- 28 May, 2014 8 commits
-
-
Tero Kristo authored
Composite interface clock is needed by OMAP2, but it was only built in for OMAP3. Fixed the conditional build flag checks for this. Signed-off-by: Tero Kristo <t-kristo@ti.com>
-
Tero Kristo authored
The clock and clkdev for this are added manually. Signed-off-by: Tero Kristo <t-kristo@ti.com>
-
Tero Kristo authored
Adds support for registering the alias clocks, boot time clock-enable list and disabling autoidle of clocks. Signed-off-by: Tero Kristo <t-kristo@ti.com>
-
Tero Kristo authored
OMAP2430 I2CHS modules require specific hardware ops to be used, so added a new compatible string for this. Signed-off-by: Tero Kristo <t-kristo@ti.com>
-
Tero Kristo authored
ti,composite-gate-clock documentation was missing, also the register offset examples were wrong. Signed-off-by: Tero Kristo <t-kristo@ti.com>
-
Tero Kristo authored
This patch adds support for omap2 type aplls, which have gating and autoidle functionality. Signed-off-by: Tero Kristo <t-kristo@ti.com>
-
Tero Kristo authored
OMAP2 has slightly different DPLL compared to later OMAP generations. This patch adds support for the ti,omap2-dpll-core-clock and also adds the bindings documentation. Signed-off-by: Tero Kristo <t-kristo@ti.com>
-
Tero Kristo authored
AMxxxx dpll_data previously had autoidle_mask set, even if these SoC:s don't have autoidle register. Remove the bit-field value as it is unused, also drop the unnecessary DPLL_HAS_AUTOIDLE flag passing during init, as we can just simply check against the contents of the autoidle_mask. Signed-off-by: Tero Kristo <t-kristo@ti.com>
-
- 28 Apr, 2014 1 commit
-
-
Linus Torvalds authored
-
- 27 Apr, 2014 11 commits
-
-
Will Deacon authored
The asm-generic, big-endian version of zero_bytemask creates a mask of bytes preceding the first zero-byte by left shifting ~0ul based on the position of the first zero byte. Unfortunately, if the first (top) byte is zero, the output of prep_zero_mask has only the top bit set, resulting in undefined C behaviour as we shift left by an amount equal to the width of the type. As it happens, GCC doesn't manage to spot this through the call to fls(), but the issue remains if architectures choose to implement their shift instructions differently. An example would be arch/arm/ (AArch32), where LSL Rd, Rn, #32 results in Rd == 0x0, whilst on arch/arm64 (AArch64) LSL Xd, Xn, #64 results in Xd == Xn. Rather than check explicitly for the problematic shift, this patch adds an extra shift by 1, replacing fls with __fls. Since zero_bytemask is never called with a zero argument (has_zero() is used to check the data first), we don't need to worry about calling __fls(0), which is undefined. Cc: <stable@vger.kernel.org> Cc: Victor Kamensky <victor.kamensky@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
This merges the patch to fix possible loss of dirty bit on munmap() or madvice(DONTNEED). If there are concurrent writers on other CPU's that have the unmapped/unneeded page in their TLBs, their writes to the page could possibly get lost if a third CPU raced with the TLB flush and did a page_mkclean() before the page was fully written. Admittedly, if you unmap() or madvice(DONTNEED) an area _while_ another thread is still busy writing to it, you deserve all the lost writes you could get. But we kernel people hold ourselves to higher quality standards than "crazy people deserve to lose", because, well, we've seen people do all kinds of crazy things. So let's get it right, just because we can, and we don't have to worry about it. * safe-dirty-tlb-flush: mm: split 'tlb_flush_mmu()' into tlb flushing and memory freeing parts
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: limit the path size in send to PATH_MAX Btrfs: correctly set profile flags on seqlock retry Btrfs: use correct key when repeating search for extent item Btrfs: fix inode caching vs tree log Btrfs: fix possible memory leaks in open_ctree() Btrfs: avoid triggering bug_on() when we fail to start inode caching task Btrfs: move btrfs_{set,clear}_and_info() to ctree.h btrfs: replace error code from btrfs_drop_extents btrfs: Change the hole range to a more accurate value. btrfs: fix use-after-free in mount_subvol()
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull arm fixes from Russell King: "A number of fixes for the PJ4/iwmmxt changes which arm-soc forced me to take during the merge window. This stuff should have been better tested and sorted out *before* the merge window" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8042/1: iwmmxt: allow to build iWMMXt on Marvell PJ4B ARM: 8041/1: pj4: fix cpu_is_pj4 check ARM: 8040/1: pj4: properly detect existence of iWMMXt coprocessor ARM: 8039/1: pj4: enable iWMMXt only if CONFIG_IWMMXT is set ARM: 8038/1: iwmmxt: explicitly check for supported architectures
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: - compat renameat2 syscall wiring and __NR_compat_syscalls fix - TLB fix for transparent huge pages following switch to generic mmu_gather - spinlock initialisation for init_mm's context - move of_clk_init() earlier - Kconfig duplicate entry fix * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: init: Move of_clk_init to time_init arm64: initialize spinlock for init_mm's context arm64: debug: remove noisy, pointless warning arm64: mm: Add THP TLB entries to general mmu_gather arm64: add renameat2 compat syscall ARM64: Remove duplicated Kconfig entry for "kernel/power/Kconfig" arm64: __NR_compat_syscalls fix
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "A slighlty large fix for a subtle issue in the CPU hotplug code of certain ARM SoCs, where the not yet online cpu needs to setup the cpu local timer and needs to set the interrupt affinity to itself. Setting interrupt affinity to a not online cpu is prohibited and therefor the timer interrupt ends up on the wrong cpu, which leads to nasty complications. The SoC folks tried to hack around that in the SoC code in some more than nasty ways. The proper solution is to have a way to enforce the affinity setting to a not online cpu. The core patch to the genirq code provides that facility and the follow up patches make use of it in the GIC interrupt controller and the exynos timer driver. The change to the core code has no implications to existing users, except for the rename of the locked function and therefor the necessary fixup in mips/cavium. Aside of that, no runtime impact is possible, as none of the existing interrupt chips implements anything which depends on the force argument of the irq_set_affinity() callback" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: Exynos_mct: Register clock event after request_irq() clocksource: Exynos_mct: Use irq_force_affinity() in cpu bringup irqchip: Gic: Support forced affinity setting genirq: Allow forcing cpu affinity of interrupts
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are a few tty/serial fixes for 3.15-rc3 that resolve a number of reported issues in the 8250 and samsung serial drivers, as well as a character loss fix for the tty core that was caused by the lock removal patches a release ago" * tag 'tty-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial_core: fix uart PORT_UNKNOWN handling serial: samsung: Change barrier() to cpu_relax() in console output serial: samsung: don't check config for every character serial: samsung: Use the passed in "port", fixing kgdb w/ no console serial: 8250: Fix thread unsafe __dma_tx_complete function 8250_core: Fix unwanted TX chars write tty: Fix race condition between __tty_buffer_request_room and flush_to_ldisc
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging / IIO driver fixes from Greg KH: "Here are some small staging and IIO driver fixes for 3.15-rc3. Nothing major at all, just some assorted issues that people have reported" * tag 'staging-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: comedi: usbdux: bug fix for accessing 'ao_chanlist' in private data iio: adc: mxs-lradc: fix warning when buidling on avr32 iio: cm36651: Fix i2c client leak and possible NULL pointer dereference iio: querying buffer scan_mask should return 0/1 staging:iio:ad2s1200 fix a missing break iio: adc: at91_adc: correct default shtim value ARM: at91: at91sam9260: change at91_adc name ARM: at91: at91sam9g45: change at91_adc name iio: cm32181: Fix read integration time function iio: adc: at91_adc: Repair broken platform_data support
-
Linus Torvalds authored
Merge tag 'driver-core-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are some kernfs fixes for 3.15-rc3 that resolve some reported problems. Nothing huge, but all needed" * tag 'driver-core-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: s390/ccwgroup: Fix memory corruption kernfs: add back missing error check in kernfs_fop_mmap() kernfs: fix a subdir count leak
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are a number of USB fixes for 3.15-rc3. The majority are gadget fixes, as we didn't get any of those in for 3.15-rc2. The others are all over the place, and there's a number of new device id addtions as well." * tag 'usb-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits) usb: option: add and update a number of CMOTech devices usb: option: add Alcatel L800MA usb: option: add Olivetti Olicard 500 usb: qcserial: add Sierra Wireless MC7305/MC7355 usb: qcserial: add Sierra Wireless MC73xx usb: qcserial: add Sierra Wireless EM7355 USB: io_ti: fix firmware download on big-endian machines usb/xhci: fix compilation warning when !CONFIG_PCI && !CONFIG_PM xhci: extend quirk for Renesas cards xhci: Switch Intel Lynx Point ports to EHCI on shutdown. usb: xhci: Prefer endpoint context dequeue pointer over stopped_trb phy: core: make NULL a valid phy reference if !CONFIG_GENERIC_PHY phy: fix kernel oops in phy_lookup() phy: restore OMAP_CONTROL_PHY dependencies phy: exynos: fix building as a module USB: serial: fix sysfs-attribute removal deadlock usb: wusbcore: fix panic in wusbhc_chid_set usb: wusbcore: convert nested lock to use spin_lock instead of spin_lock_irq uwb: don't call spin_unlock_irq in a USB completion handler usb: chipidea: coordinate usb phy initialization for different phy type ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI and power management fixes from Rafael Wysocki: "These include a fix for a recent ACPI regression related to device notifications, intel_idle fix related to IvyTown support, fix for a buffer size issue in ACPICA, PM core fix related to the "freeze" sleep state, four fixes for various types of breakage in cpufreq drivers, a PNP workaround for a wrong memory region size in ACPI tables, and a fix and cleanup for the ACPI tools Makefile. Specifics: - Fix for broken ACPI notifications on some systems caused by a recent ACPI hotplug commit that blocked the propagation of unknown type notifications to device drivers inadvertently. - intel_idle fix to make the IvyTown C-states handling (added recently) work as intended which now is broken due to missing braces. From Christoph Jaeger. - ACPICA fix to make it allocate buffers of the right sizes for the Generic Serial Bus operation region access. From Lv Zheng. - PM core fix unblocking cpuidle before entering the "freeze" sleep state which causes that state to be able to actually save more energy than runtime idle. - Configuration and build fixes for the highbank and powernv cpufreq drivers from Kefeng Wang and Srivatsa S Bhat. - Coccinelle warning fix related to error pointers for the unicore32 cpufreq driver from Duan Jiong. - Integer overflow fix for the ppc-corenet cpufreq driver from Geert Uytterhoeven. - Workaround for BIOSes that don't report the entire Intel MCH area in their ACPI tables from Bjorn Helgaas. - ACPI tools Makefile fix and cleanup from Thomas Renninger" * tag 'pm+acpi-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / notify: Do not block unknown type notifications in root handler PNP: Work around BIOS defects in Intel MCH area reporting cpufreq: highbank: fix ARM_HIGHBANK_CPUFREQ dependency warning cpufreq: ppc: Fix integer overflow in expression cpufreq, powernv: Fix build failure on UP cpufreq: unicore32: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO PM / suspend: Make cpuidle work in the "freeze" state intel_idle: fix IVT idle state table setting ACPICA: Fix buffer allocation issue for generic_serial_bus region accesses. tools/power/acpi: Minor bugfixes
-
- 26 Apr, 2014 1 commit
-
-
Chris Mason authored
fs_path_ensure_buf is used to make sure our path buffers for send are big enough for the path names as we construct them. The buffer size is limited to 32K by the length field in the struct. But bugs in the path construction can end up trying to build a huge buffer, and we'll do invalid memmmoves when the buffer length field wraps. This patch is step one, preventing the overflows. Signed-off-by: Chris Mason <clm@fb.com>
-
- 25 Apr, 2014 19 commits
-
-
Linus Torvalds authored
The mmu-gather operation 'tlb_flush_mmu()' has done two things: the actual tlb flush operation, and the batched freeing of the pages that the TLB entries pointed at. This splits the operation into separate phases, so that the forced batched flushing done by zap_pte_range() can now do the actual TLB flush while still holding the page table lock, but delay the batched freeing of all the pages to after the lock has been dropped. This in turn allows us to avoid a race condition between set_page_dirty() (as called by zap_pte_range() when it finds a dirty shared memory pte) and page_mkclean(): because we now flush all the dirty page data from the TLB's while holding the pte lock, page_mkclean() will be held up walking the (recently cleaned) page tables until after the TLB entries have been flushed from all CPU's. Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Dave Hansen <dave.hansen@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Rafael J. Wysocki authored
* pnp: PNP: Work around BIOS defects in Intel MCH area reporting * acpi-hotplug: ACPI / notify: Do not block unknown type notifications in root handler
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
Pull hwmon fixes from Guenter Roeck: - ltc2945: Don't unecessarily crash kernel on implementation error - vexpress: Fix 'name' and 'label' attributes * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ltc2945) Don't crash the kernel unnecessarily hwmon: (vexpress) Avoid creating non-existing attributes hwmon: (vexpress) Use legal hwmon device names
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is a set of seven fixes, three (hpsa) and free'd command references correcting bugs in the last round of updates and the remaining four correcting problems within the SCSI error handler that was causing a deadlock within USB" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] More USB deadlock fixes [SCSI] Fix USB deadlock caused by SCSI error handling [SCSI] Fix command result state propagation [SCSI] Fix spurious request sense in error handling [SCSI] don't reference freed command in scsi_prep_return [SCSI] don't reference freed command in scsi_init_sgtable [SCSI] hpsa: fix NULL dereference in hpsa_put_ctlr_into_performant_mode()
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "Since we didn't get around to collect fixes in time for -rc2 over the easter vacation, this one is unfortunately a bit larger than we'd like for an -rc3 merge. A large set of the changes is in the device tree sources, so I'm splitting out the description between code changes and DT changes. Aside from omap and versatile express, the actual code bugs are and trivial. Here is an overview: imx: - fix video clock settings - fix one clock refcounting bug omap: - update defconfig for renamed USB PHY driver - fix error handling in gpmc - fix N900 video initialization regression - fix reression in hwmod code from missing braces - fix am43xx and omap3 clocks - remove bogus write to voltage control register pxa: - fix build regression from 3.13 header cleanup rockchip: - fix a misleading printk string shmobile: - fix incorrect sound setting on multiple machines spear: - remove incorrect __init section annotation tegra: - remove a stale Kconfig entry u300: - update defconfig ux500: - enable common wireless and sensor drivers in defconfig - more defconfig updates vexpress: - fix voltage calculation for opp - fix reboot hang and warning - fix out-of-bounds array access - improve error handling in clock driver overall: - always select CLKSRC_OF in multiplatform builds And these are the devicetree related changes: imx: - add missing #clock-cell properties - fix pinctrl setting in imx6sl-evk - fix video endpoint on imx53 - remove obsolete lvds-channel nodes (multiple patches) - add missing second stmpe node - fix usb host mode on dmo-edmqmx6 (multiple patches) - fix gic node #address-cells to match usage - add missing legacy IRQ map for PCIe - fix microsom pincontrol setting for rgmii - fix fatal typo in touchscreen DT usage for mx5 - list all RAM present on m53evk and mx53qsb omap: - fix bug in DT handling of gpmc external bus - add DT for older revision of beagleboard - fix regression after DT node name fixes - remove obsolete properties for gpmc - fix pinmux comment to match DT it refers to - fix newly added dra7xx clock node data - add missing clock for USB PHY mvebu: - add missing clock for mdio node - fix nonstandard vendor prefixes on i2c nodes rockchip: - fix pin control setting for uart shmobile: - fix typo in DT data for pin control (multiple patches) - fix gic node #address-cells to match usage tegra: - fix clock and uart DT representation to match hardware zynq: - add DT nodes for newly added driver - add DT properties required for cpufreq-ondemand overall: - restore alphabetic order in Makefile - grammar fixes in bindings" * tag 'fixes-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (66 commits) ARM: vexpress/TC2: Convert OPP voltage to uV before storing power/reset: vexpress: Fix restart/power off operation dt: tegra: remove non-existent clock IDs clk: tegra: remove non-existent clocks ARM: tegra: remove UART5/UARTE from tegra124.dtsi ARM: tegra: remove TEGRA_EMC_SCALING_ENABLE ARM: Tidy up DTB Makefile entries ARM: fix missing CLKSRC_OF on multi-platform ARM: spear: add __init to spear_clocksource_init() ARM: pxa: hx4700.h: include "irqs.h" for PXA_NR_BUILTIN_GPIO arm/mach-vexpress: array accessed out of bounds clk: vexpress: NULL dereference on error path ARM: OMAP2+: Fix GPMC remap for devices using an offset ARM: zynq: dt: Add I2C nodes to Zynq device tree ARM: zynq: DT: Add 'clock-latency' property ARM: OMAP2+: Fix oops for GPMC free ARM: dts: Add support for the BeagleBoard xM A/B ARM: dts: Grammar /that will/it will/ ARM: dts: Grammar /is uses/ is used/ ARM: OMAP2+: Fix config name for USB3 PHY ...
-
git://git.samba.org/jlayton/linuxLinus Torvalds authored
Pull file locking fixes from Jeff Layton: "File locking related bugfixes for v3.15 (pile #2) - fix for a long-standing bug in __break_lease that can cause soft lockups - renaming of file-private locks to "open file description" locks, and the command macros to more visually distinct names The fix for __break_lease is also in the pile of patches for which Bruce sent a pull request, but I assume that your merge procedure will handle that correctly. For the other patches, I don't like the fact that we need to rename this stuff at this late stage, but it should be settled now (hopefully)" * tag 'locks-v3.15-2' of git://git.samba.org/jlayton/linux: locks: rename FL_FILE_PVT and IS_FILE_PVT to use "*_OFDLCK" instead locks: rename file-private locks to "open file description locks" locks: allow __break_lease to sleep even when break_time is 0
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd bugfixes from Bruce Fields: "Three small nfsd bugfixes (including one locks.c fix for a bug triggered only from nfsd). Jeff's patches are for long-existing problems that became easier to trigger since the addition of vfs delegation support" * 'for-3.15' of git://linux-nfs.org/~bfields/linux: Revert "nfsd4: fix nfs4err_resource in 4.1 case" nfsd: set timeparms.to_maxval in setup_callback_client locks: allow __break_lease to sleep even when break_time is 0
-
Christian Borntraeger authored
commit 0b60f9ea (s390: use device_remove_file_self() instead of device_schedule_callback()) caused random memory corruption on my s390 box. Turns out that the last element of the ccwgroup structure is of dynamic size, so we must move the newly introduced work structure _before_ the zero length array. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> CC: Tejun Heo <tj@kernel.org> CC: Martin Schwidefsky <schwidefsky@de.ibm.com> CC: Heiko Carstens <heiko.carstens@de.ibm.com> CC: Sebastian Ott <sebott@linux.vnet.ibm.com> CC: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tejun Heo authored
While updating how mmap enabled kernfs files are handled by lockdep, 9b2db6e1 ("sysfs: bail early from kernfs_file_mmap() to avoid spurious lockdep warning") inadvertently dropped error return check from kernfs_file_mmap(). The intention was just dropping "if (ops->mmap)" check as the control won't reach the point if the mmap callback isn't implemented, but I mistakenly removed the error return check together with it. This led to Xorg crash on i810 which was reported and bisected to the commit and then to the specific change by Tobias. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-bisected-by: Tobias Powalowski <tobias.powalowski@googlemail.com> Tested-by: Tobias Powalowski <tobias.powalowski@googlemail.com> References: http://lkml.kernel.org/g/533D01BD.1010200@googlemail.com Cc: stable <stable@vger.kernel.org> # 3.14 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jianyu Zhan authored
Currently kernfs_link_sibling() increates parent->dir.subdirs before adding the node into parent's chidren rb tree. Because it is possible that kernfs_link_sibling() couldn't find a suitable slot and bail out, this leads to a mismatch between elevated subdir count with actual children node numbers. This patches fix this problem, by moving the subdir accouting after the actual addtion happening. Signed-off-by: Jianyu Zhan <nasa4836@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bjørn Mork authored
A number of older CMOTech modems are based on Qualcomm chips. The blacklisted interfaces are QMI/wwan. Reported-by: Lars Melin <larsm17@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bjørn Mork authored
Device interface layout: 0: ff/ff/ff - serial 1: ff/00/00 - serial AT+PPP 2: ff/ff/ff - QMI/wwan 3: 08/06/50 - storage Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bjørn Mork authored
Device interface layout: 0: ff/ff/ff - serial 1: ff/ff/ff - serial AT+PPP 2: 08/06/50 - storage 3: ff/ff/ff - serial 4: ff/ff/ff - QMI/wwan Cc: <stable@vger.kernel.org> Reported-by: Julio Araujo <julio.araujo@wllctel.com.br> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bjørn Mork authored
Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bjørn Mork authored
Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bjørn Mork authored
Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chanho Min authored
Clock providers should be initialized before clocksource_of_init. If not, Clock source initialization can be fail to get the clock. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Chanho Min <chanho.min@lge.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
-
Johan Hovold authored
During firmware download the device expects memory addresses in big-endian byte order. As the wIndex parameter which hold the address is sent in little-endian byte order regardless of host byte order, we need to use swab16 rather than cpu_to_be16. Also make sure to handle the struct ti_i2c_desc size parameter which is returned in little-endian byte order. Reported-by: Ludovic Drolez <ldrolez@debian.org> Tested-by: Ludovic Drolez <ldrolez@debian.org> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Cohen authored
When CONFIG_PCI and CONFIG_PM are not selected, xhci.c gets this warning: drivers/usb/host/xhci.c:409:13: warning: ‘xhci_msix_sync_irqs’ defined but not used [-Wunused-function] Instead of creating nested #ifdefs, this patch fixes it by defining the xHCI PCI stubs as inline. This warning has been in since 3.2 kernel and was caused by commit 421aa841 "usb/xhci: hide MSI code behind PCI bars", but wasn't noticed until 3.13 when a configuration with these options was tried Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Cc: stable@vger.kernel.org # 3.2 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-