- 26 Jan, 2019 28 commits
-
-
Chao Yu authored
commit 9dc956b2 upstream. This patch fixs to do sanity check with user_block_count. - Overview Divide zero in utilization when mount() a corrupted f2fs image - Reproduce (4.18 upstream kernel) - Kernel message [ 564.099503] F2FS-fs (loop0): invalid crc value [ 564.101991] divide error: 0000 [#1] SMP KASAN PTI [ 564.103103] CPU: 1 PID: 1298 Comm: f2fs_discard-7: Not tainted 4.18.0-rc1+ #4 [ 564.104584] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 564.106624] RIP: 0010:issue_discard_thread+0x248/0x5c0 [ 564.107692] Code: ff ff 48 8b bd e8 fe ff ff 41 8b 9d 4c 04 00 00 e8 cd b8 ad ff 41 8b 85 50 04 00 00 31 d2 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <48> f7 f3 83 f8 50 7e 16 41 c7 86 7c ff ff ff 01 00 00 00 41 c7 86 [ 564.111686] RSP: 0018:ffff8801f3117dc0 EFLAGS: 00010206 [ 564.112775] RAX: 0000000000000384 RBX: 0000000000000000 RCX: ffffffffb88c1e03 [ 564.114250] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff8801e3aa4850 [ 564.115706] RBP: ffff8801f3117f00 R08: 1ffffffff751a1d0 R09: fffffbfff751a1d0 [ 564.117177] R10: 0000000000000001 R11: fffffbfff751a1d0 R12: 00000000fffffffc [ 564.118634] R13: ffff8801e3aa4400 R14: ffff8801f3117ed8 R15: ffff8801e2050000 [ 564.120094] FS: 0000000000000000(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 564.121748] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 564.122923] CR2: 000000000202b078 CR3: 00000001f11ac000 CR4: 00000000000006e0 [ 564.124383] Call Trace: [ 564.124924] ? __issue_discard_cmd+0x480/0x480 [ 564.125882] ? __sched_text_start+0x8/0x8 [ 564.126756] ? __kthread_parkme+0xcb/0x100 [ 564.127620] ? kthread_blkcg+0x70/0x70 [ 564.128412] kthread+0x180/0x1d0 [ 564.129105] ? __issue_discard_cmd+0x480/0x480 [ 564.130029] ? kthread_associate_blkcg+0x150/0x150 [ 564.131033] ret_from_fork+0x35/0x40 [ 564.131794] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 564.141798] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 564.142773] RIP: 0010:issue_discard_thread+0x248/0x5c0 [ 564.143885] Code: ff ff 48 8b bd e8 fe ff ff 41 8b 9d 4c 04 00 00 e8 cd b8 ad ff 41 8b 85 50 04 00 00 31 d2 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <48> f7 f3 83 f8 50 7e 16 41 c7 86 7c ff ff ff 01 00 00 00 41 c7 86 [ 564.147776] RSP: 0018:ffff8801f3117dc0 EFLAGS: 00010206 [ 564.148856] RAX: 0000000000000384 RBX: 0000000000000000 RCX: ffffffffb88c1e03 [ 564.150424] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff8801e3aa4850 [ 564.151906] RBP: ffff8801f3117f00 R08: 1ffffffff751a1d0 R09: fffffbfff751a1d0 [ 564.153463] R10: 0000000000000001 R11: fffffbfff751a1d0 R12: 00000000fffffffc [ 564.154915] R13: ffff8801e3aa4400 R14: ffff8801f3117ed8 R15: ffff8801e2050000 [ 564.156405] FS: 0000000000000000(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 564.158070] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 564.159279] CR2: 000000000202b078 CR3: 00000001f11ac000 CR4: 00000000000006e0 [ 564.161043] ================================================================== [ 564.162587] BUG: KASAN: stack-out-of-bounds in from_kuid_munged+0x1d/0x50 [ 564.163994] Read of size 4 at addr ffff8801f3117c84 by task f2fs_discard-7:/1298 [ 564.165852] CPU: 1 PID: 1298 Comm: f2fs_discard-7: Tainted: G D 4.18.0-rc1+ #4 [ 564.167593] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 564.169522] Call Trace: [ 564.170057] dump_stack+0x7b/0xb5 [ 564.170778] print_address_description+0x70/0x290 [ 564.171765] kasan_report+0x291/0x390 [ 564.172540] ? from_kuid_munged+0x1d/0x50 [ 564.173408] __asan_load4+0x78/0x80 [ 564.174148] from_kuid_munged+0x1d/0x50 [ 564.174962] do_notify_parent+0x1f5/0x4f0 [ 564.175808] ? send_sigqueue+0x390/0x390 [ 564.176639] ? css_set_move_task+0x152/0x340 [ 564.184197] do_exit+0x1290/0x1390 [ 564.184950] ? __issue_discard_cmd+0x480/0x480 [ 564.185884] ? mm_update_next_owner+0x380/0x380 [ 564.186829] ? __sched_text_start+0x8/0x8 [ 564.187672] ? __kthread_parkme+0xcb/0x100 [ 564.188528] ? kthread_blkcg+0x70/0x70 [ 564.189333] ? kthread+0x180/0x1d0 [ 564.190052] ? __issue_discard_cmd+0x480/0x480 [ 564.190983] rewind_stack_do_exit+0x17/0x20 [ 564.192190] The buggy address belongs to the page: [ 564.193213] page:ffffea0007cc45c0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 564.194856] flags: 0x2ffff0000000000() [ 564.195644] raw: 02ffff0000000000 0000000000000000 dead000000000200 0000000000000000 [ 564.197247] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 564.198826] page dumped because: kasan: bad access detected [ 564.200299] Memory state around the buggy address: [ 564.201306] ffff8801f3117b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 564.202779] ffff8801f3117c00: 00 00 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 f3 [ 564.204252] >ffff8801f3117c80: f3 f3 f3 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 [ 564.205742] ^ [ 564.206424] ffff8801f3117d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 564.207908] ffff8801f3117d80: f3 f3 f3 f3 f3 f3 f3 f3 00 00 00 00 00 00 00 00 [ 564.209389] ================================================================== [ 564.231795] F2FS-fs (loop0): Mounted with checkpoint version = 2 - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L586 return div_u64((u64)valid_user_blocks(sbi) * 100, sbi->user_block_count); Missing checks on sbi->user_block_count. Reported-by:
Wen Xu <wen.xu@gatech.edu> Signed-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chao Yu authored
commit 42bf546c upstream. As Wen Xu reported in below link: https://bugzilla.kernel.org/show_bug.cgi?id=200183 - Overview Divide zero in reset_curseg() when mounting a crafted f2fs image - Reproduce - Kernel message [ 588.281510] divide error: 0000 [#1] SMP KASAN PTI [ 588.282701] CPU: 0 PID: 1293 Comm: mount Not tainted 4.18.0-rc1+ #4 [ 588.284000] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 588.286178] RIP: 0010:reset_curseg+0x94/0x1a0 [ 588.298166] RSP: 0018:ffff8801e88d7940 EFLAGS: 00010246 [ 588.299360] RAX: 0000000000000014 RBX: ffff8801e1d46d00 RCX: ffffffffb88bf60b [ 588.300809] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff8801e1d46d64 [ 588.305272] R13: 0000000000000000 R14: 0000000000000014 R15: 0000000000000000 [ 588.306822] FS: 00007fad85008840(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000 [ 588.308456] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 588.309623] CR2: 0000000001705078 CR3: 00000001f30f8000 CR4: 00000000000006f0 [ 588.311085] Call Trace: [ 588.311637] f2fs_build_segment_manager+0x103f/0x3410 [ 588.316136] ? f2fs_commit_super+0x1b0/0x1b0 [ 588.317031] ? set_blocksize+0x90/0x140 [ 588.319473] f2fs_mount+0x15/0x20 [ 588.320166] mount_fs+0x60/0x1a0 [ 588.320847] ? alloc_vfsmnt+0x309/0x360 [ 588.321647] vfs_kern_mount+0x6b/0x1a0 [ 588.322432] do_mount+0x34a/0x18c0 [ 588.323175] ? strndup_user+0x46/0x70 [ 588.323937] ? copy_mount_string+0x20/0x20 [ 588.324793] ? memcg_kmem_put_cache+0x1b/0xa0 [ 588.325702] ? kasan_check_write+0x14/0x20 [ 588.326562] ? _copy_from_user+0x6a/0x90 [ 588.327375] ? memdup_user+0x42/0x60 [ 588.328118] ksys_mount+0x83/0xd0 [ 588.328808] __x64_sys_mount+0x67/0x80 [ 588.329607] do_syscall_64+0x78/0x170 [ 588.330400] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 588.331461] RIP: 0033:0x7fad848e8b9a [ 588.336022] RSP: 002b:00007ffd7c5b6be8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 588.337547] RAX: ffffffffffffffda RBX: 00000000016f8030 RCX: 00007fad848e8b9a [ 588.338999] RDX: 00000000016f8210 RSI: 00000000016f9f30 RDI: 0000000001700ec0 [ 588.340442] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 588.341887] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001700ec0 [ 588.343341] R13: 00000000016f8210 R14: 0000000000000000 R15: 0000000000000003 [ 588.354891] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 588.355862] RIP: 0010:reset_curseg+0x94/0x1a0 [ 588.360742] RSP: 0018:ffff8801e88d7940 EFLAGS: 00010246 [ 588.361812] RAX: 0000000000000014 RBX: ffff8801e1d46d00 RCX: ffffffffb88bf60b [ 588.363485] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff8801e1d46d64 [ 588.365213] RBP: ffff8801e88d7968 R08: ffffed003c32266f R09: ffffed003c32266f [ 588.366661] R10: 0000000000000001 R11: ffffed003c32266e R12: ffff8801f0337700 [ 588.368110] R13: 0000000000000000 R14: 0000000000000014 R15: 0000000000000000 [ 588.370057] FS: 00007fad85008840(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000 [ 588.372099] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 588.373291] CR2: 0000000001705078 CR3: 00000001f30f8000 CR4: 00000000000006f0 - Location https://elixir.bootlin.com/linux/latest/source/fs/f2fs/segment.c#L2147 curseg->zone = GET_ZONE_FROM_SEG(sbi, curseg->segno); If secs_per_zone is corrupted due to fuzzing test, it will cause divide zero operation when using GET_ZONE_FROM_SEG macro, so we should do more sanity check with secs_per_zone during mount to avoid this issue. Signed-off-by:
-
Chao Yu authored
commit e1da7872 upstream. This patch introduces verify_blkaddr to check meta/data block address with valid range to detect bug earlier. In addition, once we encounter an invalid blkaddr, notice user to run fsck to fix, and let the kernel panic. Signed-off-by:
-
Chao Yu authored
commit 7b525dd0 upstream. - rename is_valid_blkaddr() to is_valid_meta_blkaddr() for readability. - introduce is_valid_blkaddr() for cleanup. No logic change in this patch. Signed-off-by:
-
Jaegeuk Kim authored
commit 0cfe75c5 upstream. In order to avoid the below overflow issue, we should have checked the boundaries in superblock before reaching out to allocation. As Linus suggested, the right place should be sanity_check_raw_super(). Dr Silvio Cesare of InfoSect reported: There are integer overflows with using the cp_payload superblock field in the f2fs filesystem potentially leading to memory corruption. include/linux/f2fs_fs.h struct f2fs_super_block { ... __le32 cp_payload; fs/f2fs/f2fs.h typedef u32 block_t; /* * should not change u32, since it is the on-disk block * address format, __le32. */ ... static inline block_t __cp_payload(struct f2fs_sb_info *sbi) { return le32_to_cpu(F2FS_RAW_SUPER(sbi)->cp_payload); } fs/f2fs/checkpoint.c block_t start_blk, orphan_blocks, i, j; ... start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi); orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi); +++ integer overflows ... unsigned int cp_blks = 1 + __cp_payload(sbi); ... sbi->ckpt = kzalloc(cp_blks * blk_size, GFP_KERNEL); +++ integer overflow leading to incorrect heap allocation. int cp_payload_blks = __cp_payload(sbi); ... ckpt->cp_pack_start_sum = cpu_to_le32(1 + cp_payload_blks + orphan_blocks); +++ sign bug and integer overflow ... for (i = 1; i < 1 + cp_payload_blks; i++) +++ integer overflow ... sbi->max_orphans = (sbi->blocks_per_seg - F2FS_CP_PACKS - NR_CURSEG_TYPE - __cp_payload(sbi)) * F2FS_ORPHANS_PER_BLOCK; +++ integer overflow Reported-by:
Greg KH <greg@kroah.com> Reported-by:
Silvio Cesare <silvio.cesare@gmail.com> Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by:
-
Jaegeuk Kim authored
commit b2ca374f upstream. syzbot hit the following crash on upstream commit 87ef1202 (Wed Apr 18 19:48:17 2018 +0000) Merge tag 'ceph-for-4.17-rc2' of git://github.com/ceph/ceph-client syzbot dashboard link: https://syzkaller.appspot.com/bug?extid=83699adeb2d13579c31e C reproducer: https://syzkaller.appspot.com/x/repro.c?id=5805208181407744 syzkaller reproducer: https://syzkaller.appspot.com/x/repro.syz?id=6005073343676416 Raw console output: https://syzkaller.appspot.com/x/log.txt?id=6555047731134464 Kernel config: https://syzkaller.appspot.com/x/.config?id=1808800213120130118 compiler: gcc (GCC) 8.0.1 20180413 (experimental) IMPORTANT: if you fix the bug, please add the following tag to the commit: Reported-by: syzbot+83699adeb2d13579c31e@syzkaller.appspotmail.com It will help syzbot understand when the bug is fixed. See footer for details. If you forward the report, please keep this part and the footer. F2FS-fs (loop0): Magic Mismatch, valid(0xf2f52010) - read(0x0) F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock F2FS-fs (loop0): invalid crc value BUG: unable to handle kernel paging request at ffffed006b2a50c0 PGD 21ffee067 P4D 21ffee067 PUD 21fbeb067 PMD 0 Oops: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 4514 Comm: syzkaller989480 Not tainted 4.17.0-rc1+ #8 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:build_sit_entries fs/f2fs/segment.c:3653 [inline] RIP: 0010:build_segment_manager+0x7ef7/0xbf70 fs/f2fs/segment.c:3852 RSP: 0018:ffff8801b102e5b0 EFLAGS: 00010a06 RAX: 1ffff1006b2a50c0 RBX: 0000000000000004 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8801ac74243e RBP: ffff8801b102f410 R08: ffff8801acbd46c0 R09: fffffbfff14d9af8 R10: fffffbfff14d9af8 R11: ffff8801acbd46c0 R12: ffff8801ac742a80 R13: ffff8801d9519100 R14: dffffc0000000000 R15: ffff880359528600 FS: 0000000001e04880(0000) GS:ffff8801dae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffed006b2a50c0 CR3: 00000001ac6ac000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: f2fs_fill_super+0x4095/0x7bf0 fs/f2fs/super.c:2803 mount_bdev+0x30c/0x3e0 fs/super.c:1165 f2fs_mount+0x34/0x40 fs/f2fs/super.c:3020 mount_fs+0xae/0x328 fs/super.c:1268 vfs_kern_mount.part.34+0xd4/0x4d0 fs/namespace.c:1037 vfs_kern_mount fs/namespace.c:1027 [inline] do_new_mount fs/namespace.c:2517 [inline] do_mount+0x564/0x3070 fs/namespace.c:2847 ksys_mount+0x12d/0x140 fs/namespace.c:3063 __do_sys_mount fs/namespace.c:3077 [inline] __se_sys_mount fs/namespace.c:3074 [inline] __x64_sys_mount+0xbe/0x150 fs/namespace.c:3074 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x443d6a RSP: 002b:00007ffd312813c8 EFLAGS: 00000297 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 0000000020000c00 RCX: 0000000000443d6a RDX: 0000000020000000 RSI: 0000000020000100 RDI: 00007ffd312813d0 RBP: 0000000000000003 R08: 0000000020016a00 R09: 000000000000000a R10: 0000000000000000 R11: 0000000000000297 R12: 0000000000000004 R13: 0000000000402c60 R14: 0000000000000000 R15: 0000000000000000 RIP: build_sit_entries fs/f2fs/segment.c:3653 [inline] RSP: ffff8801b102e5b0 RIP: build_segment_manager+0x7ef7/0xbf70 fs/f2fs/segment.c:3852 RSP: ffff8801b102e5b0 CR2: ffffed006b2a50c0 ---[ end trace a2034989e196ff17 ]--- Reported-and-tested-by: syzbot+83699adeb2d13579c31e@syzkaller.appspotmail.com Reviewed-by:
-
Yunlei He authored
commit 0833721e upstream. This patch check blkaddr more accuratly before issue a write or read bio. Signed-off-by:
Yunlei He <heyunlei@huawei.com> Reviewed-by:
-
Jaegeuk Kim authored
commit c39a1b34 upstream. Let's avoid BUG_ON during fill_super, when on-disk was totall corrupted. Reviewed-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Chao Yu authored
commit 30a61ddf upstream. In below concurrent case, allocated nid can be loaded into free nid cache and be allocated again. Thread A Thread B - f2fs_create - f2fs_new_inode - alloc_nid - __insert_nid_to_list(ALLOC_NID_LIST) - f2fs_balance_fs_bg - build_free_nids - __build_free_nids - scan_nat_page - add_free_nid - __lookup_nat_cache - f2fs_add_link - init_inode_metadata - new_inode_page - new_node_page - set_node_addr - alloc_nid_done - __remove_nid_from_list(ALLOC_NID_LIST) - __insert_nid_to_list(FREE_NID_LIST) This patch makes nat cache lookup and free nid list operation being atomical to avoid this race condition. Signed-off-by:
-
Jaegeuk Kim authored
commit a2125ff7 upstream. This fixes missing freeing meta pages in the error case. Tested-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Jaegeuk Kim authored
commit 2040fce8 upstream. Previous mkfs.f2fs allows small partition inappropriately, so f2fs should detect that as well. Refer this in f2fs-tools. mkfs.f2fs: detect small partition by overprovision ratio and # of segments Reported-and-Tested-by:
-
Jaegeuk Kim authored
commit 8508e44a upstream. We don't guarantee cp_addr is fixed by cp_version. This is to sync with f2fs-tools. Signed-off-by:
-
Jaegeuk Kim authored
commit 9e1e6df4 upstream. Before checkpoint, we'd be better drop any inodes. Signed-off-by:
-
Tiezhu Yang authored
commit fc0065ad upstream. There exists almost same codes when get the value of pre_version and cur_version in function validate_checkpoint, this patch adds get_checkpoint_version to clean up redundant codes. Signed-off-by:
Tiezhu Yang <kernelpatch@126.com> Reviewed-by:
-
Jaegeuk Kim authored
commit a468f0ef upstream. Previously, we used cp_version only to detect recoverable dnodes. In order to avoid same garbage cp_version, we needed to truncate the next dnode during checkpoint, resulting in additional discard or data write. If we can distinguish this by using crc in addition to cp_version, we can remove this overhead. There is backward compatibility concern where it changes node_footer layout. So, this patch introduces a new checkpoint flag, CP_CRC_RECOVERY_FLAG, to detect new layout. New layout will be activated only when this flag is set. Signed-off-by:
-
Chao Yu authored
commit d600af23 upstream. When building each sit entry in cache, firstly, we will load it from sit page, and then check all entries in sit journal, if there is one updated entry in journal, cover cached entry with the journaled one. Actually, most of check operation is unneeded since we only need to update cached entries with journaled entries in batch, so changing the flow as below for more efficient: 1. load all sit entries into cache from sit pages; 2. update sit entries with journal. Signed-off-by:
-
Yunlei He authored
commit bb413d6a upstream. we came across an error as below: [build_nat_area_bitmap:1710] nid[0x 1718] addr[0x 1c18ddc] ino[0x 1718] [build_nat_area_bitmap:1710] nid[0x 1719] addr[0x 1c193d5] ino[0x 1719] [build_nat_area_bitmap:1710] nid[0x 171a] addr[0x 1c1736e] ino[0x 171a] [build_nat_area_bitmap:1710] nid[0x 171b] addr[0x 58b3ee8f] ino[0x815f92ed] [build_nat_area_bitmap:1710] nid[0x 171c] addr[0x fcdc94b] ino[0x49366377] [build_nat_area_bitmap:1710] nid[0x 171d] addr[0x 7cd2facf] ino[0xb3c55300] [build_nat_area_bitmap:1710] nid[0x 171e] addr[0x bd4e25d0] ino[0x77c34c09] ... ... [build_nat_area_bitmap:1710] nid[0x 1718] addr[0x 1c18ddc] ino[0x 1718] [build_nat_area_bitmap:1710] nid[0x 1719] addr[0x 1c193d5] ino[0x 1719] [build_nat_area_bitmap:1710] nid[0x 171a] addr[0x 1c1736e] ino[0x 171a] [build_nat_area_bitmap:1710] nid[0x 171b] addr[0x 58b3ee8f] ino[0x815f92ed] [build_nat_area_bitmap:1710] nid[0x 171c] addr[0x fcdc94b] ino[0x49366377] [build_nat_area_bitmap:1710] nid[0x 171d] addr[0x 7cd2facf] ino[0xb3c55300] [build_nat_area_bitmap:1710] nid[0x 171e] addr[0x bd4e25d0] ino[0x77c34c09] One nat block may be stepped by a data block, so this patch forbid to write if the blkaddr is illegal Signed-off-by:
-
Chao Yu authored
commit 78682f79 upstream. For encrypted inode, if user overwrites data of the inode, f2fs will read encrypted data into page cache, and then do the decryption. However reader can race with overwriter, and it will see encrypted data which has not been decrypted by overwriter yet. Fix it by moving decrypting work to background and keep page non-uptodated until data is decrypted. Thread A Thread B - f2fs_file_write_iter - __generic_file_write_iter - generic_perform_write - f2fs_write_begin - f2fs_submit_page_bio - generic_file_read_iter - do_generic_file_read - lock_page_killable - unlock_page - copy_page_to_iter hit the encrypted data in updated page - lock_page - fscrypt_decrypt_page Signed-off-by:
-
Chao Yu authored
commit f61cce5b upstream. When testing f2fs with inline_dentry option, generic/342 reports: VFS: Busy inodes after unmount of dm-0. Self-destruct in 5 seconds. Have a nice day... After rmmod f2fs module, kenrel shows following dmesg: ============================================================================= BUG f2fs_inode_cache (Tainted: G O ): Objects remaining in f2fs_inode_cache on __kmem_cache_shutdown() ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Slab 0xf51ca0e0 objects=22 used=1 fp=0xd1e6fc60 flags=0x40004080 CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 00000086 00000086 d062fe18 c13a83a0 f51ca0e0 d062fe38 d062fea4 c11c7276 c1981040 f51ca0e0 00000016 00000001 d1e6fc60 40004080 656a624f 20737463 616d6572 6e696e69 6e692067 66326620 6e695f73 5f65646f 68636163 6e6f2065 Call Trace: [<c13a83a0>] dump_stack+0x5f/0x8f [<c11c7276>] slab_err+0x76/0x80 [<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0 [<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0 [<c11cbfe5>] __kmem_cache_shutdown+0x125/0x2f0 [<c1198a38>] kmem_cache_destroy+0x158/0x1f0 [<c176b43d>] ? mutex_unlock+0xd/0x10 [<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs] [<c10f596c>] SyS_delete_module+0x16c/0x1d0 [<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0 [<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20 [<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210 [<c10ad50b>] ? trace_hardirqs_off+0xb/0x10 [<c1001b81>] do_fast_syscall_32+0xa1/0x1c0 [<c176d888>] sysenter_past_esp+0x45/0x74 INFO: Object 0xd1e6d9e0 @offset=6624 kmem_cache_destroy f2fs_inode_cache: Slab cache still has objects CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 00000286 00000286 d062fef4 c13a83a0 f174b000 d062ff14 d062ff28 c1198ac7 c197fe18 f3c5b980 d062ff20 000d04f2 d062ff0c d062ff0c d062ff14 d062ff14 f8f20dc0 fffffff5 d062e000 d062ff30 f8f15aa3 d062ff7c c10f596c 73663266 Call Trace: [<c13a83a0>] dump_stack+0x5f/0x8f [<c1198ac7>] kmem_cache_destroy+0x1e7/0x1f0 [<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs] [<c10f596c>] SyS_delete_module+0x16c/0x1d0 [<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0 [<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20 [<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210 [<c10ad50b>] ? trace_hardirqs_off+0xb/0x10 [<c1001b81>] do_fast_syscall_32+0xa1/0x1c0 [<c176d888>] sysenter_past_esp+0x45/0x74 The reason is: in recovery flow, we use delayed iput mechanism for directory which has recovered dentry block. It means the reference of inode will be held until last dirty dentry page being writebacked. But when we mount f2fs with inline_dentry option, during recovery, dirent may only be recovered into dir inode page rather than dentry page, so there are no chance for us to release inode reference in ->writepage when writebacking last dentry page. We can call paired iget/iput explicityly for inline_dentry case, but for non-inline_dentry case, iput will call writeback_single_inode to write all data pages synchronously, but during recovery, ->writepages of f2fs skips writing all pages, result in losing dirent. This patch fixes this issue by obsoleting old mechanism, and introduce a new dir_list to hold all directory inodes which has recovered datas until finishing recovery. Signed-off-by:
-
Chao Yu authored
commit 3f8ab270 upstream. Factor out fsync inode entry operations into {add,del}_fsync_inode. Signed-off-by:
-
Jaegeuk Kim authored
commit fb58ae22 upstream. This patch removes an obsolete variable used in add_free_nid. Signed-off-by:
-
Jaegeuk Kim authored
commit 6781eabb upstream. Once detecting something to recover, f2fs should stop mounting, given norecovery and rw mount options. Signed-off-by:
-
Chao Yu authored
With below serials, we will lose parts of dirents: 1) mount f2fs with inline_dentry option 2) echo 1 > /sys/fs/f2fs/sdX/dir_level 3) mkdir dir 4) touch 180 files named [1-180] in dir 5) touch 181 in dir 6) echo 3 > /proc/sys/vm/drop_caches 7) ll dir ls: cannot access 2: No such file or directory ls: cannot access 4: No such file or directory ls: cannot access 5: No such file or directory ls: cannot access 6: No such file or directory ls: cannot access 8: No such file or directory ls: cannot access 9: No such file or directory ... total 360 drwxr-xr-x 2 root root 4096 Feb 19 15:12 ./ drwxr-xr-x 3 root root 4096 Feb 19 15:11 ../ -rw-r--r-- 1 root root 0 Feb 19 15:12 1 -rw-r--r-- 1 root root 0 Feb 19 15:12 10 -rw-r--r-- 1 root root 0 Feb 19 15:12 100 -????????? ? ? ? ? ? 101 -????????? ? ? ? ? ? 102 -????????? ? ? ? ? ? 103 ... The reason is: when doing the inline dir conversion, we didn't consider that directory has hierarchical hash structure which can be configured through sysfs interface 'dir_level'. By default, dir_level of directory inode is 0, it means we have one bucket in hash table located in first level, all dirents will be hashed in this bucket, so it has no problem for us to do the duplication simply between inline dentry page and converted normal dentry page. However, if we configured dir_level with the value N (greater than 0), it will expand the bucket number of first level hash table by 2^N - 1, it hashs dirents into different buckets according their hash value, if we still move all dirents to first bucket, it makes incorrent locating for inline dirents, the result is, although we can iterate all dirents through ->readdir, we can't stat some of them in ->lookup which based on hash table searching. This patch fixes this issue by rehashing dirents into correct position when converting inline directory. Signed-off-by:
Chao Yu <chao2.yu@samsung.com> Signed-off-by:
-
Shawn Lin authored
commit 984ec63c upstream. >From the function name of get_valid_checkpoint, it seems to return the valid cp or NULL for caller to check. If no valid one is found, f2fs_fill_super will print the err log. But if get_valid_checkpoint get one valid(the return value indicate that it's valid, however actually it is invalid after sanity checking), then print another similar err log. That seems strange. Let's keep sanity checking inside the procedure of geting valid cp. Another improvement we gained from this move is that even the large volume is supported, we check the cp in advanced to skip the following procedure if failing the sanity checking. Signed-off-by:
Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by:
-
Jaegeuk Kim authored
commit a5131193 upstream. There was a subtle bug on nat cache management which incurs wrong nid allocation or wrong block addresses when try_to_free_nats is triggered heavily. This patch enlarges the previous coverage of nat_tree_lock to avoid data race. Signed-off-by:
-
Chao Yu authored
commit b7973f23 upstream. In recover_data, value of argument 'type' will be CURSEG_WARM_NODE all the time, remove it for cleanup. Signed-off-by:
-
Oliver Hartkopp authored
commit 0aaa8137 upstream. Muyu Yu provided a POC where user root with CAP_NET_ADMIN can create a CAN frame modification rule that makes the data length code a higher value than the available CAN frame data size. In combination with a configured checksum calculation where the result is stored relatively to the end of the data (e.g. cgw_csum_xor_rel) the tail of the skb (e.g. frag_list pointer in skb_shared_info) can be rewritten which finally can cause a system crash. Michael Kubecek suggested to drop frames that have a DLC exceeding the available space after the modification process and provided a patch that can handle CAN FD frames too. Within this patch we also limit the length for the checksum calculations to the maximum of Classic CAN data length (8). CAN frames that are dropped by these additional checks are counted with the CGW_DELETED counter which indicates misconfigurations in can-gw rules. This fixes CVE-2019-3701. Reported-by:
Muyu Yu <ieatmuttonchuan@gmail.com> Reported-by:
Marcus Meissner <meissner@suse.de> Suggested-by:
Michal Kubecek <mkubecek@suse.cz> Tested-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Dmitry Safonov authored
commit 231f8fd0 upstream. ldsem_down_read() will sleep if there is pending writer in the queue. If the writer times out, readers in the queue should be woken up, otherwise they may miss a chance to acquire the semaphore until the last active reader will do ldsem_up_read(). There was a couple of reports where there was one active reader and other readers soft locked up: Showing all locks held in the system: 2 locks held by khungtaskd/17: #0: (rcu_read_lock){......}, at: watchdog+0x124/0x6d1 #1: (tasklist_lock){.+.+..}, at: debug_show_all_locks+0x72/0x2d3 2 locks held by askfirst/123: #0: (&tty->ldisc_sem){.+.+.+}, at: ldsem_down_read+0x46/0x58 #1: (&ldata->atomic_read_lock){+.+...}, at: n_tty_read+0x115/0xbe4 Prevent readers wait for active readers to release ldisc semaphore. Link: lkml.kernel.org/r/20171121132855.ajdv4k6swzhvktl6@wfg-t540p.sh.intel.com Link: lkml.kernel.org/r/20180907045041.GF1110@shao2-debian Cc: Jiri Slaby <jslaby@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Reported-by:
kernel test robot <rong.a.chen@intel.com> Signed-off-by:
Dmitry Safonov <dima@arista.com> Signed-off-by:
-
- 16 Jan, 2019 12 commits
-
-
Greg Kroah-Hartman authored
-
Vasily Averin authored
commit d4b09acf upstream. if node have NFSv41+ mounts inside several net namespaces it can lead to use-after-free in svc_process_common() svc_process_common() /* Setup reply header */ rqstp->rq_xprt->xpt_ops->xpo_prep_reply_hdr(rqstp); <<< HERE svc_process_common() can use incorrect rqstp->rq_xprt, its caller function bc_svc_process() takes it from serv->sv_bc_xprt. The problem is that serv is global structure but sv_bc_xprt is assigned per-netnamespace. According to Trond, the whole "let's set up rqstp->rq_xprt for the back channel" is nothing but a giant hack in order to work around the fact that svc_process_common() uses it to find the xpt_ops, and perform a couple of (meaningless for the back channel) tests of xpt_flags. All we really need in svc_process_common() is to be able to run rqstp->rq_xprt->xpt_ops->xpo_prep_reply_hdr() Bruce J Fields points that this xpo_prep_reply_hdr() call is an awfully roundabout way just to do "svc_putnl(resv, 0);" in the tcp case. This patch does not initialiuze rqstp->rq_xprt in bc_svc_process(), now it calls svc_process_common() with rqstp->rq_xprt = NULL. To adjust reply header svc_process_common() just check rqstp->rq_prot and calls svc_tcp_prep_reply_hdr() for tcp case. To handle rqstp->rq_xprt = NULL case in functions called from svc_process_common() patch intruduces net namespace pointer svc_rqst->rq_bc_net and adjust SVC_NET() definition. Some other function was also adopted to properly handle described case. Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Cc: stable@vger.kernel.org Fixes: 23c20ecd ("NFS: callback up - users counting cleanup") Signed-off-by:
J. Bruce Fields <bfields@redhat.com> v2: - added lost extern svc_tcp_prep_reply_hdr() - dropped trace_svc_process() changes - context fixes in svc_process_common() Signed-off-by:
-
Theodore Ts'o authored
commit 2b08b1f1 upstream. The ext4_inline_data_fiemap() function calls fiemap_fill_next_extent() while still holding the xattr semaphore. This is not necessary and it triggers a circular lockdep warning. This is because fiemap_fill_next_extent() could trigger a page fault when it writes into page which triggers a page fault. If that page is mmaped from the inline file in question, this could very well result in a deadlock. This problem can be reproduced using generic/519 with a file system configuration which has the inline_data feature enabled. Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
-
Eric Biggers authored
[It's a minimal fix for a bug that was fixed incidentally by a large refactoring in v4.8.] In the CTS template, when the input length is <= one block cipher block (e.g. <= 16 bytes for AES) pass the correct length to the underlying CBC transform rather than one block. This matches the upstream behavior and makes the encryption/decryption operation correctly return -EINVAL when 1 <= nbytes < bsize or succeed when nbytes == 0, rather than crashing. This was fixed upstream incidentally by a large refactoring, commit 0605c41c ("crypto: cts - Convert to skcipher"). But syzkaller easily trips over this when running on older kernels, as it's easily reachable via AF_ALG. Therefore, this patch makes the minimal fix for older kernels. Cc: linux-crypto@vger.kernel.org Fixes: 76cb9521 ("[CRYPTO] cts: Add CTS mode required for Kerberos AES support") Signed-off-by:
-
Yi Zeng authored
commit 6ebec961 upstream. If adapter->retries is set to a minus value from user space via ioctl, it will make __i2c_transfer and __i2c_smbus_xfer skip the calling to adapter->algo->master_xfer and adapter->algo->smbus_xfer that is registered by the underlying bus drivers, and return value 0 to all the callers. The bus driver will never be accessed anymore by all users, besides, the users may still get successful return value without any error or information log print out. If adapter->timeout is set to minus value from user space via ioctl, it will make the retrying loop in __i2c_transfer and __i2c_smbus_xfer always break after the the first try, due to the time_after always returns true. Signed-off-by:
Yi Zeng <yizeng@asrmicro.com> [wsa: minor grammar updates to commit message] Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org Signed-off-by:
-
Hans de Goede authored
commit 7d7b467c upstream. Some ACPI tables contain duplicate power resource references like this: Name (_PR0, Package (0x04) // _PR0: Power Resources for D0 { P28P, P18P, P18P, CLK4 }) This causes a WARN_ON in sysfs_add_link_to_group() because we end up adding a link to the same acpi_device twice: sysfs: cannot create duplicate filename '/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/808622C1:00/OVTI2680:00/power_resources_D0/LNXPOWER:0a' CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.12-301.fc29.x86_64 #1 Hardware name: Insyde CherryTrail/Type2 - Board Product Name, BIOS jumperx.T87.KFBNEEA02 04/13/2016 Call Trace: dump_stack+0x5c/0x80 sysfs_warn_dup.cold.3+0x17/0x2a sysfs_do_create_link_sd.isra.2+0xa9/0xb0 sysfs_add_link_to_group+0x30/0x50 acpi_power_expose_list+0x74/0xa0 acpi_power_add_remove_device+0x50/0xa0 acpi_add_single_object+0x26b/0x5f0 acpi_bus_check_add+0xc4/0x250 ... To address this issue, make acpi_extract_power_resources() check for duplicates and simply skip them when found. Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> [ rjw: Subject & changelog, comments ] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Ley Foon Tan authored
commit ce4f1c7a upstream. Previously we used a PCI early fixup to initiate a link retrain on Altera devices. But Altera PCIe IP can be configured as either a Root Port or an Endpoint, and they might have same vendor ID, so the fixup would be run for both. We only want to initiate a link retrain for Altera Root Port devices, not for Endpoints, so move the link retrain functionality from the fixup to altera_pcie_host_init(). [bhelgaas: changelog] Signed-off-by:
Ley Foon Tan <lftan@altera.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: Claudius Heine <claudius.heine.ext@siemens.com> Signed-off-by:
-
Ley Foon Tan authored
commit 31fc0ad4 upstream. Rework configs accessors so a future patch can use them in _probe() with struct altera_pcie instead of struct pci_bus. Signed-off-by:
-
Ley Foon Tan authored
commit 411dc32d upstream. Poll for link training status is cleared before poll for link up status. This can help to get the reliable link up status, especially when PCIe is in Gen 3 speed. Signed-off-by:
-
Ley Foon Tan authored
commit 3a928e98 upstream. Some PCIe devices take a long time to reach link up state after retrain. Poll for link up status after retraining the link. This is to make sure the link is up before we access configuration space. [bhelgaas: changelog] Signed-off-by:
-
Ley Foon Tan authored
commit c622032e upstream. Check the link status before retraining. If the link is not up, don't bother trying to retrain it. [bhelgaas: split code move to separate patch, changelog] Signed-off-by:
-
Bjorn Helgaas authored
commit f8be11ae upstream. Move cra_writel(), cra_readl(), and altera_pcie_link_is_up() so a future patch can use them in altera_pcie_retrain(). No functional change intended. Signed-off-by:
-
