs cannot be created
and hardware is not usable.

Fixes: bc35e28a ("octeontx2-af: replace cpt slot with lf id on reg write")
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240821070558.1020101-1-bbhushan2@marvell.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>