- 28 Mar, 2018 40 commits
-
-
Kan Liang authored
commit 31766094 upstream. There is no event extension (bit 21) for SKX UPI, so use 'event' instead of 'event_ext'. Reported-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
Kan Liang <kan.liang@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: cd34cd97 ("perf/x86/intel/uncore: Add Skylake server uncore support") Link: http://lkml.kernel.org/r/1520004150-4855-1-git-send-email-kan.liang@linux.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andy Lutomirski authored
commit d8ba61ba upstream. There's nothing IST-worthy about #BP/int3. We don't allow kprobes in the small handful of places in the kernel that run at CPL0 with an invalid stack, and 32-bit kernels have used normal interrupt gates for #BP forever. Furthermore, we don't allow kprobes in places that have usergs while in kernel mode, so "paranoid" is also unnecessary. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by:
-
H.J. Lu authored
commit c55b8550 upstream. Since the x86-64 kernel must be aligned to 2MB, refuse to boot the kernel if the alignment of the LOAD segment isn't a multiple of 2MB. Signed-off-by:
H.J. Lu <hjl.tools@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/CAMe9rOrR7xSJgUfiCoZLuqWUwymRxXPoGBW38%2BpN%3D9g%2ByKNhZw@mail.gmail.comSigned-off-by:
-
H.J. Lu authored
commit e3d03598 upstream. Binutils 2.31 will enable -z separate-code by default for x86 to avoid mixing code pages with data to improve cache performance as well as security. To reduce x86-64 executable and shared object sizes, the maximum page size is reduced from 2MB to 4KB. But x86-64 kernel must be aligned to 2MB. Pass -z max-page-size=0x200000 to linker to force 2MB page size regardless of the default page size used by linker. Tested with Linux kernel 4.15.6 on x86-64. Signed-off-by:
-
Linus Torvalds authored
commit 32d43cd3 upstream. The undocumented 'icebp' instruction (aka 'int1') works pretty much like 'int3' in the absense of in-circuit probing equipment (except, obviously, that it raises #DB instead of raising #BP), and is used by some validation test-suites as such. But Andy Lutomirski noticed that his test suite acted differently in kvm than on bare hardware. The reason is that kvm used an inexact test for the icebp instruction: it just assumed that an all-zero VM exit qualification value meant that the VM exit was due to icebp. That is not unlike the guess that do_debug() does for the actual exception handling case, but it's purely a heuristic, not an absolute rule. do_debug() does it because it wants to ascribe _some_ reasons to the #DB that happened, and an empty %dr6 value means that 'icebp' is the most likely casue and we have no better information. But kvm can just do it right, because unlike the do_debug() case, kvm actually sees the real reason for the #DB in the VM-exit interruption information field. So instead of relying on an inexact heuristic, just use the actual VM exit information that says "it was 'icebp'". Right now the 'icebp' instruction isn't technically documented by Intel, but that will hopefully change. The special "privileged software exception" information _is_ actually mentioned in the Intel SDM, even though the cause of it isn't enumerated. Reported-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Andy Lutomirski authored
commit 4b0b37d4 upstream. glibc keeps getting cleverer, and my version now turns raise() into more than one syscall. Since the test relies on ptrace seeing an exact set of syscalls, this breaks the test. Replace raise(SIGSTOP) with syscall(SYS_tgkill, ...) to force glibc to get out of our way. Signed-off-by:
-
Linus Torvalds authored
commit f1869a89 upstream. Tabs on a console with long lines do not wrap properly, so correctly account for the line length when computing the tab placement location. Reported-by:
James Holderness <j4_james@hotmail.com> Signed-off-by:
-
Andri Yngvason authored
commit 9ffd7503 upstream. This fixes use after free introduced by the last cc770 patch. Signed-off-by:
Andri Yngvason <andri.yngvason@marel.com> Fixes: 74620123 ("can: cc770: Fix queue stall & dropped RTR reply") Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Andri Yngvason authored
commit 74620123 upstream. While waiting for the TX object to send an RTR, an external message with a matching id can overwrite the TX data. In this case we must call the rx routine and then try transmitting the message that was overwritten again. The queue was being stalled because the RX event did not generate an interrupt to wake up the queue again and the TX event did not happen because the TXRQST flag is reset by the chip when new data is received. According to the CC770 datasheet the id of a message object should not be changed while the MSGVAL bit is set. This has been fixed by resetting the MSGVAL bit before modifying the object in the transmit function and setting it after. It is not enough to set & reset CPUUPD. It is important to keep the MSGVAL bit reset while the message object is being modified. Otherwise, during RTR transmission, a frame with matching id could trigger an rx-interrupt, which would cause a race condition between the interrupt routine and the transmit function. Signed-off-by:
Richard Weinberger <richard@nod.at> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
-
Andri Yngvason authored
commit f4353daf upstream. This has been reported to cause stalls on rt-linux. Suggested-by:
-
Marek Vasut authored
commit 591d65d5 upstream. Older versions of the core are not compatible with the driver due to various intrusive fixes of the core. Read out the VER register, check the core revision bitfield and verify if the core in use is new enough (rev 2.1 or newer) to work correctly with this driver. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Markus Marb <markus@marb.org> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
-
Marek Vasut authored
commit 880dd464 upstream. The new version of the IFI CANFD core has significantly less complex error state indication logic. In particular, the warning/error state bits are no longer all over the place, but are all present in the STATUS register. Moreover, there is a new IRQ register bit indicating transition between error states (active/warning/passive/busoff). This patch makes use of this bit to weed out the obscure selective INTERRUPT register clearing, which was used to carry over the error state indication into the poll function. While at it, this patch fixes the handling of the ACTIVE state, since the hardware provides indication of the core being in ACTIVE state and that in turn fixes the state transition indication toward userspace. Finally, register reads in the poll function are moved to the matching subfunctions since those are also no longer needed in the poll function. Signed-off-by:
-
Dan Carpenter authored
commit 4c41aa24 upstream. If the server is malicious then *bytes_read could be larger than the size of the "target" buffer. It would lead to memory corruption when we do the memcpy(). Reported-by:
Dr Silvio Cesare of InfoSect <Silvio Cesare <silvio.cesare@gmail.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Jagdish Gediya authored
commit 6b00c351 upstream. Due to missing information in Hardware manual, current implementation doesn't read ECCSTAT0 and ECCSTAT1 registers for IFC 2.0. Add support to read ECCSTAT0 and ECCSTAT1 registers during ecccheck for IFC 2.0. Fixes: 65644147 ("mtd: nand: ifc: Fix location of eccstat registers for IFC V1.0") Cc: stable@vger.kernel.org # v3.18+ Signed-off-by:
Jagdish Gediya <jagdish.gediya@nxp.com> Reviewed-by:
Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
-
Jagdish Gediya authored
commit 843c3a59 upstream. Number of ECC status registers i.e. (ECCSTATx) has been increased in IFC version 2.0.0 due to increase in SRAM size. This is causing eccstat array to over flow. So, replace eccstat array with u32 variable to make it fail-safe and independent of number of ECC status registers or SRAM size. Fixes: bccb06c3 ("mtd: nand: ifc: update bufnum mask for ver >= 2.0.0") Cc: stable@vger.kernel.org # 3.18+ Signed-off-by:
-
Jagdish Gediya authored
commit fa8e6d58 upstream. As per the IFC hardware manual, Most significant 2 bytes in nand_fsr register are the outcome of NAND READ STATUS command. So status value need to be shifted and aligned as per the nand framework requirement. Fixes: 82771882 ("NAND Machine support for Integrated Flash Controller") Cc: stable@vger.kernel.org # v3.18+ Signed-off-by:
-
OuYang ZhiZhong authored
commit 6de56493 upstream. Section was not properly computed. The value of OOB region definition is always ECC section 0 information in the OOB area, but we want to get all the ECC bytes information, so we should call mtd_ooblayout_ecc(mtd, section++, &oobregion) until it returns -ERANGE. Fixes: c2b78452 ("mtd: use mtd_ooblayout_xxx() helpers where appropriate") Cc: <stable@vger.kernel.org> Signed-off-by:
OuYang ZhiZhong <ouyzz@yealink.com> Signed-off-by:
-
Masami Hiramatsu authored
commit c5d343b6 upstream. In Documentation/trace/kprobetrace.txt, it says @SYM[+|-offs] : Fetch memory at SYM +|- offs (SYM should be a data symbol) However, the parser doesn't parse minus offset correctly, since commit 2fba0c88 ("tracing/kprobes: Fix probe offset to be unsigned") drops minus ("-") offset support for kprobe probe address usage. This fixes the traceprobe_split_symbol_offset() to parse minus offset again with checking the offset range, and add a minus offset check in kprobe probe address usage. Link: http://lkml.kernel.org/r/152129028983.31874.13419301530285775521.stgit@devbox Cc: Ingo Molnar <mingo@redhat.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Fixes: 2fba0c88 ("tracing/kprobes: Fix probe offset to be unsigned") Acked-by:
Namhyung Kim <namhyung@kernel.org> Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Larry Finger authored
commit 78dc897b upstream. In commit c713fb07 ("rtlwifi: rtl8821ae: Fix connection lost problem correctly") a problem in rtl8821ae that caused loss of signal was fixed. That same problem has now been reported for rtl8723be. Accordingly, the ASPM L1 latency has been increased from 0 to 7 to fix the instability. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Tested-by:
James Cameron <quozl@laptop.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Arend Van Spriel authored
commit 455f3e76 upstream. The firmware has a requirement that the P2P_DEVICE address should be different from the address of the primary interface. When not specified by user-space, the driver generates the MAC address for the P2P_DEVICE interface using the MAC address of the primary interface and setting the locally administered bit. However, the MAC address of the primary interface may already have that bit set causing the creation of the P2P_DEVICE interface to fail with -EBUSY. Fix this by using a random address instead to determine the P2P_DEVICE address. Cc: stable@vger.kernel.org # 3.10.y Reported-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by:
Franky Lin <franky.lin@broadcom.com> Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
-
Vishal Verma authored
commit 3ffb0ba9 upstream. Prior to 25520d55 ("block: Inline blk_integrity in struct gendisk") we needed to temporarily add a zero-capacity disk before registering for blk-integrity. But adding a zero-capacity disk caused the partition table scanning to bail early, and this resulted in partitions not coming up after a probe of the BTT or blk namespaces. We can now register for integrity before the disk has been added, and this fixes the rescan problems. Fixes: 25520d55 ("block: Inline blk_integrity in struct gendisk") Reported-by:
Dariusz Dokupil <dariusz.dokupil@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Vishal Verma <vishal.l.verma@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Takashi Iwai authored
commit b1abf6fc upstream. The resource allocation in WDAT watchdog has off-one-by error, it sets one byte more than the actual end address. This may eventually lead to unexpected resource conflicts. Fixes: 058dfc76 (ACPI / watchdog: Add support for WDAT hardware watchdog) Cc: 4.9+ <stable@vger.kernel.org> # 4.9+ Signed-off-by:
Takashi Iwai <tiwai@suse.de> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Dan Williams authored
commit dc9e0a93 upstream. Commit 99759869 "acpi: Add acpi_map_pxm_to_online_node()" added support for mapping a given proximity to its nearest, by SLIT distance, online node. However, it sometimes returns unexpected results due to the fact that it switches from comparing the PXM node to the last node that was closer than the current max. for_each_online_node(n) { dist = node_distance(node, n); if (dist < min_dist) { min_dist = dist; node = n; <---- from this point we're using the wrong node for node_distance() Fixes: 99759869 ("acpi: Add acpi_map_pxm_to_online_node()") Cc: <stable@vger.kernel.org> Reviewed-by:
Toshi Kani <toshi.kani@hp.com> Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>> Signed-off-by:
-
Greg Kroah-Hartman authored
commit 3b82a4db upstream. The memmap options sent to the udl framebuffer driver were not being checked for all sets of possible crazy values. Fix this up by properly bounding the allowed values. Reported-by:
Eyal Itkin <eyalit@checkpoint.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180321154553.GA18454@kroah.comSigned-off-by:
-
Michel Dänzer authored
commit 2681bc79 upstream. Turning off the sink in this case causes various issues, because userspace expects it to stay on until it turns it off explicitly. Instead, turn the sink off and back on when a display is connected again. This dance seems necessary for link training to work correctly. Bugzilla: https://bugs.freedesktop.org/105308 Cc: stable@vger.kernel.org Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Thomas Hellstrom authored
commit 73a88250 upstream. When validating legacy surfaces, the backup bo might be destroyed at surface validate time. However, the kms resource validation code may have the bo reserved, so we will destroy a locked mutex. While there shouldn't be any other users of that mutex when it is destroyed, it causes a lock leak and thus throws a lockdep error. Fix this by having the kms resource validation code hold a reference to the bo while we have it reserved. We do this by introducing a validation context which might come in handy when the kms code is extended to validate multiple resources or buffers. Cc: <stable@vger.kernel.org> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Brian Paul <brianp@vmware.com> Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
-
Kirill A. Shutemov authored
commit b3cd54b2 upstream. shmem_unused_huge_shrink() gets called from reclaim path. Waiting for page lock may lead to deadlock there. There was a bug report that may be attributed to this: http://lkml.kernel.org/r/alpine.LRH.2.11.1801242349220.30642@mail.ewheeler.net Replace lock_page() with trylock_page() and skip the page if we failed to lock it. We will get to the page on the next scan. We can test for the PageTransHuge() outside the page lock as we only need protection against splitting the page under us. Holding pin oni the page is enough for this. Link: http://lkml.kernel.org/r/20180316210830.43738-1-kirill.shutemov@linux.intel.com Fixes: 779750d2 ("shmem: split huge pages beyond i_size under memory pressure") Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by:
Eric Wheeler <linux-mm@lists.ewheeler.net> Acked-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by:
-
Kirill A. Shutemov authored
commit fa41b900 upstream. deferred_split_scan() gets called from reclaim path. Waiting for page lock may lead to deadlock there. Replace lock_page() with trylock_page() and skip the page if we failed to lock it. We will get to the page on the next scan. Link: http://lkml.kernel.org/r/20180315150747.31945-1-kirill.shutemov@linux.intel.com Fixes: 9a982250 ("thp: introduce deferred_split_huge_page()") Signed-off-by:
-
Kirill A. Shutemov authored
commit fece2029 upstream. khugepaged is not yet able to convert PTE-mapped huge pages back to PMD mapped. We do not collapse such pages. See check khugepaged_scan_pmd(). But if between khugepaged_scan_pmd() and __collapse_huge_page_isolate() somebody managed to instantiate THP in the range and then split the PMD back to PTEs we would have a problem -- VM_BUG_ON_PAGE(PageCompound(page)) will get triggered. It's possible since we drop mmap_sem during collapse to re-take for write. Replace the VM_BUG_ON() with graceful collapse fail. Link: http://lkml.kernel.org/r/20180315152353.27989-1-kirill.shutemov@linux.intel.com Fixes: b1caa957 ("khugepaged: ignore pmd tables with THP mapped with ptes") Signed-off-by:
-
Toshi Kani authored
commit 28ee90fe upstream. Implement pud_free_pmd_page() and pmd_free_pte_page() on x86, which clear a given pud/pmd entry and free up lower level page table(s). The address range associated with the pud/pmd entry must have been purged by INVLPG. Link: http://lkml.kernel.org/r/20180314180155.19492-3-toshi.kani@hpe.com Fixes: e61ce6ad ("mm: change ioremap to set up huge I/O mappings") Signed-off-by:
Toshi Kani <toshi.kani@hpe.com> Reported-by:
Lei Li <lious.lilei@hisilicon.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Toshi Kani authored
commit b6bdb751 upstream. On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may create pud/pmd mappings. A kernel panic was observed on arm64 systems with Cortex-A75 in the following steps as described by Hanjun Guo. 1. ioremap a 4K size, valid page table will build, 2. iounmap it, pte0 will set to 0; 3. ioremap the same address with 2M size, pgd/pmd is unchanged, then set the a new value for pmd; 4. pte0 is leaked; 5. CPU may meet exception because the old pmd is still in TLB, which will lead to kernel panic. This panic is not reproducible on x86. INVLPG, called from iounmap, purges all levels of entries associated with purged address on x86. x86 still has memory leak. The patch changes the ioremap path to free unmapped page table(s) since doing so in the unmap path has the following issues: - The iounmap() path is shared with vunmap(). Since vmap() only supports pte mappings, making vunmap() to free a pte page is an overhead for regular vmap users as they do not need a pte page freed up. - Checking if all entries in a pte page are cleared in the unmap path is racy, and serializing this check is expensive. - The unmap path calls free_vmap_area_noflush() to do lazy TLB purges. Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB purge. Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which clear a given pud/pmd entry and free up a page for the lower level entries. This patch implements their stub functions on x86 and arm64, which work as workaround. [akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub] Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com Fixes: e61ce6ad ("mm: change ioremap to set up huge I/O mappings") Reported-by:
-
Jeff Layton authored
commit 68ef3bc3 upstream. We had some reports of panics in nfsd4_lm_notify, and that showed a nfs4_lockowner that had outlived its so_client. Ensure that we walk any leftover lockowners after tearing down all of the stateids, and remove any blocked locks that they hold. With this change, we also don't need to walk the nbl_lru on nfsd_net shutdown, as that will happen naturally when we tear down the clients. Fixes: 76d348fa (nfsd: have nfsd4_lock use blocking locks for v4.1+ locks) Reported-by:
Frank Sorenson <fsorenso@redhat.com> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Cc: stable@vger.kernel.org # 4.9 Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Hans de Goede authored
commit d418ff56 upstream. When commit 9c7be59f ("libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs") was added it inherited the ATA_HORKAGE_NO_NCQ_TRIM quirk from the existing "Crucial_CT*MX100*" entry, but that entry sets model_rev to "MU01", where as the entry adding the NOLPM quirk sets it to NULL. This means that after this commit we no apply the NO_NCQ_TRIM quirk to all "Crucial_CT512MX100*" SSDs even if they have the fixed "MU02" firmware. This commit splits the "Crucial_CT512MX100*" quirk into 2 quirks, one for the "MU01" firmware and one for all other firmware versions, so that we once again only apply the NO_NCQ_TRIM quirk to the "MU01" firmware version. Fixes: 9c7be59f ("libata: Apply NOLPM quirk to ... MX100 512GB SSDs") Cc: stable@vger.kernel.org Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Hans de Goede authored
commit 3bf7b5d6 upstream. Commit b17e5729 ("libata: disable LPM for Crucial BX100 SSD 500GB drive"), introduced a ATA_HORKAGE_NOLPM quirk for Crucial BX100 500GB SSDs but limited this to the MU02 firmware version, according to: http://www.crucial.com/usa/en/support-ssd-firmware MU02 is the last version, so there are no newer possibly fixed versions and if the MU02 version has broken LPM then the MU01 almost certainly also has broken LPM, so this commit changes the quirk to apply to all firmware versions. Fixes: b17e5729 ("libata: disable LPM for Crucial BX100 SSD 500GB...") Cc: stable@vger.kernel.org Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Hans de Goede authored
commit 62ac3f73 upstream. There have been reports of the Crucial M500 480GB model not working with LPM set to min_power / med_power_with_dipm level. It has not been tested with medium_power, but that typically has no measurable power-savings. Note the reporters Crucial_CT480M500SSD3 has a firmware version of MU03 and there is a MU05 update available, but that update does not mention any LPM fixes in its changelog, so the quirk matches all firmware versions. In my experience the LPM problems with (older) Crucial SSDs seem to be limited to higher capacity versions of the SSDs (different firmware?), so this commit adds a NOLPM quirk for the 480 and 960GB versions of the M500, to avoid LPM causing issues with these SSDs. Cc: stable@vger.kernel.org Reported-and-tested-by:
Martin Steigerwald <martin@lichtvoll.de> Signed-off-by:
-
Ju Hyung Park authored
commit ca6bfcb2 upstream. Samsung explicitly states that queued TRIM is supported for Linux with 860 PRO and 860 EVO. Make the previous blacklist to cover only 840 and 850 series. Signed-off-by:
Park Ju Hyung <qkrwngud825@gmail.com> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Kai-Heng Feng authored
commit b17e5729 upstream. After Laptop Mode Tools starts to use min_power for LPM, a user found out Crucial BX100 SSD can't get mounted. Crucial BX100 SSD 500GB drive don't work well with min_power. This also happens to med_power_with_dipm. So let's disable LPM for Crucial BX100 SSD 500GB drive. BugLink: https://bugs.launchpad.net/bugs/1726930Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Hans de Goede authored
commit 9c7be59f upstream. Various people have reported the Crucial MX100 512GB model not working with LPM set to min_power. I've now received a report that it also does not work with the new med_power_with_dipm level. It does work with medium_power, but that has no measurable power-savings and given the amount of people being bitten by the other levels not working, this commit just disables LPM altogether. Note all reporters of this have either the 512GB model (max capacity), or are not specifying their SSD's size. So for now this quirk assumes this is a problem with the 512GB model only. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=89261 Buglink: https://github.com/linrunner/TLP/issues/84 Cc: stable@vger.kernel.org Signed-off-by:
-
Eric Biggers authored
commit 2c1ec6fd upstream. syzkaller hit a WARN() in ata_bmdma_qc_issue() when writing to /dev/sg0. This happened because it issued an ATA pass-through command (ATA_16) where the protocol field indicated that NCQ should be used -- but the device did not support NCQ. We could just remove the WARN() from libata-sff.c, but the real problem seems to be that the SCSI -> ATA translation code passes through NCQ commands without verifying that the device actually supports NCQ. Fix this by adding the appropriate check to ata_scsi_pass_thru(). Here's reproducer that works in QEMU when /dev/sg0 refers to a disk of the default type ("82371SB PIIX3 IDE"): #include <fcntl.h> #include <unistd.h> int main() { char buf[53] = { 0 }; buf[36] = 0x85; /* ATA_16 */ buf[37] = (12 << 1); /* FPDMA */ buf[38] = 0x1; /* Has data */ buf[51] = 0xC8; /* ATA_CMD_READ */ write(open("/dev/sg0", O_RDWR), buf, sizeof(buf)); } Fixes: ee7fb331 ("libata: add support for NCQ commands for SG interface") Reported-by: syzbot+2f69ca28df61bdfc77cd36af2e789850355a221e@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Eric Biggers authored
commit 9173e5e8 upstream. syzkaller hit a WARN() in ata_qc_issue() when writing to /dev/sg0. This happened because it issued a READ_6 command with no data buffer. Just remove the WARN(), as it doesn't appear indicate a kernel bug. The expected behavior is to fail the command, which the code does. Here's a reproducer that works in QEMU when /dev/sg0 refers to a disk of the default type ("82371SB PIIX3 IDE"): #include <fcntl.h> #include <unistd.h> int main() { char buf[42] = { [36] = 0x8 /* READ_6 */ }; write(open("/dev/sg0", O_RDWR), buf, sizeof(buf)); } Fixes: f92a2636 ("libata: change ATA_QCFLAG_DMAMAP semantics") Reported-by: syzbot+f7b556d1766502a69d85071d2ff08bd87be53d0f@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> # v2.6.25+ Signed-off-by:
-
