- 21 Oct, 2021 14 commits
-
-
Loic Poulain authored
Submitting AP probe/null during suspend can cause unexpected disconnect on resume because of timeout waiting for ack status: wlan0: Failed to send nullfunc to AP 11:22:33:44:55:66 after 500ms, disconnecting This is especially the case when we enter suspend when a scan is ongoing, indeed, scan is cancelled from __ieee80211_suspend, leading to a corresponding (aborted) scan complete event, which in turn causes the submission of an immediate monitor null frame (restart_sta_timer). The corresponding packet or ack will not be processed before resuming, causing a timeout & disconnect on resume. Delay the AP probing when suspending/suspended. Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1634805927-1113-1-git-send-email-loic.poulain@linaro.orgSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Srinivasan Raju authored
Define LC band which is a draft under IEEE 802.11bb. Current NL80211_BAND_LC is a placeholder band and will be more defined IEEE 802.11bb progresses. Signed-off-by:
Srinivasan Raju <srini.raju@purelifi.com> Link: https://lore.kernel.org/r/20211018100143.7565-2-srini.raju@purelifi.comSigned-off-by:
-
Emmanuel Grumbach authored
Explain more the expected flow for this command. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://lore.kernel.org/r/20211020051147.29297-1-emmanuel.grumbach@intel.comSigned-off-by:
-
Aloka Dixit authored
Split __ieee80211_beacon_get() into a separate function for AP mode ieee80211_beacon_get_ap(). Also, move the code common to all modes (AP, adhoc and mesh) to a separate function ieee80211_beacon_get_finish(). Signed-off-by:
Aloka Dixit <alokad@codeaurora.org> Link: https://lore.kernel.org/r/20211006040938.9531-2-alokad@codeaurora.orgSigned-off-by:
-
Wen Gong authored
Get channel number from ies is a common logic, so separate it to a new function, which could also be used by lower driver. Signed-off-by:
Wen Gong <wgong@codeaurora.org> Link: https://lore.kernel.org/r/20210930081533.4898-1-wgong@codeaurora.orgSigned-off-by:
-
Johannes Berg authored
There are a number of uses of ieee80211_bss_get_ie(), replace most of them with ieee80211_bss_get_elem(). Link: https://lore.kernel.org/r/20210930131130.9a413f12a151.I0699ba7e48c9d88dbbfa3107cf4d34a8345d02a0@changeidSigned-off-by:
-
Johannes Berg authored
There are a few easy cases where we only check for NULL or have just simple use of the result, this can be done with the element finding functions instead. Link: https://lore.kernel.org/r/20210930131130.f27c8a7ec264.Iadb03c4307e9216e080ce513e8ad4048cd020b25@changeidSigned-off-by:
-
Johannes Berg authored
The element finding functions are safer, so use them instead of the "find_ie" functions. Link: https://lore.kernel.org/r/20210930131130.b838f139cc8e.I2b641262d3fc6e0d498719bf343fdc1c0833b845@changeidSigned-off-by:
-
Johannes Berg authored
Replace the use of cfg80211_find_ext_ie() with the more structured cfg80211_find_ext_elem(). Link: https://lore.kernel.org/r/20210930131130.17ecf37f0605.I853c2f9c2117a713deca9b8deb3552796d98ffac@changeidSigned-off-by:
-
Johannes Berg authored
My previous commit 5d24828d ("mac80211: always allocate struct ieee802_11_elems") had a few bugs and leaked the new allocated struct in a few error cases, fix that. Fixes: 5d24828d ("mac80211: always allocate struct ieee802_11_elems") Signed-off-by:
-
Jakub Kicinski authored
netdev->dev_addr will be const soon. All callers of wdev_address() can take const already. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20211019162816.1384077-2-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Convert mac80211 from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Signed-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Signed-off-by:
-
Mordechay Goodstein authored
In breaking patch buf memory moved from stack to heap and sizeof(buf) change from size of actual memory to size of the pointer to the heap. Fix this by holding a separated variable for allocate size. Fixes: 01f84f0e ("mac80211: reduce stack usage in debugfs") Signed-off-by:
Mordechay Goodstein <mordechay.goodstein@intel.com> Link: https://lore.kernel.org/r/20211021163035.b9ae48c06e27.I6a6ed197110eae28cf4f6e38ce36828a7c136337@changeidSigned-off-by:
-
- 28 Sep, 2021 1 commit
-
-
John Crispin authored
Configure multiple BSSID and enhanced multi-BSSID advertisement (EMA) parameters in mac80211 for AP mode. For each interface, 'mbssid_tx_vif' points to the transmitting interface of the MBSSID set. The pointer is set to NULL if MBSSID is disabled. Function ieee80211_stop() is modified to always bring down all the non-transmitting interfaces first and the transmitting interface last. Signed-off-by:
John Crispin <john@phrozen.org> Co-developed-by:
-
- 27 Sep, 2021 8 commits
-
-
John Crispin authored
Add new attributes to configure support for multiple BSSID and advanced multi-BSSID advertisements (EMA) in AP mode. - NL80211_ATTR_MBSSID_CONFIG used for per interface configuration. - NL80211_ATTR_MBSSID_ELEMS used to MBSSID elements for beacons. Memory for the elements is allocated dynamically. This change frees the memory in existing functions which call nl80211_parse_beacon(), a comment is added to indicate the new references to do the same. Signed-off-by:
-
Johannes Berg authored
When parse_acl_data() fails, we get an ERR_PTR() value and then "goto out;", in this case we'd attempt to kfree() it. Fix that. Fixes: 9e263e19 ("nl80211: don't put struct cfg80211_ap_settings on stack") Link: https://lore.kernel.org/r/20210927134402.86c5ae06c952.Ic51e234d998b9045665e5ff8b6db7e29f25d70c0@changeidSigned-off-by:
-
Johannes Berg authored
In the (somewhat unlikely) event that we allocate a wiphy, then add a regdomain to it, and then fail registration, we leak the regdomain. Fix this by just always freeing it at the end, in the normal cases we'll free (and NULL) it during wiphy_unregister(). This happened when the wiphy settings were bad, and since they can be controlled by userspace with hwsim, syzbot was able to find this issue. Reported-by: syzbot+1638e7c770eef6b6c0d0@syzkaller.appspotmail.com Fixes: 3e0c3ff3 ("cfg80211: allow multiple driver regulatory_hints()") Signed-off-by:
-
Wen Gong authored
This is to save the transmit power envelope element and power constraint in struct ieee80211_bss_conf for 6 GHz. Lower driver will use this info to calculate the power limit. Signed-off-by:
-
Wen Gong authored
This patch is to convert the regulatory info subfield in HE operation element to power type and save in struct cfg80211_chan_def. Signed-off-by:
-
Wen Gong authored
6 GHz regulatory domains introduces different modes for 6 GHz AP operations: Low Power Indoor (LPI), Standard Power (SP) and Very Low Power (VLP). 6 GHz STAs could be operated as either Regular or Subordinate clients. Define the flags for power type of AP and STATION mode. Signed-off-by:
-
Johannes Berg authored
Since we're pointing into a frame, the pointer to the twt_agrt->req_type struct member is potentially not aligned properly. Open-code le16p_replace_bits() to avoid passing an unaligned pointer. Reported-by:
kernel test robot <lkp@intel.com> Fixes: f5a4c24e ("mac80211: introduce individual TWT support in AP mode") Signed-off-by:
-
Subrat Mishra authored
Add a driver FILS crypto offload extended capability flag to indicate that the driver running in AP mode is capable of handling encryption and decryption of (Re)Association request and response frames. Add a command to set FILS AAD data to driver. This feature is supported on drivers running in AP mode only. This extended capability is exchanged with hostapd during cfg80211 init. If the driver indicates this capability, then before sending the Authentication response frame, hostapd sets FILS AAD data to the driver. This allows the driver to decrypt (Re)Association Request frame and encrypt (Re)Association Response frame. FILS Key derivation will still be done in hostapd. Signed-off-by:
Subrat Mishra <subratm@codeaurora.org> Link: https://lore.kernel.org/r/1631685143-13530-1-git-send-email-subratm@codeaurora.org [fix whitespace] Signed-off-by:
-
- 24 Sep, 2021 2 commits
-
-
Ramon Fontes authored
Advertise 6 GHz channels with HE (and without HT/VHT) capabilities. Signed-off-by:
Ramon Fontes <ramonreisfontes@gmail.com> Link: https://lore.kernel.org/r/20210923182805.27122-1-ramonreisfontes@gmail.comSigned-off-by:
-
Wen Gong authored
In function ieee80211_prep_channel(), it has some ieee80211_bss_get_ie() and cfg80211_find_ext_ie() to get the IE, this is to use another function ieee802_11_parse_elems() to get all the IEs in one time. Signed-off-by:
-
- 23 Sep, 2021 9 commits
-
-
Johannes Berg authored
This struct has grown quite a bit, so dynamically allocate it instead of putting it on the stack. Link: https://lore.kernel.org/r/20210923161836.5813d881eae3.I0fc0f83905b0bfa332c4f1505e00c13abfca3545@changeidSigned-off-by:
-
Johannes Berg authored
As the 802.11 spec evolves, we need to parse more and more elements. This is causing the struct to grow, and we can no longer get away with putting it on the stack. Change the API to always dynamically allocate and return an allocated pointer that must be kfree()d later. As an alternative, I contemplated a scheme whereby we'd say in the code which elements we needed, e.g. DECLARE_ELEMENT_PARSER(elems, SUPPORTED_CHANNELS, CHANNEL_SWITCH, EXT(KEY_DELIVERY)); ieee802_11_parse_elems(..., &elems, ...); and while I think this is possible and will save us a lot since most individual places only care about a small subset of the elements, it ended up being a bit more work since a lot of places do the parsing and then pass the struct to other functions, sometimes with multiple levels. Link: https://lore.kernel.org/r/20210920154009.26caff6b5998.I05ae58768e990e611aee8eca8abefd9d7bc15e05@changeidSigned-off-by: -
Johannes Berg authored
There's no need to parse all elements etc. just to find the authentication challenge - use cfg80211_find_elem() instead. This also allows us to remove WLAN_EID_CHALLENGE handling from the element parsing entirely. Link: https://lore.kernel.org/r/20210920154009.45f9b3a15722.Ice3159ffad03a007d6154cbf1fb3a8c48489e86f@changeidSigned-off-by:
-
Johannes Berg authored
We're currently returning this value, but to prepare for returning the allocated structure, move it into there. Link: https://lore.kernel.org/r/20210920154009.479b8ebf999d.If0d4ba75ee38998dc3eeae25058aa748efcb2fc9@changeidSigned-off-by:
-
Johannes Berg authored
We currently pass the entire elements to the rx_bcn_presp() method, but only need mesh_config. Additionally, we use the length of the elements to calculate back the entire frame's length, but that's confusing - just pass the length of the frame instead. Link: https://lore.kernel.org/r/20210920154009.a18ed3d2da6c.I1824b773a0fbae4453e1433c184678ca14e8df45@changeidSigned-off-by:
-
Johannes Berg authored
We put a few large buffers on the stack here, but it's easy to just allocate them on the heap, so do that. Link: https://lore.kernel.org/r/20210920154009.1387f44e7382.Ife043c169e6a44edace516fea9f8311a5ca4282a@changeidSigned-off-by:
-
Len Baker authored
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, use the struct_size() helper to do the arithmetic instead of the argument "size + count * size" in the kzalloc() functions. Also, take the opportunity to refactor the memcpy() call to use the flex_array_size() helper. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-argumentsSigned-off-by:
Len Baker <len.baker@gmx.com> Link: https://lore.kernel.org/r/20210919114040.41522-1-len.baker@gmx.com [remove unnecessary variable] Signed-off-by:
-
Lorenzo Bianconi authored
Check twt_responder in ieee80211_process_rx_twt_action routine in order to take into account the case where twt has been disabled in hostapd configuration. Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/516057fe4ca73ad257e8c2762e25f4b7872957fc.1630051438.git.lorenzo@kernel.orgSigned-off-by:
-
Johannes Berg authored
When we generate the code for built-in certificates, honour the V=1 build option to print out the script doing it. Signed-off-by:
-
- 22 Sep, 2021 6 commits
-
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Alter trap adjacency entry allocation scheme In commit 0c3cbbf9 ("mlxsw: Add specific trap for packets routed via invalid nexthops"), mlxsw started allocating a new adjacency entry during driver initialization, to trap packets routed via invalid nexthops. This behavior was later altered in commit 983db619 ("mlxsw: spectrum_router: Allocate discard adjacency entry when needed") to only allocate the entry upon the first route that requires it. The motivation for the change is explained in the commit message. The problem with the current behavior is that the entry shows up as a "leak" in a new BPF resource monitoring tool [1]. This is caused by the asymmetry of the allocation/free scheme. While the entry is allocated upon the first route that requires it, it is only freed during de-initialization of the driver. Instead, this patchset tracks the number of active nexthop groups and allocates the adjacency entry upon the creation of the first group. The entry is freed when the number of active groups reaches zero. Patch #1 adds the new entry. Patch #2 converts mlxsw to start using the new entry and removes the old one. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Start using the trap adjacency entry that was added in the previous patch and remove the existing one which is no longer needed. Note that the name of the old entry was inaccurate as the entry did not discard packets, but trapped them. Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
-
Ido Schimmel authored
In commit 0c3cbbf9 ("mlxsw: Add specific trap for packets routed via invalid nexthops"), mlxsw started allocating a new adjacency entry during driver initialization, to trap packets routed via invalid nexthops. This behavior was later altered in commit 983db619 ("mlxsw: spectrum_router: Allocate discard adjacency entry when needed") to only allocate the entry upon the first route that requires it. The motivation for the change is explained in the commit message. The problem with the current behavior is that the entry shows up as a "leak" in a new BPF resource monitoring tool [1]. This is caused by the asymmetry of the allocation/free scheme. While the entry is allocated upon the first route that requires it, it is only freed during de-initialization of the driver. Instead, track the number of active nexthop groups and allocate the adjacency entry upon the creation of the first group. Free it when the number of active groups reaches zero. The next patch will convert mlxsw to start using the new entry and remove the old one. [1] https://github.com/Mellanox/mlxsw/tree/master/Debugging/libbpf-tools/resmonSigned-off-by:
-
M Chetan Kumar authored
1> Function comments moved to .c file. 2> Use literals in return to improve readability. 3> Do error handling check instead of success check. 4> Redundant ret assignment removed. Signed-off-by:
M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by:
-
Li RongQing authored
Avoid to call ksize again in __build_skb_around by passing the result of data ksize to __build_skb_around nginx stress test shows this change can reduce ksize cpu usage, and give a little performance boost Signed-off-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
-
Leon Romanovsky authored
devlink_register() can't fail and always returns success, but all drivers are obligated to check returned status anyway. This adds a lot of boilerplate code to handle impossible flow. Make devlink_register() void and simplify the drivers that use that API call. Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Acked-by:
Simon Horman <simon.horman@corigine.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> # dsa Reviewed-by:
-
