- 24 Feb, 2008 25 commits
-
-
Jeff Dike authored
The macros which extract registers from a struct sigcontext are no longer needed and can be removed. They are starting not to build anyway, given the removal of the 'e' and 'r' from register names during the x86 merge. Cc: Jiri Olsa <olsajiri@gmail.com> Signed-off-by:
Jeff Dike <jdike@linux.intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jean Delvare authored
Now that we gather on-board devices from both DMI types 10 and 41, there is a possibility that we list the same device twice. In order to not confuse drivers, and also to save memory, make sure that we do not add duplicate devices to the dmi_devices list. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
David Brownell authored
For the "cmos" RTC, have /proc/driver/rtc say whether HPET based IRQ emulation is in effect. Given the problems we've had with this particular hardware maldesign (and the fact that most BIOS code seems not to provide the IRQ routing needed to use the saner HPET modes), this should help troubleshooting. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Michael Buesch authored
It turns out that I rewrote the HWRNG core once to make it pluggable, but I'm not a crypto-expert at all. So I'm certainly the wrong person for being a maintainer of the HWRNG core. Let's orphan it. Signed-off-by:
Michael Buesch <mb@bu3sch.de> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
KOSAKI Motohiro authored
Current implementation of cpuset track N_HIGH_MEMORY instead N_MEMORY. (N_MEMORY doesn't exist in current implementation) Signed-off-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by:
Paul Jackson <pj@sgi.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: Paul Menage <menage@google.com> Signed-off-by:
-
Ned Forrester authored
Fixes a sequencing bug in spi driver pxa2xx_spi.c in which the chip select for a transfer may be asserted before the clock polarity is set on the interface. As a result of this bug, the clock signal may have the wrong polarity at transfer start, so it may need to make an extra half transition before the intended clock/data signals begin. (This probably means all transfers are one bit out of sequence.) This only occurs on the first transfer following a change in clock polarity in systems using more than one more than one such polarity. The fix assures that the clock mode is properly set before asserting chip select. This bug was introduced in a patch merged on 2006/12/10, kernel 2.6.20. The patch defines an additional bit in: include/asm-arm/arch-pxa/regs-ssp.h for 2.6.25 and newer kernels but this addition must be made in: include/asm-arm/arch-pxa/pxa-regs.h for kernels between 2.6.20 and 2.6.24, inclusive Signed-off-by:
Ned Forrester <nforrester@whoi.edu> Signed-off-by:
-
Atsushi Nemoto authored
The atmel_spi driver does not initialize clock polarity correctly (except for at91rm9200 CS0 channel) in some case. The atmel_spi driver uses gpio-controlled chipselect. OTOH spi clock signal is controlled by CSRn.CPOL bit, but this register controls clock signal correctly only in 'real transfer' duration. At the time of cs_activate() call, CSRn.CPOL will be initialized correctly, but the controller do not know which channel is to be used next, so clock signal will stay at the inactive state of last transfer. If clock polarity of new transfer and last transfer was differ, new transfer will start with wrong clock signal state. For example, if you started SPI MODE 2 or 3 transfer after SPI MODE 0 or 1 transfer, the clock signal state at the assertion of chipselect will be low. Of course this will violates SPI transfer. This patch is short term solution for this problem. It makes all CSRn.CPOL match for the transfer before activating chipselect. For longer term, the best fix might be to let NPCS0 stay selected permanently in MR and overwrite CSR0 with to the new slave's settings before asserting CS. Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by:
Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Hoang-Nam Nguyen authored
lib/vsprintf.c: Fix bug omitting minus sign of numbers (module_param) Signed-off-by:
Hoang-Nam Nguyen <hnguyen@de.ibm.com> Cc: Yi Yang <yi.y.yang@intel.com> Signed-off-by:
-
David Howells authored
Make is_vmalloc_addr() contingent on CONFIG_MMU=y, as it won't compile in !MMU mode. [ Bug introduced in commit 9e2779fa: "is_vmalloc_addr(): Check if an address is within the vmalloc boundaries" ]. Signed-off-by:
David Howells <dhowells@redhat.com> Cc: Greg Ungerer <gerg@snapgear.com> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Haavard Skinnemoen authored
We should only return IRQ_HANDLED when we actually found something to handle. This is important since the USART interrupt handler may be shared with the timer interrupt on some chips. Pointed-out-by:
michael <trimarchi@gandalf.sssup.it> Signed-off-by:
-
mark gross authored
The following is a clean up and correction of the copyright holding entities for the files associated with the intel iommu code. Signed-off-by: <mgross@linux.intel.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
David Rientjes authored
Fix build failure on sparc: In file included from include/linux/mm.h:39, from include/linux/memcontrol.h:24, from include/linux/swap.h:8, from include/linux/suspend.h:7, from init/do_mounts.c:6: include/asm/pgtable.h:344: warning: parameter names (without types) in function declaration include/asm/pgtable.h:345: warning: parameter names (without types) in function declaration include/asm/pgtable.h:346: error: expected '=', ',', ';', 'asm' or '__attribute__' before '___f___swp_entry' viro sayeth: I've run allmodconfig builds on a bunch of target, FWIW (essentially the same patch). Note that these includes are recent addition caused by added inline function that had since then become a define. So while I agree with your comments in general, in _this_ case it's pretty safe. The commit that had done it is 3062fc67 ("memcontrol: move mm_cgroup to header file") and the switch to #define is in commit 60c12b12 ("memcontrol: add vm_match_cgroup()") (BTW, that probably warranted mentioning in the changelog of the latter). Cc: Adrian Bunk <bunk@kernel.org> Cc: Robert Reif <reif@earthlink.net> Signed-off-by:
David Rientjes <rientjes@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Harvey Harrison authored
char can be unsigned kernel/marker.c:64:20: error: dubious one-bit signed bitfield kernel/marker.c:65:14: error: dubious one-bit signed bitfield Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Acked-by:
Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by:
-
Serge E. Hallyn authored
Simplify the uid equivalence check in cap_task_kill(). Anyone can kill a process owned by the same uid. Without this patch wireshark is reported to fail. Signed-off-by:
Serge E. Hallyn <serue@us.ibm.com> Signed-off-by:
Andrew G. Morgan <morgan@kernel.org> Cc: <stable@kernel.org> Signed-off-by:
-
Andy Whitcroft authored
When we free a page via free_huge_page and we detect that we are in surplus the page will be returned to the buddy. After this we no longer own the page. However at the end free_huge_page we clear out our mapping pointer from page private. Even where the page is not a surplus we free the page to the hugepage pool, drop the pool locks and then clear page private. In either case the page may have been reallocated. BAD. Make sure we clear out page private before we free the page. Signed-off-by:
Andy Whitcroft <apw@shadowen.org> Acked-by:
Adam Litke <agl@us.ibm.com> Cc: <stable@kernel.org> Signed-off-by:
-
Hans Rosenfeld authored
There seems to be a bug in the PM_SPECIAL macro for /proc/pid/pagemap. I think masking out those other bits makes more sense then setting all those mask bits. Signed-off-by:
Hans Rosenfeld <Hans.Rosenfeld@amd.com> Acked-by:
Matt Mackall <mpm@selenic.com> Cc: Dave Hansen <haveblue@us.ibm.com> Signed-off-by:
-
Geert Uytterhoeven authored
While linux-fbdev is subscribers-only, non-subscribers are not plainly rejected, but moderated, so the casual patch/comment/question comes through. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Roel Kluin authored
This bug snuck in with commit 252e211e Author: Mark Fortescue <mark@mtfhpc.demon.co.uk> Date: Tue Oct 16 23:26:31 2007 -0700 Add in SunOS 4.1.x compatible mode for UFS Signed-off-by:
Roel Kluin <12o3l@tiscali.nl> Acked-by:
Evgeniy Dushistov <dushistov@mail.ru> Cc: Mark Fortescue <mark@mtfhpc.demon.co.uk> Cc: <stable@kernel.org> Signed-off-by:
-
David Howells authored
Define SO_MARK for MN10300. Signed-off-by:
-
David Howells authored
Define HZ as a config option. Signed-off-by:
-
Miklos Szeredi authored
I added a nasty local variable shadowing bug to fuse in 2.6.24, with the result, that the 'default_permissions' mount option is basically ignored. How did this happen? - old err declaration in inner scope - new err getting declared in outer scope - 'return err' from inner scope getting removed - old declaration not being noticed -Wshadow would have saved us, but it doesn't seem practical for the kernel :( More testing would have also saved us :(( Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Cc: <stable@kernel.org> Signed-off-by:
-
Chris Snook authored
Make LKDTM depend on BLOCK to prevent build failures with certain configs. Signed-off-by:
Chris Snook <csnook@redhat.com> Acked-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
WANG Cong authored
Fix a shadowed variable in arch/um/kernel/mem.c, since there is a global variable has the same name. Cc: Jeff Dike <jdike@linux.intel.com> Signed-off-by:
WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by:
-
Jeff Dike authored
Update defconfig. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Johann Felix Soden authored
If the initrd file has zero-length, the error message should contain the filepath. Cc: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by:
Johann Felix Soden <johfel@users.sourceforge.net> Signed-off-by:
-
- 23 Feb, 2008 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (25 commits) [SCSI] qlogicpt: section fixes [SCSI] mvsas: convert from rough draft to working driver [SCSI] mvsas: Add Marvell 6440 SAS/SATA driver [SCSI] libsas: correctly flush the LU queue on error recovery [SCSI] aic94xx: fix sequencer hang on error recovery [SCSI] st: compile fix when DEBUG set to one [SCSI] stex: stex_internal_copy should be called with sg_count in struct st_ccb [SCSI] stex: stex_direct_copy shouldn't call dma_map_sg [SCSI] lpfc: Balance locking [SCSI] qla4xxx: fix up residual handling [SCSI] libsas: fix error handling [SCSI] arcmsr: fix message allocation [SCSI] mptbase: fix use-after-free's [SCSI] iscsi transport: make 2 functions static [SCSI] lpfc: make lpfc_disable_node() static [SCSI] ips: fix data buffer accessors conversion bug [SCSI] gdth: don't call pci_free_consistent under spinlock [SCSI] qla2xxx: fix compile warning for printk format [SCSI] aic7xx: mitigate HOST_MSG_LOOP invalid SCB ff panic [SCSI] scsi_debug: disable clustering ...
-
Hugh Dickins authored
2.6.25-rc1 percpu changes broke CONFIG_DEBUG_PREEMPT's per_cpu checking on several architectures. On s390, sparc64 and x86 it's been weakened to not checking at all; whereas on powerpc64 it's become too strict, issuing warnings from __raw_get_cpu_var in io_schedule and init_timer for example. Fix this by weakening powerpc's __my_cpu_offset to use the non-checking local_paca instead of get_paca (which itself contains such a check); and strengthening the generic my_cpu_offset to go the old slow way via smp_processor_id when CONFIG_DEBUG_PREEMPT (debug_smp_processor_id is where all the knowledge of what's correct when lives). Signed-off-by:
Hugh Dickins <hugh@veritas.com> Reviewed-by:
Mike Travis <travis@sgi.com> Signed-off-by:
-
Rafael J. Wysocki authored
During the last step of hibernation in the "platform" mode (with the help of ACPI) we use the suspend code, including the devices' ->suspend() methods, to prepare the system for entering the ACPI S4 system sleep state. But at least for some devices the operations performed by the ->suspend() callback in that case must be different from its operations during regular suspend. For this reason, introduce the new PM event type PM_EVENT_HIBERNATE and pass it to the device drivers' ->suspend() methods during the last phase of hibernation, so that they can distinguish this case and handle it as appropriate. Modify the drivers that handle PM_EVENT_SUSPEND in a special way and need to handle PM_EVENT_HIBERNATE in the same way. These changes are necessary to fix a hibernation regression related to the i915 driver (ref. http://lkml.org/lkml/2008/2/22/488). Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Acked-by:
Pavel Machek <pavel@ucw.cz> Tested-by:
Jeff Chua <jeff.chua.linux@gmail.com> Signed-off-by:
-
Adrian Bunk authored
In current mainline, __devinit qpti_sbus_probe() still is calling __init qpti_chain_add(). Change occurrences of __init to __devinit to fix. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
Ke Wei authored
Convert rough draft Marvell 6440 driver to a working driver. Added support for SAS and SATA devices, hotplug, wide port, and expanders. Signed-off-by:
Ke Wei <kewei@marvell.com> Signed-off-by:
-
Jeff Garzik authored
Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
-
Jesse Barnes authored
Make sure the restoration correctly restores the AR registers by flipping the ARX register into index mode before doing anything. Without this, some people have had the text mode restore all green. Signed-off-by:
Jesse Barnes <jesse.barnes@intel.com> Signed-off-by:
-
- 22 Feb, 2008 8 commits
-
-
James Bottomley authored
The current sas_scsi_clear_queue_lu() is wrongly checking for commands which match the pointer to the one passed in. It should be checking for commands which are on the same logical unit as the one passed in. Fix this by checking target pointer and LUN for equality. Signed-off-by: -
James Bottomley authored
The clear nexus I_T and clear nexus I_T_L functions in the aic94xx specify the SUSPEND_TX flag which causes the sequencer to be suspended until it receives a RESUME_TX. Unfortunately, nothing ever sends the resume, so the sequencer on the link is stopped forever, leading to eventual timeouts and I/O errors. Since clear nexus commands are only executed as part of error recovery, it's perfectly fine to keep the sequencer running on the link ... as soon as the recovery function is completed, we'll send it the commands to retry. Signed-off-by: -
Kai Makisara authored
Remove the now useless counting of adjacent pages from the debugging code in to make it compile when DEBUG is set non-zero. Signed-off-by:
Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by:
-
FUJITA Tomonori authored
stex_internal_copy copies an in-kernel buffer to a sg list by using scsi_kmap_atomic_sg. Some functions calls stex_internal_copy with sg_count in struct st_ccb, which is the value that dma_map_sg returned. However it might be shorter than the actual number of sg entries (if the IOMMU merged the sg entries). scsi_kmap_atomic_sg doesn't see sg->dma_length so stex_internal_copy should be called with the actual number of sg entries (i.e. scsi_sg_count), because if the sg entries were merged, stex_direct_copy wrongly think that the data length in the sg list is shorter than the actual length. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by:
Ed Lin <ed.lin@promise.com> Signed-off-by:
-
FUJITA Tomonori authored
stex_direct_copy copies an in-kernel buffer to a sg list in order to spoof some SCSI commands. stex_direct_copy calls dma_map_sg and then stex_internal_copy with the value that dma_map_sg returned. It calls scsi_kmap_atomic_sg to copy data. scsi_kmap_atomic_sg doesn't see sg->dma_length so if dma_map_sg merges sg entries, stex_internal_copy gets the smaller number of sg entries than the acutual number, which means it wrongly think that the data length in the sg list is shorter than the actual length. stex_direct_copy shouldn't call dma_map_sg and it doesn't need since this code path doesn't involve dma transfers. This patch removes stex_direct_copy and simply calls stex_internal_copy with the actual number of sg entries. Signed-off-by:
-
Matthew Wilcox authored
Commit 3163f725 introduced locking in lpfc_sli_hbqbuf_fill_hbqs, but missed unlocking on one exit. Reported-by:
Matthew Wilcox <willy@linux.intel.com> Acked-by:
James Smart <james.smart@emulex.com> Signed-off-by:
-
David Somayajulu authored
the check in the residual case has an incorrect test of scsi_status (the logic is reversed, it should be scsi_status != 0 instead of !scsi_status. Since we checked a few lines above that scsi_status was non-zero, just eliminate this test Signed-off-by:
David C Somayajulu <david.somayajulu@qlogic.com> Signed-off-by:
-
James Bottomley authored
The libsas error handler has two fairly fatal bugs 1. scsi_sas_task_done calls scsi_eh_finish_cmd() too early. This happens if the task completes after it has been aborted but before the error handler starts up. Because scsi_eh_finish_cmd() decrements host_failed and adds the task to the done list, the error handler start check (host_failed == host_busy) never passes and the eh never starts. 2. The multiple task completion paths sas_scsi_clear_queue_... all simply delete the task from the error queue. This causes it to disappear into the ether, since a command must be placed on the done queue to be finished off by the error handler. This behaviour causes the HBA to hang on pending commands. Fix 1. by moving the SAS_TASK_STATE_ABORTED check to an exit clause at the top of the routine and calling ->scsi_done() unconditionally (it is a nop if the timer has fired). This keeps the task in the error handling queue until the eh starts. Fix 2. by making sure every task goes through task complete followed by scsi_eh_finish_cmd(). Tested this by firing resets across a disk running a hammer test (now it actually survives without hanging the system) Signed-off-by:
-
